Frontpage > Industrial > Power Transmission > Angular Contact Ball Bearings

Best Angular Contact Ball Bearings - Buying Guide

Last Updated: 11/21/2018

Share on


  #1

5205-2RS Angular Contact Sealed Bearing 25x52x20.6 Ball Bearings VXB Brand

 PartNumber: Kit6938   |   Asin: B002BBGTWO

The VXB 5205-2RS double-row angular contact ball bearing is double-sealed and has a 20-degree contact angle, pressed steel cage, and normal clearance rating. It supports radial loads, thrust loads in both directions, and combined loads, and occupies less thrust space than a pair of single-row angular contact ball bearings mounted together. Because the two rows of rolling elements are mounted back-to-back, the bearing arrangement is relatively rigid and can accommodate tilting moments. The 52 series has a smaller cross section than the 53 series, making it suitable for smaller spaces, lighter loads, and higher speeds. This bearing is made of low-alloy, through-hardened carbon chromium steel for durability and resistance to deformity under heavy loads. The 20-degree contact angle of the balls in relation to the raceways gives the bearing a greater capacity for supporting thrust loads over bearings with a standard contact angle of zero degrees. Rubber seals on both sides of the bearing keep out contaminants such as dirt and grime and hold in lubricant applied at manufacture. This bearing has a pressed steel cage to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a normal axial internal clearance designation, making it suitable for applications where the load and speeds do not result in thermal expansion. This clearance provides latitude for self-realignment and compensates for static and dynamic alignment errors. This angular contact ball bearing is for use in commercial and industrial applications including pumps and compressors, automotive drives, gearboxes, and printing machines, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Features

  • Double-row angular contact ball bearing, supporting combined radial and bidirectional thrust loads
  • Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Normal axial internal clearance for applications where thermal expansion is not a factor
  • See more on Amazon...

Brand: VXB   |   Manufacturer: VXB

Package Dimensions: 1 x 5 x 5 inches (2.5 x 12.7 x 12.7 cm)

Amazon Price: $19.49 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $14.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Wheels Manufacturing BB30 Service kit with 2 Clips and 2 x 6806 Angular Contact Bearings

 Ean: 0811079021021   |    PartNumber: BB30-AC-KIT   |   Asin: B010QOLK6M

x

Features

  • Dimensions: OD: 42mm ID: 30mm Width: 7mm
  • Direct replacement bearing for BB30 OEM systems
  • Includes (2) Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips
  • BB30 replacement bearings and retention clips.
  • See more on Amazon...

Brand: Wheels Manufacturing   |   Manufacturer: Wheels Manufacturing

Item Dimensions: 0.75 x 1.5 x 1.5 inches (1.9 x 3.8 x 3.8 cm)   |   Package Dimensions: 0.51 x 2.36 x 3.31 inches (1.3 x 6.0 x 8.4 cm)

Amazon Price: $30.83 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $30.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

5203-2NSL Nachi Double Row Angular Contact Bearing 17x40x17.5 Sealed

 PartNumber: KIT10107   |   Asin: B0045DWDJE

The Nachi 5203-2NSL double-row angular contact ball bearing is double-sealed and has a 20-degree contact angle, pressed steel cage, and normal clearance rating. It supports radial loads, thrust loads in both directions, and combined loads, and occupies less thrust space than a pair of single-row angular contact ball bearings mounted together. Because the two rows of rolling elements are mounted back-to-back, the bearing arrangement is relatively rigid and can accommodate tilting moments. The 52 series has a smaller cross section than the 53 series, making it suitable for smaller spaces, lighter loads, and higher speeds. This bearing is made of low-alloy, through-hardened carbon chromium steel for durability and resistance to deformity under heavy loads. The 20-degree contact angle of the balls in relation to the raceways gives the bearing a greater capacity for supporting thrust loads over bearings with a standard contact angle of zero degrees. Rubber seals on both sides of the bearing keep out contaminants such as dirt and grime and hold in lubricant applied at manufacture. This bearing has a pressed steel cage to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a normal axial internal clearance designation, making it suitable for applications where the load and speeds do not result in thermal expansion. This clearance provides latitude for self-realignment and compensates for static and dynamic alignment errors. This angular contact ball bearing is for use in commercial and industrial applications including pumps and compressors, automotive drives, gearboxes, and printing machines, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Nachi-Fujikoshi manufactures bearings, cutting tools, hydraulic equipment, and high speed steel for industrial applications. The company, founded in 1928, is headquartered in Toyama, Japan.

Features

  • Double-row angular contact ball bearing, supporting moderate combined radial and bidirectional thrust loads
  • Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Normal axial internal clearance for applications where thermal expansion is not a factor
  • See more on Amazon...

Brand: VXB   |   Manufacturer: VXB

Package Dimensions: 0.6 x 5 x 5 inches (1.5 x 12.7 x 12.7 cm)

Amazon Price: $32.37 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $26.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

NACHI 5309 Double Row Angular Ball Bearings, 45 mm ID, 100 mm OD 39.7 mm Width

Model: 5309   |    Mpn: 5309   |    PartNumber: 5309   |   Asin: B0153VKN5W

Bearings

Features

Brand: Nachi   |   Manufacturer: NACHI

Item Dimensions: 3.94 x 1.56 x 1.77 inches (10.0 x 4.0 x 4.5 cm)   |   

Amazon Price: $135.35 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $158.64

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Enduro TorqTite Bottom Bracket: PF30 to 24mm Angular Contact Steel Bearing Black

 Ean: 0810191010081   |    PartNumber: BKS-0111   |   Asin: B07KFMSYFZ

The TorqTite bottom bracket line is designed to replace any press fit type on the market. This means no more glue, paste or tape to try and keep things quiet. This unique and patent pending system uses a double threaded internal sleeve to tighten the right and left cups with two spanner wrenches and torque your bottom bracket tight on installation. No more movement or internal fretting of your bottom bracket against your carbon fiber or aluminum frame, just a tightened mechanical system eliminating annoying and unwanted noises. Noises and internal friction that can also sap energy and wattage output. TorqTite guarantees perfect parallel alignment between the bearings even if the frame is not perfectly straight, eliminating lost energy.

Features

  • Double threaded internal sleeve to tighten the right and left cupswith two spanner wrenches
  • torque your bottom bracket tight on installation
  • TorqTite guarantees perfect parallel alignment between the bearings
  • For PF30 frames with 24mm cranks
  • See more on Amazon...

Brand: Enduro   |   Manufacturer: Enduro

Item Dimensions: 2.25 x 2.25 x 4.75 inches (5.7 x 5.7 x 12.1 cm)   |   

Amazon Price: $179.10 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 2-3 business days
List Price: $199.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

5204-2RS double row seals bearing 5204-rs ball bearings 5204 rs

Model: 5204-2RS   |    Mpn: 5204-2RS   |    PartNumber: 5204-2RS   |   Asin: B015BKATXG

***Double-row Angular Contact Ball Bearings ***Dimension D (Outside) 47 mm d (Inside) Bore 20 mm B (Width) 20.6 mm ***Shield/Closure codes 2RS(Two Side Rubber Seal) ***Lubrication : Grease (Wide Temperature Range: - 20 C to 120 C)

Features

  • 5204-2RS double row seals bearing 5204-rs ball bearings 5204 rs
  • Double-row Angular Contact Ball Bearings
  • Material: Chrome Steel (Gcr15)
  • Closure:Both side rubber seals
  • Quality bearing
  • See more on Amazon...

Brand: JSB   |   Manufacturer: JSB Great Bearings

Package Dimensions: 1 x 2 x 2 inches (2.5 x 5.1 x 5.1 cm)

Amazon Price: $11.24 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $11.24

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

7007B Angular Contact Bearing 35x62x14 Ball Bearings VXB Brand

 PartNumber: Kit8891   |   Asin: B002UEFJAA

The VXB 7007B single-row angular contact ball bearing is an open bearing and has a 40-degree contact angle, pressed steel cage, and normal clearance rating. It supports moderate one-directional thrust loads, and combined radial and thrust loads where the thrust load is predominant. This bearing is made of low-alloy, through-hardened carbon chromium steel for durability and resistance to deformity under heavy loads. The 40-degree contact angle of the balls in relation to the raceways gives the bearing a greater capacity for supporting thrust loads over bearings with a lower contact angle. Its open design facilitates lubricating the bearing in place and dissipating heat. This bearing has a pressed steel cage to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a normal axial internal clearance designation, making it suitable for applications where the load and speeds do not result in thermal expansion. This clearance provides latitude for self-realignment and compensates for static and dynamic alignment errors. This angular contact ball bearing is for use in commercial and industrial applications including pumps and compressors, automotive drives, gearboxes, and printing machines, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Features

  • Single-row angular contact ball bearing, supporting moderate one-directional thrust loads, and combined loads where thrust load is predominant
  • Ball contact angle of 40 degrees relative to the inner and outer raceways increases thrust load capacity
  • Open configuration for lubrication applied in place
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Normal axial internal clearance for applications where thermal expansion is not a factor
  • See more on Amazon...

Brand: VXB   |   Manufacturer: VXB

Package Dimensions: 0.5 x 3 x 3.1 inches (1.3 x 7.6 x 7.9 cm)

Amazon Price: $16.88 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $12.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

SKF 7306 BECBY Single Row Angular Contact Ball Bearing With Pressed Brass Cage

Model: 7306 BECBY   |    Mpn: 7306 BECBY   |    Ean: 0605779323659   |    PartNumber: 7306 BECBY   |   Asin: B002U2OJ58

Single Row Angular Contact Ball Bearing With Pressed Brass Cage

Features

Brand: SKF   |   Manufacturer: SKF

Item Dimensions: 2 x 6 x 8 inches (5.1 x 15.2 x 20.3 cm)   |   Package Dimensions: 6.3 x 6.3 x 6.3 inches (16.0 x 16.0 x 16.0 cm)

Amazon Price: $30.70 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $30.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Wheels Manufacturing BSA 30 Bottom Bracket with Angular Contact Bearings:

 Ean: 0811079021922   |    PartNumber: BB-BSA30-AC   |   Asin: B016DCEMMU

For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm BB30 Wide BB30a 386EVO Rotor 3D SRAM BB30 Wide Will not work with standard BB30 cranksets Use only bottom bracket tools compatible with 16-notch MegoEvo BBs. FSA MegaEvo and Park Tool BBT-29

Features

  • Replaceable Enduro bearings
  • Made in the USA
  • ABEC-5 Angular Contact sealed bearings
  • Angular contact ball bearings are particularly suitable for carrying combined axial and radial loads
  • For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm (BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide)
  • See more on Amazon...

Brand: Wheels Manufacturing   |   Manufacturer: Wheels Manufacturing

Item Dimensions: 2.1 x 2.25 x 4.75 inches (5.3 x 5.7 x 12.1 cm)   |   Package Dimensions: 2.25 x 2.25 x 4.75 inches (5.7 x 5.7 x 12.1 cm)

Amazon Price: Too low to display | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $74.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

5304-2RS double row seals bearing 5304-rs ball bearings 5304 rs

Model: 5304-2RS   |    Mpn: 5304-2RS   |    PartNumber: 5304-2RS   |   Asin: B00KZYA02O

***Double-row Angular Contact Ball Bearings ***Dimension D (Outside) 52 mm d (Inside) Bore 20 mm B (Width) 22.2 mm ***Shield/Closure codes 2RS(Two Side Rubber Seal) ***Lubrication : Grease ( Wide Temperature Range: - 20 C to 120 C )

Features

  • 5304-2RS double row seals bearing 5304-rs ball bearings 5304 rs
  • Double-row Angular Contact Ball Bearings
  • Material: Chrome Steel (Gcr15)
  • Closure:Both side rubber seals
  • Quality bearing
  • See more on Amazon...

Brand: JSB   |   Manufacturer: JSB

Amazon Price: $16.24 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $16.24

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

FAG 7207B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40 Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 35mm ID, 72mm OD, 17mm Width, 11000rpm Maximum Rotational Speed, 4150lbf Static Load Capacity, 6100lbf Dynamic Load Capacity,

 Ean: 4012801165969   |    PartNumber: 7207-B-TVP-UA   |   Asin: B007MF03NK

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications Main bearing dimensions DIN 715 Basic dynamic load ratings DIN ISO 281 Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN Through-hardening steel for inner and outer rings and rollers ISO 683-17 Steel strip for cage EN 10139, SAE J403 Load carrying capacity and life DIN ISO 281 Appendix 1 System for creating part numbers for rolling bearings DIN 623-1 Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut f r Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
  • See more on Amazon...

Brand: FAG Bearings   |   Manufacturer: Schaeffler Technologies Co.

Package Dimensions: 0.8 x 2.9 x 3 inches (2.0 x 7.4 x 7.6 cm)

First Available: 2017-11-25

Amazon Price: $77.06 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 3 to 5 days
List Price: $90.26

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

The General 7516 DL Extra Light Extended Inner Ring Bearing, Double Sealed, No Snap Ring, Inch, 1" Bore, 2" OD, 3/4" Width, 1096 lbs Static Load Capacity, 2040 lbs Dynamic Load Capacity

 Ean: 0662300410257   |    PartNumber: 7516 DL   |   Asin: B006KSUPM4

This General Bearing DL extra light radial ball bearing with an extended inner ring has seals on both ends, and is suitable for applications with radial and axial loads. It is made of hardened and ground chrome steel, and the inner ring has an extended width for applications in which axial movement may be present. The bearing has a reduced cross section for use in restricted mounting spaces with large shaft diameters. The steel cage provides guidance and even spacing of the balls for minimum vibration and noise when operated at high speeds. This bearing has lip contact seals on both ends to help retain lubricants and exclude contaminants. There is a snap ring groove for positioning the bearing using a snap ring (sold separately). This radial ball bearing is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

General Bearing manufactures bearings and bearing components. The company, founded in 1958 and headquartered in West Nyack, NY, meets International Organization for Standardization (ISO) standards 9001 and TS 16949 for quality assurance.

Features

  • Extra light radial ball bearing for supporting radial and axial loads
  • Reduced cross-section for use in restricted spaces with large shaft sizes
  • Steel cage guides and evenly spaces balls for reduced friction, vibration, and noise
  • Extended inner ring for applications in which axial movement may be present
  • Lip contact seals on both ends to help retain lubricants and exclude contaminants
  • See more on Amazon...

Brand: The General   |   Manufacturer: The General

Package Dimensions: 1 x 2.3 x 2.4 inches (2.5 x 5.8 x 6.1 cm)

Amazon Price: $21.96 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $21.96

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

[4] Slow Speed Flanged Ball Bearing 1-1/8" OD x 1/2" ID for Small Bore Wheel

 Ean: 0705332869560   |    PartNumber: 12118   |   Asin: B07584HB4B

Caster Part

Features

  • 1/2" ID x 1-1/8" OD
  • Bearing
  • (Pack of 4) Caster Part 12118 Bearing
  • 1-1/8 OD x 1/2 ID
  • (Pack of 4)
  • See more on Amazon...

Brand: Encore   |   Manufacturer: Acor

Package Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)

Amazon Price: $13.99 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $13.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

2 Bearing 7200B 10x30x9 Angular Contact

 PartNumber: Kit1084   |   Asin: B002BBILZC

The VXB 7200B angular contact ball bearing duplex set is an open bearing and has a 40-degree contact angle, pressed steel cage, and normal clearance rating. The set of two single-row bearings supports moderate thrust loads, and combined radial and thrust loads. When mounted in pairs back-to-back or face-to-face, the bearing arrangement is relatively rigid for bidirectional thrust loads. This bearing is made of low-alloy, through-hardened carbon chromium steel for durability and resistance to deformity under heavy loads. The 40-degree contact angle of the balls in relation to the raceways gives the bearing a greater capacity for supporting thrust loads over bearings with a lower contact angle. Its open design facilitates lubricating the bearing in place and dissipating heat. This bearing has a pressed steel cage to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a normal axial internal clearance designation, making it suitable for applications where the load and speeds do not result in thermal expansion. This clearance provides latitude for self-realignment and compensates for static and dynamic alignment errors. This angular contact ball bearing is for use in commercial and industrial applications including pumps and compressors, automotive drives, gearboxes, and printing machines, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Features

  • Set of two single-row angular contact ball bearings for universal arrangement, supporting moderate thrust loads, and combined radial and thrust loads
  • Ball contact angle of 40 degrees relative to the inner and outer raceways increases thrust load capacity
  • Open configuration for lubrication applied in place
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Normal axial internal clearance for applications where thermal expansion is not a factor
  • See more on Amazon...

Brand: VXB   |   Manufacturer: VXB

Package Dimensions: 0.2 x 5 x 5 inches (0.5 x 12.7 x 12.7 cm)

Amazon Price: $12.95 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $9.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

FAG 7310B-TVP-UA Angular Contact Ball Bearing, Single Row, Open, 40 Contact Angle, Polyamide/Nylon Cage, Normal Clearance, Metric, 50mm ID, 110mm OD, 27mm Width, 7000rpm Maximum Rotational Speed, 11400lbf Static Load Capacity, 16000lbf Dynamic Load Capacity,

Model: 7310B.TVP.UA   |    Mpn: 7310-B-TVP-UA   |    Ean: 4012801013314   |    PartNumber: 7310-B-TVP-UA   |   Asin: B007MF08RQ

The FAG single-row, open, angular contact bearing has asymmetric races with a 40-degree contact angle to support both axial and radial loads. It has a CN (normal) radial internal clearance for applications that do not involve thermal expansion, and its polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise. It has an open configuration for lubrication in place and applications involving negligible exposure to dirt, grime, debris, and other contaminants. This angular contact ball bearing is suitable for use in applications that involve combined radial and axial loads, and a need for high running accuracy and stiffness at high rotational speeds. These applications include clutches, drives, gearboxes, compressors, pumps, turbines, and printing and textile machines, among others.

Specifications Main bearing dimensions DIN 715 Basic dynamic load ratings DIN ISO 281 Dimensional and geometric tolerances DIN 620-3 (ISO 199), tolerance class PN Through-hardening steel for inner and outer rings and rollers ISO 683-17 Steel strip for cage EN 10139, SAE J403 Load carrying capacity and life DIN ISO 281 Appendix 1 System for creating part numbers for rolling bearings DIN 623-1 Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut f r Normung (DIN) standards for quality assurance. The company, founded in 1883, is based in Schweinfurt, Germany.

Features

  • Axially asymmetric races with a 40 degree contact angle to support both axial and radial loads
  • CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
  • Polyamide/nylon cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants
  • See more on Amazon...

Brand: FAG Bearings   |   Manufacturer: Schaeffler Technologies Co.

Item Dimensions: 0.24 x 0.28 x 0.28 inches (0.6 x 0.7 x 0.7 cm)   |   Package Dimensions: 1.4 x 4.7 x 4.8 inches (3.6 x 11.9 x 12.2 cm)

Amazon Price: $49.50 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 3 to 5 days
List Price: $150.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

5203-2RS Bearing Angular Contact Sealed 17x40x17.5 Ball Bearings VXB Brand

 PartNumber: Kit6935   |   Asin: B002BBM5M2

The VXB 5203-2RS double-row angular contact ball bearing is double-sealed and has a 20-degree contact angle, pressed steel cage, and normal clearance rating. It supports radial loads, thrust loads in both directions, and combined loads, and occupies less thrust space than a pair of single-row angular contact ball bearings mounted together. Because the two rows of rolling elements are mounted back-to-back, the bearing arrangement is relatively rigid and can accommodate tilting moments. The 52 series has a smaller cross section than the 53 series, making it suitable for smaller spaces, lighter loads, and higher speeds. This bearing is made of low-alloy, through-hardened carbon chromium steel for durability and resistance to deformity under heavy loads. The 20-degree contact angle of the balls in relation to the raceways gives the bearing a greater capacity for supporting thrust loads over bearings with a standard contact angle of zero degrees. Rubber seals on both sides of the bearing keep out contaminants such as dirt and grime and hold in lubricant applied at manufacture. This bearing has a pressed steel cage to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a normal axial internal clearance designation, making it suitable for applications where the load and speeds do not result in thermal expansion. This clearance provides latitude for self-realignment and compensates for static and dynamic alignment errors. This angular contact ball bearing is for use in commercial and industrial applications including pumps and compressors, automotive drives, gearboxes, and printing machines, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Features

  • Double-row angular contact ball bearing, supporting combined radial and bidirectional thrust loads
  • Ball contact angle of 20 degrees relative to the inner and outer raceways increases thrust load capacity
  • Rubber seals on both sides of the bearing to keep lubricant in and contaminants out
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Normal axial internal clearance for applications where thermal expansion is not a factor
  • See more on Amazon...

Brand: VXB   |   Manufacturer: VXB

Package Dimensions: 0.2 x 3 x 5 inches (0.5 x 7.6 x 12.7 cm)

Amazon Price: $9.80 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $9.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

5x 5203 2RS Double Row Sealed Angular Contact Ball Bearings - 17x40x17.5 mm

 Ean: 0645638705998   |    PartNumber: 5xB136   |   Asin: B079PK5J62

VMS 5203-2RS Double row angular contact sealed ball bearing Premium quality, precision high-speed bearings with low draw, double lip seals that improve grease retention while keeping out moisture and dirt. Type: Sealed Double-Row Angular Contact Ball Bearing Material: Chrome Steel Shield: Rubber Seals (2 sides) Lubrication: Grease (Self Lubricated) Dynamic load rating Cr: 15,000N Static load rating Cor: 9,250N Limiting Speed: Grease Lubrication: 12,000 RPM Dimensions: 17mm x 40mm x 17.5mm Inner Diameter: 17mm Outer Diameter: 40mm Width: 17.5mm Quantity: 5 Bearings

Features

Brand: Volar Motorsport, Inc   |   Manufacturer: Volar Motorsport, Inc

Amazon Price: $34.90 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $34.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

7213B Bearing 65x120x23 Angular Contact Ball Bearings

 PartNumber: Kit12149   |   Asin: B004YL4ES0

7213B Single Row Angular Contact For Axial Radial Loads Spindle Ball Bearing One Bearing 7213B Single Row Angular Contact Spindle Ball Bearing, this is a popular size that could be used in many applications that needs Cobined loads (Axial and Radial), Axial loads can be taken on one direction only. Bearing is made of Chrome Steel. * Item: 7213B Ball Bearing * Type: Single Row Angular Contact Ball Bearing (Spindle Ball Bearing) * Dimensions: 65mm x 120mm x 23mm /Metric * inner diameter: 65mm * outer diameter: 120mm * Width: 23mm * Size: 65 x 120 x 23 mm * Quantity: One Bearing * Dynamic load rating Cr: 70,000 N * Static load rating Cor: 57,800 N * Limiting Speed: * Grease Lubrication: 4,900 RPM * Oil Lubrication: 6,500 RPM

Features

  • Item: 7213B Ball Bearing
  • Type: Single Row Angular Contact Ball Bearing (Spindle Ball Bearing)
  • Dimensions: 65mm x 120mm x 23mm /Metric
  • inner diameter: 65mm
  • outer diameter: 120mm
  • See more on Amazon...

Brand: VXB   |   Manufacturer: VXB

Amazon Price: $35.95 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $29.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Nice Ball Bearing 3020DS Double Shielded, 52100 Bearing Quality Steel, 0.4375" Bore x 1.3750" OD x 0.4375" Width

 Ean: 0637400733001   |    PartNumber: 3020DSTNTG18   |   Asin: B0034G64U2

RBC Bearings Nice Ball Bearings (3020DSTNTG18)

Features

  • Single-row radial ball bearing for applications that support light radial loads and speeds up to 3000 RPM
  • 0.4375 straight bore for fitting to conventional cylindrical shafts
  • Nylon cage evenly spaces balls for reduced friction, vibration, and noise
  • Case-hardened 52100 bearing quality steel for optimum wear resistance
  • Metal shields on both sides of the bearing keep the lubricant in and contaminants out
  • See more on Amazon...

Brand: Nice   |   Manufacturer: RBC Bearings

Package Dimensions: 0.5 x 1.5 x 1.6 inches (1.3 x 3.8 x 4.1 cm)

Amazon Price: $9.59 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $18.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

7206 Nachi Angular Contact Bearing 30x62x16:Steel Cage:C3:Japan

 PartNumber: KIT10016   |   Asin: B0045DW3JE

The Nachi 7206 single-row angular contact ball bearing is an open bearing and has a 30-degree contact angle, pressed steel cage, and C3 clearance rating. It supports moderate one-directional thrust loads, and combined radial and thrust loads where the thrust load is predominant. The 7200 series has a smaller cross section than the 7300 series, making it suitable for smaller spaces, lighter loads, and higher speeds. This bearing is made of low-alloy, through-hardened carbon chromium steel for durability and resistance to deformity under heavy loads. The 30-degree contact angle of the balls in relation to the raceways gives the bearing a greater capacity for supporting thrust loads over bearings with a standard contact angle of zero degrees. Its open design facilitates lubricating the bearing in place and dissipating heat. This bearing has a pressed steel cage to prevent the balls from coming into contact with each other during use, reducing friction, vibration, and noise. The bearing has a C3 axial internal clearance designation to indicate that the axial slack between the inner and outer rings is greater than the standard CN (normal) clearance. It allows for thermal expansion as the bearing supports radial loads and its balls, operating in the deep raceway geometry, reduce rotational friction. Additionally, this bearing is produced to normal tolerances in accordance with International Organization for Standardization (ISO) 492:2002 standards for quality assurance. This angular contact ball bearing is for use in commercial and industrial applications including pumps and compressors, automotive drives, gearboxes, and printing machines, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Nachi-Fujikoshi manufactures bearings, cutting tools, hydraulic equipment, and high speed steel for industrial applications. The company, founded in 1928, is headquartered in Toyama, Japan.

Features

  • Single-row angular contact ball bearing, supporting moderate one-directional thrust loads, and combined loads where thrust load is predominant
  • Ball contact angle of 30 degrees relative to the inner and outer raceways increases thrust load capacity
  • Open configuration for lubrication applied in place
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise
  • C3 axial internal clearance is larger than normal allowing for thermal expansion
  • See more on Amazon...

Brand: VXB   |   Manufacturer: VXB

Package Dimensions: 1.2 x 3.1 x 4.1 inches (3.0 x 7.9 x 10.4 cm)

Amazon Price: $17.88 | as of 11/21/2018(5:49am pst)
Availibility: Usually ships in 24 hours
List Price: $17.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. 5205-2RS Angular Contact Sealed Bearing 25x52x20.6 Ball Bearings VXB Brand
  2. Wheels Manufacturing BB30 Service kit with 2 Clips and 2 x 6806 Angular Contact Bearings
  3. 5203-2NSL Nachi Double Row Angular Contact Bearing 17x40x17.5 Sealed
  4. NACHI 5309 Double Row Angular Ball Bearings, 45 mm ID, 100 mm OD 39.7 mm Width
  5. Enduro TorqTite Bottom Bracket: PF30 to 24mm Angular Contact Steel Bearing Black
  6. 5204-2RS double row seals bearing 5204-rs ball bearings 5204 rs
  7. 7007B Angular Contact Bearing 35x62x14 Ball Bearings VXB Brand
  8. SKF 7306 BECBY Single Row Angular Contact Ball Bearing With Pressed Brass Cage
  9. Wheels Manufacturing BSA 30 Bottom Bracket with Angular Contact Bearings:
  10. 5304-2RS double row seals bearing 5304-rs ball bearings 5304 rs

Most Wished For

  1. 5205-2RS Angular Contact Sealed Bearing 25x52x20.6 Ball Bearings VXB Brand
  2. Wheels Manufacturing BB30 Service kit with 2 Clips and 2 x 6806 Angular Contact Bearings
  3. 5203-2NSL Nachi Double Row Angular Contact Bearing 17x40x17.5 Sealed
  4. NACHI 5309 Double Row Angular Ball Bearings, 45 mm ID, 100 mm OD 39.7 mm Width
  5. Enduro TorqTite Bottom Bracket: PF30 to 24mm Angular Contact Steel Bearing Black
  6. 5204-2RS double row seals bearing 5204-rs ball bearings 5204 rs
  7. 7007B Angular Contact Bearing 35x62x14 Ball Bearings VXB Brand
  8. SKF 7306 BECBY Single Row Angular Contact Ball Bearing With Pressed Brass Cage
  9. Wheels Manufacturing BSA 30 Bottom Bracket with Angular Contact Bearings:
  10. 5304-2RS double row seals bearing 5304-rs ball bearings 5304 rs

Most Gifted

  1. 5205-2RS Angular Contact Sealed Bearing 25x52x20.6 Ball Bearings VXB Brand
  2. Wheels Manufacturing BB30 Service kit with 2 Clips and 2 x 6806 Angular Contact Bearings
  3. 5203-2NSL Nachi Double Row Angular Contact Bearing 17x40x17.5 Sealed
  4. NACHI 5309 Double Row Angular Ball Bearings, 45 mm ID, 100 mm OD 39.7 mm Width
  5. Enduro TorqTite Bottom Bracket: PF30 to 24mm Angular Contact Steel Bearing Black
  6. 5204-2RS double row seals bearing 5204-rs ball bearings 5204 rs
  7. 7007B Angular Contact Bearing 35x62x14 Ball Bearings VXB Brand
  8. SKF 7306 BECBY Single Row Angular Contact Ball Bearing With Pressed Brass Cage
  9. Wheels Manufacturing BSA 30 Bottom Bracket with Angular Contact Bearings:
  10. 5304-2RS double row seals bearing 5304-rs ball bearings 5304 rs

Top Selling

  1. 5205-2RS Angular Contact Sealed Bearing 25x52x20.6 Ball Bearings VXB Brand
  2. Wheels Manufacturing BB30 Service kit with 2 Clips and 2 x 6806 Angular Contact Bearings
  3. 5203-2NSL Nachi Double Row Angular Contact Bearing 17x40x17.5 Sealed
  4. NACHI 5309 Double Row Angular Ball Bearings, 45 mm ID, 100 mm OD 39.7 mm Width
  5. Enduro TorqTite Bottom Bracket: PF30 to 24mm Angular Contact Steel Bearing Black
  6. 5204-2RS double row seals bearing 5204-rs ball bearings 5204 rs
  7. 7007B Angular Contact Bearing 35x62x14 Ball Bearings VXB Brand
  8. SKF 7306 BECBY Single Row Angular Contact Ball Bearing With Pressed Brass Cage
  9. Wheels Manufacturing BSA 30 Bottom Bracket with Angular Contact Bearings:
  10. 5304-2RS double row seals bearing 5304-rs ball bearings 5304 rs



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.