Frontpage > Industrial > Power Transmission > Flange Block Bearings

Best Flange Block Bearings - Buying Guide

Last Updated: 01/15/2019

Share on


  #1

Residential End Bearing Plates Flange Includes Bearing

Model: End Bearing Plate   |    Mpn: End Bearing Plate   |    Ean: 0753182401638   |    PartNumber: End Bearing Plate   |   Asin: B00283TZZ8

For residential garage doors- normal 7' and 8' tall doors with torsion assembly. Sold in pairs: 1 right, 1 left.

Features

  • For residential garage doors- normal 7' and 8' tall doors with torsion assembly
  • Good replacement for worn out bearings- full plate and bearing included
  • 12 gauge- heavy duty - professional grade product
  • See more on Amazon...

Brand: Residential End Bearing Plates   |   Manufacturer: Service Spring/ Nap.Lynk

Item Dimensions: 5.6 x 1.2 x 11.7 inches (14.2 x 3.0 x 29.7 cm)   |   

Amazon Price: $10.13 | as of 01/15/2019(6:22pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Peer Bearing PER UCF205-16 4 Bolt Standard Flange Bearing Unit, Cast Iron, Wide Inner Ring, Relubricable, Set Screw Locking Collar, Single Lip Seal, 1" Bore, 2-3/4" Bolt Center

Model: UCF205-16   |    Mpn: PER UCF205-16   |    PartNumber: PER UCF205-16   |   Asin: B00SH2IFQO

High grade cast iron standard duty flange unit with a wide inner ring bearing. Unit is relubricable with an anti-rotation pin. Single Lip R-Seal standard.

Features

Brand: Peer Bearing   |   Manufacturer: Peer Bearing

Package Dimensions: 2.3 x 4.2 x 4.6 inches (5.8 x 10.7 x 11.7 cm)

Amazon Price: $28.12 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $28.12

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Sealmaster SRF-12 Standard-Duty Flange Unit, 2 Bolt, Rubber Mounted, Felt Seals, Setscrew Locking Collar, Pressed Steel Housing, 3/4" Bore, 4-1/2" Overall Length, 3-5/8" Bolt Hole Spacing Width, 2 Degrees Misalignment Angle

 Ean: 0662461005477   |    PartNumber: SRF-12   |   Asin: B008G0BX3Y

This Sealmaster SRF standard-duty flange unit has a pressed steel housing with two bolt holes, felt seals, and setscrew locking collar. It is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The housing is made of pressed steel and rubber for light-duty applications that do not require rigid mounting. The rubber mounting reduces vibration, shock, and noise. The double-sealed, deep-groove ball bearing cartridge insert in the housing is rated "standard duty" for applications with moderate radial loads and light to moderate thrust or combination loads. The bearing is made of vacuum degassed 52100 chrome steel, and the inner and outer races are coated with black oxide for corrosion resistance. The inner ring is extended to provide extra shaft support. A pin and dimple anti-rotation rivet on the outer ring prevents rotation of the ring in the housing, reducing heat buildup and prolonging the bearing life. This self-aligning bearing has a convex sphered outer surface that compensates for misalignments. Low-friction felt labyrinth seals on both sides of the bearing retain lubricant applied at manufacture and help keep contaminants out. For added protection, flingers on the inner ring deflect contaminants away from the seals. The bearing locks onto the shaft with two setscrews spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment, among many others.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Pressed steel, rubber-mounted flanged housing for vibration, shock, and noise control
  • Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection
  • Setscrew lock for a three-point contact hold on the shaft
  • Extended inner ring for increased shaft support
  • See more on Amazon...

Brand: Sealmaster   |   Manufacturer: Regal

Item Dimensions: 4 x 1.5 x 4 inches (10.2 x 3.8 x 10.2 cm)   |   Package Dimensions: 1.4 x 4.1 x 4.1 inches (3.6 x 10.4 x 10.4 cm)

Amazon Price: $78.63 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $78.63

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

The Hillman Group 58102 Flange Bearing, Bronze 1/2 X 3/4 X 1 X 1/2-Inch, 4-Pack

Model: 58102   |    Mpn: MRY-PN-565835   |    Ean: 7147905909137   |    PartNumber: MRY-PN-565835   |   Asin: B00MND9FJO

A plain bearing design utilizes a hardened and polished steel shaft and a softer Bronze bushing. The bushing is replaced whenever it has worn too much. These bearings are self-lubricating as they are impregnated with oil.

Features

  • Bearings provide a housing for a shaft or fastener to pass through and give the joint greater strength
  • Sintered Bronze
  • Oil-Impregnated provides a low friction surface
  • See more on Amazon...

Brand: Hillman   |   Manufacturer: The Hillman Group

Item Dimensions: 1.6 x 1.7 x 2.5 inches (4.1 x 4.3 x 6.4 cm)   |   Package Dimensions: 1.2 x 1.5 x 2.5 inches (3.0 x 3.8 x 6.4 cm)

Amazon Price: $12.00 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

UCFT206-20 1-1/4" Bore 2 Bolt Flange Bearing Unit

 PartNumber: UCFT206-20   |   Asin: B07HCTG8FB

1 pc of UCFT206-20 1-1/4" ID 2 Bolt Flange Block Bearing with Cast Iron Housing. Total Length: 5-35/64" Bolt Center Distance: 4-37/64" Bolt Size: 3/8"

Features

  • 1-1/4" Bore
  • Wide Inner Ring Self-Aligning Bearing
  • 2 Bolt Flange Housing
  • Regreaseable
  • Set Screw Locking
  • See more on Amazon...

Brand: QBBC   |   Manufacturer: QBBC

Package Dimensions: 1.85 x 3.54 x 5.63 inches (4.7 x 9.0 x 14.3 cm)

Amazon Price: $17.99 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

(Qty 10) 6204-2RS rubber seal bearing 6204 rs ball bearings 6204rs ABEC1/C3

Model: 6204-2RS   |    Mpn: 6204-2RS   |    PartNumber: 6204-2RS   |   Asin: B00B7AXQEE

***RPM Limit Grease 16000 rpm Oil 18000 rpm ***Dimension D (Outside) 47 mm d (Inside) Bore 20 mm B (Width) 14 mm ***Deep Groove Ball Bearing ISO 9001:2000 ***ABEC Tolerance Codes ABEC1/C3 ***Vibration Level V1 ***Shield/Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C ) ****Flat Rate Shipping cost (USA Only) **** 1pc or 1000pcs the shipping price will always same.

Features

  • 6204-2rs rubber seal quality ball bearing ABEC1/C3 20 X 47 X 14 mm
  • Radial (Deep Groove) bearing
  • ISO 9001:2000
  • Material: Chrome Steel (Gcr15)
  • Flat Rate Shipping cost (USA Only) ** 1pc or 1000pcs the shipping price will always same.
  • See more on Amazon...

Brand: JSB   |   Manufacturer: JSB Great Bearings

Amazon Price: $18.90 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

SUCSF208-24 WJB 4-Bolt Stainless Flange Bearing-Set Screw Locking

 PartNumber: SUCSF208-24   |   Asin: B00FAYBPCI

New in Factory box - SUCSF208-24 WJB 4-Bolt Stainless Flange Bearing-Set Screw Locking

Features

Brand: WJB   |   Manufacturer: WJB

Amazon Price: $109.89 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $109.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Browning VF4E123 Ball Bearing Flange Unit

 PartNumber: VF4E123   |   Asin: B00DBOM942

New in Factory box - VF4E123 Browning New Ball Bearing Flange Unit

Features

Brand: Browning   |   Manufacturer: Browning

Amazon Price: $32.05 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $32.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

6204-2rs Premium Seal 6204 2rs Bearing 6204 Ball Bearings 6204 rs ABEC3

Model: 6204-2RS   |    Mpn: 6204-2RS   |    Ean: 0705332869126   |    PartNumber: 6204-2RS   |   Asin: B00ANXV5HG

***RPM Limit Grease 15000 rpm Oil 18000 rpm ***Dimension D (Outside) 47 mm d (Inside) Bore 20 mm B (Width) 14 mm ***Deep Groove Ball Bearing ISO 9001:2002 ***ABEC Tolerance Codes ABEC3/C3 ***Vibration Level V2+ ***Shield/Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C ) JSB Great Bearings

Features

  • 6204-2rs Premium quality ball bearing ABEC3/C3 20 X 47 X 14 mm
  • Radial (Deep Groove) bearing
  • EMQ ( Motor quality ) bearing
  • Material: Chrome Steel (Gcr15)
  • See more on Amazon...

Brand: JSB   |   Manufacturer: JSB Great Bearings

Package Dimensions: 1 x 2.8 x 4.1 inches (2.5 x 7.1 x 10.4 cm)

Amazon Price: $6.24 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $6.24

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Hub City FB260URX3/4 Flange Block Mounted Bearing, 2 Bolt, Normal Duty, Relube, Setscrew Locking Collar, Narrow Inner Race, Cast Iron Housing, 3/4" Bore, 1.283" Length Through Bore, 3.531" Mounting Hole Spacing

 Ean: 0662798256894   |    PartNumber: 1002-07308   |   Asin: B00ECZTDK2

This Hub City FB260UR series flange block has a cast iron housing with two bolt holes and a set screw locking collar. This bearing unit is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The cast iron housing is rigid and dampens vibration and its two bolt holes provide mounting stability. A collar extends from the bearing inside ring to lock the collar and bearing onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. The steel single-row, deep groove ball bearing insert is self-aligning and accommodates misalignments between the shaft and the housing. A pressed steel cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Nitrile rubber seals with steel guards on both sides of the bearing protect against contaminants and retain lubricant applied at manufacture and the bearing housing has a grease fitting for reapplying lubricant. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Hub City manufactures power transmission products for use in transportation, packaging, construction, material handling, and medical and food processing equipment. The company, founded in 1892, is a subdivision of Regal-Beloit and headquartered in Beloit, WI.

Features

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads
  • Set screw locking collar for secure attachment to shaft
  • Nitrile rubber seals on both sides of the bearing keep lubricant in and contaminants out
  • See more on Amazon...

Brand: Hub City   |   Manufacturer: Hub City

Package Dimensions: 1.6 x 2.9 x 4.5 inches (4.1 x 7.4 x 11.4 cm)

Amazon Price: $7.08 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.12

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Hub City FB260URX5/8 Flange Block Mounted Bearing, 2 Bolt, Normal Duty, Relube, Setscrew Locking Collar, Narrow Inner Race, Cast Iron Housing, 5/8" Bore, 1.303" Length Through Bore, 3" Mounting Hole Spacing

 Ean: 0662798256887   |    PartNumber: 1002-07307   |   Asin: B00ECZTC7Q

This Hub City FB260UR series flange block has a cast iron housing with two bolt holes and a set screw locking collar. This bearing unit is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The cast iron housing is rigid and dampens vibration and its two bolt holes provide mounting stability. A collar extends from the bearing inside ring to lock the collar and bearing onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. The steel single-row, deep groove ball bearing insert is self-aligning and accommodates misalignments between the shaft and the housing. A pressed steel cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Nitrile rubber seals with steel guards on both sides of the bearing protect against contaminants and retain lubricant applied at manufacture and the bearing housing has a grease fitting for reapplying lubricant. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Hub City manufactures power transmission products for use in transportation, packaging, construction, material handling, and medical and food processing equipment. The company, founded in 1892, is a subdivision of Regal-Beloit and headquartered in Beloit, WI.

Features

  • Two-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads
  • Set screw locking collar for secure attachment to shaft
  • Nitrile rubber seals on both sides of the bearing keep lubricant in and contaminants out
  • See more on Amazon...

Brand: Hub City   |   Manufacturer: Hub City

Package Dimensions: 1.7 x 2.8 x 4.5 inches (4.3 x 7.1 x 11.4 cm)

Amazon Price: $22.48 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $22.48

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

6203-2rs Premium Seal 6203 2rs Bearing 6203 Ball Bearings 6203 rs ABEC3

Model: 6203-2RS   |    Mpn: 6203-2RS   |    PartNumber: 6203-2RS   |   Asin: B00ALF1XMI

***RPM Limit Grease 18000 rpm ***Dimension D (Outside) 40 mm d (Inside) Bore 17 mm B (Width) 12 mm ***Deep Groove Ball Bearing ISO 9001:2002 ***ABEC Tolerance Codes ABEC3/C3 ***Vibration Level V2+ ***Shield/Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C ) JSB Great Bearings

Features

  • 6203-2rs Premium quality ball bearing ABEC3/C3 17 X 40 X 12 mm
  • Radial (Deep Groove) bearing
  • EMQ ( Motor quality ) bearing
  • Material: Chrome Steel (Gcr15)
  • JSB Great Bearings
  • See more on Amazon...

Brand: JSB   |   Manufacturer: JSB Great Bearings

Amazon Price: $5.20 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $5.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

6309-2RS SKF Brand rubber seals bearing 6309-rs ball bearings 6309 rs

Model: SKF 6309-2RS   |    Mpn: SKF 6309-2RS   |    PartNumber: SKF 6309-2RS   |   Asin: B00PCOJFNM

***Dimension D (Outside) 100 mm d (Inside) Bore 45 mm B (Width) 25 mm ***Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C ) JSB Great Bearings SKF Brand bearings

Features

  • 6309-2RS SKF Brand rubber seals bearing 6309-rs ball bearings 6309 rs
  • Radial (Deep Groove) bearing
  • SKF bearing
  • Material: Chrome Steel (Gcr15)
  • JSB Great Bearings
  • See more on Amazon...

Brand: JSB   |   Manufacturer: SKF

Amazon Price: $37.98 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $37.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Sealmaster SF-24 Standard Duty Flange Unit, 4 Bolt, Regreasable, Felt Seals, Setscrew Locking Collar, Cast Iron Housing, 1-1/2" Bore, 5-1/8" Overall Length, 4" Bolt Hole Spacing Width, 9/16" Flange Height, 2 Degrees Misalignment Angle

 Ean: 0662461003510   |    PartNumber: SF-24   |   Asin: B006MIE4EW

This Sealmaster SF standard-duty flange unit has a cast iron housing with four bolt holes, felt seals, and setscrew locking collar. It is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The one-piece housing has machined foot pads and is made of solid cast iron for rigidity and vibration damping. It is equipped with a grease fitting on the outer surface for reapplying lubricant. A locking pin-and-dimple system feeds oil through the bearing and prevents outer-ring rotation within the housing. The double-sealed, deep-groove ball bearing cartridge insert in the housing is rated "standard duty" for applications with moderate radial loads and light to moderate thrust or combination loads. The bearing is made of vacuum degassed 52100 chrome steel, and the inner and outer races are coated with black oxide for corrosion resistance. The inner ring is extended to provide extra shaft support. A pin and dimple anti-rotation rivet on the outer ring prevents rotation of the ring in the housing, reducing heat buildup and prolonging the bearing life. This self-aligning bearing has a convex sphered outer surface that compensates for misalignments. Low-friction felt labyrinth seals on both sides of the bearing retain lubricant applied at manufacture and help keep contaminants out. For added protection, flingers on the inner ring deflect contaminants away from the seals. The bearing locks onto the shaft with two setscrews spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment, among many others.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Cast iron flanged housing with a solid base for vibration damping and structural rigidity
  • Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection
  • Setscrew lock for a three-point contact hold on the shaft
  • Grease fitting on the housing for reapplying lubricant
  • See more on Amazon...

Brand: Sealmaster   |   Manufacturer: Regal

Item Dimensions: 5.7 x 2.4 x 5.7 inches (14.5 x 6.1 x 14.5 cm)   |   Package Dimensions: 2.2 x 5.7 x 5.9 inches (5.6 x 14.5 x 15.0 cm)

Amazon Price: $109.02 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $133.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

6306-2RS C3 SKF Brand rubber seals bearing 6306-rs ball bearings 6306 rs

Model: 6306-2RS1 SKF   |    Mpn: 6306-2RS1 SKF   |    PartNumber: 6306-2RS1 SKF   |   Asin: B00HMRGNLY

***Dimension D (Outside) 72 mm d (Inside) Bore 30 mm B (Width) 19 mm ***Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C ) JSB Great Bearings SKF Brand bearings

Features

  • 6306-2RS SKF Brand rubber seals bearing 6306-rs ball bearings 6306 rs
  • Radial (Deep Groove) bearing
  • SKF bearing
  • Material: Chrome Steel (Gcr15)
  • JSB Great Bearings
  • See more on Amazon...

Brand: JSB Great Bearings   |   Manufacturer: SKF

Amazon Price: $10.85 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 4-5 business days
List Price: $10.85

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Sealmaster SRF-20R Standard-Duty Flange Unit, 2 Bolt, Rubber Mounted, Felt Seals, Setscrew Locking Collar, Pressed Steel Housing, 1-1/4" Bore, 5-3/8" Overall Length, 4-3/8" Bolt Hole Spacing Width, 2 Degrees Misalignment Angle

 Ean: 0662461005545   |    PartNumber: SRF-20R   |   Asin: B008G0BQJU

This Sealmaster SRF standard-duty flange unit has a pressed steel housing with two bolt holes, felt seals, and setscrew locking collar. It is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The housing is made of pressed steel and rubber for light-duty applications that do not require rigid mounting. The rubber mounting reduces vibration, shock, and noise. The double-sealed, deep-groove ball bearing cartridge insert in the housing is rated "standard duty" for applications with moderate radial loads and light to moderate thrust or combination loads. The bearing is made of vacuum degassed 52100 chrome steel, and the inner and outer races are coated with black oxide for corrosion resistance. The inner ring is extended to provide extra shaft support. A pin and dimple anti-rotation rivet on the outer ring prevents rotation of the ring in the housing, reducing heat buildup and prolonging the bearing life. This self-aligning bearing has a convex sphered outer surface that compensates for misalignments. Low-friction felt labyrinth seals on both sides of the bearing retain lubricant applied at manufacture and help keep contaminants out. For added protection, flingers on the inner ring deflect contaminants away from the seals. The bearing locks onto the shaft with two setscrews spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment, among many others.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Pressed steel, rubber-mounted flanged housing for vibration, shock, and noise control
  • Standard-duty, deep-groove ball bearing insert for applications with moderate radial loads and light to moderate thrust or combination loads
  • Felt labyrinth seals on both sides of the bearing keep lubricant in and contaminants out and flingers provide extra sealing protection
  • Setscrew lock for a three-point contact hold on the shaft
  • Extended inner ring for increased shaft support
  • See more on Amazon...

Brand: Sealmaster   |   Manufacturer: Regal

Item Dimensions: 6.1 x 1.9 x 3.7 inches (15.5 x 4.8 x 9.4 cm)   |   Package Dimensions: 1.7 x 3.6 x 6 inches (4.3 x 9.1 x 15.2 cm)

Amazon Price: $129.83 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $129.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Hub City FB250URX1-1/2 Flange Block Mounted Bearing, 4 Bolt, Normal Duty, Relube, Setscrew Locking Collar, Narrow Inner Race, Cast Iron Housing, 1-1/2" Bore, 1.811" Length Through Bore, 4.016" Mounting Hole Spacing

 Ean: 0662798256856   |    PartNumber: 1002-07292   |   Asin: B00ECZSTZ2

This Hub City FB250UR series flange block has a cast iron housing with four bolt holes and a set screw locking collar. This bearing unit is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The cast iron housing is rigid and dampens vibration and its four bolt holes provide mounting stability. A collar extends from the bearing inside ring to lock the collar and bearing onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. The steel single-row, deep groove ball bearing insert is self-aligning and accommodates misalignments between the shaft and the housing. A pressed steel cage spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. Nitrile rubber seals with steel guards on both sides of the bearing protect against contaminants and retain lubricant applied at manufacture and the bearing housing has a grease fitting for reapplying lubricant. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Hub City manufactures power transmission products for use in transportation, packaging, construction, material handling, and medical and food processing equipment. The company, founded in 1892, is a subdivision of Regal-Beloit and headquartered in Beloit, WI.

Features

  • Four-bolt flange-style housing for a ready-to-mount installation where surface and guided shaft are perpendicular
  • Single-row deep groove ball bearing insert accommodates misalignments between the shaft and the housing
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads
  • Set screw locking collar for secure attachment to shaft
  • Nitrile rubber seals on both sides of the bearing keep lubricant in and contaminants out
  • See more on Amazon...

Brand: Hub City   |   Manufacturer: Hub City

Package Dimensions: 2.3 x 5.4 x 5.8 inches (5.8 x 13.7 x 14.7 cm)

Amazon Price: $40.17 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $40.17

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

12 Pcs CY-25A 1-inch Nylon Roller Ball Transfer Bearing Unit Flange Conveyor

 Ean: 0723668719434   |    PartNumber: CY-25A   |   Asin: B077TBBC3V

Package Included: 12 x Ball Transfer Unit

Features

  • Surface treatment : Zinc Plating
  • CY-25A 1 inch diameter Nylon ball bearing roller
  • 360 degree universal transfer bearing
  • With a load bearing capacity of 66 lbs. each
  • Two screw holes in each bearing
  • See more on Amazon...

Brand: findpro   |   Manufacturer: Shagna

Package Dimensions: 2.01 x 6.02 x 6.22 inches (5.1 x 15.3 x 15.8 cm)

Amazon Price: $19.99 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

(Qty. 10) 6206-2rs Premium Seal 6206 2rs Bearing 6206 Ball Bearings 6206 rs ABEC3

Model: 6206-2RS (Free shipping)   |    Mpn: 6206-2RS (Free shipping)   |    PartNumber: 6206-2RS (Free shipping)   |   Asin: B013LZ2UAS

***RPM Limit Grease 12000 rpm ***Dimension D (Outside) 62 mm d (Inside) Bore 30 mm B (Width) 16 mm ***Deep Groove Ball Bearing ISO 9001:2002 ***ABEC Tolerance Codes ABEC3/C3 ***Vibration Level V2+ ***Shield/Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C )

Features

  • 6206-2rs Premium Seal 6206 2rs Bearing 6206 Ball Bearings 6206 rs ABEC3
  • Radial (Deep Groove) bearing
  • EMQ ( Motor quality ) bearing
  • Material: Chrome Steel (Gcr15)
  • JSB Great Bearings
  • See more on Amazon...

Brand: JSB   |   Manufacturer: JSB Great Bearings

Amazon Price: $25.40 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

6204-2RS SKF Brand rubber seals bearing 6204-rs ball bearings 6204 rs

 PartNumber: SKF 6204-2RS   |   Asin: B079YZ893L

***Dimension D (Outside) 47 mm d (Inside) Bore 20 mm B (Width) 14 mm ***Internal clearance Codes C3 ***Vibration Level V2+ ***Closure codes 2RS (Two Side Rubber Seal) ***Lubrication: Grease (Wide Temperature Range: - 20 C to 120 C ) SKF Brand Bearings

Features

  • 6204-2RS SKF Brand rubber seals bearing 6204-rs ball bearings 6204 rs
  • Radial (Deep Groove) bearing
  • SKF bearing
  • Material: Chrome Steel (Gcr15)
  • JSB Great Bearings
  • See more on Amazon...

Brand: JSB   |   Manufacturer: SKF

Amazon Price: $8.99 | as of 01/15/2019(6:22pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Residential End Bearing Plates Flange Includes Bearing
  2. Peer Bearing PER UCF205-16 4 Bolt Standard Flange Bearing Unit, Cast Iron, Wide Inner Ring, Relubric...
  3. Sealmaster SRF-12 Standard-Duty Flange Unit, 2 Bolt, Rubber Mounted, Felt Seals, Setscrew Locking Co...
  4. The Hillman Group 58102 Flange Bearing, Bronze 1/2 X 3/4 X 1 X 1/2-Inch, 4-Pack
  5. UCFT206-20 1-1/4" Bore 2 Bolt Flange Bearing Unit
  6. (Qty 10) 6204-2RS rubber seal bearing 6204 rs ball bearings 6204rs ABEC1/C3
  7. SUCSF208-24 WJB 4-Bolt Stainless Flange Bearing-Set Screw Locking
  8. Browning VF4E123 Ball Bearing Flange Unit
  9. 6204-2rs Premium Seal 6204 2rs Bearing 6204 Ball Bearings 6204 rs ABEC3
  10. Hub City FB260URX3/4 Flange Block Mounted Bearing, 2 Bolt, Normal Duty, Relube, Setscrew Locking Col...

Most Wished For

  1. Residential End Bearing Plates Flange Includes Bearing
  2. Peer Bearing PER UCF205-16 4 Bolt Standard Flange Bearing Unit, Cast Iron, Wide Inner Ring, Relubric...
  3. Sealmaster SRF-12 Standard-Duty Flange Unit, 2 Bolt, Rubber Mounted, Felt Seals, Setscrew Locking Co...
  4. The Hillman Group 58102 Flange Bearing, Bronze 1/2 X 3/4 X 1 X 1/2-Inch, 4-Pack
  5. UCFT206-20 1-1/4" Bore 2 Bolt Flange Bearing Unit
  6. (Qty 10) 6204-2RS rubber seal bearing 6204 rs ball bearings 6204rs ABEC1/C3
  7. SUCSF208-24 WJB 4-Bolt Stainless Flange Bearing-Set Screw Locking
  8. Browning VF4E123 Ball Bearing Flange Unit
  9. 6204-2rs Premium Seal 6204 2rs Bearing 6204 Ball Bearings 6204 rs ABEC3
  10. Hub City FB260URX3/4 Flange Block Mounted Bearing, 2 Bolt, Normal Duty, Relube, Setscrew Locking Col...

Most Gifted

  1. Residential End Bearing Plates Flange Includes Bearing
  2. Peer Bearing PER UCF205-16 4 Bolt Standard Flange Bearing Unit, Cast Iron, Wide Inner Ring, Relubric...
  3. Sealmaster SRF-12 Standard-Duty Flange Unit, 2 Bolt, Rubber Mounted, Felt Seals, Setscrew Locking Co...
  4. The Hillman Group 58102 Flange Bearing, Bronze 1/2 X 3/4 X 1 X 1/2-Inch, 4-Pack
  5. UCFT206-20 1-1/4" Bore 2 Bolt Flange Bearing Unit
  6. (Qty 10) 6204-2RS rubber seal bearing 6204 rs ball bearings 6204rs ABEC1/C3
  7. SUCSF208-24 WJB 4-Bolt Stainless Flange Bearing-Set Screw Locking
  8. Browning VF4E123 Ball Bearing Flange Unit
  9. 6204-2rs Premium Seal 6204 2rs Bearing 6204 Ball Bearings 6204 rs ABEC3
  10. Hub City FB260URX3/4 Flange Block Mounted Bearing, 2 Bolt, Normal Duty, Relube, Setscrew Locking Col...

Top Selling

  1. Residential End Bearing Plates Flange Includes Bearing
  2. Peer Bearing PER UCF205-16 4 Bolt Standard Flange Bearing Unit, Cast Iron, Wide Inner Ring, Relubric...
  3. Sealmaster SRF-12 Standard-Duty Flange Unit, 2 Bolt, Rubber Mounted, Felt Seals, Setscrew Locking Co...
  4. The Hillman Group 58102 Flange Bearing, Bronze 1/2 X 3/4 X 1 X 1/2-Inch, 4-Pack
  5. UCFT206-20 1-1/4" Bore 2 Bolt Flange Bearing Unit
  6. (Qty 10) 6204-2RS rubber seal bearing 6204 rs ball bearings 6204rs ABEC1/C3
  7. SUCSF208-24 WJB 4-Bolt Stainless Flange Bearing-Set Screw Locking
  8. Browning VF4E123 Ball Bearing Flange Unit
  9. 6204-2rs Premium Seal 6204 2rs Bearing 6204 Ball Bearings 6204 rs ABEC3
  10. Hub City FB260URX3/4 Flange Block Mounted Bearing, 2 Bolt, Normal Duty, Relube, Setscrew Locking Col...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.