Frontpage > Industrial > Industrial Tools > Chisels

Best Chisels - Buying Guide

Last Updated: 03/26/2019

Share on


  #1

Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set

Model: 16-150   |    Mpn: 16-150   |    Ean: 0043908499293   |    PartNumber: 16-150   |   Asin: B00002X1YO

STANLEY WOOD CHISEL SET CONTAIN 3 Piece Wood Chisel Set Contains 1/2 (12MM), 3/4 (18MM) & 1 (25MM) Chisels Features Full Size Shock Absorbing Handles With A No Roll Feature Durable Precision Ground Cutting Edges Heat Tempered Steel Blades Lacquer Coated To Resist Rust Bolster Blade Washer To Distribute Load Added For Strength Overall Length Of Chisels Is 7-3/4 (199MM) Carded

Features

  • Black polypropylene handle resists deformation. Includes: 16-153, 16-155, 16-157
  • Limited Lifetime Warranty
  • Heat tempered steel blades, lacquer-coated to prevent rust
  • Blades uniformly hardened for full length use
  • See more on Amazon...

Brand: Stanley   |   Manufacturer: Stanley

Item Dimensions: 1 x 6 x 10 inches (2.5 x 15.2 x 25.4 cm)   |   Package Dimensions: 1.73 x 5.67 x 9.72 inches (4.4 x 14.4 x 24.7 cm)

Amazon Price: $9.29 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99 | Used Price: $9.10

Warranty: Stanley warrants this product to the original purchaser for its useful life against deficiencies in material and workmanship. This LIMITED LIFETIME WARRANTY does not cover products that are improperly used, abused, altered or repaired. Deficient products will be replaced or repaired.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Astro 1600 16-Piece Punch and Chisel Set

Model: AST1600   |    Mpn: APT-1600   |    Ean: 6294571761475   |    PartNumber: APT-1600   |   Asin: B000LQLGHO

This kit is a complete punch and chisel solution. It is made of heat treated chrome vanadium steel. Includes storage pouch and chisel punch gauge. The product includes a storage pouch and chisel punch gauge. The kit includes the following: Punches - (5) Taper punches, (5) Pin punches, (2) Center punches. Chisels - (3) Clod chisels, (1) Chisel gauge and (1) Plastic storage tray. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Features

  • Taper Punch: 3/32-inchby5-1/4-inch, 1/8-inchby5-3/4-inch, 5/32-inchby6-inch, 3/16-inchby6-1/4-inch, 1/4-inchby6-3/4-inch
  • Cold Chisels: 3/8-inch by 5-1/2-inch, 1/2-inch by 6-inch, 5/8-inch by 6-1/2-inch
  • Pin Punch: 3/32-inch by 4-1/4-inch, 1/8-inch by 4-3/4-inch, 5/32-inch by 5-inch, 3/16-inch by 5-1/4-inch, 1/4-inch by 5-3/4-inch
  • Center Punch: 1/8-inch by 5-inch, 3/16-inch by 6-inch
  • Product material: CR-V and hardness: 54~58HRC
  • See more on Amazon...

Brand: Astro Pneumatic Tool   |   Manufacturer: Astro Pneumatic

Item Dimensions: 1.1 x 9.7 x 9 inches (2.8 x 24.6 x 22.9 cm)   |   Package Dimensions: 1.3 x 4.8 x 8.3 inches (3.3 x 12.2 x 21.1 cm)

Amazon Price: $16.41 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $28.93 | Used Price: $18.51

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Grip 28 pc Heavy Duty Punch & Chisel Set

Model: 61142   |    Mpn: 61142   |    Ean: 0097257611424   |    PartNumber: 61142   |   Asin: B0000AXBMU

This Grip punch and chisel set comes with 16-pc. chrome vanadium punch and chisel set, 5-pc. pin punches, 5-pc. taper punch, 3-pc. cold chisel, 2-pc. center punch and chisel punch gauge. Also comes with 12-pc. high carbon steel set, 6-pc. cold chisel set, 4-pc. pin punch set and 2-pc. center punch. Complete with roll-up vinyl storage pouch. Chisels (qty.): 9, Storage Type: Tool roll, Pieces (qty.): 28, Letters: 0, Punches (qty.): 18

Features

Brand: GRIP (GRAND RAPIDS INDUSTRIAL)   |   Manufacturer: GRIP (GRAND RAPIDS INDUSTRIAL PRODUCTS)

Item Dimensions: 1.5 x 5.25 x 17.5 inches (3.8 x 13.3 x 44.5 cm)   |   Package Dimensions: 1.6 x 5.3 x 17.4 inches (4.1 x 13.5 x 44.2 cm)

Amazon Price: $23.32 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $34.53 | Used Price: $22.01

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Flexcut Individual Knives

Asin: B074P7D7VD

This Cutting Knife from Flexcut is a great beginner's knife. Its more rounded point is extremely durable and its 1-1/4" blade bevel make it a perfect general purpose carving knife. If you want to start a collection of carving knives, the Cutting Knife from Flexcut is an excellent place to start. It is sure to become an indispensable part of even a master carver's tool kit. Features an ergonomic ash handle for prolonged periods of carving without fatigue and a razor-sharp high carbon steel blade.

Features

  • Ergonomic ash hardwood handle
  • Comfortable after hours of continued carving
  • Razor-sharp hard carbon steel blade is ready to use right out of the package
  • Made in the USA
  • See more on Amazon...

Brand: Flexcut   |   Manufacturer: FLEXCUT

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Stanley 16-298 3 Piece Cold Chisel Kit

Model: 16-298   |    Mpn: 16-298   |    Ean: 6757073835674   |    PartNumber: 16-298   |   Asin: B000NIFB94

PO16-298 Features: -Cutting edge is hardened to 52-58 HRC and is ground to a precise angle for efficient cutting and durability. -Striking edge hardened to 42 HRC and has chamfered edges to help resist chipping. -Size marking on shank allows for easy identification of the tool. -3 piece set contains one 16-286 - 3/8'' x 5-9/16'', one 16-287 - 1/2'' x 6'' and one 16-288 - 5/8'' x 6-3/4''. Product Type: -Chisels. Dimensions: Overall Length - Top to Bottom: -2.6 Inches. Overall Width - Side to Side: -0.9 Inches. Overall Depth - Front to Back: -9.3 Inches. Overall Product Weight: -0.76 Pounds.

Features

  • Accessible packaging enables the customer to easily evalulate products in store
  • Limited Lifetime Warranty
  • Stanley - Black & Decker
  • See more on Amazon...

Brand: Stanley   |   Manufacturer: Stanley

Item Dimensions: 0.91 x 2.64 x 9.25 inches (2.3 x 6.7 x 23.5 cm)   |   Package Dimensions: 1 x 7.9 x 9.2 inches (2.5 x 20.1 x 23.4 cm)

Amazon Price: $9.21 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $14.42 | Used Price: $9.65

Warranty: Stanley warrants this product to the original purchaser for its useful life against deficiencies in material and workmanship. This LIMITED LIFETIME WARRANTY does not cover products that are improperly used, abused, altered or repaired. Deficient products will be replaced or repaired.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Narex (Made in Czech Republic) 4 pc set 6mm (1/4"), 12 (1/2"), 20 (3/4") , 26 (1 1/16") mm Woodworking Chisels 863010

 Ean: 7241870678514   |    PartNumber: 863010   |   Asin: B00GPC74ZQ

These chisels are made by a small tool manufacturer in the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59. The blades take and hold an excellent edge. The blades are accurately ground and have a slimmer cross section that woodworkers prefer. As with all edge tool, they'll need sharpening before use. These chisels are an excellent value in a good quality tool. This is a 4 piece set contains the following sizes: 6 mm (1/4"), 12 mm (1/2"), 20 mm (13/16") and 26 mm (1 1/32"). They are ground at a 25 degree bevel. Blades are 4 3/4" to 5 1/2" long. Handles are lacquered European Beech are 5 1/2" long. Overall sizes range in length from 10 1/8" to 11". Blades have well-seated heavy steel tangs and handles have 2 ferrules to withstand vigorous mallet work. They come in a retail box.

Features

  • Made by a small tool manufacturer in the Czech Republic
  • Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59
  • Contains the following sizes: 6 mm (1/4), 12 mm (1/2), 20 mm (13/16) and 26 mm (1 1/32)
  • Bevel ground at a 25 degree bevel.
  • Handles made from laquered European Beechwood
  • See more on Amazon...

Brand: Narex   |   Manufacturer: Narex

Item Dimensions: 1.5 x 13.5 x 6.37 inches (3.8 x 34.3 x 16.2 cm)   |   Package Dimensions: 2.2 x 6.9 x 14 inches (5.6 x 17.5 x 35.6 cm)

Amazon Price: $39.99 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

VonHaus 10 pc Premium Craftsman Woodworking Wood Chisel Set with Honing Guide, Sharpening Stone and Wooden Storage Case

 Ean: 5060351496353   |    PartNumber: 15/085   |   Asin: B015Y15U2M

The VonHaus 10pc Chisel Set is just the job for cutting and shaping wood, and features a comprehensive range of tools ideal for tackling intricate and demanding jobs alike.

Each chisel features high quality chrome vanadium steel blades - heat treated for superior strength and durability. Narrow side bevels offer quick and precise flattening and sharpening.

All chisels also feature metal strike caps, making them suitable for use with a hammer.

Rubberised ergonomic grip handles offer comfortable use.

Set comprises:

- 1 x inch splitproof chisel

- 1 x 3/8 inch splitproof chisel

- 1 x inch spiltproof chisel

- 1 x inch splitproof chisel

- 1 x 1 inch splitproof chisel

- 1 x 1 inch splitproof chisel

- 1 x 38mm (1 inch) splitproof chisel

- 1 x 50mm (2 inch) splitproof chisel

- 1 x honing guide

- 1 x aluminum oxide sharpening stone (120/200 grit)

Supplied in a neat wooden storage case.

Features

  • SET INCLUDES: Set comprises 1 x " chisel, 1 x 3/8" chisel, 1 x " chisel, 1 x " chisel, 1 x 1" chisel, 1 x 1 " chisel, 1 x 1 " chisel, 1 x 2" chisel (6mm, 10mm, 13mm, 19mm, 25mm, 32mm, 38mm, 50mm) 1 x honing guide and 1 x aluminum oxide sharpening stone (120/200 grit).
  • HEAT TREATED: Heat-treated, chrome vanadium steel alloy blades with narrow side bevels
  • ERGONOMIC: Rubberised ergonomic grip handles with metal strike caps
  • WOODEN STORAGE CASE: Supplied in a professional, neat wooden storage case.
  • DOMESTIC and PROFESSIONAL USE: Splitproof chisels that are suitable for home woodworking and professional craftsman. CHISELS WILL NEED SHARPENING ON ARRIVAL.
  • See more on Amazon...

Brand: VonHaus   |   Manufacturer: DOMU Brands LLC

Item Dimensions: 2.99 x 6.06 x 6.5 inches (7.6 x 15.4 x 16.5 cm)   |   Package Dimensions: 3.31 x 15.75 x 16.54 inches (8.4 x 40.0 x 42.0 cm)

Amazon Price: $59.99 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $59.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Breynet Woodworker Square Hole Drill Bits Mortising Chisel Set,4pcs Woodworking Hole Saw Mortise Chisel Drill Bit Kit Tool Set 1/4" 2/5" 3/8" 1/2"

 Ean: 0764560276380   |   Asin: B079ZQF6TW

Clamping shank diameter: 19mm (Round)

Professional wood drill bit, suitable for construction, installation, renovation, decoration industry, etc.
The utility model in the hole drilled by the rotary body, while the impact of the use of hammer impact force transmitted to the outer,body the material crushing round hole and square head wall, a one-time processing of a square hole, and the dust can be broken slag discharged from the tube.

Note:

Square hole drill can not be used on an electric drill, drill square holes need to fit a square hole drill drilling (mortise and tenon machine) to use.

Features

  • Size: 1/4 Inch (6.35mm), 2/5 Inch (10mm), 3/8 Inch (9.5mm), 1/2 Inch (12.7mm)
  • Made of high-speed steel. Heat treatment, HRC48~50, high hardness, lengthened core, high concentricity.
  • Great for drilling square holes in wood with a mortising machine or a mortising attachment. Fits all mortising machines and drill press attachments. Square hole drill is mainly used for woodworking aspects.
  • It will get double effect by matched use with mortise and tenon machine.The square hole punching needs to use electric drill, hammer & other tools.
  • Reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs for construction, installation, renovation, decoration industries.
  • See more on Amazon...

Brand: Breynet   |   Manufacturer: Breynet

Package Dimensions: 1.73 x 5.47 x 9.57 inches (4.4 x 13.9 x 24.3 cm)

Amazon Price: $26.99 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $26.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Timber Tuff TMW-56 Lumber Cutting Guide

Model: TMW-56   |    Mpn: TMW-56   |    Ean: 0732393004746   |    PartNumber: TMW-56   |   Asin: B01CNRL6TQ

Timber Tuff's TMW-56 Lumber Cutting Guide makes it possible for you to cut your own lumber. This must-have tool is adjustable up to 2" x 6" boards, allowing you to cut your logs into clean lumber that you can use on a wide variety of different projects. This tool measures 8" x 2.5" x 8" overall, making it compact and easy to transport wherever you need it. Constructed of heavy-duty steel to withstand heavy use and wear. The durable powder-coat finish resists corrosion for a long-lasting product you can count on. Quickly and easily assemble the Lumber Cutting Guide to get to cutting your own lumber faster. Save money by being your own lumber mill and make use of your logs and wood with this Timber Tuff Lumber Cutting Guide.

Features

  • Adjustable to cut up to 2" x 6" boards; measures 8" x 8.25" x 2.75" high overall, making it easy to transport
  • Cut your own lumber and save yourself money with this must-have tool
  • Constructed of heavy-duty steel to withstand heavy use and wear
  • Durable powder-coat finish resists corrosion for a long-lasting product you can count on
  • Quick and easy assembly; 1 year limited Manufacturer's parts warranty
  • See more on Amazon...

Brand: Timber Tuff   |   Manufacturer: Timber Tuff

Item Dimensions: 2.75 x 8.25 x 8 inches (7.0 x 21.0 x 20.3 cm)   |   Package Dimensions: 3.4 x 8.3 x 8.7 inches (8.6 x 21.1 x 22.1 cm)

Amazon Price: $19.00 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $24.99 | Used Price: $18.35

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Hakko T18 Series Chisel Pack with T18-D08/D12/D24/D32/S3 Tips Model (Japan Import)

 Ean: 7466655982413   |    PartNumber: 43211-16103   |   Asin: B013WII72Y

Hakko T-18 Series Chisel Tips for the FX-8801/FX-888/900M/907/913 Irons. Pack of 5 different tips, one of each.

Features

  • T18-D08 - 0.8 x 14.5mm
  • T18-D12 - 1.2 x 14.5mm
  • T18-D24 - 2.4 x 14.5mm
  • T18-D32 - 3.2 x 14.5mm
  • T18-S3 - 5.2 x 18mm
  • See more on Amazon...

Brand: Hakko   |   Manufacturer: Hakko

Package Dimensions: 0.5 x 3.05 x 5.7 inches (1.3 x 7.7 x 14.5 cm)

Amazon Price: $28.49 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $28.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Narex Czech Steel Dual Bevel Carving Striking Marking Knife with Blade from Hardened Cr-Mn Steel Heat Treated to HRc 58 813800

Model: 813800   |    Mpn: 813800   |    Ean: 0700667465043   |    PartNumber: 813800   |   Asin: B017Z91D1S

This carving/marking knife is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality. Blade is made from highly allowed Cr-Mn steel and heat treated to HRc 58. Handle is of European Beech with an octagonal cross section and 4.125" long. Blade is .090" thick and .380" wide and 2.75" long. Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side, Knife comes super sharp and ready for use. This knife an excellent value for a good quality tool.

Features

  • Marking/carving knife is manufactured by small and highly respected tool maker in Czech Republic.
  • Blade made from highly allowed Cr-Mn steel and heat treated to HRc 58
  • Blade is .090 thick and .380 wide
  • Single bevel sharpened ground at 25 degrees and dual bevels sharpened at 5 degrees on each side
  • Blade length is 2.75 long and handle is 4.125 long
  • See more on Amazon...

Brand: Narex   |   Manufacturer: Narex

Package Dimensions: 1.7 x 1.7 x 7.8 inches (4.3 x 4.3 x 19.8 cm)

Amazon Price: $18.99 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Flexcut Radius Knife, with Curved Bevel and High Carbon Blade (KN36)

Model: SS-BRK-FLEXKN36   |    Mpn: KN36   |    Ean: 0651646500364   |    PartNumber: KN36   |   Asin: B00FG5L3NW

This Flexcut Radius Knife has a curved bevel and blade for making push cuts, slice cuts and v-shaped cuts. The skewed curvature of the bevel allows for a rolling action and allows for a different approach. The high carbon blade holds an edge extremely well and is easily maintained by simple stropping. The blade is honed, polished and ready to go. New handle shape holds like a pencil or conventional knife.

Features

  • High Carbon Steel blades
  • Ergonomic curved Ash Handle
  • Flexible blades
  • Pre-sharpened and razor Sharp
  • Made in USA
  • See more on Amazon...

Brand: Flexcut   |   Manufacturer: FLEXCUT

Item Dimensions: 5 x 5 x 5 inches (12.7 x 12.7 x 12.7 cm)   |   Package Dimensions: 1.3 x 3.4 x 8.4 inches (3.3 x 8.6 x 21.3 cm)

Amazon Price: $20.84 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $20.84

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

VonHaus 8 pc Craftsman Woodworking Wood Chisel Set for Carving with Honing Guide, Sharpening Stone and Storage Case

 Ean: 5060351496360   |    PartNumber: 15/086   |   Asin: B014DT8KYG

The VonHaus 8 Piece Chisel Set is perfect for a range of woodworking tasks around the home or workshop, making it a fantastic addition to any toolbox.



Each chisel features a high quality, precision ground chrome vanadium steel alloy blades - heat treated for strength and durability while wood carving. Narrow side bevels allow for quick and precise flattening and sharpening.



Ergonomic handles for improved grip and control.



Set comprises:



1 x 1/4" chisel

1 x 1/2" chisel

1 x 13/16" chisel

1 x 1" chisel

1 x 1-1/4" chisel

1 x 1-1/2" chisel

1 x honing guide

1 x aluminum oxide sharpening stone (120/200 grit)



Supplied in a blow molded plastic storage case.

Features

  • SET INCLUDES: 6x chisels 1/4", 1/2", 3/4", 1", 1-1/4", 1-1/2" (6mm, 13mm, 19mm, 25mm, 32mm, 38mm) 1x honing guide & 1x sharpening stone (120/200 grit)
  • HEAT TREATED: Heat-treated, chrome vanadium steel alloy blades with narrow side bevels
  • ERGONOMIC DESIGN: Ergonomically designed handles for improved comfort and control
  • STORAGE CASE: Supplied in a blow molded plastic storage case
  • DOMESTIC and PROFESSIONAL USE: Suitable for home woodworking and professional craftsman
  • See more on Amazon...

Brand: VonHaus   |   Manufacturer: DOMU Brands LLC

Package Dimensions: 3.9 x 10.2 x 12.3 inches (9.9 x 25.9 x 31.2 cm)

Amazon Price: $39.95 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $39.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

WORKPRO 3-piece Wood Chisel Set, Cr-V Construction, Bi-Material Soft Grip with Hammer End for Woodworking, Carving

Model: W001801A   |    Mpn: W001801A   |    Ean: 0820909723837   |    PartNumber: W001801A   |   Asin: B015SWYCEE

These WORKPRO general-purpose bench chisels feature durable Chrome vanadium blades and Bi-material handles that stand up to hammer and mallet blows, 3 different standard blade widths with helpful etched markings displaying size. A sharp wood chisel can cut mortises, shave rough surfaces, chop out corners and scrape off glue. The wood chisel is an indispensable member of your tool set.

Features

  • Drop forged chrome-vanadium steel blade for durability and heat treated for edge retention;
  • Bevel Edge for woodworking carving multi-purpose use, suitable for all soft wood, hard wood and laminated wood products
  • Steel butt designed for heavy pounding with a hammer or mallet;
  • Comes with sizes: 1/2'', 3/4'', 1'', full length blade guard for added safety;
  • Ergonomic bi-material handle for great comfort and firm control, Guarantee - 1 year
  • See more on Amazon...

Brand: WORKPRO   |   Manufacturer: HANGZHOU GREATSTAR INDUSTRIAL CO.,LTD.

Item Dimensions: 2 x 6 x 12 inches (5.1 x 15.2 x 30.5 cm)   |   Package Dimensions: 2 x 6 x 12 inches (5.1 x 15.2 x 30.5 cm)

Amazon Price: $13.49 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $13.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Advanced Tool Design Model ATD-5730 9 Piece All Purpose Chisel Set

Model: ATD-5730   |    Mpn: ATD-5730   |    Ean: 0663126057305   |    PartNumber: ATD-5730   |   Asin: B000OUX9V8

Made from the best shock-resisting alloy steel available. Designed to fit all popular air hammers with a standard .401 shank. Contains one each: ATD-5700 Double Blade Panel Cutter, ATD-5702 Sheet Metal Trimmer, ATD-5703 Spot Weld Breaker, ATD-5704 Straight Panel Cutter, ATD-5709 3/4" Cold Chisel, ATD-5711 Scraper, ATD-5712 Tapered Punch, ATD-5713 7" Chisel Blank, and ATD-5714 1-1/4" Smoothing Hammer in tray.

Features

Brand: ATD   |   Manufacturer: ATD

Item Dimensions: 6 x 12 x 24 inches (15.2 x 30.5 x 61.0 cm)   |   Package Dimensions: 0.5 x 10.5 x 13.1 inches (1.3 x 26.7 x 33.3 cm)

Amazon Price: $23.92 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 4-5 business days
List Price: $23.92 | Used Price: $28.89

Warranty: One Year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Bosch HS1910 Scaling Chisel 3-Inch by 12 Inch SDS max

Model: HS1910   |    Mpn: HS1910   |    Ean: 7294204774284   |    PartNumber: HS1910   |   Asin: B0009H5NKQ

Bosch offers a full assortment of hammer steel points and chisels. Bosch brings innovation to concrete and masonry drilling with increased efficiency and higher durability. All Bosch chisels are manufactured with a proprietary heat-treat process.

Features

  • VERSATILE: For light chipping and chiseling of tile, mortar, glazing compounds and other masonry products; Ideal for removing large quantities of material.
  • DESIGN: Wide chisel design for quick and easy chiseling and breaking.
  • COMPATIBLE: Works with every SDS-max hammer.
  • See more on Amazon...

Brand: Bosch   |   Manufacturer: Bosch

Item Dimensions: 0.75 x 3 x 15.5 inches (1.9 x 7.6 x 39.4 cm)   |   Package Dimensions: 1.85 x 4.37 x 15.75 inches (4.7 x 11.1 x 40.0 cm)

Amazon Price: $23.47 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $24.32

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Narex Thin Blade Dual Double Bevel Striking Marking Knife with Blade from Hardened Mn-V Steel Heat Treated to HRc 61 822302

Model: 822302   |    Mpn: 822302   |    Ean: 0791617733114   |    PartNumber: 822302   |   Asin: B01N2XVTXM

This marking/striking knife is made by a small and highly respected tool manufacturer in the Czech Republic and is of exceptional quality. Blade is made from Mn-V steel and heat treated to HRc 61. Handle is of European Hornbeam with a solid brass ferrule. Blade is .055" thick, .410" wide and 1.5" long. Double bevel sharpened at 20 degrees and tip ground to 55 degrees. Knife comes super sharp and ready for use. This knife an excellent value for a good quality tool.

Features

  • Marking/striking knife is manufactured by small and highly respected edge tool maker in Czech Republic
  • Blade made from highly allowed Mn-V steel and heat treated to HRc 61
  • Blade is .055 thick and .410 wide
  • Double bevel sharpened at 20 degrees and tip ground to 55 degrees.
  • Blade length is 1.5 long and handle is 5.25 long, overall length is 6.75
  • See more on Amazon...

Brand: Narex   |   Manufacturer: Narex

Package Dimensions: 1.81 x 1.81 x 7.76 inches (4.6 x 4.6 x 19.7 cm)

Amazon Price: $19.99 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

VonHaus 16pc Wood Carving Knife Tool Set with Gouge Chisels, Sharpening Stone and Mallet - Beginner Woodworking Chisels

 Ean: 5056115706790   |    PartNumber: 9100020   |   Asin: B07B7N6YHL

VonHaus 16Pc Chisel Set

The VonHaus 16Pc Chisel Set is your complete introductory set for cutting and shaping wood. It features all the essentials needed to tackle intricate and demanding jobs.

Each chisel features high quality chrome vanadium steel blades - heat treated for superior strength and durability.

Narrow side bevels offer quick and precise flattening and sharpening.

Set Comprises:

5 x 5" Short Palm Wood Knives 7 x 8.4" Long Shaft Carving Tools 2 x 6" Files 1 x Sharpening Stone 1 x Mallet

Easy Grip

Easy grip octagonal wood handles give you total control for all types of cutting and shaping.

Use tools together with the mallet included for added impact - great for making particularly deep cuts.

Black Canvas Case

Black Canvas Case features elastic holders and elasticated top pockets. With a space for every tool, you'll always be able to find exactly what you need at a glance.

Keep all your tools neat and tidy - great for easy storage.

Features

  • STARTER SET: For novice wood sculptors or carpenters, set includes 5 x Short Palm Wood Knives 7 x Long Shaft Carving Tools 2 x Files 1 x Sharpening Stone 1 x Mallet
  • SAFE STORAGE: Black canvas carry case has individual elastic holders and pockets to keep tools neat, organised and safe for transportation
  • HEAT TREATED: Made from heat-treated, chrome vanadium steel alloy blades with a ground finish and narrow side bevels
  • PRECISION: Comes with a sharpening stone and mallet for precise performance. Chisels will need sharpening to maintain their accuracy
  • WOODEN HANDLES: Easy grip octagonal wood handles for superior handling
  • See more on Amazon...

Brand: VonHaus   |   Manufacturer: DOMU Brands LLC

Package Dimensions: 4.41 x 4.96 x 13.03 inches (11.2 x 12.6 x 33.1 cm)

Amazon Price: $39.95 | as of 03/26/2019(10:14am pst)
Availibility: Usually ships in 24 hours
List Price: $39.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set
  2. Astro 1600 16-Piece Punch and Chisel Set
  3. Grip 28 pc Heavy Duty Punch & Chisel Set
  4. Flexcut Individual Knives
  5. Stanley 16-298 3 Piece Cold Chisel Kit
  6. Narex (Made in Czech Republic) 4 pc set 6mm (1/4"), 12 (1/2"), 20 (3/4") , 26 (1 1/16") mm Woodworki...
  7. VonHaus 10 pc Premium Craftsman Woodworking Wood Chisel Set with Honing Guide, Sharpening Stone and ...
  8. Breynet Woodworker Square Hole Drill Bits Mortising Chisel Set,4pcs Woodworking Hole Saw Mortise Chi...

Most Wished For

  1. Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set
  2. Astro 1600 16-Piece Punch and Chisel Set
  3. Grip 28 pc Heavy Duty Punch & Chisel Set
  4. Flexcut Individual Knives
  5. Stanley 16-298 3 Piece Cold Chisel Kit
  6. Narex (Made in Czech Republic) 4 pc set 6mm (1/4"), 12 (1/2"), 20 (3/4") , 26 (1 1/16") mm Woodworki...
  7. VonHaus 10 pc Premium Craftsman Woodworking Wood Chisel Set with Honing Guide, Sharpening Stone and ...
  8. Breynet Woodworker Square Hole Drill Bits Mortising Chisel Set,4pcs Woodworking Hole Saw Mortise Chi...

Most Gifted

  1. Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set
  2. Astro 1600 16-Piece Punch and Chisel Set
  3. Grip 28 pc Heavy Duty Punch & Chisel Set
  4. Flexcut Individual Knives
  5. Stanley 16-298 3 Piece Cold Chisel Kit
  6. Narex (Made in Czech Republic) 4 pc set 6mm (1/4"), 12 (1/2"), 20 (3/4") , 26 (1 1/16") mm Woodworki...
  7. VonHaus 10 pc Premium Craftsman Woodworking Wood Chisel Set with Honing Guide, Sharpening Stone and ...
  8. Breynet Woodworker Square Hole Drill Bits Mortising Chisel Set,4pcs Woodworking Hole Saw Mortise Chi...

Top Selling

  1. Stanley 16-150 150 Series Short Blade 3-Piece Wood Chisel Set
  2. Astro 1600 16-Piece Punch and Chisel Set
  3. Grip 28 pc Heavy Duty Punch & Chisel Set
  4. Flexcut Individual Knives
  5. Stanley 16-298 3 Piece Cold Chisel Kit
  6. Narex (Made in Czech Republic) 4 pc set 6mm (1/4"), 12 (1/2"), 20 (3/4") , 26 (1 1/16") mm Woodworki...
  7. VonHaus 10 pc Premium Craftsman Woodworking Wood Chisel Set with Honing Guide, Sharpening Stone and ...
  8. Breynet Woodworker Square Hole Drill Bits Mortising Chisel Set,4pcs Woodworking Hole Saw Mortise Chi...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.