Frontpage > Industrial > Power Transmission > Thrust Roller Bearings

Best Thrust Roller Bearings - Buying Guide

Last Updated: 04/20/2019

Share on

Bestselling Thrust Roller Bearings on Amazon

  1. Koyo NTA-2233 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-3/8" ID, 2-1/16" OD,...
  2. Koyo NTA-1220 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 3/4" ID, 1-1/4" OD, 5/...
  3. Koyo NTA-3244 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2" ID, 2-3/4" OD, 5/64...
  4. SKF AS 2542 Thrust Roller Bearing Washer, Metric, 25mm Bore, 42mm OD, 1mm Width
  5. Koyo NTA-2435 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-1/2" ID, 2-3/16" OD,...
  6. Koyo NTA-1625 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1" ID, 1-9/16" OD, 5/6...
  7. Koyo FNT-1528 Thrust Needle Roller and Cage Assembly, Open, Steel Cage, Metric, 15mm ID, 28mm OD, 2m...
  8. Koyo NTA-815 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1/2" ID, 15/16" OD, 5/6...
  9. INA AS130170 Thrust Roller Bearing Washer, Metric, 130mm ID, 170mm OD, 1mm Width
  10. Koyo FNT-1024 Thrust Needle Roller and Cage Assembly, Open, Steel Cage, Metric, 10mm ID, 24mm OD, 2m...

  #1

Koyo NTA-2233 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-3/8" ID, 2-1/16" OD, 5/64" Width, 8000rpm Maximum Rotational Speed, 23200lbf Static Load Capacity, 4800lbf Dynamic Load Capacity

Model: NTA-2233   |    Mpn: NTA-2233   |    Ean: 0605790205323   |    PartNumber: NTA-2233   |   Asin: B006KT30X4

This Koyo thrust needle roller and cage assembly has a steel cage and is suitable for applications with high dynamic axial loads. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces. The cage provides guidance and even spacing of the rollers for reduced friction, vibration, and noise when operated at high speeds, and it is made of hardened steel for greater strength, rigidity, and heat resistance than nylon cages. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance under heavy loads, and have contoured ends to optimize the distribution of contact stress. This thrust needle roller and cage assembly meets American National Standards Institute/American Bearing Manufacturers Association standard ANSI/ABMA 21.2 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 2.06 x 0.07 x 1.37 inches (5.2 x 0.2 x 3.5 cm)   |   Package Dimensions: 0.9 x 2.2 x 2.3 inches (2.3 x 5.6 x 5.8 cm)

Amazon Price: $2.77 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.16

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Koyo NTA-1220 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 3/4" ID, 1-1/4" OD, 5/64" Width, 14000rpm Maximum Rotational Speed, 8200lbf Static Load Capacity, 2450lbf Dynamic Load Capacity

 Ean: 0605790196867   |    PartNumber: NTA-1220   |   Asin: B006KT30E8

This Koyo thrust needle roller and cage assembly has a steel cage and is suitable for applications with high dynamic axial loads. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces. The cage provides guidance and even spacing of the rollers for reduced friction, vibration, and noise when operated at high speeds, and it is made of hardened steel for greater strength, rigidity, and heat resistance than nylon cages. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance under heavy loads, and have contoured ends to optimize the distribution of contact stress. This thrust needle roller and cage assembly meets American National Standards Institute/American Bearing Manufacturers Association standard ANSI/ABMA 21.2 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 1.25 x 0.07 x 0.75 inches (3.2 x 0.2 x 1.9 cm)   |   Package Dimensions: 0.9 x 2.2 x 2.3 inches (2.3 x 5.6 x 5.8 cm)

Amazon Price: $2.00 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $3.73

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Koyo NTA-3244 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2" ID, 2-3/4" OD, 5/64" Width, 6100rpm Maximum Rotational Speed, 29800lbf Static Load Capacity, 5400lbf Dynamic Load Capacity

 Ean: 0605790209628   |    PartNumber: NTA-3244   |   Asin: B006KT318S

Thrust Roller Bearings 50.8 X 69.85 X 1.981, Needle Roller Bearing, Roller Assembly Only

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 2.75 x 0.07 x 2 inches (7.0 x 0.2 x 5.1 cm)   |   Package Dimensions: 1 x 3.3 x 3.4 inches (2.5 x 8.4 x 8.6 cm)

Amazon Price: $3.14 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.86

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

SKF AS 2542 Thrust Roller Bearing Washer, Metric, 25mm Bore, 42mm OD, 1mm Width

Model: AS 2542   |    Mpn: AS 2542   |    Ean: 7316570045987   |    PartNumber: AS 2542   |   Asin: B007VHSF6G

This SKF AS-series thrust roller bearing washer is designed for use with SKF AXK-series needle roller and cage thrust assemblies in applications where adjacent components are unhardened and cannot serve as raceways but are sufficiently rigid and dimensionally accurate to support the washer. This thrust washer serves as a raceway for the thrust assembly s rolling elements and can be used as a housing washer (outer ring) centered in the housing or a shaft washer (inner ring) centered on the shaft. Both sides of the washer are hardened and polished and can be used as raceways. The washer is made of spring steel with high yield strength for noise reduction and absorption of shock and vibration. This thrust washer is for use in various applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Specifications Boundary dimensions and tolerances ISO 3031:2000 Housing tolerance (when used as a housing washer) H9 Shaft tolerance (when used as a shaft washer) h8 Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

SKF Group manufactures bearings and units, seals, mechatronics, and lubrication systems that meet International Organization for Standardization (ISO) 14001 and 9001, and Occupational Health and Safety Assessment Series (OHSAS) 18001 standards for quality assurance. The company, founded in 1907, is headquartered in G teborg, Sweden.

Features

  • Thrust washer for use with SKF AXK-series needle roller and cage thrust assemblies in applications where adjacent components cannot serve as raceways
  • Spring steel with high yield strength for shock and vibration absorption
  • Both sides of the washer are hardened and polished for use as raceway surfaces
  • See more on Amazon...

Brand: SKF   |   Manufacturer: SKF

Package Dimensions: 0.4 x 2.4 x 3.8 inches (1.0 x 6.1 x 9.7 cm)

Amazon Price: $3.52 | as of 04/20/2019(5:32pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Koyo NTA-2435 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-1/2" ID, 2-3/16" OD, 5/64" Width, 7600rpm Maximum Rotational Speed, 26500lbf Static Load Capacity, 5220lbf Dynamic Load Capacity

Model: NTA-2435   |    Mpn: NTA-2435   |    Ean: 0060579020533   |    PartNumber: NTA-2435   |   Asin: B007EDKYMK

This Koyo thrust needle roller and cage assembly has a steel cage and is suitable for applications with high dynamic axial loads. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces. The cage provides guidance and even spacing of the rollers for reduced friction, vibration, and noise when operated at high speeds, and it is made of hardened steel for greater strength, rigidity, and heat resistance than nylon cages. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance under heavy loads, and have contoured ends to optimize the distribution of contact stress. This thrust needle roller and cage assembly meets American National Standards Institute/American Bearing Manufacturers Association standard ANSI/ABMA 21.2 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 18 x 16 x 23 inches (45.7 x 40.6 x 58.4 cm)   |   Package Dimensions: 1.1 x 2.9 x 2.9 inches (2.8 x 7.4 x 7.4 cm)

Amazon Price: $2.86 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.32

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Koyo NTA-1625 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1" ID, 1-9/16" OD, 5/64" Width, 11000rpm Maximum Rotational Speed, 12100lbf Static Load Capacity, 3110lbf Dynamic Load Capacity

Model: NTA1625   |    Mpn: NTA-1625   |    Ean: 0605790196874   |    PartNumber: NTA-1625   |   Asin: B006KT30JI

This Koyo thrust needle roller and cage assembly has a steel cage and is suitable for applications with high dynamic axial loads. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces. The cage provides guidance and even spacing of the rollers for reduced friction, vibration, and noise when operated at high speeds, and it is made of hardened steel for greater strength, rigidity, and heat resistance than nylon cages. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance under heavy loads, and have contoured ends to optimize the distribution of contact stress. This thrust needle roller and cage assembly meets American National Standards Institute/American Bearing Manufacturers Association standard ANSI/ABMA 21.2 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 1.56 x 0.07 x 1 inches (4.0 x 0.2 x 2.5 cm)   |   Package Dimensions: 0.9 x 2.2 x 2.3 inches (2.3 x 5.6 x 5.8 cm)

Amazon Price: $2.10 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.37

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Koyo NTA-815 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1/2" ID, 15/16" OD, 5/64" Width, 19000rpm Maximum Rotational Speed, 4300lbf Static Load Capacity, 1610lbf Dynamic Load Capacity

 Ean: 0605790192739   |    PartNumber: NTA-815   |   Asin: B006KT3084

Needle Thrust Bearing Cage And Roller Assembly

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 0.93 x 0.07 x 0.5 inches (2.4 x 0.2 x 1.3 cm)   |   Package Dimensions: 0.2 x 1 x 1 inches (0.5 x 2.5 x 2.5 cm)

Amazon Price: $2.00 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $3.73

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

INA AS130170 Thrust Roller Bearing Washer, Metric, 130mm ID, 170mm OD, 1mm Width

Model: AS130170   |    Mpn: AS130170   |    Ean: 0035373021673   |    PartNumber: AS130170   |   Asin: B007D2QDB8

This INA AS-series axial roller bearing washer is designed for use with INA AXK-series axial needle roller and cage assemblies and INA K811-series axial cylindrical roller and cage assemblies. It is suitable for applications where precise centering is not required and the adjacent machine part is not hardened but is sufficiently rigid and dimensionally accurate to support the washer. This axial bearing washer serves as a raceway surface for the thrust assembly s rolling elements and can be used as a housing locating washer (outer ring) centered in the housing or a shaft locating washer (inner ring) centered on the shaft. Both sides of the washer are hardened and polished and can be used as raceways. Additionally, the raceways are ground to accommodate higher speeds and provide greater running accuracy than unground raceways. The washer is made of punched, low alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and it can be used at operating temperatures from -20 degrees C to 120 C (-4 degrees F to 248 F). This axial bearing washer is suitable for use in various applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Specifications Boundary dimensions and tolerances DIN 5405-3 (ISO 3030) Through-hardened steel ISO 683-17 Housing bore tolerance (when used as a housing washer) H9 Shaft tolerance (when used as a shaft washer) h8 System for creating part numbers for rolling bearings DIN 623-1 Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

The Schaeffler Group s INA brand manufactures rolling bearings, plain bearings, and linear guides for the automotive industry. The company, founded in 1946, is headquartered in Herzogenaurach, Germany, and meets International Organization for Standardization (ISO) and Deutsches Institut f r Normung (DIN) standards for quality assurance.

Features

  • Axial bearing washer for use with INA axial needle or cylindrical roller and cage assemblies in applications where adjacent components cannot serve as raceways and precise centering is not required
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads
  • Ground raceway for higher speeds and greater running accuracy than unground raceways
  • See more on Amazon...

Brand: INA   |   Manufacturer: INA

Package Dimensions: 2.2 x 7.2 x 8.2 inches (5.6 x 18.3 x 20.8 cm)

Amazon Price: $52.38 | as of 04/20/2019(5:32pm pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Koyo FNT-1024 Thrust Needle Roller and Cage Assembly, Open, Steel Cage, Metric, 10mm ID, 24mm OD, 2mm Width, 17000rpm Maximum Rotational Speed, 5670lbf Static Load Capacity, 2060lbf Dynamic Load Capacity

Model: FNT-1024   |    Mpn: FNT-1024   |    Ean: 0605790190490   |    PartNumber: FNT-1024   |   Asin: B007EE5S5M

New in Factory box - FNT1024 Torrington New Needle Bearing

Features

Brand: Koyo   |   Manufacturer: Koyo Torrington

Package Dimensions: 0.9 x 2.2 x 2.3 inches (2.3 x 5.6 x 5.8 cm)

First Available: 2017-11-25

Amazon Price: $2.46 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $4.88

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Lemedy Replacement 10pcs 36 Needles Cartridge for Dermapen Beauty Tool

 PartNumber: GYPL-DPNB-36-01   |   Asin: B07QKY9ZK6

Features

  • 10pcs replacement needles.
  • Use a new one each time, do not reuse. If not, it may cause skin infection.
  • Only for the personal use, don't share with others in order to avoid infection.
  • Sterilized it with 75% alcohol before use.
  • Any problems, please feel free contact with us.
  • See more on Amazon...

Brand: Lemedy   |   Manufacturer: Lemedy

Amazon Price: $15.99 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $15.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Koyo NTA-4458 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2-3/4" ID, 3-5/8" OD, 1/8" Width, 54.5lbf Static Load Capacity, 9.38lbf Dynamic Load Capacity

Model: NTA-4458   |    Mpn: NTA-4458   |    Ean: 0605790192715   |    PartNumber: NTA-4458   |   Asin: B007EDL1T0

This Koyo thrust needle roller and cage assembly has a steel cage and is suitable for applications with high dynamic axial loads. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces. The cage provides guidance and even spacing of the rollers for reduced friction, vibration, and noise when operated at high speeds, and it is made of hardened steel for greater strength, rigidity, and heat resistance than nylon cages. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance under heavy loads, and have contoured ends to optimize the distribution of contact stress. This thrust needle roller and cage assembly meets American National Standards Institute/American Bearing Manufacturers Association standard ANSI/ABMA 21.2 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 3.62 x 0.12 x 2.75 inches (9.2 x 0.3 x 7.0 cm)   |   Package Dimensions: 1.2 x 4.1 x 4.1 inches (3.0 x 10.4 x 10.4 cm)

Amazon Price: $6.43 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $6.43

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Koyo NTA-4052 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2-1/2" ID, 3-1/4" OD, 5/64" Width, 5100rpm Maximum Rotational Speed, 34200lbf Static Load Capacity, 5740lbf Dynamic Load Capacity

Model: NTA-4052   |    Mpn: NTA-4052   |    Ean: 0605790213854   |    PartNumber: NTA-4052   |   Asin: B006KT31GK

New in Factory box - NTA4052 Koyo New Needle Bearing

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 3.25 x 0.07 x 2.5 inches (8.3 x 0.2 x 6.4 cm)   |   Package Dimensions: 1.5 x 3.7 x 3.8 inches (3.8 x 9.4 x 9.7 cm)

Amazon Price: $6.66 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $6.66

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Koyo NTA-2840 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-3/4" ID, 2-1/2" OD, 5/64" Width, 6800rpm Maximum Rotational Speed, 30900lbf Static Load Capacity, 5690lbf Dynamic Load Capacity

 Ean: 0605790192692   |    PartNumber: NTA-2840   |   Asin: B006KT316A

Thrust Roller Bearings 44.45 X 63.5 X 1.981, Needle Roller Bearing, Roller Assembly Only

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 2.5 x 0.07 x 1.75 inches (6.4 x 0.2 x 4.4 cm)   |   Package Dimensions: 1 x 2.8 x 2.9 inches (2.5 x 7.1 x 7.4 cm)

Amazon Price: $3.01 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

INA AS7095 Thrust Roller Bearing Washer, Metric, 70mm ID, 95mm OD, 1mm Width

Model: AS7095   |    Mpn: AS7095   |    Ean: 4012802710687   |    PartNumber: AS7095   |   Asin: B007D2RD7Q

This INA AS-series axial roller bearing washer is designed for use with INA AXK-series axial needle roller and cage assemblies and INA K811-series axial cylindrical roller and cage assemblies. It is suitable for applications where precise centering is not required and the adjacent machine part is not hardened but is sufficiently rigid and dimensionally accurate to support the washer. This axial bearing washer serves as a raceway surface for the thrust assembly s rolling elements and can be used as a housing locating washer (outer ring) centered in the housing or a shaft locating washer (inner ring) centered on the shaft. Both sides of the washer are hardened and polished and can be used as raceways. Additionally, the raceways are ground to accommodate higher speeds and provide greater running accuracy than unground raceways. The washer is made of punched, low alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and it can be used at operating temperatures from -20 degrees C to 120 C (-4 degrees F to 248 F). This axial bearing washer is suitable for use in various applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Specifications Boundary dimensions and tolerances DIN 5405-3 (ISO 3030) Through-hardened steel ISO 683-17 Housing bore tolerance (when used as a housing washer) H9 Shaft tolerance (when used as a shaft washer) h8 System for creating part numbers for rolling bearings DIN 623-1 Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

The Schaeffler Group s INA brand manufactures rolling bearings, plain bearings, and linear guides for the automotive industry. The company, founded in 1946, is headquartered in Herzogenaurach, Germany, and meets International Organization for Standardization (ISO) and Deutsches Institut f r Normung (DIN) standards for quality assurance.

Features

  • Axial bearing washer for use with INA axial needle or cylindrical roller and cage assemblies in applications where adjacent components cannot serve as raceways and precise centering is not required
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads
  • Ground raceway for higher speeds and greater running accuracy than unground raceways
  • See more on Amazon...

Brand: INA   |   Manufacturer: INA

Package Dimensions: 1 x 4 x 4.1 inches (2.5 x 10.2 x 10.4 cm)

Amazon Price: $9.04 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 1 to 2 months
List Price: $9.04

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Koyo NTA-3648 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2-1/4" ID, 3" OD, 5/64" Width, 5600rpm Maximum Rotational Speed, 32000lbf Static Load Capacity, 5570lbf Dynamic Load Capacity

 Ean: 0605790213847   |    PartNumber: NTA-3648   |   Asin: B006KT31BK

This Koyo thrust needle roller and cage assembly has a steel cage and is suitable for applications with high dynamic axial loads. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces. The cage provides guidance and even spacing of the rollers for reduced friction, vibration, and noise when operated at high speeds, and it is made of hardened steel for greater strength, rigidity, and heat resistance than nylon cages. The needle rollers are made of through-hardened, high-carbon chromium steel for durability and heat tolerance under heavy loads, and have contoured ends to optimize the distribution of contact stress. This thrust needle roller and cage assembly meets American National Standards Institute/American Bearing Manufacturers Association standard ANSI/ABMA 21.2 for quality assurance, and is used in various applications, such as automotive and truck transmissions, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

Roller bearings use rolling elements to maintain a separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. Roller bearings can be open on both ends (a shaft can pass through) or open on one end and closed on the other. An open end can be sealed or shielded to protect the bearing from solid contaminants and moisture that could reduce its lifespan. If an end is sealed, the sealing component is an elastomer lip that contacts the shaft. If it is shielded, the shielding is a non-contact lip, usually made of metal. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Koyo Bearings USA manufactures needle roller bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009, is headquartered in Canton, OH, and meets International Organization for Standardization (ISO) standards 14001 and TS 16949 for quality assurance.

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 3 x 0.07 x 2.25 inches (7.6 x 0.2 x 5.7 cm)   |   Package Dimensions: 1.1 x 3.3 x 3.4 inches (2.8 x 8.4 x 8.6 cm)

Amazon Price: $5.40 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $10.40

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Onwon 10 Pieces Skateboard Bearings - 608 ZZ Sealed Double Shielded 8 x 22 x 7 Miniature Ball Bearings Pro Longboard Inline Skated Bearings

 PartNumber: CSP0592   |   Asin: B07LCJ9VM6

Onwon Skateboard Bearings - 608 ZZ Sealed Double Shielded 8 x 22 x 7 Miniature Ball Bearings Pro Longboard Inline Skated Bearings

This 608ZZ shielded 8x22x7 miniature ball bearing is a single-row bearing for supporting radial loads. The bearing is made of carbon steel for durability and resistance to deformity under heavy loads, and is shielded to keep lubricant in and contaminants out.

it has a revolutions per minute (RPM) limit of 34,000 with grease lubrication. The dimensions of this bearing make it suitable for use in skateboards, inline skates, and scooters, among others.

Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads.

These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed.

Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use.

The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan.

Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

Package includes:
10 x 608zz Bearings

Features

  • Carbon steel for durability and resistance to deformity under heavy loads. Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads.
  • Shields on both sides of the bearing for protection from dirt, rocks, dust, to lengthen the life of the bearing and maintain precision
  • Max rpm 34000 with grease. Pre-lubricated with grease, less friction, requires minimal maintenance
  • High precision high speed bearings used with Skateboards, Longboards, Inline Skates, Rollerblades, Electric Skateboards, and many other rolling applications
  • PRODUCT WARRANTY: If you receive defective XXXXXXXX or missing XXXXXXXX set, please CONTACT US for free replacement. If you are not completely satisfied with our product, we'll give you money back - whatever the reason.
  • See more on Amazon...

Brand: Onwon   |   Manufacturer: Onwon

Package Dimensions: 0.2 x 0.5 x 0.8 inches (0.5 x 1.3 x 2.0 cm)

Amazon Price: $5.98 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $5.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

080HC100 Non-Brand New Thrust Roller Bearing

 PartNumber: 080HC100   |   Asin: B07B7D7Q2Z

New in Factory box - 080HC100 Non-Brand New Thrust Roller Bearing

Features

Brand: Non-Brand   |   Manufacturer: Non-Brand

Amazon Price: $9.95 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 2-3 business days
List Price: $9.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

INA AS6085 Thrust Roller Bearing Washer, Metric, 60mm ID, 85mm OD, 1mm Width

Model: AS6085   |    Mpn: AS6085   |    Ean: 4012802431100   |    PartNumber: AS6085   |   Asin: B007D2R9N4

This INA AS-series axial roller bearing washer is designed for use with INA AXK-series axial needle roller and cage assemblies and INA K811-series axial cylindrical roller and cage assemblies. It is suitable for applications where precise centering is not required and the adjacent machine part is not hardened but is sufficiently rigid and dimensionally accurate to support the washer. This axial bearing washer serves as a raceway surface for the thrust assembly s rolling elements and can be used as a housing locating washer (outer ring) centered in the housing or a shaft locating washer (inner ring) centered on the shaft. Both sides of the washer are hardened and polished and can be used as raceways. Additionally, the raceways are ground to accommodate higher speeds and provide greater running accuracy than unground raceways. The washer is made of punched, low alloy, through-hardened chromium steel for durability, heat tolerance, and resistance to deformity under heavy loads, and it can be used at operating temperatures from -20 degrees C to 120 C (-4 degrees F to 248 F). This axial bearing washer is suitable for use in various applications including machine tool drive shafts, automotive steering gears and clutches, rotary tables, outboard motor propellers, and household appliances.

Specifications Boundary dimensions and tolerances DIN 5405-3 (ISO 3030) Through-hardened steel ISO 683-17 Housing bore tolerance (when used as a housing washer) H9 Shaft tolerance (when used as a shaft washer) h8 System for creating part numbers for rolling bearings DIN 623-1 Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads. These elements can be one of the following types: ball, cylindrical, spherical, barrel, needle, spindle, or tapered. All rolling bearings are open, shielded, or sealed. Sealed bearings are lubricated with oil or grease in the bearing factory, while open and shielded bearings are meant to be lubricated in place, with periodic reapplication of lubrication, based on use. The shield protects the working parts of the bearing from environmental debris that may be introduced and could reduce the ball bearing speed and lifespan. Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, dental equipment, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.

The Schaeffler Group s INA brand manufactures rolling bearings, plain bearings, and linear guides for the automotive industry. The company, founded in 1946, is headquartered in Herzogenaurach, Germany, and meets International Organization for Standardization (ISO) and Deutsches Institut f r Normung (DIN) standards for quality assurance.

Features

  • Axial bearing washer for use with INA axial needle or cylindrical roller and cage assemblies in applications where adjacent components cannot serve as raceways and precise centering is not required
  • Through-hardened chromium steel for durability and resistance to deformity under heavy loads
  • Ground raceway for higher speeds and greater running accuracy than unground raceways
  • See more on Amazon...

Brand: INA   |   Manufacturer: INA

Package Dimensions: 0.2 x 4 x 4 inches (0.5 x 10.2 x 10.2 cm)

Amazon Price: $6.84 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 24 hours
List Price: $6.84

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Koyo NTA-1018 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 5/8" ID, 1-1/8" OD, 5/64" Width, 15000rpm Maximum Rotational Speed, 6830lbf Static Load Capacity, 2200lbf Dynamic Load Capacity

Model: NTA-1018   |    Mpn: NTA-1018   |    Ean: 0605790213823   |    PartNumber: NTA-1018   |   Asin: B006KT30BQ

Thrust Roller Bearings 15.875 X 28.575 X 1.981, Needle Roller Bearing, Roller Assembly Only

Features

  • Thrust needle roller and cage assembly for applications with high dynamic loads
  • High axial load capacity with reduced cross-section for use in restricted spaces
  • Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise
  • Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads
  • Meets ANSI/ABMA standard 21.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 1.12 x 0.07 x 0.62 inches (2.8 x 0.2 x 1.6 cm)   |   Package Dimensions: 0.9 x 2.2 x 2.3 inches (2.3 x 5.6 x 5.8 cm)

Amazon Price: $2.00 | as of 04/20/2019(5:32pm pst)
Availibility: Usually ships in 1-2 business days
List Price: $2.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Koyo NTA-2233 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-3/8" ID, 2-1/16" OD,...
  2. Koyo NTA-1220 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 3/4" ID, 1-1/4" OD, 5/...
  3. Koyo NTA-3244 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2" ID, 2-3/4" OD, 5/64...
  4. SKF AS 2542 Thrust Roller Bearing Washer, Metric, 25mm Bore, 42mm OD, 1mm Width
  5. Koyo NTA-2435 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-1/2" ID, 2-3/16" OD,...
  6. Koyo NTA-1625 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1" ID, 1-9/16" OD, 5/6...
  7. Koyo NTA-815 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1/2" ID, 15/16" OD, 5/6...
  8. INA AS130170 Thrust Roller Bearing Washer, Metric, 130mm ID, 170mm OD, 1mm Width
  9. Koyo FNT-1024 Thrust Needle Roller and Cage Assembly, Open, Steel Cage, Metric, 10mm ID, 24mm OD, 2m...

Most Wished For

  1. Koyo NTA-2233 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-3/8" ID, 2-1/16" OD,...
  2. Koyo NTA-1220 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 3/4" ID, 1-1/4" OD, 5/...
  3. Koyo NTA-3244 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2" ID, 2-3/4" OD, 5/64...
  4. SKF AS 2542 Thrust Roller Bearing Washer, Metric, 25mm Bore, 42mm OD, 1mm Width
  5. Koyo NTA-2435 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-1/2" ID, 2-3/16" OD,...
  6. Koyo NTA-1625 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1" ID, 1-9/16" OD, 5/6...
  7. Koyo NTA-815 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1/2" ID, 15/16" OD, 5/6...
  8. INA AS130170 Thrust Roller Bearing Washer, Metric, 130mm ID, 170mm OD, 1mm Width
  9. Koyo FNT-1024 Thrust Needle Roller and Cage Assembly, Open, Steel Cage, Metric, 10mm ID, 24mm OD, 2m...

Most Gifted

  1. Koyo NTA-2233 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-3/8" ID, 2-1/16" OD,...
  2. Koyo NTA-1220 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 3/4" ID, 1-1/4" OD, 5/...
  3. Koyo NTA-3244 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2" ID, 2-3/4" OD, 5/64...
  4. SKF AS 2542 Thrust Roller Bearing Washer, Metric, 25mm Bore, 42mm OD, 1mm Width
  5. Koyo NTA-2435 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-1/2" ID, 2-3/16" OD,...
  6. Koyo NTA-1625 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1" ID, 1-9/16" OD, 5/6...
  7. Koyo NTA-815 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1/2" ID, 15/16" OD, 5/6...
  8. INA AS130170 Thrust Roller Bearing Washer, Metric, 130mm ID, 170mm OD, 1mm Width
  9. Koyo FNT-1024 Thrust Needle Roller and Cage Assembly, Open, Steel Cage, Metric, 10mm ID, 24mm OD, 2m...

Top Selling

  1. Koyo NTA-2233 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-3/8" ID, 2-1/16" OD,...
  2. Koyo NTA-1220 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 3/4" ID, 1-1/4" OD, 5/...
  3. Koyo NTA-3244 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 2" ID, 2-3/4" OD, 5/64...
  4. SKF AS 2542 Thrust Roller Bearing Washer, Metric, 25mm Bore, 42mm OD, 1mm Width
  5. Koyo NTA-2435 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1-1/2" ID, 2-3/16" OD,...
  6. Koyo NTA-1625 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1" ID, 1-9/16" OD, 5/6...
  7. Koyo NTA-815 Needle Roller and Cage Thrust Assembly, Open, Steel Cage, Inch, 1/2" ID, 15/16" OD, 5/6...
  8. INA AS130170 Thrust Roller Bearing Washer, Metric, 130mm ID, 170mm OD, 1mm Width
  9. Koyo FNT-1024 Thrust Needle Roller and Cage Assembly, Open, Steel Cage, Metric, 10mm ID, 24mm OD, 2m...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.