Frontpage > Industrial > Power Transmission > Tapered Locking Bushings

Best Tapered Locking Bushings - Buying Guide

Last Updated: 01/15/2019

Share on

Bestselling Tapered Locking Bushings on Amazon

  1. TB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625" Bore, 1200 lbs/in Torque, Standar...
  2. Martin 2517 1 3/8 Taper Bushing, Sintered Steel, Inch, 1.38" Bore, 3.375" OD, 1.75" Length
  3. Browning 1615X 1 3/8 Taper Bore Bushing 1-3/8 Bore"
  4. Gates 1610 40MM Taper-Lock Bushing, 40mm Bore, 1.0" Length, 1.6" Max Bore
  5. Gates 2012 40MM Taper-Lock Bushing, 40mm Bore, 1.2" Length, 2.0" Max Bore
  6. Browning 2517X 2 7/16 Taper Bore Bushing 2-7/16 Bore"
  7. Martin 2012 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5" Bore, 2.75" OD, 1.25" Length
  8. Martin 1615 1 Taper Bushing, Sintered Steel, Inch, 1" Bore, 2.25" OD, 1.5" Length
  9. Martin 1615 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 57.15 mm OD, 38.1 mm Length
  10. Martin 1215 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 47.62 mm OD, 38.1 mm Length

  #1

TB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625" Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

 Ean: 0698672105101   |    PartNumber: TL110858   |   Asin: B004LDKDT0

This TB Woods 1108 taper lock bushing with a torque capacity of 1,200 in-lbs is made of cast iron and is used for mounting a taper lock bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of cast iron for resistance to wear, galling, and corrosion. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with taper lock bushings from various manufacturers. This taper lock bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

TB Wood's manufactures bushings, pulleys, couplings, and electronic motor controls. The company, founded in 1857 and headquartered in Chambersburg, PA, meets International Organization for Standardization (ISO) standard 9001:2008.

Features

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Cast iron for resistance to wear, galling, and corrosion
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with taper lock bushings from various manufacturers
  • See more on Amazon...

Brand: TB Woods   |   Manufacturer: TB Woods

Package Dimensions: 0.9 x 2 x 2 inches (2.3 x 5.1 x 5.1 cm)

Amazon Price: $20.23 | as of 01/15/2019(6:21pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Martin 2517 1 3/8 Taper Bushing, Sintered Steel, Inch, 1.38" Bore, 3.375" OD, 1.75" Length

 Ean: 0697950034614   |    PartNumber: 2517 1 3/8   |   Asin: B004BKIT5I

This Martin 2517 taper bushing is made of sintered steel and is used for mounting a taper bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of sintered powder steel for greater strength and wear resistance than plain carbon steel. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with taper bushings from various manufacturers. This taper bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

Martin Sprocket & Gear manufactures power transmission and conveying products. The company, founded in 1951 and headquartered in Arlington, TX, provides tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut f r Normung (DIN) standards.

Features

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Sintered steel for greater strength and resistance to wear than steel
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with taper bushings from various manufacturers
  • See more on Amazon...

Brand: Martin   |   Manufacturer: MARTIN

Item Dimensions: 18 x 16 x 23 inches (45.7 x 40.6 x 58.4 cm)   |   Package Dimensions: 2 x 3.5 x 3.7 inches (5.1 x 8.9 x 9.4 cm)

Amazon Price: $25.65 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $33.73

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Browning 1615X 1 3/8 Taper Bore Bushing 1-3/8 Bore"

 Ean: 0662289612819   |    PartNumber: 1615X 1 3/8   |   Asin: B005JMM62E

Size # 1615X 1 3/8 Taper Bore Bushing 1-3/8 Bore"

Features

  • No flange projection for close applications
  • Sizes available: 1008, 1108, 1210,1215,1310, 1610, 1615, 2012, 2517, 2525, 3020, 3030, 3535, 4040, 4545, 5050, 6050, 7060, 8065
  • Do not lubricate bushing or shaft
  • To install, match the hole pattern not threaded holes
  • See more on Amazon...

Brand: Browning   |   Manufacturer: Regal

Package Dimensions: 2.2 x 3.1 x 3.2 inches (5.6 x 7.9 x 8.1 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Gates 1610 40MM Taper-Lock Bushing, 40mm Bore, 1.0" Length, 1.6" Max Bore

 Ean: 0072053111897   |    PartNumber: 1610 40MM   |   Asin: B00CJI2FZE

This Gates Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation and have metric dimensions. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets and pulleys (not included) are available in a variety of outside diameters to fit this Taper-Lock bushing, allowing the precise selection of the number of drive teeth or grooves. This bushing is suitable for use in a wide range of mechanical and electronic adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO.

What's in the Box? Taper-Lock bushing Mounting hardware

Features

  • For use with Taper-Lock sheaves, sprockets and pulleys (not included)
  • Carbon steel for strength and resistance to wear
  • Allows precise selection of number of drive teeth or grooves in adjustable speed applications
  • Mounting hardware included
  • Metric sizes
  • See more on Amazon...

Brand: Gates   |   Manufacturer: Gates

Package Dimensions: 1 x 2.4 x 2.7 inches (2.5 x 6.1 x 6.9 cm)

Amazon Price: $20.26 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $21.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Gates 2012 40MM Taper-Lock Bushing, 40mm Bore, 1.2" Length, 2.0" Max Bore

 Ean: 0072053112009   |    PartNumber: 2012 40MM   |   Asin: B00CJI2TU0

This Gates Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation and have metric dimensions. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets and pulleys (not included) are available in a variety of outside diameters to fit this Taper-Lock bushing, allowing the precise selection of the number of drive teeth or grooves. This bushing is suitable for use in a wide range of mechanical and electronic adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO.

What's in the Box? Taper-Lock bushing Mounting hardware

Features

  • For use with Taper-Lock sheaves, sprockets and pulleys (not included)
  • Carbon steel for strength and resistance to wear
  • Allows precise selection of number of drive teeth or grooves in adjustable speed applications
  • Mounting hardware included
  • Metric sizes
  • See more on Amazon...

Brand: Gates   |   Manufacturer: Gates

Package Dimensions: 1.4 x 2.9 x 3.2 inches (3.6 x 7.4 x 8.1 cm)

Amazon Price: $26.83 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $26.83

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Browning 2517X 2 7/16 Taper Bore Bushing 2-7/16 Bore"

 Ean: 0662289616558   |    PartNumber: 2517X 2 7/16   |   Asin: B003RMAYQ8

Size # 2517X 2 7/16 Taper Bore Bushing 2-7/16 Bore"

Features

  • No flange projection for close applications
  • Sizes available: 1008, 1108, 1210,1215,1310, 1610, 1615, 2012, 2517, 2525, 3020, 3030, 3535, 4040, 4545, 5050, 6050, 7060, 8065
  • Do not lubricate bushing or shaft
  • To install, match the hole pattern not threaded holes
  • See more on Amazon...

Brand: Browning   |   Manufacturer: Regal

Package Dimensions: 2.1 x 3.6 x 3.8 inches (5.3 x 9.1 x 9.7 cm)

Amazon Price: $49.20 | as of 01/15/2019(6:21pm pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $49.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Martin 2012 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5" Bore, 2.75" OD, 1.25" Length

 Ean: 0697950034386   |    PartNumber: 2012 1 1/2   |   Asin: B004BKIRPU

This Martin 2012 taper bushing is made of sintered steel and is used for mounting a taper bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of sintered powder steel for greater strength and wear resistance than plain carbon steel. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with taper bushings from various manufacturers. This taper bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

Martin Sprocket & Gear manufactures power transmission and conveying products. The company, founded in 1951 and headquartered in Arlington, TX, provides tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut f r Normung (DIN) standards.

Features

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Sintered steel for greater strength and resistance to wear than steel
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with taper bushings from various manufacturers
  • See more on Amazon...

Brand: Martin   |   Manufacturer: MARTIN

Item Dimensions: 18 x 16 x 23 inches (45.7 x 40.6 x 58.4 cm)   |   Package Dimensions: 1.4 x 2.9 x 3.1 inches (3.6 x 7.4 x 7.9 cm)

First Available: 2017-05-15

Amazon Price: $20.85 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $36.32

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Martin 1615 1 Taper Bushing, Sintered Steel, Inch, 1" Bore, 2.25" OD, 1.5" Length

 Ean: 0697950034119   |    PartNumber: 1615 1   |   Asin: B004BKIR0U

This Martin 1615 taper bushing is made of sintered steel and is used for mounting a taper bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of sintered powder steel for greater strength and wear resistance than plain carbon steel. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with taper bushings from various manufacturers. This taper bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

Martin Sprocket & Gear manufactures power transmission and conveying products. The company, founded in 1951 and headquartered in Arlington, TX, provides tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut f r Normung (DIN) standards.

Features

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Sintered steel for greater strength and resistance to wear than steel
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with taper bushings from various manufacturers
  • See more on Amazon...

Brand: Martin   |   Manufacturer: MARTIN

Item Dimensions: 2 x 3 x 3 inches (5.1 x 7.6 x 7.6 cm)   |   Package Dimensions: 1.5 x 2.4 x 2.5 inches (3.8 x 6.1 x 6.4 cm)

Amazon Price: $11.49 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 1 to 2 months
List Price: $21.38 | Used Price: $9.19

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Martin 1615 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 57.15 mm OD, 38.1 mm Length

 Ean: 0697950210575   |    PartNumber: 1615 14MM   |   Asin: B004BKIRFA

This Martin 1615 taper bushing is made of sintered steel and is used for mounting a taper bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of sintered powder steel for greater strength and wear resistance than plain carbon steel. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with taper bushings from various manufacturers. This taper bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

Martin Sprocket & Gear manufactures power transmission and conveying products. The company, founded in 1951 and headquartered in Arlington, TX, provides tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut f r Normung (DIN) standards.

Features

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Sintered steel for greater strength and resistance to wear than steel
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with taper bushings from various manufacturers
  • See more on Amazon...

Brand: Martin   |   Manufacturer: MARTIN

Package Dimensions: 1.5 x 2.4 x 2.6 inches (3.8 x 6.1 x 6.6 cm)

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Martin 1215 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 47.62 mm OD, 38.1 mm Length

 Ean: 0697950210292   |    PartNumber: 1215 14MM   |   Asin: B004BKIPL6

This Martin 1215 taper bushing is made of sintered steel and is used for mounting a taper bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of sintered powder steel for greater strength and wear resistance than plain carbon steel. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with taper bushings from various manufacturers. This taper bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

Martin Sprocket & Gear manufactures power transmission and conveying products. The company, founded in 1951 and headquartered in Arlington, TX, provides tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut f r Normung (DIN) standards.

Features

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Sintered steel for greater strength and resistance to wear than steel
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with taper bushings from various manufacturers
  • See more on Amazon...

Brand: Martin   |   Manufacturer: MARTIN

Package Dimensions: 1.8 x 2.2 x 2.3 inches (4.6 x 5.6 x 5.8 cm)

Amazon Price: $19.27 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $19.27

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Martin 1610 35MM Taper Bushing, Sintered Steel, Metric, 35 mm Bore, 57.15 mm OD, 25.4 mm Length

 Ean: 0697950216416   |    PartNumber: 1610 35MM   |   Asin: B004BKIQYM

BRAND NEW - Martin 1610 35MM Tapered Bushing As shown in pictures. BRAND NEW, NEVER USED. There are no issues to note. All of our electronic parts are guaranteed and come with a 60 DAY REPLACEMENT WARRANTY. 100% Money Back Guarantee. FAST FREE SHIPPING! For USA and CANADA. EXPRESS & OVERNIGHT SHIPPING AVAILABLE UPON REQUEST IF NEEDED.

Features

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Sintered steel for greater strength and resistance to wear than steel
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with taper bushings from various manufacturers
  • See more on Amazon...

Brand: Martin   |   Manufacturer: MARTIN

Package Dimensions: 1 x 2.3 x 2.5 inches (2.5 x 5.8 x 6.4 cm)

Amazon Price: $18.31 | as of 01/15/2019(6:21pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Gates 1610 1. Taper-Lock Bushing, 1" Bore, 1.0" Length, 1.6" Max Bore

 Ean: 0072053088953   |    PartNumber: 1610 1.   |   Asin: B00CJHHGQS

This Gates Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not included) are available in a variety of outside diameters to fit this Taper-Lock bushing, allowing the precise selection of the number of drive teeth or grooves. This bushing is suitable for use in a wide range of mechanical and electronic adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO.

What's in the Box? Taper-Lock bushing Mounting hardware

Features

  • For use with Taper-Lock sheaves, sprockets and pulleys (not included)
  • Carbon steel for strength and resistance to wear
  • Allows precise selection of number of drive teeth or grooves in adjustable speed applications
  • Mounting hardware included
  • See more on Amazon...

Brand: Gates   |   Manufacturer: Gates

Item Dimensions: 1.2 x 2.3 x 2.6 inches (3.0 x 5.8 x 6.6 cm)   |   Package Dimensions: 1.2 x 2.4 x 2.6 inches (3.0 x 6.1 x 6.6 cm)

Amazon Price: $18.63 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $21.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Browning 3TC100 Split Taper Sheave, Cast Iron, 3 Groove, C Belt, Uses Q1 Bushing

Model: 1009828   |    Mpn: 3TC100   |    Ean: 0662289223497   |    PartNumber: 3TC100   |   Asin: B003PYUFLC

Browning, 3TC100, Fixed Pitch Sheave, 3 Groove(s), 10.4 Inch Diameter, Q1 Bushing Required, Used with C Belts

Features

Brand: Browning   |   Manufacturer: Regal

Package Dimensions: 3.6 x 11 x 11.2 inches (9.1 x 27.9 x 28.4 cm)

Amazon Price: $444.34 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $444.46

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Gates 1108 1. Taper-Lock Bushing, 1" Bore, 0.8" Length, 1.1" Max Bore

 Ean: 0072053088892   |    PartNumber: 1108 1.   |   Asin: B00CJHFXI6

This Gates Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not included) are available in a variety of outside diameters to fit this Taper-Lock bushing, allowing the precise selection of the number of drive teeth or grooves. This bushing is suitable for use in a wide range of mechanical and electronic adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO.

What's in the Box? Taper-Lock bushing Mounting hardware

Features

  • For use with Taper-Lock sheaves, sprockets and pulleys (not included)
  • Carbon steel for strength and resistance to wear
  • Allows precise selection of number of drive teeth or grooves in adjustable speed applications
  • Mounting hardware included
  • See more on Amazon...

Brand: Gates   |   Manufacturer: Gates

Package Dimensions: 1 x 2.4 x 2.6 inches (2.5 x 6.1 x 6.6 cm)

Amazon Price: $7.41 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $7.42

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Gates 3020 60MM Taper-Lock Bushing, 60mm Bore, 2.0" Length, 3.0" Max Bore

 Ean: 0072053112429   |    PartNumber: 3020 60MM   |   Asin: B00CJI3JC2

This Gates Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation and have metric dimensions. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets and pulleys (not included) are available in a variety of outside diameters to fit this Taper-Lock bushing, allowing the precise selection of the number of drive teeth or grooves. This bushing is suitable for use in a wide range of mechanical and electronic adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO.

What's in the Box? Taper-Lock bushing Mounting hardware

Features

  • For use with Taper-Lock sheaves, sprockets and pulleys (not included)
  • Carbon steel for strength and resistance to wear
  • Allows precise selection of number of drive teeth or grooves in adjustable speed applications
  • Mounting hardware included
  • Metric sizes
  • See more on Amazon...

Brand: Gates   |   Manufacturer: Gates

Package Dimensions: 2.3 x 5.2 x 5.6 inches (5.8 x 13.2 x 14.2 cm)

Amazon Price: $40.28 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $40.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Martin 1610 1 Taper Bushing, Sintered Steel, Inch, 1" Bore, 2.25" OD, 1" Length

Model: 1610 1   |    Mpn: 1610 1   |    Ean: 0697950033921   |    PartNumber: 1610 1   |   Asin: B004BKIQJC

This Martin 1610 taper bushing is made of sintered steel and is used for mounting a taper bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of sintered powder steel for greater strength and wear resistance than plain carbon steel. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with taper bushings from various manufacturers. This taper bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

Martin Sprocket & Gear manufactures power transmission and conveying products. The company, founded in 1951 and headquartered in Arlington, TX, provides tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut f r Normung (DIN) standards.

Features

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Sintered steel for greater strength and resistance to wear than steel
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with taper bushings from various manufacturers
  • See more on Amazon...

Brand: Martin   |   Manufacturer: MARTIN

Item Dimensions: 2 x 6 x 8 inches (5.1 x 15.2 x 20.3 cm)   |   Package Dimensions: 1 x 2.4 x 2.5 inches (2.5 x 6.1 x 6.4 cm)

Amazon Price: $12.64 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $15.44 | Used Price: $10.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

TB Woods 1610 TL161058 Taper Lock Bushing, Cast Iron, Inch, 0.625" Bore, 1200 lbs/in Torque, Standard Design, Standard Keyway

 Ean: 0698672342384   |    PartNumber: TL161058   |   Asin: B004LDKCLY

This TB Woods 1610 taper lock bushing with a torque capacity of 1,200 in-lbs is made of cast iron and is used for mounting a taper lock bushed pulley, sheave, or sprocket on a drive shaft. It is flush mounted for reduced mounting width and has a split taper for a tight clamp to shafts. The bushing is made of cast iron for resistance to wear, galling, and corrosion. It is keyed to the shaft to prevent the shaft from rotating in the bushing, and it is interchangeable with taper lock bushings from various manufacturers. This taper lock bushing is used in automobiles, construction equipment, agricultural machinery, and home appliances, among others.

Bushings are cylindrical parts used to mount pulleys, sheaves, sprockets, or other components to drive shafts for the transmission of mechanical power. Most bushings are split and have a tapered outside surface so they will clamp to the shaft when tightened against the tapered bore of the driven component. They are made of durable metals such as cast iron and steel. Bushings are used in automobiles, construction equipment, and machine tools, among others.

TB Wood's manufactures bushings, pulleys, couplings, and electronic motor controls. The company, founded in 1857 and headquartered in Chambersburg, PA, meets International Organization for Standardization (ISO) standard 9001:2008.

Features

  • Taper lock bushing with a torque capacity of 1,200 in-lbs for mounting a pulley, sheave, or sprocket on a drive shaft
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Cast iron for resistance to wear, galling, and corrosion
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with taper lock bushings from various manufacturers
  • See more on Amazon...

Brand: TB Woods   |   Manufacturer: TB Woods

Package Dimensions: 1.2 x 2.5 x 2.7 inches (3.0 x 6.4 x 6.9 cm)

Amazon Price: $24.95 | as of 01/15/2019(6:21pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Gates 2517 28MM Taper-Lock Bushing, 28mm Bore, 1.7" Length, 2.5" Max Bore

 Ean: 0072053112108   |    PartNumber: 2517 28MM   |   Asin: B00CJI339G

This Gates Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation and have metric dimensions. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets and pulleys (not included) are available in a variety of outside diameters to fit this Taper-Lock bushing, allowing the precise selection of the number of drive teeth or grooves. This bushing is suitable for use in a wide range of mechanical and electronic adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO.

What's in the Box? Taper-Lock bushing Mounting hardware

Features

  • For use with Taper-Lock sheaves, sprockets and pulleys (not included)
  • Carbon steel for strength and resistance to wear
  • Allows precise selection of number of drive teeth or grooves in adjustable speed applications
  • Mounting hardware included
  • Metric sizes
  • See more on Amazon...

Brand: Gates   |   Manufacturer: Gates

Package Dimensions: 2 x 3.6 x 3.8 inches (5.1 x 9.1 x 9.7 cm)

Amazon Price: $33.66 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 1 to 3 months
List Price: $35.04

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Gates 1210 1. Taper-Lock Bushing, 1" Bore, 1.0" Length, 1.2" Max Bore

 Ean: 0072053088915   |    PartNumber: 1210 1.   |   Asin: B00CJHGAXS

This Gates Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation. The carbon steel bushing provides strength and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not included) are available in a variety of outside diameters to fit this Taper-Lock bushing, allowing the precise selection of the number of drive teeth or grooves. This bushing is suitable for use in a wide range of mechanical and electronic adjustable drives, including automotive and printing industries.

Plain bearings provide low-friction sliding contact for relative motion between parts of a machine. They are the simplest type of bearing, with no rolling elements, and there are three basic types of plain bearings: radial plain bearings (also called sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also called washers) to support axial loads on shafts, and linear bearings to support and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to support axial loads. Spherical plain bearings are radial bearings that allow for angular misalignment of the shaft. Plain bearings are made from durable, low-friction materials such as sintered or cast bronze alloys, plastic, or a combination of a metal shell and a plastic bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are used in automobiles, construction and mining equipment, textile manufacturing equipment, and robotics, among others.

Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO.

What's in the Box? Taper-Lock bushing Mounting hardware

Features

  • For use with Taper-Lock sheaves, sprockets and pulleys (not included)
  • Carbon steel for strength and resistance to wear
  • Allows precise selection of number of drive teeth or grooves in adjustable speed applications
  • Mounting hardware included
  • See more on Amazon...

Brand: Gates   |   Manufacturer: Gates

Item Dimensions: 1.2 x 2.3 x 2.7 inches (3.0 x 5.8 x 6.9 cm)   |   Package Dimensions: 1.2 x 2.4 x 2.6 inches (3.0 x 6.1 x 6.6 cm)

First Available: 2017-11-25

Amazon Price: $12.61 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Martin 1008 1 Taper Bushing, Sintered Steel, Inch, 1" Bore, 1.386" OD, 0.875" Length

Model: 1008-1   |    Mpn: 1008 1   |    Ean: 0697950033310   |    PartNumber: 1008 1   |   Asin: B004BKIN5Y

This item is new, including original packaging

Features

  • Taper bushing for mounting a pulley, sheave, or sprocket on a drive shaft
  • Flush-mounted bushing with a split taper for reduced mounting width and a tight clamp to shafts
  • Sintered steel for greater strength and resistance to wear than steel
  • Keyed to the shaft to prevent the shaft from rotating in the bushing
  • Interchangeable with taper bushings from various manufacturers
  • See more on Amazon...

Brand: Martin   |   Manufacturer: MARTIN

Item Dimensions: 2 x 6 x 8 inches (5.1 x 15.2 x 20.3 cm)   |   Package Dimensions: 1.1 x 2.1 x 2.2 inches (2.8 x 5.3 x 5.6 cm)

Amazon Price: $12.64 | as of 01/15/2019(6:21pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $12.64

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. TB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625" Bore, 1200 lbs/in Torque, Standar...
  2. Martin 2517 1 3/8 Taper Bushing, Sintered Steel, Inch, 1.38" Bore, 3.375" OD, 1.75" Length
  3. Browning 1615X 1 3/8 Taper Bore Bushing 1-3/8 Bore"
  4. Gates 1610 40MM Taper-Lock Bushing, 40mm Bore, 1.0" Length, 1.6" Max Bore
  5. Gates 2012 40MM Taper-Lock Bushing, 40mm Bore, 1.2" Length, 2.0" Max Bore
  6. Browning 2517X 2 7/16 Taper Bore Bushing 2-7/16 Bore"
  7. Martin 2012 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5" Bore, 2.75" OD, 1.25" Length
  8. Martin 1615 1 Taper Bushing, Sintered Steel, Inch, 1" Bore, 2.25" OD, 1.5" Length
  9. Martin 1615 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 57.15 mm OD, 38.1 mm Length
  10. Martin 1215 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 47.62 mm OD, 38.1 mm Length

Most Wished For

  1. TB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625" Bore, 1200 lbs/in Torque, Standar...
  2. Martin 2517 1 3/8 Taper Bushing, Sintered Steel, Inch, 1.38" Bore, 3.375" OD, 1.75" Length
  3. Browning 1615X 1 3/8 Taper Bore Bushing 1-3/8 Bore"
  4. Gates 1610 40MM Taper-Lock Bushing, 40mm Bore, 1.0" Length, 1.6" Max Bore
  5. Gates 2012 40MM Taper-Lock Bushing, 40mm Bore, 1.2" Length, 2.0" Max Bore
  6. Browning 2517X 2 7/16 Taper Bore Bushing 2-7/16 Bore"
  7. Martin 2012 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5" Bore, 2.75" OD, 1.25" Length
  8. Martin 1615 1 Taper Bushing, Sintered Steel, Inch, 1" Bore, 2.25" OD, 1.5" Length
  9. Martin 1615 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 57.15 mm OD, 38.1 mm Length
  10. Martin 1215 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 47.62 mm OD, 38.1 mm Length

Most Gifted

  1. TB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625" Bore, 1200 lbs/in Torque, Standar...
  2. Martin 2517 1 3/8 Taper Bushing, Sintered Steel, Inch, 1.38" Bore, 3.375" OD, 1.75" Length
  3. Browning 1615X 1 3/8 Taper Bore Bushing 1-3/8 Bore"
  4. Gates 1610 40MM Taper-Lock Bushing, 40mm Bore, 1.0" Length, 1.6" Max Bore
  5. Gates 2012 40MM Taper-Lock Bushing, 40mm Bore, 1.2" Length, 2.0" Max Bore
  6. Browning 2517X 2 7/16 Taper Bore Bushing 2-7/16 Bore"
  7. Martin 2012 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5" Bore, 2.75" OD, 1.25" Length
  8. Martin 1615 1 Taper Bushing, Sintered Steel, Inch, 1" Bore, 2.25" OD, 1.5" Length
  9. Martin 1615 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 57.15 mm OD, 38.1 mm Length
  10. Martin 1215 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 47.62 mm OD, 38.1 mm Length

Top Selling

  1. TB Woods 1108 TL110858 Taper Lock Bushing, Cast Iron, Inch, 0.625" Bore, 1200 lbs/in Torque, Standar...
  2. Martin 2517 1 3/8 Taper Bushing, Sintered Steel, Inch, 1.38" Bore, 3.375" OD, 1.75" Length
  3. Browning 1615X 1 3/8 Taper Bore Bushing 1-3/8 Bore"
  4. Gates 1610 40MM Taper-Lock Bushing, 40mm Bore, 1.0" Length, 1.6" Max Bore
  5. Gates 2012 40MM Taper-Lock Bushing, 40mm Bore, 1.2" Length, 2.0" Max Bore
  6. Browning 2517X 2 7/16 Taper Bore Bushing 2-7/16 Bore"
  7. Martin 2012 1 1/2 Taper Bushing, Sintered Steel, Inch, 1.5" Bore, 2.75" OD, 1.25" Length
  8. Martin 1615 1 Taper Bushing, Sintered Steel, Inch, 1" Bore, 2.25" OD, 1.5" Length
  9. Martin 1615 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 57.15 mm OD, 38.1 mm Length
  10. Martin 1215 14MM Taper Bushing, Sintered Steel, Metric, 14 mm Bore, 47.62 mm OD, 38.1 mm Length



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.