Frontpage > Industrial > Industrial Tools > Tube Cutters

Best Tube Cutters - Buying Guide

Last Updated: 11/21/2018

Share on

Bestselling Tube Cutters on Amazon

  1. RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter
  2. RIDGID 32975 Model 103 Close Quarters Tubing Cutter, 1/8-inch to 5/8-inch Tube Cutter
  3. RIDGID 31632 Model 151 Quick-Acting Tubing Cutter, 1/4-inch to 1-7/8-inch Tube Cutter
  4. RIDGID 32985 Model 104 Close Quarters Tubing Cutter, 3/16-inch to 15/16-inch Tube Cutter
  5. GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch
  6. RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel, Pipe Cutter Wheel
  7. Gunpla PVC Pipe and Plastic Tubing Cutter for Cutting up to 1-5/8inch/42mm OD Tubing
  8. SharkBite PEX Tubing Cutter, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 Inch Tube Cutter, U701A
  9. RIDGID 118 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle, 1/4-inch to 1-1/8-inch T...
  10. RIDGID 29963 Model 35S Stainless Steel Tubing Cutter, 1/4-inch to 1-3/8-inch Tube Cutter

  #1

RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter

Model: 40617   |    Mpn: 40617   |    Ean: 0095691406170   |    PartNumber: 40617   |   Asin: B001P307PO

A handy tool for working in tight and cramped spaces, the RIDGID 40617 Close Quarters Tubing Cutter is a must have for any plumber's toolbox. This tube cutter is specially designed for use in restricted spaces on small diameter tubing. Rollers feature grooves for close-to-flare cuts. Constructed for durability and ease of use, it has strong yet lightweight slide and wheel housing and a large knurled feed screw knob that produces clean cuts through easy control of cutting pressure.

The metal tube cutter includes a spare cutter wheel in the knob for maximum uptime.

This RIDGID tubing cutter has a 1/4-inch to 1-1/8-inch cutting capacity and effectively cuts hard and soft copper, aluminum, brass and plastic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

  • Designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing
  • Strong, lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts
  • Rollers include grooves for close-to-flare cuts
  • Tubing cutter has a 1/4-inch to 1-1/8-inch (6 mm to 28 mm) cutting capacity
  • Includes spare cutter wheel in knob
  • See more on Amazon...

Brand: Ridgid   |   Manufacturer: Ridgid Tool Company

Item Dimensions: 5 x 4.5 x 7.5 inches (12.7 x 11.4 x 19.1 cm)   |   Package Dimensions: 1.54 x 5 x 6.5 inches (3.9 x 12.7 x 16.5 cm)

Amazon Price: $19.98 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $31.99 | Used Price: $19.58

Warranty: Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

RIDGID 32975 Model 103 Close Quarters Tubing Cutter, 1/8-inch to 5/8-inch Tube Cutter

Model: 32975   |    Mpn: 32975   |    Ean: 0095691329752   |    PartNumber: 32975   |   Asin: B000LDGNCU

Specifically designed for use in restricted spaces on small diameter tubing, the RIDGID Close Quarters Tubing Cutter makes tight cutting jobs easier. Built for durability and ease of use, the metal tube cutter features a strong, lightweight slide and wheel housing and large knurled feed screw knob that produce clean cuts by providing easy control of cutting pressure.

This copper tubing cutter has an 1/8-inch to 5/8-inch cutting capacity and effectively cuts hard and soft copper, aluminum, brass and plastic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

  • Cuts hard and soft copper, aluminum, brass and plastic tubing
  • Specifically designed for use in restricted spaces on small diameter tubing
  • Strong, lightweight slide and wheel housing and large knurled feed screw knob provide easy control of cutting pressure for clean cuts
  • Tubing cutter has a 1/8-inch to 5/8-inch (3 mm to 16 mm) cutting capacity
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
  • See more on Amazon...

Brand: Ridgid   |   Manufacturer: Ridgid Tool Company

Item Dimensions: 3.94 x 3.94 x 5.91 inches (10.0 x 10.0 x 15.0 cm)   |   Package Dimensions: 1.2 x 4.8 x 6.1 inches (3.0 x 12.2 x 15.5 cm)

Amazon Price: $12.19 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $13.85 | Used Price: $11.34

Warranty: Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

RIDGID 31632 Model 151 Quick-Acting Tubing Cutter, 1/4-inch to 1-7/8-inch Tube Cutter

Model: 31632   |    Mpn: 31632   |    Ean: 0640024962924   |    PartNumber: 31632   |   Asin: B001ASBGPY

The RIDGID 31632 Quick-Acting Tubing Cutter delivers fast and clean cuts every time. For enhanced productivity, the tube cutter has a large, ergonomic X-CEL knob that provides a firmer grip so you can cut tubing quickly and easily, and an X-CEL ball detent wheel pin that allows for quick, tool-free cutter wheel changes in seconds, with no lost clips.

Built to last, the metal tube cutter features sturdy I-beam construction and hardened wear surfaces for durability. It has thrust bearing slide assemblies for smooth operation, and a convenient fold-away reamer.

The tubing cutter has a 1/4-inch to 1-7/8-inch cutting capacity and is available in models for cutting plastic pipe or metallic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

  • X-CEL knob for cutting tubing more quickly and easily with a larger, more ergonomic design
  • Quick-acting design, I-beam construction and hardened wear surfaces for reliable durability. Thrust-bearing slide assemblies for smooth operation
  • Features a convenient fold-away reamer to clean and insure a better connection
  • X-CEL wheel pin with ball detent designs allows you to change the cutter wheel quickly with no tool needed and no lost clips
  • Tubing cutter has a 1/4-inch to 1-7/8-inch (6 mm to 42 mm) cutting capacity
  • See more on Amazon...

Brand: Ridgid   |   Manufacturer: Ridgid Tool Company

Item Dimensions: 9 x 5 x 1.9 inches (22.9 x 12.7 x 4.8 cm)   |   Package Dimensions: 1.9 x 5 x 9 inches (4.8 x 12.7 x 22.9 cm)

Amazon Price: $39.39 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $39.90 | Used Price: $36.63

Warranty: Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

RIDGID 32985 Model 104 Close Quarters Tubing Cutter, 3/16-inch to 15/16-inch Tube Cutter

Model: 32985   |    Mpn: 32985   |    Ean: 0095691329851   |    PartNumber: 32985   |   Asin: B000WT6U8U

Specially designed for use in restricted spaces on small diameter tubing, the RIDGID 32985 Close Quarters Tubing Cutter makes tight cutting jobs more manageable. Constructed for durability and ease of use, the metal tube cutter features a strong yet lightweight slide and wheel housing and a large knurled feed screw knob that results in clean cuts by ensuring easy control of cutting pressure.

This copper tubing cutter has a 3/16-inch to 15/16-inch cutting capacity and effectively cuts hard and soft copper, aluminum, brass and plastic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

  • Cuts hard and soft copper, aluminum, brass and plastic tubing
  • Specifically designed for use on small diameter tubing in restricted spaces
  • Strong, lightweight slide and wheel housing and large knurled feed screw knob allow easy control of cutting pressure for clean cuts
  • Tubing cutter has a 3/16-inch to 15/16-inch (5 mm to 24 mm) cutting capacity
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
  • See more on Amazon...

Brand: Ridgid   |   Manufacturer: Ridgid Tool Company

Item Dimensions: 3.94 x 3.94 x 5.91 inches (10.0 x 10.0 x 15.0 cm)   |   Package Dimensions: 1 x 4.9 x 6.9 inches (2.5 x 12.4 x 17.5 cm)

Amazon Price: $13.95 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $16.15 | Used Price: $11.20

Warranty: Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch

 Ean: 7131405533114   |    PartNumber: GOCHANGEBGXx8hlYE   |   Asin: B01AYUVCX4

Features:
1.Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing
2.Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts
3.Perfect tool for cutting tubes or pipes made of copper, brass, PVC, or aluminum, plastic and more.
4.Essential cutting tool for your home handy man, plumbers, electricians, and vehicle mechanics.
5.Small size for use in tight spaces

Specifications:
Cutting capacity: 3-22 mm

Package Included:
1 x Mini Pipe Tube Cutter

Features

  • MAKING TUBE CUTTING EASY: Quick and easy way to get clean rounded cuts on tubing from 0.12" - 0.87" outer diameter in tight areas and close quarters with GOCHANGE Tube Cutter
  • ESSENTIAL TUBE CUTTER: This is a must have tool for all handy men, especially plumbers, electricians, mechanics, HVAC service men and for DIY enthusiasts who need to cut pipes and tubing for their projects. Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing
  • STRONG AND LIGHTWEIGHT: GOCHANGE Mini Tube Cutter is small but strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts
  • CLEAN CUTS: Solid ergonomic feel and consistent tracking make cutting tubes a very comfortable and quick task. Bottom rotating wheel adjusts the cutter to the proper fit in a seamless smooth movement
  • ONE YEAR WARRANTY & 24 HOURS OF CUSTOMERS SERVICE: Safe and Durable with strict quality testing. We offer 100% risk-free satisfaction guarantee and 1 year warranty. If you still have questions after your purchase, Please contact us by e-mail. we will help you to solve problems within 24 hours.
  • See more on Amazon...

Brand: GOCHANGE   |   Manufacturer: GOCHANGE

Item Dimensions: 0.79 x 1.57 x 2.17 inches (2.0 x 4.0 x 5.5 cm)   |   Package Dimensions: 0.6 x 2.4 x 4.2 inches (1.5 x 6.1 x 10.7 cm)

Amazon Price: $7.99 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $19.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel, Pipe Cutter Wheel

Model: 41317   |    Mpn: 41317   |    Ean: 0095691413178   |    PartNumber: 41317   |   Asin: B000GASHJU

For use with several models of RIDGID Tubing Cutters, the RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel offers exceptional cutting performance. Designed for ease of use, this pipe cutter wheel cuts aluminum and copper tubing quickly and easily. The precision-machined cutter wheel is made from high-grade steel for superior durability and engineered for long life and maximum cutting accuracy. This blister pack includes 2 replacement wheels.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

  • Includes 2 replacement wheels
  • Fits models 101, 103, 104, 117, 118, 150, 151, 152, 153, and 205 RIDGID Tubing Cutters
  • Precision-machined cutting wheel is made from high-grade steel for superior durability
  • Replacement pipe cutter wheel for aluminum and copper tubing
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
  • See more on Amazon...

Brand: Ridgid   |   Manufacturer: Ridgid Tool Company

Item Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)   |   Package Dimensions: 1.3 x 3.8 x 6.3 inches (3.3 x 9.7 x 16.0 cm)

Amazon Price: $9.77 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $12.65

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Gunpla PVC Pipe and Plastic Tubing Cutter for Cutting up to 1-5/8inch/42mm OD Tubing

 Ean: 0607353653565   |   Asin: B079FGP4CB

Gunpla PVC cutter features:
spring-loaded handles for faster positioning and a hardened steel blade that delivers fast, single stroke cuts with no ratcheting or twisting.
Built to last, the tube cutter features durable aluminum construction suited to heavy-duty use, along with easily replaceable cutting blades.

Wide Application: Gunpla PVC cutter has a 1/8 in. to 1-5/8 in. O.D capacity and is suitable for cutting plastic (PVC, CPVC, PP, PEX, PE). Note: This single stroke cutter is suitable for cutting multilayer tubing but not metallic tubing.
Gunpla PVC cutter is a must have essential tool if you are a handy man, plumbers, electricians, or vehicle mechanics.
Cutting capacity is less than 1-1/4" outer diameter.

Specification
Gunpla PVC /Tubing Cutter for Cutting up to 1-5/8inch/42mm.
Gunpla PVC /Tubing Cutter's blade is heat-treated to aim to be more sharp, durable and anti-rusting. It is 2.5mm thick.

Features

  • BEST QUALITY in the market: Gunpla Single Stroke PVC and Tubing Cutter is constructed from steel to ensure added strength. Blade is as thick as 2.5mm. Built to last, the tube cutter features durable aluminum construction suited to heavy-duty use, along with easily replaceable cutting blades.
  • WHERE TO APPLY: Our cuter cuts up to 1-5/8/42mm OD tubing. Ideal For PVC, CPVC, PEX, polybutylene, polyethylene, rubber hose, and most non-metallic tubing.
  • DESIGN: Replaceable, hardened- 65MN steel cutting blade makes burr-free cuts. It provides a precision-ground cutting edge.
  • EASY TO OPERATE: Tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip. Spring-loaded handles allow for faster positioning of easy, single stroke cuts.
  • SERVICE & SUPPORT: Atlanta, GA based service team makes you worry free after purchasing. Our product comes with a 3-year warranty against material defects and workmanship. We promise full refund if you are not satisfied with our products. No questions asked!
  • See more on Amazon...

Brand: Gunpla   |   Manufacturer: Gunpla

Package Dimensions: 0.8 x 4.7 x 9.9 inches (2.0 x 11.9 x 25.1 cm)

Amazon Price: $12.95 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $21.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

SharkBite PEX Tubing Cutter, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 Inch Tube Cutter, U701A

Model: U701   |    Mpn: U701   |    Ean: 7241871131544   |    PartNumber: U701   |   Asin: B00A8HV16C

SharkBite PEX Tubing Cutter

For clean, straight cuts, use with 1/4 , 3/8 , 1/2 , 3/4 and 1 SharkBite PEX tubing. Place PEX tubing inside cutter. Squeeze PEX Cutter Tool on PEX tube and tool easily adjusts to PEX tube dimensions. Push handles together until it you hear the click and you re done.

CUT. PUSH. DONE. The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.

Connect pipe in seconds with relative ease using any SharkBite Push-To-Connect fitting. No soldering, clamps, glue required. It's as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring. The Shark Bite PEX tubing cutters are an integral tool in the easy-to-install SharkBite Connection System.

Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no-fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.

SHARKBITE SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.

Features

  • CUTS IN SECONDS: For clean, straight cuts PEX Tubing Cutters are an integral tool in the easy-to-install SharkBite Connection System.
  • PEX TUBING: For clean, straight cuts, use with 1/4 Inch, 3/8 Inch, 1/2 Inch, 3/4 Inch and 1 Inch SharkBite PEX tubing
  • COMPATIBLE PRODUCT: Same as part number U701Z and U701A
  • QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 F and can be reused up to four times
  • See more on Amazon...

Brand: SharkBite   |   Manufacturer: Cash Acme

Item Dimensions: 0.75 x 6 x 11 inches (1.9 x 15.2 x 27.9 cm)   |   Package Dimensions: 1 x 4.1 x 10 inches (2.5 x 10.4 x 25.4 cm)

Amazon Price: $8.98 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $13.29

Warranty: 2 year limited warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

RIDGID 118 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle, 1/4-inch to 1-1/8-inch Tubing Cutter

Model: 32573   |    Mpn: 32573   |    Ean: 0095691325730   |    PartNumber: 32573   |   Asin: B003IEPCXA

The RIDGID 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle is designed for easier cutting of hard and soft copper, aluminum and brass in tight, restricted spaces where the cutter cannot be rotated by hand. With its 2-in-1 design, the tubing cutter can be used alone or with the ratchet handle, a light and ergonomic accessory that offers greater flexibility and mobility when cutting. The rugged, compact handle attaches to the cutter and operates in ratchet steps as small as 10 degrees, allowing for fine indexing in tight spaces. The easy-to-turn football-shaped knob only needs tightening once and the spring-loaded cutter wheel automatically cuts, for ease of use in hard-to-reach areas. Close quarters tubing cutter has an adjustable 1/4-inch to 1-1/8-inch (6 mm to 28 mm) outside diameter capacity. This tubing cutter includes a spare E-3469 Cutter Wheel in the knob. Ratchet handle is also compatible with the model 101 tubing cutter and E-1740 soft flexible plastic cutter wheel. RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength, and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

  • Featuring a 2-in-1 design, the tube cutter can be used alone or with the attachable, light and ergonomic ratchet handle
  • Designed to cut hard and soft copper, aluminum and brass
  • Rugged and compact ratchet handle attaches to cutter for easier cutting in tight, restricted spaces; handle can be operated in ratchet steps as small as 10 degrees
  • Cutter is easy to use in hard-to-reach areas because the knob only needs to be tightened once
  • Tubing bender has an adjustable 1/4-inch to 1-1/8-inch (6 mm to 28 mm) outside diameter capacity
  • See more on Amazon...

Brand: Ridgid   |   Manufacturer: Ridgid

Item Dimensions: 2 x 6.75 x 13 inches (5.1 x 17.1 x 33.0 cm)   |   Package Dimensions: 2.36 x 6.89 x 12.99 inches (6.0 x 17.5 x 33.0 cm)

Amazon Price: $28.59 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $33.90 | Used Price: $26.59

Warranty: RIDGID branded tools are known the world over as best-in-class tools that allow the end-user to complete jobs more quickly and reliably. However, there's added peace of mind with the RIDGID Full Lifetime Warranty. Should your tool ever malfunction from defects in workmanship or materials, we will repair or replace the tool free of charge. RIDGID tools are warranted to be free of material and workmanship defects. This warranty lasts for the lifetime of the RIDGID tool. Warranty coverage ends when the product becomes unusable for reasons other than defects in workmanship or material. To obtain the benefit of this warranty, deliver the complete product via prepaid transportation to Ridge Tool Company, Elyria, Ohio, or any authorized RIDGID Independent Service Center. Pipe wrenches and other hand tools should be returned to the place of purchase. Warranted products will be repaired or replaced, at Ridge Tool's option, and returned at no charge; or, if after three attempts to repair or replace during the warranty period the product is still defective, you can elect to receive a full refund of your purchase price. Failures due to misuse, abuse or normal wear and tear are not covered by this warranty. Ridge Tool shall not be responsible for any incidental or consequential damages. Some areas do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary, from state to state, province to province, or country to country. This Full Lifetime Warranty is the sole and exclusive warranty for RIDGID products.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

RIDGID 29963 Model 35S Stainless Steel Tubing Cutter, 1/4-inch to 1-3/8-inch Tube Cutter

Model: 29963   |    Mpn: 29963   |    Ean: 0956912996354   |    PartNumber: 29963   |   Asin: B001P81OK6

Designed for optimal performance, the RIDGID 29963 Stainless Steel Tubing Cutter quickly and easily cuts stainless steel tube to the length you need. Featuring an innovative design, the tube cutter has 6 individual bearings that replace traditional rollers. These bearings create a smoother cut and allow for increased speed around the tube. Also, helping deliver a smoother cut, the specially designed stainless steel cutter wheel contains bearings in the hub, decreasing drag around the tube.

The tubing cutter has a contoured frame that allows for easy alignment while adjusting the cutter to make a cut, and it is equipped with an ergonomic knob for easy adjustments. Built for maximum performance, the cutter now includes an X-CEL knob design for quicker cutting.

This steel tube cutter has a 1/4-inch to 1-3/8-inch cutting capacity.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

  • 6 individual bearings replace traditional rollers, creating a smoother cut and allowing for increased speed around the tube
  • Contoured frame allows for easy alignment while adjusting the cutter to make a cut
  • Features a specially designed stainless steel cutter wheel that contains bearings in the hub, decreasing drag around the tube for a smoother cut
  • Ergonomic knob allows for easy adjustments
  • Steel tube cutter has a 1/4-inch to 1-3/8-inch (6 mm to 35 mm) cutting capacity
  • See more on Amazon...

Brand: Ridgid   |   Manufacturer: Ridgid Tool Company

Item Dimensions: 11.8 x 3.9 x 3.9 inches (30.0 x 9.9 x 9.9 cm)   |   Package Dimensions: 1.9 x 5.8 x 10.7 inches (4.8 x 14.7 x 27.2 cm)

Amazon Price: $38.90 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $39.42

Warranty: Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

RIDGID 23498 Model RC-1625 Ratcheting Plastic Pipe and Tubing Cutter, 1/8-inch to 1-5/8-inch Pipe Cutter

Model: 23498   |    Mpn: 23498   |    Ean: 0095691234988   |    PartNumber: 23498   |   Asin: B001HWQAI6

A valuable addition to any toolbox, the RIDGID 23498 Ratcheting Plastic Pipe and Tubing Cutter easily cuts plastic and multilayer tubing to the length you need. The pipe cutter has an X-CEL quick change blade design for tool-free blade changes in seconds, without any lost clips or misplaced screws.

This advanced blade design combined with the ratcheting mechanism reduces the amount of hand force needed to cut through hard plastic material. Thus, the "burr-less" cutting operation provides a square cut with less effort.

Handy ergonomic grips on the bottom handle are spaced at 1 2-inch increments to act as a quick pipe measuring scale. Built to last, the ratcheting tubing cutter is constructed in durable aluminum, suitable for heavy-duty use and has easily replaceable cutting blades.

This versatile pipe cutter has an 1/8-inch to 1-5/8-inch O.D. capacity and is suitable for use with plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing. The RC-1625 makes an ideal pvc pipe cutter.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

  • Designed for cutting plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing
  • Features an easily replaceable X-CEL quick change blade
  • Burr-less cutting operation provides a square cut with less effort
  • Ergonomic grips on bottom handle spaced at 1/2-inch increments, acting as a quick pipe measuring scale
  • Tubing cutter has a 1/8-inch to 1-5/8-inch (3 mm to 42 mm) outer diameter capacity
  • See more on Amazon...

Brand: Ridgid   |   Manufacturer: Ridgid Tool Company

Item Dimensions: 1.25 x 6.75 x 13.5 inches (3.2 x 17.1 x 34.3 cm)   |   Package Dimensions: 1.6 x 6.5 x 13.1 inches (4.1 x 16.5 x 33.3 cm)

Amazon Price: $52.78 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $57.15

Warranty: Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Performance Tool W702C Tubing Cutter,

Model: W702C   |    Mpn: W702C   |    Ean: 0395641071466   |    PartNumber: W702C   |   Asin: B0002KO2FW

Performance Tool W702C Cuts copper, brass, aluminum and mild steel tubing 1/8 to 1-1/8" (3 to 27 mm) outside diameter Tapered burr remover Hardened cutting wheel Compact design for easy carry

Features

  • Cuts copper, brass, aluminum and mild steel tubing 1/8 to 1-1/8" (3 to 27 mm) outside diameter
  • Tapered burr remover
  • Hardened cutting wheel
  • For copper and brass tubing and brake lines
  • See more on Amazon...

Brand: Performance Tool   |   Manufacturer: Wilmar

Item Dimensions: 7.5 x 3.3 x 1.5 inches (19.1 x 8.4 x 3.8 cm)   |   Package Dimensions: 3.75 x 5.63 x 9.03 inches (9.5 x 14.3 x 22.9 cm)

Amazon Price: $4.72 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $9.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

PTFE Teflon tube cutter, cut up to 3/4'' OD tube- Allen tech

 Ean: 0704256851088   |    PartNumber: Tubecutter   |   Asin: B0756D2T73

PTFE Teflon tube cutter

Features

Brand: Allen Tech   |   Manufacturer: Allen Tech

Package Dimensions: 0.8 x 1.4 x 3.5 inches (2.0 x 3.6 x 8.9 cm)

Amazon Price: $7.99 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

LENOX Tools Tight Space Tubing Cutter Kit, 3-Piece (14833TSK)

Model: 14833TSK   |    Mpn: 14833TSK   |    Ean: 0082472148336   |    PartNumber: 14833TSK   |   Asin: B0052EOWQW

This LENOX TIGHT SPACES tubing Cutter Kit includes tube cutters that have shock-resistant steel with optimized blade geometry to provide less burr and more cuts. Each tube cutter features a non-slip grooved cast body that only needs 1/2-inch clearance to cut. Their stainless-steel rollers protect them from rust and corrosion.

Features

  • Less Burr. More Cuts - Optimized blade geometry of shock-resistant steel
  • Compact Design for Tight Spots - Non-slip grooved cast aluminum body only needs 1/2 clearance to cut
  • No Rusting - Stainless steel rollers protect the cutter from corrosion
  • Quick Identification - Color coding for easy tool recognition and cutting direction
  • Kit Includes 1/2, 3/4 and 1 Tight Space Tubing Cutters
  • See more on Amazon...

Brand: Lenox Tools   |   Manufacturer: Standard Plumbing Supply

Item Dimensions: 4 x 2 x 5 inches (10.2 x 5.1 x 12.7 cm)   |   Package Dimensions: 1.6 x 8.2 x 12.4 inches (4.1 x 20.8 x 31.5 cm)

Amazon Price: $34.84 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $67.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

RIDGID 32920 Model 15 Screw Feed Tubing Cutter, 3/16-inch to 1-1/8-inch Tube Cutter

Model: 32920   |    Mpn: 32920   |    Ean: 0640026912026   |    PartNumber: 32920   |   Asin: B00018AFG0

The versatile RIGID 32920 Screw Feed Tubing Cutter is designed to easily make clean, square cuts on copper, brass, aluminum and thin-wall steel. The steel tube cutter features a large, ergonomic X-CEL knob that provides a firmer grip so you can cut tubing more quickly and easily, and it has a convenient fold-away reamer. This tubing and conduit cutter has a 3/16-inch to 1-1/8-inch cutting capacity.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

  • Easily executes clean, square cuts on copper, brass, aluminum and thin-wall steel
  • Large, ergonomic X-CEL knob provides a firm grip so you can cut tubing quickly and easily
  • Features a convenient fold-away reamer to clean and insure a better connection
  • Tubing cutter has a 3/16-inch to 1-1/8-inch (5 mm to 28 mm) cutting capacity
  • RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
  • See more on Amazon...

Brand: Ridgid   |   Manufacturer: Ridgid Tool Company

Item Dimensions: 3.94 x 3.94 x 9.84 inches (10.0 x 10.0 x 25.0 cm)   |   Package Dimensions: 2 x 5 x 5 inches (5.1 x 12.7 x 12.7 cm)

Amazon Price: $23.26 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $31.65

Warranty: Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Milwaukee 48-38-0010 M12 Replacement Cutter Wheel 2-Pack

 PartNumber: 48-38-0010   |   Asin: B007W2ILPA

Milwaukee 48-38-0010 M12 Replacement Cutter Wheel 2-Pack
This part is compatible with the following machines:Milwaukee2471-21 M12 Copper Tubing Cutter2471-21 M12 Copper Tubing Cutter

Features

  • Precision machined for fast, accurate cuts
  • Hardened steel with black oxide for long life
  • Convex blade design reduces chipping
  • For use with Milwaukee 12V Copper Tubing Cutter, model 2471 (sold separately)
  • See more on Amazon...

Manufacturer: Milwaukee

Package Dimensions: 2.3 x 5.4 x 8.2 inches (5.8 x 13.7 x 20.8 cm)

Amazon Price: $8.50 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $9.10

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

PEX Cutter for Cutting 1/8"-1" PEX Tubings (1/8", 1/4", 3/8", 1/2", 3/4", 1 Diameter) Portable PEX Cutting Tool One-hand Fast Tube Cutter with Clean & Straight Cuts, Not for PVC Pipe

 PartNumber: XL-A1411   |   Asin: B07CTHZL1J

Features:
Perfect for PEX pipe and Plastic Tubing.
Spring loaded handle for quick opening/fast cutting.
Cutting capacity is 1/8"-1". (1/8", 1/4", 3/8", 1/2", 3/4", 1")
Make straight, clean and burr-free cuts.
Special rib design is great for squished plastic tubing.
Please DO NOT use to cut metallic pipes or cable wire.

Warm Tips:
When cut pipe, please take eye protection measures.
Never use on or near live electrical circuits.
Do not use to cut metallic pipes or cable wire

Features

  • A Must-have Tool XOOL PEX Tube Cutter is ideal for use on PEX pipe and Plastic Tubing. It is an essential cutting tool for home handy man and plumbers. It is perfect for the DIY home-owner or the professional looking for the perfect way to get started with PEX plumbing. Its cutting capacity is 1/8"-1". It is very useful and awesome. Attention Please: Do not use to cut metallic pipes or cable wire.
  • Excellent Product Performance The unique design of tube cutter allows for user with one hand and gives you the ability to cut out straight, clean and burr-free PEX pipe. Convenient spring tension gives superior power and comfort, fits your palm and allows for maximum force output. Comfortable design for easy cutting and less hand fatigue.
  • High Quality The durable PEX tube cutter is made of Stainless Steel that is high hardness, good toughness, strength and durable. It has a strong, solid, but not too heavy design. The blade process heat-treated to make blade more sharp, durable and not easy to break. At the same, it is not easy rusting.
  • Ergonomics Design The professional PEX tube cutter adopts special design that have a rib in the body of pipe cutter. You can recover the squished plastic tubing by inserting the rib into pipe. The powerful bite force makes the work easier. Ergonomics handle is for added comfort, which guarantee on long-lasting working. The PEX pipe cutter can improve work efficiency by fast cutting. User can cut pipe within 5 to 10 seconds, which greatly save times.
  • Convenient Storage In the bottom of pipe cutter, there have a stainless buckle. When you don't use it, you can buckle the safe lock. The tube cutter will become small to save your space. And it will also become portable, which is convenient for your work and life. You can put it on your pocket and take it to anywhere you want to go.
  • See more on Amazon...

Brand: XOOL   |   Manufacturer: Shenzhen Baishichuangyou Technology co.,Ltd.

Package Dimensions: 0.87 x 3.66 x 9.72 inches (2.2 x 9.3 x 24.7 cm)

Amazon Price: $7.79 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

RIDGID 31642 Model 152 Quick-Acting Tubing Cutter, 1/4-inch to 2-5/8-inch Tube Cutter

Model: 31642   |    Mpn: 31642   |    Ean: 0095691316424   |    PartNumber: 31642   |   Asin: B0009W2T3A

The RIDGID 31642 Quick-Acting Tubing Cutter delivers fast and clean cuts every time. Offering enhanced productivity, the tube cutter has a large ergonomic X-CEL knob that provides a firmer grip so you can cut tubing quickly and easily, and an X-CEL ball detent wheel pin that allows for quick, tool-free cutter wheel changes in seconds, with no lost clips.

Built to stand the test of time, the metal tube cutter features sturdy I-beam construction and durable, hardened wear surfaces. It has thrust bearing slide assemblies for smooth operation, and a convenient fold-away reamer.

The tubing cutter has a 1/4-inch to 2-5/8-inch cutting capacity and is available in models for cutting plastic pipe or metallic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

Features

  • X-CEL knob for cutting tubing more quickly and easily with a larger, more ergonomic design
  • Quick-acting design, I-beam construction and hardened wear surfaces for superior durability. Thrust-bearing slide assemblies for smooth operation
  • Features a convenient fold-away reamer to clean and insure a better connection
  • X-CEL wheel pin with ball detent designs allows you to change the cutter wheel quickly with no tool needed and no lost clips
  • Tubing cutter has a 1/4-inch to 2-5/8-inch (6 mm to 66 mm) cutting capacity
  • See more on Amazon...

Brand: Ridgid   |   Manufacturer: Ridgid Tool Company

Item Dimensions: 2.7 x 5.1 x 10 inches (6.9 x 13.0 x 25.4 cm)   |   Package Dimensions: 2.2 x 4.9 x 10.4 inches (5.6 x 12.4 x 26.4 cm)

Amazon Price: $59.00 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $78.35 | Used Price: $57.59

Warranty: Lifetime warranty on material defects and workmanship for the normal life of the product

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

TmallTech Pipe Tube Hose Cutter 1/4" 3/8" 1/2" PVC Nylon PU for RO Reverse Osmosis System

Model: COMIN16JU007197   |    Mpn: ROCON-13   |    Ean: 0713458679598   |    PartNumber: ROCON-13   |   Asin: B00VRV6SE8

It is a cutter for PVC, PU and plastic hose.

Features

Brand: TmallTech   |   Manufacturer: DIGITEN

Package Dimensions: 0.4 x 3.2 x 5.5 inches (1.0 x 8.1 x 14.0 cm)

Amazon Price: $5.79 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $5.79

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Master Plumber 745122 5/8 To 2-1/8-Inch Large Pipe Tube Cutter

Model: 745122   |    Mpn: 745122   |    Ean: 0052088019092   |    PartNumber: 745122   |   Asin: B001H1JOE4

Master Plumber 745122 Large Diameter Tube Cutter cuts 5/8" to 2-1/8" outer diameter tubing. Long lasting construction.

Features

  • Cuts larger tubing
  • Use to cut 5/8 to 2-1/8 outer diameter tubing
  • Long lasting construction
  • See more on Amazon...

Brand: Master Plumber   |   Manufacturer: Master Plumber

Item Dimensions: 1.25 x 4.25 x 6.5 inches (3.2 x 10.8 x 16.5 cm)   |   Package Dimensions: 1.4 x 9.2 x 10 inches (3.6 x 23.4 x 25.4 cm)

Amazon Price: $14.29 | as of 11/21/2018(4:53am pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter
  2. RIDGID 32975 Model 103 Close Quarters Tubing Cutter, 1/8-inch to 5/8-inch Tube Cutter
  3. RIDGID 31632 Model 151 Quick-Acting Tubing Cutter, 1/4-inch to 1-7/8-inch Tube Cutter
  4. RIDGID 32985 Model 104 Close Quarters Tubing Cutter, 3/16-inch to 15/16-inch Tube Cutter
  5. GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch
  6. RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel, Pipe Cutter Wheel
  7. Gunpla PVC Pipe and Plastic Tubing Cutter for Cutting up to 1-5/8inch/42mm OD Tubing
  8. SharkBite PEX Tubing Cutter, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 Inch Tube Cutter, U701A
  9. RIDGID 118 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle, 1/4-inch to 1-1/8-inch T...
  10. RIDGID 29963 Model 35S Stainless Steel Tubing Cutter, 1/4-inch to 1-3/8-inch Tube Cutter

Most Wished For

  1. RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter
  2. RIDGID 32975 Model 103 Close Quarters Tubing Cutter, 1/8-inch to 5/8-inch Tube Cutter
  3. RIDGID 31632 Model 151 Quick-Acting Tubing Cutter, 1/4-inch to 1-7/8-inch Tube Cutter
  4. RIDGID 32985 Model 104 Close Quarters Tubing Cutter, 3/16-inch to 15/16-inch Tube Cutter
  5. GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch
  6. RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel, Pipe Cutter Wheel
  7. Gunpla PVC Pipe and Plastic Tubing Cutter for Cutting up to 1-5/8inch/42mm OD Tubing
  8. SharkBite PEX Tubing Cutter, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 Inch Tube Cutter, U701A
  9. RIDGID 118 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle, 1/4-inch to 1-1/8-inch T...
  10. RIDGID 29963 Model 35S Stainless Steel Tubing Cutter, 1/4-inch to 1-3/8-inch Tube Cutter

Most Gifted

  1. RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter
  2. RIDGID 32975 Model 103 Close Quarters Tubing Cutter, 1/8-inch to 5/8-inch Tube Cutter
  3. RIDGID 31632 Model 151 Quick-Acting Tubing Cutter, 1/4-inch to 1-7/8-inch Tube Cutter
  4. RIDGID 32985 Model 104 Close Quarters Tubing Cutter, 3/16-inch to 15/16-inch Tube Cutter
  5. GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch
  6. RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel, Pipe Cutter Wheel
  7. Gunpla PVC Pipe and Plastic Tubing Cutter for Cutting up to 1-5/8inch/42mm OD Tubing
  8. SharkBite PEX Tubing Cutter, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 Inch Tube Cutter, U701A
  9. RIDGID 118 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle, 1/4-inch to 1-1/8-inch T...
  10. RIDGID 29963 Model 35S Stainless Steel Tubing Cutter, 1/4-inch to 1-3/8-inch Tube Cutter

Top Selling

  1. RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter
  2. RIDGID 32975 Model 103 Close Quarters Tubing Cutter, 1/8-inch to 5/8-inch Tube Cutter
  3. RIDGID 31632 Model 151 Quick-Acting Tubing Cutter, 1/4-inch to 1-7/8-inch Tube Cutter
  4. RIDGID 32985 Model 104 Close Quarters Tubing Cutter, 3/16-inch to 15/16-inch Tube Cutter
  5. GOCHANGE Mini Tube Cutter Slice Copper Aluminum Tubing Pipe Cutting Tool 3-22mm 1/8inch-7/8inch
  6. RIDGID 41317 Model E-3469 Tubing Cutter Replacement Wheel, Pipe Cutter Wheel
  7. Gunpla PVC Pipe and Plastic Tubing Cutter for Cutting up to 1-5/8inch/42mm OD Tubing
  8. SharkBite PEX Tubing Cutter, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 Inch Tube Cutter, U701A
  9. RIDGID 118 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle, 1/4-inch to 1-1/8-inch T...
  10. RIDGID 29963 Model 35S Stainless Steel Tubing Cutter, 1/4-inch to 1-3/8-inch Tube Cutter



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.