Frontpage > Industrial > Power Transmission > Quick Disconnect Bushings

Best Quick Disconnect Bushings - Buying Guide

Last Updated: 11/14/2018

Share on


  #1

Arlington SB130 Metal Stud Bushings, 100-Pack

Model: SB130-100   |    Mpn: SB130-100   |    Ean: 0018997401328   |    PartNumber: SB130-100   |   Asin: B0069KOTP2

Arlington SB130-100 Metal Stud Bushings, 100 pack. Arlington's patented non-metallic bushings fit existing irregular shaped holes in metal studs, alleviating the need to punch holes in metal studs, weakening the structural member. To install these bushings in an irregular shaped hole, pass one end of the joined connector through the hole in the stud Snap the bushing and the washer ends together. There's no need to separate the two halves If a punched hole is required, the SB13 can be installed in a standard 1 Inch trade size, round punched hole (1-3/8 Inch diameter) Snap the bushing end into the hole. Use these bushings to comply with paragraph 300-4(b) (1) of the 2005 NEC code which states that: In both exposed and concealed locations where nonmetallic-sheathed cables pass through either factory or filed punched, cut, or drilled slots or holes in metal members, the cable shall be protected by bushings or grommets covering all metal edges and securely fastened in the opening prior to installation of the cable Inch

Features

  • Arlington's bushings fit existing irregular shaped holes in metal studs
  • Comply with NEC code
  • Snap bushing and washer end together
  • Red in color, 100-Pack
  • UL approved
  • See more on Amazon...

Brand: Arlington Industries   |   Manufacturer: Arlington Industries. Inc

Item Dimensions: 2.5 x 1.3 x 5.75 inches (6.4 x 3.3 x 14.6 cm)   |   Package Dimensions: 7.7 x 8.7 x 11.3 inches (19.6 x 22.1 x 28.7 cm)

Amazon Price: $35.94 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $39.99

Warranty: In the event any of our products are found to be defective, we will replace them with new product free of charge. The time limit for this warranty is one year following the date of sale or one year after the date of installation, whichever is the earlier date. This warranty does not apply when the product is used for any purpose other than the intended use as described in the Arlington literature. This warranty does not apply when the product is used for any installation which would violate the national electrical code or any code which takes precedence in a particular jurisdiction. Labor is not included.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Gates SK.3/4 QD SK Bushing, 3/4" Bore

 Ean: 0072053094725   |    PartNumber: SK.3/4   |   Asin: B00CJHBXIK

This Gates QD bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation and have inch dimensions. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Quick disconnect (QD) sheaves, sprockets, and pulleys (not included) are available in a variety of outside diameters to fit this QD bushing, allowing the precise selection of the number of drive teeth or grooves. This bushing is suitable for use in a wide range of mechanical and electronic adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO.

What's in the Box? QD bushing Mounting hardware

Features

  • For use with same-type QD sheaves, sprockets and pulleys (not included)
  • Carbon steel for strength and resistance to wear
  • Allows precise selection of number of drive teeth or grooves in adjustable speed applications
  • Mounting hardware included
  • Inch sizes
  • See more on Amazon...

Brand: Gates   |   Manufacturer: Gates

Package Dimensions: 2 x 4.3 x 4.5 inches (5.1 x 10.9 x 11.4 cm)

First Available: 2017-05-15

Amazon Price: $43.06 | as of 11/14/2018(9:57pm pst)
Availibility:
List Price: $38.17

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Genova Products 30227 PVC Sch. 40 Reducing Bushings, 2" x 3/4"

Model: 30227   |    Mpn: 30227   |    Ean: 0038561006056   |    PartNumber: 30227   |   Asin: B00COUNKLU

Geneva Products 30227 2" X 3/4" PVC Sch. 40 Reducing Bushings Reducing bushing inserts into fitting hub to reduce to smaller pipe size Spigot x Slip 2" x 3/4". This Product is manufactured in United States.

Features

  • Geneva Products 30227 2" X 3/4" PVC Sch. 40 Reducing Bushings
  • Reducing bushing inserts into fitting hub to reduce to smaller pipe size
  • This Product is manufactured in United States
  • See more on Amazon...

Brand: Genova   |   Manufacturer: Genova Products Inc

Item Dimensions: 2.5 x 1.75 x 2.5 inches (6.4 x 4.4 x 6.4 cm)   |   Package Dimensions: 1.75 x 2.4 x 2.4 inches (4.4 x 6.1 x 6.1 cm)

Amazon Price: $4.01 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

TB Woods Type QT QT78 Sure-Grip Bushing, Inch, 0.875" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

 Ean: 0698672190268   |    PartNumber: QT78   |   Asin: B004LDK6DI

This TB Woods Type QT Sure-Grip quick disconnect bushing with a torque capacity of 1,750 in-lbs is made of and is used for mounting a quick disconnect pulley, sheave, or sprocket on a drive shaft. It is split through the flange and taper to provide strong clamping on the shaft. The bushing is made of steel for greater strength and shock resistance than cast iron. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with quick disconnect bushings from various manufacturers. This quick disconnect bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

TB Wood's manufactures bushings, pulleys, couplings, and electronic motor controls. The company, founded in 1857 and headquartered in Chambersburg, PA, meets International Organization for Standardization (ISO) standard 9001:2008.

Features

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
  • Split through flange and taper to provide strong clamping on the shaft
  • Steel for greater strength and shock resistance than cast iron
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with quick disconnect bushings from various manufacturers
  • See more on Amazon...

Brand: TB Woods   |   Manufacturer: TB Woods

Package Dimensions: 1.4 x 2.8 x 2.8 inches (3.6 x 7.1 x 7.1 cm)

Amazon Price: $8.70 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $8.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

TB Woods Type QT QT114 Sure-Grip Bushing, Inch, 1.25" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

 Ean: 0698672190329   |    PartNumber: QT114   |   Asin: B004LDK5UW

This TB Woods Type QT Sure-Grip quick disconnect bushing with a torque capacity of 1,750 in-lbs is made of and is used for mounting a quick disconnect pulley, sheave, or sprocket on a drive shaft. It is split through the flange and taper to provide strong clamping on the shaft. The bushing is made of steel for greater strength and shock resistance than cast iron. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with quick disconnect bushings from various manufacturers. This quick disconnect bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

TB Wood's manufactures bushings, pulleys, couplings, and electronic motor controls. The company, founded in 1857 and headquartered in Chambersburg, PA, meets International Organization for Standardization (ISO) standard 9001:2008.

Features

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
  • Split through flange and taper to provide strong clamping on the shaft
  • Steel for greater strength and shock resistance than cast iron
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with quick disconnect bushings from various manufacturers
  • See more on Amazon...

Brand: TB Woods   |   Manufacturer: TB Woods

Item Dimensions: 1.3 x 3 x 3.1 inches (3.3 x 7.6 x 7.9 cm)   |   Package Dimensions: 1.1 x 2.7 x 2.7 inches (2.8 x 6.9 x 6.9 cm)

Amazon Price: $8.70 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $20.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Morris Products 21700 EMT Insulating Bushing, 1/2" Trade Size (Pack of 100)

Model: 21700   |    Mpn: 21700   |    Ean: 0601986217002   |    PartNumber: 21700   |   Asin: B005GDG4YW

Examples: Power, Cable TV, computer datalines, telephone/modem, audio/visual cables, alarm and security systems. Meets NEC Article 300-15C requirements. EMT insulating bushings are listed for use in environmental air handling spaces per 2005 NEC code requirements 300-22C. Polyethylene rated at 194 F(90 C).

Features

  • Electrical EMT Insulating Bushings - EMT Insulating Bushing protect wires and cables.
  • EMT Insulating Bushings protect cables from abrasion
  • Fast & Easy press-on installation
  • Holds tight as cables are pulled
  • Less expensive alternative to costly fittings when used just for wire
  • See more on Amazon...

Brand: Morris Products   |   Manufacturer: Morris Products

Item Dimensions: 0.5 x 0.5 x 0 inches (1.3 x 1.3 x 0.0 cm)   |   Package Dimensions: 1.1 x 6.1 x 10.5 inches (2.8 x 15.5 x 26.7 cm)

Amazon Price: $12.63 | as of 11/14/2018(9:57pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Browning SDS 1 Q-D Bushing 1 Bore 1/4 x 1/8 Keyway"

 Ean: 0662289334889   |    PartNumber: SDS 1   |   Asin: B003RMAVFW

SDS 1 Q-D Bushing 1 Bore 1/4 x 1/8 Keyway"

Features

  • Reverse mounting possible
  • Single split barrel
  • 3/4 per ft taper on barrel
  • Bore range 1/2 to 7
  • See more on Amazon...

Brand: Browning   |   Manufacturer: Regal

Package Dimensions: 1.6 x 4.7 x 4.8 inches (4.1 x 11.9 x 12.2 cm)

Amazon Price: $26.37 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $28.33

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Browning SH 1/2 Q-D Bushing 1/2 Bore 1/8 x 1/16 Keyway"

 Ean: 0662289365449   |    PartNumber: SH 1/2   |   Asin: B003RM7Q4Q

SH 1/2 Q-D Bushing 1/2 Bore 1/8 x 1/16 Keyway"

Features

  • Reverse mounting possible
  • Single split barrel
  • 3/4 per ft taper on barrel
  • Bore range 1/2 to 7
  • See more on Amazon...

Brand: Browning   |   Manufacturer: Regal

Package Dimensions: 1.5 x 3.8 x 4 inches (3.8 x 9.7 x 10.2 cm)

Amazon Price: $27.47 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $27.47

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

TB Woods Type SH SH1 Sure-Grip Bushing, Cast Iron, Inch, 1" Bore, 1.871" OD, 1.25" Length, 3500 lbs/in Torque, Standard Design, Standard Keyway

 Ean: 0698672700245   |    PartNumber: SH1   |   Asin: B004LDK3L8

This TB Woods Type SH Sure-Grip quick disconnect bushing with a torque capacity of 3,500 in-lbs is made of cast iron and is used for mounting a quick disconnect pulley, sheave, or sprocket on a drive shaft. It is split through the flange and taper to provide strong clamping on the shaft. The bushing is made of cast iron for resistance to wear, galling, and corrosion. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it has a set screw over the keyway to help keep the key in place on vertical shafts and with vibrating loads. This quick disconnect bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

TB Wood's manufactures bushings, pulleys, couplings, and electronic motor controls. The company, founded in 1857 and headquartered in Chambersburg, PA, meets International Organization for Standardization (ISO) standard 9001:2008.

Features

  • Quick disconnect bushing with a torque capacity of 3,500 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
  • Split through flange and taper to provide strong clamping on the shaft
  • Cast iron for resistance to wear, galling, and corrosion
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads
  • See more on Amazon...

Brand: TB Woods   |   Manufacturer: TB Woods

Package Dimensions: 1.5 x 3 x 3.2 inches (3.8 x 7.6 x 8.1 cm)

Amazon Price: $15.46 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $32.56

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Morris Products 21705 EMT Insulating Bushing, 2" Trade Size (Pack of 20)

Model: 21705   |    Mpn: 21705   |    Ean: 0601986217057   |    PartNumber: 21705   |   Asin: B005GDG5E6

Examples: Power, Cable TV, computer datalines, telephone/modem, audio/visual cables, alarm and security systems. Meets NEC Article 300-15C requirements. EMT insulating bushings are listed for use in environmental air handling spaces per 2005 NEC code requirements 300-22C. Polyethylene rated at 194 F(90 C).

Features

  • Electrical EMT Insulating Bushings - EMT Insulating Bushing protect wires and cables.
  • EMT Insulating Bushings protect cables from abrasion
  • Fast & Easy press-on installation
  • Holds tight as cables are pulled
  • Less expensive alternative to costly fittings when used just for wire
  • See more on Amazon...

Brand: Morris Products   |   Manufacturer: Morris Products

Package Dimensions: 3.1 x 4.6 x 6.6 inches (7.9 x 11.7 x 16.8 cm)

Amazon Price: $4.45 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

TB Woods Type SH SH58 Sure-Grip Bushing, Cast Iron, Inch, 0.625" Bore, 1.871" OD, 1.25" Length, 3500 lbs/in Torque, Standard Design, Standard Keyway

 Ean: 0698672700184   |    PartNumber: SH58   |   Asin: B004LDK476

' Quick Detachable Bushing, Bore Bushing Series SH, Bore Dia. 5/8 In., Bolt Size 1/4-20x1-3/8 In., Length 1.25 In., 3/4 In Per Foot On Diameter Taper, Steel, Iron Material, SAE Grade 5, Includes Cap Screws '

Features

  • Quick disconnect bushing with a torque capacity of 3,500 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
  • Split through flange and taper to provide strong clamping on the shaft
  • Cast iron for resistance to wear, galling, and corrosion
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads
  • See more on Amazon...

Brand: TB Woods   |   Manufacturer: TB Woods

Item Dimensions: 3.2 x 1.5 x 3 inches (8.1 x 3.8 x 7.6 cm)   |   Package Dimensions: 1.5 x 3.1 x 3.2 inches (3.8 x 7.9 x 8.1 cm)

Amazon Price: $12.94 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.94

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Morris Products 21732 Plastic Insulating Bushing, 1/2" Size (Pack of 100)

Model: 21732   |    Mpn: 21732   |    Ean: 0601986217323   |    PartNumber: 21732   |   Asin: B005GDG6LI

1/2 wide. Threaded plastic inserts are UL/CSA Listed. Dimension Measurements = Inches. UL/CSA Listed.

Features

  • Electrical Bushings Plastic Insulating Bushings - Flame retardant Threaded Plastic Inserts for conduit.
  • Use to Protect Conductors in Rigid or IMC Conduit from Abrasion/Damage during Pull
  • Thermoplastic material-heat, impact and torque resistance
  • Strong reinforcing ribs & rim around bottom
  • Flame retardant Polypropylene (Rated to 221 F, 105 C)
  • See more on Amazon...

Brand: Morris Products   |   Manufacturer: Morris Products

Package Dimensions: 1.9 x 4.1 x 6.7 inches (4.8 x 10.4 x 17.0 cm)

Amazon Price: $11.87 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $16.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Morris Products 21701 EMT Insulating Bushing, 3/4" Trade Size (Pack of 50)

Model: 21701   |    Mpn: 21701   |    Ean: 0601986217019   |    PartNumber: 21701   |   Asin: B00N24NBOI

Examples: Power, Cable TV, computer datalines, telephone/modem, audio/visual cables, alarm and security systems. Meets NEC Article 300-15C requirements. EMT insulating bushings are listed for use in environmental air handling spaces per 2005 NEC code requirements 300-22C. Polyethylene rated at 194 F(90 C).

Features

  • Electrical EMT Insulating Bushings - EMT Insulating Bushing protect wires and cables.
  • EMT Insulating Bushings protect cables from abrasion
  • Fast & Easy press-on installation
  • Holds tight as cables are pulled
  • Less expensive alternative to costly fittings when used just for wire
  • See more on Amazon...

Brand: Morris   |   Manufacturer: Morris Product

Item Dimensions: 0.75 x 0.75 x 0 inches (1.9 x 1.9 x 0.0 cm)   |   Package Dimensions: 1.4 x 6.5 x 11 inches (3.6 x 16.5 x 27.9 cm)

Amazon Price: $9.34 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $14.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

TB Woods Type QT QT13/16 Sure-Grip Bushing, Inch, 0.813" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Torque, Standard Design, Standard Keyway

 Ean: 0698672190251   |    PartNumber: QT13/16   |   Asin: B004LDK5XO

This TB Woods Type QT Sure-Grip quick disconnect bushing with a torque capacity of 1,750 in-lbs is made of and is used for mounting a quick disconnect pulley, sheave, or sprocket on a drive shaft. It is split through the flange and taper to provide strong clamping on the shaft. The bushing is made of steel for greater strength and shock resistance than cast iron. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with quick disconnect bushings from various manufacturers. This quick disconnect bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

TB Wood's manufactures bushings, pulleys, couplings, and electronic motor controls. The company, founded in 1857 and headquartered in Chambersburg, PA, meets International Organization for Standardization (ISO) standard 9001:2008.

Features

  • Quick disconnect bushing with a torque capacity of 1,750 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
  • Split through flange and taper to provide strong clamping on the shaft
  • Steel for greater strength and shock resistance than cast iron
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with quick disconnect bushings from various manufacturers
  • See more on Amazon...

Brand: TB Woods   |   Manufacturer: TB Woods

Package Dimensions: 6 x 6 x 6 inches (15.2 x 15.2 x 15.2 cm)

Amazon Price: $23.18 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 6-10 business days
List Price: $23.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

TB Woods Type SDS SDS118 Sure-Grip Bushing, Cast Iron, Inch, 1.125" Bore, 2.1875" OD, 1.31" Length, 5000 lbs/in Torque, Standard Design, Standard Keyway

 Ean: 0698672700504   |    PartNumber: SDS118   |   Asin: B004LDK2RI

This TB Woods Type SDS Sure-Grip quick disconnect bushing with a torque capacity of 5,000 in-lbs is made of cast iron and is used for mounting a quick disconnect pulley, sheave, or sprocket on a drive shaft. It is split through the flange and taper to provide strong clamping on the shaft. The bushing is made of cast iron for resistance to wear, galling, and corrosion. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it has a set screw over the keyway to help keep the key in place on vertical shafts and with vibrating loads. This quick disconnect bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

TB Wood's manufactures bushings, pulleys, couplings, and electronic motor controls. The company, founded in 1857 and headquartered in Chambersburg, PA, meets International Organization for Standardization (ISO) standard 9001:2008.

Features

  • Quick disconnect bushing with a torque capacity of 5,000 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
  • Split through flange and taper to provide strong clamping on the shaft
  • Cast iron for resistance to wear, galling, and corrosion
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads
  • See more on Amazon...

Brand: TB Woods   |   Manufacturer: TB Woods

Item Dimensions: 1.4 x 4.1 x 4.1 inches (3.6 x 10.4 x 10.4 cm)   |   Package Dimensions: 1.5 x 3.7 x 3.8 inches (3.8 x 9.4 x 9.7 cm)

First Available: 2017-05-15

Amazon Price: $14.00 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $18.15

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Morris 22364 Snap Bushings, 1/2-Inch, Black, (Pack of 10)

Model: 22364   |    Mpn: 22364   |    Ean: 0601986223645   |    PartNumber: 22364   |   Asin: B00ODYP5VS

1/8 maximum Steel thickness. Snap bushings are made from UL approved Nylon 6/6, 94V-2Protect Wires, Tubing, etc. from sharp/uneven drilled & punched metal holes with smooth plastic chassis. 1/8 maximum steel thickness. Finger tip pressure snap-locks the open/closed snap bushing into the mounting hole. Can be applied where cables are already installed. Open/closed snap bushings can accommodate cables too large to fit through the inside diameter of a standard bushing. Made from UL approved Nylon 6/6, 94V-2. UL Recognized.

Features

  • Electrical Snap Bushings (Open/Closed) - Open/Closed Snap Bushings keep wires intact.
  • Flexible shutters to accommodate a variety of cable & hose sizes from a minimum of 1/8 to a maximum as shown in the table
  • Snap bushings with shutters absorb vibration & cushion cables, tubes, etc.
  • Fingertip pressure snap-locks the bushing into the mounting hole
  • Universal design to hold various cable ranges
  • See more on Amazon...

Brand: Morris   |   Manufacturer: Morris Products

Item Dimensions: 12 x 6 x 4 inches (30.5 x 15.2 x 10.2 cm)   |   Package Dimensions: 0.5 x 4 x 4 inches (1.3 x 10.2 x 10.2 cm)

First Available: 2017-12-12

Amazon Price: $5.17 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.75

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Dodge (Baldor) SH 1-120353 Quick Disconnect Bushing - SH Bushing, 1" Bore, Finished w/Keyway, 1/4 x 1/8 in Keyway, Steel

Asin: B07DJ4KLM4

Flanged 4 taper Easy on, easy off Manufactured precisely to industry standards Conventional or reverse mounting Specification: bore diameter: 1" screw torque: 108 in lb flange outside diameter: 2.63 in maximum hub outside diameter: 3 (Steel) in, 4-3/4 (CIass 30 Iron) in flange thickness: 0.38 in barrel diameter: 1.88 in length through bore: 1-1/4 in barrel length: 0.87 in bushing size: SH bolt circle diameter: 2-1/4 in bore type: Finished w/ Keyway number of bolt holes: 3 keyway size: 1/4 x 1/8 in screw thread size: 1/4-20 in material: Steel screw length: 1-3/8 in torque capacity: 3500 in lb manufacturer catalog number: 120353 mounting type: Conventional or Reverse

Features

  • bore diameter: 1"
  • screw torque: 108 in lb
  • flange outside diameter: 2.63 in
  • maximum hub outside diameter: 3 (Steel) in, 4-3/4 (CIass 30 Iron) in
  • flange thickness: 0.38 in
  • See more on Amazon...

Manufacturer: Dodge (Baldor)

Amazon Price: $56.13 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 4-5 business days
List Price: $56.13

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Morris 22370 Snap Bushings, 7/8-Inch, Black, 10-Pack

Model: 22370   |    Mpn: 22370   |    Ean: 0601986223706   |    PartNumber: 22370   |   Asin: B005GDFG64

1/8 maximum Steel thickness. Snap bushings are made from UL approved Nylon 6/6, 94V-2Protect Wires, Tubing, etc. from sharp/uneven drilled & punched metal holes with smooth plastic chassis. 1/8 maximum steel thickness. Finger tip pressure snap-locks the open/closed snap bushing into the mounting hole. Can be applied where cables are already installed. Open/closed snap bushings can accommodate cables too large to fit through the inside diameter of a standard bushing. Made from UL approved Nylon 6/6, 94V-2. UL Recognized.

Features

  • Electrical Snap Bushings (Open/Closed) - Open/Closed Snap Bushings keep wires intact.
  • Flexible shutters to accommodate a variety of cable & hose sizes from a minimum of 1/8 to a maximum as shown in the table
  • Snap bushings with shutters absorb vibration & cushion cables, tubes, etc.
  • Fingertip pressure snap-locks the bushing into the mounting hole
  • Universal design to hold various cable ranges
  • See more on Amazon...

Brand: Morris   |   Manufacturer: Morris Products

Item Dimensions: 12 x 6 x 4 inches (30.5 x 15.2 x 10.2 cm)   |   Package Dimensions: 0.1 x 2.2 x 3.5 inches (0.3 x 5.6 x 8.9 cm)

Amazon Price: $5.39 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.14

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Morris Products 21702 EMT Insulating Bushing, 1" Trade Size ((Pack of 25)

Model: 21702   |    Mpn: 21702   |    Ean: 0601986217026   |    PartNumber: 21702   |   Asin: B005GDG57S

Examples: Power, Cable TV, computer datalines, telephone/modem, audio/visual cables, alarm and security systems. Meets NEC Article 300-15C requirements. EMT insulating bushings are listed for use in environmental air handling spaces per 2005 NEC code requirements 300-22C. Polyethylene rated at 194 F(90 C).

Features

  • Electrical EMT Insulating Bushings - EMT Insulating Bushing protect wires and cables.
  • EMT Insulating Bushings protect cables from abrasion
  • Fast & Easy press-on installation
  • Holds tight as cables are pulled
  • Less expensive alternative to costly fittings when used just for wire
  • See more on Amazon...

Brand: Morris Products   |   Manufacturer: Morris Products

Package Dimensions: 1.9 x 4.8 x 7 inches (4.8 x 12.2 x 17.8 cm)

Amazon Price: $2.32 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 24 hours
List Price: $2.32

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Gates JA.3/4 QD JA Bushing, 3/4" Bore

 Ean: 0072053093919   |    PartNumber: JA.3/4   |   Asin: B00CJH5NUO

This Gates QD bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation and have inch dimensions. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Quick disconnect (QD) sheaves, sprockets, and pulleys (not included) are available in a variety of outside diameters to fit this QD bushing, allowing the precise selection of the number of drive teeth or grooves. This bushing is suitable for use in a wide range of mechanical and electronic adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO.

What's in the Box? QD bushing Mounting hardware

Features

  • For use with same-type QD sheaves, sprockets and pulleys (not included)
  • Carbon steel for strength and resistance to wear
  • Allows precise selection of number of drive teeth or grooves in adjustable speed applications
  • Mounting hardware included
  • Inch sizes
  • See more on Amazon...

Brand: Gates   |   Manufacturer: Gates

Package Dimensions: 1.3 x 2.6 x 2.7 inches (3.3 x 6.6 x 6.9 cm)

First Available: 2017-05-15

Amazon Price: $22.15 | as of 11/14/2018(9:57pm pst)
Availibility: Usually ships in 1 to 2 months
List Price: $22.15

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Arlington SB130 Metal Stud Bushings, 100-Pack
  2. Gates SK.3/4 QD SK Bushing, 3/4" Bore
  3. Genova Products 30227 PVC Sch. 40 Reducing Bushings, 2" x 3/4"
  4. TB Woods Type QT QT78 Sure-Grip Bushing, Inch, 0.875" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Tor...
  5. TB Woods Type QT QT114 Sure-Grip Bushing, Inch, 1.25" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Tor...
  6. Morris Products 21700 EMT Insulating Bushing, 1/2" Trade Size (Pack of 100)
  7. Browning SDS 1 Q-D Bushing 1 Bore 1/4 x 1/8 Keyway"
  8. Browning SH 1/2 Q-D Bushing 1/2 Bore 1/8 x 1/16 Keyway"
  9. TB Woods Type SH SH1 Sure-Grip Bushing, Cast Iron, Inch, 1" Bore, 1.871" OD, 1.25" Length, 3500 lbs/...
  10. Morris Products 21705 EMT Insulating Bushing, 2" Trade Size (Pack of 20)

Most Wished For

  1. Arlington SB130 Metal Stud Bushings, 100-Pack
  2. Gates SK.3/4 QD SK Bushing, 3/4" Bore
  3. Genova Products 30227 PVC Sch. 40 Reducing Bushings, 2" x 3/4"
  4. TB Woods Type QT QT78 Sure-Grip Bushing, Inch, 0.875" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Tor...
  5. TB Woods Type QT QT114 Sure-Grip Bushing, Inch, 1.25" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Tor...
  6. Morris Products 21700 EMT Insulating Bushing, 1/2" Trade Size (Pack of 100)
  7. Browning SDS 1 Q-D Bushing 1 Bore 1/4 x 1/8 Keyway"
  8. Browning SH 1/2 Q-D Bushing 1/2 Bore 1/8 x 1/16 Keyway"
  9. TB Woods Type SH SH1 Sure-Grip Bushing, Cast Iron, Inch, 1" Bore, 1.871" OD, 1.25" Length, 3500 lbs/...
  10. Morris Products 21705 EMT Insulating Bushing, 2" Trade Size (Pack of 20)

Most Gifted

  1. Arlington SB130 Metal Stud Bushings, 100-Pack
  2. Gates SK.3/4 QD SK Bushing, 3/4" Bore
  3. Genova Products 30227 PVC Sch. 40 Reducing Bushings, 2" x 3/4"
  4. TB Woods Type QT QT78 Sure-Grip Bushing, Inch, 0.875" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Tor...
  5. TB Woods Type QT QT114 Sure-Grip Bushing, Inch, 1.25" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Tor...
  6. Morris Products 21700 EMT Insulating Bushing, 1/2" Trade Size (Pack of 100)
  7. Browning SDS 1 Q-D Bushing 1 Bore 1/4 x 1/8 Keyway"
  8. Browning SH 1/2 Q-D Bushing 1/2 Bore 1/8 x 1/16 Keyway"
  9. TB Woods Type SH SH1 Sure-Grip Bushing, Cast Iron, Inch, 1" Bore, 1.871" OD, 1.25" Length, 3500 lbs/...
  10. Morris Products 21705 EMT Insulating Bushing, 2" Trade Size (Pack of 20)

Top Selling

  1. Arlington SB130 Metal Stud Bushings, 100-Pack
  2. Gates SK.3/4 QD SK Bushing, 3/4" Bore
  3. Genova Products 30227 PVC Sch. 40 Reducing Bushings, 2" x 3/4"
  4. TB Woods Type QT QT78 Sure-Grip Bushing, Inch, 0.875" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Tor...
  5. TB Woods Type QT QT114 Sure-Grip Bushing, Inch, 1.25" Bore, 1.625" OD, 1.25" Length, 1750 lbs/in Tor...
  6. Morris Products 21700 EMT Insulating Bushing, 1/2" Trade Size (Pack of 100)
  7. Browning SDS 1 Q-D Bushing 1 Bore 1/4 x 1/8 Keyway"
  8. Browning SH 1/2 Q-D Bushing 1/2 Bore 1/8 x 1/16 Keyway"
  9. TB Woods Type SH SH1 Sure-Grip Bushing, Cast Iron, Inch, 1" Bore, 1.871" OD, 1.25" Length, 3500 lbs/...
  10. Morris Products 21705 EMT Insulating Bushing, 2" Trade Size (Pack of 20)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.