Frontpage > Industrial > Power Transmission > Silent Chains

Best Silent Chains - Buying Guide

Last Updated: 01/18/2019

Share on


  #1

PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 6ft Length

 Ean: 0662345009508   |    PartNumber: 0418050SL   |   Asin: B00CLG3FNU

B / 5L PowerTwist Plus V-Belts are a great alternative to conventional endless wrapped rubber V-belts of classical cross sections. Combining industry standard horsepower ratings with superior performance in harsh operating environments, PowerTwist Plus is a permanent replacement for traditional rubber V-belts. PowerTwist Plus unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys as PowerTwist Plus V-Belts run in industry standard pulley grooves. Save money by reducing V-belt inventory PowerTwist Plus V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Plus in the two most common cross sections, A/ 4L and B/5L, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Plus has an operating temperature range of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to 3L, A/4L, B/5L, and C drives, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Drop-in replacement on live roller conveyors; runs in V- and round pulleys
  • Easily installed without the need to dismantle the conveyor and proven to outlast and outperform rubber belts, especially on curves.
  • Reduced spare belt Inventory; numerous belt lengths from just one box.
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 0.5 x 6 x 14.9 inches (1.3 x 15.2 x 37.8 cm)

Amazon Price: $60.00 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 24 hours
List Price: $104.28

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 5ft Length

Model: 0418010SL   |    Mpn: 0418010SL   |    Ean: 0662345018937   |    PartNumber: 0418010SL   |   Asin: B00CLG38JQ

3L PowerTwist Plus V-Belts are a great alternative to conventional endless wrapped rubber V-belts of classical cross sections. Combining industry standard horsepower ratings with superior performance in harsh operating environments, PowerTwist Plus is a permanent replacement for traditional rubber V-belts. PowerTwist Plus unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys as PowerTwist Plus V-Belts run in industry standard pulley grooves. Save money by reducing V-belt inventory PowerTwist Plus V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Plus in the two most common cross sections, A/ 4L and B/5L, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Plus has an operating temperature range of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to 3L, A/4L, B/5L, and C drives, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Drop-in replacement for traditional V-belts; same horsepower ratings as classical rubber V-belts.
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.
  • Reduced spare V-belt Inventory; numerous belt lengths from just one box.
  • Longer belt life then rubber V-belts. Reduced vibration means less noise and increased component life
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 0.63 x 3.78 x 12.95 inches (1.6 x 9.6 x 32.9 cm)

Amazon Price: $45.50 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 24 hours
List Price: $73.15

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 25ft Length

Model: 0405050   |    Mpn: 0405050   |    Ean: 0662345003377   |    PartNumber: 0405050   |   Asin: B001ELV6GQ

B / 5L PowerTwist Plus V-Belts are a great alternative to conventional endless wrapped rubber V-belts of classical cross sections. Combining industry standard horsepower ratings with superior performance in harsh operating environments, PowerTwist Plus is a permanent replacement for traditional rubber V-belts. PowerTwist Plus unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys as PowerTwist Plus V-Belts run in industry standard pulley grooves. Save money by reducing V-belt inventory PowerTwist Plus V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Plus in the two most common cross sections, A/ 4L and B/5L, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Plus has an operating temperature range of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to 3L, A/4L, B/5L, and C drives, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Ultra-high grip top with an extremely pliable surface pattern.
  • SuperGrip Top surface will not to delaminate.
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.
  • Reduced spare V-belt Inventory; numerous belt lengths from just one box..
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Item Dimensions: 21 x 21 x 28 inches (53.3 x 53.3 x 71.1 cm)   |   Package Dimensions: 4 x 10.4 x 10.9 inches (10.2 x 26.4 x 27.7 cm)

Amazon Price: $238.95 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 24 hours
List Price: $238.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

PowerTwist Plus V-Belt, A / 4L Profile, 1/2" Width, 25ft Length

Model: 0405030   |    Mpn: 0405030   |    Ean: 0662345002509   |    PartNumber: 0405030   |   Asin: B001ELAKR2

A / 4L PowerTwist Plus V-Belts are a great alternative to conventional endless wrapped rubber V-belts of classical cross sections. Combining industry standard horsepower ratings with superior performance in harsh operating environments, PowerTwist Plus is a permanent replacement for traditional rubber V-belts. PowerTwist Plus unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys as PowerTwist Plus V-Belts run in industry standard pulley grooves. Save money by reducing V-belt inventory PowerTwist Plus V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Plus in the two most common cross sections, A/ 4L and B/5L, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Plus has an operating temperature range of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to 3L, A/4L, B/5L, and C drives, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Durable 70A Polyurethane SuperGrip Top provides superior traction for tough applications.
  • SuperGrip Top surface will not to delaminate.
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.
  • Reduced spare V-belt Inventory; numerous belt lengths from just one box..
  • See more on Amazon...

Brand: PowerTwist   |   Manufacturer: Fenner Drives

Package Dimensions: 4 x 10.4 x 10.9 inches (10.2 x 26.4 x 27.7 cm)

Amazon Price: $244.51 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 24 hours
List Price: $244.51

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 25ft Length

Model: 3L   |    Mpn: 0405010   |    Ean: 0094714752065   |    PartNumber: 0405010   |   Asin: B001ELT8ZM

3L PowerTwist Plus V-Belts are a great alternative to conventional endless wrapped rubber V-belts of classical cross sections. Combining industry standard horsepower ratings with superior performance in harsh operating environments, PowerTwist Plus is a permanent replacement for traditional rubber V-belts. PowerTwist Plus unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys as PowerTwist Plus V-Belts run in industry standard pulley grooves. Save money by reducing V-belt inventory PowerTwist Plus V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Plus in the two most common cross sections, A/ 4L and B/5L, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Plus has an operating temperature range of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to 3L, A/4L, B/5L, and C drives, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Drop-in replacement on live roller conveyors; runs in V- and round pulleys
  • Easily installed without the need to dismantle the conveyor and proven to outlast and outperform rubber belts, especially on curves.
  • Reduced spare belt Inventory; numerous belt lengths from just one box.
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 4 x 10.3 x 10.9 inches (10.2 x 26.2 x 27.7 cm)

Amazon Price: $249.91 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 24 hours
List Price: $249.91

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Fenner Drives 5700227 Metal Mini Butt Welding Clamp, 2" Width

Model: 03758670   |    Mpn: 5700227   |    Ean: 0662345027212   |    PartNumber: 5700227   |   Asin: B01AC4ROUM

Suitable for use with Eagle belting up to and including 8mm round and A section Vee. For use with Eagle Butt Welding Kit.

Features

  • For use with Eagle Butt Welding Kit
  • Suitable for use with Eagle belting up to and including 8mm round
  • Suitable for use with Eagle belting A section Vee
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 1.5 x 4.65 x 6.42 inches (3.8 x 11.8 x 16.3 cm)

First Available: 2017-03-12

Amazon Price: $151.53 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 3 to 5 days
List Price: $151.53

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

PowerTwist Plus V-Belt, C Profile, 7/8" Width, 25ft Length

Model: 0405070   |    Mpn: 0405070   |    Ean: 0662345003261   |    PartNumber: 0405070   |   Asin: B0025QGI4O

C profile PowerTwist Plus V-Belts are a great alternative to conventional endless wrapped rubber V-belts of classical cross sections. Combining industry standard horsepower ratings with superior performance in harsh operating environments, PowerTwist Plus is a permanent replacement for traditional rubber V-belts. PowerTwist Plus unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys as PowerTwist Plus V-Belts run in industry standard pulley grooves. Save money by reducing V-belt inventory PowerTwist Plus V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Plus in the two most common cross sections, A/ 4L and B/5L, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Plus has an operating temperature range of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to 3L, A/4L, B/5L, and C drives, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Ultra-high grip top with an extremely pliable surface pattern.
  • SuperGrip Top surface will not to delaminate.
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.
  • Reduced spare V-belt Inventory; numerous belt lengths from just one box..
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 3.9 x 10.5 x 10.7 inches (9.9 x 26.7 x 27.2 cm)

First Available: 2017-05-15

Amazon Price: $490.20 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 3 to 5 days
List Price: $516.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

PowerTwist Plus Antistatic V-Belt, A / 4L Profile, 1/2" Width, 25ft Length

 Ean: 0662345078245   |    PartNumber: 0408505   |   Asin: B00CLG3AIU

PowerTwist Plus Antistatic has the best antistatic properties of any V-belt on the market, easily meeting the ISO 1813:1998 standard. While the standard allows the resistance of the drive belt to be as high as 3.6 mega ohms (3,600,000 ohms), PowerTwist Plus Antistatic typically registers well below 50 ohms, while even the best so called antistatic rubber belts usually measure between a shocking 10,000 200,000 ohms. And unlike antistatic rubber V-belts whose antistatic properties may be adversely affected by humidity levels, environmental conditions and wear, the proprietary construction of PowerTwist Plus Antistatic allows the belt to maintain antistatic properties in even the harshest conditions. PowerTwist Plus Antistatic unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys as PowerTwist Plus Antistatic V-Belts run in industry standard pulley grooves. PowerTwist Plus Antistatic is also ideal for conveying applications that frequently have issues with static electricity, such as glass and solar cell manufacturing. Save money by reducing V-belt inventory PowerTwist Plus Antistatic V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Plus Antistatic in the two most common cross sections, A/ 4L and B/5L, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts and maintain their antistatic properties in harsh environments handling abrasion, extreme temperatures, and exposure to humidity, oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Plus Antistatic has an operating temperature range, with no loss of performance, of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to A/4L and B/5L drives, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job. Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Drop-in replacement for traditional V-belts; same horsepower ratings as classical rubber V-belts.
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.
  • Reduced spare V-belt Inventory; numerous belt lengths from just one box.
  • Longer belt life then rubber V-belts. Reduced vibration means less noise and increased component life
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 3.9 x 10.5 x 10.8 inches (9.9 x 26.7 x 27.4 cm)

Amazon Price: $280.88 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 1 to 2 days
List Price: $309.51

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 100ft Length

Model: 0408010   |    Mpn: 0408010   |    Ean: 0662345003728   |    PartNumber: 0408010   |   Asin: B00CLG3GTI

3L PowerTwist Plus V-Belts are a great alternative to conventional endless wrapped rubber V-belts of classical cross sections. Combining industry standard horsepower ratings with superior performance in harsh operating environments, PowerTwist Plus is a permanent replacement for traditional rubber V-belts. PowerTwist Plus unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys as PowerTwist Plus V-Belts run in industry standard pulley grooves. Save money by reducing V-belt inventory PowerTwist Plus V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Plus in the two most common cross sections, A/ 4L and B/5L, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Plus has an operating temperature range of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to 3L, A/4L, B/5L, and C drives, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Durable 70A Polyurethane SuperGrip Top provides superior traction for tough applications.
  • SuperGrip Top surface will not to delaminate.
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.
  • Reduced spare V-belt Inventory; numerous belt lengths from just one box..
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 4 x 10.3 x 10.8 inches (10.2 x 26.2 x 27.4 cm)

First Available: 2017-03-12

Amazon Price: $819.99 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $819.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

PowerTwist Ground Round, 5/16" Diamater Round Belt, 25ft Length

 Ean: 0662345001359   |    PartNumber: 04051050   |   Asin: B00CLG34WC

Stuck with ancient round leather belts? Frustrated with round rubber? Or tired of welding urethane? PowerTwist Ground Round is the effortless upgrade. With a round profile, this PowerTwist Plus based belt will drop right into your existing equipment using 5/16" diameter belts. Its extreme flexibility makes it ideally suited for use with the small pulley/idler diameters often found in these systems. PowerTwist Ground Round virtually eliminates conveyor system downtime. PowerTwist Ground Round unique quick connect belt design provides for fast and easy installation without moving idler pulleys and dismantling drive systems no tools needed. Keep a box on hand of the diameters you need and you ll have instant on-site availability 24/7. Made from the same custom polyester/polyurethane composite material as PowerTwist Plus V-Belts, PowerTwist Ground Round is built tough. If zero power curve downtime sounds good to you, you re ready for PowerTwist Ground Round. Save money by reducing belt inventory PowerTwist Ground Round let you safely reduce your round belt inventory while ensuring you always have the belt you need, on hand. Stock a box PowerTwist Ground Round in the diameters you need and you ll reduce the inventory dollars you have tied up in replacement while maintaining on-site belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional belts, in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Ground Round has an operating temperature range, with no loss of performance, of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job. Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. Ground Round and the color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Drop-in replacement for traditional V-belts; same horsepower ratings as classical rubber V-belts.
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.
  • Reduced spare V-belt Inventory; numerous belt lengths from just one box.
  • Longer belt life then rubber V-belts. Reduced vibration means less noise and increased component life
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 4 x 10.4 x 10.8 inches (10.2 x 26.4 x 27.4 cm)

Amazon Price: $319.81 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 3-5 weeks
List Price: $319.81

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

PowerTwist Hex Double V-Belt, AA Profile, Dual-Sided, 1/2" Width, 25ft Length

Model: 0405230   |    Mpn: 0405230   |    Ean: 0662345003469   |    PartNumber: 0405230   |   Asin: B00CLG2DYC

The AA profile PowerTwist Double-V dual sided belts are a great alternative to conventional endless wrapped rubber Hex V-belts. With a V profile on both sides, PowerTwist Double-V is designed to replace double V rubber belts in serpentine drives, where power needs to be transmitted by both sides of the belt. This belt is also suited for use in conveying applications where a lower contact area between the belt and the conveyed item is desired. Combining industry standard horsepower ratings with superior performance in harsh operating environments, PowerTwist Double-V is a permanent replacement for traditional rubber Hex Double V-belts. PowerTwist Double-V unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds. No need to dismantle drive components or change existing pulleys as PowerTwist Double-V Hex V-Belts run in industry standard pulley grooves. Save money by reducing V-belt inventory PowerTwist Double-V V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Double-V in the two most common cross sections, AA and BB, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Double-V has an operating temperature range, with no loss of performance, of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. These belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Drop-in replacement on virtually any system currently using round leather, rubber or polyurethane belts
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.
  • Reduced spare V-belt Inventory; numerous belt lengths from just one box.
  • Longer belt life then rubber V-belts. Reduced vibration means less noise and increased component life
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 4 x 10.3 x 10.7 inches (10.2 x 26.2 x 27.2 cm)

Amazon Price: $283.92 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 24 hours
List Price: $304.04

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 100ft Length

 Ean: 0662345003353   |    PartNumber: 0408050   |   Asin: B00CLG3JVI

B / 5L PowerTwist Plus V-Belts are a great alternative to conventional endless wrapped rubber V-belts of classical cross sections. Combining industry standard horsepower ratings with superior performance in harsh operating environments, PowerTwist Plus is a permanent replacement for traditional rubber V-belts. PowerTwist Plus unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys as PowerTwist Plus V-Belts run in industry standard pulley grooves. Save money by reducing V-belt inventory PowerTwist Plus V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Plus in the two most common cross sections, A/ 4L and B/5L, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Plus has an operating temperature range of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to 3L, A/4L, B/5L, and C drives, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Ultra-high grip top with an extremely pliable surface pattern.
  • SuperGrip Top surface will not to delaminate.
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.
  • Reduced spare V-belt Inventory; numerous belt lengths from just one box..
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 4.4 x 16.3 x 16.6 inches (11.2 x 41.4 x 42.2 cm)

Amazon Price: $990.13 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 3 to 5 days
List Price: $1,330.81

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

PowerTwist Ground Round, 3/8" Diamater Round Belt, 25ft Length

Model: 04051060   |    Mpn: 04051060   |    Ean: 0662345000758   |    PartNumber: 04051060   |   Asin: B00CLG31F2

Stuck with ancient round leather belts? Frustrated with round rubber? Or tired of welding urethane? PowerTwist Ground Round is the effortless upgrade. With a round profile, this PowerTwist Plus based belt will drop right into your existing equipment using 3/8" diameter belts. Its extreme flexibility makes it ideally suited for use with the small pulley/idler diameters often found in these systems. PowerTwist Ground Round virtually eliminates conveyor system downtime. PowerTwist Ground Round unique quick connect belt design provides for fast and easy installation without moving idler pulleys and dismantling drive systems no tools needed. Keep a box on hand of the diameters you need and you ll have instant on-site availability 24/7. Made from the same custom polyester/polyurethane composite material as PowerTwist Plus V-Belts, PowerTwist Ground Round is built tough. If zero power curve downtime sounds good to you, you re ready for PowerTwist Ground Round. Save money by reducing belt inventory PowerTwist Ground Round let you safely reduce your round belt inventory while ensuring you always have the belt you need, on hand. Stock a box PowerTwist Ground Round in the diameters you need and you ll reduce the inventory dollars you have tied up in replacement while maintaining on-site belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional belts, in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Ground Round has an operating temperature range, with no loss of performance, of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job. Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. Ground Round and the color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Ultralow resistance antistatic V-belt. 100% ISO 1813:1998 inspected and certified by Fenner Drives
  • Antistatic properties unaffected by humidity levels
  • Drop-in replacement for traditional V-belts; same horsepower ratings as classical rubber V-belts.
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.. Reduced spare V-belt Inventory; numerous belt lengths from just one box.
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 4.1 x 10.4 x 10.9 inches (10.4 x 26.4 x 27.7 cm)

Amazon Price: $259.92 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 1 to 2 days
List Price: $299.16

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

PowerTwist Plus V-Belt, A / 4L Profile, 1/2" Width, 100ft Length

Model: 0408030   |    Mpn: 0408030   |    Ean: 0662345003490   |    PartNumber: 0408030   |   Asin: B00CLG3IJG

A / 4L PowerTwist Plus V-Belts are a great alternative to conventional endless wrapped rubber V-belts of classical cross sections. Combining industry standard horsepower ratings with superior performance in harsh operating environments, PowerTwist Plus is a permanent replacement for traditional rubber V-belts. PowerTwist Plus unique quick connect belt design provides for fast and easy installation, even on captured or restricted access drives no tools required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle chain. No need to dismantle drive components or change existing pulleys as PowerTwist Plus V-Belts run in industry standard pulley grooves. Save money by reducing V-belt inventory PowerTwist Plus V-belts let you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. Stock a box each of PowerTwist Plus in the two most common cross sections, A/ 4L and B/5L, and you ll reduce the inventory dollars you have tied up in replacement V-belts and be nearly 100% covered with on-site V-belt availability. There s also no shelf life concern, making dry rot a thing of the past. Longer belt life High performance polyurethane/polyester composite materials outperform conventional rubber V-belts in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Plus has an operating temperature range of -40 F to +240 F. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to 3L, A/4L, B/5L, and C drives, these belts can be installed on existing pulleys with no changes in set-up. Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive components. A permanent replacement belt fit it and move on to the next job Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Permanent V-belt replacement
  • Durable 70A Polyurethane SuperGrip Top provides superior traction for tough applications.
  • SuperGrip Top surface will not to delaminate.
  • Easier faster installation. Make to required length and roll it on. No wasted time dismantling drive components.
  • Reduced spare V-belt Inventory; numerous belt lengths from just one box..
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 2.6 x 16.4 x 16.5 inches (6.6 x 41.7 x 41.9 cm)

Amazon Price: $1,353.00 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 3 to 5 days
List Price: $1,353.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Fenner Drives 5700325 Metal Z Block Heating Tip, 2.63" Width

Model: 02887179   |    Mpn: 5700325   |    Ean: 0662345004268   |    PartNumber: 5700325   |   Asin: B01AC4ROLG

Z block heating tip for heating element in Overlap Welding Kit.

Features

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 1.75 x 2 x 2.25 inches (4.4 x 5.1 x 5.7 cm)

Amazon Price: $120.49 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 3 to 5 days
List Price: $130.63

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Morse SA 1/2-24 Steel Silent Chain, Inverted Tooth, 2" Width, 1/2" Pitch

Model: MOR SA 1/2 24 CHAIN   |    Mpn: SA 1/2-24   |    PartNumber: SA 1/2-24   |   Asin: B00UZ3Q7W2

Silent chain is an inverted tooth chain offering low to moderate horsepower for applications. The exclusive rocker joint eliminates friction during chain articulation permitting high rotative speed with less wear and heat.

Features

  • Easy assembly
  • No lubrication
  • Corrosion resistant
  • Temperature range -250 to 150 Fahrenheit
  • Low cost maintenance
  • See more on Amazon...

Brand: Morse   |   Manufacturer: Morse

Package Dimensions: 2.3 x 3.3 x 3.8 inches (5.8 x 8.4 x 9.7 cm)

Amazon Price: $46.15 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 24 hours
List Price: $46.54

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

PowerTwist SuperGrip Top Polyurethane, C Profile, 7/8" Width, 100ft Length

 Ean: 0662345119719   |    PartNumber: 0440101   |   Asin: B00CLG3W60

PowerTwist SuperGrip Top (SGT) PU (polyurethane) is designed specifically for conveying applications requiring a high wearing grip top surface, such as brick, concrete blocks and tile manufacturing. With a 70A polyurethane SuperGrip Top surface and a high load carrying capacity, PowerTwist SGT PU will stand up to the rigors of conveying in the most abrasive environments while providing the benefits of our PowerTwist Plus V-belts. If even higher grip is required, we recommend PowerTwist SuperGrip Top PVC. The PowerTwist base has a unique quick connect belt design providing a fast and easy installation, even on captured or restricted access drives no tools or welding required. Belts are made up to the required length, by hand, in seconds and can be rolled onto a drive just like a bicycle. No need to dismantle drive components or change existing pulleys as PowerTwist SuperGrip Top PU runs in industry standard pulley grooves. Durable Our Polyurethane SuperGrip Top is the toughest and most durable SuperGrip Top in our product line up. And Fenner Drives proprietary adhesive free bonding technology is used on all our SuperGrip Top products ensuring that you ll never have to worry about delaminated belts. Save money by reducing V-belt inventory PowerTwist SGT PU lets you safely reduce your V-belt inventory while ensuring you always have the belt you need, on hand. There s also no shelf life concern, making dry rot a thing of the past. Easier, faster installation Quickly adjustable by hand to any necessary length. Perfectly suited to A, B, and C drives, these belts can be installed on existing pulleys with no changes in set-up. Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

  • Integrally bonded top cannot delaminate
  • Make to length by hand, without tools
  • No curing time
  • Extremely high strength and excellent performance in harsh environments
  • See more on Amazon...

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 13.2 x 16.4 x 16.4 inches (33.5 x 41.7 x 41.7 cm)

Amazon Price: $790.00 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 24 hours
List Price: $790.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

PowerTwist Roller Drive, B Profile, 9/16" Round replacement, 100ft Length

 Ean: 0662345035156   |    PartNumber: 0410300   |   Asin: B00CLG3RR4

Quickly and permanently replace endless rubber belts on belt-driven live roller conveyor systems. PowerTwist Roller Drive is a drop-in replacement for B section V-belts on any live roller conveyor or 9/16 round profile belts on Rapistan Conveyor Systems (Siemens Rapistan, Dematic). PowerTwist Roller Drive is a true drop-in replacement on V-belt driven live roller conveyors with the same ride height as B section endless V-belts. Installation is fast and easy without any need to adjust idler/roller clearances and without the need to dismantle head and tail drive components. Just fish it through your drive system and connect links to make endless. PowerTwist Roller Drive virtually eliminates conveyor system downtime. PowerTwist Roller Drive unique quick connect belt design provides for fast and easy installation no tools needed. Keep a box of PowerTwist Roller Drive on hand and you ll have instant on-site availability 24/7. Save money by reducing belt inventory PowerTwist Roller Drive let you safely reduce your belt inventory while ensuring you always have the belt you need, on hand. Stock a box PowerTwist Roller Drive in the profile you need and you ll reduce the inventory dollars you have tied up in replacement while maintaining on-site belt availability. There s also no shelf life concern, making dry rot a thing of the past. Easier, faster installation Quickly adjustable by hand to any necessary length, these belts can be installed on existing pulleys with no changes in set-up. Minimized maintenance time To re-tension, just roll the belt off, take out a link and roll it back on; no need to move any drive or conveyor components. A permanent replacement belt fit it and move on to the next job Reduce drive vibration. Conventional rubber V-belts have a continuous tension cord that carries vibration like a guitar string. This vibration can cause noise and lead to reduced component life. PowerTwist Plus reduces this vibration by 50% thanks to the segmented twist-lock design which acts as a vibration dampener from link to link. Longer belt life High performance polyurethane/polyester composite materials outperform conventional belts, in harsh environments handling abrasion, extreme temperatures, and exposure to oil, grease, water and most common industrial and agricultural chemicals and solvents. High heat is not a problem PowerTwist Roller Drive has an operating temperature range, with no loss of performance, of -40 F to +240 F. Legal Disclaimer PowerTwist and PowerTwist Plus are registered in the U.S. Patent and Trademark Office as trademarks Fenner U.S., Inc. The color red for link V-belts is registered in the U.S. Patent and Trademark Office as a trademark of Fenner, Inc.

Features

Brand: Fenner Drives   |   Manufacturer: Fenner Drives

Package Dimensions: 6.3 x 16.4 x 16.6 inches (16.0 x 41.7 x 42.2 cm)

Amazon Price: $255.11 | as of 01/18/2019(11:42am pst)
Availibility: Usually ships in 24 hours
List Price: $255.11

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 6ft Length
  2. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 5ft Length
  3. PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 25ft Length
  4. PowerTwist Plus V-Belt, A / 4L Profile, 1/2" Width, 25ft Length
  5. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 25ft Length
  6. Fenner Drives 5700227 Metal Mini Butt Welding Clamp, 2" Width
  7. PowerTwist Plus V-Belt, C Profile, 7/8" Width, 25ft Length
  8. PowerTwist Plus Antistatic V-Belt, A / 4L Profile, 1/2" Width, 25ft Length
  9. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 100ft Length
  10. PowerTwist Ground Round, 5/16" Diamater Round Belt, 25ft Length

Most Wished For

  1. PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 6ft Length
  2. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 5ft Length
  3. PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 25ft Length
  4. PowerTwist Plus V-Belt, A / 4L Profile, 1/2" Width, 25ft Length
  5. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 25ft Length
  6. Fenner Drives 5700227 Metal Mini Butt Welding Clamp, 2" Width
  7. PowerTwist Plus V-Belt, C Profile, 7/8" Width, 25ft Length
  8. PowerTwist Plus Antistatic V-Belt, A / 4L Profile, 1/2" Width, 25ft Length
  9. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 100ft Length
  10. PowerTwist Ground Round, 5/16" Diamater Round Belt, 25ft Length

Most Gifted

  1. PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 6ft Length
  2. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 5ft Length
  3. PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 25ft Length
  4. PowerTwist Plus V-Belt, A / 4L Profile, 1/2" Width, 25ft Length
  5. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 25ft Length
  6. Fenner Drives 5700227 Metal Mini Butt Welding Clamp, 2" Width
  7. PowerTwist Plus V-Belt, C Profile, 7/8" Width, 25ft Length
  8. PowerTwist Plus Antistatic V-Belt, A / 4L Profile, 1/2" Width, 25ft Length
  9. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 100ft Length
  10. PowerTwist Ground Round, 5/16" Diamater Round Belt, 25ft Length

Top Selling

  1. PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 6ft Length
  2. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 5ft Length
  3. PowerTwist Plus V-Belt, B / 5L Profile, 5/8" Width, 25ft Length
  4. PowerTwist Plus V-Belt, A / 4L Profile, 1/2" Width, 25ft Length
  5. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 25ft Length
  6. Fenner Drives 5700227 Metal Mini Butt Welding Clamp, 2" Width
  7. PowerTwist Plus V-Belt, C Profile, 7/8" Width, 25ft Length
  8. PowerTwist Plus Antistatic V-Belt, A / 4L Profile, 1/2" Width, 25ft Length
  9. PowerTwist Plus V-Belt, 3L Profile, 3/8" Width, 100ft Length
  10. PowerTwist Ground Round, 5/16" Diamater Round Belt, 25ft Length



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.