Frontpage > Industrial > Power Transmission > Track Runner Bearings

Best Track Runner Bearings - Buying Guide

Last Updated: 10/18/2019

Share on

Bestselling Track Runner Bearings on Amazon

  1. McGill FCF5 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 5" Roller Diameter, 3" Roller Width, 4-...
  2. Koyo YCRS-28 Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2" Inner D...
  3. McGill CF2 Cam Follower, Standard Stud, Unsealed/Slotted, Inch, Steel, 2" Roller Diameter, 1-1/4" Ro...
  4. McGill CYR1 3/8S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/8" Roller Diameter, 3/4" Roller Width, 3/...
  5. McGill CF1 1/8SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1-1/8" Roller Diameter, ...
  6. BQLZR 22mm Dia KR22 Stud Type Track Cam Follower Needle Roller Bearing M10 Male Thread Pack of 2
  7. Koyo CRSB-8 Track Roller, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1/2" Roller Diameter, 0.344" ...
  8. McGill CYR1 3/4 S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2...
  9. McGill CF2SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 2" Roller Diameter, 1-1/4" R...
  10. McGill CF7/8S Cam Follower, Standard Stud, Sealed/Slotted, Inch, Steel, 7/8" Roller Diameter, 1/2" R...

  #1

McGill FCF5 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 5" Roller Diameter, 3" Roller Width, 4-1/2" Stud Length, 2" Thread Size, 7-1/2" Overall Length, 2" Stud Diameter

 Ean: 0726166042134   |    PartNumber: FCF5   |   Asin: B0071ARFWI

This McGill FCF series Trakrol steel stud-type cam follower bearing with rubber lip seals supports combined radial and thrust loads in cam- and track-type applications, such as guide rails. This cam follower has a hardened, thick-walled outer ring with a flanged ring on the outer surface that helps direct the load axially. Its thick cross-section helps minimize deformation under bending stresses. It has a stud-type design for through-hole or threaded mounting, and inch threads manufactured to class 2 tolerances on the end of the stud. This cam follower is made of bearing steel treated with black oxide for corrosion protection, and has a ductile inner ring that helps absorb shock loads. Rubber lip seals on both sides of the bearing retain polyurea-thickened grease applied at manufacture and help protect against contaminants. A metal plug seal on the end face further protects the seal from abrasive debris in contaminated environments and resists weld spatter and washout. FCF-series cam followers with an outer diameter size smaller than three inches consist of a precision ball bearing insert with an additional seal (Nyaplate), and sizes larger than three inches consist of a tapered roller bearing insert. Both types of roller bearings support high speeds and contain a large internal grease reservoir that helps reduce the need to relubricate the bearing. The operating temperatures range from -35 to +110 degrees C. This Trackrol bearing is suitable for use in a broad range of applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY, and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower bearing supports combined radial and thrust loads in guide rail applications
  • Stud-type design with a flanged outer surface helps direct the load axially
  • Thick outer ring helps minimize deformation under bending stresses
  • Metal extension plug and rubber lip seals help retain lubricant and prevent contamination
  • Black oxide- treated bearing steel for durability and corrosion resistance
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Package Dimensions: 6.9 x 10.3 x 10.5 inches (17.5 x 26.2 x 26.7 cm)

First Available: 2017-03-12

Amazon Price: $761.65 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 1 to 2 months
List Price: $761.65

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Koyo YCRS-28 Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2" Inner Diameter, 1-1/16" Overall Width

Model: YCRS-28   |    Mpn: YCRS-28   |    Ean: 0605790219153   |    PartNumber: YCRS-28   |   Asin: B0071AQMTA

This Koyo YCRS series yoke-type track roller bearing has rubber seals and is suitable for supporting high static and dynamic loads in track-type applications. The yoke-type design is appropriate for heavier loads or where clevis or shaft mounting is preferred. A thick-walled outer ring helps minimize deformation under heavy radial and shock loads. This track roller has a full complement of needle bearings for higher radial load capacity than caged bearings. Rubber seals at each end retain lubricant and protect against contaminants. This track roller is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

Koyo Bearings USA manufactures bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009 and headquartered in Canton, OH, meets International Organization for Standardization Technical Specification (ISO/TS) standard 16949 and ISO standard 14001.

Features

  • Track roller with needle bearings supports high static and dynamic loads in track-type applications
  • Full complement of bearings for higher radial load capacity than caged bearings
  • Yoke-type rollers for use with heavier loads or where clevis mounting is preferred
  • Thick outer ring helps minimize deformation under bending stresses
  • Rubber seals to retain lubricant and for protection against contaminants
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Package Dimensions: 1.5 x 2.3 x 2.5 inches (3.8 x 5.8 x 6.4 cm)

Amazon Price: $33.21 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 24 hours
List Price: $53.77

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

McGill CF2 Cam Follower, Standard Stud, Unsealed/Slotted, Inch, Steel, 2" Roller Diameter, 1-1/4" Roller Width, 2" Stud Length, 7/8" Thread Size, 3-9/32" Overall Length, 0.875" Stud Diameter

Model: MCG-2200100000   |    Mpn: CF2   |    Ean: 0726166037178   |    PartNumber: CF2   |   Asin: B0071AP7UA

This McGill CF Camrol series steel stud-type cam follower bearing with lip seals and a screwdriver slot supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a threaded stud-type design for through-hole or threaded mounting, with a screwdriver slot on the flange end for keeping the stud from turning while tightening the mounting nut. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. The CF series cam follower includes lubrication holes on both ends of the stud and through a cross-drilled hole in the stud shank. Cam followers with an outer diameter size of 11/16 inches or smaller can be relubricated only through the flange end of the stud. All McGill inch stud-type cam followers include an oil hole plug for closing off each unused hole to help prevent contamination. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY, and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications
  • Stud-type design with a screwdriver slot for through-hole or threaded mounting
  • Thick outer ring helps minimize deformation under bending stresses
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Black oxide- treated bearing steel for durability and corrosion resistance
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Package Dimensions: 2.4 x 2.4 x 3.6 inches (6.1 x 6.1 x 9.1 cm)

Amazon Price: $21.00 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 1-2 business days
List Price: $21.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

McGill CYR1 3/8S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/8" Roller Diameter, 3/4" Roller Width, 3/8" Inner Diameter, 13/16" Overall Width, 0.98" Endplate Diameter

Model: CYR 1 3/8 S   |    Mpn: CYR1 3/8S   |    Ean: 0726166056902   |    PartNumber: CYR1 3/8S   |   Asin: B0071AQDU8

This McGill CYR series yoke-type cam follower bearing with lip seals supports high static and dynamic loads in cam-type applications. This precision cam roller has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a yoke-type design for use with heavier loads or where clevis or shaft mounting is preferred. This cam follower is made of bearing steel treated with black oxide for corrosion resistance. The working surfaces of the inner raceway and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Seals at each end retain lubricant and protect against contaminants. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam-type applications
  • Black oxide-treated bearing steel for durability and corrosion resistance
  • Yoke-type rollers for use with heavier loads or where clevis mounting is preferred
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Double seals to retain lubricant and protect against contaminants
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Package Dimensions: 1.1 x 1.8 x 1.8 inches (2.8 x 4.6 x 4.6 cm)

Amazon Price: $18.12 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 2-3 business days
List Price: $18.12

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

McGill CF1 1/8SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1-1/8" Roller Diameter, 5/8" Roller Width, 1" Stud Length, 7/16" Thread Size, 1-21/32" Overall Length, 0.438" Stud Diameter

Model: MCG-2110112000   |    Mpn: CF1 1/8SB   |    Ean: 0726166033910   |    PartNumber: CF1 1/8SB   |   Asin: B0071APPIE

This McGill CF Camrol series steel stud-type cam follower bearing with lip seals and a hexagonal hole supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a threaded stud-type design for through-hole or threaded mounting, and a hexagonal hole on the flange end that provides greater holding power during mounting than a screwdriver slot. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Moly-filled nylon lip seals (Lubri-Disc) on both sides of the bearing retain lithium base grease applied at manufacture and help protect against contaminants. The seals also vent excess grease to help prevent seal blowout during relubrication and have a continuous operating temperature range from -29 to +121 degrees C. The CF series cam follower includes lubrication holes on both ends of the stud and through a cross-drilled hole in the stud shank. Cam followers with an outer diameter size of 11/16 inches or smaller can be relubricated only through the flange end of the stud. All McGill inch stud-type cam followers include an oil hole plug for closing off each unused hole to help prevent contamination. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY, and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications
  • Stud-type design with a hexagonal socket for through-hole or threaded mounting
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Nylon lip seals help retain lubricant and prevent contamination
  • Black oxide- treated bearing steel for durability and corrosion resistance
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Package Dimensions: 1.5 x 2 x 2.5 inches (3.8 x 5.1 x 6.4 cm)

First Available: 2017-11-25

Amazon Price: $10.09 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 24 hours
List Price: $10.09

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

BQLZR 22mm Dia KR22 Stud Type Track Cam Follower Needle Roller Bearing M10 Male Thread Pack of 2

Model: N01005   |    Mpn: N01005   |    Ean: 0751570417841   |    PartNumber: N01005   |   Asin: B01C6V6YIC

Note: The color of the item may vary slightly due to photography and your own computer
Features:
Male Thread type, with a cylindrical roller, have higher load capacity.
It particularly suitable for the occasions when the radial space is limited.
Made of high grade bearing steel, more durable and longer working life.

Material: Bearing Steel
Main Color: Silver and Black
Type: KR22
Roller Diameter: 22mm/0.87"
Roller Thickness: 12mm/0.47"
Screw Thread: M10 x 1.25
Hex Nut Outer Diameter: 17mm/0.67"
Shank Diameter: 10mm/0.39"
Size: 36.3mm x 22mm/1.43" x 0.87"(L x Dia)
Weight: 114g

Package Include:
2 x Cam Follower Needle Roller Bearing

Features

  • It particularly suitable for the occasions when the radial space is limited.
  • Made of high grade bearing steel, more durable and longer working life.
  • Male Thread type, with a cylindrical roller, have higher load capacity.
  • Roller Diameter: 22mm/0.87
  • Shank Diameter: 10mm/0.39
  • See more on Amazon...

Brand: BQLZR   |   Manufacturer: BQLZR

Package Dimensions: 2 x 2 x 4 inches (5.1 x 5.1 x 10.2 cm)

Amazon Price: $8.00 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 24 hours
List Price: $8.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Koyo CRSB-8 Track Roller, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1/2" Roller Diameter, 0.344" Roller Width, 1/2" Stud Length, #10 Thread Size, 7/8" Overall Length, 0.190" Stud Diameter

Model: CRSB-8   |    Mpn: CRSB-8   |    Ean: 0605790194535   |    PartNumber: CRSB-8   |   Asin: B0071AQAOM

This Koyo steel stud-type track roller bearing with a hexagonal hole and lip seals handles moderate radial and shock loads in cam- and track-type applications. This track roller bearing, also called a cam follower, has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a non-separable, threaded stud-type design for through-hole or threaded mounting, and a hexagonal hole on the flange end that provides greater holding power during mounting than a screwdriver slot. This track roller is made of bearing steel treated with black oxide for corrosion protection, and holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Lip seals on both sides of the bearing retain grease applied at manufacture and help protect against contaminants, and internal thrust washers made of self-lubricating resin help reduce sliding friction. Its operating temperatures range from -30 to +110 degrees C. Depending on size, inch series track rollers with a hexagonal socket can be lubricated through the threaded end of the stud using a standard nominal inch drive-type grease lubrication fitting, through a cross-drilled hole in the shank, or through the hexagonal socket on the stud head. (Sizes 8 to 10.1 inches cannot be relubricated.) All stud-type track rollers come with lubrication fitting plugs for closing off unused holes. This track roller bearing meets American National Standards Institute/American Bearing Manufacturers Association (ANSI/ABMA) standard 18.2 for quality assurance and is suitable for use in a broad range of applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Specifications Sizes 8 10.1 No grease hole Size 12 and larger Relubrication through the threaded end of the stud and a cross-drilled hole in the stud shank. Sizes 12 22 Relubrication through both stud ends and through a cross-drilled hole in the stud shank. Sizes 48 64 Relubrication through both stud ends and a cross-drilled hole in the stud shank. Lubrication fittings for the axial hole in the stud head hex slot are included with the track roller.
Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

Koyo Bearings USA manufactures bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009 and headquartered in Canton, OH, meets International Organization for Standardization Technical Specification (ISO/TS) standard 16949 and ISO standard 14001.

Features

  • Track roller bearing with needle rollers supports moderate radial and shock loads in cam- and track-type applications
  • Stud-type design with a hexagonal socket for through-hole or threaded mounting
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Lip seals help retain lubricant and prevent contamination
  • Meets ANSI/ABMA standard 18.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Package Dimensions: 0.9 x 1.8 x 1.9 inches (2.3 x 4.6 x 4.8 cm)

Amazon Price: $9.95 | as of 10/18/2019(11:16am pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

McGill CYR1 3/4 S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2" Inner Diameter, 1-1/16" Overall Width, 1.25" Endplate Diameter

Model: MCG-4160110000   |    Mpn: CYR1 3/4 S   |    Ean: 0726166057213   |    PartNumber: CYR1 3/4 S   |   Asin: B0071AQESE

This McGill CYR series yoke-type cam follower bearing with lip seals supports high static and dynamic loads in cam-type applications. This precision cam roller has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a yoke-type design for use with heavier loads or where clevis or shaft mounting is preferred. This cam follower is made of bearing steel treated with black oxide for corrosion resistance. The working surfaces of the inner raceway and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Seals at each end retain lubricant and protect against contaminants. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam-type applications
  • Black oxide-treated bearing steel for durability and corrosion resistance
  • Yoke-type rollers for use with heavier loads or where clevis mounting is preferred
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Double seals to retain lubricant and protect against contaminants
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Item Dimensions: 3 x 2 x 3 inches (7.6 x 5.1 x 7.6 cm)   |   Package Dimensions: 1.5 x 2.4 x 2.4 inches (3.8 x 6.1 x 6.1 cm)

Amazon Price: $57.94 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 24 hours
List Price: $57.94

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

McGill CF2SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 2" Roller Diameter, 1-1/4" Roller Width, 2" Stud Length, 7/8" Thread Size, 3-9/32" Overall Length, 0.875" Stud Diameter

Model: MCG-2200112000   |    Mpn: CF2SB   |    Ean: 0726166037338   |    PartNumber: CF2SB   |   Asin: B0071APT08

This McGill CF Camrol series steel stud-type cam follower bearing with lip seals and a hexagonal hole supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a threaded stud-type design for through-hole or threaded mounting, and a hexagonal hole on the flange end that provides greater holding power during mounting than a screwdriver slot. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Moly-filled nylon lip seals (Lubri-Disc) on both sides of the bearing retain lithium base grease applied at manufacture and help protect against contaminants. The seals also vent excess grease to help prevent seal blowout during relubrication and have a continuous operating temperature range from -29 to +121 degrees C. The CF series cam follower includes lubrication holes on both ends of the stud and through a cross-drilled hole in the stud shank. Cam followers with an outer diameter size of 11/16 inches or smaller can be relubricated only through the flange end of the stud. All McGill inch stud-type cam followers include an oil hole plug for closing off each unused hole to help prevent contamination. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY, and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications
  • Stud-type design with a hexagonal socket for through-hole or threaded mounting
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Nylon lip seals help retain lubricant and prevent contamination
  • Black oxide- treated bearing steel for durability and corrosion resistance
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Item Dimensions: 18 x 16 x 23 inches (45.7 x 40.6 x 58.4 cm)   |   Package Dimensions: 2.4 x 2.4 x 3.6 inches (6.1 x 6.1 x 9.1 cm)

Amazon Price: $44.91 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 2-3 business days
List Price: $44.91 | Used Price: $28.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

McGill CF7/8S Cam Follower, Standard Stud, Sealed/Slotted, Inch, Steel, 7/8" Roller Diameter, 1/2" Roller Width, 7/8" Stud Length, 3/8" Thread Size, 1-13/32" Overall Length, 0.375" Stud Diameter

Model: CF-7/8-S   |    Mpn: CF7/8S   |    Ean: 0726166032586   |    PartNumber: CF7/8S   |   Asin: B0071APCOQ

This McGill CF Camrol series steel stud-type cam follower bearing with lip seals and a screwdriver slot supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a threaded stud-type design for through-hole or threaded mounting, with a screwdriver slot on the flange end for keeping the stud from turning while tightening the mounting nut. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Moly-filled nylon lip seals (Lubri-Disc) on both sides of the bearing retain lithium base grease applied at manufacture and help protect against contaminants. The seals also vent excess grease to help prevent seal blowout during relubrication and have a continuous operating temperature range from -29 to +121 degrees C. The CF series cam follower includes lubrication holes on both ends of the stud and through a cross-drilled hole in the stud shank. Cam followers with an outer diameter size of 11/16 inches or smaller can be relubricated only through the flange end of the stud. All McGill inch stud-type cam followers include an oil hole plug for closing off each unused hole to help prevent contamination. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY, and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications
  • Stud-type design with a screwdriver slot for through-hole or threaded mounting
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Nylon lip seals help retain lubricant and prevent contamination
  • Black oxide- treated bearing steel for durability and corrosion resistance
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Item Dimensions: 2 x 6 x 8 inches (5.1 x 15.2 x 20.3 cm)   |   Package Dimensions: 1 x 1.8 x 1.8 inches (2.5 x 4.6 x 4.6 cm)

First Available: 2017-05-15

Amazon Price: $9.95 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 2-3 business days
List Price: $9.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

McGill CCF4SB Cam Follower, Crowned, Sealed, Inch, Steel, 4" Roller Diameter, 2-1/4" Roller Width, 3-1/2" Stud Length, 1-1/2" Thread Size, 5-25/32" Overall Length, 1.500" Stud Diameter

Model: MCG-2401112000   |    Mpn: CCF4SB   |    Ean: 0726166040369   |    PartNumber: CCF4SB   |   Asin: B0071AQKFQ

This McGill CF Camrol series steel stud-type cam follower bearing with a crowned outer surface and lip seals supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. The surface of the outer ring is contoured to help evenly distribute loads when misalignments occur. The cam follower has a threaded stud-type design for through-hole or threaded mounting, and a hexagonal hole on the flange end that provides greater holding power during mounting than a screwdriver slot. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Moly-filled nylon lip seals (Lubri-Disc) on both sides of the bearing retain lithium base grease applied at manufacture and help protect against contaminants. The seals also vent excess grease to help prevent seal blowout during relubrication and have a continuous operating temperature range from -29 to +121 degrees C. The CF series cam follower includes lubrication holes on both ends of the stud and a cross-drilled hole in the stud shank. Cam followers with an outside diameter size of 11/16 inches or smaller can be relubricated only through the flange end of the stud. All McGill inch stud-type cam followers include an oil hole plug for closing off each unused hole to help prevent contamination. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY, and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications
  • Stud-type design with a hexagonal socket for through-hole or threaded mounting
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Nylon lip seals help retain lubricant and prevent contamination
  • Crowned outer surface optimizes the distribution of contact stress
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Package Dimensions: 4.1 x 4.2 x 6.1 inches (10.4 x 10.7 x 15.5 cm)

Amazon Price: $113.08 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 1-2 business days
List Price: $113.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Koyo CRS-10-1 Track Roller, Standard Stud, Sealed/Slotted, Inch, Steel, 5/8" Roller Diameter, 0.438" Roller Width, 3/4" Stud Length, 1/4" Thread Size, 1.219" Overall Length, 0.250" Stud Diameter

Model: CRS-10-1   |    Mpn: CRS-10-1   |    Ean: 0605790207105   |    PartNumber: CRS-10-1   |   Asin: B0071AQ3V2

This Koyo steel stud-type track roller bearing with a screwdriver slot and lip seals handles moderate radial and shock loads in cam- and track-type applications. This track roller bearing, also called a cam follower, has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a nonseparable, threaded stud-type design for through-hole or threaded mounting, a screwdriver slot on the flange end that helps keep the stud from turning while tightening the mounting nut. This track roller is made of bearing steel treated with black oxide for corrosion protection. Lip seals on both sides of the bearing retain grease applied at manufacture and help protect against contaminants, and internal thrust washers made of self-lubricating resin help reduce sliding friction. Its operating temperatures range from -30 to +110 degrees C. All inch-series stud-type track rollers with a screwdriver slot can be relubricated through the flanged end of the stud. Sizes 12 and larger can also be relubricated through the threaded end of the stud and through a cross-drilled hole in the stud shank. Both stud ends accept a standard nominal inch drive-type grease lubrication fitting (not included). All stud-type track rollers come with lubrication fitting plugs for closing off unused holes. This track roller bearing meets American National Standards Institute/American Bearing Manufacturers Association (ANSI/ABMA) standard 18.2 for quality assurance and is suitable for use in a broad range of applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

Koyo Bearings USA manufactures bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009 and headquartered in Canton, OH, meets International Organization for Standardization Technical Specification (ISO/TS) standard 16949 and ISO standard 14001.

Features

  • Track roller bearing with needle rollers supports moderate radial and shock loads in cam- and track-type applications
  • Stud-type design with a screwdriver slot for through-hole or threaded mounting
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Lip seals help retain lubricant and prevent contamination
  • Meets ANSI/ABMA standard 18.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Item Dimensions: 18 x 16 x 23 inches (45.7 x 40.6 x 58.4 cm)   |   Package Dimensions: 1 x 1.8 x 1.9 inches (2.5 x 4.6 x 4.8 cm)

Amazon Price: $9.95 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 24 hours
List Price: $24.73 | Used Price: $14.28

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

uxcell CF12 Cam Follower KR30 Needle Roller Bearing, 30mm Roller Diameter, 14mm Roller Width, M12 Standard Stud

 PartNumber: a19052200ux0511   |   Asin: B07W992LBK


Description: -A cam follower, also known as a track follower, is a specialized type of roller or needle bearing designed to follow cam lobe profiles. -The thick-walled outer ring enables high radial loads, while reducing distortion and bending stresses. -The stud type follower replaced using a standard bearing and bolt. They are easier to use and could also handle higher loads. -Cam followers bearings have high rigidity and accuracy as follower bearings for the cam mechanism and straight line movement, and they are used in a broad range of fields such as machine tools, industrial robots, electronic parts machinery. -Cam followers are used as a guide roller for cam mechanisms or linear motion.
Specification Model: CF12 (KR30) Bearing Material: GCr15 Steel Cage Material: Mild Steel Roller Diameter: 30mm Roller Width: 14mm Stud Diameter: 12mm Stud Length: 25mm Thread Size: M12x1.5mm Thread Length: 13mm Overall Length (Max.): 40.2mm Dynamic Load Rating (Cr): 0.59kN Static Load Rating (Cor): 0.45kN Limited Speed: 14000 rpm

Features

  • CF12 (KR30) (Roller Dia.: 30mm; Roller Width: 14mm; Stud Diameter: 12mm; Thread Size: M12x1.5mm)
  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications
  • Made of high rigidity bearing steel, more durable and longer working life
  • Solid sealed. Preventing the entry of foreign matters like dust, this would extend the life of needle roller bearing
  • It particularly suitable for the occasions when the radial space is limited
  • See more on Amazon...

Brand: uxcell   |   Manufacturer: uxcell

Package Dimensions: 1.34 x 3.7 x 6.54 inches (3.4 x 9.4 x 16.6 cm)

Amazon Price: $8.05 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 1-2 business days
List Price: $8.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

McGill CFH1/2S Cam Follower, Heavy Stud, Sealed/Slotted, Inch, Steel, 1/2" Roller Diameter, 3/8" Roller Width, 5/8" Stud Length, 1/4" Thread Size, 1-1/32" Overall Length, 1/4" Stud Diameter

Model: MCG-2020510000   |    Mpn: CFH1/2S   |    Ean: 0726166029999   |    PartNumber: CFH1/2S   |   Asin: B0071AQS4O

This McGill CF Camrol series steel heavy-duty stud-type cam follower bearing with lip seals and a screwdriver slot supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. Its heavy-duty integral stud with a large diameter supports heavier static loads than standard studs while exhibiting minimal stud deflection. The screwdriver slot on the flange helps keep the stud from turning while tightening the mounting nut. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to support contact stresses from the rolling elements, while the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Moly-filled nylon lip seals (Lubri-Disc) on both sides of the bearing retain lithium base grease applied at manufacture and help protect against contaminants. The seals also vent excess grease to help prevent seal blowout during relubrication and have a continuous operating temperature range from -29 to +121 degrees C. The CF series cam follower includes lubrication holes on both ends of the stud and through a cross-drilled hole in the stud shank. Cam followers with an outer diameter size of 11/16 inches or smaller can be relubricated only through the flange end of the stud. All McGill inch stud-type cam followers include an oil hole plug for closing off each unused hole to help prevent contamination. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY, and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications
  • Heavy-duty stud-type design with a screwdriver slot supports heavier static loads than a standard stud
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Nylon lip seals help retain lubricant and prevent contamination
  • Black oxide- treated bearing steel for durability and corrosion resistance
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Item Dimensions: 18 x 16 x 23 inches (45.7 x 40.6 x 58.4 cm)   |   Package Dimensions: 1 x 1.8 x 1.9 inches (2.5 x 4.6 x 4.8 cm)

Amazon Price: $8.04 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 24 hours
List Price: $20.57 | Used Price: $13.37

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

INA NUTR35 Track Roller, Yoke Type, Unsealed, Metric, Steel, 72mm Roller Diameter, 28mm Roller Width, 35mm Inner Diameter, 29mm Overall Width

Model: INA-NUTR35   |    Mpn: NUTR35   |    Ean: 4012802422351   |    PartNumber: NUTR35   |   Asin: B0071AQ9S4

This INA NUTR series yoke-type track roller bearing has a straight cylindrical outer ring shape and is suitable for supporting high static and dynamic loads in track-type applications. The straight outer ring provides additional surface area to improve load distribution and the yoke-type design is appropriate for heavier loads or where clevis or shaft mounting is preferred. A thick-walled outer ring helps minimize deformation under heavy radial and shock loads. This track roller has two rows of cylindrical roller bearings held in place by metal support rings. The roller is unsealed for applications in which contamination is not a factor. This track roller is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

INA manufactures bearings for automotive and industrial applications. The company, founded in 1946 in Germany, meets International Organization for Standardization (ISO) standards 9001:2008 and TS 16949:2009.

Features

  • Track roller with double-row cylindrical roller bearings supports high static and dynamic loads in track-type applications
  • Straight outer ring for increased load distribution
  • Full complement of bearings for higher radial load capacity than caged rollers
  • Thick outer ring helps minimize deformation under bending stresses
  • Unsealed for applications where contamination is not a factor
  • See more on Amazon...

Brand: INA   |   Manufacturer: INA

Item Dimensions: 3.8 x 1.7 x 3.8 inches (9.7 x 4.3 x 9.7 cm)   |   Package Dimensions: 1.7 x 3.8 x 3.9 inches (4.3 x 9.7 x 9.9 cm)

Amazon Price: $106.20 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 1-2 business days
List Price: $106.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Koyo CR-10-1 Track Roller, Standard Stud, Unsealed/Slotted, Inch, Steel, 5/8" Roller Diameter, 0.438" Roller Width, 3/4" Stud Length, 1/4" Thread Size, 1.219" Overall Length, 0.250" Stud Diameter

Model: CR-10-1   |    Mpn: CR-10-1   |    Ean: 0605790194429   |    PartNumber: CR-10-1   |   Asin: B0071APW78

This Koyo steel stud-type track roller bearing with a screwdriver slot and lip seals handles moderate radial and shock loads in cam- and track-type applications. This track roller bearing, also called a cam follower, has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a non-separable, threaded stud-type design for through-hole or threaded mounting, a screwdriver slot on the flange end that helps keep the stud from turning while tightening the mounting nut, and a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. This track roller is made of bearing steel treated with black oxide for corrosion protection. Its operating temperatures range from -30 to +110 degrees C. All inch-series stud-type track rollers with a screwdriver slot can be relubricated through the flanged end of the stud. Sizes 12 and larger can also be relubricated through the threaded end of the stud and through a cross-drilled hole in the stud shank. Both stud ends accept a standard nominal inch drive-type grease lubrication fitting (not included). All Stud-type track rollers come with lubrication fitting plugs for closing off unused holes. This track roller bearing meets American National Standards Institute/American Bearing Manufacturers Association (ANSI/ABMA) standard 18.2 for quality assurance and is suitable for use in a broad range of applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

Koyo Bearings USA manufactures bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009 and headquartered in Canton, OH, meets International Organization for Standardization Technical Specification (ISO/TS) standard 16949 and ISO standard 14001.

Features

  • Track roller bearing with needle rollers supports moderate radial and shock loads in cam- and track-type applications
  • Stud-type design with a screwdriver slot for through-hole or threaded mounting
  • Thick outer ring helps minimize deformation under bending stresses
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Meets ANSI/ABMA standard 18.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Package Dimensions: 0.9 x 1.8 x 1.9 inches (2.3 x 4.6 x 4.8 cm)

Amazon Price: $9.95 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 2-3 business days
List Price: $9.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

McGill CF2 1/4SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 2-1/4" Roller Diameter, 1-1/4" Roller Width, 2" Stud Length, 7/8" Thread Size, 3-9/32" Overall Length, 0.875" Stud Diameter

Model: MCG-2220112000   |    Mpn: CF2 1/4SB   |    Ean: 0726166037932   |    PartNumber: CF2 1/4SB   |   Asin: B0071APTBW

This McGill CF Camrol series steel stud-type cam follower bearing with lip seals and a hexagonal hole supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a threaded stud-type design for through-hole or threaded mounting, and a hexagonal hole on the flange end that provides greater holding power during mounting than a screwdriver slot. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Moly-filled nylon lip seals (Lubri-Disc) on both sides of the bearing retain lithium base grease applied at manufacture and help protect against contaminants. The seals also vent excess grease to help prevent seal blowout during relubrication and have a continuous operating temperature range from -29 to +121 degrees C. The CF series cam follower includes lubrication holes on both ends of the stud and through a cross-drilled hole in the stud shank. Cam followers with an outer diameter size of 11/16 inches or smaller can be relubricated only through the flange end of the stud. All McGill inch stud-type cam followers include an oil hole plug for closing off each unused hole to help prevent contamination. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY, and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications
  • Stud-type design with a hexagonal socket for through-hole or threaded mounting
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Nylon lip seals help retain lubricant and prevent contamination
  • Black oxide- treated bearing steel for durability and corrosion resistance
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Item Dimensions: 18 x 16 x 23 inches (45.7 x 40.6 x 58.4 cm)   |   Package Dimensions: 2.3 x 2.4 x 3.5 inches (5.8 x 6.1 x 8.9 cm)

Amazon Price: $84.08 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 5 to 7 days
List Price: $84.08 | Used Price: $17.24

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

McGill CYR1 1/8S Cam Yoke Roller, Sealed, Inch, Steel, 1-1/8" Roller Diameter, 5/8" Roller Width, 5/16" Inner Diameter, 11/16" Overall Width, 0.78" Endplate Diameter

Model: MCG-4110110000   |    Mpn: CYR1 1/8S   |    Ean: 0726166056643   |    PartNumber: CYR1 1/8S   |   Asin: B0071AQD80

This McGill CYR series yoke-type cam follower bearing with lip seals supports high static and dynamic loads in cam-type applications. This precision cam roller has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a yoke-type design for use with heavier loads or where clevis or shaft mounting is preferred. This cam follower is made of bearing steel treated with black oxide for corrosion resistance. The working surfaces of the inner raceway and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Seals at each end retain lubricant and protect against contaminants. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam-type applications
  • Black oxide-treated bearing steel for durability and corrosion resistance
  • Yoke-type rollers for use with heavier loads or where clevis mounting is preferred
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Double seals to retain lubricant and protect against contaminants
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Package Dimensions: 1.2 x 1.8 x 1.8 inches (3.0 x 4.6 x 4.6 cm)

Amazon Price: $37.17 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 24 hours
List Price: $37.17

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

McGill CF1 1/2SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1-1/2" Roller Diameter, 7/8" Roller Width, 1-1/2" Stud Length, 5/8" Thread Size, 2-13/32" Overall Length, 0.625" Stud Diameter

 Ean: 0726166035471   |    PartNumber: CF1 1/2SB   |   Asin: B0071APQXS

This McGill CF Camrol series steel stud-type cam follower bearing with lip seals and a hexagonal hole supports high static and dynamic loads in cam- and track-type applications. This precision cam follower has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a threaded stud-type design for through-hole or threaded mounting, and a hexagonal hole on the flange end that provides greater holding power during mounting than a screwdriver slot. The inner stud has inch threads manufactured to class 2 tolerances. This cam follower is made of bearing steel treated with black oxide for corrosion protection. The working surfaces of the inner raceways and flange are zone-hardened to support contact stresses from the rolling elements, and the inner ring is ductile to help absorb shock loads. The bearing holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Moly-filled nylon lip seals (Lubri-Disc) on both sides of the bearing retain lithium base grease applied at manufacture and help protect against contaminants. The seals also vent excess grease to help prevent seal blowout during relubrication and have a continuous operating temperature range from -29 to +121 degrees C. The CF series cam follower includes lubrication holes on both ends of the stud and through a cross-drilled hole in the stud shank. Cam followers with an outer diameter size of 11/16 inches or smaller can be relubricated only through the flange end of the stud. All McGill inch stud-type cam followers include an oil hole plug for closing off each unused hole to help prevent contamination. This cam follower is suitable for use in a broad range of linear and motion translation applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

McGill manufactures bearings for aerospace and industrial applications. The company, founded in 1905, is headquartered in Florence, KY, and meets International Organization for Standardization (ISO) standard 9001:2008 and Society of Automotive Engineers (SAE) aerospace standard AS9100 for quality assurance.

Features

  • Cam follower with needle rollers supports high static and dynamic loads in cam- and track-type applications
  • Stud-type design with a hexagonal socket for through-hole or threaded mounting
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Nylon lip seals help retain lubricant and prevent contamination
  • Black oxide- treated bearing steel for durability and corrosion resistance
  • See more on Amazon...

Brand: McGill   |   Manufacturer: McGill

Item Dimensions: 18 x 16 x 23 inches (45.7 x 40.6 x 58.4 cm)   |   Package Dimensions: 1.7 x 1.8 x 2.7 inches (4.3 x 4.6 x 6.9 cm)

Amazon Price: $47.00 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 24 hours
List Price: $50.90

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Koyo CRSB-26 Track Roller, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1-5/8" Roller Diameter, 0.875" Roller Width, 1-1/2" Stud Length, 5/8" Thread Size, 2-13/32" Overall Length, 0.625" Stud Diameter

 Ean: 0605790207143   |    PartNumber: CRSB-26   |   Asin: B0071AQE7A

This Koyo steel stud-type track roller bearing with a hexagonal hole and lip seals handles moderate radial and shock loads in cam- and track-type applications. This track roller bearing, also called a cam follower, has a thick-walled outer ring that helps minimize deformation under heavy radial and shock loads. It has a non-separable, threaded stud-type design for through-hole or threaded mounting, and a hexagonal hole on the flange end that provides greater holding power during mounting than a screwdriver slot. This track roller is made of bearing steel treated with black oxide for corrosion protection, and holds a full complement of needle rollers for a higher radial load-carrying capacity than caged rollers. Lip seals on both sides of the bearing retain grease applied at manufacture and help protect against contaminants, and internal thrust washers made of self-lubricating resin help reduce sliding friction. Its operating temperatures range from -30 to +110 degrees C. Depending on size, inch series track rollers with a hexagonal socket can be lubricated through the threaded end of the stud using a standard nominal inch drive-type grease lubrication fitting, through a cross-drilled hole in the shank, or through the hexagonal socket on the stud head. (Sizes 8 to 10.1 inches cannot be relubricated.) All stud-type track rollers come with lubrication fitting plugs for closing off unused holes. This track roller bearing meets American National Standards Institute/American Bearing Manufacturers Association (ANSI/ABMA) standard 18.2 for quality assurance and is suitable for use in a broad range of applications including process transfer lines, ram support rollers, conveyors, machine tools, and indexing equipment, among others.

Specifications Sizes 8 10.1 No grease hole Size 12 and larger Relubrication through the threaded end of the stud and a cross-drilled hole in the stud shank. Sizes 12 22 Relubrication through both stud ends and through a cross-drilled hole in the stud shank. Sizes 48 64 Relubrication through both stud ends and a cross-drilled hole in the stud shank. Lubrication fittings for the axial hole in the stud head hex slot are included with the track roller.
Track runner bearings, also called track roller bearings, are rolling element bearings with a thick-walled outer ring that rotates directly on cam and track surfaces. The thick outer ring helps minimize deformation under load stress and enables the bearing to handle heavy rolling and shock loads. Track runner bearings have either a stud-type or yoke-type mounting design. Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers, are mounted in a yoke-style housing on a press-fitted or push-fitted shaft or pin. Available in a variety of materials and mounting configurations, track runner bearings are used in a broad range of cam-controlled and linear motion applications including agricultural machinery, conveying equipment, cam drives, material handling equipment, robotics, and automotive equipment, among others.

Koyo Bearings USA manufactures bearings, bearing assemblies, and needle rollers for automotive and industrial applications. The company, founded in 2009 and headquartered in Canton, OH, meets International Organization for Standardization Technical Specification (ISO/TS) standard 16949 and ISO standard 14001.

Features

  • Track roller bearing with needle rollers supports moderate radial and shock loads in cam- and track-type applications
  • Stud-type design with a hexagonal socket for through-hole or threaded mounting
  • Full complement of rollers for higher radial load capacity than caged rollers
  • Lip seals help retain lubricant and prevent contamination
  • Meets ANSI/ABMA standard 18.2 for quality assurance
  • See more on Amazon...

Brand: Koyo   |   Manufacturer: Koyo Torrington

Package Dimensions: 1.7 x 1.8 x 2.7 inches (4.3 x 4.6 x 6.9 cm)

Amazon Price: $33.70 | as of 10/18/2019(11:16am pst)
Availibility: Usually ships in 1-2 business days
List Price: $33.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. McGill FCF5 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 5" Roller Diameter, 3" Roller Width, 4-...
  2. Koyo YCRS-28 Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2" Inner D...
  3. McGill CF2 Cam Follower, Standard Stud, Unsealed/Slotted, Inch, Steel, 2" Roller Diameter, 1-1/4" Ro...
  4. McGill CYR1 3/8S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/8" Roller Diameter, 3/4" Roller Width, 3/...
  5. McGill CF1 1/8SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1-1/8" Roller Diameter, ...
  6. BQLZR 22mm Dia KR22 Stud Type Track Cam Follower Needle Roller Bearing M10 Male Thread Pack of 2
  7. Koyo CRSB-8 Track Roller, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1/2" Roller Diameter, 0.344" ...
  8. McGill CYR1 3/4 S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2...
  9. McGill CF2SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 2" Roller Diameter, 1-1/4" R...
  10. McGill CF7/8S Cam Follower, Standard Stud, Sealed/Slotted, Inch, Steel, 7/8" Roller Diameter, 1/2" R...

Most Wished For

  1. McGill FCF5 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 5" Roller Diameter, 3" Roller Width, 4-...
  2. Koyo YCRS-28 Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2" Inner D...
  3. McGill CF2 Cam Follower, Standard Stud, Unsealed/Slotted, Inch, Steel, 2" Roller Diameter, 1-1/4" Ro...
  4. McGill CYR1 3/8S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/8" Roller Diameter, 3/4" Roller Width, 3/...
  5. McGill CF1 1/8SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1-1/8" Roller Diameter, ...
  6. BQLZR 22mm Dia KR22 Stud Type Track Cam Follower Needle Roller Bearing M10 Male Thread Pack of 2
  7. Koyo CRSB-8 Track Roller, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1/2" Roller Diameter, 0.344" ...
  8. McGill CYR1 3/4 S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2...
  9. McGill CF2SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 2" Roller Diameter, 1-1/4" R...
  10. McGill CF7/8S Cam Follower, Standard Stud, Sealed/Slotted, Inch, Steel, 7/8" Roller Diameter, 1/2" R...

Most Gifted

  1. McGill FCF5 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 5" Roller Diameter, 3" Roller Width, 4-...
  2. Koyo YCRS-28 Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2" Inner D...
  3. McGill CF2 Cam Follower, Standard Stud, Unsealed/Slotted, Inch, Steel, 2" Roller Diameter, 1-1/4" Ro...
  4. McGill CYR1 3/8S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/8" Roller Diameter, 3/4" Roller Width, 3/...
  5. McGill CF1 1/8SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1-1/8" Roller Diameter, ...
  6. BQLZR 22mm Dia KR22 Stud Type Track Cam Follower Needle Roller Bearing M10 Male Thread Pack of 2
  7. Koyo CRSB-8 Track Roller, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1/2" Roller Diameter, 0.344" ...
  8. McGill CYR1 3/4 S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2...
  9. McGill CF2SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 2" Roller Diameter, 1-1/4" R...
  10. McGill CF7/8S Cam Follower, Standard Stud, Sealed/Slotted, Inch, Steel, 7/8" Roller Diameter, 1/2" R...

Top Selling

  1. McGill FCF5 TRAKROL Bearing, Stud Type, Sealed, Inch, Steel, 5" Roller Diameter, 3" Roller Width, 4-...
  2. Koyo YCRS-28 Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2" Inner D...
  3. McGill CF2 Cam Follower, Standard Stud, Unsealed/Slotted, Inch, Steel, 2" Roller Diameter, 1-1/4" Ro...
  4. McGill CYR1 3/8S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/8" Roller Diameter, 3/4" Roller Width, 3/...
  5. McGill CF1 1/8SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1-1/8" Roller Diameter, ...
  6. BQLZR 22mm Dia KR22 Stud Type Track Cam Follower Needle Roller Bearing M10 Male Thread Pack of 2
  7. Koyo CRSB-8 Track Roller, Standard Stud, Sealed/Hex Hole, Inch, Steel, 1/2" Roller Diameter, 0.344" ...
  8. McGill CYR1 3/4 S Cam Yoke Roller, Sealed, Inch, Steel, 1-3/4" Roller Diameter, 1" Roller Width, 1/2...
  9. McGill CF2SB Cam Follower, Standard Stud, Sealed/Hex Hole, Inch, Steel, 2" Roller Diameter, 1-1/4" R...
  10. McGill CF7/8S Cam Follower, Standard Stud, Sealed/Slotted, Inch, Steel, 7/8" Roller Diameter, 1/2" R...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical