Frontpage > Industrial > Industrial Electrical > Current Transducers

Best Current Transducers - Buying Guide

Last Updated: 01/17/2019

Share on


  #1

NK TECHNOLOGIES AT0-420-24L-FF Current TRANSDUCER 40V-DC 4-20MA D630896

 PartNumber: D630896-AT0-420-24L-FF   |   Asin: B07GNQG796

NK TECHNOLOGIES AT0-420-24L-FF CURRENT TRANSDUCER 40V-DC 4-20MA D630896

Features

Brand: NK Technologies   |   Manufacturer: NK TECHNOLOGIES

Item Dimensions: 1.25 x 2.25 x 3.25 inches (3.2 x 5.7 x 8.3 cm)   |   Package Dimensions: 1.25 x 2.25 x 3.25 inches (3.2 x 5.7 x 8.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

CR Magnetics CR4110-100 True RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, >= 2K Output Load, 24 VDC +/- 10%, 0-100 AAC Input Range, 0 - 5 VDC Output Range

Model: 0-5 VDC Output Range   |    Mpn: CR4110-100   |    PartNumber: CR4110-100   |   Asin: B005CWIM9M

This CR Magnetics CR4110 current transducer combines a solid-core current transformer and signal conditioner, and is suitable for use in industrial automation systems. The transducer provides average root-mean-square (RMS) measurement for sinusoidal alternating current waveforms, with an accuracy of 0.5% full scale (FS) and a response time of 250 ms (10-90% step change). Signal output is 0-5 volts direct current (VDC). Mounting options include DIN rail or panel. This current transducer is Underwriters Laboratories (UR) Recognized and Conformit Europ enne (CE) certified for quality assurance. It is suitable for monitoring linear, constant-speed alternating current (AC) loads that produce sinusoidal waveforms.

Specifications Signal Output 0-5 VDC Frequency Range 20-5,000 Hz Insulation Voltage 2,500 VDC Output Loading 2 K ohm minimum Operating Temperature 0 C to 60 C Current transducers are used to detect electrical current flowing in a wire or cable, and to generate an electrical signal proportional to the current for measurement or control. The transducer consists of an electrical winding, a magnetic core, and a signal conditioner. When current flows through a wire, the transducer winding generates a current, which produces a magnetic field in the core, which then creates a proportional current or voltage output signal. Current transducers are used in industrial automation systems for monitoring, alarming, and equipment control.

CR Magnetics manufactures electrical sensors, indicators, and displays. The company, founded in 2004, is headquartered in Saint Louis, MO.

Features

  • True RMS measurement for distorted alternating current waveforms
  • 0.5% accuracy
  • Response time of 250 ms (10-90% step change)
  • DIN rail or panel mounting options
  • UL Recognized and CE certified for quality assurance
  • See more on Amazon...

Brand: CR Magnetics   |   Manufacturer: CR Magnetics

Package Dimensions: 1.7 x 4 x 4.2 inches (4.3 x 10.2 x 10.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Veris,Current Xducer,SplitCor,0-120A,4-20mA, H921

Model: H921   |    Mpn: H921   |    PartNumber: H921   |   Asin: B008HOYDTK

Sensor Power 30mA (max)@12-30VDCInsulation Class 600VAC rms (UL) 300VAC RMS (CE)Frequency 50/60Hz Temperature Range -15 to 60 C (5 to 140 F)Humidity Range 10-90% RH non-condensingAccuracy 2%FS from 10% - 100% of selected range but not less than 0.4A Response Time 2 sec.Terminal Block Maximum Wire Size 14 AWGTerminal Block Torque (nominal) 4 in-lbs (0.45 N-m)Agency Approvals UL 508 open device listing CE: EN61010-1:2001-2 CAT III deg. 2 basic insulationFor applications requiring double or reinforced insulation please contact the factory.

Features

  • The Hawkeye 921 provides accurate load trending information with a proportional 4-20mA output signal
  • Preset slide-switches provide easy field setup of sensed amperage range with no need for jumpers
  • APPLICATIONSLoad trendingMotor controlFan/Pump StatusLoop powered analog current sensor simplifies installationPower the sensor, and receive the signal with only two wires
  • lower cabling and commissioning costs than with traditional 3-wire sensorsSelf-gripping split-core for fast retrofit installation
  • See more on Amazon...

Brand: Veris   |   Manufacturer: Veris

Amazon Price: $72.20 | as of 01/17/2019(12:49pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $72.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

CR Magnetics CR4480-15 Average RMS AC Current Transducer with 3 Element, 20 Hz - 4 KHz, 0 - 300 Output Load, 24 VDC +/-10%, 0-15 AAC Input Range, 4 - 20 mADC Output Range

Model: 4-20 mADC Output Range   |    Mpn: CR4480-15   |    PartNumber: CR4480-15   |   Asin: B005CWL06E

This CR Magnetics CR4480 current transducer combines a solid-core current transformer and signal conditioner, and is suitable for use in industrial automation systems. The transducer provides average root-mean-square (RMS) measurement for sinusoidal alternating current waveforms, with an accuracy of 0.5% full scale (FS) and a response time of 250 ms (10-90% step change). Three core elements allow for measurement of three-phase power loads. Mounting options include DIN rail or panel. This current transducer is Underwriters Laboratories (UR) Recognized and Conformit Europ enne (CE) certified for quality assurance. It is suitable for monitoring linear, constant-speed alternating current (AC) loads that produce sinusoidal waveforms.

Specifications Signal Output 4-20 mADC Frequency Range 50-400 Hz Insulation Voltage 2,500 VDC Output Loading 0-300 ohms Operating Temperature 0 C to 60 C Current transducers are used to detect electrical current flowing in a wire or cable, and to generate an electrical signal proportional to the current for measurement or control. The transducer consists of an electrical winding, a magnetic core, and a signal conditioner. When current flows through a wire, the transducer winding generates a current, which produces a magnetic field in the core, which then creates a proportional current or voltage output signal. Current transducers are used in industrial automation systems for monitoring, alarming, and equipment control.

CR Magnetics manufactures electrical sensors, indicators, and displays. The company, founded in 2004, is headquartered in Saint Louis, MO.

Features

  • Average RMS measurement for sinusoidal alternating current waveforms
  • 0.5% accuracy
  • Response time of 250 ms (10-90% step change)
  • Three-element core for measurement of three-phase power loads
  • UL Recognized and CE certified for quality assurance
  • See more on Amazon...

Brand: CR Magnetics   |   Manufacturer: CR Magnetics

First Available: 2017-03-12

Amazon Price: $218.02 | as of 01/17/2019(12:49pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $218.02

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

ACI A/CTA-50 : Current Transducer 4-20mA Output

 PartNumber: A/CTA-50   |   Asin: B009XEUAXG

Current sensor monitors the current flowing to electrical equipment or buildings. The magnitude of this current is then converted into a linear and proportional 4 to 20 mA output signal, which can be monitored by your Building Management, DDC, or PLC cont

Features

  • Monitors the current flowing to electrical equipment or buildings
  • Jumper selectable input ranges
  • See more on Amazon...

Brand: ACI   |   Manufacturer: ACI

Amazon Price: $47.00 | as of 01/17/2019(12:49pm pst)
Availibility: Usually ships in 3-4 business days
List Price: $47.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Amprobe DM-CT-100 Current Transducer

Model: DM-CT-100   |    Mpn: 2732730   |    Ean: 0095969367790   |    PartNumber: 2732730   |   Asin: B0029XMTI2

The Amprobe DM-CT-100 current transducer measures and reduces electrical current in high-voltage wires and cables for safe testing. It is used with an Amprobe DM-III Multitest Power Quality Recorder (sold separately). The unit measures current from 0.5 to 100A with an output sensitivity of 10mV/A. The jaws open far enough to perform tests on conductors up to 0.59 (15mm) in diameter and bus bars 0.59 x 0.67 inches (15 x 17mm).

Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.

Features

  • Current transducer converts high-current to low-current input for inputting directly into a test instrument
  • Works with the Amprobe DM-III Multitest Power Quality Recorder (sold separately)
  • Assesses current from 0.5 to 100A, with an output sensitivity of 10mV/A, on conductors up to 0.59 (15mm) in diameter
  • See more on Amazon...

Brand: Amprobe   |   Manufacturer: Amprobe

Package Dimensions: 1.1 x 4.1 x 5.8 inches (2.8 x 10.4 x 14.7 cm)

Amazon Price: $198.55 | as of 01/17/2019(12:49pm pst)
Availibility: Usually ships in 4-5 business days
List Price: $198.55

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

CR Magnetics CR4111-100 True RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, >= 2K Output Load, 24 VDC +/-10%, 0-100 AAC Input Range, 0 - 10 VDC Output Range

Model: 0-10 VDC Output Range   |    Mpn: CR4111-100   |    PartNumber: CR4111-100   |   Asin: B005CWJ9P8

This CR Magnetics current transducer combines a solid-core current transformer and signal conditioner, and is suitable for use in industrial automation systems. The transducer provides average root-mean-square (RMS) measurement for sinusoidal alternating current waveforms, with an accuracy of 0.5% full scale (FS) and a response time of 250 ms (10-90% step change). Signal output is 0-10 volts direct current (VDC).Mounting options include DIN rail or panel. This current transducer is Underwriters Laboratories (UR) Recognized and Conformit Europ enne (CE) certified for quality assurance. It is suitable for monitoring linear, constant-speed alternating current (AC) loads that produce sinusoidal waveforms.

Specifications Signal Output 0-10 VDC Frequency Range 20-5,000 Hz Insulation Voltage 2,500 VDC Output Loading 2 K ohm minimum Operating Temperature 0 C to 60 C Current transducers are used to detect electrical current flowing in a wire or cable, and to generate an electrical signal proportional to the current for measurement or control. The transducer consists of an electrical winding, a magnetic core, and a signal conditioner. When current flows through a wire, the transducer winding generates a current, which produces a magnetic field in the core, which then creates a proportional current or voltage output signal. Current transducers are used in industrial automation systems for monitoring, alarming, and equipment control.

CR Magnetics manufactures electrical sensors, indicators, and displays. The company, founded in 2004, is headquartered in Saint Louis, MO.

Features

  • True RMS measurement for distorted alternating current waveforms
  • 0.5% accuracy
  • Response time of 250 ms (10-90% step change)
  • DIN rail or panel mounting options
  • UL Recognized and CE certified for quality assurance
  • See more on Amazon...

Brand: CR Magnetics   |   Manufacturer: CR Magnetics

Amazon Price: $252.47 | as of 01/17/2019(12:49pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $252.47

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

CR Magnetics CR5210-100 DC Current Transducer with Single Element, DC, >=2K Output Load, 24 VDC +/-10%, 0-100 ADC Input Range, +/-5 VDC Output Range

Model: +/- 5 VDC Output Range   |    Mpn: CR5210-100   |    PartNumber: CR5210-100   |   Asin: B005CWLL4U

This CR Magnetics CR5210 series current transducer combines a solid-core current transformer and signal conditioner, and is suitable for use in industrial automation systems. The transducer provides magnetic modulator measurement for direct currents, with an accuracy of 1.0% full scale (FS) and a response time of 250 ms (10-90% step change). Mounting options include DIN rail or panel. This current transducer is Restriction of Hazardous Substances (RoHS) compliant for environmental protection. It is suitable for monitoring direct current (DC) loads.

Specifications Frequency Range DC (0 Hz) Insulation Voltage 2,500 VDC Output Loading 2 K ohm minimum* Operating Temperature 0 C to 50 C * 0-300 ohms maximum for 4-20 mADC output models

Current transducers are used to detect electrical current flowing in a wire or cable, and to generate an electrical signal proportional to the current for measurement or control. The transducer consists of an electrical winding, a magnetic core, and a signal conditioner. When current flows through a wire, the transducer winding generates a current, which produces a magnetic field in the core, which then creates a proportional current or voltage output signal. Current transducers are used in industrial automation systems for monitoring, alarming, and equipment control.

CR Magnetics manufactures electrical sensors, indicators, and displays. The company, founded in 2004, is headquartered in Saint Louis, MO.

Features

  • Magnetic modulator measurement for direct currents
  • 1.0% accuracy
  • Response time of 250 ms (10-90% step change)
  • DIN rail or panel mounting options
  • RoHS compliant for environmental protection
  • See more on Amazon...

Brand: CR Magnetics   |   Manufacturer: CR Magnetics

Package Dimensions: 1.7 x 4.1 x 4.3 inches (4.3 x 10.4 x 10.9 cm)

Amazon Price: $116.26 | as of 01/17/2019(12:49pm pst)
Availibility: Usually ships in 24 hours
List Price: $129.60

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

General Electric GE CTP-0 600:5 Current Transformer D660470

 PartNumber: D660470-CTP-0   |   Asin: B07MSLW6GZ

GENERAL ELECTRIC GE CTP-0 600:5 CURRENT TRANSFORMER D660470

Features

Brand: GE   |   Manufacturer: GENERAL ELECTRIC GE

Item Dimensions: 5.5 x 8 x 11.5 inches (14.0 x 20.3 x 29.2 cm)   |   Package Dimensions: 5.5 x 8 x 11.5 inches (14.0 x 20.3 x 29.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

DAYKIN D.3N-3423-2 Transformer D658587

 PartNumber: D658587-D.3N-3423-2   |   Asin: B07MPD7CSK

DAYKIN D.3N-3423-2 TRANSFORMER D658587

Features

Brand: Daykin   |   Manufacturer: DAYKIN

Item Dimensions: 5 x 7 x 8.5 inches (12.7 x 17.8 x 21.6 cm)   |   Package Dimensions: 5 x 7 x 8.5 inches (12.7 x 17.8 x 21.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

INSTRUMENT TRANSFORMER 3P3-101 Current Transformer 100:5 2VA 600V-AC D657672

 PartNumber: D657672-3P3-101   |   Asin: B07MKZ5JCB

INSTRUMENT TRANSFORMER 3P3-101 CURRENT TRANSFORMER 100:5 2VA 600V-AC D657672

Features

Brand: Instrument Transformer   |   Manufacturer: INSTRUMENT TRANSFORMER

Item Dimensions: 2.25 x 3.5 x 7.25 inches (5.7 x 8.9 x 18.4 cm)   |   Package Dimensions: 2.25 x 3.5 x 7.25 inches (5.7 x 8.9 x 18.4 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

EATON 42-1003-4 Current Transformer 300:5 600V-AC D656551

 PartNumber: D656551-42-1003-4   |   Asin: B07MDD9WG3

EATON 42-1003-4 CURRENT TRANSFORMER 300:5 600V-AC D656551

Features

Brand: Eaton   |   Manufacturer: EATON

Item Dimensions: 4.5 x 4.75 x 5 inches (11.4 x 12.1 x 12.7 cm)   |   Package Dimensions: 4.5 x 4.75 x 5 inches (11.4 x 12.1 x 12.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

HAMMOND 159Y Filter Choke 600MH 750MA D660010

 PartNumber: D660010-159Y   |   Asin: B07MC957Q3

HAMMOND 159Y FILTER CHOKE 600MH 750MA D660010

Features

Brand: Hammond   |   Manufacturer: HAMMOND

Item Dimensions: 2.5 x 2.5 x 4 inches (6.4 x 6.4 x 10.2 cm)   |   Package Dimensions: 2.5 x 2.5 x 4 inches (6.4 x 6.4 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

LED Voltmeter Ammeter, 2 in 1 Multimeter 0-100V/50A Voltage Current Measurement Meter Volts Amp Monitor Panel

 Ean: 4894710563179   |    PartNumber: PXTY1704FBA56   |   Asin: B07M9B54D1

Technical Parameters Supply voltage: 4.5-30V (wide range) Test voltage: 0-100V Minimum resolution: 0.1V Test current range: 0-10A Working current: Display mode: 0.28" LED, two-color (red and blue) Dimensions: 48 29 21 mm Mounting opening: 45.5 26.5 mm Measurement rate: 500mS/time Measurement accuracy: 1% ( 1 word) Extreme working conditions: Minimum operating voltage: +4.5V Maximum working voltage: +30V Working temperature: -10 ~ +65 Working humidity: 10~80% (no condensation) Working pressure: 80 ~ 106kPa Wiring method: Fine black line: the power supply area of the meter Thin red line: The power supply of the meter is positive (Note, the voltage between the fine red and black lines cannot exceed 30V) Thick black line: test common Thick red line: measuring positive voltage input Thick green or thick white line: current input end, because the meter head adopts common ground design, that is, the ground wire of the measuring end is connected with the grounding wire of the power supply end, so it can only be connected to the back end of the device under test (Such as when using a voltmeter alone. It is recommended to connect the green line and the black line to prevent the external meter from causing the current meter to flash) Note: Please strictly install the wiring diagram wiring. The current measured by this meter must be connected in series to the negative line of the circuit, otherwise the IC will be burned out.

Features

  • This program has a 12 month warranty and 100% friendly customer service.
  • This test voltage is 0-100V, and additional power supply is required. The power supply voltage range is DC4.5-30V, and the reverse connection will not burn.
  • High precision for accurate measurement of voltage and current values.
  • The maximum supply voltage should not exceed 30V, otherwise it will burn out and cannot be repaired.
  • This watch is equipped with 5 wires, 2 power supplies, 3 measurements, easy to connect to the car / battery car / motorcycle car line, used to monitor the battery voltage, timely grasp the battery voltage status, can also be used for other product voltage, current measurement use.
  • See more on Amazon...

Brand: MUSEROY   |   Manufacturer: MUSEROY

Item Dimensions: 0.33 x 0.45 x 0.74 inches (0.8 x 1.1 x 1.9 cm)   |   Package Dimensions: 0.7 x 3 x 4.5 inches (1.8 x 7.6 x 11.4 cm)

Amazon Price: $7.17 | as of 01/17/2019(12:49pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $7.17

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

LED Voltmeter Ammeter, Digital Multimeter 0-100V/50A Voltage Current Measurement Meter Volts Amp Monitor Panel

 Ean: 4894713035277   |    PartNumber: PXTY1704FBA34   |   Asin: B07M99ZCKW

Technical Parameters Supply voltage: 4.5-30V (wide range) Test voltage: 0-100V Minimum resolution: 0.1V Test current range: 0-10A Working current: Display mode: 0.28" LED, two-color (red and blue) Dimensions: 48 29 21 mm Mounting opening: 45.5 26.5 mm Measurement rate: 500mS/time Measurement accuracy: 1% ( 1 word) Extreme working conditions: Minimum operating voltage: +4.5V Maximum working voltage: +30V Working temperature: -10 ~ +65 Working humidity: 10~80% (no condensation) Working pressure: 80 ~ 106kPa Wiring method: Fine black line: the power supply area of the meter Thin red line: The power supply of the meter is positive (Note, the voltage between the fine red and black lines cannot exceed 30V) Thick black line: test common Thick red line: measuring positive voltage input Thick green or thick white line: current input end, because the meter head adopts common ground design, that is, the ground wire of the measuring end is connected with the grounding wire of the power supply end, so it can only be connected to the back end of the device under test (Such as when using a voltmeter alone. It is recommended to connect the green line and the black line to prevent the external meter from causing the current meter to flash) Note: Please strictly install the wiring diagram wiring. The current measured by this meter must be connected in series to the negative line of the circuit, otherwise the IC will be burned out.

Features

  • This watch is equipped with 5 wires, 2 power supplies, 3 measurements, easy to connect to the car / battery car / motorcycle car line, used to monitor the battery voltage, timely grasp the battery voltage status, can also be used for other product voltage, current measurement use.
  • Measure the current, please select according to the actual use range, it must be used within the range, otherwise it will be damaged.
  • The two-color dual-table is small in size and can display voltage and current on the same screen at the same time.
  • This program has a 12 month warranty and 100% friendly customer service.
  • This test voltage is 0-100V, and additional power supply is required. The power supply voltage range is DC4.5-30V, and the reverse connection will not burn.
  • See more on Amazon...

Brand: Mixpring   |   Manufacturer: Mixpring

Item Dimensions: 0.33 x 0.45 x 0.74 inches (0.8 x 1.1 x 1.9 cm)   |   Package Dimensions: 0.7 x 3 x 4.5 inches (1.8 x 7.6 x 11.4 cm)

Amazon Price: $6.97 | as of 01/17/2019(12:49pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $6.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

LED Voltmeter Ammeter, Digital Multimeter 0-100V/50A Voltage Current Measurement Meter Volts Amp Monitor Panel Sensor

 PartNumber: VZPXTY1704THH   |   Asin: B07M8XYFQ4

Wiring method: Fine black line: the power supply area of the meter Thin red line: The power supply of the meter is positive (Note, the voltage between the fine red and black lines cannot exceed 30V) Thick black line: test common Thick red line: measuring positive voltage input Thick green or thick white line: current input end, because the meter head adopts common ground design, that is, the ground wire of the measuring end is connected with the grounding wire of the power supply end, so it can only be connected to the back end of the device under test (Such as when using a voltmeter alone. It is recommended to connect the green line and the black line to prevent the external meter from causing the current meter to flash) Technical Parameters Supply voltage: 4.5-30V (wide range) Test voltage: 0-100V Minimum resolution: 0.1V Test current range: 0-10A Working current: 500mS/time Measurement accuracy: 1% Packing including: 1*LED Voltmeter Ammeter and OPP bag Extreme working conditions: Minimum operating voltage: +4.5V Maximum working voltage: +30V Working temperature: -10 ~ +65 Working humidity: 10~80% (no condensation) Working pressure: 80 ~ 106kPa Note: Please strictly install the wiring diagram wiring. The current measured by this meter must be connected in series to the negative line of the circuit, otherwise the IC will be burned out.

Features

  • This test voltage is 0-100V, and additional power supply is required. The power supply voltage range is DC4.5-30V, and the reverse connection will not burn.
  • High precision for accurate measurement of voltage and current values.
  • The maximum supply voltage should not exceed 30V, otherwise it will burn out and cannot be repaired.
  • This program has a 12 month warranty and 100% friendly customer service.
  • The two-color dual-table is small in size and can display voltage and current on the same screen at the same time.
  • See more on Amazon...

Brand: ZSTVIVA   |   Manufacturer: ZSTVIVA

Item Dimensions: 0.33 x 0.45 x 0.74 inches (0.8 x 1.1 x 1.9 cm)   |   Package Dimensions: 0.7 x 3 x 4.5 inches (1.8 x 7.6 x 11.4 cm)

Amazon Price: $3.99 | as of 01/17/2019(12:49pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $3.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

LED Voltmeter Ammeter, 2 in 1 Multimeter 0-100V/50A Voltage Current Measurement Meter Volts Amp Transformer

 PartNumber: UBYPPXTY1704   |   Asin: B07M8W4XS1

Technical Parameters Supply voltage: 4.5-30V (wide range) Test voltage: 0-100V Minimum resolution: 0.1V Test current range: 0-10A Working current: 500mS/time Measurement accuracy: 1% Note: Please strictly install the wiring diagram wiring. The current measured by this meter must be connected in series to the negative line of the circuit, otherwise the IC will be burned out. Extreme working conditions: Minimum operating voltage: +4.5V Maximum working voltage: +30V Working temperature: -10 ~ +65 Working humidity: 10~80% (no condensation) Working pressure: 80 ~ 106kPa Packing including: 1*LED Voltmeter Ammeter and OPP bag Wiring method: Fine black line: the power supply area of the meter Thin red line: The power supply of the meter is positive (Note, the voltage between the fine red and black lines cannot exceed 30V) Thick black line: test common Thick red line: measuring positive voltage input Thick green or thick white line: current input end, because the meter head adopts common ground design, that is, the ground wire of the measuring end is connected with the grounding wire of the power supply end, so it can only be connected to the back end of the device under test (Such as when using a voltmeter alone. It is recommended to connect the green line and the black line to prevent the external meter from causing the current meter to flash)

Features

  • High precision for accurate measurement of voltage and current values.
  • This test voltage is 0-100V, and additional power supply is required. The power supply voltage range is DC4.5-30V, and the reverse connection will not burn.
  • This watch is equipped with 5 wires, 2 power supplies, 3 measurements, easy to connect to the car / battery car / motorcycle car line, used to monitor the battery voltage, timely grasp the battery voltage status, can also be used for other product voltage, current measurement use.
  • The maximum supply voltage should not exceed 30V, otherwise it will burn out and cannot be repaired.
  • This program has a 12 month warranty and 100% friendly customer service.
  • See more on Amazon...

Brand: SUPWALL   |   Manufacturer: SUPWALL

Item Dimensions: 0.33 x 0.45 x 0.74 inches (0.8 x 1.1 x 1.9 cm)   |   Package Dimensions: 0.7 x 3 x 4.5 inches (1.8 x 7.6 x 11.4 cm)

Amazon Price: $3.99 | as of 01/17/2019(12:49pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $3.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

LED Voltmeter Ammeter, High Precision Multimeter 0-100V/50A Voltage Current Measurement Meter Volts Amp Monitor Panel

 Ean: 4894710607279   |    PartNumber: LY-PXTY1704-US   |   Asin: B07M8LKRTD

Note: Please strictly install the wiring diagram wiring. The current measured by this meter must be connected in series to the negative line of the circuit, otherwise the IC will be burned out. Technical Parameters Supply voltage: 4.5-30V (wide range) Test voltage: 0-100V Minimum resolution: 0.1V Test current range: 0-10A Working current: 500mS/time Measurement accuracy: 1% Extreme working conditions: Minimum operating voltage: +4.5V Maximum working voltage: +30V Working temperature: -10 ~ +65 Working humidity: 10~80% (no condensation) Working pressure: 80 ~ 106kPa Packing including: 1*LED Voltmeter Ammeter and OPP bag Wiring method: Fine black line: the power supply area of the meter Thin red line: The power supply of the meter is positive (Note, the voltage between the fine red and black lines cannot exceed 30V) Thick black line: test common Thick red line: measuring positive voltage input Thick green or thick white line: current input end, because the meter head adopts common ground design, that is, the ground wire of the measuring end is connected with the grounding wire of the power supply end, so it can only be connected to the back end of the device under test (Such as when using a voltmeter alone. It is recommended to connect the green line and the black line to prevent the external meter from causing the current meter to flash)

Features

  • The maximum supply voltage should not exceed 30V, otherwise it will burn out and cannot be repaired.
  • High precision for accurate measurement of voltage and current values.
  • This watch is equipped with 5 wires, 2 power supplies, 3 measurements, easy to connect to the car / battery car / motorcycle car line, used to monitor the battery voltage, timely grasp the battery voltage status, can also be used for other product voltage, current measurement use.
  • This test voltage is 0-100V, and additional power supply is required. The power supply voltage range is DC4.5-30V, and the reverse connection will not burn.
  • The two-color dual-table is small in size and can display voltage and current on the same screen at the same time.
  • See more on Amazon...

Brand: Lykke..   |   Manufacturer: Lykke..

Item Dimensions: 0.33 x 0.45 x 0.74 inches (0.8 x 1.1 x 1.9 cm)   |   Package Dimensions: 0.7 x 3 x 4.5 inches (1.8 x 7.6 x 11.4 cm)

Amazon Price: $5.99 | as of 01/17/2019(12:49pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. NK TECHNOLOGIES AT0-420-24L-FF Current TRANSDUCER 40V-DC 4-20MA D630896
  2. CR Magnetics CR4110-100 True RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, >= 2K ...
  3. Veris,Current Xducer,SplitCor,0-120A,4-20mA, H921
  4. CR Magnetics CR4480-15 Average RMS AC Current Transducer with 3 Element, 20 Hz - 4 KHz, 0 - 300 Out...
  5. ACI A/CTA-50 : Current Transducer 4-20mA Output
  6. Amprobe DM-CT-100 Current Transducer
  7. CR Magnetics CR4111-100 True RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, >= 2K ...
  8. CR Magnetics CR5210-100 DC Current Transducer with Single Element, DC, >=2K Output Load, 24 VDC ...

Most Wished For

  1. NK TECHNOLOGIES AT0-420-24L-FF Current TRANSDUCER 40V-DC 4-20MA D630896
  2. CR Magnetics CR4110-100 True RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, >= 2K ...
  3. Veris,Current Xducer,SplitCor,0-120A,4-20mA, H921
  4. CR Magnetics CR4480-15 Average RMS AC Current Transducer with 3 Element, 20 Hz - 4 KHz, 0 - 300 Out...
  5. ACI A/CTA-50 : Current Transducer 4-20mA Output
  6. Amprobe DM-CT-100 Current Transducer
  7. CR Magnetics CR4111-100 True RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, >= 2K ...
  8. CR Magnetics CR5210-100 DC Current Transducer with Single Element, DC, >=2K Output Load, 24 VDC ...

Most Gifted

  1. NK TECHNOLOGIES AT0-420-24L-FF Current TRANSDUCER 40V-DC 4-20MA D630896
  2. CR Magnetics CR4110-100 True RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, >= 2K ...
  3. Veris,Current Xducer,SplitCor,0-120A,4-20mA, H921
  4. CR Magnetics CR4480-15 Average RMS AC Current Transducer with 3 Element, 20 Hz - 4 KHz, 0 - 300 Out...
  5. ACI A/CTA-50 : Current Transducer 4-20mA Output
  6. Amprobe DM-CT-100 Current Transducer
  7. CR Magnetics CR4111-100 True RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, >= 2K ...
  8. CR Magnetics CR5210-100 DC Current Transducer with Single Element, DC, >=2K Output Load, 24 VDC ...

Top Selling

  1. NK TECHNOLOGIES AT0-420-24L-FF Current TRANSDUCER 40V-DC 4-20MA D630896
  2. CR Magnetics CR4110-100 True RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, >= 2K ...
  3. Veris,Current Xducer,SplitCor,0-120A,4-20mA, H921
  4. CR Magnetics CR4480-15 Average RMS AC Current Transducer with 3 Element, 20 Hz - 4 KHz, 0 - 300 Out...
  5. ACI A/CTA-50 : Current Transducer 4-20mA Output
  6. Amprobe DM-CT-100 Current Transducer
  7. CR Magnetics CR4111-100 True RMS AC Current Transducer with Single Element, 20 Hz - 4 KHz, >= 2K ...
  8. CR Magnetics CR5210-100 DC Current Transducer with Single Element, DC, >=2K Output Load, 24 VDC ...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.