Frontpage > Industrial > Power Transmission > Cylindrical Roller Bearings

Best Cylindrical Roller Bearings - Buying Guide

Last Updated: 05/20/2019

Share on

Bestselling Cylindrical Roller Bearings on Amazon

  1. FAG NJ205E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Flan...
  2. URB NU205 EC3 Cylindrical Roller Bearing, Pressed Steel Cage, 25 mm ID x 52 mm OD x 15 mm Width
  3. Timken R1581TV Pinion Bearing
  4. WJB WBMA1206EF WBMA1206EF-Rear Wheel Cylindrical Roller Bearing-Cross Reference: National Timken MA1...
  5. uxcell AXK3047+2AS Needle Roller Thrust Bearings with 2 Washers, 30mm Inner Diameter, 47mm OD, 2mm o...
  6. FAG NU306E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Ca...
  7. Sealmaster ER-26 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/8" B...
  8. Sealmaster ER-21 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/16" ...
  9. Sealmaster ER-24 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-1/2" B...
  10. NU206 Cylindrical Roller Bearing 30x62x16 mm, Steel Cage, Open

  #1

FAG NJ205E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Flanged, High Capacity, Polyamide/Nylon Cage, C3 Clearance, Metric, 25mm ID, 52mm OD, 15mm Width

Model: NJ205-E-TVP2-C3   |    Mpn: NJ205-E-TVP2-C3   |    Ean: 4012801176545   |    PartNumber: NJ205-E-TVP2-C3   |   Asin: B00631ATBU

This FAG single row cylindrical roller bearing with a glass fiber reinforced polyamide cage and removable inner ring is suitable for applications that support high radial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than CN (normal) and the press fit inner and outer rings can withstand a large temperature differential. This clearance allows for thermal expansion as the bearing supports radial loads and its cylindrical rollers reduce rotational friction. This cylindrical roller bearing can support heavier loads than bearings with comparable-sized ball bearings because the cylindrical shape of the rollers provides more surface area for distributing the load, and it also has a larger roller set than the standard roller design. This cylindrical roller bearing can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and cylindrical rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The bearing is semi-locating, with two ribs on the interior circumference of the outer ring and one rib on the exterior circumference of the inner ring, for supporting axial forces in one direction. The glass fiber reinforced polyamide (PA66) cage prevents the rollers from coming into contact with each other during use to reduce friction, vibrations, and noise, and it weighs less and is quieter than cages made of brass. A removable inner ring in the open bearing allows for lubrication. This cylindrical bearing is for use in a broad range of applications where high radial loads are present, such as in conveyer belts, traction motors, railway car axle boxes, and oilfield mud pumps, among others.

Specifications Main bearing dimensions DIN 5412-1 Basic dynamic load ratings DIN ISO 281 C3 radial internal clearance DIN 620-4 (ISO 5 753) Shaft and housing tolerances ISO 286 Through-hardening steel for inner and outer rings ISO 683-17 System for creating part numbers for rolling bearings DIN 623-1 Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut f r Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Features

  • Single row cylindrical roller bearing for applications that support high radial loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
  • Semi-locating bearing (two ribs on the outer ring, one rib on the inner ring) for supporting axial forces in one direction
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages
  • Removable inner ring in open bearing allows for lubrication in place
  • See more on Amazon...

Brand: FAG Bearings   |   Manufacturer: Schaeffler Technologies Co.

Item Dimensions: 2.05 x 0.59 x 0.98 inches (5.2 x 1.5 x 2.5 cm)   |   Package Dimensions: 0.6 x 2.3 x 2.3 inches (1.5 x 5.8 x 5.8 cm)

First Available: 2017-12-12

Amazon Price: $37.56 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 1 to 2 months
List Price: $50.04

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

URB NU205 EC3 Cylindrical Roller Bearing, Pressed Steel Cage, 25 mm ID x 52 mm OD x 15 mm Width

Model: URB NU205 EC3   |    Mpn: NU205 EC3   |    Ean: 0848701007351   |    PartNumber: NU205 EC3   |   Asin: B01485U57K

Cylindrical Roller Bearing.

Features

  • Bearing has a pressed steel cage
  • Bearing has a straight separable inner race without flanges
  • Bearing has increased basic static and dynamic load ratings
  • See more on Amazon...

Brand: URB   |   Manufacturer: URB

Package Dimensions: 1 x 2.25 x 2.25 inches (2.5 x 5.7 x 5.7 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Timken R1581TV Pinion Bearing

Model: R1581TV   |    Mpn: R1581TV   |    Ean: 0053893414430   |    PartNumber: R1581TV   |   Asin: B000BZ52KM

Timken Pinion Bearings convert rotational motion into linear motion which enables the vehicle to run forward and backward. These bearings significantly increase fuel economy and reduce power consumption. They have superior service life and are manufactured using world-class standards, ensuring long lasting durability.

Features

  • Increases fuel economy
  • Reduces power consumption and friction
  • Ensures long lasting durability
  • Enables the pinion to run smoothly
  • Designed to ensure that it fits properly
  • See more on Amazon...

Brand: Timken   |   Manufacturer: Timken

Item Dimensions: 1 x 2.3 x 2.3 inches (2.5 x 5.8 x 5.8 cm)   |   Package Dimensions: 0.8 x 2.3 x 2.4 inches (2.0 x 5.8 x 6.1 cm)

Amazon Price: $21.67 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 1-2 business days
List Price: $26.26

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

WJB WBMA1206EF WBMA1206EF-Rear Wheel Cylindrical Roller Bearing-Cross Reference: National Timken MA1206EF / SKF MA1206-UV

Model: WBMA1206EF   |    Mpn: WBMA1206EF   |    Ean: 0789120024829   |    PartNumber: WBMA1206EF   |   Asin: B075STRXTR

[b]IMPORTANT FITMENT NOTES:[/b] To ensure the correct fitment between the part and your vehicle, please verify the Vehicle Fitment by entering your Vehicle's Year Make Model into Amazon's Parts Finder. In some cases, you need to match beyond year, make, model, and position, to see if there is any specific attribute like Drive Type, ABS Type or other notes in the Vehicle Fitment Details. [/br] [b]ISO/TS 16949[/b] [/br] [b]Warranty:[/b] WJB is a trusted brand in the automotive aftermarket and WJB products are manufactured through ISO certified facilities with rigorous manufacturing processes. This product is warrantied for 12 months to cover any manufacturer defects. Defective units can be replaced by WJB for up to 12 Months after the date of purchase. 12 Months Warranty, Part Replacement Only. Labor and/or any shipping costs are not covered.

Features

  • Reduced noise for smoother Performance
  • All Bearings are engineered and tested to OE specifications
  • WJB Bearings are Easy to Install and require Minimal Maintenance
  • Increases Durability and Improves Performance
  • (Where applicable) Improved Sealing Design keeps contamination out for Longer Bearing Life
  • See more on Amazon...

Brand: WJB   |   Manufacturer: WJB

Item Dimensions: 0.75 x 2.56 x 2.56 inches (1.9 x 6.5 x 6.5 cm)   |   Package Dimensions: 1.06 x 3.54 x 3.62 inches (2.7 x 9.0 x 9.2 cm)

First Available: 2017-09-20

Amazon Price: $15.67 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 24 hours
List Price: $15.88

Warranty: 12 Month

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

uxcell AXK3047+2AS Needle Roller Thrust Bearings with 2 Washers, 30mm Inner Diameter, 47mm OD, 2mm of Thickness, GCr15 Hardness

 PartNumber: a18121800ux0581   |   Asin: B07PDZ6P3W

1.This Uxcell Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces. 2.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly. 3.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways. 4.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways. 5.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others. Specification: Bearing MODEL: AXK3047 with 2 Washaers Needle Roller Meterial: Chromium Steel (GCr15) Cage Meterial: ST13 Steel Bearing Washer Meterial: 65Mn Spring Steel Inner Diameter : 30mm Outside Diameter (D): 47mm Total Thickness: 4mm Dynamic Load Capacity (Cr): 11.2kN Static Load Capacity (Cor): 35.5kN Maximum Rotational Speed (Oil): 11000rpm Total Weight: 23g Package Content: 1 Pcs

Features

  • AXK3047. Size: 30mm Inner Diameter, 47mm Outside Diameter, 2mm Thickness
  • Needle Roller Thrust Bearings is designed to support high axial loads (i.e. loads parallel to the shaft)
  • High-grade rollers with fitted retainers, ensure the performance of less friction, vibration, and noise.
  • Through-hardened, chromium steel rollers for heat tolerance and durability under heavy loads
  • Application. For fixing or rebuilding your milling machine, lathe or other equipments.
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Amazon Price: $5.88 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 24 hours
List Price: $5.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

FAG NU306E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Capacity, Polyamide Cage, Normal Clearance, 30mm ID, 72mm OD, 19mm Width

Model: NU306-E-TVP2   |    Mpn: NU306-E-TVP2   |    Ean: 4012801179720   |    PartNumber: NU306-E-TVP2   |   Asin: B007MF88OQ

This FAG cylindrical roller bearing with a polyamide cage and removable inner ring is suitable for applications that support high radial loads. This roller bearing has a CN (normal) radial clearance for applications and operating conditions with normal shaft and housing tolerances where thermal expansion is not a factor. This is a single row roller bearing that supports high radial loads with low friction. A removable inner ring in the open bearing allows application of lubrication. This roller bearing is measured in metric units for industry cross-matching and parts consistency.

Cylindrical roller bearings are used in applications where high radial loads are present such as in conveyer belts, traction motors, railway car axle boxes, and oilfield mud pumps, among others.

Roller or rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. They are usually composed of two rings, rolling bodies (such as bearings or cylinders), and a cage to house the parts. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Rolling bearings can be open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut f r Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Features

  • FAG cylindrical roller bearing with polyamide cage and removable inner ring suitable for high radial loads
  • CN (normal) radial clearance for applications where thermal expansion is not a factor
  • Single row roller bearing for high radial loads with low friction
  • Removable inner ring in open bearing allows for lubrication in place
  • Metric unit measurements for industry consistency
  • See more on Amazon...

Brand: FAG Bearings   |   Manufacturer: Schaeffler Technologies Co.

Item Dimensions: 2.83 x 0.75 x 1.18 inches (7.2 x 1.9 x 3.0 cm)   |   

Amazon Price: $51.90 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 2-3 business days
List Price: $80.23

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Sealmaster ER-26 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/8" Bore, 85 mm OD, 1-15/16" Width

 Ean: 0662461008690   |    PartNumber: ER-26   |   Asin: B008FCMVQG

This Sealmaster ER Series ball bearing insert with setscrew locking collar and felt seals is suitable for use in mounted bearing housings to carry shafts with radial or radial and thrust loads, such as in material handling. The outer bearing surface has a snap ring that sits in a groove to locate the insert within its housing. This bearing insert is made from ASTM International 52100 high carbon steel and its rings are coated with black oxide for corrosion resistance. The bearing insert has a heat treated inner race for wear resistance and an outer race with a brass land riding retainer that spaces the ball bearings for even load distribution and prevents contact to reduce friction, vibration, and noise. Lubrication grooves and oil holes in the outer bearing ring feed lubrication through the bearing and a tapered race profile allows lubricant to more easily flow back into the raceway. A collar extends from the bearing inner ring and setscrews lock the collar and bearing onto the shaft. This bearing allows self-realignment and compensates for static and dynamic alignment errors, has an operating temperature range of -20 to 220 degrees F, and has low friction felt and flinger seals to retain lubricant and protect against contamination that would shorten the bearing life. This ball bearing insert is suitable for use in material handling applications, such as in conveyors.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Ball bearing insert for carrying shafts with radial or radial and thrust loads
  • High carbon steel rings with protective coating for corrosion resistance
  • Snap ring in outer bearing surface to locate insert within housing
  • Setscrew locking collar for secure attachment to shaft
  • Felt and flinger seals to protect against contaminants and retain lubrication
  • See more on Amazon...

Brand: Sealmaster   |   Manufacturer: Regal

Package Dimensions: 1.9 x 3.7 x 3.9 inches (4.8 x 9.4 x 9.9 cm)

Amazon Price: $105.64 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 24 hours
List Price: $142.93

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Sealmaster ER-21 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/16" Bore, 72 mm OD, 1-11/16" Width

 Ean: 0662461008638   |    PartNumber: ER-21   |   Asin: B008FCMS0U

This Sealmaster ER Series ball bearing insert with setscrew locking collar and felt seals is suitable for use in mounted bearing housings to carry shafts with radial or radial and thrust loads, such as in material handling. The outer bearing surface has a snap ring that sits in a groove to locate the insert within its housing. This bearing insert is made from ASTM International 52100 high carbon steel and its rings are coated with black oxide for corrosion resistance. The bearing insert has a heat treated inner race for wear resistance and an outer race with a brass land riding retainer that spaces the ball bearings for even load distribution and prevents contact to reduce friction, vibration, and noise. Lubrication grooves and oil holes in the outer bearing ring feed lubrication through the bearing and a tapered race profile allows lubricant to more easily flow back into the raceway. A collar extends from the bearing inner ring and setscrews lock the collar and bearing onto the shaft. This bearing allows self-realignment and compensates for static and dynamic alignment errors, has an operating temperature range of -20 to 220 degrees F, and has low friction felt and flinger seals to retain lubricant and protect against contamination that would shorten the bearing life. This ball bearing insert is suitable for use in material handling applications, such as in conveyors.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Ball bearing insert for carrying shafts with radial or radial and thrust loads
  • High carbon steel rings with protective coating for corrosion resistance
  • Snap ring in outer bearing surface to locate insert within housing
  • Setscrew locking collar for secure attachment to shaft
  • Felt and flinger seals to protect against contaminants and retain lubrication
  • See more on Amazon...

Brand: Sealmaster   |   Manufacturer: Regal

Package Dimensions: 1.8 x 3.1 x 3.4 inches (4.6 x 7.9 x 8.6 cm)

Amazon Price: $114.44 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 4-5 business days
List Price: $114.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Sealmaster ER-24 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-1/2" Bore, 80 mm OD, 1-15/16" Width

 Ean: 0662461008669   |    PartNumber: ER-24   |   Asin: B006KT0XBQ

This Sealmaster ER Series ball bearing insert with setscrew locking collar and felt seals is suitable for use in mounted bearing housings to carry shafts with radial or radial and thrust loads, such as in material handling. The outer bearing surface has a snap ring that sits in a groove to locate the insert within its housing. This bearing insert is made from ASTM International 52100 high carbon steel and its rings are coated with black oxide for corrosion resistance. The bearing insert has a heat treated inner race for wear resistance and an outer race with a brass land riding retainer that spaces the ball bearings for even load distribution and prevents contact to reduce friction, vibration, and noise. Lubrication grooves and oil holes in the outer bearing ring feed lubrication through the bearing and a tapered race profile allows lubricant to more easily flow back into the raceway. A collar extends from the bearing inner ring and setscrews lock the collar and bearing onto the shaft. This bearing allows self-realignment and compensates for static and dynamic alignment errors, has an operating temperature range of -20 to 220 degrees F, and has low friction felt and flinger seals to retain lubricant and protect against contamination that would shorten the bearing life. This ball bearing insert is suitable for use in material handling applications, such as in conveyors.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Ball bearing insert for carrying shafts with radial or radial and thrust loads
  • High carbon steel rings with protective coating for corrosion resistance
  • Snap ring in outer bearing surface to locate insert within housing
  • Setscrew locking collar for secure attachment to shaft
  • Felt and flinger seals to protect against contaminants and retain lubrication
  • See more on Amazon...

Brand: Sealmaster   |   Manufacturer: Regal

Item Dimensions: 2.1 x 3.8 x 3.8 inches (5.3 x 9.7 x 9.7 cm)   |   Package Dimensions: 2.2 x 3.82 x 4.02 inches (5.6 x 9.7 x 10.2 cm)

Amazon Price: $60.56 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 4-5 business days
List Price: $64.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

NU206 Cylindrical Roller Bearing 30x62x16 mm, Steel Cage, Open

 PartNumber: Kit8462   |   Asin: B002BBFC90

This VXB NU206 cylindrical roller bearing has a steel cage and removable inner ring and is unsealed. It has a 30 mm inside diameter, a 62 mm outside diameter, and a 16 mm depth. This cylindrical roller bearing can support heavier loads than bearings with comparable-sized ball bearings because the cylindrical shape of the rollers provides more surface area for distributing the load, and it also has a larger roller set than the standard roller design. The chrome steel races and bearing balls are durable and resist deformity under loads. The bearing is semi-locating, with two ribs on the interior circumference of the outer ring and one rib on the exterior circumference of the inner ring, for supporting axial forces in one direction. The steel cage prevents the rollers from coming into contact with each other during use, reducing friction, vibration, and noise. It has CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision. A removable inner ring in the open bearing allows for lubrication in place. This cylindrical bearing is for use in a broad range of applications where high radial loads are present such as in conveyer belts, traction motors, railway car axle boxes, and oilfield mud pumps, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Features

  • Single row cylindrical roller bearing for applications that support high radial loads
  • Chrome steel races and bearing balls for durability and resistance to deformity under heavy loads
  • Semi-locating bearing (two ribs on the outer ring, one rib on the inner ring) for supporting axial forces in one direction
  • Steel cage evenly spaces balls for reduced friction, vibration, and noise
  • Removable inner ring in open bearing allows for lubrication in place
  • See more on Amazon...

Brand: VXB   |   Manufacturer: VXB

Package Dimensions: 0.5 x 10.2 x 12.9 inches (1.3 x 25.9 x 32.8 cm)

Amazon Price: $39.95 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 24 hours
List Price: $24.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

FAG NU304E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Capacity, Polyamide Cage, C3 Clearance, 20mm ID, 52mm OD, 15mm Width

Model: NU304-E-TVP2-C3   |    Mpn: NU304-E-TVP2-C3   |    Ean: 4012801591157   |    PartNumber: NU304-E-TVP2-C3   |   Asin: B00631CLKC

This FAG single row cylindrical roller bearing with a glass fiber reinforced polyamide cage and removable inner ring is suitable for applications that support high radial loads and no axial loads. It has a C3 radial internal clearance designation to indicate that the radial slack between the inner and outer rings is greater than CN (normal) and the press fit inner and outer rings can withstand a large temperature differential. This clearance allows for thermal expansion as the bearing supports radial loads and its cylindrical rollers reduce rotational friction. This cylindrical roller bearing can support heavier loads than bearings with comparable-sized ball bearings because the cylindrical shape of the rollers provides more surface area for distributing the load, and it also has a larger roller set than the standard roller design. This cylindrical roller bearing can be used to a maximum operating temperature of 120 degrees C/248 degrees F. The inner and outer rings and cylindrical rollers are made of a low-alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. The bearing is non-locating, with two ribs on the interior circumference of the outer ring and no ribs on the exterior circumference of the inner ring, to allow the outer and inner rings to axially displace relative to each other from the central position. The glass fiber reinforced polyamide (PA66) cage prevents the rollers from coming into contact with each other during use to reduce friction, vibrations, and noise, and it weighs less and is quieter than cages made of brass. A removable inner ring in the open bearing allows for lubrication. This cylindrical bearing is for use in a broad range of applications where high radial loads are present, such as in conveyer belts, traction motors, railway car axle boxes, and oilfield mud pumps, among others.

Specifications Main bearing dimensions DIN 5412-1 Basic dynamic load ratings DIN ISO 281 C3 radial internal clearance DIN 620-4 (ISO 5 753) Shaft and housing tolerances ISO 286 Through-hardening steel for inner and outer rings ISO 683-17 System for creating part numbers for rolling bearings DIN 623-1 Roller bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

FAG manufactures a variety of bearings that meet International Organization for Standardization (ISO) and Deutsches Institut f r Normung (DIN) standards for quality assurance. Founded in 1883, FAG is based in Schweinfurt, Germany.

Features

  • Single row cylindrical roller bearing for applications that support high radial loads
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 120 degrees C/248 degrees F
  • Non-locating bearing (two ribs on the outer ring, none on the inner ring) for allowing outer and inner rings to axially displace relative to each other from the central position
  • Polyamide cage is lightweight and produces less noise and vibrations than brass cages
  • Removable inner ring in open bearing allows for lubrication in place
  • See more on Amazon...

Brand: FAG Bearings   |   Manufacturer: Schaeffler Technologies Co.

Item Dimensions: 2.05 x 0.59 x 0.79 inches (5.2 x 1.5 x 2.0 cm)   |   Package Dimensions: 0.4 x 1.9 x 2 inches (1.0 x 4.8 x 5.1 cm)

First Available: 2017-12-12

Amazon Price: $41.04 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 2-3 business days
List Price: $41.04

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

SL04-5005PP2NR INA New Cylindrical Roller Bearing

Model: SL045005-PP-2NR   |    Mpn: SL045005-PP-2NR   |    Ean: 0605779652452   |    PartNumber: SL045005-PP-2NR   |   Asin: B00DBO9YPO

New in Factory box - SL04-5005PP2NR INA New Cylindrical Roller Bearing

Features

Brand: INA   |   Manufacturer: INA

Package Dimensions: 6.3 x 6.3 x 6.3 inches (16.0 x 16.0 x 16.0 cm)

Amazon Price: $152.62 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 2-3 business days
List Price: $152.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Sealmaster ER-14 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 7/8" Bore, 52 mm OD, 1-3/8" Width

Model: ER-14   |    Mpn: ER-14   |    Ean: 0662461008539   |    PartNumber: ER-14   |   Asin: B006KT0VH2

This Sealmaster ER Series ball bearing insert with setscrew locking collar and felt seals is suitable for use in mounted bearing housings to carry shafts with radial or radial and thrust loads, such as in material handling. The outer bearing surface has a snap ring that sits in a groove to locate the insert within its housing. This bearing insert is made from ASTM International 52100 high carbon steel and its rings are coated with black oxide for corrosion resistance. The bearing insert has a heat treated inner race for wear resistance and an outer race with a brass land riding retainer that spaces the ball bearings for even load distribution and prevents contact to reduce friction, vibration, and noise. Lubrication grooves and oil holes in the outer bearing ring feed lubrication through the bearing and a tapered race profile allows lubricant to more easily flow back into the raceway. A collar extends from the bearing inner ring and setscrews lock the collar and bearing onto the shaft. This bearing allows self-realignment and compensates for static and dynamic alignment errors, has an operating temperature range of -20 to 220 degrees F, and has low friction felt and flinger seals to retain lubricant and protect against contamination that would shorten the bearing life. This ball bearing insert is suitable for use in material handling applications, such as in conveyors.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All roller bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Ball bearing insert for carrying shafts with radial or radial and thrust loads
  • High carbon steel rings with protective coating for corrosion resistance
  • Snap ring in outer bearing surface to locate insert within housing
  • Setscrew locking collar for secure attachment to shaft
  • Felt and flinger seals to protect against contaminants and retain lubrication
  • See more on Amazon...

Brand: Sealmaster   |   Manufacturer: Regal

Item Dimensions: 4 x 4 x 6 inches (10.2 x 10.2 x 15.2 cm)   |   Package Dimensions: 1.5 x 2.3 x 2.7 inches (3.8 x 5.8 x 6.9 cm)

Amazon Price: $21.84 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 1-2 business days
List Price: $25.05 | Used Price: $37.66

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

MR1216EB Linkbelt New Cylindrical Roller Bearing

 PartNumber: MR1216EB   |   Asin: B00DBORAN2

New in Factory box - MR1216EB Linkbelt New Cylindrical Roller Bearing

Features

Brand: Link-Belt   |   Manufacturer: Linkbelt

Amazon Price: $114.76 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 2-3 business days
List Price: $114.76

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

SKF NU-207-ECP Roller Bearing Cylindrical 35X72X17MM

Model: NU207ECP   |    Mpn: NU-207-ECP   |    PartNumber: NU-207-ECP   |   Asin: B00460HGT8

New in Factory box - NU207ECP SKF New Cylindrical Roller Bearing

Features

Brand: SKF   |   Manufacturer: SKF

Item Dimensions: 2 x 6 x 8 inches (5.1 x 15.2 x 20.3 cm)   |   

Amazon Price: $57.63 | as of 05/20/2019(3:44am pst)
Availibility: Usually ships in 24 hours
List Price: $63.22

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. FAG NJ205E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Flan...
  2. URB NU205 EC3 Cylindrical Roller Bearing, Pressed Steel Cage, 25 mm ID x 52 mm OD x 15 mm Width
  3. Timken R1581TV Pinion Bearing
  4. WJB WBMA1206EF WBMA1206EF-Rear Wheel Cylindrical Roller Bearing-Cross Reference: National Timken MA1...
  5. uxcell AXK3047+2AS Needle Roller Thrust Bearings with 2 Washers, 30mm Inner Diameter, 47mm OD, 2mm o...
  6. FAG NU306E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Ca...
  7. Sealmaster ER-26 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/8" B...
  8. Sealmaster ER-21 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/16" ...
  9. Sealmaster ER-24 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-1/2" B...
  10. NU206 Cylindrical Roller Bearing 30x62x16 mm, Steel Cage, Open

Most Wished For

  1. FAG NJ205E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Flan...
  2. URB NU205 EC3 Cylindrical Roller Bearing, Pressed Steel Cage, 25 mm ID x 52 mm OD x 15 mm Width
  3. Timken R1581TV Pinion Bearing
  4. WJB WBMA1206EF WBMA1206EF-Rear Wheel Cylindrical Roller Bearing-Cross Reference: National Timken MA1...
  5. uxcell AXK3047+2AS Needle Roller Thrust Bearings with 2 Washers, 30mm Inner Diameter, 47mm OD, 2mm o...
  6. FAG NU306E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Ca...
  7. Sealmaster ER-26 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/8" B...
  8. Sealmaster ER-21 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/16" ...
  9. Sealmaster ER-24 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-1/2" B...
  10. NU206 Cylindrical Roller Bearing 30x62x16 mm, Steel Cage, Open

Most Gifted

  1. FAG NJ205E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Flan...
  2. URB NU205 EC3 Cylindrical Roller Bearing, Pressed Steel Cage, 25 mm ID x 52 mm OD x 15 mm Width
  3. Timken R1581TV Pinion Bearing
  4. WJB WBMA1206EF WBMA1206EF-Rear Wheel Cylindrical Roller Bearing-Cross Reference: National Timken MA1...
  5. uxcell AXK3047+2AS Needle Roller Thrust Bearings with 2 Washers, 30mm Inner Diameter, 47mm OD, 2mm o...
  6. FAG NU306E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Ca...
  7. Sealmaster ER-26 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/8" B...
  8. Sealmaster ER-21 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/16" ...
  9. Sealmaster ER-24 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-1/2" B...
  10. NU206 Cylindrical Roller Bearing 30x62x16 mm, Steel Cage, Open

Top Selling

  1. FAG NJ205E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Flan...
  2. URB NU205 EC3 Cylindrical Roller Bearing, Pressed Steel Cage, 25 mm ID x 52 mm OD x 15 mm Width
  3. Timken R1581TV Pinion Bearing
  4. WJB WBMA1206EF WBMA1206EF-Rear Wheel Cylindrical Roller Bearing-Cross Reference: National Timken MA1...
  5. uxcell AXK3047+2AS Needle Roller Thrust Bearings with 2 Washers, 30mm Inner Diameter, 47mm OD, 2mm o...
  6. FAG NU306E-TVP2 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, High Ca...
  7. Sealmaster ER-26 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/8" B...
  8. Sealmaster ER-21 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-5/16" ...
  9. Sealmaster ER-24 Cylindrical OD Bearing, Setscrew Locking Collar, Light Contact Felt Seals, 1-1/2" B...
  10. NU206 Cylindrical Roller Bearing 30x62x16 mm, Steel Cage, Open



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.