Frontpage > Industrial > Industrial Electrical > Acceleration Sensors

Best Acceleration Sensors - Buying Guide

Last Updated: 04/21/2019

Share on

Bestselling Acceleration Sensors on Amazon

  1. HiLetgo 3pcs GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Acceleromete...
  2. CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half-Bridge/Amplifier with 1pcs HX7...
  3. HiLetgo GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyr...
  4. DIYmall 2pcs Hx711 Weight Weighing Load Cell Conversion Module Sensors Ad Module for Arduino Microco...
  5. Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g) [ADA2809]
  6. Maxmoral 2pcs GY-521 MPU-6050 3 Axis Accelerometer Sensor Gyroscope 6DOF Module
  7. Deegoo Arduino GY-521 MPU-6050 Module 3 Axis Analog gyro sensors 3 Axis Accelerometer Module
  8. HiLetgo 6 DOF MPU6500 6-Axis Gyroscope Acceleration Sensor Module SPI/IIC Replace MPU605
  9. Degraw 40 kg Tension Load Cell and HX711 Combo Pack Kit - Load Cell Amplifier ADC Weight Sensor for ...
  10. 3-axis Accelerometer ADXL337 Breakout

  #1

HiLetgo 3pcs GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino

Model: 3-01-0122-AU-1PC   |    Mpn: 3-01-0122-AU-1PC   |    Ean: 0702082654477   |    PartNumber: 3-01-0122-AU-1PC   |   Asin: B00LP25V1A

GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino
Description:
Main Chip: MPU-6050
Power supply: 3~5V
Communication mode: standard IIC communication protocol
Chip built-in 16bit AD converter, 16bit data output
Gyroscopes range: +/- 250 500 1000 2000 degree/sec
Acceleration range: 2 4 8 16g
MPU-6050 is the world's first integrated 6 axis motion processing components, compared to many components, from the combination between the axis of gyroscope and accelerometer in bad problem, reduce the size of a large number of packaging. MPU-6050 incorporates 3 axis gyroscope, 3 axis accelerator, and can be connected by I2C ports of other accelerator, magnetic sensors, or other Digital Motion sensor processing (DMP: Digital Motion Processor) hardware acceleration, engine by the I2C port mainly in the form of a single data flow, output to the application of the complete calculus 9 shaft fusion technology.

Package included:
3* MPU6050 6-axis Accelerometer Gyroscope Sensor Module 3* Pin Header kit

Reference link: http://forum.arduino.cc/index.php?topic=153453.0 http://www.i2cdevlib.com/devices/mpu6050#source

Note: Please contact us if you need Schematic/User manual/Reference documents.

Features

  • MPU-6050 MPU6050 6-axis Accelerometer Gyroscope Sensor
  • Communication mode: standard IIC communication protocol
  • Chip built-in 16bit AD converter, 16bit data output
  • Gyroscopes range: +/- 250 500 1000 2000 degree/sec
  • Acceleration range: 2 4 8 16g
  • See more on Amazon...

Brand: HiLetgo   |   Manufacturer: HiLetgo

Package Dimensions: 0.39 x 3.27 x 5.55 inches (1.0 x 8.3 x 14.1 cm)

Amazon Price: $8.99 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half-Bridge/Amplifier with 1pcs HX711 A/D Module for Arduino

 Ean: 6941595311994   |    PartNumber: HX-2071   |   Asin: B07D6HYYSN

Description
Human Scale Load Cell Weight Weighting Sensor 50KG Half-bridge Strain Gauge Bathroom Scale
The sensor is a group of half-bridge strain gauge, there are 3 ways to use it :
1. Use one sensor with an external resistor to form a full-bridge measurement, the range of a sensor range: 50kg. External resistance on the higher requirements.
2.Use two sensors to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2 = 100kg
3.Use four sensors to form a full-bridge measurement, measuring range for the sum of four sensors: 50kgx4 = 200kg
Amplifier HX711 AD Module Strain Gauge Bathroom Scale
Features:
Two selectable differential input channels
On-chip active low noise PGA with selectable gain of 3264 and 128
On-chip power supply regulator for load-cell and ADC analog power supply
On-chip oscillator requiring no external component with optional external crystal
On-chip power-on-reset
Simple digital control and serial interface: pin-driven controlsno programming needed
Selectable 10SPS or 80SPS output data rate
Simultaneous 50 and 60Hz supply rejection
Current consumption including on-chip analog power supply regulator: normal operation Package Includes:
4 X Human Scale Load Cell 50kg
1 X HX711 AD Module

Features

  • Load cell-This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year's resolutions, and then forget about a month later).
  • HX711-This module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier. The input circuit can be configured to provide a bridge type pressure bridge (such as pressureweighing sensor mode)is of high precisionlow cost is an ideal sampling front-end module.
  • LOAD CELL SPECS - 34 mm x 34 mm
  • Hx711 SPECS-Selectable 10SPS or 80SPS output data rate;Operation supply voltage range: 2.6 ~ 5.5V
  • Package:4 x human scale load cell sensor ; 1X HX711 Module
  • See more on Amazon...

Brand: CHENBO   |   Manufacturer: CHENBO

Package Dimensions: 0.9 x 3.5 x 6.8 inches (2.3 x 8.9 x 17.3 cm)

Amazon Price: $9.99 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

HiLetgo GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino

 PartNumber: 3-01-0122-A   |   Asin: B01DK83ZYQ

GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyroscope Sensor Module 16 Bit AD Converter Data Output IIC I2C for Arduino
Description:
Main Chip: MPU-6050
Power supply: 3~5V
Communication mode: standard IIC communication protocol
Chip built-in 16bit AD converter, 16bit data output
Gyroscopes range: +/- 250 500 1000 2000 degree/sec
Acceleration range: 2 4 8 16g
MPU-6050 is the world's first integrated 6 axis motion processing components, compared to many components, from the combination between the axis of gyroscope and accelerometer in bad problem, reduce the size of a large number of packaging. MPU-6050 incorporates 3 axis gyroscope, 3 axis accelerator, and can be connected by I2C ports of other accelerator, magnetic sensors, or other Digital Motion sensor processing (DMP: Digital Motion Processor) hardware acceleration, engine by the I2C port mainly in the form of a single data flow, output to the application of the complete calculus 9 shaft fusion technology.

Package included:
1* MPU6050 6-axis Accelerometer Gyroscope Sensor Module
1* Pin Header kit

Reference link:
http://forum.arduino.cc/index.php?topic=153453.0
http://www.i2cdevlib.com/devices/mpu6050#source

Note: Please contact us if you need Schematic/User manual/Reference documents.

Features

  • MPU-6050 MPU6050 6-axis Accelerometer Gyroscope Sensor
  • Communication mode : standard IIC communication protocol
  • Chip built-in 16bit AD converter, 16bit data output
  • Gyroscopes range: +/- 250 500 1000 2000 degree/sec
  • Acceleration range : 2 4 8 16g
  • See more on Amazon...

Brand: HiLetgo   |   Manufacturer: HiLetgo

Package Dimensions: 0.25 x 2.25 x 3 inches (0.6 x 5.7 x 7.6 cm)

Amazon Price: $4.99 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

DIYmall 2pcs Hx711 Weight Weighing Load Cell Conversion Module Sensors Ad Module for Arduino Microcontroller

Model: FBA_FZ0728X2   |    Mpn: FBA_FZ0728X2   |    Ean: 0702795763015   |    PartNumber: FBA_FZ0728X2   |   Asin: B010FG9RXO

DIYmall HX711 24BIT Precision ADC Module Weight Weighting Sensor
Description: This module uses 24 high precision A/D converter chip hx711. It is a specially designed for the high precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier. The input circuit can be configured to provide a bridge type pressure bridge (such as pressureweighing sensor mode)is of high precisionlow cost is an ideal sampling front-end module.
Features:
Two selectable differential input channels
On-chip active low noise PGA with selectable gain of 3264 and 128
On-chip power supply regulator for load-cell and ADC analog power supply
On-chip oscillator requiring no external component with optional external crystal
On-chip power-on-reset
Simple digital control and serial interface: pin-driven controlsno programming needed
Selectable 10SPS or 80SPS output data rate
Simultaneous 50 and 60Hz supply rejection
Current consumption including on-chip analog power supply regulator: normal operation

Features

  • Size: 3.5CM X 2CM X 0.5CM
  • Weight: 4 Grams
  • UPC: 0702795763015
  • HX711 Weighing Sensors AD Module for Arduino Microcontroller
  • Document link: https://github.com/aguegu/ardulibs/tree/master/hx711
  • See more on Amazon...

Brand: DIYmall   |   Manufacturer: DIYmall

Item Dimensions: 1.18 x 0.39 x 1.18 inches (3.0 x 1.0 x 3.0 cm)   |   Package Dimensions: 0.24 x 3 x 4 inches (0.6 x 7.6 x 10.2 cm)

Amazon Price: $6.25 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.25

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g) [ADA2809]

Model: 2809   |    Mpn: ADA2809   |    Ean: 0604310748036   |    PartNumber: ADA2809   |   Asin: B01BU70B64

The LIS3DH is a very popular low power triple-axis accelerometer . It's low-cost, but has just about every 'extra' you'd want in an accelerometer:

Three axis sensing, 10-bit precision 2g/ 4g/ 8g/ 16g selectable scaling Both I2C (2 possible addresses) and SPI interface options Interrupt output Multiple data rate options 1 Hz to 5Khz As low as 2uA current draw (just the chip itself, not including any supporting circuitry) Tap, Double-tap, orientation & freefall detection 3 additional ADC inputs you can read over I2C To all that, we've also added:

3.3V regulator + level shifting, so you can safely use with any Arduino or microcontroller without the need for an external level shifter! We kept seeing this accelerometer in teardowns of commercial products and figured that if it's the most-commonly used accelerometer, its worth having a breakout board!

This sensor communicates over I2C or SPI (our library code supports both) so you can share it with a bunch of other sensors on the same I2C bus. There's an address selection pin so you can have two accelerometers share an I2C bus.

To get you going fast, we spun up a breakout board for this little guy. Since it's a 3V sensor, we add a low-dropout 3.3V regulator and level shifting circuitry on board. That means its perfectly safe for use with 3V or 5V power and logic. It's fully assembled and tested. Comes with a bit of 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2.5mm (0.1") mounting holes for easy attachment.

Check out our tutorial for all sorts of details, including pinouts, assembly, wiring, and more!



Features

Brand: Adafruit   |   Manufacturer: Adafruit

Item Dimensions: 0.2 x 2.56 x 3.74 inches (0.5 x 6.5 x 9.5 cm)   |   Package Dimensions: 0.3 x 3 x 4 inches (0.8 x 7.6 x 10.2 cm)

Amazon Price: $4.99 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $4.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Maxmoral 2pcs GY-521 MPU-6050 3 Axis Accelerometer Sensor Gyroscope 6DOF Module

 Ean: 0732661152889   |    PartNumber: MPU6050-2   |   Asin: B07MR679ZB

Name: MPU-6050 Module (3 Axis Gyroscope+3 Axis Accelerometer)
Chip: MPU-6050
Power Supply: 3-5V (Internal low voltage differential voltage stabilizer)
Communication Modes: Standard IIC communications protocol
Chip built-in 16bit AD converter, 16-bit data output
Gyroscope Range: +/- 250/500/1000/2000 degree/sec
Acceleration Range: +/- 2/4/8/16g
Pin Pitch: 2.54mm
PCB Type: Immersion gold
Quantity: 2pcs

Feature:
Motion processing database support Android, Linux and Windows
Programmatically controlled interrupt supports gesture recognition, pan, screen zoom in and out, scroll, rapid drop interrupt, high-G interrupt, zero-motion sensing, touch sensing and shaking sensing functions.
Up to 400kHz fast mode I2C, or 20MHz SPI serial host interface.

Application:
Motion sensing games
Augmented reality
EIS: Electronic Image Stabilization
OIS: Optical Image Stabilization
Navigator
"Zero touch" gesture user interface
Gesture shortcuts
Authentication

Fit for:
SmartPhone
Pad Device Equipment
Handheld game products
3D remote control
Portable Navigation Device

Features

  • Chip: MPU-6050, Power Supply: 3-5V, Communication Modes: Standard IIC communications protocol, Chip built-in 16bit AD converter, 16-bit data output
  • 131 LSBs/degree/sec sensitivity and full sensing range: +/- 250/500/1000/2000 degree/sec, 3 axis angular velocity sensor (Gyroscope).
  • PLC Control, Range: +/- 2, +/-4, +/-8, +/-16 g 3 Axis Accelerometer.
  • Motion processing database support Android, Linux and Windows
  • Programmatically controlled interrupt supports gesture recognition, pan, screen zoom in and out, scroll, rapid drop interrupt, high-G interrupt, zero-motion sensing, touch sensing and shaking sensing functions.
  • See more on Amazon...

Brand: Maxmoral

Package Dimensions: 0.55 x 1.81 x 3.58 inches (1.4 x 4.6 x 9.1 cm)

Amazon Price: $7.59 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Deegoo Arduino GY-521 MPU-6050 Module 3 Axis Analog gyro sensors 3 Axis Accelerometer Module

Model: NA   |    Mpn: NA   |    Ean: 0608603912197   |    PartNumber: NA   |   Asin: B07L5L1HPL

Description: The item is set MPU-6050 Module 3 Axis Gyroscope Accelerometer Module for Arduino Raspberry Pi The MPU-6050 module adopts the standard IIC communication agreement for communication and is powered by 3V-5V for sustainable use. The module is ideal for experimental and model structures with Arduino and Raspberry Pi. Technical specifications: Model: GY-521 Chip: MPU-6050 Pin spacing: about 2.54 mm Supply voltage: 3V-5V Gyroscope range: 250 500 1000 2000 / s Acceleration range: 2 4 8 16 g Material:durable metal and hard PCB board Chip built-in 16bit AD converter, 16-bit data output Communication modes: standard IIC communications protocol Package including: 1x MPU 6050 module 2x 2.54mm pin headers

Features

  • MPU-6050-Module - 3 Axis Gyroscope + 3 Axis Accelerometer Module
  • Pin Spacing : 2.54mm/0.1;Working Voltage : 3-5V
  • Chip built-in 16bit AD converter, 16-bit data output
  • Gyroscope range: 250 500 1000 2000 / s
  • Communication modes: standard IIC communications protocol
  • See more on Amazon...

Brand: Deegoo   |   Manufacturer: Deegoo

Package Dimensions: 0.39 x 2.36 x 3.15 inches (1.0 x 6.0 x 8.0 cm)

Amazon Price: $4.99 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

HiLetgo 6 DOF MPU6500 6-Axis Gyroscope Acceleration Sensor Module SPI/IIC Replace MPU605

 PartNumber: 3-01-1151   |   Asin: B01ICN5LPK

Description:
This module contains 16-bit ADC output of 3 axis accelerator and 3 axis gyro
Chip: MPU6500
Power voltage: 3 - 5V
Communication mode: I2C / SPI
Gyro range: + / -250, + / -500, + / -1000, + / -2000dps
Accelerator range: + / -2G, + / -4G, + / -8G, + / -16G
Register: 1MHz
SPI / I2C: 400KHz
Gyro working current: 3.2mA
Gyro sleeping current: 8uA
Accelerator working current: 450uA
Accelerator sleeping current: 8uA
Note:
Please contact us if you need the Schematic

Features

  • MPU6500 6-Axis Gyroscope Acceleration Sensor Module
  • Chip: MPU6500
  • Power voltage: 3 - 5V
  • Communication mode: I2C / SPI
  • Gyro range: + / -250, + / -500, + / -1000, + / -2000dps
  • See more on Amazon...

Brand: HiLetgo®   |   Manufacturer: HiLetgo®

Package Dimensions: 0.2 x 2 x 2.5 inches (0.5 x 5.1 x 6.4 cm)

Amazon Price: $6.49 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Degraw 40 kg Tension Load Cell and HX711 Combo Pack Kit - Load Cell Amplifier ADC Weight Sensor for Arduino Scale - Everything Needed for Accurate Force Measurement

 Ean: 0745560722329   |    PartNumber: T400HX   |   Asin: B07F922RZC

Package contents: 1 x Load cell 0-40KG with hooks 1 x HX711 24BIT Precision ADC Module on breakout board 10 x Breakaway header pins for HX711 connection
Everything you need to take accurate force measurements with and Arduino, Raspberry Pi, or other microcontroller in one complete package!

Information Load cell - Sturdy steel alloy construction with removable pre-attached hooks. Strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-40kg (0-88 lb). HX711 - This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any microcontroller (like an Arduino or Raspberry Pi). Load cell specs:
-Removable hooks pre-attached, 16 cm (6.25 in) hook-to-hook
-Wire leads pre-attached, 12 cm (4.5 in) long
-Load cell dims: 2.8 mm thick, 7.6 mm wide, 40 mm long (.11 in x 0.3 in x 1.56 in)
-2 mounting holes, 4.2 mm diameter, 6 mm (.25 in) distance from tip. HX711 specs:
-Operation Voltage: 2.7V-5V
-Operation Current:
Connections: Red to E+ Black to E- Green to A+ White to A-
Links to tutorials and libraries: https://www.instructables.com/id/Arduino-Scale-With-5kg-Load-Cell-and-HX711-Amplifi/ https://learn.sparkfun.com/tutorials/load-cell-amplifier-hx711-breakout-hookup-guide https://github.com/aguegu/ardulibs/tree/master/hx711

Features

  • U.S. BASED SUPPORT - contact Degraw through Amazon messages for help with setting up the kit
  • LOAD CELL - Sturdy steel alloy construction. Removable hooks pre-attached. Strain gauges pre-attached with strain relieved wires. Accurately measures forces from 0-40kg (0-88 lb).
  • HX711 - This top of the line load cell amplifier mounted on a breakout board pairs perfectly with the load cell to provide fast, accurate force measurements. It measures small changes in the resistance of the strain gauges mounted to the load cell and passes these values directly to any micro controller (like an Arduino or Raspberry Pi).
  • LOAD CELL SPECS - Removable hooks pre-attached, 16 cm (6.25 in) hook-to-hook. Wire leads pre-attached, 12 cm (4.5 in) long. Load cell dims: 2.8 mm thick, 7.6 mm wide, 40 mm long (.11 in x 0.3 in x 1.56 in). 2 mounting holes, 4.2 mm diameter, 6 mm (.25 in) distance from tip.
  • HX711 SPECS - Operation Voltage: 2.7V-5V | Operation Current: < 1.5mA | Includes breakaway headers for connection, soldering required
  • See more on Amazon...

Brand: Degraw   |   Manufacturer: Degraw

Package Dimensions: 0.8 x 2.3 x 3.3 inches (2.0 x 5.8 x 8.4 cm)

Amazon Price: $13.99 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

3-axis Accelerometer ADXL337 Breakout

 Ean: 0799430212274   |    PartNumber: SEN-12786   |   Asin: B00MIDFW82

The ADXL337 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned analog voltage outputs that measures acceleration with a full-scale range of 3g. This board has broken out all the pins you'll need to get the necessary data from the accelerometers. The breakout is perfect for applications like, disk drive protection, game controllers, and image stabilization. Getting the ADXL337 Breakout set-up is easy. Simply supply the accelerometer with power (3.3V and GND), then hookup the X, Y, and Z lines of the sensor to ADC pins on your chosen development board and you will be good to go. Bandwidths can even be selected to suit the needed application, with a range of 0.5 Hz to 1600 Hz for X and Y axes and a range of 0.5 Hz to 550 Hz for the Z axis. It should be noted that this breakout has a maximum voltage of 3.6V. Fortunately, you won't need a lot of power to make the accelerometers work. In normal operating mode they typically draw about 300 A.

Features

  • Operating Voltage: 1.8V - 3.6V
  • Typical Current: 300 A
  • Range: 3g
  • 3-axis sensing
  • Bandwidth adjustment with a single capacitor per axis
  • See more on Amazon...

Brand: SparkFun   |   Manufacturer: Sparkfun

Item Dimensions: 0.13 x 1 x 1 inches (0.3 x 2.5 x 2.5 cm)   |   Package Dimensions: 0.1 x 2 x 3.1 inches (0.3 x 5.1 x 7.9 cm)

Amazon Price: $12.45 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 4-5 business days
List Price: $12.45 | Used Price: $10.78

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Acceleration Sensor Development Tools Triple-axis Accelerometer+Magnetometer (Compass) Board - LSM303

Model: 1120   |    Mpn: ADA1120   |    Ean: 0720189972607   |    PartNumber: ADA1120   |   Asin: B0149KK6SW

He told you "Go West, young maker!" - but you don't know which way is West! Ah, if only you had this triple-axis accelerometer/magnetometer compass module. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity). The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally used to detect magnetic north. By combining this data you can then orient your project! We based this breakout on the latest version of this popular sensor, the LSM303DLHC. This compact sensor uses I2C to communicate and its very easy to use. Since it's a 3.3V max chip, we added circuitry to make it 5V-safe logic and power, for easy use with either 3 or 5V microcontrollers. Simply connect VCC to +3-5V and ground to ground. Then read data from the I2C clock and data pins. There's also a Data Ready and two Interrupt pins you can use (check the LSM303 datasheet for details) If using with an Arduino, its extra-easy to get started as we already wrote a nice little Arduino library to get you started. Simply download our library and connect the SCL pin to your Arduino's I2C clock pin, and SDA pin to your Arduino's I2C data pin and upload our test program to read out accelerometer and magnetic field data.

Features

  • Adafruit Part Number: 1120
  • Stock Type: Breakout Boards >> Accel, Gyro, and Magnetometers
  • In Stock & Ready to Ship
  • See more on Amazon...

Brand: Adafruit   |   Manufacturer: Adafruit

Package Dimensions: 0.1 x 2.5 x 3 inches (0.3 x 6.4 x 7.6 cm)

Amazon Price: $14.95 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Adafruit ADXL345 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI [ADA1231]

Model: OP-37062   |    Mpn: ADA1231   |    Ean: 0701851956071   |    PartNumber: ADA1231   |   Asin: B01BT4N9BC

Filling out our accelerometer offerings, we now have the really lovely digital ADXL345 from Analog Devices, a triple-axis accelerometer with digital I2C and SPI interface breakout. We added an on-board 3.3V regulator and logic-level shifting circuitry, making it a perfect choice for interfacing with any 3V or 5V microcontroller such as the Arduino. The sensor has three axes of measurements, X Y Z, and pins that can be used either as I2C or SPI digital interfacing. You can set the sensitivity level to either +-2g, +-4g, +-8g or +-16g. The lower range gives more resolution for slow movements, the higher range is good for high speed tracking. The ADXL345 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. Fully assembled and tested. Comes with 9 pin 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2.5mm (0.1") mounting holes for easy attachment. Get started in a jiffy with our detailed tutorial!



ADXL345 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI ( 16:05 )

Features

Brand: Adafruit   |   Manufacturer: Adafruit

Package Dimensions: 0.1 x 3.75 x 4.75 inches (0.3 x 9.5 x 12.1 cm)

Amazon Price: $18.61 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.63

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Adafruit Triple-Axis Accelerometer - 2/4/8g @ 14-bit - MMA8451

Model: ADA2019   |    Mpn: ADA2019   |    Ean: 0701851953780   |    PartNumber: ADA2019   |   Asin: B00SK8LS4Q

So many accelerometers and so little time! We've expanded our accelerometer selection even more with this high-precision and inexpensive MMA8451 Triple-Axis Accelerometer w/ 14-bit ADC. You can detect motion, tilt and basic orientation with a digital accelerometer - and the MMA8451 is a great accelerometer to start with. It has a wide usage range, from +-2g up to +-8g yet is easy to use with Arduino or another microcontroller

The MMA8451 is a miniature little accelerometer from Freescale, who are (by this point) masters at the accelerometer-design game. It's designed for use in phones, tablets, smart watches, and more, but works just as well in your Arduino project. Of the MMA8451/MMA8452/MMA8453 family, the MMA8451 is the most precise with a built in 14-bit ADC. The accelerometer also has built in tilt/orientation detection so it can tell you whether your project is being held in landscape or portrait mode, and whether it is tilted forward or back

This sensor communicates over I2C so you can share it with a bunch of other sensors on the same two I2C pins. There's an address selection pin so you can have accelerometers share an I2C bus. Please note this chip requires repeated-start I2C support (in case you are looking to port this to another processor)

To get you going fast, we spun up a breakout board for this little guy. Since it's a 3V sensor, we add a low-dropout 3.3V regulator and level shifting circuitry on board. That means its perfectly safe for use with 3V or 5V power and logic. It's fully assembled and tested. Comes with 8-pin 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2.5mm (0.1") mounting holes for easy attachment.

Check out our getting-started writeup for this little breakout at the Adafruit Learning System








Features

  • Adafruit Part Number: 2019
  • Stock Type: Breakout Boards >> Accel, Gyro, and Magnetometers
  • In Stock & Ready to Ship
  • See more on Amazon...

Brand: Adafruit   |   Manufacturer: Adafruit

Item Dimensions: 0.83 x 0.08 x 0.71 inches (2.1 x 0.2 x 1.8 cm)   |   Package Dimensions: 0.5 x 2 x 3 inches (1.3 x 5.1 x 7.6 cm)

Amazon Price: $7.95 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.44 | Used Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

WitMotion BWT901CL Bluetooth MPU9250 9-axis Gyro+Accelerometer+Magnetometer(200HZ Output) Electronic Compass Vibration Magnetic Field with Battery, Wireless Acceleration Sensor for Arduino

Model: BWT901CL   |    Mpn: Bluetooth JY-901 Gyroscope   |    Ean: 0713752277476   |    PartNumber: Bluetooth JY-901 Gyroscope   |   Asin: B01N99BUMR

Document download link:
https://wiki.wit-motion.com/english/doku.php?id=bluetooth_inclinometer

Product Description:
a. Using stamps holes gold plating, quality assurance, can be embedded in the user's PCB board
b. The module can get accurate attitude in a dynamic environment. Attitude measurement precision is 0.05degrees.
c.BWT901CL Gyroscope is good solution for angle measurement, acceleration measurement and angular velocity measurement,It packs a 3- axis gyro and a 3-axis accelerometer and 3-axis magnetic.
d.Kalman filter combines the gyro and accelerometer to get high precision angle measurement,it can be used such as four-axis flight control and self- balancing robot,depth measurement and so on.
e.Using high-precision gyro accelerometer MPU9250, read the measurement data by serial port and IIC port. With Kalman filter technology, reduce the measurement noise and improve measurement accuracy.
f.Functions: Platform leveling and stabilization, 360 vertical orientation measurement, Leveling instruments, Construction levels.

Main Features:
a.Input voltage: 3.3V-5V
b.Consumption current:

Features

  • (1) High precision Pitch Roll Yaw (X Y Z axis) Acceleration + Angular Velocity + Angle + Magnetic Field output
  • (2) Providing PC software , APP and 51 STM32, Arduino sample code
  • (3) Wireless Bluetooth serial port communication,Bluetooth connection range 10m, embedded in-built battery, also can connect with cable, professional for second-development
  • (4) The module integrated high precision gyro accelerometer and geomagnetic field sensor
  • (5) What you get: 1 x WitMotion BWT901CL bluetooth inclinometer + 1 x charging line +1 x instructions card
  • See more on Amazon...

Brand: WitMotion   |   Manufacturer: WitMotion

Package Dimensions: 0.7 x 2.9 x 5.3 inches (1.8 x 7.4 x 13.5 cm)

Amazon Price: $31.90 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $31.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Flameer GY-291 ADXL345 3 Axis Accelerometer Gyroscope Module Slope Accelerometer Gyroscope Sensor Module 16Bit AD Converter Data Output IIC I2C for Arduino

 Ean: 0762315478041   |    PartNumber: a74444d6cd1733e2e321a7c8f37bfe28   |   Asin: B07M7D7GJ8

Description:

- Using chip: ADXL345 Power supply: 3-5v Communication mode: IIC/SPI communication protocol Measurement range: 2g 16g ADXL345 is a small and slim low-power three-axis accelerometer that can accelerate up to 16g High resolution (13-bit) measurement.
- Digital output data is in 16-bit twos complement format and can be accessed via SPI (3-wire or 4-wire) or I2C digital interface. The ADXL345 is ideal for mobile applications. It measures static gravitational acceleration in tilt detection applications and also measures dynamic acceleration due to motion or shock.
- It has a high resolution (4 mg/LSB) and is capable of measuring tilt angle changes of approximately 0.25 . Digital output accelerometers such as the ADXL345 eliminate the need for analog-to-digital conversion, saving system cost and board space.
- In addition, the ADXL345 is a small, thin, ultra-low-power 3-axis accelerometer with high resolution (13-bit) and a measurement range of 16g. The digital output data is in 16-bit binary complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface. The ADXL345 is ideal for mobile applications.
- It measures static gravitational acceleration in tilt detection applications and also measures dynamic acceleration due to motion or shock. Its high resolution (3.9mg/LSB) enables measurement of tilt angle changes of less than 1.0 .

Specification:

- Material: Plastic
- Product detailed size: 3x5x1mm/0.12x0.20x0.04inch

Package Includes:

1 Piece module
1 Pin header


Your satisfaction is our priority. So we would deliver the highest quality products and services to meet your satisfaction.

Features

  • Material: Plastic
  • Product detailed size: 3x5x1mm/0.12x0.20x0.04inch
  • It has a high resolution (4 mg/LSB) and is capable of measuring tilt angle changes of approximately 0.25 . Digital output accelerometers such as the ADXL345 eliminate the need for analog-to-digital conversion, saving system cost and board space.
  • It measures static gravitational acceleration in tilt detection applications and also measures dynamic acceleration due to motion or shock. Its high resolution (3.9mg/LSB) enables measurement of tilt angle changes of less than 1.0 .
  • See more on Amazon...

Brand: Flameer   |   Manufacturer: Flameer

Amazon Price: $4.51 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $4.51

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

SMAKN GY-85 Sensor Modules Accelerometer gyroscope module with 2.5mm pin

Model: TRTV1606   |    Mpn: EDB064   |    Ean: 0709127311364   |    PartNumber: EDB064   |   Asin: B00MNZU0P0

GY-85 6DOF 9DOF IMU Sensor Module for Arduino (Works with Official Arduino Boards) Model GY-85 Quantity 1 Color Blue Material PCB Features Nine-axis module (three-axis gyroscope + triaxial accelerometer + three-axis magnetic field); Chip: ITG3205 + ADXL345 + HMC5883L; Power supply :3-5V; Communication : IIC communication protocol (fully compatible with the 3-5v System, circuit contain LLC) Application For DIY project Packing List 1 x Module 1 x Straight 2.45mm pin header 1 x Right angle 2.45mm pin header Dimensions: 0.87 in x 0.63 in x 0.12 in (2.2 cm x 1.6 cm x 0.3 cm) Weight: 1.09 oz (31 g)

Features

  • Nine-axis module (three-axis gyroscope + triaxial accelerometer + three-axis magnetic field)
  • Immersion Gold PCB process
  • Using the chip: ITG3205 + ADXL345 + HMC5883L
  • Power supply: 3-5v
  • Means of communication: IIC communication protocol,fully compatible with the 3-5v System, circuit contain LLC
  • See more on Amazon...

Brand: SMAKN   |   Manufacturer: SMAKN

Package Dimensions: 0.3 x 3.9 x 6.9 inches (0.8 x 9.9 x 17.5 cm)

Amazon Price: $35.60 | as of 04/21/2019(5:24pm pst)
Availibility:
List Price: $35.60

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

uxcell a13082300ux1431 2 Pcs Water Sensor Rainwater Module Rain Detection Module 3.3V-5V

Model: a13082300ux1431   |    Mpn: a13082300ux1431   |    Ean: 0700724295538   |    PartNumber: a13082300ux1431   |   Asin: B00GN7O7JE

Connect the 5V power supply, power indicator light, sensor board does not drop when, do output is high, the switch lights off, dripping a drop of water, do output is low, the switch indicator light,brush above water droplets, has returned to the output high state. . . AO analog output can be connected to the controller detects AD mouth drops of rain in the above size.Do TTL digital outputs can also be connected to the controller detects whether there is rain.

Features

  • Product Name : Water Sensor Moisture Sensor;Rating Voltage : 3.3V-5V
  • Min. Current : 15mA;Board Size : 5 x 4cm/0.2 x 0.16(L*W),3.2 x 1.4cm/1.3 x 0.55(L*W)
  • Materials : FR-04
  • Net Weight : 24g
  • Package Content : 2 x Water Sensor Moisture Sensor
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Item Dimensions: 0.79 x 2.76 x 4.33 inches (2.0 x 7.0 x 11.0 cm)   |   Package Dimensions: 0.7 x 4.25 x 6 inches (1.8 x 10.8 x 15.2 cm)

Amazon Price: $14.16 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.16

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

WitMotion BWT61CL Bluetooth MPU-6050 MPU6050 Gyro+Accelerometer (+-2g/4g/8g/16g) 6-Axis Digital Acceleration Sensor (TTL Serial 100HZ Output) 3-Axis Triple-Axis Gyroscope Module Tilt Angle for Arduino

 Ean: 0713752277469   |    PartNumber: JY-61 Bluetooth Gyroscope   |   Asin: B01MRPKDV9

Document download link:
https://wiki.wit-motion.com/english/doku.php?id=bluetooth_inclinometer

Product Description:
a.BWT61CL Gyroscope is good solution for angle measuring, acceleration measurement and angular velocity measurement,It packs a 3-axis gyro and a 3-axis accelerometer.
b.Kalman filter combines the gyro and accelerometer to get high precision angle measurement,it can be used such as four-axis flight control and self-balancing robot,
angle measurement and depth measuring and so on.
c.The module can get accurate attitude in a dynamic environment. Attitude measurement precision is 0.05degrees, high stability.
d.Using high-precision gyro accelerometer MPU6050, read the measurement data by serial port,No need to study complex I2C protocol of MPU6050.
e.With advanced digital filtering technology, reduce the measurement noise and improve measurement accuracy.
f.Bluetooth serial port communication wireless,also can connect to other equipment with line.

Main Feature:
a.Input voltage: 3.3V-5V
b.Consumption current: typical 15mA
c.Volume: 36mm X 51.3mm X15mm
d.Measuring: Attitude angle: 3 axis Acceleration: 3 Axis Angular Velocity: 3 Axis
e.Range: Acceleration: 16g, angular velocity: 2000 / s
f.The data output frequency 100Hz (baud rate 115200)
g. Data Interface: Serial (TTL level)
h.Baud rate 115200kps
i.Provide single-chip analytical sample code

Note:Angle of Z axis will have accumulated error, because there is no magnetic field correction

Packing list
1x BWT61CL inclinometer

Recommended serial cable :
https://www.amazon.com/dp/B01CNW061U

Features

  • (1) High precision Pitch Roll Yaw (X Y Z axis) Acceleration + Angular Velocity + Angle output
  • (2) Providing PC software , APP and 51 STM32, Arduino sample code
  • (3) Wireless Bluetooth serial port communication,Bluetooth connection range 10m, embedded in-built battery, also can connect with cable, professional for second-development
  • (4) The module integrated high precision electronic gyro and accelerometer
  • (5) What you get: 1 x WitMotion BWT61CL bluetooth inclinometer + 1 x charging line +1 x instructions card
  • See more on Amazon...

Brand: WitMotion   |   Manufacturer: WitMotion

Package Dimensions: 0.8 x 2.8 x 2.8 inches (2.0 x 7.1 x 7.1 cm)

Amazon Price: $26.90 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $26.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

5PCS HX711 Load Cell Amplifier Breakout Weight Weighing Sensors Ad Module Analog to Digital Converter, for Arduino Raspberry Pi Microcontroller

 PartNumber: ST0728X5   |   Asin: B07MTYT95R

Description:
This module uses 24 high precision A/D converter chip HX711.
It is a specially designed for the high precision electronic scale design with two analog input channel the internal integration of 128 times the programmable gain amplifier.
The input circuit can be configured to provide a bridge type pressure bridge (such as pressure weighing sensor mode)is of high precision low cost is an ideal sampling front-end module.

Features:
Two selectable differential input channels
On-chip active low noise PGA with selectable gain of 3264 and 128
On-chip power supply regulator for load-cell and ADC analog power supply
On-chip oscillator requiring no external component with optional external crystal
On-chip power-on-reset
Simple digital control and serial interface: pin-driven controls no programming needed
Selectable 10SPS or 80SPS output data rate
Simultaneous 50 and 60Hz supply rejection
Current consumption including on-chip analog power supply regulator: normal operation

Features

  • Github link https://github.com/aguegu/ardulibs/tree/master/hx711
  • Tutorial with raspberry pi: https://tutorials-raspberrypi.com/digital-raspberry-pi-scale-weight-sensor-hx711/
  • Operation supply voltage range: 2.6 ~ 5.5V
  • What you will get: 5pcs HX711 Load Cell Amplifier
  • Warranty: Lifetime warranty, any question please contact freely
  • See more on Amazon...

Brand: Stemedu   |   Manufacturer: Stemedu

Package Dimensions: 0.39 x 0.79 x 1.18 inches (1.0 x 2.0 x 3.0 cm)

Amazon Price: $7.99 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

SMAKN Arduino GY-521 MPU-6050 Module 3 axial gyroscope accelerometer stance tilt module

 Ean: 0709127312392   |    PartNumber: EDB090   |   Asin: B00FIIUA7M

GY-521 MPU-6050 Module 3 Axis Gyroscope+ 3 Axis Accelerometer Module for Arduino. MPU-6050 Accelerometer + Gyro The MPU-6050 sensor contains a MEMS accelerometer and a MEMS gyro in a single chip. It is very accurate, since it contains 16-bits analog to digital conversion hardware for each channel. Therefor it captures the x, y, and z channel at the same time. Name: MPU-6050 module (three-axis gyroscope + triaxial accelerometer) Use Chip: MPU-6050 Power supply :3-5v (internal low dropout regulator) Communication: IIC communication protocol standard 16bit AD converter-chip, 16-bit data output Gyro Range: 250 500 1000 2000 / s Acceleration range: 2 4 8 16g Using Immersion Gold PCB, welding machines to ensure quality 2.54mm pin spacing Size:2x1.6x0.1mm Application Motion sensing games Augmented Reality Electronic Image Stabilization (EIS: Electronic Image Stabilization) Optical Image Stabilization (OIS: Optical Image Stabilization) "Zero-touch" gestures User Interface Pedestrian navigation Gesture shortcuts Market: Smart phone Tablet device Handheld games 3D remote controller Portable navigation devices Packing List: 1 x MPU-6050 Module

Features

  • Use the chip: MPU-6050
  • Power supply :3-5v (internal low dropout regulator)
  • Communication modes: standard IIC communications protocol
  • Chip built-in 16bit AD converter, 16-bit data output
  • Gyroscope range: 250 500 1000 2000 / s
  • See more on Amazon...

Brand: SMAKN   |   Manufacturer: SMAKN

Package Dimensions: 0.2 x 2.2 x 6 inches (0.5 x 5.6 x 15.2 cm)

Amazon Price: $6.99 | as of 04/21/2019(5:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. HiLetgo 3pcs GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Acceleromete...
  2. CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half-Bridge/Amplifier with 1pcs HX7...
  3. HiLetgo GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyr...
  4. DIYmall 2pcs Hx711 Weight Weighing Load Cell Conversion Module Sensors Ad Module for Arduino Microco...
  5. Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g) [ADA2809]
  6. Maxmoral 2pcs GY-521 MPU-6050 3 Axis Accelerometer Sensor Gyroscope 6DOF Module
  7. Deegoo Arduino GY-521 MPU-6050 Module 3 Axis Analog gyro sensors 3 Axis Accelerometer Module
  8. HiLetgo 6 DOF MPU6500 6-Axis Gyroscope Acceleration Sensor Module SPI/IIC Replace MPU605
  9. Degraw 40 kg Tension Load Cell and HX711 Combo Pack Kit - Load Cell Amplifier ADC Weight Sensor for ...
  10. 3-axis Accelerometer ADXL337 Breakout

Most Wished For

  1. HiLetgo 3pcs GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Acceleromete...
  2. CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half-Bridge/Amplifier with 1pcs HX7...
  3. HiLetgo GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyr...
  4. DIYmall 2pcs Hx711 Weight Weighing Load Cell Conversion Module Sensors Ad Module for Arduino Microco...
  5. Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g) [ADA2809]
  6. Maxmoral 2pcs GY-521 MPU-6050 3 Axis Accelerometer Sensor Gyroscope 6DOF Module
  7. Deegoo Arduino GY-521 MPU-6050 Module 3 Axis Analog gyro sensors 3 Axis Accelerometer Module
  8. HiLetgo 6 DOF MPU6500 6-Axis Gyroscope Acceleration Sensor Module SPI/IIC Replace MPU605
  9. Degraw 40 kg Tension Load Cell and HX711 Combo Pack Kit - Load Cell Amplifier ADC Weight Sensor for ...
  10. 3-axis Accelerometer ADXL337 Breakout

Most Gifted

  1. HiLetgo 3pcs GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Acceleromete...
  2. CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half-Bridge/Amplifier with 1pcs HX7...
  3. HiLetgo GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyr...
  4. DIYmall 2pcs Hx711 Weight Weighing Load Cell Conversion Module Sensors Ad Module for Arduino Microco...
  5. Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g) [ADA2809]
  6. Maxmoral 2pcs GY-521 MPU-6050 3 Axis Accelerometer Sensor Gyroscope 6DOF Module
  7. Deegoo Arduino GY-521 MPU-6050 Module 3 Axis Analog gyro sensors 3 Axis Accelerometer Module
  8. HiLetgo 6 DOF MPU6500 6-Axis Gyroscope Acceleration Sensor Module SPI/IIC Replace MPU605
  9. Degraw 40 kg Tension Load Cell and HX711 Combo Pack Kit - Load Cell Amplifier ADC Weight Sensor for ...
  10. 3-axis Accelerometer ADXL337 Breakout

Top Selling

  1. HiLetgo 3pcs GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Acceleromete...
  2. CHENBO(TM)4Pcs 50kg Load Cell Body Scale Weight Weighting Sensor Half-Bridge/Amplifier with 1pcs HX7...
  3. HiLetgo GY-521 MPU-6050 MPU6050 3 Axis Accelerometer Gyroscope Module 6 DOF 6-axis Accelerometer Gyr...
  4. DIYmall 2pcs Hx711 Weight Weighing Load Cell Conversion Module Sensors Ad Module for Arduino Microco...
  5. Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g) [ADA2809]
  6. Maxmoral 2pcs GY-521 MPU-6050 3 Axis Accelerometer Sensor Gyroscope 6DOF Module
  7. Deegoo Arduino GY-521 MPU-6050 Module 3 Axis Analog gyro sensors 3 Axis Accelerometer Module
  8. HiLetgo 6 DOF MPU6500 6-Axis Gyroscope Acceleration Sensor Module SPI/IIC Replace MPU605
  9. Degraw 40 kg Tension Load Cell and HX711 Combo Pack Kit - Load Cell Amplifier ADC Weight Sensor for ...
  10. 3-axis Accelerometer ADXL337 Breakout



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical