Frontpage > Industrial > Power Transmission > Grid Couplings

Best Grid Couplings - Buying Guide

Last Updated: 01/15/2019

Share on

Bestselling Grid Couplings on Amazon

  1. Lovejoy 38838 Size LF30 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  2. Lovejoy 38629 Size LF8 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A S...
  3. Lovejoy 38826 Size LF16 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  4. Lovejoy 41381 Size LF28 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  5. Lovejoy 45093 Size LF16X Torsional Coupling Base Element with Hardware, Zytel, 2120 in-lbs Nominal Torque
  6. Lovejoy 05367 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Metric Hard...
  7. Lovejoy 05350 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Inch Hardwa...
  8. Lovejoy 38814 Size LF4 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A S...
  9. Lovejoy 6500 Size 1020 Grid Spacer Coupling Shaft Hub, Inch, 0.625" Bore, 422 in-lbs Nominal Torque,...
  10. Mxfans 2X Model Boat Car Motor Connector Rotatable U Joint Coupling 4mm to 6mm

  #1

Lovejoy 38838 Size LF30 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A Shore Hardness, 4400 in-lbs Nominal Torque

Model: 68514438838   |    Mpn: 68514438838   |    Ean: 0685144388384   |    PartNumber: 68514438838   |   Asin: B004QWZGZW

This Lovejoy elastomer torsional coupling base element replaces the base element on Lovejoy LF series torsional coupling assemblies. It is made of high temperature rubber (HTR) for transferring and absorbing shock load and reducing wear on both shafts, and it can flex up to three degrees to compensate for angular misalignment. This coupling is electrically isolating to prevent electrical arcing and circuit shortages and attaches to a flanged hub, flywheel adapter plate, or flywheel on the engine side and a cylindrical hub on the driven equipment side. Lovejoy LF series torsional couplings are suitable for use in various applications such as generators, compressors, pumps, blowers, fans, and other industrial driven equipment connecting to either the engine flywheel or a power take-off (PTO), among others.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.

Features

  • For use with Lovejoy LF Series Torsional coupling assemblies (sold separately)
  • High temperature rubber (HTR) for transferring and absorbing shock load
  • Electrical isolating to prevent electrical arcing and circuit shortages
  • Attaches to flanged hub, flywheel adapter plate, or flywheel on engine side and cylindrical hub on driven equipment side
  • Flexes up to 3 degrees to compensate for angular misalignment of coupled shafts
  • See more on Amazon...

Brand: Lovejoy   |   Manufacturer: Lovejoy

Package Dimensions: 4.1 x 8.4 x 9.4 inches (10.4 x 21.3 x 23.9 cm)

Amazon Price: $254.00 | as of 01/15/2019(6:24pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $254.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Lovejoy 38629 Size LF8 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A Shore Hardness, 7960 in-lbs Nominal Torque

Model: 68514438629   |    Mpn: 68514438629   |    Ean: 0685144386298   |    PartNumber: 68514438629   |   Asin: B004QWZH10

This Lovejoy elastomer torsional coupling base element replaces the base element on Lovejoy LF series torsional coupling assemblies. It is made of high temperature rubber (HTR) for transferring and absorbing shock load and reducing wear on both shafts, and it can flex up to three degrees to compensate for angular misalignment. This coupling is electrically isolating to prevent electrical arcing and circuit shortages and attaches to a flanged hub, flywheel adapter plate, or flywheel on the engine side and a cylindrical hub on the driven equipment side. Lovejoy LF series torsional couplings are suitable for use in various applications such as generators, compressors, pumps, blowers, fans, and other industrial driven equipment connecting to either the engine flywheel or a power take-off (PTO), among others.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.

Features

  • For use with Lovejoy LF Series Torsional coupling assemblies (sold separately)
  • High temperature rubber (HTR) for transferring and absorbing shock load
  • Electrical isolating to prevent electrical arcing and circuit shortages
  • Attaches to flanged hub, flywheel adapter plate, or flywheel on engine side and cylindrical hub on driven equipment side
  • Flexes up to 3 degrees to compensate for angular misalignment of coupled shafts
  • See more on Amazon...

Brand: Lovejoy   |   Manufacturer: Lovejoy

Package Dimensions: 1.8 x 5.5 x 5.5 inches (4.6 x 14.0 x 14.0 cm)

Amazon Price: $69.90 | as of 01/15/2019(6:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $73.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Lovejoy 38826 Size LF16 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A Shore Hardness, 1770 in-lbs Nominal Torque

Model: 68514438826   |    Mpn: 68514438826   |    Ean: 0685144388261   |    PartNumber: 68514438826   |   Asin: B004QWZGYI

This Lovejoy elastomer torsional coupling base element replaces the base element on Lovejoy LF series torsional coupling assemblies. It is made of high temperature rubber (HTR) for transferring and absorbing shock load and reducing wear on both shafts, and it can flex up to three degrees to compensate for angular misalignment. This coupling is electrically isolating to prevent electrical arcing and circuit shortages and attaches to a flanged hub, flywheel adapter plate, or flywheel on the engine side and a cylindrical hub on the driven equipment side. Lovejoy LF series torsional couplings are suitable for use in various applications such as generators, compressors, pumps, blowers, fans, and other industrial driven equipment connecting to either the engine flywheel or a power take-off (PTO), among others.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.

Features

  • For use with Lovejoy LF Series Torsional coupling assemblies (sold separately)
  • High temperature rubber (HTR) for transferring and absorbing shock load
  • Electrical isolating to prevent electrical arcing and circuit shortages
  • Attaches to flanged hub, flywheel adapter plate, or flywheel on engine side and cylindrical hub on driven equipment side
  • Flexes up to 3 degrees to compensate for angular misalignment of coupled shafts
  • See more on Amazon...

Brand: Lovejoy   |   Manufacturer: Lovejoy

Package Dimensions: 2.2 x 6.2 x 6.2 inches (5.6 x 15.7 x 15.7 cm)

Amazon Price: $126.00 | as of 01/15/2019(6:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $126.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Lovejoy 41381 Size LF28 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A Shore Hardness, 3700 in-lbs Nominal Torque

 Ean: 0685144413819   |    PartNumber: 68514441381   |   Asin: B004QWZGZM

This Lovejoy elastomer torsional coupling base element replaces the base element on Lovejoy LF series torsional coupling assemblies. It is made of high temperature rubber (HTR) for transferring and absorbing shock load and reducing wear on both shafts, and it can flex up to three degrees to compensate for angular misalignment. This coupling is electrically isolating to prevent electrical arcing and circuit shortages and attaches to a flanged hub, flywheel adapter plate, or flywheel on the engine side and a cylindrical hub on the driven equipment side. Lovejoy LF series torsional couplings are suitable for use in various applications such as generators, compressors, pumps, blowers, fans, and other industrial driven equipment connecting to either the engine flywheel or a power take-off (PTO), among others.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.

Features

  • For use with Lovejoy LF Series Torsional coupling assemblies (sold separately)
  • High temperature rubber (HTR) for transferring and absorbing shock load
  • Electrical isolating to prevent electrical arcing and circuit shortages
  • Attaches to flanged hub, flywheel adapter plate, or flywheel on engine side and cylindrical hub on driven equipment side
  • Flexes up to 3 degrees to compensate for angular misalignment of coupled shafts
  • See more on Amazon...

Brand: Lovejoy   |   Manufacturer: Lovejoy

Package Dimensions: 2.3 x 7 x 7.4 inches (5.8 x 17.8 x 18.8 cm)

First Available: 2017-03-12

Amazon Price: $234.00 | as of 01/15/2019(6:24pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $234.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Lovejoy 45093 Size LF16X Torsional Coupling Base Element with Hardware, Zytel, 2120 in-lbs Nominal Torque

Model: 68514445093   |    Mpn: 68514445093   |    Ean: 0685144450937   |    PartNumber: 68514445093   |   Asin: B004QWZH1A

This Lovejoy elastomer torsional coupling base element replaces the base element on Lovejoy LF series torsional coupling assemblies. It is made of a high temperature nylon (Zytel) for transferring and absorbing shock load and reducing wear on both shafts, and it can flex up to three degrees to compensate for angular misalignment. This coupling is electrically isolating to prevent electrical arcing and circuit shortages, and attaches to a flanged hub, flywheel adapter plate, or flywheel on the engine side and a cylindrical hub on the driven equipment side. Lovejoy LF series torsional couplings are suitable for use in various applications such as generators, compressors, pumps, blowers, fans, and other industrial driven equipment connecting to either the engine flywheel or a power take-off (PTO), among others.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.

Features

  • For use with Lovejoy LF Series Torsional coupling assemblies (sold separately)
  • High temperature nylon for resistance to oil, heat, and corrosion
  • Electrical isolating to prevent electrical arcing and circuit shortages
  • Attaches to flanged hub, flywheel adapter plate, or flywheel on engine side and cylindrical hub on driven equipment side
  • Flexes up to 3 degrees to compensate for angular misalignment of coupled shafts
  • See more on Amazon...

Brand: Lovejoy   |   Manufacturer: Lovejoy

Package Dimensions: 2 x 3.2 x 5.5 inches (5.1 x 8.1 x 14.0 cm)

Amazon Price: $204.00 | as of 01/15/2019(6:24pm pst)
Availibility: Usually ships in 3 to 5 days
List Price: $204.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Lovejoy 05367 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Metric Hardware, 4.33" OD, 3.88" Length, 1,320 in-lbs Nominal Torque, 4500 rpm Max Rotational Speed

Model: 69790405367   |    Mpn: 69790405367   |    Ean: 0697904053678   |    PartNumber: 69790405367   |   Asin: B004QX04E4

This Lovejoy 1000 series grid coupling cover and grid assembly replace worn cover and grid sets on existing Lovejoy 1000 series grid couplings and are made of lightweight, die-cast aluminum to resist corrosion and tarnishing. Grid couplings, a type of flexible coupling, use a flexible grid that fits into slotted hubs to transmit torque and offset rotational misalignment. The serpentine shape of the grid absorbs impact energy, reduces vibration, and transmits torque from one hub to the other through the grid. This grid is suitable on horizontal-style coupling designs and uses imperial unit measurements for industry consistency and interchangeability. It has an operating temperature range of -40 to 250 degrees F (-40 to 121 degrees C). Together with the other component parts of the coupling assembly, the grid supports constant angular misalignments up to 0.25 degrees. It meets International Organization for Standardization (ISO) 9001 for quality assurance. Lovejoy 1000 series grid couplings are suitable for use in various industrial power transmission applications such as pumps, mixers, crushers, fans, compressors, conveyors, pulverizers, and other equipment found in the steel, pulp, paper, mining, aggregate, and construction industries.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.

Features

  • For use with Lovejoy 1000 series grid coupling assembly (sold separately)
  • Horizontally split cover for applications with limited space requirements
  • Die-cast aluminum is lightweight and resists corrosion and tarnishing
  • Supports constant angular misalignment of up to 0.25 degrees
  • Imperial unit measurements for industry consistency
  • See more on Amazon...

Brand: Lovejoy   |   Manufacturer: Lovejoy

Package Dimensions: 4 x 6 x 6.6 inches (10.2 x 15.2 x 16.8 cm)

Amazon Price: $142.44 | as of 01/15/2019(6:24pm pst)
Availibility: Usually ships in 3 to 5 days
List Price: $142.44

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Lovejoy 05350 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Inch Hardware, 4.33" OD, 3.88" Length, 1,320 in-lbs Nominal Torque, 4500 rpm Max Rotational Speed

Model: 69790405350   |    Mpn: 69790405350   |    Ean: 0697904053500   |    PartNumber: 69790405350   |   Asin: B004QX04DU

This Lovejoy 1000 series grid coupling cover and grid assembly replace worn cover and grid sets on existing Lovejoy 1000 series grid couplings and are made of lightweight, die-cast aluminum to resist corrosion and tarnishing. Grid couplings, a type of flexible coupling, use a flexible grid that fits into slotted hubs to transmit torque and offset rotational misalignment. The serpentine shape of the grid absorbs impact energy, reduces vibration, and transmits torque from one hub to the other through the grid. This grid is suitable on horizontal-style coupling designs and uses imperial unit measurements for industry consistency and interchangeability. It has an operating temperature range of -40 to 250 degrees F (-40 to 121 degrees C). Together with the other component parts of the coupling assembly, the grid supports constant angular misalignments up to 0.25 degrees. It meets International Organization for Standardization (ISO) 9001 for quality assurance. Lovejoy 1000 series grid couplings are suitable for use in various industrial power transmission applications such as pumps, mixers, crushers, fans, compressors, conveyors, pulverizers, and other equipment found in the steel, pulp, paper, mining, aggregate, and construction industries.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.

Features

  • For use with Lovejoy 1000 series grid coupling assembly (sold separately)
  • Horizontally split cover for applications with limited space requirements
  • Die-cast aluminum is lightweight and resists corrosion and tarnishing
  • Supports constant angular misalignment of up to 0.25 degrees
  • Imperial unit measurements for industry consistency
  • See more on Amazon...

Brand: Lovejoy   |   Manufacturer: Lovejoy

Package Dimensions: 3.6 x 6 x 6.5 inches (9.1 x 15.2 x 16.5 cm)

Amazon Price: $112.70 | as of 01/15/2019(6:24pm pst)
Availibility: Usually ships in 3 to 5 days
List Price: $112.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Lovejoy 38814 Size LF4 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A Shore Hardness, 440 in-lbs Nominal Torque

Model: 68514438814   |    Mpn: 68514438814   |    Ean: 0685144388148   |    PartNumber: 68514438814   |   Asin: B004QWZH06

This Lovejoy elastomer torsional coupling base element replaces the base element on Lovejoy LF series torsional coupling assemblies. It is made of high temperature rubber (HTR) for transferring and absorbing shock load and reducing wear on both shafts, and it can flex up to three degrees to compensate for angular misalignment. This coupling is electrically isolating to prevent electrical arcing and circuit shortages and attaches to a flanged hub, flywheel adapter plate, or flywheel on the engine side and a cylindrical hub on the driven equipment side. Lovejoy LF series torsional couplings are suitable for use in various applications such as generators, compressors, pumps, blowers, fans, and other industrial driven equipment connecting to either the engine flywheel or a power take-off (PTO), among others.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.

Features

  • For use with Lovejoy LF Series Torsional coupling assemblies (sold separately)
  • High temperature rubber (HTR) for transferring and absorbing shock load
  • Electrical isolating to prevent electrical arcing and circuit shortages
  • Attaches to flanged hub, flywheel adapter plate, or flywheel on engine side and cylindrical hub on driven equipment side
  • Flexes up to 3 degrees to compensate for angular misalignment of coupled shafts
  • See more on Amazon...

Brand: Lovejoy   |   Manufacturer: Lovejoy

Package Dimensions: 1.6 x 4.5 x 4.6 inches (4.1 x 11.4 x 11.7 cm)

Amazon Price: $20.66 | as of 01/15/2019(6:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.93

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Lovejoy 6500 Size 1020 Grid Spacer Coupling Shaft Hub, Inch, 0.625" Bore, 422 in-lbs Nominal Torque, 0.1875" Keyway Width

Model: 69790406500   |    Mpn: 69790406500   |    Ean: 0697904065008   |    PartNumber: 69790406500   |   Asin: B004QX0430

This Lovejoy 1000 series grid coupling assembly shaft hub replaces worn hubs on existing Lovejoy 1000 series grid couplings and is made of stamped steel for strength and durability. Grid couplings, a type of flexible coupling, use a flexible grid that fits into slotted hubs to transmit torque and offset rotational misalignment. The serpentine shape of the grid absorbs impact energy, reduces vibration, and transmits torque from one hub to the other through the grid. This grid is suitable for both horizontal and vertical-style coupling designs and uses imperial unit measurements for industry consistency and interchangeability. It has an operating temperature range of -40 to 250 degrees F (-40 to 121 degrees C). Together with the other component parts of the coupling assembly, the grid supports constant angular misalignments up to 0.25 degrees. It meets International Organization for Standardization (ISO) 9001 for quality assurance. Lovejoy 1000 series grid couplings are suitable for use in various industrial power transmission applications such as pumps, mixers, crushers, fans, compressors, conveyors, pulverizers, and other equipment found in the steel, pulp, paper, mining, aggregate, and construction industries.

Flexible couplings are used to link two rotating shafts that are not aligned in order to transmit the rotational power, known as torque, from one shaft to the other. Most flexible couplings consist of two hubs and a middle assembly; each hub attaches to a shaft while the middle assembly flexes between the hubs to accommodate the misalignment of the two shafts. Shaft misalignments are generally either parallel or angular and cause complications to transmitting rotational power from one shaft to another in the form of stresses, loads, vibrations, and other forces, which vary from one type of misalignment to another. Flexible couplings are used in a broad range of applications, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

Lovejoy manufactures flexible couplings, universal joints, variable speed drives and various other transmission and mechanical power products. Their products meet the standards of the International Organization for Standardization (ISO), the Deutsches Institut f r Normung (DIN), the American National Standards Institute (ANSI), the American Gear Manufacturers Association (AGMA), the Society of Automotive Engineers (SAE) and Japanese Industrial Standards (JIS) for quality assurance. The company, founded in 1900, is based in Downers Grove, IL.

Features

  • For use with Lovejoy 1000 series grid coupling assembly (sold separately)
  • Open-style shaft hub for horizontal- or vertical-style grid coupling assemblies
  • Stamped steel for strength and durability
  • Supports constant angular misalignment of up to 0.25 degrees
  • Imperial unit measurements for industry consistency
  • See more on Amazon...

Brand: Lovejoy   |   Manufacturer: Lovejoy

Package Dimensions: 2.4 x 3.7 x 4.2 inches (6.1 x 9.4 x 10.7 cm)

Amazon Price: $137.84 | as of 01/15/2019(6:24pm pst)
Availibility:
List Price: $58.71

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Mxfans 2X Model Boat Car Motor Connector Rotatable U Joint Coupling 4mm to 6mm

 PartNumber: M3180626026   |   Asin: B07F9R23JK

Features:
1.Each qualify checked item with a unique Manufacturing Part Number label on the inner package to confirm if it is the authentic item sold from our store.
2.When you have any problems about your item, please send us the MPN label information first.
3.Metal universal joints are suitable for the use of motor shafts.
4.Suitable for all kinds of metal transfer models such as model cars, model ships, and robots
5.Made of steel,durable.Easy to install.

Specifications:
Color: Silver
Material: Steel
Brand: Mxfans
size:
Length: 24mm
Outside diameter: 11mm
Large hole diameter: 6mm
Small hole diameter: 4mm
(The side hole applies M4 machine screws)
Weight:21 g

Package include:
2 x Rotatable Joint Coupling
1 x Wrench
4 x screw

Features

  • Made of steel,durable.Easy to install.
  • Suitable for all kinds of metal transfer models such as model cars, model ships, and robots
  • Metal universal joints are suitable for the use of motor shafts.
  • See more on Amazon...

Brand: Mxfans   |   Manufacturer: blhlltd

Amazon Price: $3.84 | as of 01/15/2019(6:24pm pst)
Availibility: Usually ships in 24 hours
List Price: $3.84

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

FALK 0706394 11F Coupling Grid D661415

 PartNumber: D661415-0706394   |   Asin: B07MTN95QP

FALK 0706394 11F COUPLING GRID D661415

Features

Brand: Falk   |   Manufacturer: FALK

Item Dimensions: 4.25 x 5 x 8.75 inches (10.8 x 12.7 x 22.2 cm)   |   Package Dimensions: 4.25 x 5 x 8.75 inches (10.8 x 12.7 x 22.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

FALK 706390 STEELFLEX Grid Size 7 D658099

 PartNumber: D658099-706390   |   Asin: B07MPCJ7FW

FALK 706390 STEELFLEX GRID SIZE 7 D658099

Features

Brand: Falk   |   Manufacturer: FALK

Item Dimensions: 2.5 x 3 x 5.25 inches (6.4 x 7.6 x 13.3 cm)   |   Package Dimensions: 2.5 x 3 x 5.25 inches (6.4 x 7.6 x 13.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

FALK 7F Grid Coupling D658160

 PartNumber: D658160-7F   |   Asin: B07ML4DYN7

FALK 7F GRID COUPLING D658160

Features

Brand: Falk   |   Manufacturer: FALK

Item Dimensions: 2 x 3 x 4.25 inches (5.1 x 7.6 x 10.8 cm)   |   Package Dimensions: 2 x 3 x 4.25 inches (5.1 x 7.6 x 10.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

FALK 1193354 STEELFLEX 1040T Grid D660201

 PartNumber: D660201-1193354   |   Asin: B07MG7534P

FALK 1193354 STEELFLEX 1040T GRID D660201

Features

Brand: Falk   |   Manufacturer: FALK

Item Dimensions: 2.25 x 3.25 x 3.25 inches (5.7 x 8.3 x 8.3 cm)   |   Package Dimensions: 2.25 x 3.25 x 3.25 inches (5.7 x 8.3 x 8.3 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

FALK 1060T10B STEELFLEX Coupling Cover D660202

 PartNumber: D660202-1060T10B   |   Asin: B07MG726DX

FALK 1060T10B STEELFLEX COUPLING COVER D660202

Features

Brand: Falk   |   Manufacturer: FALK

Item Dimensions: 3.75 x 5.75 x 5.75 inches (9.5 x 14.6 x 14.6 cm)   |   Package Dimensions: 3.75 x 5.75 x 5.75 inches (9.5 x 14.6 x 14.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

FALK 11F Coupling Grid D658205

 PartNumber: D658205-11F   |   Asin: B07MF8Z1BT

FALK 11F COUPLING GRID D658205

Features

Brand: Falk   |   Manufacturer: FALK

Item Dimensions: 3.5 x 4.25 x 7.25 inches (8.9 x 10.8 x 18.4 cm)   |   Package Dimensions: 3.5 x 4.25 x 7.25 inches (8.9 x 10.8 x 18.4 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

FALK 0775808 1060T10 STEELFLEX Cover and Grid Assembly D657347

 PartNumber: D657347-0775808 1060T10   |   Asin: B07MDDQDNC

FALK 0775808 1060T10 STEELFLEX COVER AND GRID ASSEMBLY D657347

Features

Brand: Falk   |   Manufacturer: FALK

Item Dimensions: 4.75 x 7 x 7 inches (12.1 x 17.8 x 17.8 cm)   |   Package Dimensions: 4.75 x 7 x 7 inches (12.1 x 17.8 x 17.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

FALK 0763021 5F Coupling Grid D656980

 PartNumber: D656980-0763021   |   Asin: B07M93GKFV

FALK 0763021 5F COUPLING GRID D656980

Features

Brand: Falk   |   Manufacturer: FALK

Item Dimensions: 2.75 x 3.75 x 3.75 inches (7.0 x 9.5 x 9.5 cm)   |   Package Dimensions: 2.75 x 3.75 x 3.75 inches (7.0 x 9.5 x 9.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

FALK 0763019 3F STEELFLEX Grid D656941

 PartNumber: D656941-0763019 3F   |   Asin: B07M65HP3W

FALK 0763019 3F STEELFLEX GRID D656941

Features

Brand: Falk   |   Manufacturer: FALK

Item Dimensions: 2.75 x 3.5 x 3.75 inches (7.0 x 8.9 x 9.5 cm)   |   Package Dimensions: 2.75 x 3.5 x 3.75 inches (7.0 x 8.9 x 9.5 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

FALK 0758298 1050T20 STEELFLEX Cover Grid Assembly D656477

 PartNumber: D656477-0758298 1050T20   |   Asin: B07LHG21MB

FALK 0758298 1050T20 STEELFLEX COVER GRID ASSEMBLY D656477 GRID NOT INCLUDED

Features

Brand: Falk   |   Manufacturer: FALK

Item Dimensions: 4.5 x 6.75 x 7 inches (11.4 x 17.1 x 17.8 cm)   |   Package Dimensions: 4.5 x 6.75 x 7 inches (11.4 x 17.1 x 17.8 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Lovejoy 38838 Size LF30 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  2. Lovejoy 38629 Size LF8 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A S...
  3. Lovejoy 38826 Size LF16 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  4. Lovejoy 41381 Size LF28 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  5. Lovejoy 45093 Size LF16X Torsional Coupling Base Element with Hardware, Zytel, 2120 in-lbs Nominal T...
  6. Lovejoy 05367 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Metric Hard...
  7. Lovejoy 05350 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Inch Hardwa...
  8. Lovejoy 38814 Size LF4 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A S...
  9. Lovejoy 6500 Size 1020 Grid Spacer Coupling Shaft Hub, Inch, 0.625" Bore, 422 in-lbs Nominal Torque,...
  10. Mxfans 2X Model Boat Car Motor Connector Rotatable U Joint Coupling 4mm to 6mm

Most Wished For

  1. Lovejoy 38838 Size LF30 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  2. Lovejoy 38629 Size LF8 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A S...
  3. Lovejoy 38826 Size LF16 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  4. Lovejoy 41381 Size LF28 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  5. Lovejoy 45093 Size LF16X Torsional Coupling Base Element with Hardware, Zytel, 2120 in-lbs Nominal T...
  6. Lovejoy 05367 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Metric Hard...
  7. Lovejoy 05350 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Inch Hardwa...
  8. Lovejoy 38814 Size LF4 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A S...
  9. Lovejoy 6500 Size 1020 Grid Spacer Coupling Shaft Hub, Inch, 0.625" Bore, 422 in-lbs Nominal Torque,...
  10. Mxfans 2X Model Boat Car Motor Connector Rotatable U Joint Coupling 4mm to 6mm

Most Gifted

  1. Lovejoy 38838 Size LF30 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  2. Lovejoy 38629 Size LF8 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A S...
  3. Lovejoy 38826 Size LF16 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  4. Lovejoy 41381 Size LF28 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  5. Lovejoy 45093 Size LF16X Torsional Coupling Base Element with Hardware, Zytel, 2120 in-lbs Nominal T...
  6. Lovejoy 05367 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Metric Hard...
  7. Lovejoy 05350 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Inch Hardwa...
  8. Lovejoy 38814 Size LF4 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A S...
  9. Lovejoy 6500 Size 1020 Grid Spacer Coupling Shaft Hub, Inch, 0.625" Bore, 422 in-lbs Nominal Torque,...
  10. Mxfans 2X Model Boat Car Motor Connector Rotatable U Joint Coupling 4mm to 6mm

Top Selling

  1. Lovejoy 38838 Size LF30 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  2. Lovejoy 38629 Size LF8 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A S...
  3. Lovejoy 38826 Size LF16 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  4. Lovejoy 41381 Size LF28 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A ...
  5. Lovejoy 45093 Size LF16X Torsional Coupling Base Element with Hardware, Zytel, 2120 in-lbs Nominal T...
  6. Lovejoy 05367 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Metric Hard...
  7. Lovejoy 05350 Size 1030 Grid Coupling Cover Set and Grid Assembly, Horizontal, Aluminum, Inch Hardwa...
  8. Lovejoy 38814 Size LF4 Torsional Coupling Base Element with Hardware, High Temperature Rubber, 60A S...
  9. Lovejoy 6500 Size 1020 Grid Spacer Coupling Shaft Hub, Inch, 0.625" Bore, 422 in-lbs Nominal Torque,...
  10. Mxfans 2X Model Boat Car Motor Connector Rotatable U Joint Coupling 4mm to 6mm



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.