Frontpage > Industrial > Power Transmission > Bevel & Miter Gears

Best Bevel & Miter Gears - Buying Guide

Last Updated: 01/22/2019

Share on

Bestselling Bevel & Miter Gears on Amazon

  1. CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2
  2. CNBTR Bevel Miter Gear 90 Degrees Tapered 2 Module 20 Teeth 8mm Hole Dia Wheel Pack of 2
  3. Boston Gear PA528Y-P Bevel Pinion Gear, 2:1 Ratio, 0.875" Bore, 8 Pitch, 20 Teeth, 20 Degree Pressur...
  4. Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250" Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle...
  5. Boston Gear G485Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188" Bore, 24 Pitch, 18 Teeth, 20 Degree Pressur...
  6. Boston Gear PA4416Y-P Bevel Pinion Gear, 4:1 Ratio, 0.500" Bore, 16 Pitch, 16 Teeth, 20 Degree Press...
  7. Boston Gear PA4416Y-G Bevel Gear, 4:1 Ratio, 0.625" Bore, 16 Pitch, 64 Teeth, 20 Degree Pressure Ang...
  8. Boston Gear HLK105YA Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 1.000" Bore, 8 Pitch, 24 Teeth...
  9. CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2
  10. CHENGYIDA 40-PACK Plastic Bevel Gear Right Angle Drive Plastic Gears 16T Hole 2mm Toy DIY

  #1

CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2

 Ean: 6930584272866   |    PartNumber: CNBTR4822   |   Asin: B01EUXS6KS

Specification:
Color: Silver
Material: 45 Steel
Teeth number: 20
Modulus: 1.5
Inner Diamter: 8mm/0.31"
Maximum Outer Diameter: 31.6mm/1.24"
Total Thickness: 22mm/0.87"
Base Diamater: 22mm/0.87
Total Size: 31.6x22mm/1.24x0.87"(ODxT)
Weight: 150g

Feature:
1. 1.5Modulus, 20 teeth, 8mm hole diameter.
2. Made of 45 steel with high wear-resistance, long service life.
3. Used widely in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.
Note:
1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth.

Package Include:
2 x Tapered Bevel Gear Wheel
1 x L Type Hexagonal Wrench

Features

  • Made of 45 steel with high wear-resistance, strong and durable.
  • Tapered Bevel Gear Wheel, 1.5 Modulus, 20 teeth, 8mm hole diameter.
  • Used widely in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.
  • See more on Amazon...

Brand: CNBTR    |   Manufacturer: yqltd

Package Dimensions: 0.6 x 1.8 x 3.4 inches (1.5 x 4.6 x 8.6 cm)

Amazon Price: $11.36 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $11.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

CNBTR Bevel Miter Gear 90 Degrees Tapered 2 Module 20 Teeth 8mm Hole Dia Wheel Pack of 2

Model: M6180313015   |    Mpn: M6180313015   |    PartNumber: M6180313015   |   Asin: B07BHGY5JD

Specifications:
Material: 45 # steel
Color:Silver+Black
Modulus: 2 mode
Number of teeth: 20T
Hole Dia: 8mm/0.31 inch
Height: 27mm/1.06 inch
The largest outside diameter: 42mm/16.53 inch
Fixed way: M5 screw side fixed
Brand name: CNBTR
Weight:299 g

Features:
1.Lower contact ratio between gears, higher load capacity.
2.It only can fit for 2 module gear,20 teeth,90 degrees,Hole Dia 8mm.
3.Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth)
4.Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc.
5.Made of 45# steel, high wear-resistance,longtime use.

Package include:
2 x bevel gears wheel

The unique MPN label on each inner package, which confirm it passed the quality inspection and it is genuine item sold from our shop. Please offer it to us when you need assistance.

Features

  • It only can fit for 2 module gear,20 teeth,90 degrees,Hole Dia 8mm
  • Lower contact ratio between gears, higher load capacity.
  • Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc.
  • Made of 45# steel, high wear-resistance,longtime use.
  • Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth)
  • See more on Amazon...

Brand: CNBTR    |   Manufacturer: yqltd

Package Dimensions: 1.25 x 1.7 x 3.2 inches (3.2 x 4.3 x 8.1 cm)

Amazon Price: $12.55 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $12.55

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Boston Gear PA528Y-P Bevel Pinion Gear, 2:1 Ratio, 0.875" Bore, 8 Pitch, 20 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

Model: PA528YP   |    Mpn: PA528YP   |    Ean: 0781711124260   |    PartNumber: PA528YP   |   Asin: B004N62RGC

This Boston Gear PA528Y-P bevel pinion gear has an 8 diametral pitch, 20 steel teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with a PA528Y-G bevel gear for applications requiring a 2:1 gear ratio. It has a 0.875" bore diameter, is made of low carbon steel (0.2 percent carbon), and has unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.

Features

  • 20 teeth for use with PA528Y-G mating bevel gear in 2:1 gear ratio applications
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 4.1 x 4.1 x 4.3 inches (10.4 x 10.4 x 10.9 cm)

Amazon Price: $73.90 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $73.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250" Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

Model: G485YG   |    Mpn: G485YG   |    Ean: 0781711121245   |    PartNumber: G485YG   |   Asin: B004N62R2G

This Boston Gear G485Y-G bevel gear is made of brass, has a straight bevel, a 24 diametral pitch, 36 teeth, and a keyway to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with a G485Y-P bevel pinion gear for applications requiring a 2:1 gear ratio. It has a keyway and setscrew for use with a 0.250" diameter keyed shaft (not included), is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability, and has unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating pinion gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.

Features

  • 36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 2 x 2.1 x 2.7 inches (5.1 x 5.3 x 6.9 cm)

Amazon Price: $31.00 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $31.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Boston Gear G485Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188" Bore, 24 Pitch, 18 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

Model: G485YP   |    Mpn: G485YP   |    Ean: 0781711121221   |    PartNumber: G485YP   |   Asin: B004N62R1W

This Boston Gear G485Y-P bevel pinion gear is made of brass, has a straight bevel, a 24 diametral pitch, 18 teeth, and a keyway to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with a G485Y-G bevel gear for applications requiring a 2:1 gear ratio. It has a keyway and setscrew for use with a 0.188" diameter keyed shaft (not included), is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability, and has unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.

Features

  • 18 teeth for use with G485Y-G mating bevel gear in 2:1 gear ratio applications
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 0.5 x 1 x 1 inches (1.3 x 2.5 x 2.5 cm)

Amazon Price: $26.24 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $26.61

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Boston Gear PA4416Y-P Bevel Pinion Gear, 4:1 Ratio, 0.500" Bore, 16 Pitch, 16 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

Model: PA4416YP   |    Mpn: PA4416YP   |    Ean: 0781711124949   |    PartNumber: PA4416YP   |   Asin: B004N62RRG

This Boston Gear PA4416Y-P bevel pinion gear has a 16 diametral pitch, 16 steel teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with a PA4416Y-G bevel gear for applications requiring a 4:1 gear ratio. It has a 0.500" bore diameter, is made of low carbon steel (0.2 percent carbon), and has unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.

Features

  • 16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 2 x 2.1 x 2.6 inches (5.1 x 5.3 x 6.6 cm)

Amazon Price: $22.90 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 1 to 2 months
List Price: $22.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Boston Gear PA4416Y-G Bevel Gear, 4:1 Ratio, 0.625" Bore, 16 Pitch, 64 Teeth, 20 Degree Pressure Angle, Straight Bevel, Cast Iron

Model: PA4416YG   |    Mpn: PA4416YG   |    Ean: 0781711124925   |    PartNumber: PA4416YG   |   Asin: B004N62RQW

This Boston Gear PA4416Y-G bevel gear is made of cast iron, has a 16 diametral pitch, 64 teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with a PA4416Y-P bevel pinion gear for applications requiring a 4:1 gear ratio. It has a 0.625" bore diameter, is made of ASTM A48 Class 30 gray cast iron for resistance to wear, corrosion, and galling, and has unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating pinion gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.

Features

  • 64 teeth for use with PA4416Y-P mating bevel gear in 4:1 gear ratio applications
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • ASTM A48 Class 30 gray cast iron for resistance to wear, corrosion, and galling
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 4.2 x 4.2 x 4.3 inches (10.7 x 10.7 x 10.9 cm)

Amazon Price: $85.90 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $85.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Boston Gear HLK105YA Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 1.000" Bore, 8 Pitch, 24 Teeth, Steel

 Ean: 0781711123621   |    PartNumber: HLK105YA   |   Asin: B004N62ZV4

This steel Boston Gear HLK series miter gear has a 20 degree pressure angle (PA) and a straight miter to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This gear has a keyway and setscrew for use with a keyed shaft, is made of low carbon steel (.2 percent carbon), and has hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a 14.5 degree pressure angle, resulting in higher load capacity. This gear is intended for use only with identical gears because miter gears can mesh only with gears that have the same pressure angle, number of teeth, and diametral pitch (number of teeth per inch). This Boston Gear miter gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Miter gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A miter gear's pressure angle (PA), spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider when purchasing. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures a variety of gear drives, variable speed drives, clutches, and the components that comprise these systems including sprockets and bearings. Their manufacturing designs, production, and inspection meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1877, is headquartered in Charlotte, NC.

Features

  • Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion
  • Bore has keyway and setscrew for use with keyed shaft
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 4.2 x 4.2 x 4.3 inches (10.7 x 10.7 x 10.9 cm)

Amazon Price: $80.30 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $80.30

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2

Model: M6180313012   |    Mpn: M6180313012   |    PartNumber: M6180313012   |   Asin: B07BHK35NZ

Specifications:
Teeth: 16 teeth
Hole diameter: 12mm
Height: 18mm
The biggest diameter: 26mm
Material:45# steel
Color:Silver Black
Brand name: CNBTR
Size: 2.6x1.8cm/1.02x0.71 inch(Dia x H)
Weight: 51g

Features:
1.Lower contact ratio between gears, higher load capacity.
2.It only can fit for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter.
3.Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth)
4.Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc.
5.Made of 45# steel with high wear-resistance,strong and durable.

Package include:
2 x bevel gears wheel

The unique MPN label on each inner package, which confirm it passed the quality inspection and it is genuine item sold from our shop. Please offer it to us when you need assistance.

Features

  • Made of 45# steel with high wear-resistance,strong and durable.
  • Lower contact ratio between gears, higher load capacity.
  • It only can fit for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter.
  • Suitable for used in agricultural equipment, textile machinery, printing machinery, Mechanical transmission, etc.
  • Note:1 to 1 bevel gear (only 1 to 1 match, can not match with other modules and other number of teeth)
  • See more on Amazon...

Brand: CNBTR    |   Manufacturer: yqltd

Package Dimensions: 1.02 x 2.76 x 4.21 inches (2.6 x 7.0 x 10.7 cm)

Amazon Price: $9.51 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $9.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

CHENGYIDA 40-PACK Plastic Bevel Gear Right Angle Drive Plastic Gears 16T Hole 2mm Toy DIY

 PartNumber: CYD00706   |   Asin: B015LYFOCI

Features

  • Material: Plastic
  • Model Number: Aperture: 2MM (with 2 mm shaft fit)
  • Four-wheel Drive Attributes: Bevel gear
  • Use: Vehicles & Remote Control Toys
  • Qty : 40 pcs
  • See more on Amazon...

Brand: CHENGYIDA   |   Manufacturer: Shenzhen Chengyida E-Commerce Co., Ltd,

Amazon Price: $14.53 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 1-2 business days
List Price: $14.53

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Boston Gear L149Y-P Bevel Pinion Gear, 2:1 Ratio, 0.375" Bore, 16 Pitch, 16 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

Model: L149YP   |    Mpn: L149YP   |    Ean: 0781711122440   |    PartNumber: L149YP   |   Asin: B004N62R80

This Boston Gear L149Y-P bevel pinion gear has a 16 diametral pitch, 16 steel teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with an L149Y-G bevel gear for applications requiring a 2:1 gear ratio. It has a 0.375" bore diameter, is made of low carbon steel (0.2 percent carbon), and has unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.

Features

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 1.9 x 2.1 x 2.6 inches (4.8 x 5.3 x 6.6 cm)

Amazon Price: $23.20 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $23.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

2PCS 2 Modulus 19mm Hole Diameter Silver 20 Teeth 45# Steel Tapered Bevel Gear Wheel Top Screws 90 Drive

 Ean: 0765756678926   |    PartNumber: Wanpako 180915015   |   Asin: B07HD2ZP6H

Feature 1.1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth. 2.Lower contact ratio between gears, higher load capacity. 3.Made of 45 steel with high wear-resistance, strong and durable. 4.Widely used in hardware, molds, mechanical transmission, ect. Colour:Silver 5.The fixed way is M34 screw side fixation. Material:45# steel Package include: 2 x Tapered Bevel Gear Wheel Size:1.9cm/0.74(Dia) Number of teeth: 20T Aperture: 19mm Height: 27mm Maximum outer diameter: 42mm

Features

  • Widely used in hardware, molds, mechanical transmission, ect.
  • Made of 45 steel with high wear-resistance, strong and durable.
  • Lower contact ratio between gears, higher load capacity.
  • 1:1 bevel gear wheel can only used with 1:2 gear wheel, and can not match the other modulus of teeth.
  • The fixed way is M35 screw side fixation.
  • See more on Amazon...

Brand: Wanpako Tapered Bevel Gear Wheel   |   Manufacturer: Wanpako

Amazon Price: $14.97 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 1-2 business days
List Price: $14.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Uxcell a13110100ux0401 0.31" Pinion Shaft Diameter Angle Grinder Spiral Bevel Gear Parts, Steel

Model: a13110100ux0401   |    Mpn: a13110100ux0401   |    Ean: 0700724628886   |    PartNumber: a13110100ux0401   |   Asin: B00HR6KQPE

Made of metal, feature spiral teeth. Bevel gears are useful when the direction of a shaft's rotation needs to be changed. Great replacement for the Bosch gws 6-100 angle grinder broken gear wheel, non-oem product.

Features

  • Product name: spiral bevel gear set; material: metals
  • Ring Gear Size : 45 x 15mm/ 1.9 x 0.59(Dia*Max.T);Fit for Shaft Diameter : 10mm/ 0.4
  • Pinion Gear Size : 18 x 13mm/ 0.708 x 0.12(Dia*Max.T);Fit for Pinion Shaft Diameter : 8mm/ 0.31
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 0.16 x 2.52 x 3.23 inches (0.4 x 6.4 x 8.2 cm)

First Available: 2017-11-25

Amazon Price: $5.22 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $8.91

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Boston Gear L110Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.375" Bore, 1.062" Mounting Distance, 16 Pitch, 16 Teeth, Steel

Model: L110Y   |    Mpn: L110Y   |    Ean: 0781711121740   |    PartNumber: L110Y   |   Asin: B000L9QRTS

This steel Boston Gear L series miter gear has a 20 degree pressure angle (PA) and a straight miter to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This gear has a plain bore, is made of low carbon steel (.2 percent carbon), and has unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a 14.5 degree pressure angle, resulting in higher load capacity. This gear is intended for use only with identical gears because miter gears can mesh only with gears that have the same pressure angle, number of teeth, and diametral pitch (number of teeth per inch). This Boston Gear miter gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Miter gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A miter gear's pressure angle (PA), spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider when purchasing. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures a variety of gear drives, variable speed drives, clutches, and the components that comprise these systems including sprockets and bearings. Their manufacturing designs, production, and inspection meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1877, is headquartered in Charlotte, NC.

Features

  • Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 2.1 x 2.1 x 2.6 inches (5.3 x 5.3 x 6.6 cm)

Amazon Price: $26.54 | as of 01/22/2019(2:47am pst)
Availibility:
List Price: $19.10

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Boston Gear HLK101Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.500" Bore, 12 Pitch, 15 Teeth, Steel

 Ean: 0781711123287   |    PartNumber: HLK101Y   |   Asin: B004N62ZRI

This steel Boston Gear HLK series miter gear has a 20 degree pressure angle (PA) and a straight miter to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This gear has a keyway and setscrew for use with a keyed shaft, is made of low carbon steel (.2 percent carbon), and has hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a 14.5 degree pressure angle, resulting in higher load capacity. This gear is intended for use only with identical gears because miter gears can mesh only with gears that have the same pressure angle, number of teeth, and diametral pitch (number of teeth per inch). This Boston Gear miter gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Miter gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A miter gear's pressure angle (PA), spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider when purchasing. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures a variety of gear drives, variable speed drives, clutches, and the components that comprise these systems including sprockets and bearings. Their manufacturing designs, production, and inspection meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1877, is headquartered in Charlotte, NC.

Features

  • Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion
  • Bore has keyway and setscrew for use with keyed shaft
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 1.9 x 2.1 x 2.6 inches (4.8 x 5.3 x 6.6 cm)

Amazon Price: $35.60 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $35.60 | Used Price: $11.64

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Makita 227505-7 37 Spiral Bevel Gear

Model: 227505-7   |    Mpn: 227505-7   |    PartNumber: 227505-7   |   Asin: B010BFCEX4

This is an O.E.M. authorized part. Fits various Makita models. OEM Part Number 227505-7. Made in United states.

Features

  • This is an O.E.M. authorized part
  • Fits various Makita models
  • OEM Part Number 227505-7
  • This is a Makita replacement part
  • Part Number 227505-7
  • This is an O.E.M. part
  • See more on Amazon...

Brand: Makita   |   Manufacturer: Makita

Item Dimensions: 3 x 5 x 7 inches (7.6 x 12.7 x 17.8 cm)   |   Package Dimensions: 1.02 x 4.02 x 6.22 inches (2.6 x 10.2 x 15.8 cm)

Amazon Price: $7.02 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 2-3 business days
List Price: $7.02

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Boston Gear PA3212Y-P Bevel Pinion Gear, 2:1 Ratio, 0.500" Bore, 12 Pitch, 18 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

Model: PA3212YP   |    Mpn: PA3212YP   |    Ean: 0781711124826   |    PartNumber: PA3212YP   |   Asin: B004N62ROY

This Boston Gear PA3212Y-P bevel pinion gear has a 12 diametral pitch, 18 steel teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with a PA3212Y-G bevel gear for applications requiring a 2:1 gear ratio. It has a 0.500" bore diameter, is made of low carbon steel (0.2 percent carbon), and has unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.

Features

  • 18 teeth for use with PA3212Y-G mating bevel gear in 2:1 gear ratio applications
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 2 x 2.1 x 2.6 inches (5.1 x 5.3 x 6.6 cm)

Amazon Price: $34.84 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $64.82

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Boston Gear L147Y-G Bevel Gear, 2:1 Ratio, 0.375" Bore, 20 Pitch, 20 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

Model: L147YG   |    Mpn: L147YG   |    Ean: 0781711122341   |    PartNumber: L147YG   |   Asin: B004N62R5I

This Boston Gear L147Y-G bevel gear has a 20 diametral pitch, 20 steel teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with an L147Y-P bevel pinion gear for applications requiring a 2:1 gear ratio. It has a 0.375" bore diameter, is made of low carbon steel (0.2 percent carbon), and has unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating pinion gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.

Features

  • 20 teeth for use with L147Y-P mating bevel gear in 2:1 gear ratio applications
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 1.2 x 2.4 x 3.6 inches (3.0 x 6.1 x 9.1 cm)

Amazon Price: $33.10 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $33.10

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Boston Gear L147Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188" Bore, 20 Pitch, 10 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

Model: L147YP   |    Mpn: L147YP   |    Ean: 0781711122365   |    PartNumber: L147YP   |   Asin: B004N62R5S

This Boston Gear L147Y-P bevel pinion gear has a 20 diametral pitch, 10 steel teeth, and a straight bevel to transmit torque between perpendicular shafts to provide rotational power to another part of a motorized system. This bevel gear is intended for use with an L147Y-G bevel gear for applications requiring a 2:1 gear ratio. It has a 0.188" bore diameter, is made of low carbon steel (0.2 percent carbon), and has unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion. The 20 degree pressure angle provides a lower contact ratio between gears than a smaller pressure angle, resulting in higher load capacity. This gear is used only with its mating gear because bevel gears can mesh only with gears that have the same pressure angle, spiral angle, and diametral pitch (that is, the number of teeth per inch). This Boston Gear bevel gear is suitable for use in a variety of commercial and industrial applications, such as construction equipment, aeronautics, conveyors, and manufacturing equipment, among others.

Bevel gears have a blunt-end cone shape with teeth along the cone face and are used for transmitting torque and motion between perpendicular rotating shafts. A bevel gear's pressure angle, spiral angle, diametral pitch (also called DP or pitch), and its material are important factors to consider. A bevel gear is part of a set of two gears, and the gear ratio for the set is determined by the number of teeth on each gear. Gears come in several types for use in different power transmission configurations and for different applications, including spur gears (for rotating shafts parallel to each other), change gears (to increase or decrease torque and speed), helical gears (for high rates of rotational speed), internal gears (where one gear is nested inside the other), rack and pinion gears (for turning rotational motion into linear motion), and worm gears (for perpendicular shafts in tight spaces and quiet operation). Gears are suitable for use in the agriculture, automotive, construction, mining, and packaging industries, and can be found in a variety of machines, including bicycles, automobiles, and elevators, among others.

Boston Gear manufactures gears, gear drives, bearings, valves, shaft collars, couplings, and other power and fluid transmission components. The company, founded in 1877, is headquartered in Charlotte, NC, and meets International Organization for Standardization (ISO) standard 9001:2008 standard.

Features

  • 10 teeth for use with L147Y-G mating bevel gear in 2:1 gear ratio applications
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion
  • See more on Amazon...

Brand: Boston Gear   |   Manufacturer: Boston Gear

Package Dimensions: 0.2 x 2.5 x 2.7 inches (0.5 x 6.4 x 6.9 cm)

Amazon Price: $25.70 | as of 01/22/2019(2:47am pst)
Availibility: Usually ships in 24 hours
List Price: $25.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2
  2. CNBTR Bevel Miter Gear 90 Degrees Tapered 2 Module 20 Teeth 8mm Hole Dia Wheel Pack of 2
  3. Boston Gear PA528Y-P Bevel Pinion Gear, 2:1 Ratio, 0.875" Bore, 8 Pitch, 20 Teeth, 20 Degree Pressur...
  4. Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250" Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle...
  5. Boston Gear G485Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188" Bore, 24 Pitch, 18 Teeth, 20 Degree Pressur...
  6. Boston Gear PA4416Y-P Bevel Pinion Gear, 4:1 Ratio, 0.500" Bore, 16 Pitch, 16 Teeth, 20 Degree Press...
  7. Boston Gear PA4416Y-G Bevel Gear, 4:1 Ratio, 0.625" Bore, 16 Pitch, 64 Teeth, 20 Degree Pressure Ang...
  8. Boston Gear HLK105YA Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 1.000" Bore, 8 Pitch, 24 Teeth...
  9. CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2
  10. CHENGYIDA 40-PACK Plastic Bevel Gear Right Angle Drive Plastic Gears 16T Hole 2mm Toy DIY

Most Wished For

  1. CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2
  2. CNBTR Bevel Miter Gear 90 Degrees Tapered 2 Module 20 Teeth 8mm Hole Dia Wheel Pack of 2
  3. Boston Gear PA528Y-P Bevel Pinion Gear, 2:1 Ratio, 0.875" Bore, 8 Pitch, 20 Teeth, 20 Degree Pressur...
  4. Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250" Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle...
  5. Boston Gear G485Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188" Bore, 24 Pitch, 18 Teeth, 20 Degree Pressur...
  6. Boston Gear PA4416Y-P Bevel Pinion Gear, 4:1 Ratio, 0.500" Bore, 16 Pitch, 16 Teeth, 20 Degree Press...
  7. Boston Gear PA4416Y-G Bevel Gear, 4:1 Ratio, 0.625" Bore, 16 Pitch, 64 Teeth, 20 Degree Pressure Ang...
  8. Boston Gear HLK105YA Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 1.000" Bore, 8 Pitch, 24 Teeth...
  9. CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2
  10. CHENGYIDA 40-PACK Plastic Bevel Gear Right Angle Drive Plastic Gears 16T Hole 2mm Toy DIY

Most Gifted

  1. CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2
  2. CNBTR Bevel Miter Gear 90 Degrees Tapered 2 Module 20 Teeth 8mm Hole Dia Wheel Pack of 2
  3. Boston Gear PA528Y-P Bevel Pinion Gear, 2:1 Ratio, 0.875" Bore, 8 Pitch, 20 Teeth, 20 Degree Pressur...
  4. Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250" Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle...
  5. Boston Gear G485Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188" Bore, 24 Pitch, 18 Teeth, 20 Degree Pressur...
  6. Boston Gear PA4416Y-P Bevel Pinion Gear, 4:1 Ratio, 0.500" Bore, 16 Pitch, 16 Teeth, 20 Degree Press...
  7. Boston Gear PA4416Y-G Bevel Gear, 4:1 Ratio, 0.625" Bore, 16 Pitch, 64 Teeth, 20 Degree Pressure Ang...
  8. Boston Gear HLK105YA Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 1.000" Bore, 8 Pitch, 24 Teeth...
  9. CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2
  10. CHENGYIDA 40-PACK Plastic Bevel Gear Right Angle Drive Plastic Gears 16T Hole 2mm Toy DIY

Top Selling

  1. CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20 Teeth Pack of 2
  2. CNBTR Bevel Miter Gear 90 Degrees Tapered 2 Module 20 Teeth 8mm Hole Dia Wheel Pack of 2
  3. Boston Gear PA528Y-P Bevel Pinion Gear, 2:1 Ratio, 0.875" Bore, 8 Pitch, 20 Teeth, 20 Degree Pressur...
  4. Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250" Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle...
  5. Boston Gear G485Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188" Bore, 24 Pitch, 18 Teeth, 20 Degree Pressur...
  6. Boston Gear PA4416Y-P Bevel Pinion Gear, 4:1 Ratio, 0.500" Bore, 16 Pitch, 16 Teeth, 20 Degree Press...
  7. Boston Gear PA4416Y-G Bevel Gear, 4:1 Ratio, 0.625" Bore, 16 Pitch, 64 Teeth, 20 Degree Pressure Ang...
  8. Boston Gear HLK105YA Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 1.000" Bore, 8 Pitch, 24 Teeth...
  9. CNBTR Tapered Bevel Pinion Gear 12mm Hole Diameter 45# Steel 1.5 Module 16 Teeth Pack of 2
  10. CHENGYIDA 40-PACK Plastic Bevel Gear Right Angle Drive Plastic Gears 16T Hole 2mm Toy DIY



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.