Frontpage > Industrial > Power Transmission > Roller Chain Sprockets

Best Roller Chain Sprockets - Buying Guide

Last Updated: 05/20/2019

Share on

Bestselling Roller Chain Sprockets on Amazon

  1. TRITAN 40BS12H X 3/4 Finished Bore B-Hub Sprocket, 12 Teeth, 1/2" Pitch, 3/4" Finished Bore
  2. Oregon 27958 3/8" Low Profile Pitch 6-Tooth Consumer Spur Sprocket
  3. Tsubaki 40B15F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pit...
  4. 5" Diameter - 4 Step Pulley 1/2" - 5/8" Fixed Bore - Die Cast by Congress
  5. Browning 35A40 Plate Roller Chain Sprocket, Single Strand, Type A Hub, Steel, 5/8" Stocked Bore, 40 Teeth
  6. Tsubaki 40B12F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pit...
  7. 04C 10T 10 Teeth 6mm 7mm 8mm Bore 6.35mm Pitch Motor Steel Metal Chain Sprocket - 6mm (2222x1
  8. TRITAN 35BS11H X 1/2 Finished Bore B-Hub Sprocket, 11 Teeth, 3/8" Pitch, 1/2" Finished Bore
  9. G&G 008-3516 OEM Weld on Hubs, 35 Hub Series, 1" Bore Size, Standard Keyways: 1/4
  10. 35B20H-5/8" Bore 20 Tooth Sprocket for 35 Roller Chain

  #1

TRITAN 40BS12H X 3/4 Finished Bore B-Hub Sprocket, 12 Teeth, 1/2" Pitch, 3/4" Finished Bore

Model: 40BS12H X 3/4   |    Mpn: 40BS12H X 3/4   |    Ean: 0888569093691   |    PartNumber: 40BS12H X 3/4   |   Asin: B00VI4S1LC

TRITAN Finished Bore B-Hub Sprocket features one setscrew over the keyway and a second setscrew at 90 degrees. With high quality carbon steel construction, this sprocket with 1/2 inch pitch has 12 teeth, 3/4 inch finished bore and a recessed groove in hub for chain clearance. Sprocket has a black oxide finish and is heat treated. ANSI sprocket # 40. TRITAN produces world class power transmission products using select alloy steel, advanced quality control and testing systems to ensure the highest quality.

Features

  • ANSI sprocket # 40
  • High quality carbon steel construction
  • One setscrew over the keyway and a second setscrew at 90 degrees
  • For use with roller chain
  • Includes Keyway and 2 Set Screws
  • See more on Amazon...

Brand: Tritan   |   Manufacturer: Bearings Ltd.

Item Dimensions: 1 x 2.3 x 2.3 inches (2.5 x 5.8 x 5.8 cm)   |   Package Dimensions: 1.3 x 2.2 x 2.4 inches (3.3 x 5.6 x 6.1 cm)

Amazon Price: $8.20 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $8.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Oregon 27958 3/8" Low Profile Pitch 6-Tooth Consumer Spur Sprocket

Model: 27958   |    Mpn: 27958   |    Ean: 5400182003748   |    PartNumber: 27958   |   Asin: B01HZPHQIG

A simple, durable replacement sprocket for electric and small gas chain saws. Fits many models, including but not limited to the following: Homelite - 190, Homelite - LITTLE RED, Homelite - Super 2CC, Homelite - XEL, Homelite - XL MINI, Homelite - VI Super 2, Homelite - Super 2, Homelite - XL2, Homelite - XL

Features

  • Oregon 27958 Replacement Consumer Spur Sprocket (Bearing 28034 installed)
  • For 3/8 Low Profile Pitch Chain Saws, 6-Tooth Sprocket
  • Replacement schedule: Every two chain loops
  • For Home lite: 190, Little Red, Super 2, Super 2cc, VI Super 2, XL, XL2, XL Mini Saws
  • See more on Amazon...

Brand: Oregon   |   Manufacturer: Oregon

Item Dimensions: 1 x 1 x 1 inches (2.5 x 2.5 x 2.5 cm)   |   Package Dimensions: 2.3 x 3.9 x 3.9 inches (5.8 x 9.9 x 9.9 cm)

Amazon Price: $10.00 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $10.00

Warranty: Please Contact Seller for Product Warranty Information.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Tsubaki 40B15F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pitch, 15 Teeth, 1" Bore

Model: H40B15F-1   |    Mpn: H40B15F-1   |    Ean: 0097039297266   |    PartNumber: H40B15F-1   |   Asin: B0025Q34AU

This Tsubaki roller chain sprocket has a 1/2-inch pitch, fits size 40 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It is a Type B sprocket with a hub projection encircling the bore on one side and is ready for installation on a shaft of the appropriate diameter. The teeth of the sprocket have been hardened by electrical induction or flame, further increasing their durability against wear. It meets International Organization for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket is suitable for use in a broad range of applications involving light to moderate loads and ongoing, high-cycle operations, including vehicle transmission systems, construction and agricultural equipment, conveyors, and factory manufacturing and assembly lines, among others.

A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The distance from the peak of one tooth to the next is called the pitch, and is commonly measured in 1/8-inch increments. The sprocket transfers power and motion by a roller chain that is threaded over the teeth of the sprocket. The alignment of the chain with the sprocket's pitch prevents the chain from slipping so that no power is lost. In the center of the sprocket is the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is often fitted to the sprocket s hub to custom-fit the sprocket onto a shaft to hold it firmly in place. A hub is a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets with no hubs are Type A sprockets. For applications requiring sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to fit all shafts can be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad range of applications where the drive power of an engine needs to be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

U.S. Tsubaki Power Transmission manufactures a variety of chains, sprockets, and other power transmission components that meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1917, is headquartered in Wheeling, IL.

Features

  • Single strand sprocket with one set of teeth around the circumference for applications where a single chain can support the torque and load
  • Pitch of 1/2 inch for size 40 chains
  • Ready-to-install finished bore with a wide hub on one side
  • Type B sprocket with a hub projection on one side to accommodate various types of bushings to help prevent sprocket from slipping on the shaft
  • Sprocket teeth hardened by electrical induction or flame to increase teeth durability against wear, lengthening the service life of the sprocket
  • See more on Amazon...

Brand: Tsubaki   |   Manufacturer: Tsubaki

Item Dimensions: 0.24 x 0.31 x 0.31 inches (0.6 x 0.8 x 0.8 cm)   |   Package Dimensions: 1.1 x 2.9 x 3.1 inches (2.8 x 7.4 x 7.9 cm)

Amazon Price: $12.84 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $12.84 | Used Price: $15.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

5" Diameter - 4 Step Pulley 1/2" - 5/8" Fixed Bore - Die Cast by Congress

Model: CECOMINOD092225   |    Mpn: 1L843   |    Ean: 0663001402756   |    PartNumber: 1L843   |   Asin: B006H0ZJAI

Overall height = 2 7/8" with 3/16" keyway. For Use With One 4L or A Section V-Belt

Features

  • 1st step = 2"
  • 2nd step = 3
  • 3rd step = 4
  • 4th step = 5
  • Fits 1/2 & 5/8 shaft - Reducer Bushing Included
  • See more on Amazon...

Brand: CONGRESS DRIVES   |   Manufacturer: CONGRESS DRIVES

Amazon Price: $24.38 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $24.38

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Browning 35A40 Plate Roller Chain Sprocket, Single Strand, Type A Hub, Steel, 5/8" Stocked Bore, 40 Teeth

Model: 1107804   |    Mpn: 35A40   |    Ean: 0662289110506   |    PartNumber: 35A40   |   Asin: B00EJXNROU

Features

Brand: Browning   |   Manufacturer: Regal

Package Dimensions: 1.3 x 6.4 x 6.4 inches (3.3 x 16.3 x 16.3 cm)

Amazon Price: $27.85 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $27.85

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Tsubaki 40B12F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pitch, 12 Teeth, 1" Bore

Model: H40B12F-1   |    Mpn: H40B12F-1   |    Ean: 0097039323903   |    PartNumber: H40B12F-1   |   Asin: B002KTUKV8

This Tsubaki roller chain sprocket has a 1/2-inch pitch, fits size 40 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It is a Type B sprocket with a hub projection encircling the bore on one side and is ready for installation on a shaft of the appropriate diameter. The teeth of the sprocket have been hardened by electrical induction or flame, further increasing their durability against wear. It meets International Organization for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket is suitable for use in a broad range of applications involving light to moderate loads and ongoing, high-cycle operations, including vehicle transmission systems, construction and agricultural equipment, conveyors, and factory manufacturing and assembly lines, among others.

A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The distance from the peak of one tooth to the next is called the pitch, and is commonly measured in 1/8-inch increments. The sprocket transfers power and motion by a roller chain that is threaded over the teeth of the sprocket. The alignment of the chain with the sprocket's pitch prevents the chain from slipping so that no power is lost. In the center of the sprocket is the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is often fitted to the sprocket s hub to custom-fit the sprocket onto a shaft to hold it firmly in place. A hub is a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets with no hubs are Type A sprockets. For applications requiring sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to fit all shafts can be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad range of applications where the drive power of an engine needs to be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

U.S. Tsubaki Power Transmission manufactures a variety of chains, sprockets, and other power transmission components that meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1917, is headquartered in Wheeling, IL.

Features

  • Single strand sprocket with one set of teeth around the circumference for applications where a single chain can support the torque and load
  • Pitch of 1/2 inch for size 40 chains
  • Ready-to-install finished bore with a wide hub on one side
  • Type B sprocket with a hub projection on one side to accommodate various types of bushings to help prevent sprocket from slipping on the shaft
  • Sprocket teeth hardened by electrical induction or flame to increase teeth durability against wear, lengthening the service life of the sprocket
  • See more on Amazon...

Brand: Tsubaki   |   Manufacturer: Tsubaki

Package Dimensions: 0.6 x 2.4 x 2.4 inches (1.5 x 6.1 x 6.1 cm)

Amazon Price: $10.80 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $10.80

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

04C 10T 10 Teeth 6mm 7mm 8mm Bore 6.35mm Pitch Motor Steel Metal Chain Sprocket - 6mm (2222x1

 Ean: 0657419174909   |    PartNumber: giveyoulucky_74   |   Asin: B07DQQCFRQ

Specifications:
Gear Number: 10 Teeth
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.
Package Includes:
1 x Sprocket

Features

  • Type: Sprocket
  • Material: 45# Steel
  • Pitch: 6.35mm, 1/4 (Approx.)
  • Bore Diameter: 6mm/0.24, 7mm/0.28, 8mm/0.31 (Approx.)
  • Widely used in hardware, molds, and the occasion of the mechanical.
  • See more on Amazon...

Brand: giveyoulucky   |   Manufacturer: giveyoulucky

Amazon Price: $4.36 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $4.36

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

TRITAN 35BS11H X 1/2 Finished Bore B-Hub Sprocket, 11 Teeth, 3/8" Pitch, 1/2" Finished Bore

Model: 35BS11H X 1/2   |    Mpn: 35BS11H X 1/2   |    Ean: 0888569090430   |    PartNumber: 35BS11H X 1/2   |   Asin: B00VI4NZ9A

TRITAN Finished Bore B-Hub Sprocket features two setscrews at 90 degrees. With high quality carbon steel construction, this sprocket with 3/8 inch pitch has 11 teeth and a recessed groove in hub for chain clearance. Sprocket has a black oxide finish and is heat treated. ANSI sprocket # 35. TRITAN produces world class power transmission products using select alloy steel, advanced quality control and testing systems to ensure the highest quality.

Features

  • ANSI sprocket # 35
  • High quality carbon steel construction
  • Two setscrews at 90 degrees
  • For use with roller chain
  • Includes 2 Set Screws - No Keyway
  • See more on Amazon...

Brand: Tritan   |   Manufacturer: Bearings Ltd.

Package Dimensions: 0.55 x 1.57 x 2.2 inches (1.4 x 4.0 x 5.6 cm)

Amazon Price: $6.50 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $6.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

G&G 008-3516 OEM Weld on Hubs, 35 Hub Series, 1" Bore Size, Standard Keyways: 1/4

Model: 008-3516   |    Mpn: 008-3516   |    PartNumber: 008-3516   |   Asin: B017BGMH2E

G&G Manufacturing 008-3516 OEM Weld On Hubs, Hub Series: 35, Bore Size: 1", Std. KW: 1/4. Designed for use with G&G WELDASPROCKETS in applications requiring a specific length through bore. Round bore OEM Weld on Hubs are furnished with standard keyways and two (2) set screws. Made in the USA by G&G Manufacturing Company. Hub series 35 fits flush on #35 chain WELDASPROCKETS.

Features

  • OEM Weld On Hubs
  • Hub Series: 35
  • Bore Size: 1
  • Std. KW: 1/4
  • Made in the USA by G&G Manufacturing Company
  • See more on Amazon...

Brand: G & G Manufacturing Company   |   Manufacturer: G&G Manufacturing

Package Dimensions: 0.2 x 1.3 x 4.9 inches (0.5 x 3.3 x 12.4 cm)

Amazon Price: $10.80 | as of 05/20/2019(3:49am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $22.36

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

35B20H-5/8" Bore 20 Tooth Sprocket for 35 Roller Chain

 Ean: 0699977869187   |    PartNumber: SP-35B20H-5/8   |   Asin: B01FV5R8EE

35B20H-5/8" Bore 20 Tooth Sprocket for 35 Roller Chain

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

-

# of Teeth: 20

Bore Size: 5/8 inch

L.T.B: 3/4 inch

OD: 2.12 inch

Pitch Size: 3/8 inch

Type: B Type

Material: AISI 1045 Medium Carbon Steel

Style: Black Oxide

Note: 0.187 inch Keyway and Harden Teeth

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Package Dimensions: 2.2 x 2.4 x 7.5 inches (5.6 x 6.1 x 19.1 cm)

Amazon Price: $10.58 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $10.58

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

KOVPT # 40 Chain Roller Sprocket 3 Teeth Bore 0.75 Inch Type B Pitch 0.5 Inch Carbon Steel Black 1Pcs

 Ean: 0663591553913   |    PartNumber: 1   |   Asin: B078Z7QC35

# 40 Roller Chain Sprocket B Type Hub
Sprocket Pitch: 0.5" 12.7mm)
Number of Teeth: 33 Teeth
Bore Diameter: 0.75" (19.05mm)
Outside Diameter: 5.536" (140.6144mm)
Hub Diameter: 3.25" (82.55mm)
Overall Thick: 1.181 inches( 30mm)
Material: #45 carbon steel for strength and durability

Features

  • Material:#45 Carbon Steel
  • Teeth Number: 33 Teeth ; Keyway:0.1875*0.0938(4.7625*2.38252mm)
  • Bore Diameter :3/4 ; Pitch:1/2
  • Outside Diameter: 5.536
  • What You Get : 1PCS x Roller Chain Plate Sprocket+2PCS Screws
  • See more on Amazon...

Brand: KOVPT   |   Manufacturer: KANZNAN

Package Dimensions: 1.54 x 5.51 x 5.71 inches (3.9 x 14.0 x 14.5 cm)

Amazon Price: $32.99 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $32.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

TRITAN 40BS10H X 3/4 Finished Bore B-Hub Sprocket, 10 Teeth, 1/2" Pitch, 3/4" Finished Bore

Model: 40BS10H X 3/4   |    Mpn: 40BS10H X 3/4   |    Ean: 0888569093615   |    PartNumber: 40BS10H X 3/4   |   Asin: B00VI4RLZ4

TRITAN Finished Bore B-Hub Sprocket features one setscrew over the keyway and a second setscrew at 90 degrees. With high quality carbon steel construction, this sprocket with 1/2 inch pitch has 10 teeth, 3/4 inch finished bore and a recessed groove in hub for chain clearance. Sprocket has a black oxide finish and is heat treated. ANSI sprocket # 40. TRITAN produces world class power transmission products using select alloy steel, advanced quality control and testing systems to ensure the highest quality.

Features

  • ANSI sprocket # 40
  • High quality carbon steel construction
  • One setscrew over the keyway and a second setscrew at 90 degrees
  • For use with roller chain
  • Includes Keyway and 2 Set Screws
  • See more on Amazon...

Brand: Tritan   |   Manufacturer: Bearings Ltd.

Item Dimensions: 1.1 x 2.1 x 2 inches (2.8 x 5.3 x 5.1 cm)   |   Package Dimensions: 2 x 2 x 2 inches (5.1 x 5.1 x 5.1 cm)

First Available: 2017-12-12

Amazon Price: $9.62 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $10.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

40B60T 1" Bore Go Kart Live Axle Sprocket 60 Teeth for 40 41 420 Roller Chain

 Ean: 0799789047688   |    PartNumber: SP-40B60T-1   |   Asin: B01MSWYW6K

40B60T 1" Bore Go Kart Live Axle Sprocket 60 Teeth for 40 41 420 Roller Chain

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

-This is commonly used on Yerf-dog and Murray go karts and can be used on any 1" live axle.

# of Teeth: 60

Bore Size: 1 inch

L.T.B: 1.06 inch

OD: 9.84 inch

Pitch Size: 1/2 inch

Type: B Type

Material: AISI 1045 Medium Carbon Steel

Style: Black Oxide

Note: This is commonly used on Yerf-dog and Murray go karts and can be used on any 1" live axle and it has 1/4 inch Keyway and No Harden Teeth with 3 Center Holes and 1 Key .

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • This is commonly used on Yerf-dog and Murray go karts and can be used on any 1 live axle.
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Package Dimensions: 1.89 x 10.71 x 10.98 inches (4.8 x 27.2 x 27.9 cm)

Amazon Price: $37.50 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $37.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Tsubaki 35B10FF Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #35 ANSI No., 3/8" Pitch, 10 Teeth, 3/8" Bore

Model: 35B10FF   |    Mpn: 35B10FF   |    Ean: 0097039319975   |    PartNumber: 35B10FF   |   Asin: B002KTYKGO

This Tsubaki roller chain sprocket has a 3/8-inch pitch, fits size 35 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It is a Type B sprocket with a hub projection encircling the bore on one side and is ready for installation on a shaft of the appropriate diameter. The teeth of the sprocket have been hardened by electrical induction or flame, further increasing their durability against wear. It meets International Organization for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket is suitable for use in a broad range of applications involving light to moderate loads and ongoing, high-cycle operations, including vehicle transmission systems, construction and agricultural equipment, conveyors, and factory manufacturing and assembly lines, among others.

A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The distance from the peak of one tooth to the next is called the pitch, and is commonly measured in 1/8-inch increments. The sprocket transfers power and motion by a roller chain that is threaded over the teeth of the sprocket. The alignment of the chain with the sprocket's pitch prevents the chain from slipping so that no power is lost. In the center of the sprocket is the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is often fitted to the sprocket s hub to custom-fit the sprocket onto a shaft to hold it firmly in place. A hub is a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets with no hubs are Type A sprockets. For applications requiring sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to fit all shafts can be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad range of applications where the drive power of an engine needs to be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

U.S. Tsubaki Power Transmission manufactures a variety of chains, sprockets, and other power transmission components that meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1917, is headquartered in Wheeling, IL.

Features

  • Single strand sprocket with one set of teeth around the circumference for applications where a single chain can support the torque and load
  • Pitch of 3/8 inch for size 35 chains
  • Ready-to-install finished bore with a wide hub on one side
  • Type B sprocket with a hub projection on one side to accommodate various types of bushings to help prevent sprocket from slipping on the shaft
  • Sprocket teeth hardened by electrical induction or flame to increase teeth durability against wear, lengthening the service life of the sprocket
  • See more on Amazon...

Brand: Tsubaki   |   Manufacturer: Tsubaki

Package Dimensions: 0.8 x 1.3 x 2.3 inches (2.0 x 3.3 x 5.8 cm)

Amazon Price: $8.33 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $8.33

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Tsubaki 35B18F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #35 ANSI No., 3/8" Pitch, 18 Teeth, 1" Bore

Model: H35B18F-1   |    Mpn: H35B18F-1   |    Ean: 0097039296467   |    PartNumber: H35B18F-1   |   Asin: B002E7LSLC

This Tsubaki roller chain sprocket has a 3/8-inch pitch, fits size 35 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It is a Type B sprocket with a hub projection encircling the bore on one side and is ready for installation on a shaft of the appropriate diameter. The teeth of the sprocket have been hardened by electrical induction or flame, further increasing their durability against wear. It meets International Organization for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket is suitable for use in a broad range of applications involving light to moderate loads and ongoing, high-cycle operations, including vehicle transmission systems, construction and agricultural equipment, conveyors, and factory manufacturing and assembly lines, among others.

A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The distance from the peak of one tooth to the next is called the pitch, and is commonly measured in 1/8-inch increments. The sprocket transfers power and motion by a roller chain that is threaded over the teeth of the sprocket. The alignment of the chain with the sprocket's pitch prevents the chain from slipping so that no power is lost. In the center of the sprocket is the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is often fitted to the sprocket s hub to custom-fit the sprocket onto a shaft to hold it firmly in place. A hub is a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets with no hubs are Type A sprockets. For applications requiring sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to fit all shafts can be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad range of applications where the drive power of an engine needs to be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

U.S. Tsubaki Power Transmission manufactures a variety of chains, sprockets, and other power transmission components that meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1917, is headquartered in Wheeling, IL.

Features

  • Single strand sprocket with one set of teeth around the circumference for applications where a single chain can support the torque and load
  • Pitch of 3/8 inch for size 35 chains
  • Ready-to-install finished bore with a wide hub on one side
  • Type B sprocket with a hub projection on one side to accommodate various types of bushings to help prevent sprocket from slipping on the shaft
  • Sprocket teeth hardened by electrical induction or flame to increase teeth durability against wear, lengthening the service life of the sprocket
  • See more on Amazon...

Brand: Tsubaki   |   Manufacturer: Tsubaki

Package Dimensions: 0.8 x 2.3 x 2.4 inches (2.0 x 5.8 x 6.1 cm)

Amazon Price: $10.97 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $10.97

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Martin Roller Chain Sprocket, Bored-to-Size, Type B Hub, Single Strand, 41 Chain Size, 0.5" Pitch, 10 Teeth, 0.75" Bore Dia., 1.84" OD, 1.25" Hub Dia., 0.227" Width

 Ean: 0697950008066   |    PartNumber: 41BS10 3/4   |   Asin: B0045JJX9G

The Martin type BS sprocket, also known as a bored-to-size sprocket, includes two setscrews and a keyway, and is suitable for use with the series 41 chain with a 1/2 pitch. This sprocket has been adapted for installation on the shaft without additional components. Made from high carbon steel, it has high strength and durability.

This sprocket has a hub extension on one side to provide stability and allow for the use of a full-depth keyway and two standard setscrews to attach the sprocket onto a shaft.

The options for this class of sprocket are: number of teeth from 9 to 112; outside diameter from 1.670 to 18.120 ; stock bore size from 1/2" to 1-1/2 ; length through bore: 7/8 to 1-3/16; and approximate weight from 0.20 lbs to 18.81 lbs. The chain row width is 0.227 nominal. The keyway is on the centerline of the tooth. The following exceptions are present: the 9- through 15-tooth options have no keyway and use two (2) 1/4 setscrews only in the 1/2 shaft size. With this series of sprockets, the hub diameters will vary to suit different bore sizes. All Martin sprockets meet or exceed ANSI standards.

A sprocket is a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interacts with another sprocket. Gears can be used to transmit power around a corner, based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider s legs to the wheels making the bike move.

Martin Sprocket & Gear manufactures power transmission and conveying products. The company was founded in 1951 and is headquartered in Arlington, TX. Martin provides tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut f r Normung (DIN) standards.

Features

  • For use with series 41 chain, 1/2" pitch for driver or driven sprocket needs
  • Type BS sprocket with two setscrews and a keyway offers a stable and secure attachment to the shaft
  • Shaft diameter size from 1/2 to 1-1/2 for a variety of applications
  • Varying numbers of teeth, hub sizes, and stock bore sizes offer application flexibility
  • High carbon steel for strength and durability
  • See more on Amazon...

Brand: Martin   |   Manufacturer: MARTIN

Package Dimensions: 1 x 1.94 x 1.94 inches (2.5 x 4.9 x 4.9 cm)

Amazon Price: $17.41 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 2-3 business days
List Price: $17.41

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

TRITAN 35BS15H X 5/8 Finished Bore B-Hub Sprocket, 15 Teeth, 3/8" Pitch, 5/8" Finished Bore

Model: 35BS15H X 5/8   |    Mpn: 35BS15H X 5/8   |    Ean: 0888569090591   |    PartNumber: 35BS15H X 5/8   |   Asin: B00VI4OIUK

TRITAN Finished Bore B-Hub Sprocket features one setscrew over the keyway and a second setscrew at 90 degrees. With high quality carbon steel construction, this sprocket with 3/8 inch pitch has 15 teeth and 5/8 inch finished bore. Sprocket has a black oxide finish and is heat treated. ANSI sprocket # 35. TRITAN produces world class power transmission products using select alloy steel, advanced quality control and testing systems to ensure the highest quality.

Features

  • ANSI sprocket # 35
  • High quality carbon steel construction
  • One setscrew over the keyway and a second setscrew at 90 degrees
  • For use with roller chain
  • Includes Keyway and 2 Set Screws
  • See more on Amazon...

Brand: Tritan   |   Manufacturer: Bearings Ltd.

Item Dimensions: 5.1 x 5.5 x 6.4 inches (13.0 x 14.0 x 16.3 cm)   |   Package Dimensions: 1 x 2 x 2 inches (2.5 x 5.1 x 5.1 cm)

Amazon Price: $6.87 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $6.87

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

40BB17H-1/2 IDLER SPROCKET With Insert Bearing 203KRR2

 PartNumber: 40BB17H-1/2   |   Asin: B01BNQAZVI

Red Boar Chain maintains a competitive edge from small orders to the largest. We provide quality products to some of the nations largest Industrial corporations from coast to coast. We specialize in quality precision roller chain, conveyor chain, mill

Features

Brand: RED BOAR Chain   |   Manufacturer: IMPORT

Amazon Price: $9.54 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $9.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

40BB17H-1/2''Bore 17 Tooth Idler Sprocket for 40 Roller Chain

 Ean: 0699909997131   |    PartNumber: SP-40BB17H-1/2   |   Asin: B01FV5QV6A

40BB17H-1/2''Bore 17 Tooth Idler Sprocket for 40 Roller Chain

-Brand New

-Free Shipping within the Continental United States

-Same business day order processing before 12:30PM PDT

-Satisfaction Guaranteed

-

# of Teeth: 17

Bore Size: 1/2 inch

L.T.B: 0.72 inch

OD: 2.99 inch

Pitch Size: 1/2 inch

Type: B Type

Material: AISI 1045 Medium Carbon Steel

Style: Black Oxide

Note: Harden Teeth with 203KRR2 Bearing

Features

  • Brand New
  • Free Shipping within the Continental United States
  • Same business day order processing before 12:30PM PDT
  • Satisfaction Guaranteed
  • See more on Amazon...

Brand: Jeremywell   |   Manufacturer: Jeremywell

Package Dimensions: 0.7 x 2.5 x 5 inches (1.8 x 6.4 x 12.7 cm)

Amazon Price: $12.88 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 1-2 business days
List Price: $12.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Tsubaki 50B12F-1 Finished Bore Sprocket, Single Strand, Inch, #50 ANSI No., 5/8" Pitch, 12 Teeth, 1" Bore

Model: H50B12F-1   |    Mpn: H50B12F-1   |    Ean: 0097039327253   |    PartNumber: H50B12F-1   |   Asin: B0026GUHQS

This Tsubaki roller chain sprocket has a 5/8-inch pitch, fits size 50 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It is a Type B sprocket with a hub projection encircling the bore on one side and is ready for installation on a shaft of the appropriate diameter. The teeth of the sprocket help prevent slipping and binding to avoid power loss in assemblies. It meets International Organization for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket is suitable for use in a broad range of applications involving light to moderate loads and ongoing, high-cycle operations, including vehicle transmission systems, construction and agricultural equipment, conveyors, and factory manufacturing and assembly lines, among others.

A roller chain sprocket is a thin wheel with deep, uniformly spaced teeth ringing its circumference. The distance from the peak of one tooth to the next is called the pitch, and is commonly measured in 1/8-inch increments. The sprocket transfers power and motion by a roller chain that is threaded over the teeth of the sprocket. The alignment of the chain with the sprocket's pitch prevents the chain from slipping so that no power is lost. In the center of the sprocket is the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is often fitted to the sprocket s hub to custom-fit the sprocket onto a shaft to hold it firmly in place. A hub is a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets with no hubs are Type A sprockets. For applications requiring sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to fit all shafts can be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are used in a broad range of applications where the drive power of an engine needs to be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining equipment, aeronautics, robotics and space exploration, among others.

U.S. Tsubaki Power Transmission manufactures a variety of chains, sprockets, and other power transmission components that meet International Organization for Standardization (ISO) standards for quality assurance. The company, founded in 1917, is headquartered in Wheeling, IL.

Features

  • Single strand sprocket with one set of teeth around the circumference for applications where a single chain can support the torque and load
  • Pitch of 5/8 inch for size 50 chains
  • Ready-to-install finished bore with a wide hub on one side
  • Type B sprocket with a hub projection on one side to accommodate various types of bushings to help prevent sprocket from slipping on the shaft
  • Sprocket teeth help prevent slipping and binding to avoid power loss in assemblies
  • See more on Amazon...

Brand: Tsubaki   |   Manufacturer: Tsubaki

Package Dimensions: 1.2 x 2.9 x 3.2 inches (3.0 x 7.4 x 8.1 cm)

Amazon Price: $14.54 | as of 05/20/2019(3:49am pst)
Availibility: Usually ships in 24 hours
List Price: $14.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. TRITAN 40BS12H X 3/4 Finished Bore B-Hub Sprocket, 12 Teeth, 1/2" Pitch, 3/4" Finished Bore
  2. Oregon 27958 3/8" Low Profile Pitch 6-Tooth Consumer Spur Sprocket
  3. Tsubaki 40B15F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pit...
  4. 5" Diameter - 4 Step Pulley 1/2" - 5/8" Fixed Bore - Die Cast by Congress
  5. Browning 35A40 Plate Roller Chain Sprocket, Single Strand, Type A Hub, Steel, 5/8" Stocked Bore, 40 ...
  6. Tsubaki 40B12F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pit...
  7. 04C 10T 10 Teeth 6mm 7mm 8mm Bore 6.35mm Pitch Motor Steel Metal Chain Sprocket - 6mm (2222x1
  8. TRITAN 35BS11H X 1/2 Finished Bore B-Hub Sprocket, 11 Teeth, 3/8" Pitch, 1/2" Finished Bore
  9. G&G 008-3516 OEM Weld on Hubs, 35 Hub Series, 1" Bore Size, Standard Keyways: 1/4
  10. 35B20H-5/8" Bore 20 Tooth Sprocket for 35 Roller Chain

Most Wished For

  1. TRITAN 40BS12H X 3/4 Finished Bore B-Hub Sprocket, 12 Teeth, 1/2" Pitch, 3/4" Finished Bore
  2. Oregon 27958 3/8" Low Profile Pitch 6-Tooth Consumer Spur Sprocket
  3. Tsubaki 40B15F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pit...
  4. 5" Diameter - 4 Step Pulley 1/2" - 5/8" Fixed Bore - Die Cast by Congress
  5. Browning 35A40 Plate Roller Chain Sprocket, Single Strand, Type A Hub, Steel, 5/8" Stocked Bore, 40 ...
  6. Tsubaki 40B12F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pit...
  7. 04C 10T 10 Teeth 6mm 7mm 8mm Bore 6.35mm Pitch Motor Steel Metal Chain Sprocket - 6mm (2222x1
  8. TRITAN 35BS11H X 1/2 Finished Bore B-Hub Sprocket, 11 Teeth, 3/8" Pitch, 1/2" Finished Bore
  9. G&G 008-3516 OEM Weld on Hubs, 35 Hub Series, 1" Bore Size, Standard Keyways: 1/4
  10. 35B20H-5/8" Bore 20 Tooth Sprocket for 35 Roller Chain

Most Gifted

  1. TRITAN 40BS12H X 3/4 Finished Bore B-Hub Sprocket, 12 Teeth, 1/2" Pitch, 3/4" Finished Bore
  2. Oregon 27958 3/8" Low Profile Pitch 6-Tooth Consumer Spur Sprocket
  3. Tsubaki 40B15F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pit...
  4. 5" Diameter - 4 Step Pulley 1/2" - 5/8" Fixed Bore - Die Cast by Congress
  5. Browning 35A40 Plate Roller Chain Sprocket, Single Strand, Type A Hub, Steel, 5/8" Stocked Bore, 40 ...
  6. Tsubaki 40B12F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pit...
  7. 04C 10T 10 Teeth 6mm 7mm 8mm Bore 6.35mm Pitch Motor Steel Metal Chain Sprocket - 6mm (2222x1
  8. TRITAN 35BS11H X 1/2 Finished Bore B-Hub Sprocket, 11 Teeth, 3/8" Pitch, 1/2" Finished Bore
  9. G&G 008-3516 OEM Weld on Hubs, 35 Hub Series, 1" Bore Size, Standard Keyways: 1/4
  10. 35B20H-5/8" Bore 20 Tooth Sprocket for 35 Roller Chain

Top Selling

  1. TRITAN 40BS12H X 3/4 Finished Bore B-Hub Sprocket, 12 Teeth, 1/2" Pitch, 3/4" Finished Bore
  2. Oregon 27958 3/8" Low Profile Pitch 6-Tooth Consumer Spur Sprocket
  3. Tsubaki 40B15F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pit...
  4. 5" Diameter - 4 Step Pulley 1/2" - 5/8" Fixed Bore - Die Cast by Congress
  5. Browning 35A40 Plate Roller Chain Sprocket, Single Strand, Type A Hub, Steel, 5/8" Stocked Bore, 40 ...
  6. Tsubaki 40B12F-1 Finished Bore Sprocket, Single Strand, Hardened Teeth, Inch, #20 ANSI No., 1/2" Pit...
  7. 04C 10T 10 Teeth 6mm 7mm 8mm Bore 6.35mm Pitch Motor Steel Metal Chain Sprocket - 6mm (2222x1
  8. TRITAN 35BS11H X 1/2 Finished Bore B-Hub Sprocket, 11 Teeth, 3/8" Pitch, 1/2" Finished Bore
  9. G&G 008-3516 OEM Weld on Hubs, 35 Hub Series, 1" Bore Size, Standard Keyways: 1/4
  10. 35B20H-5/8" Bore 20 Tooth Sprocket for 35 Roller Chain



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.