Frontpage > Industrial > Power Transmission > Take Up Block Bearings

Best Take up Block Bearings - Buying Guide

Last Updated: 11/13/2019

Share on

Bestselling Take up Block Bearings on Amazon

  1. Peer Bearing UCT205-16-17/32 Cast Iron Take Up Unit, Wide Inner Ring, Relubricable, Set Screw Lockin...
  2. Sealmaster ST-20 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast...
  3. Browning VTWS-224 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  4. 1" Take-up Ball Bearing Unit UCT205-16
  5. Sealmaster ST-16T Take-Up Unit, Standard Duty, Regreasable, Skwezloc Collar, Felt Seals, Cast Iron H...
  6. Browning VTWS-216 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  7. Browning VTWS-223 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  8. Browning 12SF31 Center Pull Take-Up Frame, 4 Bolt, Inch, 12" Travel, 20" Length, 5-1/16" Width, 3-1/...
  9. Hub City IndustriaLine 1004-03115 TU250X1-1/2 Take Up Unit, 1.5" ID, 3" Height, 8" Length, 8" Width
  10. Sealmaster ST-35 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast...

  #1

Peer Bearing UCT205-16-17/32 Cast Iron Take Up Unit, Wide Inner Ring, Relubricable, Set Screw Locking Collar, Single Lip Seal, 1" Bore, 17/32" Slot Width

Model: PER UCT205-16-17/32   |    Mpn: UCT205-16-17/32   |    Ean: 8865590342426   |    PartNumber: UCT205-16-17/32   |   Asin: B00U17YEZE

UC bearing mounted in a take up unit.

Features

  • Standard duty, high grade cast iron bearing
  • Unit has an anti-rotation pin
  • Housing No. T-205-H
  • See more on Amazon...

Brand: Peer Bearing   |   Manufacturer: Peer Bearing

Package Dimensions: 2.3 x 4.2 x 4.6 inches (5.8 x 10.7 x 11.7 cm)

Amazon Price: $53.52 | as of 11/13/2019(11:51pm pst)
Availibility: Usually ships in 1 to 2 days
List Price: $61.86

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Sealmaster ST-20 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-1/4" Bore, 17/32" Slot Width, 3-1/2" Between Frames

Model: ST-20   |    Mpn: ST-20   |    Ean: 0662461006160   |    PartNumber: ST-20   |   Asin: B008FFE83M

This Sealmaster ST Series take-up unit has a setscrew locking collar and felt seals, and is suitable for use in a take-up frame to adjust guided shaft position, such as in adjusting belt tension for a conveyor. The one-piece cast iron take-up unit housing has slotted sides that fit into a take-up frame to allow movement within the frame. This bearing insert is made from ASTM International 52100 high carbon steel and its rings are coated with black oxide for corrosion resistance. The bearing insert has a heat treated inner race for wear resistance and an outer race with a brass land riding retainer that spaces the ball bearings for even load distribution and prevents contact to reduce friction, vibration, and noise. A collar extends from the bearing inner ring and setscrews lock the collar and bearing onto the shaft. This regreasable non-expansion-type bearing allows self-realignment and compensates for static and dynamic alignment errors, has an operating temperature range of -20 to 220 degrees F, and has low friction felt and flinger seals to retain lubricant and protect against contamination that would shorten the bearing life. This take-up unit is suitable for use in material handling applications, such as in belt conveyors.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Slotted sides in take-up unit for shaft adjustment or belt tightening in conveyor applications
  • High carbon steel rings with protective coating for corrosion resistance
  • Land riding retainer spaces ball bearings for even load distribution and reduced friction, vibration, and noise
  • Setscrew locking collar for secure attachment to shaft
  • Felt and flinger seals to protect against contaminants and retain lubrication
  • See more on Amazon...

Brand: Sealmaster   |   Manufacturer: Regal

Item Dimensions: 6 x 8 x 12 inches (15.2 x 20.3 x 30.5 cm)   |   Package Dimensions: 1.9 x 4.6 x 7.2 inches (4.8 x 11.7 x 18.3 cm)

Amazon Price: $135.33 | as of 11/13/2019(11:51pm pst)
Availibility: Usually ships in 4-5 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Browning VTWS-224 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and Flinger Seal, Cast Iron, Inch, 1-1/2" Bore, 11/16" Slot Width, 4" Frame Width

 Ean: 0662289528530   |    PartNumber: VTWS-224   |   Asin: B007PV3WU2

This Browning VTWS 200 series ball bearing take-up unit with a set screw lock, cast iron housing, and contact and flinger seals is designed for use with take-up frames in applications that require adjusting shafts or belt tension, such as conveyor systems. The one-piece housing is made of cast iron for rigidity and vibration damping, has a semi-solid base to provide mounting stability, and slotted sides that fit into a take-up frame to allow movement within the frame. The standard-duty, deep-groove ball bearing insert in the housing is made of 52100 chromium steel supports average radial loads and combination radial and thrust loads. For increased shaft support and holding power, the bearing has an extended inner ring and a zone-hardened inner race. A rivet on the outer ring prevents rotation of the ring in the housing, reducing heat buildup and prolonging the bearing life. This self-aligning bearing has a spherical outer surface that compensates for misalignments, and honed races for quiet operation. The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low- to moderate-speed applications where the shaft rotates in a single or reversing direction. Single lip contact seals on both sides of the bearing help retain lubricant applied at manufacture and prevent contamination. For added protection, flingers on the inner ring deflect contaminants away from the seals. A nylon retainer spaces the ball rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. This bearing has a grease fitting on the outer surface for reapplying lubricant. Operating temperatures for this bearing range from -20 to +200 degrees F. This wide-slot take-up bearing unit is suitable for applications including conveyors, food processing equipment, and agricultural equipment, among others.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Browning Bearings manufactures V-belt drives, gearing, bearings, and other power transmission components. The company, founded in 1886, is headquartered in Maysville, KY.

Features

  • Cast iron wide-slot take-up unit for use with take-up frames in applications requiring shaft or belt adjustments
  • Standard-duty ball bearing insert supports radial or combination radial and thrust loads
  • Single lip contact seals help retain lubricant and prevent contamination and flingers provide extra sealing protection
  • Set screw lock for a three-point contact hold on the shaft
  • Nylon retainer spaces balls to help distribute the load and minimize friction, vibration, and noise
  • See more on Amazon...

Brand: Browning   |   Manufacturer: Regal

Package Dimensions: 2.3 x 4.8 x 7.5 inches (5.8 x 12.2 x 19.1 cm)

Amazon Price: $101.72 | as of 11/13/2019(11:51pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $121.01

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

1" Take-up Ball Bearing Unit UCT205-16

Model: UCT   |    Mpn: UCT205-16   |    Ean: 0711662662528   |    PartNumber: UCT205-16   |   Asin: B073TMQZ8B

1" Take-up Ball Bearing Unit UCT205-16

Features

  • Take-up Ball Bearing Unit
  • Reduce Friction and Heat,Uniforn Force,Life time Lubrication,100% Noice Test
  • OEM Replacement Bearings
  • See more on Amazon...

Brand: ZSKL   |   Manufacturer: All World Bearings

Amazon Price: $19.29 | as of 11/13/2019(11:51pm pst)
Availibility: Usually ships in 1-2 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Sealmaster ST-16T Take-Up Unit, Standard Duty, Regreasable, Skwezloc Collar, Felt Seals, Cast Iron Housing, 1" Bore, 17/32" Slot Width, 3" Between Frames

 Ean: 0662461074572   |    PartNumber: ST-16T   |   Asin: B008FFHFFK

This Sealmaster ST Series take-up unit has a Skwezloc concentric locking collar and felt seals, and is suitable for use in a take-up frame to adjust guided shaft position, such as in adjusting belt tension for a conveyor. The one-piece cast iron take-up unit housing has slotted sides that fit into a take-up frame to allow movement within the frame. This bearing insert is made from ASTM International 52100 high carbon steel and its rings are coated with black oxide for corrosion resistance. The bearing insert has a heat treated inner race for wear resistance and an outer race with a brass land riding retainer that spaces the ball bearings for even load distribution and prevents contact to reduce friction, vibration, and noise. A collar extends from the bearing inner ring and a Skwezloc concentric locking collar clamps the slotted collar and bearing onto the shaft. This regreasable non-expansion-type bearing allows self-realignment and compensates for static and dynamic alignment errors, has an operating temperature range of -20 to 220 degrees F, and has low friction felt and flinger seals to retain lubricant and protect against contamination that would shorten the bearing life. This take-up unit is suitable for use in material handling applications, such as in belt conveyors.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Slotted sides in take-up unit frame for shaft adjustment or belt tightening in conveyor applications
  • High carbon steel rings with protective coating for corrosion resistance
  • Land riding retainer spaces ball bearings for even load distribution and reduced friction, vibration, and noise
  • Skwezloc concentric locking collar for secure attachment to shaft
  • Felt and flinger seals to protect against contaminants and retain lubrication
  • See more on Amazon...

Brand: Sealmaster   |   Manufacturer: Regal

Package Dimensions: 1.7 x 4.7 x 4.9 inches (4.3 x 11.9 x 12.4 cm)

Amazon Price: $145.18 | as of 11/13/2019(11:51pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Browning VTWS-216 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and Flinger Seal, Cast Iron, Inch, 1" Bore, 17/32" Slot Width, 3" Frame Width

 Ean: 0662289528431   |    PartNumber: VTWS-216   |   Asin: B007PV3W8Y

This Browning VTWS 200 series ball bearing take-up unit with a set screw lock, cast iron housing, and contact and flinger seals is designed for use with take-up frames in applications that require adjusting shafts or belt tension, such as conveyor systems. The one-piece housing is made of cast iron for rigidity and vibration damping, has a semi-solid base to provide mounting stability, and slotted sides that fit into a take-up frame to allow movement within the frame. The standard-duty, deep-groove ball bearing insert in the housing is made of 52100 chromium steel supports average radial loads and combination radial and thrust loads. For increased shaft support and holding power, the bearing has an extended inner ring and a zone-hardened inner race. A rivet on the outer ring prevents rotation of the ring in the housing, reducing heat buildup and prolonging the bearing life. This self-aligning bearing has a spherical outer surface that compensates for misalignments, and honed races for quiet operation. The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low- to moderate-speed applications where the shaft rotates in a single or reversing direction. Single lip contact seals on both sides of the bearing help retain lubricant applied at manufacture and prevent contamination. For added protection, flingers on the inner ring deflect contaminants away from the seals. A nylon retainer spaces the ball rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. This bearing has a grease fitting on the outer surface for reapplying lubricant. Operating temperatures for this bearing range from -20 to +200 degrees F. This wide-slot take-up bearing unit is suitable for applications including conveyors, food processing equipment, and agricultural equipment, among others.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Browning Bearings manufactures V-belt drives, gearing, bearings, and other power transmission components. The company, founded in 1886, is headquartered in Maysville, KY.

Features

  • Cast iron wide-slot take-up unit for use with take-up frames in applications requiring shaft or belt adjustments
  • Standard-duty ball bearing insert supports radial or combination radial and thrust loads
  • Single lip contact seals help retain lubricant and prevent contamination and flingers provide extra sealing protection
  • Set screw lock for a three-point contact hold on the shaft
  • Nylon retainer spaces balls to help distribute the load and minimize friction, vibration, and noise
  • See more on Amazon...

Brand: Browning   |   Manufacturer: Regal

Package Dimensions: 1.8 x 4.7 x 4.8 inches (4.6 x 11.9 x 12.2 cm)

Amazon Price: $78.16 | as of 11/13/2019(11:51pm pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $78.16 | Used Price: $20.24

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Browning VTWS-223 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and Flinger Seal, Cast Iron, Inch, 1-7/16" Bore, 17/32" Slot Width, 3-1/2" Frame Width

 Ean: 0662289528516   |    PartNumber: VTWS-223   |   Asin: B007PV40WQ

This Browning VTWS 200 series ball bearing take-up unit with a set screw lock, cast iron housing, and contact and flinger seals is designed for use with take-up frames in applications that require adjusting shafts or belt tension, such as conveyor systems. The one-piece housing is made of cast iron for rigidity and vibration damping, has a semi-solid base to provide mounting stability, and slotted sides that fit into a take-up frame to allow movement within the frame. The standard-duty, deep-groove ball bearing insert in the housing is made of 52100 chromium steel supports average radial loads and combination radial and thrust loads. For increased shaft support and holding power, the bearing has an extended inner ring and a zone-hardened inner race. A rivet on the outer ring prevents rotation of the ring in the housing, reducing heat buildup and prolonging the bearing life. This self-aligning bearing has a spherical outer surface that compensates for misalignments, and honed races for quiet operation. The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low- to moderate-speed applications where the shaft rotates in a single or reversing direction. Single lip contact seals on both sides of the bearing help retain lubricant applied at manufacture and prevent contamination. For added protection, flingers on the inner ring deflect contaminants away from the seals. A nylon retainer spaces the ball rollers for even load distribution and prevents contact to reduce friction, vibration, and noise. This bearing has a grease fitting on the outer surface for reapplying lubricant. Operating temperatures for this bearing range from -20 to +200 degrees F. This wide-slot take-up bearing unit is suitable for applications including conveyors, food processing equipment, and agricultural equipment, among others.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Browning Bearings manufactures V-belt drives, gearing, bearings, and other power transmission components. The company, founded in 1886, is headquartered in Maysville, KY.

Features

  • Cast iron wide-slot take-up unit for use with take-up frames in applications requiring shaft or belt adjustments
  • Standard-duty ball bearing insert supports radial or combination radial and thrust loads
  • Single lip contact seals help retain lubricant and prevent contamination and flingers provide extra sealing protection
  • Set screw lock for a three-point contact hold on the shaft
  • Nylon retainer spaces balls to help distribute the load and minimize friction, vibration, and noise
  • See more on Amazon...

Brand: Browning   |   Manufacturer: Regal

Package Dimensions: 2.1 x 4.6 x 7 inches (5.3 x 11.7 x 17.8 cm)

Amazon Price: $46.96 | as of 11/13/2019(11:51pm pst)
Availibility: Usually ships in 24 hours
List Price: $106.89

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Browning 12SF31 Center Pull Take-Up Frame, 4 Bolt, Inch, 12" Travel, 20" Length, 5-1/16" Width, 3-1/16" Bolt Hole Spacing Width

 Ean: 0662289532070   |    PartNumber: 12SF31   |   Asin: B007PV47FG

This Browning SF series center pull take-up frame with four bolt holes is suitable for use with take-up bearings (sold separately) to position shafts or tighten belts in conveyor applications. The frame is made of cast iron for structural rigidity and vibration damping and has four bolt holes for secure mounting to a conveyor system. A threaded rod and adjustment nut in the center of the frame positions the bearing along the frame and provides consistent conveyor belt tensioning. Side rails in the frame guide movement of the take-up bearing along the frame length. This standard duty take-up frame is suitable for applications including conveyors, food processing equipment, and agricultural equipment, among others.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Browning Bearings manufactures V-belt drives, gearing, bearings, and other power transmission components. The company, founded in 1886, is headquartered in Maysville, KY.

Features

  • Center-pull take-up frame mounts with take-up bearings for shaft positioning or belt tightening in conveyor applications
  • Four bolt holes provide secure side-mounting to conveyor systems
  • Cast iron for structural rigidity and vibration damping
  • Threaded adjustment rod and nut centered in the frame provides even tensioning and positions the bearing
  • Side rails guide movement of the slotted bearing in the frame
  • See more on Amazon...

Brand: Browning   |   Manufacturer: Regal

Package Dimensions: 2.9 x 5.5 x 20.5 inches (7.4 x 14.0 x 52.1 cm)

Amazon Price: $119.08 | as of 11/13/2019(11:51pm pst)
Availibility: Usually ships in 24 hours
List Price: $214.07

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Hub City IndustriaLine 1004-03115 TU250X1-1/2 Take Up Unit, 1.5" ID, 3" Height, 8" Length, 8" Width

Model: 1004-03115   |    Mpn: 1004-03115   |    Ean: 0662798258188   |    PartNumber: 1004-03115   |   Asin: B00TU49Q3Y

This Item is Relube type. Prelubricated at factory. Self-aligning replaceable bearing. Nitrile rubber seals with steel trash guard. Precision bored Cast Iron Housing.

Features

  • This Item can furnish modified or special units to suit customer requirements
  • Prelubricated at factory
  • Made in United States
  • See more on Amazon...

Brand: Hub City   |   Manufacturer: Hub city

Package Dimensions: 3.8 x 7.6 x 7.7 inches (9.7 x 19.3 x 19.6 cm)

Amazon Price: $109.37 | as of 11/13/2019(11:51pm pst)
Availibility: Usually ships in 4-5 business days
List Price: $147.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Sealmaster ST-35 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 2-3/16" Bore, 1-1/16" Slot Width, 5-1/8" Between Frames

 Ean: 0662461006313   |    PartNumber: ST-35   |   Asin: B008FFFAS4

This Sealmaster ST Series take-up unit has a setscrew locking collar and felt seals, and is suitable for use in a take-up frame to adjust guided shaft position, such as in adjusting belt tension for a conveyor. The one-piece cast iron take-up unit housing has slotted sides that fit into a take-up frame to allow movement within the frame. This bearing insert is made from ASTM International 52100 high carbon steel and its rings are coated with black oxide for corrosion resistance. The bearing insert has a heat treated inner race for wear resistance and an outer race with a brass land riding retainer that spaces the ball bearings for even load distribution and prevents contact to reduce friction, vibration, and noise. A collar extends from the bearing inner ring and setscrews lock the collar and bearing onto the shaft. This regreasable non-expansion-type bearing allows self-realignment and compensates for static and dynamic alignment errors, has an operating temperature range of -20 to 220 degrees F, and has low friction felt and flinger seals to retain lubricant and protect against contamination that would shorten the bearing life. This take-up unit is suitable for use in material handling applications, such as in belt conveyors.

Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers.

Sealmaster manufactures bearings and bearing accessories. The company, founded in 1938 and headquartered in Elsmere, KY, meets International Organization for Standardization (ISO) standard 9001.

Features

  • Slotted sides in take-up unit for shaft adjustment or belt tightening in conveyor applications
  • High carbon steel rings with protective coating for corrosion resistance
  • Land riding retainer spaces ball bearings for even load distribution and reduced friction, vibration, and noise
  • Setscrew locking collar for secure attachment to shaft
  • Felt and flinger seals to protect against contaminants and retain lubrication
  • See more on Amazon...

Brand: Sealmaster   |   Manufacturer: Regal

Package Dimensions: 2.6 x 7.1 x 8 inches (6.6 x 18.0 x 20.3 cm)

Amazon Price: $238.36 | as of 11/13/2019(11:51pm pst)
Availibility: Usually ships in 1-2 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

IPTCI BEARINGS UCTRS 20619 TAKE UP Unit 1-3/16IN, Narrow Slot Set Screw Lock

 PartNumber: UCTRS 20619   |   Asin: B0816W7WXR

Features

Brand: IPTCI BEARINGS   |   Manufacturer: IPTCI BEARINGS

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

BALDOR DODGE WSTU-IP-102R-1-1/8 Bearing IP Roller TAKE-UP Bearing 1 1/8IN BORE

 PartNumber: WSTU-IP-102R-1-1/8   |   Asin: B0816W58FR

Features

Brand: Baldor-Dodge   |   Manufacturer: ASEA BROWN BOVERI

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

BALDOR DODGE 461132 TAKE UP Bearing, WSTU-LT7-106, Steel

 PartNumber: 461132   |   Asin: B0816W3B1Y

Features

Brand: Baldor-Dodge   |   Manufacturer: ASEA BROWN BOVERI

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

HUB CITY TU200-5/8 Ball Bearing TAKE UP Unit 5/8IN

 PartNumber: TU200-5/8   |   Asin: B0816W1ZFP

Features

Brand: Hub City   |   Manufacturer: REGAL BELOIT

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

BALDOR DODGE WSTU-SC-103 Standard Ball Bearing, Wide Slot TAKE UP HOUSING

 PartNumber: WSTU-SC-103   |   Asin: B0816VX4XZ

Features

Brand: Baldor-Dodge   |   Manufacturer: ASEA BROWN BOVERI

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

BALDOR DODGE NSTU-SC-015 Standard Ball Bearings, Narrow Slot TAKE UP, CAST Iron

 PartNumber: NSTU-SC-015   |   Asin: B0816VWN4R

Features

Brand: Baldor-Dodge   |   Manufacturer: ASEA BROWN BOVERI

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

AMI BEARINGS UCST211-35 TAKE UP Ball Bearing 2-3/16IN

 PartNumber: UCST211-35   |   Asin: B0816VNN78

Features

Brand: AMI Bearings   |   Manufacturer: AMI BEARINGS

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Peer Bearing UCT205-16-17/32 Cast Iron Take Up Unit, Wide Inner Ring, Relubricable, Set Screw Lockin...
  2. Sealmaster ST-20 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast...
  3. Browning VTWS-224 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  4. 1" Take-up Ball Bearing Unit UCT205-16
  5. Sealmaster ST-16T Take-Up Unit, Standard Duty, Regreasable, Skwezloc Collar, Felt Seals, Cast Iron H...
  6. Browning VTWS-216 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  7. Browning VTWS-223 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  8. Browning 12SF31 Center Pull Take-Up Frame, 4 Bolt, Inch, 12" Travel, 20" Length, 5-1/16" Width, 3-1/...
  9. Hub City IndustriaLine 1004-03115 TU250X1-1/2 Take Up Unit, 1.5" ID, 3" Height, 8" Length, 8" Width
  10. Sealmaster ST-35 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast...

Most Wished For

  1. Peer Bearing UCT205-16-17/32 Cast Iron Take Up Unit, Wide Inner Ring, Relubricable, Set Screw Lockin...
  2. Sealmaster ST-20 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast...
  3. Browning VTWS-224 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  4. 1" Take-up Ball Bearing Unit UCT205-16
  5. Sealmaster ST-16T Take-Up Unit, Standard Duty, Regreasable, Skwezloc Collar, Felt Seals, Cast Iron H...
  6. Browning VTWS-216 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  7. Browning VTWS-223 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  8. Browning 12SF31 Center Pull Take-Up Frame, 4 Bolt, Inch, 12" Travel, 20" Length, 5-1/16" Width, 3-1/...
  9. Hub City IndustriaLine 1004-03115 TU250X1-1/2 Take Up Unit, 1.5" ID, 3" Height, 8" Length, 8" Width
  10. Sealmaster ST-35 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast...

Most Gifted

  1. Peer Bearing UCT205-16-17/32 Cast Iron Take Up Unit, Wide Inner Ring, Relubricable, Set Screw Lockin...
  2. Sealmaster ST-20 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast...
  3. Browning VTWS-224 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  4. 1" Take-up Ball Bearing Unit UCT205-16
  5. Sealmaster ST-16T Take-Up Unit, Standard Duty, Regreasable, Skwezloc Collar, Felt Seals, Cast Iron H...
  6. Browning VTWS-216 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  7. Browning VTWS-223 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  8. Browning 12SF31 Center Pull Take-Up Frame, 4 Bolt, Inch, 12" Travel, 20" Length, 5-1/16" Width, 3-1/...
  9. Hub City IndustriaLine 1004-03115 TU250X1-1/2 Take Up Unit, 1.5" ID, 3" Height, 8" Length, 8" Width
  10. Sealmaster ST-35 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast...

Top Selling

  1. Peer Bearing UCT205-16-17/32 Cast Iron Take Up Unit, Wide Inner Ring, Relubricable, Set Screw Lockin...
  2. Sealmaster ST-20 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast...
  3. Browning VTWS-224 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  4. 1" Take-up Ball Bearing Unit UCT205-16
  5. Sealmaster ST-16T Take-Up Unit, Standard Duty, Regreasable, Skwezloc Collar, Felt Seals, Cast Iron H...
  6. Browning VTWS-216 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  7. Browning VTWS-223 Ball Bearing Take-Up Unit, Setscrew Lock, Non-Expansion, Regreasable, Contact and ...
  8. Browning 12SF31 Center Pull Take-Up Frame, 4 Bolt, Inch, 12" Travel, 20" Length, 5-1/16" Width, 3-1/...
  9. Hub City IndustriaLine 1004-03115 TU250X1-1/2 Take Up Unit, 1.5" ID, 3" Height, 8" Length, 8" Width
  10. Sealmaster ST-35 Take-Up Unit, Standard Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.