Frontpage > Industrial > Raw Materials > Aluminum Shims & Shim Stock

Best Aluminum Shims & Shim Stock - Buying Guide

Last Updated: 11/21/2018

Share on

Bestselling Aluminum Shims & Shim Stock on Amazon

  1. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.010" Thick, 6" Width, 100" Length
  2. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.002" Thick, 6" Width, 100" Length
  3. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.001" Thick, 6" Width, 100" Length
  4. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.008" Thick, 6" Width, 100" Length
  5. 1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.016" Thick, 24" Width, 24" Length, 0.003" Lamina...
  6. 5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.016" Thickness, 1" ...
  7. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.006" Thick, 6" Width, 100" Length
  8. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.005" Thick, 6" Width, 100" Length
  9. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.004" Thick, 6" Width, 100" Length
  10. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.005" Thick, 6" Width, 100" Length

  #1

1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.010" Thick, 6" Width, 100" Length

Model: PB0.254AS69450   |    Mpn: 69450   |    Ean: 0698158694501   |    PartNumber: 69450   |   Asin: B00065UZUO

Precision Brand Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

Features

  • Made from a H-18 full hard, tempered aluminum
  • Used in many applications, frequently in electrical and chemical fields
  • Lightweight with excellent corrosion resistance, workability and weldability
  • High thermal and electrical conductivity
  • Measures 6 wide by 100 long by 0.010 thick
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Precision Brand Products, Inc.

Package Dimensions: 3 x 3.2 x 7 inches (7.6 x 8.1 x 17.8 cm)

Amazon Price: $30.95 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $56.17

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.002" Thick, 6" Width, 100" Length

 PartNumber: 40002   |   Asin: B0062FO26K

This aluminum 1145 shim stock roll is cold rolled and strain-hardened to a full-hard H19 temper. It is made from aluminum 1145, a lightweight aluminum alloy that provides good electrical and thermal conductivity, resists corrosion, and is easily cold worked and formed. This shim stock is sold in rolls for cutting, stamping, milling, and shaping into shims of various sizes and shapes. It is nonmagnetic and it is not heat treatable. It complies with United States Military (MIL) standard W-85 and American Society for Testing and Materials (ASTM) standard B-209.

Cold rolling is a metal-forming process in which a sheet of material is passed between two rollers and compressed in order to reduce the thickness of the sheet. This aluminum 1145 shim stock is cold rolled, which improves the yield strength, hardness, surface quality, tolerances, and dimensional accuracy of the material. Tempered metals and alloys are either strain hardened (also referred to as cold worked) or heat treated in order to improve their toughness. This aluminum 1145 shim stock is strain hardened to a full-hard H19 temper, which means it has been reduced up to 75% through cold working for a maximum possible improvement in the strength and hardness of the material.

A shim is a thin piece of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. Shims can also be used to fill in gaps between parts that are prone to wear. Shims are used in processes such as automobile and machine tool manufacturing, construction operations, musical instrument production, and computer engineering. Shim stock is a thin sheet of metal or plastic that can be cut, sawed, stamped, milled, or bored into shims of various shapes and sizes to suit a wide range of applications. Shims can be made from almost any material, such as wood, paper, metal, stone, and plastic. However, commercial shim stock is either metal or plastic. Specific properties of shim stock, such as magnetism, hardness, temper, yield strength, chemical reactivity, corrosion resistance, and conductivity, are dependent on base materials and any finishing processes that have been applied, such as tempering, rolling, or surface treatments. Shim stock is sold in rolls or sheets of varying lengths, widths, and thicknesses. Slotted shim stock is precut for improved accuracy in alignment and leveling. Laminated shim stock is produced in sheets of stacked, pressed layers of metal foil that can be peeled apart to adjust the sheet thickness. Shim stock conforms to American Society for Testing and Materials Standards (ASTM), Society of Automobile Engineers International Standards (SAE), SAE Aerospace Materials Standards (AMS), United States Military Standards (MIL), Copper Development Association Standards (CDA), and the American Iron and Steel Institute Standards (AISI).

Features

  • Aluminum 1145 is lightweight, provides good electrical and thermal conductivity, resists corrosion, and is easily cold worked and formed
  • Cold rolling improves the yield strength and hardness of the material and provides good surface quality, tight tolerances, and accurate dimensions
  • Strain hardened to a full-hard H19 temper to improve toughness
  • Conforms to specifications MIL-W-85 and ASTM-B-209
  • Sold in rolls for cutting, stamping, milling, and shaping into shims of various sizes and shapes
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 3.7 x 3.8 x 6.7 inches (9.4 x 9.7 x 17.0 cm)

Amazon Price: $37.38 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $41.51

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.001" Thick, 6" Width, 100" Length

Model: PB0.025AS69130   |    Mpn: 69130   |    Ean: 0698158691302   |    PartNumber: 69130   |   Asin: B00065UZD6

Precision Brand Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

Features

  • Made from a H-18 full hard, tempered aluminum
  • Used in many applications, frequently in electrical and chemical fields
  • Lightweight with excellent corrosion resistance, workability and weldability
  • High thermal and electrical conductivity
  • Measures 6 wide by 100 long by 0.001 thick
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Precision Brand Products, Inc.

Package Dimensions: 3.1 x 3.2 x 7.1 inches (7.9 x 8.1 x 18.0 cm)

First Available: 2017-05-15

Amazon Price: $21.49 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $23.64

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.008" Thick, 6" Width, 100" Length

Model: PB0.203AS69395   |    Mpn: 69395   |    Ean: 0698158693955   |    PartNumber: 69395   |   Asin: B003A03KVI

Precision Brand Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

Features

  • Made from a H-18 full hard, tempered aluminum
  • Used in many applications, frequently in electrical and chemical fields
  • Lightweight with excellent corrosion resistance, workability and weldability
  • High thermal and electrical conductivity
  • Measures 6 wide by 100 long by 0.008 thick
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Precision Brand Products, Inc.

Package Dimensions: 3.1 x 3.2 x 7 inches (7.9 x 8.1 x 17.8 cm)

Amazon Price: $26.49 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $26.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.016" Thick, 24" Width, 24" Length, 0.003" Laminate Layers

 Ean: 0698158713165   |    PartNumber: 71316   |   Asin: B0036R4VUY

Precision Brand Laminated Shim is made by using pressure and resin/adhesive to bond metal shim together which creates a rigid "one piece" item that appears to function as a single solid metal sheet or plate. Remove layers by peeling away with a pocket knife to the desired thickness. Sheets may be cut, sawed, stamped, milled, or bored to almost any configuration. Bonding adhesive makes for just right peeling, no tearing or ripping of the layers. Sheets are uniform from edge to edge.

Features

  • Laminated Aluminum Shim is made from an 1100 Series Aluminum
  • Composition 1, Type 1, Class 2
  • Fully laminated
  • Peel off layers to needed thickness
  • Allows more on-site accuracy
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Precision Brand Products, Inc.

Package Dimensions: 0.1 x 24.5 x 24.5 inches (0.3 x 62.2 x 62.2 cm)

Amazon Price: $224.56 | as of 11/21/2018(6:26am pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.016" Thickness, 1" ID, 1-1/2" OD (Pack of 10)

 PartNumber: 475AL1450   |   Asin: B006U1NV0Y

The 5052 aluminum round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM B209 specifications, and has a standard tolerance. The 5052 aluminum alloy is lightweight and strong, with good corrosion resistance. It is nonmagnetic.

Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

Features

  • 5052 aluminum round shim is lightweight and strong, with good corrosion resistance
  • Unpolished (mill) surface has no finish
  • Meets ASTM B209 specifications
  • Standard tolerance
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.5 x 2 x 2 inches (1.3 x 5.1 x 5.1 cm)

Amazon Price: $3.98 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $3.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.006" Thick, 6" Width, 100" Length

Model: PB0.152AS69345   |    Mpn: 69345   |    Ean: 0698158693450   |    PartNumber: 69345   |   Asin: B003A03KV8

Precision Brand Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

Features

  • Made from a H-18 full hard, tempered aluminum
  • Used in many applications, frequently in electrical and chemical fields
  • Lightweight with excellent corrosion resistance, workability and weldability
  • High thermal and electrical conductivity
  • Measures 6 wide by 100 long by 0.006 thick
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Precision Brand Products, Inc.

Package Dimensions: 3.1 x 3.1 x 6.9 inches (7.9 x 7.9 x 17.5 cm)

Amazon Price: $23.87 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $24.30

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.005" Thick, 6" Width, 100" Length

 PartNumber: 40005   |   Asin: B0062FO3ZK

This aluminum 1145 shim stock roll is cold rolled and strain-hardened to a full-hard H19 temper. It is made from aluminum 1145, a lightweight aluminum alloy that provides good electrical and thermal conductivity, resists corrosion, and is easily cold worked and formed. This shim stock is sold in rolls for cutting, stamping, milling, and shaping into shims of various sizes and shapes. It is nonmagnetic and it is not heat treatable. It complies with United States Military (MIL) standard W-85 and American Society for Testing and Materials (ASTM) standard B-209.

Cold rolling is a metal-forming process in which a sheet of material is passed between two rollers and compressed in order to reduce the thickness of the sheet. This aluminum 1145 shim stock is cold rolled, which improves the yield strength, hardness, surface quality, tolerances, and dimensional accuracy of the material. Tempered metals and alloys are either strain hardened (also referred to as cold worked) or heat treated in order to improve their toughness. This aluminum 1145 shim stock is strain hardened to a full-hard H19 temper, which means it has been reduced up to 75% through cold working for a maximum possible improvement in the strength and hardness of the material.

A shim is a thin piece of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. Shims can also be used to fill in gaps between parts that are prone to wear. Shims are used in processes such as automobile and machine tool manufacturing, construction operations, musical instrument production, and computer engineering. Shim stock is a thin sheet of metal or plastic that can be cut, sawed, stamped, milled, or bored into shims of various shapes and sizes to suit a wide range of applications. Shims can be made from almost any material, such as wood, paper, metal, stone, and plastic. However, commercial shim stock is either metal or plastic. Specific properties of shim stock, such as magnetism, hardness, temper, yield strength, chemical reactivity, corrosion resistance, and conductivity, are dependent on base materials and any finishing processes that have been applied, such as tempering, rolling, or surface treatments. Shim stock is sold in rolls or sheets of varying lengths, widths, and thicknesses. Slotted shim stock is precut for improved accuracy in alignment and leveling. Laminated shim stock is produced in sheets of stacked, pressed layers of metal foil that can be peeled apart to adjust the sheet thickness. Shim stock conforms to American Society for Testing and Materials Standards (ASTM), Society of Automobile Engineers International Standards (SAE), SAE Aerospace Materials Standards (AMS), United States Military Standards (MIL), Copper Development Association Standards (CDA), and the American Iron and Steel Institute Standards (AISI).

Features

  • Aluminum 1145 is lightweight, provides good electrical and thermal conductivity, resists corrosion, and is easily cold worked and formed
  • Cold rolling improves the yield strength and hardness of the material and provides good surface quality, tight tolerances, and accurate dimensions
  • Strain hardened to a full-hard H19 temper to improve toughness
  • Conforms to specifications MIL-W-85 and ASTM-B-209
  • Sold in rolls for cutting, stamping, milling, and shaping into shims of various sizes and shapes
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 3.7 x 3.8 x 6.7 inches (9.4 x 9.7 x 17.0 cm)

First Available: 2017-05-15

Amazon Price: $23.85 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $25.11

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.004" Thick, 6" Width, 100" Length

 PartNumber: 40004   |   Asin: B0062FO3FU

This aluminum 1145 shim stock roll is cold rolled and strain-hardened to a full-hard H19 temper. It is made from aluminum 1145, a lightweight aluminum alloy that provides good electrical and thermal conductivity, resists corrosion, and is easily cold worked and formed. This shim stock is sold in rolls for cutting, stamping, milling, and shaping into shims of various sizes and shapes. It is nonmagnetic and it is not heat treatable. It complies with United States Military (MIL) standard W-85 and American Society for Testing and Materials (ASTM) standard B-209.

Cold rolling is a metal-forming process in which a sheet of material is passed between two rollers and compressed in order to reduce the thickness of the sheet. This aluminum 1145 shim stock is cold rolled, which improves the yield strength, hardness, surface quality, tolerances, and dimensional accuracy of the material. Tempered metals and alloys are either strain hardened (also referred to as cold worked) or heat treated in order to improve their toughness. This aluminum 1145 shim stock is strain hardened to a full-hard H19 temper, which means it has been reduced up to 75% through cold working for a maximum possible improvement in the strength and hardness of the material.

A shim is a thin piece of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. Shims can also be used to fill in gaps between parts that are prone to wear. Shims are used in processes such as automobile and machine tool manufacturing, construction operations, musical instrument production, and computer engineering. Shim stock is a thin sheet of metal or plastic that can be cut, sawed, stamped, milled, or bored into shims of various shapes and sizes to suit a wide range of applications. Shims can be made from almost any material, such as wood, paper, metal, stone, and plastic. However, commercial shim stock is either metal or plastic. Specific properties of shim stock, such as magnetism, hardness, temper, yield strength, chemical reactivity, corrosion resistance, and conductivity, are dependent on base materials and any finishing processes that have been applied, such as tempering, rolling, or surface treatments. Shim stock is sold in rolls or sheets of varying lengths, widths, and thicknesses. Slotted shim stock is precut for improved accuracy in alignment and leveling. Laminated shim stock is produced in sheets of stacked, pressed layers of metal foil that can be peeled apart to adjust the sheet thickness. Shim stock conforms to American Society for Testing and Materials Standards (ASTM), Society of Automobile Engineers International Standards (SAE), SAE Aerospace Materials Standards (AMS), United States Military Standards (MIL), Copper Development Association Standards (CDA), and the American Iron and Steel Institute Standards (AISI).

Features

  • Aluminum 1145 is lightweight, provides good electrical and thermal conductivity, resists corrosion, and is easily cold worked and formed
  • Cold rolling improves the yield strength and hardness of the material and provides good surface quality, tight tolerances, and accurate dimensions
  • Strain hardened to a full-hard H19 temper to improve toughness
  • Conforms to specifications MIL-W-85 and ASTM-B-209
  • Sold in rolls for cutting, stamping, milling, and shaping into shims of various sizes and shapes
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 3.7 x 3.8 x 6.6 inches (9.4 x 9.7 x 16.8 cm)

Amazon Price: $23.67 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $24.92

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.005" Thick, 6" Width, 100" Length

Model: PB0.127AS69320   |    Mpn: 69320   |    Ean: 0698158693207   |    PartNumber: 69320   |   Asin: B00065UZU4

Precision Brand Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

Features

  • Made from a H-18 full hard, tempered aluminum
  • Used in many applications, frequently in electrical and chemical fields
  • Lightweight with excellent corrosion resistance, workability and weldability
  • High thermal and electrical conductivity
  • Measures 6 wide by 100 long by 0.005 thick
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Precision Brand Products, Inc.

Package Dimensions: 3 x 3 x 7 inches (7.6 x 7.6 x 17.8 cm)

Amazon Price: $31.36 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $33.01

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.125" Thickness, 1/2" ID, 3/4" OD (Pack of 5)

 PartNumber: 475AL1470   |   Asin: B006U1O7I4

The 5052 aluminum round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM B209 specifications, and has a standard tolerance. The 5052 aluminum alloy is lightweight and strong, with good corrosion resistance. It is nonmagnetic.

Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

Features

  • 5052 aluminum round shim is lightweight and strong, with good corrosion resistance
  • Unpolished (mill) surface has no finish
  • Meets ASTM B209 specifications
  • Standard tolerance
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.1 x 2 x 2 inches (0.3 x 5.1 x 5.1 cm)

Amazon Price: $2.64 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $2.69

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.001" Thick, 6" Width, 100" Length

 PartNumber: 40001   |   Asin: B0062FO1UW

This aluminum 1145 shim stock roll is cold rolled and strain-hardened to a full-hard H19 temper. It is made from aluminum 1145, a lightweight aluminum alloy that provides good electrical and thermal conductivity, resists corrosion, and is easily cold worked and formed. This shim stock is sold in rolls for cutting, stamping, milling, and shaping into shims of various sizes and shapes. It is nonmagnetic and it is not heat treatable. It complies with United States Military (MIL) standard W-85 and American Society for Testing and Materials (ASTM) standard B-209.

Cold rolling is a metal-forming process in which a sheet of material is passed between two rollers and compressed in order to reduce the thickness of the sheet. This aluminum 1145 shim stock is cold rolled, which improves the yield strength, hardness, surface quality, tolerances, and dimensional accuracy of the material. Tempered metals and alloys are either strain hardened (also referred to as cold worked) or heat treated in order to improve their toughness. This aluminum 1145 shim stock is strain hardened to a full-hard H19 temper, which means it has been reduced up to 75% through cold working for a maximum possible improvement in the strength and hardness of the material.

A shim is a thin piece of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter sealing, and better spacing. Shims can also be used to fill in gaps between parts that are prone to wear. Shims are used in processes such as automobile and machine tool manufacturing, construction operations, musical instrument production, and computer engineering. Shim stock is a thin sheet of metal or plastic that can be cut, sawed, stamped, milled, or bored into shims of various shapes and sizes to suit a wide range of applications. Shims can be made from almost any material, such as wood, paper, metal, stone, and plastic. However, commercial shim stock is either metal or plastic. Specific properties of shim stock, such as magnetism, hardness, temper, yield strength, chemical reactivity, corrosion resistance, and conductivity, are dependent on base materials and any finishing processes that have been applied, such as tempering, rolling, or surface treatments. Shim stock is sold in rolls or sheets of varying lengths, widths, and thicknesses. Slotted shim stock is precut for improved accuracy in alignment and leveling. Laminated shim stock is produced in sheets of stacked, pressed layers of metal foil that can be peeled apart to adjust the sheet thickness. Shim stock conforms to American Society for Testing and Materials Standards (ASTM), Society of Automobile Engineers International Standards (SAE), SAE Aerospace Materials Standards (AMS), United States Military Standards (MIL), Copper Development Association Standards (CDA), and the American Iron and Steel Institute Standards (AISI).

Features

  • Aluminum 1145 is lightweight, provides good electrical and thermal conductivity, resists corrosion, and is easily cold worked and formed
  • Cold rolling improves the yield strength and hardness of the material and provides good surface quality, tight tolerances, and accurate dimensions
  • Strain hardened to a full-hard H19 temper to improve toughness
  • Conforms to specifications MIL-W-85 and ASTM-B-209
  • Sold in rolls for cutting, stamping, milling, and shaping into shims of various sizes and shapes
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 3.7 x 3.8 x 6.7 inches (9.4 x 9.7 x 17.0 cm)

Amazon Price: $24.68 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $25.23

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.003" Thick, 6" Width, 100" Length

Model: PB0.076AS69245   |    Mpn: 69245   |    Ean: 0698158692453   |    PartNumber: 69245   |   Asin: B00065UZT0

Precision Brand Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

Features

  • Made from a H-18 full hard, tempered aluminum
  • Used in many applications, frequently in electrical and chemical fields
  • Lightweight with excellent corrosion resistance, workability and weldability
  • High thermal and electrical conductivity
  • Measures 6 wide by 100 long by 0.003 thick
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Precision Brand Products, Inc.

Package Dimensions: 3.1 x 3.1 x 6.9 inches (7.9 x 7.9 x 17.5 cm)

Amazon Price: $38.72 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $38.72

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.125" Thickness, 3/4" ID, 1-1/8" OD (Pack of 5)

Model: 475AL1472   |    Mpn: 475AL1472   |    PartNumber: 475AL1472   |   Asin: B006U1O93C

The 5052 aluminum round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM B209 specifications, and has a standard tolerance. The 5052 aluminum alloy is lightweight and strong, with good corrosion resistance. It is nonmagnetic.

Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

Features

  • 5052 aluminum round shim is lightweight and strong, with good corrosion resistance
  • Unpolished (mill) surface has no finish
  • Meets ASTM B209 specifications
  • Standard tolerance
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.5 x 4 x 5.2 inches (1.3 x 10.2 x 13.2 cm)

Amazon Price: $6.58 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $6.60

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.125" Thickness, 5/8" ID, 1" OD (Pack of 5)

 PartNumber: 475AL1471   |   Asin: B006U1O888

The 5052 aluminum round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM B209 specifications, and has a standard tolerance. The 5052 aluminum alloy is lightweight and strong, with good corrosion resistance. It is nonmagnetic.

Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

Features

  • 5052 aluminum round shim is lightweight and strong, with good corrosion resistance
  • Unpolished (mill) surface has no finish
  • Meets ASTM B209 specifications
  • Standard tolerance
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 1 x 4 x 4 inches (2.5 x 10.2 x 10.2 cm)

Amazon Price: $5.13 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $5.23

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

5052 Aluminum Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B209, 0.063" Thickness, 1" ID, 1-1/2" OD (Pack of 10)

 PartNumber: 475AL1468   |   Asin: B006U1O6OE

The 5052 aluminum round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM B209 specifications, and has a standard tolerance. The 5052 aluminum alloy is lightweight and strong, with good corrosion resistance. It is nonmagnetic.

Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

Features

  • 5052 aluminum round shim is lightweight and strong, with good corrosion resistance
  • Unpolished (mill) surface has no finish
  • Meets ASTM B209 specifications
  • Standard tolerance
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.3 x 2.5 x 4.9 inches (0.8 x 6.4 x 12.4 cm)

Amazon Price: $11.61 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $11.62

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.032" Thickness, 1" ID, 1-1/2" OD (Pack of 10)

 PartNumber: 475AL1462   |   Asin: B006U1O2XE

The 5052 aluminum round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM B209 specifications, and has a standard tolerance. The 5052 aluminum alloy is lightweight and strong, with good corrosion resistance. It is nonmagnetic.

Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

Features

  • 5052 aluminum round shim is lightweight and strong, with good corrosion resistance
  • Unpolished (mill) surface has no finish
  • Meets ASTM B209 specifications
  • Standard tolerance
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.5 x 2 x 2 inches (1.3 x 5.1 x 5.1 cm)

Amazon Price: $4.99 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $4.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.032" Thickness, 3/4" ID, 1-1/8" OD (Pack of 10)

 PartNumber: 475AL1461   |   Asin: B006U1O1EO

The 5052 aluminum round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM B209 specifications, and has a standard tolerance. The 5052 aluminum alloy is lightweight and strong, with good corrosion resistance. It is nonmagnetic.

Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

Features

  • 5052 aluminum round shim is lightweight and strong, with good corrosion resistance
  • Unpolished (mill) surface has no finish
  • Meets ASTM B209 specifications
  • Standard tolerance
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.5 x 1 x 1 inches (1.3 x 2.5 x 2.5 cm)

Amazon Price: $5.97 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $6.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.032" Thickness, 5/8" ID, 1" OD (Pack of 10)

 PartNumber: 475AL1460   |   Asin: B006U1O0YA

The 5052 aluminum round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM B209 specifications, and has a standard tolerance. The 5052 aluminum alloy is lightweight and strong, with good corrosion resistance. It is nonmagnetic.

Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

Features

  • 5052 aluminum round shim is lightweight and strong, with good corrosion resistance
  • Unpolished (mill) surface has no finish
  • Meets ASTM B209 specifications
  • Standard tolerance
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.2 x 2 x 2 inches (0.5 x 5.1 x 5.1 cm)

Amazon Price: $5.96 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $5.98

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.032" Thickness, 1/2" ID, 3/4" OD (Pack of 10)

 PartNumber: 475AL1459   |   Asin: B006U1O09A

The 5052 aluminum round shim has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM B209 specifications, and has a standard tolerance. The 5052 aluminum alloy is lightweight and strong, with good corrosion resistance. It is nonmagnetic.

Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted.

Corrosion resistance describes the material's ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

Features

  • 5052 aluminum round shim is lightweight and strong, with good corrosion resistance
  • Unpolished (mill) surface has no finish
  • Meets ASTM B209 specifications
  • Standard tolerance
  • See more on Amazon...

Brand: Small Parts   |   Manufacturer: Small Parts

Package Dimensions: 0.2 x 1 x 1 inches (0.5 x 2.5 x 2.5 cm)

Amazon Price: $5.91 | as of 11/21/2018(6:26am pst)
Availibility: Usually ships in 24 hours
List Price: $5.94

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.010" Thick, 6" Width, 100" Length
  2. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.002" Thick, 6" Width, 100" Length
  3. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.001" Thick, 6" Width, 100" Length
  4. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.008" Thick, 6" Width, 100" Length
  5. 1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.016" Thick, 24" Width, 24" Length, 0.003" Lamina...
  6. 5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.016" Thickness, 1" ...
  7. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.006" Thick, 6" Width, 100" Length
  8. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.005" Thick, 6" Width, 100" Length
  9. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.004" Thick, 6" Width, 100" Length
  10. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.005" Thick, 6" Width, 100" Length

Most Wished For

  1. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.010" Thick, 6" Width, 100" Length
  2. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.002" Thick, 6" Width, 100" Length
  3. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.001" Thick, 6" Width, 100" Length
  4. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.008" Thick, 6" Width, 100" Length
  5. 1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.016" Thick, 24" Width, 24" Length, 0.003" Lamina...
  6. 5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.016" Thickness, 1" ...
  7. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.006" Thick, 6" Width, 100" Length
  8. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.005" Thick, 6" Width, 100" Length
  9. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.004" Thick, 6" Width, 100" Length
  10. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.005" Thick, 6" Width, 100" Length

Most Gifted

  1. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.010" Thick, 6" Width, 100" Length
  2. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.002" Thick, 6" Width, 100" Length
  3. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.001" Thick, 6" Width, 100" Length
  4. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.008" Thick, 6" Width, 100" Length
  5. 1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.016" Thick, 24" Width, 24" Length, 0.003" Lamina...
  6. 5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.016" Thickness, 1" ...
  7. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.006" Thick, 6" Width, 100" Length
  8. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.005" Thick, 6" Width, 100" Length
  9. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.004" Thick, 6" Width, 100" Length
  10. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.005" Thick, 6" Width, 100" Length

Top Selling

  1. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.010" Thick, 6" Width, 100" Length
  2. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.002" Thick, 6" Width, 100" Length
  3. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.001" Thick, 6" Width, 100" Length
  4. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.008" Thick, 6" Width, 100" Length
  5. 1100 Aluminum Shim Stock, AISI 1100-H18/AMS 4013, 0.016" Thick, 24" Width, 24" Length, 0.003" Lamina...
  6. 5052 Aluminum Round Shim, Unpolished (Mill) Finish, H01/H04 Temper, ASTM B209, 0.016" Thickness, 1" ...
  7. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM B209, 0.006" Thick, 6" Width, 100" Length
  8. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.005" Thick, 6" Width, 100" Length
  9. 1100 Aluminum Shim Stock, Full Hard Temper, ASTM-B-209, 0.004" Thick, 6" Width, 100" Length
  10. 1100 Aluminum Shim Stock, Full Hard Temper, AISI 1100-H18, 0.005" Thick, 6" Width, 100" Length



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.