Frontpage > Industrial > Power Transmission > Needle Roller Bearings

Best Needle Roller Bearings - Buying Guide

Last Updated: 01/20/2020

Share on

Bestselling Needle Roller Bearings on Amazon

  1. uxcell Tc613 Needle Roller Thrust Bearings with Washers 3/8-inch Bore 13/16-inch Od 5/64-inch Width ...
  2. Traxxas 5211R Roller Clutch (One Way Bearing), TRX 2.5, 2.5R, 3.3
  3. uxcell Tc815 Needle Roller Thrust Bearings with Washers 1/2-inch Bore 15/16-inch Od 5/64-inch Width ...
  4. NMD NTA1220 Thrust Needle Roller Bearing with Two Washers 3/4" X 1-1/4" X 5/64" BAB217
  5. Koyo BH-3316 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 2-1/16" ID, 2-17/32" OD, ...
  6. Koyo JR17X20X20,5 Needle Roller Bearing Inner Ring, Mounting Chamfers, Metric, 17mm ID, 20mm OD, 20....
  7. uxcell RCB121616 Needle Roller Bearings, One Way Bearing, 3/4" Bore 1" OD 1" Width 2pcs
  8. Koyo B-148 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 7/8" ID, 1-1/8" OD, 1/2" Wi...
  9. SCE78, 7/16 x 5/8 x 1/2 inch, Needle Bearing
  10. uxcell NK12/12 Machined Ring Needle Roller Bearing, 12mm Bore, 19mm OD, 12mm Width 6400N Static Load...

  #1

uxcell Tc613 Needle Roller Thrust Bearings with Washers 3/8-inch Bore 13/16-inch Od 5/64-inch Width 23000rpm Limiting Speed 5pcs

 PartNumber: a19043000ux0095   |   Asin: B07VWT1X34


Description: This Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces. These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly. Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
Specification: Bearing No.: TC613+2TRA Needle Roller Material: Chromium Steel (GCr15) Cage Material: ST14 Steel Bore Diameter (d): 3/8" / 9.525mm Outside Diameter (D): 13/16" / 20.64mm Bearing Thickness (T1): 5/64" / 1.984mm Washer Thickness (T2): 0.8mm Total Thickness: 3.584mm Dynamic Load Capacity (Cr): 4848N Static Load Capacity (Cor): 12188N Maximum Rotational Speed (Oil): 23000rpm Number of Pack: 5 Pcs

Features

  • Model: TC613+2TRA (Bore Dia. (d)=3/8", Outer Dia. (D)=13/16", Total Thickness=3.584mm)
  • Needle Roller Thrust Bearings can accommodate axial loads in one direction only
  • Combined with two thrust washers for applications where adjacent machine components cannot serve as raceways
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, chromium steel rollers for heat tolerance and durability under heavy loads
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 0.12 x 3.82 x 6.26 inches (0.3 x 9.7 x 15.9 cm)

Amazon Price: $6.99 | as of 01/20/2020(6:08pm pst)
Availibility:
List Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Traxxas 5211R Roller Clutch (One Way Bearing), TRX 2.5, 2.5R, 3.3

Model: TRA5211R   |    Mpn: 5211R   |    Ean: 0754295428383   |    PartNumber: 5211R   |   Asin: B000H7MM7U

Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX 2.5, 2.5R, 3.3) Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

Features

  • Roller clutch (also called one-way bearing)
  • 6 x 8 x 0.5 TW
  • Fits TRX 2.5, 2.5R, 3.3
  • Remove and clean the bearing after every half gallon.
  • Lubricate with 5w-30
  • Use a teflon washer between the bearing and backplate
  • See more on Amazon...

Brand: Traxxas   |   Manufacturer: Traxxas

Item Dimensions: 3.13 x 0.38 x 7.5 inches (8.0 x 1.0 x 19.1 cm)   |   Package Dimensions: 0.2 x 2.9 x 7 inches (0.5 x 7.4 x 17.8 cm)

Amazon Price: $22.49 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $22.50

Warranty: No Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

uxcell Tc815 Needle Roller Thrust Bearings with Washers 1/2-inch Bore 15/16-inch Od 5/64-inch Width 19000rpm Limiting Speed 2pcs

 PartNumber: a19043000ux0102   |   Asin: B07VYW4XJH


Description: This Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces. These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly. Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
Specification: Bearing No.: TC815+2TRA Needle Roller Material: Chromium Steel (GCr15) Cage Material: ST14 Steel Bore Diameter (d): 1/2" / 12.7mm Outside Diameter (D): 15/16" / 23.8mm Bearing Thickness (T1): 5/64" / 1.984mm Washer Thickness (T2): 0.8mm Total Thickness: 3.584mm Dynamic Load Capacity (Cr): 5738N Static Load Capacity (Cor): 16280N Maximum Rotational Speed (Oil): 19000rpm Number of Pack: 2 Pcs

Features

  • Model: TC815+2TRA (Bore Dia. (d)=1/2", Outer Dia. (D)=15/16", Total Thickness=3.584mm)
  • Needle Roller Thrust Bearings can accommodate axial loads in one direction only
  • Combined with two thrust washers for applications where adjacent machine components cannot serve as raceways
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, chromium steel rollers for heat tolerance and durability under heavy loads
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 0.79 x 3.82 x 5.08 inches (2.0 x 9.7 x 12.9 cm)

Amazon Price: $5.49 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

NMD NTA1220 Thrust Needle Roller Bearing with Two Washers 3/4" X 1-1/4" X 5/64" BAB217

 Ean: 0638563101201   |    PartNumber: NTA1220   |   Asin: B07P7RG1BL

Excellent quality thrust needle roller bearing

Features

Brand: NMD   |   Manufacturer: NMD

Amazon Price: $7.99 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Koyo BH-3316 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 2-1/16" ID, 2-17/32" OD, 1" Width, 4000rpm Maximum Rotational Speed

Model: BH-3316   |    Mpn: BH-3316   |    Ean: 0605790185137   |    PartNumber: BH-3316   |   Asin: B007EDW9KA

This Koyo full complement drawn cup needle roller bearing is suitable for applications with high dynamic loads. It has a smaller cross-section than a machined needle roller bearing for use in restricted mounting spaces. The full complement of rollers provides a higher radial load-carrying capacity than caged rollers. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance, and have contoured ends to optimize the distribution of contact stress. This radial needle roller bearing meets ASTM International standard ASTM F2162 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets standard ASTM F2162 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Package Dimensions: 1.9 x 3.3 x 3.4 inches (4.8 x 8.4 x 8.6 cm)

First Available: 2017-03-12

Amazon Price: $141.55 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $150.65

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Koyo JR17X20X20,5 Needle Roller Bearing Inner Ring, Mounting Chamfers, Metric, 17mm ID, 20mm OD, 20.5mm Width

Model: JR17X20X20,5   |    Mpn: JR17X20X20,5   |    Ean: 0605790195693   |    PartNumber: JR17X20X20,5   |   Asin: B007EDLEBA

This Koyo inner ring with mounting chamfers serves as an inner roller raceway in applications where the shaft cannot be used as a raceway, and is used with Koyo metric series caged needle roller bearings. It is made of hardened and ground steel, and has mounting chamfers to assist in bearing installation. This Koyo inner ring is an accessory for use with Koyo metric series needle roller bearings, which are used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Inner ring to provide a hardened and ground raceway for a needle roller bearing
  • Use with Koyo Torrington metric series caged needle roller bearings (sold separately)
  • Mounting chamfers assist in bearing installation
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Package Dimensions: 1 x 2.2 x 2.3 inches (2.5 x 5.6 x 5.8 cm)

Amazon Price: $11.51 | as of 01/20/2020(6:08pm pst)
Availibility:
List Price: $15.31

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

uxcell RCB121616 Needle Roller Bearings, One Way Bearing, 3/4" Bore 1" OD 1" Width 2pcs

 PartNumber: a19032000ux0797   |   Asin: B07RWLMM3P


Specification: Model: RCB121616 Drawn Cup Material: ST14 Steel Needle Roller Material: Chromium Steel (GCr15) Bore Diameter (Fw): 19.05mm / 3/4" Outside Diameter (D): 25.4mm / 1" Width: 25.4mm / 1" Torque: 20.9N*m Number of Pack: 2 Pcs
Description: -Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness. -These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing. -Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore. -For various applications such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others. -NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation or brittle fracture.

Features

  • Model: RCB121616 (I.D. (Fw)= 3/4inch, O.D. (D)= 1inch, Width (C)= 1inch)
  • ST14 steel drawn cup, GCr15 needle rollers one way clutch
  • Good heat tolerance, high load carrying capacity and stiffness
  • Low cross section, enable downsizing and suit for use in restricted mounting spaces
  • Pre-Lubricated. Good running properties
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 0.87 x 3.58 x 6.06 inches (2.2 x 9.1 x 15.4 cm)

Amazon Price: $12.19 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.19

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Koyo B-148 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 7/8" ID, 1-1/8" OD, 1/2" Width, 4800rpm Maximum Rotational Speed

Model: B-148   |    Mpn: B-148   |    Ean: 0605790206672   |    PartNumber: B-148   |   Asin: B007EDX64S

This Koyo full complement drawn cup needle roller bearing is suitable for applications with high dynamic loads. It has a smaller cross-section than a machined needle roller bearing for use in restricted mounting spaces. The full complement of rollers provides a higher radial load-carrying capacity than caged rollers. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance, and have contoured ends to optimize the distribution of contact stress. This radial needle roller bearing meets ASTM International standard ASTM F2162 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets standard ASTM F2162 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 1.12 x 0.5 x 0.87 inches (2.8 x 1.3 x 2.2 cm)   |   Package Dimensions: 0.9 x 2.2 x 2.3 inches (2.3 x 5.6 x 5.8 cm)

Amazon Price: $0.83 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $4.72

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

SCE78, 7/16 x 5/8 x 1/2 inch, Needle Bearing

 PartNumber: SCE78   |   Asin: B00E42RLDY

NB(0.4375x0.6250x0.5000) Caged Needle Bearing

Features

  • Inside diameter: 0.4375 Inch - Outside diameter: 0.625 Inch - Width: 0.5 Inch
  • Bearing Material: Cold Steel SheetST12, Needle Material: Chrome Steel 52100, ABEC#1/ISOP0
  • Enclosure #: Open
  • Retainer Material: Cold Steel SheetST12
  • See more on Amazon...

Brand: Boca Bearing Company   |   Manufacturer: Boca Bearing Company

Amazon Price: $5.73 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.73

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

uxcell NK12/12 Machined Ring Needle Roller Bearing, 12mm Bore, 19mm OD, 12mm Width 6400N Static Load 6050N Dynamic Load 25000rpm Limiting Speed 5pcs

 PartNumber: a19050800ux1073   |   Asin: B07V7VX5XM


Specification: Model: NK12/12 Inner and Outer Ring Material: Chromium Steel (GCr15) Cage Material: ST13 Steel Needle Roller Material: Chromium Steel (GCr15) Bore Diameter (d): 12mm Outside Diameter (D): 19mm Width (B): 12mm Static Load Capacity (Cor): 6400N Dynamic Load Capacity (Cr): 6050N Maximum Rotational Speed (Oil): 25000rpm
Package Content: 5 x Needle Roller Bearing
Description: -Needle Roller Bearings with Machined Rings are bearings with high load carrying capacity and stiffness. -These bearings are especially suitable for high dynamic loads or radial-limited installation. -Assembling inner and outer rings separately permits interference fits for shaft and housing. -For various applications such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others. -NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation or brittle fracture.

Features

  • Model: NK12/12 (I.D. (Fw)=12mm, O.D. (D)=19mm, Width (C)=12mm)
  • With no inner ring, accommodate axial displacement
  • Good heat tolerance, high load carrying capacity and stiffness
  • Low cross section, enable downsizing and suit for use in restricted mounting spaces
  • Pre-Lubricated. Good running properties
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 0.63 x 3.74 x 5.59 inches (1.6 x 9.5 x 14.2 cm)

Amazon Price: $11.49 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Koyo B-1212-OH Needle Roller Bearing, Full Complement Drawn Cup, Open, Oil Hole, Inch, 3/4" ID, 1" OD, 3/4" Width, 5500rpm Maximum Rotational Speed

Model: B-1212-OH   |    Mpn: B-1212-OH   |    Ean: 0605790197901   |    PartNumber: B-1212-OH   |   Asin: B007EDY5IY

This Koyo full complement drawn cup needle roller bearing is suitable for applications with high dynamic loads. It has a smaller cross-section than a machined needle roller bearing for use in restricted mounting spaces, and the cup has an oil hole for applying lubrication in place. The full complement of needle rollers provides a higher radial load capacity than caged rollers. The rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance. This drawn cup needle roller bearing meets American National Standards Institute/American Bearing Manufacturers Association ANSI/ABMA 18.2 and ASTM International standard ASTM F2162 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Full complement of rollers for greater load capacity than caged bearings
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Oil hole for applying lubrication in place
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 1 x 0.75 x 0.75 inches (2.5 x 1.9 x 1.9 cm)   |   Package Dimensions: 0.9 x 2.2 x 2.3 inches (2.3 x 5.6 x 5.8 cm)

Amazon Price: $4.95 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.95 | Used Price: $5.43

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

INA SCE108 Needle Roller Bearing, Caged Drawn Cup, Steel Cage, Open End, Inch, 5/8" ID, 13/16" OD, 1/2" Width, 17600rpm Maximum Rotational Speed, 2700lbf Static Load Capacity, 1830lbf Dynamic Load Capacity

Model: INA-SCE108   |    Mpn: SCE108   |    Ean: 4047643195737   |    PartNumber: SCE108   |   Asin: B006KT1B2G

This INA caged drawn cup needle roller bearing has a steel cage and is suitable for applications with high dynamic loads. It has a smaller cross-section than a machined needle roller bearing for use in restricted mounting spaces. The steel cage provides guidance and even spacing of the rollers for minimum vibration and noise at high speeds. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance. The bearing can be used at temperatures up to 284 degrees F (140 degrees C). This drawn cup needle roller bearing meets American National Standards Institute/American Bearing Manufacturers Association standard ANSI/ABMA 18.2-1982 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

INA manufactures bearings for automotive and industrial applications. The company is part of the Schaeffler Group, founded in 1946 in Herzogenaurach, Germany, and meets International Organization for Standardization (ISO) standards 9001:2008 and TS 16949:2009 for quality assurance.

Features

  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets standard ANSI/ABMA 18.2-1982 for quality assurance
  • See more on Amazon...

Brand: INA   |   Manufacturer: INA

Item Dimensions: 0.5 x 2 x 2.1 inches (1.3 x 5.1 x 5.3 cm)   |   Package Dimensions: 0.51 x 2.95 x 5.47 inches (1.3 x 7.5 x 13.9 cm)

Amazon Price: $1.79 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.25 | Used Price: $7.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

uxcell HF081412 Needle Roller Bearings, One Way Bearing, 8mm Bore 14mm OD 12mm Width 3pcs

 PartNumber: a19032000ux0817   |   Asin: B07RT6WLTG


Specification: Model: HF081412 Drawn Cup Material: ST14 Steel Needle Roller Material: Chromium Steel (GCr15) Bore Diameter (Fw): 8mm Outside Diameter (D): 14mm Width: 12mm Torque: 5N*m Rotating Shaft Limiting Speed: 16000rpm Rotating Outer Ring Limiting Speed: 12000rpm Number of Pack: 3 Pcs
Description: -Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness. -These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing. -Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore. -For various applications such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others. -NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation or brittle fracture.

Features

  • Model: HF081412 (I.D. (Fw)= 8mm, O.D. (D)= 14mm, Width (C)= 12mm)
  • ST14 steel drawn cup, GCr15 needle rollers one way clutch
  • Good heat tolerance, high load carrying capacity and stiffness
  • Low cross section, enable downsizing and suit for use in restricted mounting spaces
  • Pre-Lubricated. Good running properties
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 0.5 x 3.1 x 3.3 inches (1.3 x 7.9 x 8.4 cm)

Amazon Price: $8.99 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

ATOPLEE AXK0819+2AS Thrust Needle Roller Bearings 1pc Cage Needle + 2pcs Washers [ 8x19mm, 10pcs]

Model: AXK0819+2AS   |    Mpn: AXK0819+2AS   |    Ean: 0769700160703   |    PartNumber: AXK0819+2AS   |   Asin: B018TZNPW2

Specifications:



Material: bearing steel

Item color: silver tone

Item components: 1pc cage needle + 2pcs washers

Bearing thickness: 2mm

Total thickness: 4mm

Model: AXK0819+2AS

Inner Diameter*Outer Diameter:8*19mm

Total weight:approx 5g



Package Included:



10pcs Thrust Needle Roller Bearings

Features

  • Material: bearing steel, Item color: silver tone
  • Inner Diameter*Outer Diameter:8*19mm,Total weight:approx 5g
  • Item components: 1pc cage needle + 2pcs washers
  • High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads.
  • Suitable for the general usage of meter machine, pipeline system, mold mold production.
  • See more on Amazon...

Brand: ATOPLEE   |   Manufacturer: ATOPLEE

Package Dimensions: 0.2 x 4.8 x 6.5 inches (0.5 x 12.2 x 16.5 cm)

Amazon Price: $8.49 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

TORRINGTON B1212 Needle Roller Bearing

Model: B-1212   |    Mpn: B-1212   |    Ean: 0605790202766   |    PartNumber: B-1212   |   Asin: B006KT1DKQ

This Koyo full complement drawn cup needle roller bearing is suitable for applications with high dynamic loads. It has a smaller cross-section than a machined needle roller bearing for use in restricted mounting spaces. The full complement of rollers provides a higher radial load-carrying capacity than caged rollers. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance, and have contoured ends to optimize the distribution of contact stress. This radial needle roller bearing meets ASTM International standard ASTM F2162 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets standard ASTM F2162 for quality assurance
  • See more on Amazon...

Brand: Torrington   |   Manufacturer: Koyo Torrington

Item Dimensions: 1 x 0.75 x 0.75 inches (2.5 x 1.9 x 1.9 cm)   |   Package Dimensions: 1.02 x 2.13 x 2.2 inches (2.6 x 5.4 x 5.6 cm)

Amazon Price: $4.59 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

uxcell RC081208 Needle Roller Bearings, One Way Bearing, 1/2" Bore 3/4" OD 1/2" Width 5pcs

 PartNumber: a19032000ux0813   |   Asin: B07RWN26JZ


Specification: Model: RC081208 Drawn Cup Material: ST14 Steel Needle Roller Material: Chromium Steel (GCr15) Bore Diameter (Fw): 1/2" Outside Diameter (D): 3/4" Width: 1/2" Torque: 7.9N*m Number of Pack: 5 Pcs
Description: -Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness. -These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing. -Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore. -For various applications such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others. -NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation or brittle fracture.

Features

  • Model: RC081208 (I.D. (Fw)= 1/2inch, O.D. (D)= 3/4inch, Width (C)= 1/2inch)
  • ST14 steel drawn cup, GCr15 needle rollers one way clutch
  • Good heat tolerance, high load carrying capacity and stiffness
  • Low cross section, enable downsizing and suit for use in restricted mounting spaces
  • Pre-Lubricated. Good running properties
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 0.59 x 4.02 x 5.55 inches (1.5 x 10.2 x 14.1 cm)

Amazon Price: $9.99 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

INA SCE68 Needle Roller Bearing, Steel Cage, Open End, Inch, 3/8" ID, 9/16" OD, 1/2" Width, 29500rpm Maximum Rotational Speed, 1490lbf Static Load Capacity, 1300lbf Dynamic Load Capacity

Model: SCE68   |    Mpn: SCE68   |    Ean: 4047643194006   |    PartNumber: SCE68   |   Asin: B00207GHLM

This INA caged drawn cup needle roller bearing has a steel cage and is suitable for applications with high dynamic loads. It has a smaller cross-section than a machined needle roller bearing for use in restricted mounting spaces. The steel cage provides guidance and even spacing of the rollers for minimum vibration and noise when operated at high speeds. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance. The bearing can be used at temperatures from -4 to 248 degrees F (-20 to 120 degrees C). This drawn cup needle roller bearing meets American National Standards Institute/American Bearing Manufacturers Association standard ANSI/ABMA 18.2-1982 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

INA manufactures bearings for automotive and industrial applications. The company is part of the Schaeffler Group, founded in 1946 in Herzogenaurach, Germany, and meets International Organization for Standardization (ISO) standards 9001:2008 and TS 16949:2009 for quality assurance.

Features

  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets standard ANSI/ABMA 18.2-1982 for quality assurance
  • See more on Amazon...

Brand: INA   |   Manufacturer: INA

Item Dimensions: 2.1 x 0.7 x 2.1 inches (5.3 x 1.8 x 5.3 cm)   |   Package Dimensions: 1 x 1 x 2 inches (2.5 x 2.5 x 5.1 cm)

Amazon Price: $4.12 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $5.79 | Used Price: $4.32

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Koyo TRD-3648 Thrust Roller Bearing Washer, TR Type, Open, Inch, 2-1/4" ID, 3" OD, 1/8" Width

Model: TRD-3648   |    Mpn: TRD-3648   |    Ean: 0605790188794   |    PartNumber: TRD-3648   |   Asin: B006KT3BOC

This Koyo TR-series thrust roller bearing washer is designed for use with Koyo NTA-series thrust needle roller and cage assemblies in applications where adjacent components cannot serve as raceways. This thrust washer serves as a raceway surface for the thrust assembly s rolling elements and can be used as a shaft washer (bore-piloting washer) fixed on the shaft or a housing washer (outer diameter-piloting washer) fixed in the housing. Both sides of the washer can be used as raceways and are flush ground for higher speeds and greater running accuracy than unground raceways. The washer is made of low alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads. This thrust washer is for use in various applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009 and headquartered in Canton, OH, meets International Organization for Standardization Technical Specification (ISO/TS) standard 16949 and ISO standard 14001.

Features

  • Thrust washer for use with Koyo Torrington NTA-series thrust needle roller and cage assemblies in applications where adjacent components cannot serve as raceways
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads
  • Flush-ground raceways for higher speeds and greater running accuracy than unground raceways
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Package Dimensions: 1.1 x 3.3 x 3.4 inches (2.8 x 8.4 x 8.6 cm)

Amazon Price: $5.25 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.46

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Koyo B-1412 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 7/8" ID, 1-1/8" OD, 3/4" Width, 4800rpm Maximum Rotational Speed, 10200lbf Static Load Capacity, 5370lbf Dynamic Load Capacity

Model: B-1412   |    Mpn: B-1412   |    Ean: 0605790202773   |    PartNumber: B-1412   |   Asin: B006KT1DRE

This Koyo full complement drawn cup needle roller bearing is suitable for applications with high dynamic loads. It has a smaller cross-section than a machined needle roller bearing for use in restricted mounting spaces. The full complement of rollers provides a higher radial load-carrying capacity than caged rollers. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance, and have contoured ends to optimize the distribution of contact stress. This radial needle roller bearing meets ASTM International standard ASTM F2162 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Drawn cup needle roller bearing for applications with high dynamic loads
  • Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets standard ASTM F2162 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 1.12 x 0.75 x 0.87 inches (2.8 x 1.9 x 2.2 cm)   |   Package Dimensions: 0.9 x 2.2 x 2.2 inches (2.3 x 5.6 x 5.6 cm)

Amazon Price: $5.91 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.46

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

NMD Brand HK1210 Needle Roller Bearing 12x16x10 A309

 Ean: 0638563101713   |    PartNumber: NMD   |   Asin: B07YVMP8HY

You are buying an excellent quality bearing

Features

Brand: NMD   |   Manufacturer: NMD

Amazon Price: $6.99 | as of 01/20/2020(6:08pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $6.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. uxcell Tc613 Needle Roller Thrust Bearings with Washers 3/8-inch Bore 13/16-inch Od 5/64-inch Width ...
  2. Traxxas 5211R Roller Clutch (One Way Bearing), TRX 2.5, 2.5R, 3.3
  3. uxcell Tc815 Needle Roller Thrust Bearings with Washers 1/2-inch Bore 15/16-inch Od 5/64-inch Width ...
  4. NMD NTA1220 Thrust Needle Roller Bearing with Two Washers 3/4" X 1-1/4" X 5/64" BAB217
  5. Koyo BH-3316 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 2-1/16" ID, 2-17/32" OD, ...
  6. Koyo JR17X20X20,5 Needle Roller Bearing Inner Ring, Mounting Chamfers, Metric, 17mm ID, 20mm OD, 20....
  7. uxcell RCB121616 Needle Roller Bearings, One Way Bearing, 3/4" Bore 1" OD 1" Width 2pcs
  8. Koyo B-148 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 7/8" ID, 1-1/8" OD, 1/2" Wi...
  9. SCE78, 7/16 x 5/8 x 1/2 inch, Needle Bearing
  10. uxcell NK12/12 Machined Ring Needle Roller Bearing, 12mm Bore, 19mm OD, 12mm Width 6400N Static Load...

Most Wished For

  1. uxcell Tc613 Needle Roller Thrust Bearings with Washers 3/8-inch Bore 13/16-inch Od 5/64-inch Width ...
  2. Traxxas 5211R Roller Clutch (One Way Bearing), TRX 2.5, 2.5R, 3.3
  3. uxcell Tc815 Needle Roller Thrust Bearings with Washers 1/2-inch Bore 15/16-inch Od 5/64-inch Width ...
  4. NMD NTA1220 Thrust Needle Roller Bearing with Two Washers 3/4" X 1-1/4" X 5/64" BAB217
  5. Koyo BH-3316 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 2-1/16" ID, 2-17/32" OD, ...
  6. Koyo JR17X20X20,5 Needle Roller Bearing Inner Ring, Mounting Chamfers, Metric, 17mm ID, 20mm OD, 20....
  7. uxcell RCB121616 Needle Roller Bearings, One Way Bearing, 3/4" Bore 1" OD 1" Width 2pcs
  8. Koyo B-148 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 7/8" ID, 1-1/8" OD, 1/2" Wi...
  9. SCE78, 7/16 x 5/8 x 1/2 inch, Needle Bearing
  10. uxcell NK12/12 Machined Ring Needle Roller Bearing, 12mm Bore, 19mm OD, 12mm Width 6400N Static Load...

Most Gifted

  1. uxcell Tc613 Needle Roller Thrust Bearings with Washers 3/8-inch Bore 13/16-inch Od 5/64-inch Width ...
  2. Traxxas 5211R Roller Clutch (One Way Bearing), TRX 2.5, 2.5R, 3.3
  3. uxcell Tc815 Needle Roller Thrust Bearings with Washers 1/2-inch Bore 15/16-inch Od 5/64-inch Width ...
  4. NMD NTA1220 Thrust Needle Roller Bearing with Two Washers 3/4" X 1-1/4" X 5/64" BAB217
  5. Koyo BH-3316 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 2-1/16" ID, 2-17/32" OD, ...
  6. Koyo JR17X20X20,5 Needle Roller Bearing Inner Ring, Mounting Chamfers, Metric, 17mm ID, 20mm OD, 20....
  7. uxcell RCB121616 Needle Roller Bearings, One Way Bearing, 3/4" Bore 1" OD 1" Width 2pcs
  8. Koyo B-148 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 7/8" ID, 1-1/8" OD, 1/2" Wi...
  9. SCE78, 7/16 x 5/8 x 1/2 inch, Needle Bearing
  10. uxcell NK12/12 Machined Ring Needle Roller Bearing, 12mm Bore, 19mm OD, 12mm Width 6400N Static Load...

Top Selling

  1. uxcell Tc613 Needle Roller Thrust Bearings with Washers 3/8-inch Bore 13/16-inch Od 5/64-inch Width ...
  2. Traxxas 5211R Roller Clutch (One Way Bearing), TRX 2.5, 2.5R, 3.3
  3. uxcell Tc815 Needle Roller Thrust Bearings with Washers 1/2-inch Bore 15/16-inch Od 5/64-inch Width ...
  4. NMD NTA1220 Thrust Needle Roller Bearing with Two Washers 3/4" X 1-1/4" X 5/64" BAB217
  5. Koyo BH-3316 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 2-1/16" ID, 2-17/32" OD, ...
  6. Koyo JR17X20X20,5 Needle Roller Bearing Inner Ring, Mounting Chamfers, Metric, 17mm ID, 20mm OD, 20....
  7. uxcell RCB121616 Needle Roller Bearings, One Way Bearing, 3/4" Bore 1" OD 1" Width 2pcs
  8. Koyo B-148 Needle Roller Bearing, Full Complement Drawn Cup, Open, Inch, 7/8" ID, 1-1/8" OD, 1/2" Wi...
  9. SCE78, 7/16 x 5/8 x 1/2 inch, Needle Bearing
  10. uxcell NK12/12 Machined Ring Needle Roller Bearing, 12mm Bore, 19mm OD, 12mm Width 6400N Static Load...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.
As an Amazon Associate we earn from qualifying purchases.