Frontpage > Industrial > Industrial Hardware > Rope & Chain Pulls

Best Rope & Chain Pulls - Buying Guide

Last Updated: 11/19/2018

Share on

Bestselling Rope & Chain Pulls on Amazon

  1. Posi Lock 210 Manual Puller, 2 Jaws, 14 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" ...
  2. Posi Lock 110 Manual Puller, 3 Jaws, 20 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" ...
  3. Innovative Components AN3/640600X3Q7X 6.00" long, .047" diameter Stainless Steel wire rope lanyard, ...
  4. Posi Lock 106 Manual Puller, 3 Jaws, 10 tons Capacity, 6" Reach, 1/4" - 7" Spread Range, 13-1/3" Ove...
  5. Posi Lock TJ-1 Transmission Bearing Puller, 2 Jaw, 9-1/4" Reach, 2-3/4" - 14-3/4" Spread Range
  6. Posi Lock HP-40 Large Hub Collar Adapter, 0 to 2 Hub Range, For Use With HP-1 and HP-2
  7. Posi Lock 204 Manual Puller, 2 Jaws, 2 tons Capacity, 4" Reach, 1/2" - 5" Spread Range, 10" Overall ...
  8. Posi Lock HP-70 Tip Reducer/Extender
  9. Posi Lock 208 Manual Puller, 2 Jaws, 12 tons Capacity, 8" Reach, 3/4" - 12" Spread Range, 16-1/4" Ov...
  10. Posi Lock 203 Manual Puller, 2 Jaws, 2 tons Capacity, 3" Reach, 1/4" - 4-1/4" Spread Range, 7" Overa...

  #1

Posi Lock 210 Manual Puller, 2 Jaws, 14 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" Overall Length

Model: 210   |    Mpn: 210   |    Ean: 0733477000791   |    PartNumber: 210   |   Asin: B001BFA2R4

This Posi Lock 210 manual puller has a 14-ton pulling capacity, has two jaws for working in compact spaces, and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. The center bolt has a 0.75" (19 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 9.67" (246 mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.

Specifications Puller 2-jaw Pulling capacity 14 tons Center bolt diameter 0.75" (19 mm) Reach 9.67" (246 mm) Spread range 1 to 15 inches (25 to 381 mm) Maximum torque 175 ft-lb. (237 N-m) Hex socket size 1" (25.4 mm) Overall length 20.41" (518.4 mm) Jaw width 1" (25.4 mm) Weight 13 lb. (5.9 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Manual puller with two jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Two-jaw construction for working in compact spaces
  • Forged steel jaws for increased strength over investment casting
  • 14-ton pulling capacity, 9.67 (246mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage
  • Tapered jaws for better access in tight spaces
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Item Dimensions: 5 x 8.5 x 20.51 inches (12.7 x 21.6 x 52.1 cm)   |   Package Dimensions: 6.6 x 8.9 x 20.9 inches (16.8 x 22.6 x 53.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Posi Lock 110 Manual Puller, 3 Jaws, 20 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" Overall Length

Model: 110   |    Mpn: 110   |    Ean: 0733477000340   |    PartNumber: 110   |   Asin: B001BAD2N0

This Posi Lock 110 manual puller has a 20-ton pulling capacity; has three jaws for equal load distribution, secure hold, and concentric pulling action; and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. The center bolt has a 0.75" (19 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 9.67" (246 mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.

Specifications Puller 3-jaw Pulling capacity 20 tons Center bolt diameter 0.75" (19 mm) Reach 9.67" (246 mm) Spread range 1 to 15 inches (25 to 381 mm) Maximum torque 275 ft-lb. (372 N-m) Hex socket size 1" (25.4 mm) Overall length 20.41" (518.4 mm) Jaw width 1" (25.4 mm) Weight 16 lb. (7.3 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action
  • Forged steel jaws for increased strength over investment casting
  • 20-ton pulling capacity, 9.67 (246mm) reach and a spread range of 1 to 15 inches (25 to 381 mm) for increased pulling leverage
  • Tapered jaws for better access in tight spaces
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Item Dimensions: 6.6 x 9.2 x 20.8 inches (16.8 x 23.4 x 52.8 cm)   |   Package Dimensions: 7.01 x 9.49 x 20.98 inches (17.8 x 24.1 x 53.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Innovative Components AN3/640600X3Q7X 6.00" long, .047" diameter Stainless Steel wire rope lanyard, green coated to .063" , Terminus Ends Loop-/ Loop Tab with .25 " ID hole (Pack of 10)

Model: AN3/640600X3Q7X   |    Mpn: AN3/640600X3Q7X   |    PartNumber: AN3/640600X3Q7X   |   Asin: B00GOSCFIM

6.00" long, .047" diameter Stainless Steel wire rope lanyard, green coated to .063" , Terminus Ends Loop-/ Loop Tab with .25 " ID hole

Features

  • Used for retaining quick release pins and other itmes to frames or fixtires so the pins do not get lost when not in use
  • Used to attach componetns to each other
  • For tethering purposes only Standard parts are not load rated
  • AN3/640600X3Q7X
  • See more on Amazon...

Brand: Innovative Components   |   Manufacturer: Innovative Components

Package Dimensions: 0.75 x 7 x 7.5 inches (1.9 x 17.8 x 19.1 cm)

First Available: 2016-06-10

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Posi Lock 106 Manual Puller, 3 Jaws, 10 tons Capacity, 6" Reach, 1/4" - 7" Spread Range, 13-1/3" Overall Length

Model: 106   |    Mpn: 106   |    Ean: 0733477000180   |    PartNumber: 106   |   Asin: B0006TUB5E

This Posi Lock 106 manual puller has a 10-ton pulling capacity; has three jaws for equal load distribution, secure hold, and concentric pulling action; and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. The center bolt has a 0.62" (15.8 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 6" (152 mm) reach and a spread range of 0.5 to 7 inches (13 to 178 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.

Specifications Puller 3-jaw Pulling capacity 10 tons Center bolt diameter 0.62" (15.8 mm) Reach 6" (152 mm) Spread range 0.5 to 7 inches (13 to 178 mm) Maximum torque 130 ft-lb. (176 N-m) Hex socket size 0.75" (19 mm) Overall length 13.32" (338.3 mm) Jaw width 0.75" (19 mm) Weight 8 lb. (3.6 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action
  • Forged steel jaws for increased strength over investment casting
  • 10-ton pulling capacity, 6 (152mm) reach and a spread range of 0.5 to 7 inches (13 to 178 mm) for increased pulling leverage
  • Tapered jaws for better access in tight spaces
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Item Dimensions: 5.2 x 6.8 x 14.1 inches (13.2 x 17.3 x 35.8 cm)   |   Package Dimensions: 5.4 x 7 x 14 inches (13.7 x 17.8 x 35.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Posi Lock TJ-1 Transmission Bearing Puller, 2 Jaw, 9-1/4" Reach, 2-3/4" - 14-3/4" Spread Range

Model: TJ-1   |    Mpn: TJ-1   |    Ean: 0733477003761   |    PartNumber: TJ-1   |   Asin: B0042P6JC2

This Posi Lock TJ-1 manual transmission bearing puller has two jaws for working in compact spaces and is suitable for extracting shaft-fitted transmission bearings. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. They can fit into a bearing's snap ring groove as narrow as 0.07". This puller has a 9.25" (235 mm) reach and a spread range of 2.75 to 14.75 inches (70 to 375 mm) for increased pulling leverage, and it comes with a tip protector to prevent the tip of the center bolt from mushrooming and provide increased leverage for pulling operations. This manual transmission bearing puller is suitable for extracting shaft-fitted bearings in the automotive industry.

Specifications Puller 2-jaw Reach 9.25" (235 mm) Spread range 2.75 to 14.75 inches (70 to 375 mm) Weight 12 lb. (5.4 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

What's in the Box? TJ-1 puller P10 tip protector

Features

  • Manual transmission bearing puller with two jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Two-jaw construction for working in compact spaces
  • Forged steel jaws for increased strength over investment casting
  • 9.25 (235 mm) reach and a spread range of 2.75 to 14.75 inches (70 to 375 mm) for increased pulling leverage
  • Tapered jaws can fit into snap ring grooves as narrow as 0.07
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Item Dimensions: 5 x 8.5 x 20.51 inches (12.7 x 21.6 x 52.1 cm)   |   Package Dimensions: 5.2 x 7.9 x 20.6 inches (13.2 x 20.1 x 52.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Posi Lock HP-40 Large Hub Collar Adapter, 0 to 2 Hub Range, For Use With HP-1 and HP-2

Model: HP-40   |    Mpn: HP-40   |    Ean: 0733477001361   |    PartNumber: HP-40   |   Asin: B0042P6JVS

This Posi Lock HP-40 large hub collar adapter is for use with the HP-1 and HP-2 hub puller adapters (sold separately), which simplify removal of many industrial fans, automotive fans, and blower wheels. It has a 0 to 2 hub range and four set screws that secure the collar to the hub for extraction. It is made of steel to help prevent rust and corrosion. It is suitable for use with chillers, freezers, condensers, ice machines, furnace fans, convection ovens, exhaust and ventilation fans, defrost and air conditioning fans.

Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND and meets International Organization for Standardization (ISO) 9002:1994 standards.

Features

  • Large hub collar adapter with a 0 to 2" hub range and set screws that secure puller to the hub
  • Works with Posi Lock HP-1 and HP-2 (sold separately)
  • Steel to help prevent rust and corrosion
  • Suitable for chillers, freezers, condensers, ice machines, furnace fans, convection ovens, exhaust and ventilation fans, defrost and air conditioning fans
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Package Dimensions: 2.2 x 2.6 x 3 inches (5.6 x 6.6 x 7.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Posi Lock 204 Manual Puller, 2 Jaws, 2 tons Capacity, 4" Reach, 1/2" - 5" Spread Range, 10" Overall Length

Model: 204   |    Mpn: 204   |    Ean: 0733477000685   |    PartNumber: 204   |   Asin: B001BCLQKO

This Posi Lock 204 manual puller has a 2-ton pulling capacity, has two jaws for working in compact spaces, and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made with forged steel for increased strength over investment casting and are tapered for better access in tight spaces. The center bolt has a 0.5" (12.7 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 4" (102 mm) reach and a spread range of 0.5 to 5 inches (13 to 127 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.

Specifications Puller 2-jaw Pulling capacity 2 tons Center bolt diameter 0.5" (12.7 mm) Reach 4" (102 mm) Spread range 0.5 to 5 inches (13 to 127 mm) Maximum torque 20 ft-lb. (27 N-m) Hex socket size 0.75" (19 mm) Overall length 10.05" (255.3 mm) Jaw width 0.62" (15.8 mm) Weight 3.2 lb. (1.5 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Manual puller with two jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Two-jaw construction for working in compact spaces
  • Forged steel jaws for increased strength over investment casting
  • 2-ton pulling capacity, 4 (102 mm) reach and a spread range of 0.5 to 5 inches (13 to 127 mm) for increased pulling leverage
  • Tapered jaws for better access in tight spaces
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Item Dimensions: 4.02 x 5.51 x 12.01 inches (10.2 x 14.0 x 30.5 cm)   |   Package Dimensions: 3.9 x 5 x 11.6 inches (9.9 x 12.7 x 29.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Posi Lock HP-70 Tip Reducer/Extender

Model: HP-70   |    Mpn: HP-70   |    Ean: 0733477001385   |    PartNumber: HP-70   |   Asin: B0042P6JWM

The hub collar's unique design will remove fans, blower wheels and bearings.

Features

  • Price For: Each Item: Tip Reducer/Extender Country of Origin (subject to change): United States
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Package Dimensions: 1 x 1.2 x 2.6 inches (2.5 x 3.0 x 6.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Posi Lock 208 Manual Puller, 2 Jaws, 12 tons Capacity, 8" Reach, 3/4" - 12" Spread Range, 16-1/4" Overall Length

Model: 208   |    Mpn: 208   |    Ean: 0733477000760   |    PartNumber: 208   |   Asin: B001BEZCAM

This Posi Lock 208 manual puller has a 12-ton pulling capacity, has two jaws for working in compact spaces, and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. The center bolt has a 0.75" (19 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has an 8" (203 mm) reach and a spread range of 0.75 to 12 inches (19 to 305 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.

Specifications Puller 2-jaw Pulling capacity 12 tons Center bolt diameter 0.75" (19 mm) Reach 8" (203 mm) Spread range 0.75 to 12 inches (19 to 305 mm) Maximum torque 150 ft-lb. (203 N-m) Hex socket size 1" (25.4 mm) Overall length 16.25" (412.8 mm) Jaw width 0.88" (22.2 mm) Weight 12 lb. (5.4 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Manual puller with two jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Two-jaw construction for working in compact spaces
  • Forged steel jaws for increased strength over investment casting
  • 12-ton pulling capacity, 8 (203 mm) reach and a spread range of 0.75 to 12 inches (19 to 305 mm) for increased pulling leverage
  • Tapered jaws for better access in tight spaces
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Item Dimensions: 5 x 8.5 x 20.51 inches (12.7 x 21.6 x 52.1 cm)   |   Package Dimensions: 7 x 8 x 21 inches (17.8 x 20.3 x 53.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Posi Lock 203 Manual Puller, 2 Jaws, 2 tons Capacity, 3" Reach, 1/4" - 4-1/4" Spread Range, 7" Overall Length

Model: 203   |    Mpn: 203   |    Ean: 0733477003754   |    PartNumber: 203   |   Asin: B001B8BI6U

This Posi Lock 203 manual puller has a 2-ton pulling capacity, has two jaws for working in compact spaces, and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made with an investment-cast steel alloy for strength and durability and are tapered for better access in tight spaces. The center bolt has a 0.37" (9.4 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 3" (76.2 mm) reach and a spread range of 0.25 to 4.25" (6.4 to 114.3 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.

Specifications Puller 2-jaw Pulling capacity 2 tons Center bolt diameter 0.37" (9.4 mm) Reach 3" (76.2 mm) Spread range 0.25 to 4.25 inches (6.4 to 114.3 mm) Overall length 7" (177.8 mm) Jaw width 0.31" (8 mm) Weight 1.12 lb. (0.51 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Manual puller with two jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Two-jaw construction for working in compact spaces
  • Investment cast steel alloy jaws for strength and durability
  • 2-ton pulling capacity, 3 (76.2mm) reach and a spread range of 0.25 to 4.25 inches (6.4 to 114.3 mm) for increased pulling leverage
  • Tapered jaws for better access in tight spaces
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Item Dimensions: 4.02 x 5.51 x 12.01 inches (10.2 x 14.0 x 30.5 cm)   |   Package Dimensions: 3.3 x 4 x 9.5 inches (8.4 x 10.2 x 24.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Posi Lock HP-30 Small Hub Collar Adapter, 0 to 1.5 Hub Range, For Use With HP-1 and HP-2

Model: HP-30   |    Mpn: HP-30   |    Ean: 0733477001354   |    PartNumber: HP-30   |   Asin: B0042P6JVI

This Posi Lock HP-30 small hub collar adapter is for use with the HP-1 and HP-2 hub puller adapters (sold separately), which simplify removal of many industrial fans, automotive fans, and blower wheels. It has a 0 to 1.5 hub range and four set screws that secure the collar to the hub for extraction. It is made of steel to help prevent rust and corrosion. It is suitable for use with chillers, freezers, condensers, ice machines, furnace fans, convection ovens, exhaust and ventilation fans, defrost and air conditioning fans.

Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND and meets International Organization for Standardization (ISO) 9002:1994 standards.

Features

  • Small hub collar adapter with a 0 to 1.5" hub range and four set screws that secure puller to the hub
  • Works with Posi Lock HP-1 and HP-2 (sold separately)
  • Steel to help prevent rust and corrosion
  • Suitable for chillers, freezers, condensers, ice machines, furnace fans, convection ovens, exhaust and ventilation fans, defrost and air conditioning fans
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Package Dimensions: 3 x 3.3 x 3.8 inches (7.6 x 8.4 x 9.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Posi Lock 10454 Puller Jaw, For Use With 104 and 204 Puller

Model: 10454   |    Mpn: 10454   |    Ean: 0733477000050   |    PartNumber: 10454   |   Asin: B0042P6KBC

This Posi Lock 10454 puller jaw is made of forged steel for increased strength over investment casting, and is suitable as a replacement jaw for Posi Lock 104 and 204 pullers. The jaw works together with two other jaws (not included) on the puller's jaw head assembly. This puller jaw is suitable for extracting shaft-fitted parts in a range of industries, with an appropriate puller.

Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Replacement puller jaw for use with Posi Lock 104 and 204 pullers
  • Works with two other jaws (not included) on jaw head assembly
  • Forged steel for increased strength over investment casting
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Package Dimensions: 2.4 x 4.4 x 4.7 inches (6.1 x 11.2 x 11.9 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Posi Lock P10 Puller Tip Protector, For Use With 108, 208, 110, 210 Pullers

Model: P10   |    Mpn: P10   |    Ean: 0733477001576   |    PartNumber: P10   |   Asin: B00270XK1W

This Posi Lock P10 puller tip protector is made of steel for strength and durability, and is suitable for use with Posi Lock 108, 208, 110, and 210 pullers. The protector fits over the tip of the center bolt, which allows it to spin freely while in use, protects it from mushrooming under pressure, and provides additional leverage for the pulling operation. This puller tip protector is suitable for extracting shaft-fitted parts in a range of industries, with an appropriate puller.

Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Tip protector for use with Posi Lock 108, 208, 110, and 210 pullers
  • Prevents center bolt tip from mushrooming and provides additional leverage
  • Steel construction for strength and durability
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Item Dimensions: 2.2 x 2.3 x 3.8 inches (5.6 x 5.8 x 9.7 cm)   |   Package Dimensions: 1.3 x 1.7 x 2 inches (3.3 x 4.3 x 5.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Posi Lock 10658 Puller Center Bolt, 5/8" Diameter, For Use With 106 and 206 Puller

Model: 10658   |    Mpn: 10658   |    Ean: 0733477000265   |    PartNumber: 10658   |   Asin: B0042P6KKS

This Posi Lock 10658 puller center bolt is made of steel for strength and durability, has a 5/8" diameter, and is suitable as a replacement center bolt for use with Posi Lock 106 and 206 pullers. The center bolt provides counter pressure in external pulling applications. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This center bolt is suitable for extracting shaft-fitted parts in a range of industries, with an appropriate puller.

Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Replacement center bolt for use with Posi Lock 106 and 206 pullers
  • Provides counter pressure in external pulling applications
  • Steel construction for strength and durability
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Package Dimensions: 1 x 2.2 x 13 inches (2.5 x 5.6 x 33.0 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Posi Lock PM4 Puller Set, 5 to 20-Ton Capacity

Model: PM4   |    Mpn: PM4   |    Ean: 0733477003150   |    PartNumber: PM4   |   Asin: B0042P6JCW

This Posi Lock PM4 manual puller set consists of a three-jaw puller with a 5-ton capacity (model 104), a three-jaw puller with a 10-ton capacity (model 106), a two-jaw puller with a 6-ton capacity (model 206), and a three-jaw puller with a 20-ton capacity (model 110). It is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. The jaws of each puller are made of forged steel for increased strength over investment casting. The set comes with a tool board for convenient storage, and four tip protectors that protect the center bolt tip and provide additional leverage for pulling operations. This manual puller set is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.

Specifications Model 104 puller 3-jaw Model 104 pulling capacity 5 tons Model 104 center bolt diameter 0.5" (12.7 mm) Model 104 reach 4" (102 mm) Model 104 spread range 0.5 to 5 inches (12.7 to 127 mm) Model 104 overall length 10.05" (255.3 mm) Model 104 weight 4.1 lb. (1.9 kg) Model 106 puller 3-jaw Model 106 pulling capacity 10 tons Model 106 center bolt diameter 0.62" (15.8 mm) Model 106 reach 6" (152 mm) Model 106 spread range 0.5 to 7 inches (12.7 to 178 mm) Model 106 overall length 13.32" (338.3 mm) Model 106 weight 8 lb. (3.6 kg) Model 206 puller 2-jaw Model 206 pulling capacity 6 tons Model 206 center bolt diameter 0.62" (15.8 mm) Model 206 reach 6" (152 mm) Model 206 spread range 0.5 to 7 inches (12.7 to 178 mm) Model 206 overall length 13.32" (338.3 mm) Model 206 weight 7 lb. (3.2 kg) Model 110 puller 3-jaw Model 110 pulling capacity 20 tons Model 110 center bolt diameter 0.75" (19 mm) Model 110 reach 9.67" (246 mm) Model 110 spread range 1 to 15 inches (25 to 381 mm) Model 110 overall length 20.41" (518.4 mm) Model 110 weight 16 lb. (7.3 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

What's in the Box? 104 puller 106 puller 206 puller 110 puller P4 tip protector Two P6 tip protectors P10 tip protector Tool board Hangers

Features

  • Four-piece manual puller set for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Three three-jaw pullers and one two-jaw puller to meet the requirements of varied applications
  • Forged steel jaws for increased strength over investment casting
  • Pulling capacities from 5 to 20 tons
  • Comes with four tip protectors and a tool board for convenient storage
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Package Dimensions: 15.5 x 16.5 x 28.8 inches (39.4 x 41.9 x 73.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Posi Lock 10354 Puller Jaw, For Use With 103 and 203 Puller

Model: 10354   |    Mpn: 10354   |    Ean: 0733477003853   |    PartNumber: 10354   |   Asin: B0042P6K6M

This Posi Lock 10354 puller jaw is made of an investment casted steel alloy for strength and durability, and is suitable as a replacement jaw for Posi Lock 103 and 203 pullers. The jaw works together with two other jaws (not included) on the puller's jaw head assembly. This puller jaw is suitable for extracting shaft-fitted parts in a range of industries, with an appropriate puller.

Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Replacement puller jaw for use with Posi Lock 103 and 203 pullers
  • Works with two other jaws (not included) on jaw head assembly
  • Investment cast steel alloy for strength and durability
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Package Dimensions: 0.3 x 2.7 x 3 inches (0.8 x 6.9 x 7.6 cm)

First Available: 2017-12-12

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Posi Lock 103 Manual Puller, 3 Jaws, 2 tons Capacity, 3" Reach, 1/4" - 4-1/4" Spread Range, 7" Overall Length

Model: 103   |    Mpn: 103   |    Ean: 0733477003730   |    PartNumber: 103   |   Asin: B002KGDRRA

This Posi Lock 103 manual puller has a 2-ton pulling capacity; has three jaws for equal load distribution, secure hold, and concentric pulling action; and is suitable for extracting shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys. Its jaws are made with an investment-casted steel alloy for strength and durability and are tapered for better access in tight spaces. The center bolt has a 0.37" (9.4 mm) diameter. The diameter of the center bolt must be at least half the diameter of the shaft along which the object is pulled. This puller has a 3" (76.2 mm) reach and a spread range of 0.25 to 4.25" (6.4 to 114.3 mm) for increased pulling leverage. This manual puller is suitable for extracting shaft-fitted parts in a range of industries, including automotive, HVAC, wind power, and others.

Specifications Puller 3-jaw Pulling capacity 2 tons Center bolt diameter 0.37" (9.4 mm) Reach 3" (76.2 mm) Spread range 0.25 to 4.25 inches (6.4 to 114.3 mm) Overall length 7" (177.8 mm) Jaw width 0.31" (8 mm) Weight 1.3 lb. (0.59 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Manual puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action
  • Investment cast steel alloy jaws for strength and durability
  • 2-ton pulling capacity, 3 (76.2mm) reach and a spread range of 0.25 to 4.25 inches (6.4 to 114.3 mm) for increased pulling leverage
  • Tapered jaws for better access in tight spaces
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Package Dimensions: 3.5 x 3.5 x 8.5 inches (8.9 x 8.9 x 21.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Posi Lock TJ-2 Transmission Bearing Puller, 3 Jaw, 5-1/4" Reach, 1" - 6-3/4" Spread Range

Model: TJ-2   |    Mpn: TJ-2   |    Ean: 0733477004034   |    PartNumber: TJ-2   |   Asin: B0042P6JCC

This Posi Lock TJ-2 manual transmission bearing puller has three jaws for equal load distribution, secure hold, and concentric pulling action, and is suitable for extracting shaft-fitted transmission bearings. Its jaws are made of forged steel for increased strength over investment casting, and are tapered for better access in tight spaces. They can fit into a bearing's snap ring groove as narrow as 0.07". This puller has a 5.25" (133 mm) reach and a spread range of 1 to 6.75 inches (25 to 171 mm) for increased pulling leverage, and it comes with a tip protector to prevent the tip of the center bolt from mushrooming and provide increased leverage for pulling operations. This manual transmission bearing puller is suitable for extracting shaft-fitted bearings in the automotive industry.

Specifications Puller 3-jaw Reach 5.25" (133 mm) Spread range 1 to 6.75 inches (25 to 171 mm) Weight 8 lb. (3.6 kg) Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

What's in the Box? TJ-2 puller P6 tip protector

Features

  • Manual transmission bearing puller with three jaws for extraction of most shaft-fitted parts, including bearings, wheels, bushings, gears, and pulleys
  • Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action
  • Forged steel jaws for increased strength over investment casting
  • 5.25 (133 mm) reach and a spread range of 1 to 6.75 inches (25 to 171 mm) for increased pulling leverage
  • Tapered jaws can fit into snap ring grooves as narrow as 0.07
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Item Dimensions: 5.51 x 7.01 x 14.02 inches (14.0 x 17.8 x 35.6 cm)   |   Package Dimensions: 5.2 x 7.1 x 14.1 inches (13.2 x 18.0 x 35.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Posi Lock P6 Puller Tip Protector, For Use With 106 and 206 Pullers

Model: P6   |    Mpn: P6   |    Ean: 0733477001606   |    PartNumber: P6   |   Asin: B00270SVGQ

This Posi Lock P6 puller tip protector is made of steel for strength and durability, and is suitable for use with Posi Lock 106 and 206 pullers. The protector fits over the tip of the center bolt, which allows it to spin freely while in use, protects it from mushrooming under pressure, and provides additional leverage for the pulling operation. This puller tip protector is suitable for extracting shaft-fitted parts in a range of industries, with an appropriate puller.

Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND.

Features

  • Tip protector for use with Posi Lock 106 and 206 pullers
  • Prevents center bolt tip from mushrooming and provides additional leverage
  • Steel construction for strength and durability
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Package Dimensions: 0.7 x 1.7 x 2.5 inches (1.8 x 4.3 x 6.4 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Posi Lock HP-2 Hub Puller Adapter Set, 5-Ton Pulling Capacity

Model: HP-2   |    Mpn: HP-2   |    Ean: 0733477001347   |    PartNumber: HP-2   |   Asin: B00207T6EM

This Posi Lock HP-2 hub puller adapter set has 5 tons of pulling capacity and includes a puller and two collar adapters for removing many industrial fans, automotive fans, and blower wheels from housings or shafts, reducing the force required to dismount the part. The items in this set are constructed of steel to help prevent rust and corrosion. The hub collar design allows technicians to quickly remove fans, blower wheels, and bearings by providing a solid connection between the puller and fan hub. The hub puller set includes a 104 puller, an HP-30 small collar adapter, an HP-40 large collar adapter, HP-70 tip reducer/extender for managing the length of the center bolt, and a molded plastic carrying case that is. This Posi Lock hub puller adapter set is suitable for extracting fans and blower wheels from chillers, freezers, condensers, ice machines, furnace fans, convection ovens, exhaust and ventilation fans, defrost and air conditioning fans in applications in the automotive, agricultural, and manufacturing industries.

Specifications Pulling capacity 5 tons Reach 4 Spread range 0.5 to 5 Carrying case 13 x 9.5 x 5.5 inches/330 x 241 x 140mm (H x W x D)
(H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)

Gear and bearing pullers are tools designed to remove mechanical, press-fit parts, such as bearings, bushings, gears, and pulleys, from a shaft, or to remove a shaft from inside a hole. Pullers have three main parts the center bolt, gripping jaws, and T-handle and can be operated manually or hydraulically. The jaws of the puller form a claw that grips the edge of the gear, which is pulled off the shaft when the screw is turned. Pullers are typically configured with two or three jaws and can be constructed of iron, steel, or other alloyed metal. Pullers can be used manually or can be powered by a hydraulic cylinder, adding speed and precision, and reducing the physical labor required for pulls. With a hydraulic puller, compressed air is forced through the cylinder by a pump that is either connected by hose to the puller or is integral to it. Pullers are used in hundreds of applications in the automotive, agricultural, and manufacturing industries, among others.

Posi Lock manufactures pulling jaws, vises, and specialty tools. The company, founded in 1978, is headquartered in Cooperstown, ND and meets International Organization for Standardization (ISO) 9002:1994 standards.

What s in the Box? 104 puller HP-30 small collar adapter HP-40 large collar adapter HP-70 tip reducer/extender Carrying case

Features

  • 5-ton pulling capacity hub puller adapter set simplifies removal of many industrial fans, automotive fans, and blower wheels
  • Steel to help prevent rust and corrosion
  • Hub collar design quickly removes fans, blower wheels, and bearings by providing a solid connection between the puller and fan hub
  • Suitable for chillers, freezers, condensers, ice machines, furnace fans, convection ovens, exhaust and ventilation fans, defrost and air conditioning fans
  • Hub puller set includes 104 puller, HP-30 small collar adapter, HP-40 large collar adapter, HP-70 tip reducer/extender, and a carrying case
  • See more on Amazon...

Brand: Posi Lock Puller   |   Manufacturer: Posi Lock Puller, Inc

Item Dimensions: 6.5 x 10 x 13.5 inches (16.5 x 25.4 x 34.3 cm)   |   Package Dimensions: 7.3 x 10 x 13.9 inches (18.5 x 25.4 x 35.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Posi Lock 210 Manual Puller, 2 Jaws, 14 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" ...
  2. Posi Lock 110 Manual Puller, 3 Jaws, 20 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" ...
  3. Innovative Components AN3/640600X3Q7X 6.00" long, .047" diameter Stainless Steel wire rope lanyard, ...
  4. Posi Lock 106 Manual Puller, 3 Jaws, 10 tons Capacity, 6" Reach, 1/4" - 7" Spread Range, 13-1/3" Ove...
  5. Posi Lock TJ-1 Transmission Bearing Puller, 2 Jaw, 9-1/4" Reach, 2-3/4" - 14-3/4" Spread Range
  6. Posi Lock HP-40 Large Hub Collar Adapter, 0 to 2” Hub Range, For Use With HP-1 and HP-2
  7. Posi Lock 204 Manual Puller, 2 Jaws, 2 tons Capacity, 4" Reach, 1/2" - 5" Spread Range, 10" Overall ...
  8. Posi Lock HP-70 Tip Reducer/Extender
  9. Posi Lock 208 Manual Puller, 2 Jaws, 12 tons Capacity, 8" Reach, 3/4" - 12" Spread Range, 16-1/4" Ov...
  10. Posi Lock 203 Manual Puller, 2 Jaws, 2 tons Capacity, 3" Reach, 1/4" - 4-1/4" Spread Range, 7" Overa...

Most Wished For

  1. Posi Lock 210 Manual Puller, 2 Jaws, 14 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" ...
  2. Posi Lock 110 Manual Puller, 3 Jaws, 20 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" ...
  3. Innovative Components AN3/640600X3Q7X 6.00" long, .047" diameter Stainless Steel wire rope lanyard, ...
  4. Posi Lock 106 Manual Puller, 3 Jaws, 10 tons Capacity, 6" Reach, 1/4" - 7" Spread Range, 13-1/3" Ove...
  5. Posi Lock TJ-1 Transmission Bearing Puller, 2 Jaw, 9-1/4" Reach, 2-3/4" - 14-3/4" Spread Range
  6. Posi Lock HP-40 Large Hub Collar Adapter, 0 to 2” Hub Range, For Use With HP-1 and HP-2
  7. Posi Lock 204 Manual Puller, 2 Jaws, 2 tons Capacity, 4" Reach, 1/2" - 5" Spread Range, 10" Overall ...
  8. Posi Lock HP-70 Tip Reducer/Extender
  9. Posi Lock 208 Manual Puller, 2 Jaws, 12 tons Capacity, 8" Reach, 3/4" - 12" Spread Range, 16-1/4" Ov...
  10. Posi Lock 203 Manual Puller, 2 Jaws, 2 tons Capacity, 3" Reach, 1/4" - 4-1/4" Spread Range, 7" Overa...

Most Gifted

  1. Posi Lock 210 Manual Puller, 2 Jaws, 14 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" ...
  2. Posi Lock 110 Manual Puller, 3 Jaws, 20 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" ...
  3. Innovative Components AN3/640600X3Q7X 6.00" long, .047" diameter Stainless Steel wire rope lanyard, ...
  4. Posi Lock 106 Manual Puller, 3 Jaws, 10 tons Capacity, 6" Reach, 1/4" - 7" Spread Range, 13-1/3" Ove...
  5. Posi Lock TJ-1 Transmission Bearing Puller, 2 Jaw, 9-1/4" Reach, 2-3/4" - 14-3/4" Spread Range
  6. Posi Lock HP-40 Large Hub Collar Adapter, 0 to 2” Hub Range, For Use With HP-1 and HP-2
  7. Posi Lock 204 Manual Puller, 2 Jaws, 2 tons Capacity, 4" Reach, 1/2" - 5" Spread Range, 10" Overall ...
  8. Posi Lock HP-70 Tip Reducer/Extender
  9. Posi Lock 208 Manual Puller, 2 Jaws, 12 tons Capacity, 8" Reach, 3/4" - 12" Spread Range, 16-1/4" Ov...
  10. Posi Lock 203 Manual Puller, 2 Jaws, 2 tons Capacity, 3" Reach, 1/4" - 4-1/4" Spread Range, 7" Overa...

Top Selling

  1. Posi Lock 210 Manual Puller, 2 Jaws, 14 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" ...
  2. Posi Lock 110 Manual Puller, 3 Jaws, 20 tons Capacity, 9-2/3" Reach, 1" - 15" Spread Range, 20-2/5" ...
  3. Innovative Components AN3/640600X3Q7X 6.00" long, .047" diameter Stainless Steel wire rope lanyard, ...
  4. Posi Lock 106 Manual Puller, 3 Jaws, 10 tons Capacity, 6" Reach, 1/4" - 7" Spread Range, 13-1/3" Ove...
  5. Posi Lock TJ-1 Transmission Bearing Puller, 2 Jaw, 9-1/4" Reach, 2-3/4" - 14-3/4" Spread Range
  6. Posi Lock HP-40 Large Hub Collar Adapter, 0 to 2” Hub Range, For Use With HP-1 and HP-2
  7. Posi Lock 204 Manual Puller, 2 Jaws, 2 tons Capacity, 4" Reach, 1/2" - 5" Spread Range, 10" Overall ...
  8. Posi Lock HP-70 Tip Reducer/Extender
  9. Posi Lock 208 Manual Puller, 2 Jaws, 12 tons Capacity, 8" Reach, 3/4" - 12" Spread Range, 16-1/4" Ov...
  10. Posi Lock 203 Manual Puller, 2 Jaws, 2 tons Capacity, 3" Reach, 1/4" - 4-1/4" Spread Range, 7" Overa...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.