Frontpage > Industrial > Power Transmission > Jewel Bearings

Best Jewel Bearings - Buying Guide

Last Updated: 07/18/2019

Share on

Bestselling Jewel Bearings on Amazon

  1. Sapphire Vee Jewel Bearing .1244" / .1256" OD , Angle 90 / 95 Degrees , Thickness .0880" / .0930" , ...
  2. Sapphire Vee Jewel Bearing .0800" / .0803" OD , Angle 85 / 95 Degrees , Thickness .0450" / .0500" , ...
  3. Cobalt Vee Jewel Pivots Angle 50 Degrees , .0156" - .016" OD , .485" - .495" Length (Pack of 5)
  4. Brass Vee Jewel Assembly Rigid .250" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020" , #5-4...
  5. Brass Vee Jewel Assembly Spring Loaded .750" Length , Angle 85 / 95 Degrees , Vee Depth .025" / .030...
  6. Sapphire Vee Jewel Bearing .0469" / .0472" OD , Angle 75 / 85 Degrees , Thickness .0374" / .0374" , ...
  7. Stainless Steel Vee Jewel Pivots Angle 70 Degrees , .0397" - .0403" OD , .365" - .375" Length (Pack of 5)
  8. Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , ...
  9. Brass Vee Jewel Assembly Spring Loaded .175" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020...
  10. Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , ...

  #1

Sapphire Vee Jewel Bearing .1244" / .1256" OD , Angle 90 / 95 Degrees , Thickness .0880" / .0930" , Vee Depth .0450" / .0550"

 PartNumber: VJ-1244-01   |   Asin: B0016JBB8E

Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended. Small Parts also offers Brass Vee Jewel Assemblies in 80/85 Degrees (VJA-1, VJA-3, and VJA-5) and 85/95 Degrees (VJA-7)and Stainless Steel Vee Jewel Pivots in 50 Degrees (p/n VJPX-1D), 70 Degrees (p/n VJPX-2D) and 53 Degrees (p/n VJPX-7D)

Features

  • Radius .0059 / .0099
  • Melting Point 3722 Degrees Fahrenheit
  • Specific Gravity 3.98
  • Scratch Hardness 9 Mohs
  • Compressive Strength 300000 psi at 25 deg Celcius
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.1 x 3 x 4 inches (0.3 x 7.6 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Sapphire Vee Jewel Bearing .0800" / .0803" OD , Angle 85 / 95 Degrees , Thickness .0450" / .0500" , Vee Depth .0200" / .0300"

 PartNumber: VJ-0800-01   |   Asin: B0016JFF90

Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended. Small Parts also offers Brass Vee Jewel Assemblies in 80/85 Degrees (VJA-1, VJA-3, and VJA-5) and 85/95 Degrees (VJA-7)and Stainless Steel Vee Jewel Pivots in 50 Degrees (p/n VJPX-1D), 70 Degrees (p/n VJPX-2D) and 53 Degrees (p/n VJPX-7D)

Features

  • Radius .0080 / .0120
  • Melting Point 3722 Degrees Fahrenheit
  • Specific Gravity 3.98
  • Scratch Hardness 9 Mohs
  • Compressive Strength 300000 psi at 25 deg Celcius
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.1 x 3 x 4 inches (0.3 x 7.6 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Cobalt Vee Jewel Pivots Angle 50 Degrees , .0156" - .016" OD , .485" - .495" Length (Pack of 5)

 PartNumber: VJPX-1D-05   |   Asin: B0016J9XRU

These double-pointed pivots are used in conjunction with Vee Jewels in 75/85 Degrees (VJ-0469), 85/5 Degrees (VJ-0787 and VJ-0800) and 90/95 Degrees (VJ-1244) and Brass Vee Jewel Assemblies in 80/85 Degrees (VJA-1, VJA-3, and VJA-5) and 85/95 Degrees (VJA-7). Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended.

Features

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.25 x 3 x 4 inches (0.6 x 7.6 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Brass Vee Jewel Assembly Rigid .250" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020" , #5-40 UNC-2 Thread

 PartNumber: VJA-5-01   |   Asin: B0016JFF9K

Set in Brass, Vee Jewel Assemblies are screw mounted. Spring loaded assemblies are recommend in an environment of shock and vibration. The Beryllium copper spring acts as a shock absorber and permits the jewel and pivot to move without breaking and then return to its normal position. Non-spring loaded screw mounted assemblies are typically used in a more stable environment. Pivot not included. Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended. Small Parts also offers individual Vee Jewels in 75/85 Degrees (VJ-0469), 85/5 Degrees (VJ-0787 and VJ-0800) and 90/95 Degrees (VJ-1244)and Stainless Steel Vee Jewel Pivots in 50 Degrees (p/n VJPX-1D), 70 Degrees (p/n VJPX-2D) and 53 Degrees (p/n VJPX-7D)

Features

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.1 x 3 x 4 inches (0.3 x 7.6 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Brass Vee Jewel Assembly Spring Loaded .750" Length , Angle 85 / 95 Degrees , Vee Depth .025" / .030" , #10-32 Thread

 PartNumber: VJA-7-01   |   Asin: B0016JDJ6Q

Set in Brass, Vee Jewel Assemblies are screw mounted. Spring loaded assemblies are recommend in an environment of shock and vibration. The Beryllium copper spring acts as a shock absorber and permits the jewel and pivot to move without breaking and then return to its normal position. Non-spring loaded screw mounted assemblies are typically used in a more stable environment. Pivot not included. Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended. Small Parts also offers individual Vee Jewels in 75/85 Degrees (VJ-0469), 85/5 Degrees (VJ-0787 and VJ-0800) and 90/95 Degrees (VJ-1244)and Stainless Steel Vee Jewel Pivots in 50 Degrees (p/n VJPX-1D), 70 Degrees (p/n VJPX-2D) and 53 Degrees (p/n VJPX-7D)

Features

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.4 x 0.4 x 2 inches (1.0 x 1.0 x 5.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Sapphire Vee Jewel Bearing .0469" / .0472" OD , Angle 75 / 85 Degrees , Thickness .0374" / .0374" , Vee Depth .0138" / .0177"

 PartNumber: VJ-0469-01   |   Asin: B0016J9XNY

Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended. Small Parts also offers Brass Vee Jewel Assemblies in 80/85 Degrees (VJA-1, VJA-3, and VJA-5) and 85/95 Degrees (VJA-7)and Stainless Steel Vee Jewel Pivots in 50 Degrees (p/n VJPX-1D), 70 Degrees (p/n VJPX-2D) and 53 Degrees (p/n VJPX-7D)

Features

  • Radius .0020 / .00331
  • Melting Point 3722 Degrees Fahrenheit
  • Specific Gravity 3.98
  • Scratch Hardness 9 Mohs
  • Compressive Strength 300000 psi at 25 deg Celcius
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.3 x 0.9 x 2 inches (0.8 x 2.3 x 5.1 cm)

First Available: 2017-03-12

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Stainless Steel Vee Jewel Pivots Angle 70 Degrees , .0397" - .0403" OD , .365" - .375" Length (Pack of 5)

 PartNumber: VJPX-2D-05   |   Asin: B0016JDJ7A

These double-pointed pivots are used in conjunction with Vee Jewels in 75/85 Degrees (VJ-0469), 85/5 Degrees (VJ-0787 and VJ-0800) and 90/95 Degrees (VJ-1244) and Brass Vee Jewel Assemblies in 80/85 Degrees (VJA-1, VJA-3, and VJA-5) and 85/95 Degrees (VJA-7). Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended.

Features

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.6 x 4 x 4 inches (1.5 x 10.2 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , Vee Depth .0250" / .0300"

 PartNumber: VJ-0787-01   |   Asin: B0016J9XPC

Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended. Small Parts also offers Brass Vee Jewel Assemblies in 80/85 Degrees (VJA-1, VJA-3, and VJA-5) and 85/95 Degrees (VJA-7)and Stainless Steel Vee Jewel Pivots in 50 Degrees (p/n VJPX-1D), 70 Degrees (p/n VJPX-2D) and 53 Degrees (p/n VJPX-7D)

Features

  • Radius .0080 / .0120
  • Melting Point 3722 Degrees Fahrenheit
  • Specific Gravity 3.98
  • Scratch Hardness 9 Mohs
  • Compressive Strength 300000 psi at 25 deg Celcius
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.1 x 2.5 x 3 inches (0.3 x 6.4 x 7.6 cm)

First Available: 2017-05-15

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Brass Vee Jewel Assembly Spring Loaded .175" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020" , #2-80 UNS-3A Thread

 PartNumber: VJA-3-01   |   Asin: B0016JBB9S

Set in Brass, Vee Jewel Assemblies are screw mounted. Spring loaded assemblies are recommend in an environment of shock and vibration. The Beryllium copper spring acts as a shock absorber and permits the jewel and pivot to move without breaking and then return to its normal position. Non-spring loaded screw mounted assemblies are typically used in a more stable environment. Pivot not included. Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended. Small Parts also offers individual Vee Jewels in 75/85 Degrees (VJ-0469), 85/5 Degrees (VJ-0787 and VJ-0800) and 90/95 Degrees (VJ-1244)and Stainless Steel Vee Jewel Pivots in 50 Degrees (p/n VJPX-1D), 70 Degrees (p/n VJPX-2D) and 53 Degrees (p/n VJPX-7D)

Features

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.2 x 1 x 2 inches (0.5 x 2.5 x 5.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , Vee Depth .0250" / .0300" (Pack of 5)

 PartNumber: VJ-0787-05   |   Asin: B0016JDJ5C

Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended. Small Parts also offers Brass Vee Jewel Assemblies in 80/85 Degrees (VJA-1, VJA-3, and VJA-5) and 85/95 Degrees (VJA-7)and Stainless Steel Vee Jewel Pivots in 50 Degrees (p/n VJPX-1D), 70 Degrees (p/n VJPX-2D) and 53 Degrees (p/n VJPX-7D)

Features

  • Radius .0080 / .0120
  • Melting Point 3722 Degrees Fahrenheit
  • Specific Gravity 3.98
  • Scratch Hardness 9 Mohs
  • Compressive Strength 300000 psi at 25 deg Celcius
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: SWISS JEWEL COMPANY

Package Dimensions: 0.1 x 3 x 4 inches (0.3 x 7.6 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Galaxy J6 2018 Case, The Grafu Shockproof Leather Wallet Flip Case with [Card Slots] [Wrist Strap] Stand Function Cover for Samsung Galaxy J6 2018, Blue

 Ean: 6038390239414   |    PartNumber: US2GLF13J62018M-2406   |   Asin: B07Q2BZ135

Package Included:
1 x The Grafu Phone Case for Samsung Galaxy J6 2018

Specification:
*Manufactured from the highest quality PU leather, this wallet cover is designed to be smooth and supple, making it a pleasure to hold and use
*It wil gives your phone a special and fashion look,It is durable and can well anti-dust,scratches
*There are appropriate cut outs for the lenses, sockets and buttons which all line up perfectly with the phone
*Magnetic flip closure for secure close, with built-in credit ID card slot & cash sleeve storage
*Built In Stand: Convenient for reading, watching movies, playing games and browsing the web

Features

  • Package: 1 x The Grafu Phone Case for Samsung Galaxy J6 2018
  • Crafted with premium leather, which protects your phone against scratches, damages, dust & dirt
  • Multiple cash and card slots in this case allow you to carry your ID, credit cards & cash
  • This wallet case has stand function which will bring you more convenience for movie-watching with multi-viewing angles, hanging out with friends on Face Time, and taking timed group photos
  • All buttons are fully accessible and the Phone case is easily installed and removed
  • See more on Amazon...

Brand: The Grafu   |   Manufacturer: The Grafu

Item Dimensions: 0.39 x 1.97 x 3.94 inches (1.0 x 5.0 x 10.0 cm)   |   

Amazon Price: $9.99 | as of 07/18/2019(2:47pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Acogedor Linear Sliding Table, XYZR 4 Axis Trimming Platform Linear Stage Bearing Tuning Sliding Table with High Precision, 60 60 MM/2.4 2.4 in

 Ean: 0736342083455   |    PartNumber: Acogedork1ynz9toeg   |   Asin: B07PVF71QQ

Features:
1. Made of high quality aluminum alloy material with durable construction.
2. High precision, exquisite craft, smooth surface.
3. Long life, low coefficient of friction, high versatility.
4. Linear motion, with a small frictional resistance.
5. Suitable for machine tools, automation equipment, optical equipment, etc.

Specification:
Name
XYZR horizontal lifting cross slide
Model
GXYZR-60
Table length and width
60 * 60 mm / 2.4 * 2.4in
height
118mm / 4.6in
Load
57.5N (5.5kgf)
Stroke
horizontal lifting 13mm
XY Sliding 6.5mm
Accuracy
0.01mm (the differential head rotates one turn and moves 0.5mm)
Product material
aluminum alloy (black oxide)
Parallelism
80 m
Moving parallelism
10 m
True straightness
3 m

Package list:
1 * Linear Sliding Table

Features

  • Made of high quality aluminum alloy material with durable construction.
  • High precision, exquisite craft, smooth surface.
  • Long life, low coefficient of friction, high versatility.
  • Linear motion, with a small frictional resistance.
  • Suitable for machine tools, automation equipment, optical equipment, etc.
  • See more on Amazon...

Brand: Acogedor   |   Manufacturer: Acogedor

Item Dimensions: 0.39 x 0.39 x 0.39 inches (1.0 x 1.0 x 1.0 cm)   |   

Amazon Price: $292.59 | as of 07/18/2019(2:47pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $307.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Galaxy A8 2018 Case, The Grafu Leather Case, Premium Wallet Case with [Card Slots] [Kickstand Function] Flip Notebook Cover for Samsung Galaxy A8 2018, Purple

 Ean: 6923764066980   |    PartNumber: US2GLF29A82018-0203   |   Asin: B07PLMQ2WL

Package Included:
1 x The Grafu Phone Case for Samsung Galaxy A8 2018

Specification:
*Manufactured from the highest quality PU leather, this wallet cover is designed to be smooth and supple, making it a pleasure to hold and use
*It wil gives your phone a special and fashion look,It is durable and can well anti-dust,scratches
*There are appropriate cut outs for the lenses, sockets and buttons which all line up perfectly with the phone
*Magnetic flip closure for secure close, with built-in credit ID card slot & cash sleeve storage
*Built In Stand: Convenient for reading, watching movies, playing games and browsing the web

Features

  • Package: 1 x The Grafu Phone Case for Samsung Galaxy A8 2018
  • The elegant style wallet flip case was designed with soft leather which will give you more comfortable touch feeling in your hand and high quality enjoyment
  • The stand function allows you to adjust your smartphone in the ideal position for reading or watching
  • It wil gives your phone a special and fashion look,It is durable and can well anti-dust,scratches
  • Included convenient card slots and money pocket: Carry around your ID, credit and debit cards, and cash
  • See more on Amazon...

Brand: The Grafu   |   Manufacturer: The Grafu

Item Dimensions: 0.39 x 1.97 x 3.94 inches (1.0 x 5.0 x 10.0 cm)   |   

Amazon Price: $9.99 | as of 07/18/2019(2:47pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $18.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

BR Surgical BR10-33105-45 Jeweler's Forcep, No. 5, 45 Degree Angled, Fine Tips, 4-1/8" Length

Model: BR10-33105-45   |    Mpn: BR10-33105-45   |    PartNumber: BR10-33105-45   |   Asin: B076BQRWFY

BR10-33105-45 jeweler's forceps, no. 5, 45 angled, fine tips, 4-1/8 inch Length. 4-1/8 inch Length. No. 5. 45 angled. Made in United States of America.

Features

Brand: BR Surgical   |   Manufacturer: BR Surgical

Package Dimensions: 0.5 x 1.5 x 6 inches (1.3 x 3.8 x 15.2 cm)

First Available: 2017-10-09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Graco TexSpray HTX 2030 Complete Plus Texture Sprayer w/ Freeflo Inline Gun 258741

 Ean: 0790304342714   |    PartNumber: 258741   |   Asin: B00OV1K5EA

Graco TexSpray HTX 2030 Complete Plus Texture Sprayer w/ Freeflo Inline Gun 258741

Features

Brand: Graco   |   Manufacturer: GRACO

Amazon Price: $11,599.70 | as of 07/18/2019(2:47pm pst)
Availibility: Usually ships in 3-4 business days
List Price: $11,599.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Graco Automatic Fusion AP w/ AF2020, FT0424 Flat Mixing Chamber & Tip 248380

 Ean: 0790304343636   |    PartNumber: 248380   |   Asin: B00OV1K52M

Graco Automatic Fusion AP w/ AF2020, FT0424 Flat Mixing Chamber & Tip 248380

Features

Brand: Graco   |   Manufacturer: GRACO

Amazon Price: $3,500.00 | as of 07/18/2019(2:47pm pst)
Availibility: Usually ships in 3-4 business days
List Price: $3,500.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Vee Rubber 4.50-5.10-5.50-17 Tr4 N.R.

 Ean: 0848712020585   |    PartNumber: MU0058   |   Asin: B00AFGAATK

High quality Vee Rubber motorcycle inner tube. Valve Stem Types: TR4 / TR6 Straight Metal Stem TR13 Narrow Rubber Stem TR15 Standard Rubber Stem TR87C, JS87 Bent Metal Stem 90 Degree JS2, PRV78 Bent Metal Stem 90 Degree

Features

Brand: Vee Rubber   |   Manufacturer: Vee Rubber

Item Dimensions: 4 x 6 x 8 inches (10.2 x 15.2 x 20.3 cm)   |   Package Dimensions: 3.6 x 5.8 x 7.5 inches (9.1 x 14.7 x 19.1 cm)

Amazon Price: $14.63 | as of 07/18/2019(2:47pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $14.63

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Stainless Steel Vee Jewel Pivots Angle 53 Degrees , .0496" - .0501" OD , .395" - .405" Length (Pack of 5)

 PartNumber: VJPX-7D-05   |   Asin: B0016JHHQ4

These double-pointed pivots are used in conjunction with Vee Jewels in 75/85 Degrees (VJ-0469), 85/5 Degrees (VJ-0787 and VJ-0800) and 90/95 Degrees (VJ-1244) and Brass Vee Jewel Assemblies in 80/85 Degrees (VJA-1, VJA-3, and VJA-5) and 85/95 Degrees (VJA-7). Synthetic sapphires are next to diamonds in hardness which makes these highly polished bearings scratch and shock resistant. They also have a long wear life, and are highly resistant to heat, corrosion and distortion. In addition, sapphire bearings are nonmagnetic, dielectrically strong and provide good shaft end support and freedom of motion. They are especially well suited for use in delicate instruments such as ammeters, voltmeters, compasses and precision indicator devices. The jewel radius should be 2.5 to 3 times the pivot radius. In general, the greater the ratio between jewel and pivot, the greater the sensitivity and pivot roll. The contact area of the pivot should be highly polished and a finish of 2 to 3 micro-inch on the pivot radius is recommended.

Features

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.5 x 3 x 4 inches (1.3 x 7.6 x 10.2 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Sapphire Vee Jewel Bearing .1244" / .1256" OD , Angle 90 / 95 Degrees , Thickness .0880" / .0930" , ...
  2. Sapphire Vee Jewel Bearing .0800" / .0803" OD , Angle 85 / 95 Degrees , Thickness .0450" / .0500" , ...
  3. Cobalt Vee Jewel Pivots Angle 50 Degrees , .0156" - .016" OD , .485" - .495" Length (Pack of 5)
  4. Brass Vee Jewel Assembly Rigid .250" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020" , #5-4...
  5. Brass Vee Jewel Assembly Spring Loaded .750" Length , Angle 85 / 95 Degrees , Vee Depth .025" / .030...
  6. Sapphire Vee Jewel Bearing .0469" / .0472" OD , Angle 75 / 85 Degrees , Thickness .0374" / .0374" , ...
  7. Stainless Steel Vee Jewel Pivots Angle 70 Degrees , .0397" - .0403" OD , .365" - .375" Length (Pack ...
  8. Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , ...
  9. Brass Vee Jewel Assembly Spring Loaded .175" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020...
  10. Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , ...

Most Wished For

  1. Sapphire Vee Jewel Bearing .1244" / .1256" OD , Angle 90 / 95 Degrees , Thickness .0880" / .0930" , ...
  2. Sapphire Vee Jewel Bearing .0800" / .0803" OD , Angle 85 / 95 Degrees , Thickness .0450" / .0500" , ...
  3. Cobalt Vee Jewel Pivots Angle 50 Degrees , .0156" - .016" OD , .485" - .495" Length (Pack of 5)
  4. Brass Vee Jewel Assembly Rigid .250" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020" , #5-4...
  5. Brass Vee Jewel Assembly Spring Loaded .750" Length , Angle 85 / 95 Degrees , Vee Depth .025" / .030...
  6. Sapphire Vee Jewel Bearing .0469" / .0472" OD , Angle 75 / 85 Degrees , Thickness .0374" / .0374" , ...
  7. Stainless Steel Vee Jewel Pivots Angle 70 Degrees , .0397" - .0403" OD , .365" - .375" Length (Pack ...
  8. Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , ...
  9. Brass Vee Jewel Assembly Spring Loaded .175" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020...
  10. Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , ...

Most Gifted

  1. Sapphire Vee Jewel Bearing .1244" / .1256" OD , Angle 90 / 95 Degrees , Thickness .0880" / .0930" , ...
  2. Sapphire Vee Jewel Bearing .0800" / .0803" OD , Angle 85 / 95 Degrees , Thickness .0450" / .0500" , ...
  3. Cobalt Vee Jewel Pivots Angle 50 Degrees , .0156" - .016" OD , .485" - .495" Length (Pack of 5)
  4. Brass Vee Jewel Assembly Rigid .250" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020" , #5-4...
  5. Brass Vee Jewel Assembly Spring Loaded .750" Length , Angle 85 / 95 Degrees , Vee Depth .025" / .030...
  6. Sapphire Vee Jewel Bearing .0469" / .0472" OD , Angle 75 / 85 Degrees , Thickness .0374" / .0374" , ...
  7. Stainless Steel Vee Jewel Pivots Angle 70 Degrees , .0397" - .0403" OD , .365" - .375" Length (Pack ...
  8. Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , ...
  9. Brass Vee Jewel Assembly Spring Loaded .175" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020...
  10. Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , ...

Top Selling

  1. Sapphire Vee Jewel Bearing .1244" / .1256" OD , Angle 90 / 95 Degrees , Thickness .0880" / .0930" , ...
  2. Sapphire Vee Jewel Bearing .0800" / .0803" OD , Angle 85 / 95 Degrees , Thickness .0450" / .0500" , ...
  3. Cobalt Vee Jewel Pivots Angle 50 Degrees , .0156" - .016" OD , .485" - .495" Length (Pack of 5)
  4. Brass Vee Jewel Assembly Rigid .250" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020" , #5-4...
  5. Brass Vee Jewel Assembly Spring Loaded .750" Length , Angle 85 / 95 Degrees , Vee Depth .025" / .030...
  6. Sapphire Vee Jewel Bearing .0469" / .0472" OD , Angle 75 / 85 Degrees , Thickness .0374" / .0374" , ...
  7. Stainless Steel Vee Jewel Pivots Angle 70 Degrees , .0397" - .0403" OD , .365" - .375" Length (Pack ...
  8. Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , ...
  9. Brass Vee Jewel Assembly Spring Loaded .175" Length , Angle 80 / 85 Degrees , Vee Depth .015" / .020...
  10. Sapphire Vee Jewel Bearing .0787" / .0791" OD , Angle 85 / 95 Degrees , Thickness .0433" / .0453" , ...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.