Frontpage > Industrial > Power Transmission > Pillow Block Bearings

Best Pillow Block Bearings - Buying Guide

Last Updated: 01/17/2019

Share on

Bestselling Pillow Block Bearings on Amazon

  1. Two (2) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1" Inch Inside Diameter w/Set Screw Lock...
  2. Two (2) UCP204-12 Cast Iron Pillow Block Mounted Bearings - 3/4" Inch Inside Diameter w/ Set Screw L...
  3. Eowpower 4Pcs 8mm Bore Diameter Ball Mounted Pillow Block Insert Bearing
  4. 2 Pieces- UCP204-12, 3/4 inch Pillow Block Bearing Solid Base,Self-Alignment, Brand New
  5. Uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc Alloy Self Aligning Pillow Block F...
  6. UCP202-10 Pillow Block Bearing 5/8" Bore 2 Bolt Solid Base (2 Pieces)
  7. Jeremywell 2 Pieces UCP205-16, 1 Inch Pillow Block Bearing, Solid Base, Self-Alignment, Brand New
  8. 2 Piece- 1 inch 2 Bolt Pillow Block Flange Bearing, UCFL205-16, Self-Alignment, Brand New
  9. UCP207-20 1-1/4 Bore Pillow Block Bearing Unit Solid Base
  10. 2 Pieces- 1 inch 4 Bolts Pillow Block Flange Bearing,UCF205-16,Self-Alignment, Brand New

  #1

Two (2) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1" Inch Inside Diameter w/Set Screw Lock - P205

Model: UCP205-16   |    Mpn: 2-UCP205-16   |    Ean: 0692128474087   |    PartNumber: 2-UCP205-16   |   Asin: B01LYHPRPO

The UCP205-16 pillow block mounted bearing with a 1" inside diameter, two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has a cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 14 kN and a static (axial) load rating of 7.85 kN. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires two 3/8" bolts (sold separately). This mounted bearing is used in industrial manufacturing, food and beverage manufacturing, and in the textile industry. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Features

  • This UCP bearing has a self aligning feature. If you receive the bearing and the the internal sleeve appears to be crooked this is not a problem because it is meant to have some play so that it will self align with the shaft.
  • UC205-16 chrome steel bearing for efficient operations at a wide range of speeds
  • Dynamic (radial) load rating of 14 kN and static (axial) load rating of 7.85 kN
  • Set screw prevents shaft slippage
  • 1 inside diameter fits conventional cylindrical shafts
  • See more on Amazon...

Brand: BC Precision   |   Manufacturer: BC Precision

Item Dimensions: 12 x 4 x 9 inches (30.5 x 10.2 x 22.9 cm)   |   Package Dimensions: 3.9 x 5.6 x 8.7 inches (9.9 x 14.2 x 22.1 cm)

Amazon Price: $17.95 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.95 | Used Price: $15.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Two (2) UCP204-12 Cast Iron Pillow Block Mounted Bearings - 3/4" Inch Inside Diameter w/ Set Screw Lock - P204

Model: UCP204-12   |    Mpn: 2-UCP204-12   |    Ean: 0692128474117   |    PartNumber: 2-UCP204-12   |   Asin: B01LXU87L9

The UCP204-12 pillow block mounted bearing with a 3/4" inside diameter, two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has a cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. The bearing has a dynamic (radial) load rating of 12.8 kN and a static (axial) load rating of 6.65 kN. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. The bearing is secured to the shaft with set screws to prevent slippage and the housing requires two 3/8" bolts (sold separately). This mounted bearing is used in industrial manufacturing, food and beverage manufacturing, and in the textile industry. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Features

  • This UCP bearing has a self aligning feature. If you receive the bearing and the the internal sleeve appears to be crooked this is not a problem because it is meant to have some play so that it will self align with the shaft.
  • UC204-12 chrome steel bearing for efficient operations at a wide range of speeds
  • Dynamic (radial) load rating of 12.8 kN and static (axial) load rating of 6.65 kN
  • Set screw prevents shaft slippage
  • 3/4 inside diameter fits conventional cylindrical shafts
  • See more on Amazon...

Brand: BC Precision   |   Manufacturer: BC Precision

Package Dimensions: 3.8 x 5.7 x 8.7 inches (9.7 x 14.5 x 22.1 cm)

Amazon Price: $17.25 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.25

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Eowpower 4Pcs 8mm Bore Diameter Ball Mounted Pillow Block Insert Bearing

 Ean: 0611982484988   |    PartNumber: 02-002-001   |   Asin: B01MT1MODX

Bearing Size:
Total Size(Approx):55 X 28 X 13mm / 2.2" x 1.1" X 0.5" (L*W*H)
Hole Inner Diameter:8mm / 0.31"
Outside Diameter: 21mm / 0.83"

Mounting Hole Diameter:5mm / 0.2"
Holes Centre Distance:44mm / 1.7"

Features

Brand: Eowpower   |   Manufacturer: Eowpower

Package Dimensions: 0.5 x 3.4 x 4.8 inches (1.3 x 8.6 x 12.2 cm)

Amazon Price: $8.69 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

2 Pieces- UCP204-12, 3/4 inch Pillow Block Bearing Solid Base,Self-Alignment, Brand New

 PartNumber: PB-UCP204-12-2PCS   |   Asin: B01IWGLAM0

UCP204-12 Pillow Block Bearing 3/4" Bore 2 Bolt Solid Base (2PCS)

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

Bore Size: 3/4 Inch

Static Load Rating: 6.65 kN/1500 lbs

Dynamic Load Rating: 12.8 kN/2900 lbs

Material: Cast Iron

Max RPM: 4000

Quantity Per Order: 2 Pieces

Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.

Style: 2 Bolts

Product Description: The UCP pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • Commonly used for HVAC, Coveying, Processing, Feed Mill, Agricultural and MANY other industrial applications
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Package Dimensions: 3.19 x 3.62 x 5.39 inches (8.1 x 9.2 x 13.7 cm)

Amazon Price: $17.28 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc Alloy Self Aligning Pillow Block Flange Bearing, Zinc (Pack of 4)

Model: a17053100ux0131   |    Mpn: a17053100ux0131   |    PartNumber: a17053100ux0131   |   Asin: B073L2SQMZ

1.8mm Bore Diameter KFL08 Pillow Block Bearing Rhombic Flange. 2.Zinc Alloy Rhombic Flanged Base, rust-proof, durable, have long Life. 3.This Bearing is a self-aligning, pillow block bearing, you can adjust or replace the bearing easily. 4.Pillow Block Bearing Flange Block Bearing is widely used in various of machinery, especially in food machine. 5.They also can be used into machinery, convey ring systems, film processing machinery, spin machine, printing machinery. Specifications Product Name: Pillow Block Bearing Package Content: 4pcs x Pillow Block Bearing Material: Zinc Alloy, Bearing Steel Color: Gray Weight: 112g Model: KFL08 Overall Size: 48(+/-2) x 27(+/-2) x 12(+/-2)mm/1.9-inch x 1.06-inch x 0.47-inch(L*W*H) Bearing Inner Dia.: 8mm/0.31-inch Mounting Hole Diameter: 5mm/0.2-inch Mounting Hole Distance: 37mm/1.46-inch.

Features

  • SIZE:KFL08 8mm Bore Diameter, Pillow Block Bearing Rhombic Flange
  • FEATURES: This Bearing is a self-aligning, pillow block bearing
  • MATERIAL: Zinc Alloy Rhombic Flanged Base, rust-proof, durable, have long Life
  • APPLICATION: Pillow Block Bearing Flange Block Bearing is widely used in various of machinery
  • NOTE: Can be used into convey ring systems, film processing machinery
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Item Dimensions: 0.79 x 3.94 x 5.51 inches (2.0 x 10.0 x 14.0 cm)   |   Package Dimensions: 1.5 x 3.82 x 5.2 inches (3.8 x 9.7 x 13.2 cm)

First Available: 2018-08-07

Amazon Price: $9.98 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.95 | Used Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

UCP202-10 Pillow Block Bearing 5/8" Bore 2 Bolt Solid Base (2 Pieces)

 PartNumber: PB-UCP202-10-2PCS   |   Asin: B01IWGKNVE

UCP202-10 Pillow Block Bearing 5/8" Bore 2 Bolt Solid Base (2 Pieces)

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

Bore Size: 5/8 Inch

Static Load Rating: 6.65 kN/1500 lbs

Dynamic Load Rating: 12.8 kN/2900 lbs

Material: Cast Iron

Max RPM: 4000

Quantity Per Order: 2 Pieces

Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.

Style: 2 Bolts

Product Description: The UCP pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • Common usage for UCP Pillow Block Bearing include: Agriculture, Construction, Conveyors, Coveying, Feed Mill,Food and Beverage, HVAC, Packaging and General Industrial Equipment
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Amazon Price: $18.58 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Jeremywell 2 Pieces UCP205-16, 1 Inch Pillow Block Bearing, Solid Base, Self-Alignment, Brand New

Model: UCP205-16JW-2   |    Mpn: PB-UCP205-16-2PCS   |    Ean: 0799789046339   |    PartNumber: PB-UCP205-16-2PCS   |   Asin: B01IWGLPF2

UCP205-16 Pillow Block Bearing 1" Bore 2 Bolt Solid Base (2PCS)

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

Bore Size: 1 Inch

Static Load Rating: 7.85 kN/1800 lbs

Dynamic Load Rating: 14 kN/3100 lbs

Material: Cast Iron

Max RPM: 3400

Quantity Per Order: 2 Pieces

Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.

Style: 2 Bolts

Product Description: The UCP pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • Wide Inner Ring Bearing. 100% Satisfaction Guarantee
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Package Dimensions: 3.7 x 5.39 x 8.31 inches (9.4 x 13.7 x 21.1 cm)

Amazon Price: $17.88 | as of 01/17/2019(1:55pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

2 Piece- 1 inch 2 Bolt Pillow Block Flange Bearing, UCFL205-16, Self-Alignment, Brand New

 Ean: 0699973470943   |    PartNumber: PB-UCFL205-16-2PCS   |   Asin: B01IWGK75G

UCFL205-16 Pillow Block Flange Bearing 1" Bore 2 Bolt Solid Base (2PCS)

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

Bore Size: 1 Inch

Static Load Rating: 7.85 kN/1800 lbs

Dynamic Load Rating: 14 kN/3100 lbs

Material: Cast Iron

Max RPM: 3400

Quantity Per Order: 2 Pieces

Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.

Style: 2 Bolts

Product Description: The UCFL pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • Common usage for UCFL 2-Bolt Flange Bearing: Agricultural, Automotive, Construction, Sporting and Consumer Goods, Pump, Manufacturing Equipment, Fan Assemblies, Farm Machinery, Conveyor, Feed Mill, Economical Housed Bearing, and many other Industrial Application
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Amazon Price: $17.28 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $22.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

UCP207-20 1-1/4 Bore Pillow Block Bearing Unit Solid Base

 PartNumber: UCP207-20   |   Asin: B07CVL17M4

1 pc of UCP207-20 1-1/4" ID Pillow Block Bearing with Solid Base Cast Iron Housing. Shaft Height: 1-7/8" Bolt Centers: 5" Total Length: 6-9/16"

Features

  • 1-1-4" Bore
  • Wide Inner Ring Self-Aligning Bearing
  • Standard Duty
  • Regreaseable
  • Set Screw Locking
  • See more on Amazon...

Brand: QBBC   |   Manufacturer: QBBC

Package Dimensions: 1 x 2 x 2 inches (2.5 x 5.1 x 5.1 cm)

Amazon Price: $17.99 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

2 Pieces- 1 inch 4 Bolts Pillow Block Flange Bearing,UCF205-16,Self-Alignment, Brand New

 PartNumber: PB-UCF205-16-2PCS   |   Asin: B01IWGK9NG

UCF205-16 Pillow Block Flange Bearing 1" Bore 4 Bolt Solid Base (2PCS)

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

Bore Size: 1 Inch

Static Load Rating: 7.85 kN/1800 lbs

Dynamic Load Rating: 14 kN/3100 lbs

Material: Cast Iron

Max RPM: 3400

Quantity Per Order: 2 Pieces

Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.

Style: 4 Bolts

Product Description: The UCF pillow block mounted bearing series has four bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • INTERCHANGES AMI: UCF205-16 Browning: VF4S-216 Dodge: F4B-SC-100 Fafnir: RCJC-1 Fafnir: YCJ-1 Link-Belt: F3-U216N NSK: UCF205-16S NTN: UCF205-100T Peer: FHSFJ205-16G RHP: SF-1 Sealmaster: SF-1 SKF: FY-1-TM
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Amazon Price: $17.28 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $22.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

4 Piece UCP201-8, 1/2 inch Pillow Block Bearing Solid Base,Self-Alignment, Brand New

 PartNumber: PB-UCP201-8-4PCS   |   Asin: B01M1C0GP6

UCP201-8 Pillow Block Bearing 1/2" Bore 2 Bolt Solid Base (4PCS)

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

Bore Size: 1/2 Inch

Static Load Rating: 6.65 kN/1500 lbs

Dynamic Load Rating: 12.8 kN/2900 lbs

Material: Cast Iron

Max RPM: 4000

Quantity Per Order: 4 Pieces

Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.

Style: 2 Bolts

Product Description: The UCP pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Amazon Price: $23.58 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $37.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

4 Piece- UCP204-12, 3/4 inch Pillow Block Bearing Solid Base,Self-Alignment, Brand New

 PartNumber: PB-UCP204-12-4PCS   |   Asin: B01M10KGAB

UCP204-12 Pillow Block Bearing 3/4" Bore 2 Bolt Solid Base (4PCS)

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

Bore Size: 3/4 Inch

Static Load Rating: 6.65 kN/1500 lbs

Dynamic Load Rating: 12.8 kN/2900 lbs

Material: Cast Iron

Max RPM: 4000

Quantity Per Order: 4 Pieces

Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.

Style: 2 Bolts

Product Description: The UCP pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • Commonly used for HVAC, Coveying, Processing, Feed Mill, Agricultural and MANY other industrial applications
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Package Dimensions: 3.62 x 5.63 x 7.13 inches (9.2 x 14.3 x 18.1 cm)

Amazon Price: $25.58 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $38.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Jeremywell UCP205-16 Pillow Block Bearing Solid Base, 1", Self-Alignment, 1.5" Width, 2.736" Length, Cast Iron/Chromium Steel (Pack of 4)

Model: UCP205-16   |    Mpn: UCP205-16   |    Ean: 0688938512934   |    PartNumber: UCP205-16   |   Asin: B06XCWJFHC

This Series ball bearing unit is a double sealed bearing with a steel cage, set screws and is pre-housed. The double sealed bearing keeps the lubricant in and contaminants out. The steel cage that evenly spaces the balls for reduced friction, vibration and noise. The set screws enable the inner ring of the bearing to be fixed to the shaft, preventing slippage. This bearing has a solid base with two bolt holes which is easy to install and safe to replace. A mounted unit is essentially a ball bearing with a spherical outer ring (self-alignment to avoid any misalignment), the ability to lock on to the shaft, and is pre-housed. Example of possible applications include: mining, metallurgy, agriculture, chemical engineering and conveying machinery, etc the bearing has set screws that makes the inner ring of the bearing to be fixed to the shaft, preventing slippage. The bearing is sealed on both sides to keep the lubricant in and contaminants out. It has a solid base with 2 bolt holes for easy mounting, installation and safe replacement. Steel cage evenly spaces balls for reduced friction, vibration and noise. Deep groove geometry for high speeds and supporting both radial and axial loads. UCP205-16 pillow block bearing is also known as ami: UCP 205-16 Browning: vps-216 Dodge: p2b-sc-016 Fafnir: rasc-1 Fafnir: yas-1 Link-Belt: p3-u216n Link-Belt: p3-y216n NSK: usp205-16s NTN: ucp205-016t Peer: fhsp205-16g RHP: np-1 seal Master: np-16.

Features

  • 4-Pieces 100 percent premium quality pillow block bearing
  • High quality self aligning set-screw bearing with cast iron pillow block
  • Commonly used for hvac, conveying, processing, feed mill, agricultural and many other industrial applications
  • Bore: 1 inch
  • Wide inner ring bearing. 100 percent satisfaction guarantee
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Package Dimensions: 5.59 x 6.42 x 8.11 inches (14.2 x 16.3 x 20.6 cm)

Amazon Price: $26.58 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $38.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

OctagonStar 2pcs KFL08 8mm Zinc-Aluminum Alloy Flange Pillow Block Bearing

 Ean: 0709586709481   |    PartNumber: KFL08   |   Asin: B01KJWLXNQ

Model : KFL08.
Material : Zinc Alloy.
Color : Gray.
Weight : 53g.
Package Content : 2pcs.

Features

  • Model : KFL08.
  • Material : Zinc Alloy.
  • Color : Gray.
  • Weight : 53g.
  • Package Content : 2pcs.
  • See more on Amazon...

Brand: OctagonStar   |   Manufacturer: OctagonStar

Item Dimensions: 0.51 x 1.02 x 1.97 inches (1.3 x 2.6 x 5.0 cm)   |   Package Dimensions: 0.4 x 2.4 x 6 inches (1.0 x 6.1 x 15.2 cm)

Amazon Price: $6.62 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

2 Pieces- UCFL204-12 3/4 inch 2 Bolt Pillow Block Flange Bearing, Self-Alignment, Brand New

 PartNumber: PB-UCFL204-12-2PCS   |   Asin: B01IWGP8PU

UCFL204-12 Pillow Block Flange Bearing 3/4" Bore 2 Bolt Solid Base (2PCS)

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

Bore Size: 3/4 Inch

Static Load Rating: 6.65 kN/1500 lbs

Dynamic Load Rating: 12.8 kN/2900 lbs

Material: Cast Iron

Max RPM: 4000

Quantity Per Order: 2 Pieces

Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.

Style: 2 Bolts

Product Description: The UCFL pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • Dimensions: Item: UCFL204-12 Bearing Type: Mounted Bearings Bolt Size: M10 Basic Load (Cr): 12.8 KN Basic Load (Cor): 6.65 KN Bearing No: UC204-12 Bore: 3/4 Bolt hole to bolt hole: 3.543 in. (90mm) Overall length: 4.448 in. (113mm) Overall thickness: 1.312 in. (33.12mm) Bolt hole: 452 in. (11.5mm) Temp. Range: -40 Degrees to 250 Degrees F
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Amazon Price: $16.58 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $22.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Atoplee Bore Diameter Ball Bearing Pillow Block [2pcs 12mm]

 Ean: 0737382802617   |    PartNumber: 43237-2   |   Asin: B00R2MYN98

Specifications:

Inside diameter:12mm
The 2 fixing hole spacing:55mm
Fixed hole diameter:6.6mm
Material: zinc alloy
Net Weight:82g/piece

Package Included:

2pcs 12mm Bore Diameter Ball Bearing Pillow Block

Features

  • Two-bolt housing with ball bearing insert for ready-to-mount installation.
  • Setscrew locking collar for secure attachment to guided shaft.
  • Between the inner bearing and outer fixing ring angle can fine tune.
  • Easy to install.
  • See more on Amazon...

Brand: ATOPLEE   |   Manufacturer: ATOPLEE

Package Dimensions: 0.5 x 3.7 x 7 inches (1.3 x 9.4 x 17.8 cm)

Amazon Price: $8.50 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

1 Piece- UCF205-16, 1 inch 4 Bolts Pillow Block Flange Bearing, Self-Alignment, Brand New!

 PartNumber: PB-UCF205-16-1PC   |   Asin: B01IWE2WME

1 PIECE- UCF205-16, 1 inch 4 Bolts Pillow Block Flange Bearing, Self-Alignment, Brand New!

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

Bore Size: 1 Inch

Static Load Rating: 7.85 kN/1800 lbs

Dynamic Load Rating: 14 kN/3100 lbs

Material: Cast Iron

Max RPM: 3400

Quantity Per Order: 1 Piece

Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.

Style: 4 Bolts

Product Description: The UCF pillow block mounted bearing series has four bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Package Dimensions: 1.8 x 4.1 x 4.5 inches (4.6 x 10.4 x 11.4 cm)

Amazon Price: $11.77 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $17.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Sydien 12mm/0.47" Diameter Ball Mounted Pillow Block Insert Bearing 4 Pcs (12mm)

 Ean: 0604213499448   |    PartNumber: 43237-2   |   Asin: B07C5NPXMZ

Pillow Block Bearing Flange Block Bearing is widely used in various of machinery, especially in food machine.
They also can be used into conveyering systems, film processing machinery, spin machine, printing machiner.

Features

  • Setscrew locking collar for secure attachment to guided shaft.
  • Two-bolt housing with ball bearing insert for ready-to-mount installation.
  • This Bearing is a self-aligning, pillow block bearing, you can adjust or replace the bearing easily.
  • Pillow Block Flange Bearing is widely used in various of machinery, such as machinery and equipment, conveyors, machine manufacturing, ect.
  • Overall Size:70 x 16x38mm /2.76x 0.63x 1.5(L*W*H);Mounting Hole Diameter: 12mm/0.47.
  • See more on Amazon...

Brand: Sydien   |   Manufacturer: Shenzhenshi saidien dianzishangwuyouxiangongsi

Package Dimensions: 1.1 x 4.37 x 5.31 inches (2.8 x 11.1 x 13.5 cm)

Amazon Price: $11.99 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

4x (SCS8UU 8mm) Linear Ball Bearing Pillow Block Linear Slides Unit for CNC US Shipping

 Ean: 0190459112468   |    PartNumber: CH8T144917AQZIX399   |   Asin: B075212JGJ

Product name:Sliding Block Model: SCS8UU Inner diameter:8mm/0.31" Overall Size:30mmx34mmx22mm(L*W*H)/1.18"x1.34"x0.87" Material:Metal,Rubber Package content:4pcs slide bushing Linearbearingslidebushingiswidelyusedinprintingmachinery,electronic equipment,foodmachinery,packagingmachinery,medicalmachinery,textilemachinery, equipment,robots,tools,machinery,machinetools,automotive,andotherprecisionequipmentorspecialmachineryindustry. Package Including 4

Features

  • Product name Linear motion ball bearing slide bushing
  • Model: SCS8UU;Inner diameter:8mm/0.31
  • Overall Size:30mmx34mmx22mm(L*W*H)/1.18x1.34x0.87
  • Material:Metal,Rubber; Package content:4pcs slide bushing
  • Linear bearing is widely applied to electronic equipment
  • See more on Amazon...

Brand: Guwanji   |   Manufacturer: Guwanji

Item Dimensions: 1.73 x 1.34 x 2.36 inches (4.4 x 3.4 x 6.0 cm)   |   Package Dimensions: 1.57 x 6.3 x 7.09 inches (4.0 x 16.0 x 18.0 cm)

Amazon Price: $6.09 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

2 Piece UCP201-8, 1/2 inch Pillow Block Bearing Solid Base,Self-Alignment, Brand New

 PartNumber: PB-UCP201-8-2PCS   |   Asin: B01IWGKKGW

UCP201-8 Pillow Block Bearing 1/2" Bore 2 Bolt Solid Base (2PCS)

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

Bore Size: 1/2 Inch

Static Load Rating: 6.65 kN/1500 lbs

Dynamic Load Rating: 12.8 kN/2900 lbs

Material: Cast Iron

Max RPM: 4000

Quantity Per Order: 2 Pieces

Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.

Style: 2 Bolts

Product Description: The UCP pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Amazon Price: $17.28 | as of 01/17/2019(1:55pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $22.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Two (2) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1" Inch Inside Diameter w/Set Screw Lock...
  2. Two (2) UCP204-12 Cast Iron Pillow Block Mounted Bearings - 3/4" Inch Inside Diameter w/ Set Screw L...
  3. Eowpower 4Pcs 8mm Bore Diameter Ball Mounted Pillow Block Insert Bearing
  4. 2 Pieces- UCP204-12, 3/4 inch Pillow Block Bearing Solid Base,Self-Alignment, Brand New
  5. Uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc Alloy Self Aligning Pillow Block F...
  6. UCP202-10 Pillow Block Bearing 5/8" Bore 2 Bolt Solid Base (2 Pieces)
  7. Jeremywell 2 Pieces UCP205-16, 1 Inch Pillow Block Bearing, Solid Base, Self-Alignment, Brand New
  8. 2 Piece- 1 inch 2 Bolt Pillow Block Flange Bearing, UCFL205-16, Self-Alignment, Brand New
  9. UCP207-20 1-1/4 Bore Pillow Block Bearing Unit Solid Base
  10. 2 Pieces- 1 inch 4 Bolts Pillow Block Flange Bearing,UCF205-16,Self-Alignment, Brand New

Most Wished For

  1. Two (2) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1" Inch Inside Diameter w/Set Screw Lock...
  2. Two (2) UCP204-12 Cast Iron Pillow Block Mounted Bearings - 3/4" Inch Inside Diameter w/ Set Screw L...
  3. Eowpower 4Pcs 8mm Bore Diameter Ball Mounted Pillow Block Insert Bearing
  4. 2 Pieces- UCP204-12, 3/4 inch Pillow Block Bearing Solid Base,Self-Alignment, Brand New
  5. Uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc Alloy Self Aligning Pillow Block F...
  6. UCP202-10 Pillow Block Bearing 5/8" Bore 2 Bolt Solid Base (2 Pieces)
  7. Jeremywell 2 Pieces UCP205-16, 1 Inch Pillow Block Bearing, Solid Base, Self-Alignment, Brand New
  8. 2 Piece- 1 inch 2 Bolt Pillow Block Flange Bearing, UCFL205-16, Self-Alignment, Brand New
  9. UCP207-20 1-1/4 Bore Pillow Block Bearing Unit Solid Base
  10. 2 Pieces- 1 inch 4 Bolts Pillow Block Flange Bearing,UCF205-16,Self-Alignment, Brand New

Most Gifted

  1. Two (2) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1" Inch Inside Diameter w/Set Screw Lock...
  2. Two (2) UCP204-12 Cast Iron Pillow Block Mounted Bearings - 3/4" Inch Inside Diameter w/ Set Screw L...
  3. Eowpower 4Pcs 8mm Bore Diameter Ball Mounted Pillow Block Insert Bearing
  4. 2 Pieces- UCP204-12, 3/4 inch Pillow Block Bearing Solid Base,Self-Alignment, Brand New
  5. Uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc Alloy Self Aligning Pillow Block F...
  6. UCP202-10 Pillow Block Bearing 5/8" Bore 2 Bolt Solid Base (2 Pieces)
  7. Jeremywell 2 Pieces UCP205-16, 1 Inch Pillow Block Bearing, Solid Base, Self-Alignment, Brand New
  8. 2 Piece- 1 inch 2 Bolt Pillow Block Flange Bearing, UCFL205-16, Self-Alignment, Brand New
  9. UCP207-20 1-1/4 Bore Pillow Block Bearing Unit Solid Base
  10. 2 Pieces- 1 inch 4 Bolts Pillow Block Flange Bearing,UCF205-16,Self-Alignment, Brand New

Top Selling

  1. Two (2) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1" Inch Inside Diameter w/Set Screw Lock...
  2. Two (2) UCP204-12 Cast Iron Pillow Block Mounted Bearings - 3/4" Inch Inside Diameter w/ Set Screw L...
  3. Eowpower 4Pcs 8mm Bore Diameter Ball Mounted Pillow Block Insert Bearing
  4. 2 Pieces- UCP204-12, 3/4 inch Pillow Block Bearing Solid Base,Self-Alignment, Brand New
  5. Uxcell a17053100ux0131 Uxcell a17053100ux0131 4pcs KFL08 8mm Zinc Alloy Self Aligning Pillow Block F...
  6. UCP202-10 Pillow Block Bearing 5/8" Bore 2 Bolt Solid Base (2 Pieces)
  7. Jeremywell 2 Pieces UCP205-16, 1 Inch Pillow Block Bearing, Solid Base, Self-Alignment, Brand New
  8. 2 Piece- 1 inch 2 Bolt Pillow Block Flange Bearing, UCFL205-16, Self-Alignment, Brand New
  9. UCP207-20 1-1/4 Bore Pillow Block Bearing Unit Solid Base
  10. 2 Pieces- 1 inch 4 Bolts Pillow Block Flange Bearing,UCF205-16,Self-Alignment, Brand New



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical