Frontpage > Industrial > Industrial Electrical > Frequency Transducers

Best Frequency Transducers - Buying Guide

Last Updated: 08/19/2019

Share on

Bestselling Frequency Transducers on Amazon

  1. AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth Mixing Down Mixing Dual Balanced Mi...
  2. Akzon AD831 500MHz Active Mixer Module Bandwidth High Linearity Low Distortion Active RF Mixer Module
  3. Frequency Synthesizer - 35M-4.4GHz RF Signal Source Phase Locking Loop Frequency Synthesizer ADF4351...
  4. Radio Frequency RF Mixer Microwave Double Balanced RFin=1.5-4.5GHz RFout=DC-1.5GHz LO=312
  5. Passive Double-Balanced Mixer, HMC213 RF Passive Mixer Diode Frequency Conversion Module
  6. High Frequency RF Mixer Frequency Converter AD831 RF Input 0.1-500MHz
  7. Lowrance 000-11300-001 SonarHub Module with Transom Chirp Transducer
  8. 10K Potentiometer Frequency Converter VSD VFD For Variable Speed Drive Inverter - Arduino Compatible...
  9. 1PC RF Envelope Detector Amplitude Detection
  10. 1pc AD831 High Frequency RF/Mixer/Frequency Converter

  #1

AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth Mixing Down Mixing Dual Balanced Mixer Single Chip Radio Frequency Converter

 Ean: 0663862600865   |    PartNumber: 9687283011   |   Asin: B078N2M9ZJ

The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base station, DC-baseband conversion, quadrature modulation and demodulation, and ultrasound imaging, frequency shift detection and other applications. The AD831 has provide +24 dBm third-order intermodulation intercept point, realization of -10 dBm LO power, without the need for a high power LO drive. There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost. The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use. The operating frequency of the RF and LO inputs can be as high as 500MHz. IF output is single ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain. The amplifier has low DC offset characteristics, so it can be used in DC-baseband frequency conversion and quadrature amplitude demodulation. When the mixer's output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3dB at 70MHz. Different from the passive mixer, there is no insertion loss, no need external duplex device, and no need passive termination for AD831. Specifications: RF Input: 0.1-500MHz RF Input: +10dBm (1dB compression point) Local Oscillator Input: 0.1-500MHz Local Oscillator Input: -10dBm IF Output: 0.1-200MHz Power Supply Voltage: 9--11V single ended power supply Size: 33*33mm/1.3*1.3in Package Includes: 1 x Frequency Mixer

Features

  • The AD831 is a low distortion, wide dynamic range, single chip mixer, suitable for HF and VHF Receiver RF-IF frequency, second mixer in DMR base station, DC-baseband conversion, quadrature modulation and demodulation, and ultrasound imaging, frequency shift detection and other applications
  • The AD831 has provide +24 dBm third-order intermodulation intercept point, realization of -10 dBm LO power, without the need for a high power LO drive
  • There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost
  • The mixer is designed as a single power supply, RF, IF and LO ports with DC isolation capacitor, easy to use
  • The amplifier has low DC offset characteristics, so it can be used in DC-baseband frequency conversion and quadrature amplitude demodulation
  • See more on Amazon...

Brand: Walfront   |   Manufacturer: Walfront

Package Dimensions: 0.16 x 3.03 x 4.65 inches (0.4 x 7.7 x 11.8 cm)

Amazon Price: $15.99 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Akzon AD831 500MHz Active Mixer Module Bandwidth High Linearity Low Distortion Active RF Mixer Module

 Ean: 0757686513897   |    PartNumber: Akozonnd4ai5r0xu   |   Asin: B07JQD3HD6

Features:

The operating frequency of the RF and LO inputs can be as high as 500MHz. IF output is single ended voltage output. With 250 MHz output bandwidth. A single resistor connected between pins OUT and FB is used to set the gain. The amplifier has low DC offset characteristics, so it can be used in DC-baseband frequency conversion and quadrature amplitude demodulation. When the mixer's output amplifier and the optimum source impedance, the SSB noise figure of the mixer is 10.3dB at 70MHz. Different from the passive mixer, there is no insertion loss, no need external duplex device, and no need passive termination for AD831.

Specifications:

Model: AD831

RF Input: 0.1-500MHz

RF Input: +10dBm (1dB compression point)

Local Oscillator Input: 0.1-500MHz

Local Oscillator Input: -10dBm

IF Output: 0.1-200MHz

Power Supply Voltage: 5V Dual power supply

Size: Approx. 7*5.3cm/2.8*2.1inch

Weight: Approx. 12g / 0.4oz



Package List:

1 x Active Mixer Module

Features

  • The AD831 has provide +24 dBm third-order intermodulation intercept point, realization of -10 dBm LO power, without the need for a high power LO drive
  • There is no corresponding shielding and isolation problems, therefore, compared with the passive mixer to improve the performance of the system, reduce the system cost
  • The mixer is designed as a single power supply, RF, IF and LO port with DC isolation capacitor, easy to use
  • The operating frequency of the RF and LO inputs can be as high as 500MHz
  • IF output is single ended voltage output
  • See more on Amazon...

Brand: Akozon   |   Manufacturer: Akozon

Item Dimensions: 2.36 x 2.76 x 3.15 inches (6.0 x 7.0 x 8.0 cm)   |   Package Dimensions: 0.79 x 2.76 x 3.54 inches (2.0 x 7.0 x 9.0 cm)

Amazon Price: $11.39 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $11.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Frequency Synthesizer - 35M-4.4GHz RF Signal Source Phase Locking Loop Frequency Synthesizer ADF4351 Development Board RF Signal Source Frequency Synthesizer

 Ean: 0723645680726   |    PartNumber: ES712-21   |   Asin: B07V4SKL9K

Features: 1.ADF4351 Signal Source Development Board - Has well designed circuit board layout. 2.Frequency Synthesizer - Can be controlled by the upper computer official software. 3.RF Signal Source Frequency Synthesizer - All control pins are leaded out for convenient operation. 4.Frequency Synthesizer Development Board - Default + -50ppm 25M active crystal oscillator. 5.Phase-locked loop Board - Three-wire serial peripheral interface bus lead to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping. Specifications: Output frequency range: 35MHz - 4.4GHz Supply voltage: 4-9V (5VDC) Output signal: 2.2GHZ--4.4GHz sine wave (fundamental) 35MHZ--2.2GHz squarewave (fundamental division) Output signal: output speed, signal strength: + 5dBm (programmable) RF connector: SMA female head Control Interface: Three-wire Serial Peripheral Interface Bus Reference Clock: 10.000MHZ (default), through the interface to an external SMA Size: Approx. 4.8 x 4.9cm / 1.89 x 1.93inch Weight:15g Connection: The module can pin microcontroller LCD1602 / LCD12864 module connection (can be plugged directly Backward), convenient software debugging, both lock indicator (Lock). Pin correspond to the following: 1.GND ------------------------- GND 2.VDD (5V) ------------------- VCC 3.VO -------------------------- NC (empty) 4.RS -------------------------- NC (empty) 5.R / W ------------------------- MUXOUT 6.EN -------------------------- CLK 7.DB0 ------------------------- DATA 8.DB1 ------------------------- LE 9.DB2 ------------------------- CE (has 10K pullup) 10.DB3 ------------------------- GND (do not take) Reference Clock: 10.000MHZ default reference clock signal is active clock or an external reference clock signal, you need to modify the three-way connection with a soldering iron, connect EXT_REF

Features

  • ADF4351 Signal Source Development Board - Has well designed circuit board layout.
  • Frequency Synthesizer - Can be controlled by the upper computer official software.
  • RF Signal Source Frequency Synthesizer - All control pins are leaded out for convenient operation.
  • Frequency Synthesizer Development Board - Default + -50ppm 25M active crystal oscillator.
  • Phase-locked loop Board - Three-wire serial peripheral interface bus lead to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping.
  • See more on Amazon...

Brand: Nikou   |   Manufacturer: Nikou

Package Dimensions: 0.79 x 1.97 x 2.76 inches (2.0 x 5.0 x 7.0 cm)

Amazon Price: $22.01 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $22.01

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Radio Frequency RF Mixer Microwave Double Balanced RFin=1.5-4.5GHz RFout=DC-1.5GHz LO=312

 Ean: 0792172697354   |    PartNumber: Zeronewtk1568gab   |   Asin: B07FSWVSRX

Specifications:

RFin=1.5--4.5GHz

RFout=DC--1.5GHz

LO=312

Noise Factor: 0.6dB

LO/RF Isolation: 40dB

Frequency Conversion Loss: 8.5dB

1dB Compression Point: 10dbm

RF/IF Max. Input Power: 13DBM

LO Max. Input Power: 27DBM

Connector: Standard SMA-female

Package Includes: 1 Frequency Mixer

Features

  • SPECIFICATION---This is a double-balanced radio frequency mixer of RFin=1.5--4.5GHz, RFout=DC--1.5GHz, LO=312
  • BOTH INPUTS---It has both its inputs applied to differential circuits, so that neither of the input signals and only the product signal appears at the output
  • COMPLEX---Double balanced mixers are more complex and require higher drive levels than unbalanced and single balanced designs
  • GOOD ISOLATION---This mixer has good isolation at RF and IF ends relative to LO end, so it does not demand more about IF filter
  • SUITABLE MOST DEVICES---Standard SMA female connectors are suitable for connecting most devices
  • See more on Amazon...

Brand: Zerone   |   Manufacturer: Zerone

Amazon Price: $6.59 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $6.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Passive Double-Balanced Mixer, HMC213 RF Passive Mixer Diode Frequency Conversion Module

 Ean: 0747333974171   |    PartNumber: Hilitandn5gipfhmu6   |   Asin: B07Q37N7MH

Features:
Passive double-balanced mixer, 8-pin surface-mount plastic package (MsOP).
Passive mixers use GaAs Schottky diodes and novel planar transformer on-chip balun structures. It can be used as up-converter, down-converter, two-phase modulator and demodulator or phase comparator. The mixer has the advantage of high isolation The passive mixers adopt mini components design,compact and light weight Passive Mixer has low conversion loss of 8.5dB


Specification:
Shell material: CNC aluminum alloy
Model: HMC213 module
Conversion loss: 8.5db
LO to RF isolation: 40dB
LO to IF isolation: 35dB
Frequency range, RF and LO: 1.5-4.5G
Frequency range, IF: DC-1.5G
1dB gain compression (input) : 8dBm
IP3 (input) : 18dBm
Weight: Approx.46g/1.7oz

Package list:
1 x Passive Mixer




Features

  • HIGH QUALITY - Made of high quality Cnc aluminum alloy casing, sturdy and durable to use
  • EASY TO USE - Passive mixers use GaAs Schottky diodes and novel planar transformer on-chip balun structures.
  • PASSIVE DOUBLE-Balanced Mixer - It can be used as up-converter, down-converter, two-phase modulator and demodulator or phase comparator.
  • LOW CONVERSION LOSS - Passive Mixer has low conversion loss of 8.5dB
  • LIGHT WEIGHT - The passive mixers adopt mini components design,compact and light weight
  • See more on Amazon...

Brand: Hilitand   |   Manufacturer: Hilitand

Item Dimensions: 0.47 x 2.17 x 2.76 inches (1.2 x 5.5 x 7.0 cm)   |   

Amazon Price: $19.99 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $20.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

High Frequency RF Mixer Frequency Converter AD831 RF Input 0.1-500MHz

 Ean: 0724942389459   |    PartNumber: Walfrontztngy0fp4b   |   Asin: B07PFHMTCM

Description:

There is no need for a high-power LO driver, the corresponding shielding and isolation issues, which improves performance over passive mixers System performance, and reduce system cost.


Specification:

RF input: 0.1-500MHz

RF input: + 10dBm (1dB compression point)

Local oscillator input: 0.1-500Mhz

Local oscillator input: -10dbm

IF output: 0.1-200mhz

Power supply voltage: 9-11v single-terminal power supply

Weight: Approx.10g/0.4oz



Package list:

1 Frequency Converter

Features

  • Easy to use: The mixer is designed for single-supply operation, RF, IF and LO port with DC isolation capacitors, easy to use.
  • Single-ended voltage output.: RF and LO inputs operate up to 500MHz. The IF output is a single-ended voltage output. With 250 MHz output bandwidth.
  • Single resistor: A single resistor connected between pins OUT and FB is used to set the gain.
  • Low DC offset characteristics: The low DC offset characteristics can be used for DC - baseband frequency conversion and quadrature amplitude demodulation and other DC-coupled applications.
  • Operation advantages: The mixer's output amplifier and the best source impedance, the mixer SSB noise figure at 70 MHz 10.3 dB. The AD831 does not have insertion loss, eliminates the need for an external duplexer, and requires no passive termination.
  • See more on Amazon...

Brand: Wal front   |   Manufacturer: Wal front

Item Dimensions: 0.39 x 0.39 x 0.39 inches (1.0 x 1.0 x 1.0 cm)   |   

Amazon Price: $14.09 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $14.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Lowrance 000-11300-001 SonarHub Module with Transom Chirp Transducer

Model: 000-11300-001   |    Mpn: 000-11300-001   |    Ean: 9420024128411   |    PartNumber: 000-11300-001   |   Asin: B00HJZMYR6

Lawrence Sonar Hub Module w/Transom CHIRP Transducer. The compact Sonar Hub sounder module provides an all-in-one solution for adding best-in-class Structure Scan HD and CHIRP sonar capabilities to compatible Lawrence HDS series multifunction displays. The new Sonar Hub Sounder Module makes it easier than ever to identify productive fishing areas with connectivity to the latest sonar technologies for Lawrence HDS displays, including CHIRP and Structure Scan HD imaging, as well as the new Lawrence Spotlight Scan bow-mounted solution for HDS Gen2 models. Compact all-in-one sonar module delivers Structure Scan HD and CHIRP sonar technologies. CHIRP sonar with AIRMAR TM 150 transducer delivers extremely efficient pulse generation that provides improved target resolution and noise rejection, as well as wide coverage for perfect arches that clearly identify fish targets. Structure Scan HD offers best-in-class, side-scanning range and resolution, plus Down Scan Imaging to provide crystal-clear, picture-like views of what's beneath a boat. Optional transducers include AIRMAR TM 150, single-channel CHIRP transducer and existing Structure Scan HD transducers. Compatible with Spotlight Scan forward- and surround-scanning sonar transducers. (Sonar Hub not required for Spotlight Scan functionality with HDS Gen2 Touch displays). Plug-and-play compatibility with Lawrence HDS Gen1 (not including Spotlight Scan and CHIRP sonar), HDS Gen2 and Gen2 Touch fish finder/chart plotter models. Three built-in Ethernet ports allow for quick and convenient networking without the need for an extra Ethernet networking module. Supported by Lawrence Advantage Service program. Warranty: Two years parts and labor. Dimensions: 7.1"W x 8"H x 2"D; Wt.: 2 lb. In the box: Sonar Hub Sounder module, CHIRP transom mount transducer, power cable, 6' Ethernet cable, owner's manual.

Features

  • Black box sounder for HDS units
  • Broadband CHIRP Fish finder
  • Structure Scan Fish finder
  • Includes transom mount CHIRP transducer
  • See more on Amazon...

Brand: Lowrance   |   Manufacturer: Lowrance

Item Dimensions: 9 x 4 x 13 inches (22.9 x 10.2 x 33.0 cm)   |   Package Dimensions: 10.3 x 11.9 x 13.9 inches (26.2 x 30.2 x 35.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

10K Potentiometer Frequency Converter VSD VFD For Variable Speed Drive Inverter - Arduino Compatible SCM & DIY Kits Arduino Compatible SCM Components - 1 x Pressure Sensor

 Ean: 7599699397995   |    PartNumber: 7599699397995   |   Asin: B07GF9WBN5

10K Potentiometer Frequency Converter VSD VFD For Variable Speed Drive Inverter - Arduino Compatible SCM & DIY Kits Arduino Compatible SCM Components - , , 1 x Pressure Sensor, 1 x HX711 Weighing Sens
Feature: Material: Carbon film
Size: 22mm
Resistance adjustment: Rotary
Resistance change mode: D type (index type)
Nominal resistance: 10K
Rated power: 2 (W)
Tolerance tolerance: 0.5 (%)
Slip noise: 0 (V)
Resolution: 0 (%)
Zero resistance: 0 ( )
Contact resistance: 20 ( )
Insulation resistance: 100 (M )
Features: Screw type terminals no soldering required
Application: Variable speed drive invert
Package includes:
1 x 10k potentiometer 22mm panel mount VSD VFD

Features

  • Arduino Compatible SCM & DIY Kits Arduino Compatible SCM Components - Feature: Material: Carbon film
  • Size: 22mm
  • Resistance adjustment: Rotary
  • Resistance change mode: D type (index type)
  • 10K Potentiometer Frequency Converter VSD VFD For Variable Speed Drive Inverter - Arduino Compatible SCM & DIY Kits Arduino Compatible SCM Components - 1 x Pressure Sensor
  • See more on Amazon...

Brand: Unknown   |   Manufacturer: Unknown

Amazon Price: $18.92 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $18.92

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

1PC RF Envelope Detector Amplitude Detection

 Ean: 0193875721313   |    PartNumber: MiUS1224.479   |   Asin: B07MNG6K18

Features:
The product uses double voltage detector (composed of two reverse microwave diodes), single-tube detector sensitivity than doubled (6dB), with high sensitivity (typical -30dBm, or even to -40dBm) , Not the ordinary 2AP9, 1N60 can shoulder to shoulder.

Specifications:
Maximum input: 20dBm
Detection output: the default is positive (such as the need for negative output can contact the store)
Operating frequency: 0.1 - 3200MHz
RC filter: R = 10K, C = 1nF; (output port of the two parallel components)
Color: green
Size: 15*23MM
Material: Electronic component

Package Included:
1 x RF Envelope Detector

Notes:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.

Features

  • The product uses double voltage detector (composed of two reverse microwave diodes), single-tube detector sensitivity than doubled (6dB), with high sensitivity (typical -30dBm, or even to -40dBm) , Not the ordinary 2AP9, 1N60 can shoulder to shoulder.
  • 0.00
  • See more on Amazon...

Brand: Milabelle   |   Manufacturer: Milabelle

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

1pc AD831 High Frequency RF/Mixer/Frequency Converter

 Ean: 0193878336781   |    PartNumber: PrUS1213.318   |   Asin: B07LBKLS8X

Features:
The AD831 is a low distortion, wide dynamic range, single-chip mixer suitable for RF-IF downconversion in HF and VHF receivers, second mixer in DMR base stations, DC-baseband conversion, quadrature modulation And demodulation as well as Doppler shift detection in ultrasound imaging applications.
The AD831 provides a +24 dBm third-order intercept point for -10 dBm LO power consumption without the need for a high-power LO driver and without the corresponding shielding and isolation issues, resulting in improved performance over passive mixers System performance, reduce system cost.
The mixer is designed for single-supply operation, RF, IF and LO ports with DC isolation capacitors, easy to use.
RF and LO inputs operate up to 500MHz.
The IF output is a single-ended voltage output.
With 250 MHz output bandwidth.
A single resistor connected between pins OUT and FB is used to set the gain.
The amplifier has low DC offset characteristics, which can be used for DC - baseband frequency conversion and quadrature amplitude demodulation and other DC-coupled applications.
The mixer's output amplifier and the best source impedance, the mixer SSB noise figure at 70 MHz 10.3 dB. Unlike passive mixers, the AD831 does not have insertion loss, eliminates the need for an external duplexer, and requires no passive termination.

Specifications:
RF input: 0.1-500MHz
RF input: + 10dBm (1dB compression point)
Local oscillator input: 0.1-500MHz
Local oscillator input: -10dBm
IF output: 0.1-200MHz
Supply voltage: 9 - 11V single-ended power supply
Color: green
Size: 20*30MM
Material: Electronic component

Package Included:
1 x Frequency Converter

Notes:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.

Features

  • The AD831 is a low distortion, wide dynamic range, single-chip mixer suitable for RF-IF downconversion in HF and VHF receivers, second mixer in DMR base stations, DC-baseband conversion, quadrature modulation And demodulation as well as Doppler shift detection in ultrasound imaging applications.
  • The AD831 provides a +24 dBm third-order intercept point for -10 dBm LO power consumption without the need for a high-power LO driver and without the corresponding shielding and isolation issues, resulting in improved performance over passive mixers System performance, reduce system cost.
  • The mixer is designed for single-supply operation, RF, IF and LO ports with DC isolation capacitors, easy to use.
  • RF and LO inputs operate up to 500MHz.
  • The IF output is a single-ended voltage output.
  • See more on Amazon...

Brand: PromitIonA   |   Manufacturer: PromitionA

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Frequency Synthesizer, 35M-4.4GHz Signal Source Phase Locking Loop Frequency Synthesizer ADF4351 Development Board

 Ean: 0717444743126   |    PartNumber: Zyyiniki2v7m6td9   |   Asin: B07W99916B

Specifications:
Output frequency range: 35MHz - 4.4GHz
Supply voltage: 4-9V (5VDC)
Output signal:
2.2GHZ--4.4GHz sine wave (fundamental)
35MHZ--2.2GHz squarewave (fundamental division)
Output signal: output rate, signal strength: + 5dBm (programmable)
connector: SMA female head
Control Interface: Three-wire Serial Peripheral Interface Bus
Reference Clock: 10.000MHZ (default), through the interface to an external SMA
Size: Approx. 4.8 x 4.9cm / 1.89 x 1.93inch
Weight:15g
Connection:
The module can pin microcontroller LCD1602 / LCD12864 module connection (can be plugged directly Backward), convenient software debugging, both lock indicator (Lock).
Pin correspond to the following:
1.GND ------------------------- GND
2.VDD (5V) ------------------- VCC
3.VO -------------------------- NC (empty)
4.RS -------------------------- NC (empty)
5.R / W ------------------------- MUXOUT
6.EN -------------------------- CLK
7.DB0 ------------------------- DATA
8.DB1 ------------------------- LE
9.DB2 ------------------------- CE (has 10K pullup)
10.DB3 ------------------------- GND (do not take)
Reference Clock:
10.000MHZ default reference clock signal is active clock or an external reference clock signal, you need to modify the three-way connection with a soldering iron, connect EXT_REF external reference signal.
Package included:
1 x ADF4351 Signal Source Frequency Synthesizer

Features

  • WELL DESIGNED CIRCUIT BOARD---This ADF4351 signal source development board has well designed circuit board layout
  • CONTROLLED BY--- This signal source frequency synthesizer can be controlled by the upper computer official software
  • MAIN FEATURE---Three-wire serial peripheral interface bus lead to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping
  • CONVENIENT OPERATION---All control pins are leaded out for convenient operation
  • DEFAULT---The signal source frequency synthesizer is of default + -50ppm 25M active crystal oscillator
  • See more on Amazon...

Brand: Zyyini   |   Manufacturer: Zyyini

Item Dimensions: 0.79 x 1.97 x 2.76 inches (2.0 x 5.0 x 7.0 cm)   |   

Amazon Price: $28.99 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $28.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

YWBL-WH Amplitude Detection Module,RF Envelope Detector Discharge Signal Detection Module

 Ean: 0743562254442   |    PartNumber: YWBL-WHdimrxwczat   |   Asin: B07V6H21LP

Specifications:
Maximum input: 20dBm(burning power)
Detection output: The default is positive
Working Frequency: 0.1-3200MHz
RC Filter: R = 10K, C = 1nF(two elements in parallel output ports)
Quantity: 1pcs
Size: Approx. 24 15mm / 0.94 0.59inch
Weight: 5g
Note: If you want to lower operating frequency, you can increase the capacitor of the output, if you want fast response, then need to reduce capacity, it is a contradiction that can be configured according to your needs.

The working principle:
This product uses a voltage doubler detector (consisting of two reverse microwave diodes), 1 time sensitive than single-tube detector(about 6dB),
high sensitivity (typical -30dBm, or even to -40dBm).

Package included:
1 RF Envelope Detector

Features

  • Specifications:Maximum input: 20dBm(burning power);Detection output: The default is positive;Working Frequency: 0.1-3200MHz;RC Filter: R = 10K, C = 1nF(two elements in parallel output ports).
  • This product uses a voltage doubler detector (consisting of two reverse microwave diodes), 1 time sensitive than single-tube detector(about 6dB),high sensitivity (typical -30dBm, or even to -40dBm).
  • Note: If you want to lower operating frequency, you can increase the capacitor of the output, if you want fast response, then need to reduce capacity, it is a contradiction that can be configured according to your needs.
  • Adopt a voltage doubler detector, more sensible.
  • 100% brand new and high quality.
  • See more on Amazon...

Brand: YWBL-WH   |   Manufacturer: YWBL-WH

Amazon Price: $5.49 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $10.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Power Adapter, 6V 700mA Wall Charger AC Adapter Battery Charger for Kids Ride On Car Toy 220V CN Plug, Scales, Routers, Speakers

 Ean: 0708223977375   |    PartNumber: Vikyez73b8o0ap4   |   Asin: B07TXJ5VDG

Features:
1. Smart charger will not over charge the battery.
2. Save your battery power while charging the battery.
3. This is an 6V AC adapter for kids car a replacement for the adapter that came with the car.
4. Made of high quality material, solid and safe to use.
5. Reusable and fast charger, can be used to charge 6 Volt kids ride on car.

Specification:
Condition: 100% Brand New
Item Type: Battery Charger
Input Voltage: 220V
Plug: CN Plug
Output: 6V 700mA
Application: Children's electric stroller accessories battery charger

Package List:
1 * Battery Charger

Note:
1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Features

  • Smart charger will not over charge the battery.
  • Save your battery power while charging the battery.
  • This is an 6V AC adapter for kids car a replacement for the adapter that came with the car.
  • Made of high quality material, solid and safe to use.
  • Reusable and fast charger, can be used to charge 6 Volt kids ride on car.
  • See more on Amazon...

Brand: Vikye   |   Manufacturer: Vikye

Item Dimensions: 1.97 x 1.97 x 3.15 inches (5.0 x 5.0 x 8.0 cm)   |   

Amazon Price: $6.99 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Frequency Synthesizer - RF Signal Source Frequency Synthesizer,35M-4.4GHz RF Signal Source Phase Locking Loop Frequency Synthesizer ADF4351 Development Board

 Ean: 0723645618644   |    PartNumber: ADF4351-PLLSS   |   Asin: B07TV474Y2

Features: This ADF4351 signal source development board has well designed circuit board layout. It can be controlled by the upper computer official software. All control pins are leaded out for convenient operation. Default + -50ppm 25M active crystal oscillator. Three-wire serial peripheral interface bus lead to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping. Specifications: Output frequency range: 35MHz - 4.4GHz Supply voltage: 4-9V (5VDC) Output signal: 2.2GHZ--4.4GHz sine wave (fundamental) 35MHZ--2.2GHz squarewave (fundamental division) Output signal: output speed, signal strength: + 5dBm (programmable) RF connector: SMA female head Control Interface: Three-wire Serial Peripheral Interface Bus Reference Clock: 10.000MHZ (default), through the interface to an external SMA Size: Approx. 4.8 x 4.9cm / 1.89 x 1.93inch Weight:15g Connection: The module can pin microcontroller LCD1602 / LCD12864 module connection (can be plugged directly Backward), convenient software debugging, both lock indicator (Lock). Pin correspond to the following: 1.GND ------------------------- GND 2.VDD (5V) ------------------- VCC 3.VO -------------------------- NC (empty) 4.RS -------------------------- NC (empty) 5.R / W ------------------------- MUXOUT 6.EN -------------------------- CLK 7.DB0 ------------------------- DATA 8.DB1 ------------------------- LE 9.DB2 ------------------------- CE (has 10K pullup) 10.DB3 ------------------------- GND (do not take) Reference Clock: 10.000MHZ default reference clock signal is active clock or an external reference clock signal, you need to modify the three-way connection with a soldering iron, connect EXT_REF external reference signal. RF output: For ease of use, the default is broadband output, the output of two differen

Features

  • This ADF4351 signal source development board has well designed circuit board layout.
  • It can be controlled by the upper computer official software.
  • All control pins are leaded out for convenient operation.
  • Default + -50ppm 25M active crystal oscillator.
  • Three-wire serial peripheral interface bus lead to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping.
  • See more on Amazon...

Brand: Vobor   |   Manufacturer: Vobor

Package Dimensions: 0.79 x 1.97 x 2.76 inches (2.0 x 5.0 x 7.0 cm)

Amazon Price: $23.59 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $23.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

V/C Converter Module,V0-5V/10V to 0-20MA Voltage to Current Switch Voltage to Current Board Signal Conversion Module Current and Constant Voltage

 Ean: 0708223460143   |    PartNumber: Thincol6nvts5frih   |   Asin: B07TJTTDCC

Specification: Condition: 100% Brand New

Module limit power supply is 5-25VDC

The maximum operating current of the module does not exceed 50MA

The internal resistance of the voltage input signal is 10K

The current input by the voltage signal must be at least 1MA or more.

The maximum input voltage signal cannot be greater than 11V

The maximum voltage signal input ripple cannot be greater than 500 MV VPP.

The voltage of the current input signal must be greater than 3V, which is less than the power supply voltage of the power module.

Current output capability 1MA-5MA.

The output voltage is DC, ripple novel 50MV.

Current output signal internal resistance is adjustable

Current COUT output is positive: 0-20MA current output positive terminal

Current output negative (GND): 0-20MA current output negative terminal

Power input positive (V+): 5-25VDC power input positive terminal

Power input negative (GND): 5-25VDC power input negative terminal

Voltage VIN input is positive: 0-5V or 0-10V voltage input positive terminal

Voltage input negative (GND): 0-5V or 0-10V voltage input negative terminal

An>): 0-20MA current input negative terminal

Weight: Approx. 19g / 0.7oz

Features

  • 100% brand new and high quality.
  • Small body and stable performance
  • Can switch voltage to current
  • Output signal can be directly connected to AD converter
  • Can be connected to a microcontroller with AD function.
  • See more on Amazon...

Brand: Thincol   |   Manufacturer: Thincol

Item Dimensions: 0.79 x 1.97 x 1.77 inches (2.0 x 5.0 x 4.5 cm)   |   

Amazon Price: $9.79 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $9.92

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Frequency Synthesizer - 35M-4.4GHz RF Signal Source Phase Locking Loop Frequency Synthesizer ADF4351 Development Board

 Ean: 0758449075126   |    PartNumber: plh2195-0614   |   Asin: B07T4NJXJP

Features: This ADF4351 signal source development board has well designed circuit board layout. It can be controlled by the upper computer official software. All control pins are leaded out for convenient operation. Default + -50ppm 25M active crystal oscillator. Three-wire serial peripheral interface bus lead to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping. Specifications: Output frequency range: 35MHz - 4.4GHz Supply voltage: 4-9V (5VDC) Output signal: 2.2GHZ--4.4GHz sine wave (fundamental) 35MHZ--2.2GHz squarewave (fundamental division) Output signal: output speed, signal strength: + 5dBm (programmable) RF connector: SMA female head Control Interface: Three-wire Serial Peripheral Interface Bus Reference Clock: 10.000MHZ (default), through the interface to an external SMA Size: Approx. 4.8 x 4.9cm / 1.89 x 1.93inch Weight:15g Connection: The module can pin microcontroller LCD1602 / LCD12864 module connection (can be plugged directly Backward), convenient software debugging, both lock indicator (Lock). Pin correspond to the following: 1.GND ------------------------- GND 2.VDD (5V) ------------------- VCC 3.VO -------------------------- NC (empty) 4.RS -------------------------- NC (empty) 5.R / W ------------------------- MUXOUT 6.EN -------------------------- CLK 7.DB0 ------------------------- DATA 8.DB1 ------------------------- LE 9.DB2 ------------------------- CE (has 10K pullup) 10.DB3 ------------------------- GND (do not take) Reference Clock: 10.000MHZ default reference clock signal is active clock or an external reference clock signal, you need to modify the three-way connection with a soldering iron, connect EXT_REF external reference signal. RF output: For ease of use, the default is broadband output, the output of two differential signa

Features

  • This ADF4351 signal source development board has well designed circuit board layout.
  • It can be controlled by the upper computer official software.
  • All control pins are leaded out for convenient operation.
  • Default + -50ppm 25M active crystal oscillator.
  • Three-wire serial peripheral interface bus lead to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping.
  • See more on Amazon...

Brand: Jadeshay   |   Manufacturer: Jadeshay

Package Dimensions: 0.79 x 1.97 x 2.76 inches (2.0 x 5.0 x 7.0 cm)

Amazon Price: $24.19 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $24.19

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Electric Putter,100mm/4inch Stroke Heavy Duty DC 12V Load Linear Actuator Electric Motor for Electric Sofa,Electric Stand Lift Rod,Camera Frame,etc

 Ean: 0712979482731   |    PartNumber: Focket1uh90iopgx   |   Asin: B07SS3HKMW

Features:

Electric putter, also known as push rod motor, electric cylinder and linear actuator. The electric putter is an electric drive that converts the motor's rotational motion into a straight reciprocating motion of the push rod. Can be used in a variety of simple or complex process as the implementation of mechanical use, in order to achieve long-range control, centralized control or automatic control. Main use: electric medical bed, electric sofa, electric stand lift rod, industrial electric lift system, camera frame, video machine, wedding system. How it works:After the motor is slowed by the gear, drive a pair of screw nuts. The motor rotation into a linear motion, the use of motor reversal to complete the putter action. Such as through a variety of lever, rocker or connecting rod and other institutions to complete the rotation, shake and other complex movements. Low noise design,noise level is 50dB.


Specifications:

Size: 20.5 x 4.0 x 7.5cm/8.1 x 3 x 1.6inch

Weight: 1070 g

Permanent magnet DC motor drive voltage: 12V DC

Maximum thrust / pull: 750N

Standard Stroke: S = 100mm

Minimum distance (the distance between the front and rear of the two holes) :L = S(stroke)+ 105mm putter between two holes = 2XS(travel)+ 105mm

No load speed: 10mm/s

Speed and thrust relationship: 5mm / s (kg) -50s (50kg)

Standard protection level: IP54

Speed: 12 mm/s

Noise level: 50 dB




Package Included:

1 x Electric Linear Actuator Motor
2 x Bracket

2 x bolt

2 x cotter pin for the linear actuators













Features

  • Electric putter, also known as push rod motor, electric cylinder and linear actuator
  • The electric putter is an electric drive that converts the motor's rotational motion into a straight reciprocating motion of the push rod
  • Can be used in a variety of simple or complex process as the implementation of mechanical use, in order to achieve long-range control, centralized control or automatic control
  • Main use: electric medical bed, electric sofa, electric stand lift rod, industrial electric lift system, camera frame, video machine, wedding system
  • Low noise design,noise level is 50dB
  • See more on Amazon...

Brand: Focket   |   Manufacturer: Focket

Amazon Price: $39.92 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $40.73

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Galaxy A8 2018 Screen Protector, UNEXTATI Premium HD [Easy Install] [Anti-Fingerprint] Tempered Glass Screen Protector Film for Samsung Galaxy A8 2018 (1 Pack)

 Ean: 6194634764347   |    PartNumber: SS1US09-A82018-1   |   Asin: B07SG49LXW

Retail Package Includes
1x Galaxy A8 2018 Tempered Glass Screen Protector, 1x Wet Wipes, 1x Microfiber Cloth, 1x Dust Removal, 1x Guide Sticker

Features

  • Retail Package Includes: 1x Galaxy A8 2018 Tempered Glass Screen Protector, 1x Wet Wipes, 1x Microfiber Cloth, 1x Dust Removal, 1x Guide Sticker
  • Made of real tempered glass that protects the original screen from shattering, with an industry leading hardness of 9H
  • 99.99% High-definition clear hydrophobic and oleophobic screen coating protects against sweat and oil residue from fingerprints
  • Silicone bubble-free adhesive adheres to the phone's screen without any gaps or bubbles, leaving the touch sensitivity unaffected
  • Lifetime Warranty: Provides easy lifetime protection for your screen protector
  • See more on Amazon...

Brand: UNEXTATI   |   Manufacturer: UNEXTATI

Amazon Price: $4.98 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

DC6V / 12V GA13N20 Gear Box Motor Electric Gear Motor for Car Model/Robot/DIY Micro Gear Box Speed Reducing Motor DC 12V Gear Box Reversible High Torque(12V 500RPM)

 Ean: 0750086938246   |    PartNumber: Vikyebm31n6p2cg-08   |   Asin: B07RTY644K

Features:
This DC motor features large moment of force, low speed, and low noise. The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life. This electronic gear motor is good replacement for old or worn electronic deceleration motor, useful and practical. Widely used for electronic door lock ,small robots, electronic DIY toy car. This motor is adopted of pure copper wire coil, with low heat and low loss.
Specification:
Model: GA13N20
Rated power: 2W
Optional type: 6V 30RPM, 6V 60RPM, 6V 100RPM, 6V 300RPM, 6V 600RPM, 12V 60RPM, 12V 200RPM, 12V 500RPM, 12V 1000RPM
3C rated voltage range:

Features

  • This DC motor features large moment of force, low speed, and low noise
  • The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life
  • This electronic gear motor is good replacement for old or worn electronic deceleration motor, useful and practical
  • Widely used for electronic door lock ,small robots, electronic DIY toy car
  • This motor is adopted of pure copper wire coil, with low heat and low loss
  • See more on Amazon...

Brand: Vikye   |   Manufacturer: Vikye

Item Dimensions: 0.79 x 0.79 x 1.97 inches (2.0 x 2.0 x 5.0 cm)   |   

Amazon Price: $7.75 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

DC6V / 12V GA13N20 Gear Box Motor Electric Gear Motor for Car Model/Robot/DIY Micro Gear Box Speed Reducing Motor DC 12V Gear Box Reversible High Torque(12V 1000RPM)

 Ean: 0750086938253   |    PartNumber: Vikyebm31n6p2cg-09   |   Asin: B07RSRYGWY

Features:
This DC motor features large moment of force, low speed, and low noise. The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life. This electronic gear motor is good replacement for old or worn electronic deceleration motor, useful and practical. Widely used for electronic door lock ,small robots, electronic DIY toy car. This motor is adopted of pure copper wire coil, with low heat and low loss.
Specification:
Model: GA13N20
Rated power: 2W
Optional type: 6V 30RPM, 6V 60RPM, 6V 100RPM, 6V 300RPM, 6V 600RPM, 12V 60RPM, 12V 200RPM, 12V 500RPM, 12V 1000RPM
3C rated voltage range:

Features

  • This DC motor features large moment of force, low speed, and low noise
  • The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life
  • This electronic gear motor is good replacement for old or worn electronic deceleration motor, useful and practical
  • Widely used for electronic door lock ,small robots, electronic DIY toy car
  • This motor is adopted of pure copper wire coil, with low heat and low loss
  • See more on Amazon...

Brand: Vikye   |   Manufacturer: Vikye

Item Dimensions: 0.79 x 0.79 x 1.97 inches (2.0 x 2.0 x 5.0 cm)   |   

Amazon Price: $7.75 | as of 08/19/2019(12:10pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth Mixing Down Mixing Dual Balanced Mi...
  2. Akzon AD831 500MHz Active Mixer Module Bandwidth High Linearity Low Distortion Active RF Mixer Modul...
  3. Frequency Synthesizer - 35M-4.4GHz RF Signal Source Phase Locking Loop Frequency Synthesizer ADF4351...
  4. Radio Frequency RF Mixer Microwave Double Balanced RFin=1.5-4.5GHz RFout=DC-1.5GHz LO=312
  5. Passive Double-Balanced Mixer, HMC213 RF Passive Mixer Diode Frequency Conversion Module
  6. High Frequency RF Mixer Frequency Converter AD831 RF Input 0.1-500MHz
  7. Lowrance 000-11300-001 SonarHub Module with Transom Chirp Transducer
  8. 10K Potentiometer Frequency Converter VSD VFD For Variable Speed Drive Inverter - Arduino Compatible...
  9. 1PC RF Envelope Detector Amplitude Detection
  10. 1pc AD831 High Frequency RF/Mixer/Frequency Converter

Most Wished For

  1. AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth Mixing Down Mixing Dual Balanced Mi...
  2. Akzon AD831 500MHz Active Mixer Module Bandwidth High Linearity Low Distortion Active RF Mixer Modul...
  3. Frequency Synthesizer - 35M-4.4GHz RF Signal Source Phase Locking Loop Frequency Synthesizer ADF4351...
  4. Radio Frequency RF Mixer Microwave Double Balanced RFin=1.5-4.5GHz RFout=DC-1.5GHz LO=312
  5. Passive Double-Balanced Mixer, HMC213 RF Passive Mixer Diode Frequency Conversion Module
  6. High Frequency RF Mixer Frequency Converter AD831 RF Input 0.1-500MHz
  7. Lowrance 000-11300-001 SonarHub Module with Transom Chirp Transducer
  8. 10K Potentiometer Frequency Converter VSD VFD For Variable Speed Drive Inverter - Arduino Compatible...
  9. 1PC RF Envelope Detector Amplitude Detection
  10. 1pc AD831 High Frequency RF/Mixer/Frequency Converter

Most Gifted

  1. AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth Mixing Down Mixing Dual Balanced Mi...
  2. Akzon AD831 500MHz Active Mixer Module Bandwidth High Linearity Low Distortion Active RF Mixer Modul...
  3. Frequency Synthesizer - 35M-4.4GHz RF Signal Source Phase Locking Loop Frequency Synthesizer ADF4351...
  4. Radio Frequency RF Mixer Microwave Double Balanced RFin=1.5-4.5GHz RFout=DC-1.5GHz LO=312
  5. Passive Double-Balanced Mixer, HMC213 RF Passive Mixer Diode Frequency Conversion Module
  6. High Frequency RF Mixer Frequency Converter AD831 RF Input 0.1-500MHz
  7. Lowrance 000-11300-001 SonarHub Module with Transom Chirp Transducer
  8. 10K Potentiometer Frequency Converter VSD VFD For Variable Speed Drive Inverter - Arduino Compatible...
  9. 1PC RF Envelope Detector Amplitude Detection
  10. 1pc AD831 High Frequency RF/Mixer/Frequency Converter

Top Selling

  1. AD831 High Frequency Transducer RF Mixer Module 500MHz Bandwidth Mixing Down Mixing Dual Balanced Mi...
  2. Akzon AD831 500MHz Active Mixer Module Bandwidth High Linearity Low Distortion Active RF Mixer Modul...
  3. Frequency Synthesizer - 35M-4.4GHz RF Signal Source Phase Locking Loop Frequency Synthesizer ADF4351...
  4. Radio Frequency RF Mixer Microwave Double Balanced RFin=1.5-4.5GHz RFout=DC-1.5GHz LO=312
  5. Passive Double-Balanced Mixer, HMC213 RF Passive Mixer Diode Frequency Conversion Module
  6. High Frequency RF Mixer Frequency Converter AD831 RF Input 0.1-500MHz
  7. Lowrance 000-11300-001 SonarHub Module with Transom Chirp Transducer
  8. 10K Potentiometer Frequency Converter VSD VFD For Variable Speed Drive Inverter - Arduino Compatible...
  9. 1PC RF Envelope Detector Amplitude Detection
  10. 1pc AD831 High Frequency RF/Mixer/Frequency Converter



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect