Frontpage > Industrial > Power Transmission > Linear Motion Guides

Best Linear Motion Guides - Buying Guide

Last Updated: 11/14/2018

Share on

Bestselling Linear Motion Guides on Amazon

  1. ReliaBot 2PCs 8mm x 500mm (.315" x 19.67") Case Hardened Chrome Plated Linear Motion Rod/Shaft / Gui...
  2. Two (2) 12mm x 762mm (.472" x 30") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric ...
  3. Pack of 4Pcs SK12 SH12A 12mm Linear Rail Shaft Support Block for CNC Linear Slide Bearing Guide CNC Parts
  4. OrangeA Linear Rail 15-1500mm 2xLinear Guideway Rail 4x Square Type Carriage Bearing Block Linear Ra...
  5. TEN-HIGH Linear Motion 13mm Shaft, 30" inch Length, Chrome Plated, Case Hardened, Metric
  6. 4pc 2020 CNC 3D Printer Parts European Standard Anodized Linear Rail Aluminum Profile Extrusion for ...
  7. Sydien 4pcs SK10 Aluminum Linear Motion Rail Clamping Guide Support Bracket for 10mm Diameter Shaft
  8. Two (2) 12mm x 330mm (.472" x 13") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric ...
  9. Manual Sliding Table 100mm Ballscrew 1605 Linear Rail Guide Slide Stage C7 Travel Length 4" DIY CNC ...
  10. Deltron Linear Motion Slide 3" Travel 25 lb Load Capacity 4.00" Long

  #1

ReliaBot 2PCs 8mm x 500mm (.315" x 19.67") Case Hardened Chrome Plated Linear Motion Rod/Shaft / Guide - Metric h8 Tolerance

 Ean: 0700401229474   |    PartNumber: RD048   |   Asin: B07DPFH7HL

Packing list:
2 * Diameter 8mm Linear Motion Shaft 500mm long

Features

  • The material is carbon steel, which is very suitable for linear motion rod.
  • The surface has been chrome plated to enhance the hardness.
  • Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it.
  • Diameter 8mm, tolerance -0.005mm to -0.03mm ( 7.995mm - 7.97mm)
  • Length 500mm, tolerance 0.5mm ( 499.5mm - 500.5mm )
  • See more on Amazon...

Brand: ReliaBot   |   Manufacturer: ReliaBot

Package Dimensions: 1.5 x 1.5 x 20.6 inches (3.8 x 3.8 x 52.3 cm)

Amazon Price: $20.99 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 24 hours
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Two (2) 12mm x 762mm (.472" x 30") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric G6 Tolerance

Model: FBA_BC12762-2   |    Mpn: FBA_BC12762-2   |    Ean: 0692128473394   |    PartNumber: FBA_BC12762-2   |   Asin: B01M0JN6SV

This linear motion shaft of 12 mm in diameter and 762 mm in length is chrome plated and case hardened, and is suitable for use with linear support blocks and closed type slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball bushing radial clearance. The shaft diameter and length are specified for accurate fit and this shaft is suitable for use in applications, such as measuring systems, printing equipment, and computer numerical control (CNC) tools. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Features

  • Round steel shaft for use with linear support blocks and closed type slide units in linear motion applications
  • Chrome plated for corrosion resistance
  • Case hardened for wear resistance
  • Precision ground grade 6 for consistent ball bushing radial clearance
  • Shaft diameter and length specified for accurate fit
  • See more on Amazon...

Brand: BC Precision   |   Manufacturer: BC Precision

Item Dimensions: 0.47 x 0.47 x 30 inches (1.2 x 1.2 x 76.2 cm)   |   Package Dimensions: 0.5 x 1.7 x 29.8 inches (1.3 x 4.3 x 75.7 cm)

First Available: 2018-02-05

Amazon Price: $25.50 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 1 to 2 months
List Price: $25.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Pack of 4Pcs SK12 SH12A 12mm Linear Rail Shaft Support Block for CNC Linear Slide Bearing Guide CNC Parts

 Ean: 0653334187864   |    PartNumber: SK12   |   Asin: B07HB4YJ49


Features:

Model: SK12
Shaft ID: 12mm
Size: Approx. 42x14x37.5mm

Notice:
Due to the different monitor and light effect,the actual color maybe a slight different from the picture color
Included:
4 x Linear Rail Shaft

Features

  • Model: SK12
  • Shaft ID: 12mm
  • Size: Approx. 42x14x37.5mm
  • Due to the different monitor and light effect,the actual color maybe a slight different from the picture color
  • 4 x Linear Rail Shaft
  • See more on Amazon...

Brand: HomeGoal   |   Manufacturer: HomeGoal

Package Dimensions: 1.26 x 1.85 x 3.66 inches (3.2 x 4.7 x 9.3 cm)

Amazon Price: $7.99 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

OrangeA Linear Rail 15-1500mm 2xLinear Guideway Rail 4x Square Type Carriage Bearing Block Linear Rail Support for 15mm Slotted Bearings

 Ean: 0719034813349   |    PartNumber: Slide Rails   |   Asin: B072FRPGKP

Introduction

The material is the high quality steel, extend the service life of the shaft and the machine. The shaft is case hardened, If you use normal steel shaft,The bearings will be reduce in use process.Besides, it's more durable than Plastic linear bearing. Move smoothly without deflection, minimal wear and low noise.

Feartures

Steel material and hardened Case

Pre-drilled holes on the support rail mounts

High accuracy and strong durability

Accept customized length and assembly

Parameter

Rail width: 5mm

Rail length: 1500mm

Material: Gcr15 steel

Weight: 14lbs

Package dimensions: 60"X5"X3"

Package:

2pcs 15-1500mm linear guideway length 300mm

4pcs square type carriage bearing block internal width 34mm

Features

  • Rail width 5mm; Rail length1500mm
  • Steel material support rail with pre-drilled holes for ease of mounting
  • There are 4 square carriage blocks,so that you can assembly to the flange type and rectangular
  • It can move smoothly without deflection minimal wear and low noise, because the high accuracy and strong durability
  • The Rail guide is widely used in the automation machinery such as machine tool,bending machines, laser welding machines, etc
  • See more on Amazon...

Brand: OrangeA   |   Manufacturer: OrangeA

Package Dimensions: 2.99 x 3.5 x 58.5 inches (7.6 x 8.9 x 148.6 cm)

Amazon Price: $138.89 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 1-2 business days
List Price: $138.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

4pc 2020 CNC 3D Printer Parts European Standard Anodized Linear Rail Aluminum Profile Extrusion for DIY 3D Printer (200mm)

 Ean: 5603014875586   |    PartNumber: LXC003-4   |   Asin: B07459Z2Z3

Please note : Picture just as a reference.the actual delivered goods shall prevail ! Type : European standard 2020 Aluminum Profile Material : Aluminum 6063-T5 Please check which Length and the Quantity you need . Inciuding : 4pc Aluminum Profile

Features

  • High strength aluminum extrusion
  • Standard 6mm T slot (NOT V-slot)
  • Ideal for 3D printer and CNC build
  • High-quality and service
  • See more on Amazon...

Brand: Ogry   |   Manufacturer: Ogry

Package Dimensions: 1.3 x 4.9 x 8.6 inches (3.3 x 12.4 x 21.8 cm)

Amazon Price: $15.99 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 24 hours
List Price: $15.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Sydien 4pcs SK10 Aluminum Linear Motion Rail Clamping Guide Support Bracket for 10mm Diameter Shaft

 Ean: 0704630701268   |    PartNumber: H20180601BC0485   |   Asin: B07DPM2C4H

4Pcs Linear Rail Shaft Support in a pack
Model: SK10
Fit for 10mm diameter bearing or Optical axis
Color: Silver Tone
Material: Aluminum Alloy
Shaft Diameter: 10mm/0.39inch
Mount Hole Diameter: 5.5mm/ 0.22inch
Total Size: 42x33x14mm/ 1.65x1.3x0.55inch(L W H)
Packing Weight: 93g
Packing Size: 15x10x2cm

Linear motion ball slide units SHF series are mainly used in plastic machinery industrial robot, fitness equipment, printer, woodworking machinery, firecrackers machine, Ultrasonic cleaning equipment, Solar energy auxiliary equipment, Garment auxiliary equipment and other industrial automation equipment

Features

  • 4Pcs Linear Motion Rail Clamping Guide Support in a pack, Silver Tone color
  • Shaft diameter is 10mm/0.39inch, total size is 42x33x14mm/ 1.65x1.3x0.55inch, fit for 10mm diameter bearing or Optical axis
  • Designed and manufactured from aluminum Alloy, they are an ideal solution when used with Linear Round Rails.
  • Corrosion resistance and long life, economical, easy to maintain replace
  • Widely used in multi-axis machine, installed the sliding parts such as industrial machinery.
  • See more on Amazon...

Brand: Sydien   |   Manufacturer: Shenzhenshi saidien dianzishangwuyouxiangongsi

Item Dimensions: 1.3 x 0.55 x 1.65 inches (3.3 x 1.4 x 4.2 cm)   |   

Amazon Price: $10.29 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 24 hours
List Price: $10.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Two (2) 12mm x 330mm (.472" x 13") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric G6 Tolerance

Model: BC12330-2   |    Mpn: BC12330-2   |    Ean: 0692128473387   |    PartNumber: BC12330-2   |   Asin: B01LZ95Q6O

This linear motion shaft of 8 mm in diameter and 330 mm in Length is chrome plated and case hardened, and is suitable for use with linear support blocks and closed Type slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball Bushing radial clearance. The shaft diameter and Length are specified for accurate fit and this shaft is suitable for use in applications, such as measuring systems, printing equipment, and computer numerical control (CNC) tools. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or Weldment to position the bearing securely for reliable operation, and its design determines the Type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, Barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Features

  • Round steel shaft for use with linear support blocks and closed type slide units in linear motion applications
  • Chrome plated for corrosion resistance
  • Case hardened for wear resistance
  • Precision ground grade 6 for consistent ball bushing radial clearance
  • Shaft diameter and length specified for accurate fit
  • See more on Amazon...

Brand: BC Precision   |   Manufacturer: BC Precision

Item Dimensions: 0.47 x 0.47 x 12.99 inches (1.2 x 1.2 x 33.0 cm)   |   Package Dimensions: 0.4 x 0.7 x 13.3 inches (1.0 x 1.8 x 33.8 cm)

First Available: 2018-02-05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Manual Sliding Table 100mm Ballscrew 1605 Linear Rail Guide Slide Stage C7 Travel Length 4" DIY CNC Router Controller

 Ean: 0720355103057   |    PartNumber: TH40-Manual   |   Asin: B07HH5V7WY

Package Included
1 x 100mm Handwheel Manual slider

Ballscrew Features
Stroke(mm)  Horizontal load(max)  Vertical load(max)  weight(kg)
50(mm)  30  15  1.15
100(mm)  30  10  1.3
200(mm)  30  10  1.6
300(mm)  25  10  1.9
400(mm)  25  10  2.2
500(mm)  25 5  2.5
600(mm)  25  5  2.8
700(mm)  25 5  3.1
800(mm)  25 5  3.3
900(mm)  25 5  3.6

Parameters
1. Aluminum Profile (wide* high): 40x20mm
2. Panel size ( width*long): 48x45mm
3. Front panel height 83mm, rear plate height 73mm
4. Ball screw type: 1605 (diameter 16mm, lead 5mm , 1610 screw / 1620 screw can be replaced.)
5. Ball screw accuracy: C7
6. Repeat positioning accuracy: 0.02mm
7. Material: Aviation Aluminum 6061
10. Can be equipped with electric: 57 stepper motor, servo motor (customer needs different flexible configuration)

Features

  • Stroke: 100mm / 4 inch , Ball screw accuracy: C7 ;
  • Aluminum Profile (wide* high): 40x20mm , Panel size ( width*long): 48x45mm;
  • Front panel height : 83mm, Rear plate height: 73mm
  • Rounded front and rear plate design, precision hole position processing.
  • Convenient and Easy in use, can be directly fold cross slide, gantry sliding table, 3-axis, 4-axis, multi-axis combination in use.
  • See more on Amazon...

Brand: TOAUTO   |   Manufacturer: TOAUTO

Amazon Price: $125.00 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 4-5 business days
List Price: $125.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Two (2) 8mm x 330mm (.315" x 13") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric G6 Tolerance

Model: BC8330-2   |    Mpn: BC8330-2   |    Ean: 0688938518196   |    PartNumber: BC8330-2   |   Asin: B01LXAZCE6

This linear motion shaft of 8 mm in diameter and 330 mm in Length is chrome plated and case hardened, and is suitable for use with linear support blocks and closed Type slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball Bushing radial clearance. The shaft diameter and Length are specified for accurate fit and this shaft is suitable for use in applications, such as measuring systems, printing equipment, and computer numerical control (CNC) tools. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or Weldment to position the bearing securely for reliable operation, and its design determines the Type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, Barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Features

  • Round steel shaft for use with linear support blocks and closed type slide units in linear motion applications
  • Chrome plated for corrosion resistance
  • Case hardened for wear resistance
  • Precision ground grade 6 for consistent ball bushing radial clearance
  • Shaft diameter and length specified for accurate fit
  • See more on Amazon...

Brand: BC Precision   |   Manufacturer: BC Precision

Item Dimensions: 0.31 x 0.31 x 12.99 inches (0.8 x 0.8 x 33.0 cm)   |   Package Dimensions: 0.2 x 1.8 x 13.6 inches (0.5 x 4.6 x 34.5 cm)

First Available: 2018-02-01

Amazon Price: $11.75 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 24 hours
List Price: $11.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

4pcs SBR20UU Aluminum Block 20mm Linear Motion Ball Bearing Slide Block Match For SBR20 20mm Linear Guide Rail

Model: SBR20   |    Mpn: SBR20   |    Ean: 0785004503244   |    PartNumber: SBR20   |   Asin: B073VGCDSQ

Package include:

4 x SBR20UU Liner bearing block

Main parts:Aluminum housing + LM20UU-OPen linear ball bearings
Main application:working with SBR series linear rails.

Specification:
Model Number:SBR20UU
The built-in material: Bearing Steel
The external material :Aluminum Alloy
Bore size:20MM
Main application: working with SBR series linear rails.

Features

  • Cooperate with open linear bearing to ensure excellent sports performance
  • The external material :Aluminum Alloy
  • 100% Brand new and high quality
  • sports performance under high load or long stroke
  • Smooth moving,low friction,high performance and long life
  • See more on Amazon...

Brand: RATTMMOTOR   |   Manufacturer: Lishui

Package Dimensions: 3.5 x 4.5 x 6 inches (8.9 x 11.4 x 15.2 cm)

Amazon Price: $28.80 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 24 hours
List Price: $28.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

4pc 2020 400mm CNC 3D Printer Parts European Standard Anodized Linear Rail Aluminum Profile Extrusion for DIY 3D Printer

 Ean: 5603014875623   |    PartNumber: LXC007-4   |   Asin: B07459NK2Y

Please note : Picture just as a reference.the actual delivered goods shall prevail ! Type : European standard 2020 Aluminum Profile Material : Aluminum 6063-T5 Please check which Length and the Quantity you need . Inciuding : 4pc Aluminum Profile

Features

  • High strength aluminum extrusion
  • Standard 6mm T slot (NOT V-slot)
  • Ideal for 3D printer and CNC build
  • High-quality and service
  • See more on Amazon...

Brand: Ogry   |   Manufacturer: Ogry

Package Dimensions: 2.17 x 2.32 x 16.69 inches (5.5 x 5.9 x 42.4 cm)

Amazon Price: $22.99 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 24 hours
List Price: $22.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Happybuy Linear Rail 15-1500mm 2X Linear Guideway Rail 4X Square Type Carriage Bearing Block Linear Rail Support for 15mm Slotted Bearings

 Ean: 0601285862095   |    PartNumber: Linear Rail   |   Asin: B06VVXT19J

Introduction

The material is the high quality steel, extend the service life of the shaft and the machine. The shaft is case hardened, If you use normal steel shaft,The bearings will be reduce in use process.Besides, it's more durable than Plastic linear bearing. Move smoothly without deflection, minimal wear and low noise.

Feartures

Steel material and hardened Case

Pre-drilled holes on the support rail mounts

High accuracy and strong durability

Accept customized length and assembly

Parameter

Rail width: 5mm

Rail length: 1500mm

Material: Gcr15 steel

Weight: 14lbs

Package dimensions: 60"X5"X3"

Package:

2pcs 15-1500mm linear guideway length 300mm

4pcs square type carriage bearing block internal width 34mm

Features

  • Rail width 5mm; Rail length1500mm
  • Steel material support rail with pre-drilled holes for ease of mounting
  • There are 4 square carriage blocks,so that you can assembly to the flange type and rectangular
  • It can move smoothly without deflection minimal wear and low noise, because the high accuracy and strong durability
  • The Rail guide is widely used in the automation machinery such as machine tool,bending machines, laser welding machines, etc
  • See more on Amazon...

Brand: Happybuy   |   Manufacturer: Happybuy

Package Dimensions: 3.1 x 3.8 x 60.6 inches (7.9 x 9.7 x 153.9 cm)

Amazon Price: $138.89 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 1-2 business days
List Price: $138.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Eowpower Linear Motion Rod 8 mm x 406 mm Shaft, 15.98" Length Round, Case Hardened, Chrome Plated Bar

Model: 02-001-009   |    Mpn: 02-001-016   |    PartNumber: 02-001-016   |   Asin: B0758825TV

Hardness: HRC60
Precision: g6
Surface roughness: Below 1.5 M(Rmax)
Hard-thickness: 0.8 ~3mm
Straightness: Below 5 M/100mm

The high-carbon steel shaft is chrome plated for corrosion resistance,Used as automatic CNC lathe driller etc

Features

  • 8mm round linear rod
  • Outer Diameter: 8mm
  • Size: 8 X 406mm(0.31 X 15.98),D*L
  • Material: bearing steel
  • Weight:129g
  • See more on Amazon...

Brand: Eowpower   |   Manufacturer: Eowpower

Package Dimensions: 2.36 x 2.36 x 17.72 inches (6.0 x 6.0 x 45.0 cm)

Amazon Price: $8.99 | as of 11/14/2018(12:23am pst)
Availibility:
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

400mm Length Travel Linear Stage Actuator With Square Linear Rails + CBX1605 Ball Screw 1605 Ballscrew Motorized XY XYZ Linear Stage Table With NEMA23 Stepper Motor for DIY CNC Router Milling Machine

Model: CBX1605-400A   |    Mpn: CBX1605-400A   |    Ean: 0654615632677   |    PartNumber: CBX1605-400A   |   Asin: B078CYDBST

Package include:

1pcs CBX1605 ballscrew 400mm length Linear Stage Actuator with 1pcs NEMA23 RTM23HS6430 2-Phase Stepper motor

Stepper motor Parameter:

Name: RTM23HS6430
Step angle: 1.8 degree
Motor flange size: 57mm
Motor length: 56mm
Holding torque: 1.2N.m
Current: 3A
Resistance: 0.8 ohm
Inductance: 2.4 mH
Rotor Inertia: 440g.cm
Lead wire: 4pcs
Wiring:
Red: A+
Green: A-
Yellow: B+
Blue: B-

Linear Stage Actuator Parameter
Series: CBX1605-400A
Profile Width: 42mm
Drive Type: CBX1605 Ballscrew
Screw precision grade: C7
Screw Pitch: 5mm
Linear Type: Square Linear Rails
Bearing Type: Single Square HGH Carriages
Motor Type: 2-Phase Nema23 High torque Stepper Motor
Effective Travel Length: 400mm / 15.74 inch
Accuracy: 0.03mm / 0.001inch
Max. Speed: 50mm/s,2inch/s
Horizontal load: 30Kgs / 66.2lbs
Vertical load: 10Kgs / 44lbs
Axial Load Capacity: 22Kgs / 44lbs
Overall Length: 566 mm

We accept 100-1500mm Length Customize

Features

  • Use CBX precision 1605 ballscrew
  • 1Pcs NEMA23 RTM23HS6430 2-Phase Stepper motor are include without motor driver
  • Repeat positioning accuracy of up to 0.03mm
  • Effective Travel Length 400mm / 15.74 inch ,We accept 100-1500mm Length Customize
  • Beads screw for movement structural elements executed. With high precision, high efficiency, long life, low coefficient of friction, versatility, etc
  • See more on Amazon...

Brand: RATTMMOTOR   |   Manufacturer: Rattmmotor company

Package Dimensions: 2.6 x 3.6 x 23.1 inches (6.6 x 9.1 x 58.7 cm)

Amazon Price: $138.00 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 24 hours
List Price: $138.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

8mm x 406mm (.315" x 16") Case Hardened Chrome Linear Motion Rod/Shaft / Guide - Metric G6 Tolerance

Model: BC8406-1   |    Mpn: BC8406-1   |    Ean: 0692128473417   |    PartNumber: BC8406-1   |   Asin: B01LYXHTHI

This linear motion shaft of 8 mm in diameter and 406 mm in Length is chrome plated and case hardened, and is suitable for use with linear support blocks and closed Type slide units in linear motion applications. The high-carbon steel shaft is chrome plated for corrosion resistance, case hardened for wear resistance, and precision ground for consistent ball Bushing radial clearance. The shaft diameter and Length are specified for accurate fit and this shaft is suitable for use in applications, such as measuring systems, printing equipment, and computer numerical control (CNC) tools. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or Weldment to position the bearing securely for reliable operation, and its design determines the Type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, Barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Features

  • Round steel shaft for use with linear support blocks and closed type slide units in linear motion applications
  • Chrome plated for corrosion resistance
  • Case hardened for wear resistance
  • Precision ground grade 6 for consistent ball bushing radial clearance
  • Shaft diameter and length specified for accurate fit
  • See more on Amazon...

Brand: BC Precision   |   Manufacturer: BC Precision

Item Dimensions: 0.31 x 0.31 x 15.98 inches (0.8 x 0.8 x 40.6 cm)   |   Package Dimensions: 0.2 x 0.3 x 16.4 inches (0.5 x 0.8 x 41.7 cm)

First Available: 2018-02-05

Amazon Price: $10.25 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 24 hours
List Price: $10.25

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Iverntech 4pcs 150mm V-Slot 2020 European Standard Anodized Linear Rail Aluminum Profile Extrusion for DIY 3D Printer

 PartNumber: AW049   |   Asin: B07GRJXFF6

Packing list:

4 x 150mm 2020 Aluminum Profile

Features

  • 150mm V-Slot 2020 European standard aluminum profile
  • Compatible with all 20 series accessories like M3, M4, M5 T nuts, and V slot wheel pulley
  • 6105-T5, Clear Anodized Aluminum
  • Packing with 4Pcs
  • See more on Amazon...

Brand: Iverntech   |   Manufacturer: Iverntech

Package Dimensions: 1.57 x 1.57 x 6.3 inches (4.0 x 4.0 x 16.0 cm)

Amazon Price: $10.99 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 24 hours
List Price: $10.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

OrangeA Linear Rail 2 Set SBR 20-650mm 2xLinear Rail Guide and 4X Bearing Blocks Set Guideway Square Type for Automated Machines and Equipments

 Ean: 0601707143986   |    PartNumber: linear rail   |   Asin: B07DC1D3GK

Description

2 pieces of 650 mm/25.6" long SBR20 rail shafts and 4 SBR20UU bearing blocks.

The rail shafts are made with good quality steel and aluminum alloy. Cylindrical guide composed by principal rail and aluminum support, stabilizing the original rail. Sliding blocks to be used cooperatively with rails, smooth sliding provided by inside linear bearing.

The linear rail apply for various kinds of automated machines and equipments,can help build economical linear guiding system.Applicable for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.

Feature

650mm/25.5" long SBR20 rail shaft

4 SBR20UU blocks with smooth sliding

Helps to build economical linear guiding system

Specifications

Feature: Smooth motion

Performance: Low noise

Diameter: 20 mm (0.78")

Rail Shafts: 2 X SBR20, 650 mm (25.5")

Package Content

2 X SBR20 650 mm/25.5" Fully Supported Linear Rail Shafts

4 X SBR20UU Bearing Blocks

Features

  • The linear rail length:650mm/25.6",diameter:20mm/0.78"
  • 2 pieces of 650 mm/25.6 long SBR20 rail shafts and 4 SBR20UU bearing blocks
  • Cylindrical guide composed by principal rail and aluminum support, stabilizing the original rail
  • The linear rail can help build economical linear guiding system
  • The linear rails apply for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc
  • See more on Amazon...

Brand: OrangeA   |   Manufacturer: OrangeA

Package Dimensions: 4 x 4 x 27 inches (10.2 x 10.2 x 68.6 cm)

Amazon Price: $92.99 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 1-2 business days
List Price: $129.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

OrangeA SBR Linear Rail 16-800mm 2xLinear Guideway Rail and 4x Bearing Block Guideway Square Type For Automated Machines and Equipments

 Ean: 0601707143962   |    PartNumber: Linear Guideway Rail   |   Asin: B07D9JRPG9

Description

2 pieces of 800mm/31.5" long SBR16 rail shafts and 4 SBR16UU blocks.

Perfect combination of main axle and aluminum alloy support, which nicely stabilizes the original rail. Premier quality bearing blocks moves smoothly while using.

The linear rail apply for various kinds of automated machines and equipments,can Help build economical linear guiding system.Applicable for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.

Feature

Cylindrical guide composed by principal rail and aluminum support, stabilizing the original rail.

Sliding blocks to be used cooperatively with rails, smooth sliding provided by inside linear bearing.

4 SBR16UU blocks with smooth sliding

The linear rail can help build economical linear guiding system.

The linear guide way rail 4 square carriage blocks,so that you can assembly to the flange type and rectangular

Specifications

Type: Linear Slide Rail Set

Feature: Smooth motion

Performance: Low noise

Bearing Blocks: 4 pieces, SBR16UU

Rail Shafts: SBR16, 800 mm (31.5")

Package Content

2 X SBR16-800 mm/31.5" Linear Slide Guide Fully-supported Rails

4 X SBR16UU Bearing Blocks

Features

  • The linear rail length:800mm/31.5",diameter:16mm/0.63"
  • 2 pieces of 800mm/31.5 long SBR16 rail shafts and 4 SBR16UU blocks
  • Cylindrical guide composed by principal rail and aluminum support, stabilizing the original rail
  • The linear guideway rail can help build economical linear guiding system
  • The linear rails apply for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc
  • See more on Amazon...

Brand: OrangeA   |   Manufacturer: OrangeA

Package Dimensions: 3.54 x 3.94 x 34.25 inches (9.0 x 10.0 x 87.0 cm)

Amazon Price: $68.99 | as of 11/14/2018(12:23am pst)
Availibility: Usually ships in 1-2 business days
List Price: $75.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. ReliaBot 2PCs 8mm x 500mm (.315" x 19.67") Case Hardened Chrome Plated Linear Motion Rod/Shaft / Gui...
  2. Two (2) 12mm x 762mm (.472" x 30") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric ...
  3. Pack of 4Pcs SK12 SH12A 12mm Linear Rail Shaft Support Block for CNC Linear Slide Bearing Guide CNC ...
  4. OrangeA Linear Rail 15-1500mm 2xLinear Guideway Rail 4x Square Type Carriage Bearing Block Linear Ra...
  5. 4pc 2020 CNC 3D Printer Parts European Standard Anodized Linear Rail Aluminum Profile Extrusion for ...
  6. Sydien 4pcs SK10 Aluminum Linear Motion Rail Clamping Guide Support Bracket for 10mm Diameter Shaft
  7. Two (2) 12mm x 330mm (.472" x 13") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric ...
  8. Manual Sliding Table 100mm Ballscrew 1605 Linear Rail Guide Slide Stage C7 Travel Length 4" DIY CNC ...

Most Wished For

  1. ReliaBot 2PCs 8mm x 500mm (.315" x 19.67") Case Hardened Chrome Plated Linear Motion Rod/Shaft / Gui...
  2. Two (2) 12mm x 762mm (.472" x 30") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric ...
  3. Pack of 4Pcs SK12 SH12A 12mm Linear Rail Shaft Support Block for CNC Linear Slide Bearing Guide CNC ...
  4. OrangeA Linear Rail 15-1500mm 2xLinear Guideway Rail 4x Square Type Carriage Bearing Block Linear Ra...
  5. 4pc 2020 CNC 3D Printer Parts European Standard Anodized Linear Rail Aluminum Profile Extrusion for ...
  6. Sydien 4pcs SK10 Aluminum Linear Motion Rail Clamping Guide Support Bracket for 10mm Diameter Shaft
  7. Two (2) 12mm x 330mm (.472" x 13") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric ...
  8. Manual Sliding Table 100mm Ballscrew 1605 Linear Rail Guide Slide Stage C7 Travel Length 4" DIY CNC ...

Most Gifted

  1. ReliaBot 2PCs 8mm x 500mm (.315" x 19.67") Case Hardened Chrome Plated Linear Motion Rod/Shaft / Gui...
  2. Two (2) 12mm x 762mm (.472" x 30") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric ...
  3. Pack of 4Pcs SK12 SH12A 12mm Linear Rail Shaft Support Block for CNC Linear Slide Bearing Guide CNC ...
  4. OrangeA Linear Rail 15-1500mm 2xLinear Guideway Rail 4x Square Type Carriage Bearing Block Linear Ra...
  5. 4pc 2020 CNC 3D Printer Parts European Standard Anodized Linear Rail Aluminum Profile Extrusion for ...
  6. Sydien 4pcs SK10 Aluminum Linear Motion Rail Clamping Guide Support Bracket for 10mm Diameter Shaft
  7. Two (2) 12mm x 330mm (.472" x 13") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric ...
  8. Manual Sliding Table 100mm Ballscrew 1605 Linear Rail Guide Slide Stage C7 Travel Length 4" DIY CNC ...

Top Selling

  1. ReliaBot 2PCs 8mm x 500mm (.315" x 19.67") Case Hardened Chrome Plated Linear Motion Rod/Shaft / Gui...
  2. Two (2) 12mm x 762mm (.472" x 30") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric ...
  3. Pack of 4Pcs SK12 SH12A 12mm Linear Rail Shaft Support Block for CNC Linear Slide Bearing Guide CNC ...
  4. OrangeA Linear Rail 15-1500mm 2xLinear Guideway Rail 4x Square Type Carriage Bearing Block Linear Ra...
  5. 4pc 2020 CNC 3D Printer Parts European Standard Anodized Linear Rail Aluminum Profile Extrusion for ...
  6. Sydien 4pcs SK10 Aluminum Linear Motion Rail Clamping Guide Support Bracket for 10mm Diameter Shaft
  7. Two (2) 12mm x 330mm (.472" x 13") Case Hardened Chrome Linear Motion Rods/Shafts / Guides - Metric ...
  8. Manual Sliding Table 100mm Ballscrew 1605 Linear Rail Guide Slide Stage C7 Travel Length 4" DIY CNC ...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.