Frontpage > Industrial > Tapes, Adhesives & Sealants > Metal Filled Epoxies

Best Metal Filled Epoxies - Buying Guide

Last Updated: 11/14/2019

Share on


  #1

Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear

Model: 4200101   |    Mpn: 4200101   |    Ean: 0014444923955   |    PartNumber: 4200101   |   Asin: B001Z3C3AG

Gorilla takes epoxy to a new level the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare Your Work Area and the Surface: It is recommended to use Gorilla Epoxy in a well-ventilated area. Prepare the surface: To improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla Epoxy: Remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: To reach maximum bond strength, clamp project together and leave undisturbed. Important Cure Times: Set: 5 minutes to apply and position Handling: Allow to cure for 30 minutes undisturbed (no weight or handling) Final Cure: Allow 24 hours for load-bearing weight Storage: To close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.

Features

  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Dries Clear; Ideal for clean, easy finishing
  • 5 Minute Set; Plenty of repositioning time for the perfect fit
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • See more on Amazon...

Brand: Gorilla   |   Manufacturer: Gorilla

Item Dimensions: 8.69 x 3.38 x 1.13 inches (22.1 x 8.6 x 2.9 cm)   |   Package Dimensions: 0.9 x 2.1 x 6.4 inches (2.3 x 5.3 x 16.3 cm)

Amazon Price: $4.20 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Bob Smith Industries BSI-201 Quik-Cure Epoxy (4.5 oz. Combined)

Model: BSI-201   |    Mpn: BSI-201   |    Ean: 7535001808148   |    PartNumber: BSI-201   |   Asin: B0166FFFD4

QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high vibration or stress. QUIK-CURE shouldn t be used in areas that are subject to long-term immersion in water; however, it works fine for the internal structure of wood framed boats. QUIK-CURE is our only epoxy on which you can apply polyester resins. It can be mixed with micro balloons to form a quick setting putty. Items bonded with QUIK-CURE can be handled after 15 minutes. Full strength is reached in 1 hour. Directions in 5 different languages.

Features

  • Made in the USA
  • Five minute working time
  • Handle parts in ten minutes
  • Proud Sponsors of Wounded Warrior Project
  • See more on Amazon...

Brand: Bob Smith Industries   |   Manufacturer: Bob Smith Industries Incorporated

Item Dimensions: 3.94 x 1.57 x 1.57 inches (10.0 x 4.0 x 4.0 cm)   |   Package Dimensions: 1.42 x 4.25 x 6.14 inches (3.6 x 10.8 x 15.6 cm)

Amazon Price: $8.76 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

J-B Weld 8297 HighHeat 550 Degree Epoxy Putty Stick - 2 oz.

Model: 8297   |    Mpn: 8297   |    Ean: 6935743366714   |    PartNumber: 8297   |   Asin: B007PP26RI

HighHeat is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. HighHeat is rated at a tensile strength of 800 PSI and cures to a machine grey in color. It is able to withstand continuous heat exposure of 400 F and intermittent heat exposure to 550 F

Features

  • HIGHHEAT: Is a hand mixable epoxy putty stick specifically formulated to bond and repair materials that will be exposed to high temperatures in automotive and industrial maintenance applications.
  • THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel.
  • EASY TO USE: This industrial-strength product outperforms conventional epoxy putties at high temps and sets in 1 hour. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted.
  • VERSATILE & DEPENDABLE: Perfect for exhaust manifolds, mufflers, engine blocks, duct work & more. Tensile strength of 800 PSI. It is able to withstand heat exposure of 400 F and intermittent to 550 F.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond.
  • 3 times stronger at high temperatures
  • Withstands continuous heat up to 450 degrees Fahrenheit, and intermittent heat up to 500 degrees Fahrenheit
  • Strength of 800 PSI at room temperature and 600 PSI at 400 degrees Fahrenheit
  • Perfect for tail pipes, mufflers, machinery, engine blocks, and exhaust manifolds
  • Special Shipping Information: This item cannot be returned and has additional shipping restrictions
  • See more on Amazon...

Brand: J-B Weld   |   Manufacturer: JBWeld

Item Dimensions: 4.13 x 1.18 x 1.18 inches (10.5 x 3.0 x 3.0 cm)   |   Package Dimensions: 1.5 x 3.6 x 7.4 inches (3.8 x 9.1 x 18.8 cm)

First Available: 2012-03-29

Amazon Price: $6.99 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $9.60

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 2)

Model: 4200130   |    Mpn: 4200130   |    Ean: 0078619001220   |    PartNumber: 4200130   |   Asin: B01M7VD07W

Gorilla takes epoxy to a new level the Gorilla tough level. With its superior solvent and water resistance, Gorilla epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it Dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare your work area and the surface: It is recommended to use Gorilla epoxy In a well-ventilated area. Prepare the surface: to improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla epoxy: remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: after mixing is complete, apply Gorilla epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: to reach maximum bond strength, clamp project together and leave undisturbed. Important cure times: set: 5 minutes to apply and position handling: allow to cure for 30 minutes undisturbed (no weight or handling) final cure: allow 24 hours for load-bearing weight storage: to close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla glue company.

Features

  • Strong, permanent, fast and gap-filling; great for multiple surface applications
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Dries clear; ideal for clean, easy finishing
  • 6 minute set; plenty of repositioning time for the perfect fit
  • Easy-to-use syringe; separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • See more on Amazon...

Brand: Gorilla   |   Manufacturer: Gorilla Glue

Item Dimensions: 1 x 8 x 11 inches (2.5 x 20.3 x 27.9 cm)   |   Package Dimensions: 0.8 x 3.2 x 7.1 inches (2.0 x 8.1 x 18.0 cm)

Amazon Price: $9.12 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $9.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Loctite 1919324 Marine Epoxy 0.85-Fluid Ounce Syringe (1405604), 1 Pack, White

Model: 1919324   |    Mpn: 1919324   |    Ean: 0079340647978   |    PartNumber: 1919324   |   Asin: B00KH62K50

Loctite Marine Epoxy is a two-part system consisting of an epoxy resin and a hardener. The convenient syringe dispenses equal amounts of each component every time. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond in 120 minutes. It can be applied and cured underwater. Ideal for repairing pipes. It cures to an off-white finish and can be easily sanded or machined. It does not shrink and is resistant to water and most common solvents.

Features

  • Machinable, won't crack when drilled
  • Water and solvent resistant, highly durable
  • Does not shrink, one-time application
  • Convenient syringe dispenses equal amounts of each component every time
  • Apply and cure under water, eliminates the need to drain out water before fixing
  • See more on Amazon...

Brand: Loctite   |   Manufacturer: Loctite

Item Dimensions: 8 x 3.88 x 1.38 inches (20.3 x 9.9 x 3.5 cm)   |   Package Dimensions: 1.63 x 4.88 x 8 inches (4.1 x 12.4 x 20.3 cm)

Amazon Price: $4.33 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $11.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1lb in Two Cans, Off White 160114

Model: 160114   |    Mpn: 160114   |    Ean: 0549831601142   |    PartNumber: 160114   |   Asin: B008DZJJGU

PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High "wet grab" or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. In cold or cool temperatures, place PC-11 containers near heat prior to using. PC-11 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-11. Denatured alcohol is excellent for smoothing applied PC-11. Also use Denatured alcohol to clean surfaces before applying. Use with: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, and much more. Work time (70 degree F): 30-40 minutes. Tack free cure time: 90 minutes. Cure for service: 8-12 hours. Maximum cure: 7 day. Gardner impact resistance: 140in./lb. Conduction (electric): non conductive. Excellent thermal shock. Non toxic once cured. Heat range: -20 to 200 degree F.

Features

  • Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments
  • Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber
  • Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F
  • High-tack paste can be used in vertical and overhead applications
  • Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water
  • See more on Amazon...

Brand: PC Products   |   Manufacturer: Protective Coating Co.

Item Dimensions: 3 x 3 x 5.75 inches (7.6 x 7.6 x 14.6 cm)   |   Package Dimensions: 2.7 x 2.7 x 7.1 inches (6.9 x 6.9 x 18.0 cm)

Amazon Price: $14.60 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $24.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Crystal Clear Epoxy Resin | TotalBoat 2 Quart Epoxy Resin & Hardener Kit for Bar, Table Tops & Countertops | Pro Epoxy Coating for Wood, Concrete, Art

Model: TB-9334   |    Mpn: 43237-2   |    Ean: 0811932020758   |    PartNumber: 43237-2   |   Asin: B00S9R8E8Q

Tabletop is a pourable 2 part epoxy system for crystal clear protective finishes on bar tops, table tops, countertops, counters, wood, concrete and other surfaces. It's simple 1 to 1 mix ratio, self leveling nature and room temperature cure make it easy for DIY and professional users to get excellent, smooth results without bubbles or other problems. This resin cures crystal clear, deep, glassy and 100% waterproof, for superior scratch, stain, and yellowing resistance. Great for live edge tables, woodworking projects, floors and crafting. While Tabletop is indeed UV resistant, it is not intended for outdoor applications with prolonged exposure to sunlight. Compare this kit to Pro marine pro epoxy, MAS Crystal Clear coating for bars and table tops, Envirotex Lite, Parks Super Glaze, System Three (3) Mirror Coat, FX Countertop, Liquid Glass, Art Resin, Apoxy, Ecopoxy and other similar products including Casting Resins. Mix ratio by volume: 1 part resin to 1 part hardener. Application temperature: 70-80 F. Working time: 20 minutes @ 70 F. Gel time: 30 minutes @ 77 F. Time between coats: 4-8 hours (without needing to sand between coats. Cure time: 16-20 hours @ 70 F. Coverage at 1/8" thick (2-Quart Kit): 6. 4 sq ft per half gallon, (Gallon Kit): 12. 8 sq ft per gallon. All ingredients are on the USDA approved list for contact with food, once cured.

Features

  • SUPER CLEAR: Total Boat Tabletop Epoxy cures crystal clear for superior finishes on bars, table tops, counters plus art & woodworking projects
  • EASY TO USE: Simple 1: 1 mix ratio, 2 part pourable epoxy coating is self-leveling, and cures smooth as glass at room temperature with no blushing
  • DURABLE HIGH GLOSS FINISH: Cured epoxy is UV-resistant, 100% waterproof, resists blemishes, dings, heat, scratches, stains and yellowing
  • WIDE RANGE OF PROJECTS: Pro results on wood, metal, stone, ceramic and concrete tables, bar tops, countertops as well as embedding objects, decoupage, casting & other crafting projects
  • IDEAL FOR BOTH DIY AND PROFESSIONAL USE: 2 Quart kit includes 1 Quart resin & 1 Quart hardener
  • See more on Amazon...

Brand: TotalBoat   |   Manufacturer: Jamestown Distributors

Item Dimensions: 4.5 x 5.1 x 7.5 inches (11.4 x 13.0 x 19.1 cm)   |   Package Dimensions: 4 x 5 x 7.7 inches (10.2 x 12.7 x 19.6 cm)

Amazon Price: $49.99 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $49.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 3)

Model: 4200101-3   |    Mpn: 4200101-3   |    Ean: 0795525766189   |    PartNumber: 4200101-3   |   Asin: B01MFDGJ7D

Gorilla takes epoxy to a new level the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare Your Work Area and the Surface: It is recommended to use Gorilla Epoxy in a well-ventilated area. Prepare the surface: To improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla Epoxy: Remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: To reach maximum bond strength, clamp project together and leave undisturbed. Important Cure Times: Set: 5 minutes to apply and position Handling: Allow to cure for 30 minutes undisturbed (no weight or handling) Final Cure: Allow 24 hours for load-bearing weight Storage: To close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.

Features

  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Dries Clear; Ideal for clean, easy finishing
  • 7 Minute Set; Plenty of repositioning time for the perfect fit
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • See more on Amazon...

Brand: Gorilla   |   Manufacturer: Gorilla Glue

Item Dimensions: 8.69 x 3.38 x 3.39 inches (22.1 x 8.6 x 8.6 cm)   |   Package Dimensions: 1.6 x 7.8 x 8.5 inches (4.1 x 19.8 x 21.6 cm)

Amazon Price: $14.08 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 1-2 business days
List Price: $14.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

3M Scotch-Weld 08966 Epoxy Adhesive DP420 50mL, DP420, Black

Model: 08966   |    Mpn: 08966   |    Ean: 0638060089668   |    PartNumber: 08966   |   Asin: B07FQQGP96

3M Scotch-Weld Epoxy Adhesive DP420 is a toughened, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. 3M Scotch-Weld Epoxy Adhesive DP420 can replace mechanical fasteners, screws, rivets and spot welds in many applications.

Features

  • High peel and shear strength maintains lasting bond at high and low temperatures
  • Toughened for impact and fatigue resistance
  • 20 minute work life provides time for positioning and adjustment
  • Adhesive cures at room temperature, making it a convenient and easy to use solution for challenging applications
  • Reaches high strength quickly with heat cure
  • See more on Amazon...

Brand: 3M Scotch-Weld   |   Manufacturer: 3M

Package Dimensions: 1 x 1.8 x 4.75 inches (2.5 x 4.6 x 12.1 cm)

First Available: 2018-08-05

Amazon Price: $24.70 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 10)

Model: 4200101-10   |    Mpn: 4200101-10   |    Ean: 0052427000101   |    PartNumber: 4200101-10   |   Asin: B01MG64ENZ

Gorilla takes epoxy to a new level the Gorilla Tough level. With its superior solvent and water resistance, Gorilla Epoxy adhesive is incredibly strong and durable for household and automotive repairs alike. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense and won t harden over time. The two-part, gap-filling formula easily bonds steel, aluminum, glass, wood, ceramic, tile and most plastics. Plus, it dries in an ideal, crystal-clear finish that makes projects look spotless. Directions: 1. Prepare Your Work Area and the Surface: It is recommended to use Gorilla Epoxy in a well-ventilated area. Prepare the surface: To improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded. 2. Mixing Gorilla Epoxy: Remove the black cap. With tip pointing upward, cut or snap the end from tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. Mix the two parts for about 20 seconds, until the mixture is uniform. 3. Application: After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply. 4. Clamping: To reach maximum bond strength, clamp project together and leave undisturbed. Important Cure Times: Set: 5 minutes to apply and position Handling: Allow to cure for 30 minutes undisturbed (no weight or handling) Final Cure: Allow 24 hours for load-bearing weight Storage: To close, pull plunger slightly back. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Click on the Gorilla link at the top of this page to see more fine products from the Gorilla Glue Company.

Features

  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Dries Clear; Ideal for clean, easy finishing
  • 14 Minute Set; Plenty of repositioning time for the perfect fit
  • Easy-to-Use Syringe; Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses
  • See more on Amazon...

Brand: Gorilla   |   Manufacturer: Gorilla Glue

Item Dimensions: 8.69 x 3.38 x 11.3 inches (22.1 x 8.6 x 28.7 cm)   |   Package Dimensions: 5.12 x 7.83 x 9.25 inches (13.0 x 19.9 x 23.5 cm)

Amazon Price: $46.65 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 1-2 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Devcon (62345-6PK) Plastic Steel Epoxy - 25 ml Dev-Tube, (Pack of 6)

Model: 62345-6PK   |    Mpn: 62345-6PK   |    PartNumber: 62345-6PK   |   Asin: B00C3Z9X1M

Devcon Plastic Steel Epoxy is a two-part, high strength, cold-welding epoxy for use on all types of metal repairs. Non-flammable and water-resistant, this epoxy contains a steel alloy that will not rust. Fills holes and repairs cracks in broken furniture, tools, appliances, toys, cars and more. Dries to a dark gray color, and once fully cured, it can be drilled, threaded, machined or filled. Bonds all metals including steel, stainless steel, aluminum, brass, iron, pewter, and copper with a tensile strength of 2500 PSI. Only mix the amount of hardener and resin together that can be used within the handling time, and always mix equal portions of the hardener and resin thoroughly together in order for this product to cure properly. Epoxies are generally not recommended for long term exposure to chemicals and solvents. Temperature Range: 200 F constant; 250 F intermittent.

Features

  • two-part, high strength, cold-welding epoxy for use on all types of metal repairs
  • Contains a steel alloy that will not rust
  • Handling time: 60 minutes; Set time: 6 hours; Cure time: 16-24 hours
  • Non-flammable and water-resistant
  • Can be drilled, threaded, machined or filled once fully cured
  • See more on Amazon...

Brand: Devcon   |   Manufacturer: Devcon

Package Dimensions: 5.3 x 5.5 x 8.9 inches (13.5 x 14.0 x 22.6 cm)

First Available: 2013-03-30

Amazon Price: $20.97 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $23.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

A+B Epoxy 9904K White A+B Rezolin Epoxy Kit, 14 oz. Container Size, Box Container Type

Model: 9904K   |    Mpn: 9904K   |    Ean: 0857888000048   |    PartNumber: 9904K   |   Asin: B0030D2N22

A+B Epoxy putty 14.0 oz. Is an easy-to-use, two part putty you simply mix and mold like clay - no complicated weighing or measuring required. Easy 1:1 cut what you need mix ratio, form it into any shape. It hardens in one hour and makes a final, steel-hard cure in 12 hours. Can cure under water. Provides a durable and permanent bond to: fiberglass, concrete, Brick, stone, glass, porcelain, Tile, ceramics, pottery, metal, copper, chrome, iron, wood, most PVC and countless other materials. Mixing and handling: make sure the application surface is free of gas, grease, oil, rust, dirt, and other debris. Roughing or sanding the surface is recommended. Mold the epoxy to the approximate shape of the repair and apply firmly, sealing and smoothing thoroughly and securely. Using rezolin a + b epoxy putty is amazingly easy, simply cut off equal parts of the a + b bars. Knead and roll in your hands or on a clean working surface until the colors merge. Make sure there are no streaks. Gloves are advisable for mixing and molding the putty products. Rubbing water on the surface will yield a professionally looking smooth surface. Let it harden and cure for the specified time: one hour hardening and 12 hour curing time for regular a + b epoxy. Clean all tools, reusable gloves, and hands, if necessary, with soap and warm water immediately after use. Some suggested uses: fill cracks or holes in decks and broken tiles - cures under water fill cracks and holes in pool or spa and underwater plumbing, pumps and drains - no draining required repair breaks, cracks or leaks in all types of plumbing fixtures and ceramics - tubs, toilets, sinks, tiles, caulking seals leaks in gasoline tanks and air conditioner systems repair all types of fiberglass cracks, holes and breaks insulating cable splices. Can be drilled and sanded once fully cured.

Features

  • Easy to Use 2 part hand moldable epoxy putty hardens in 50-60 minutes with final steel hard cure in 12 hours
  • Can cure underwater
  • Use for pool and SPA repairs (plaster, gunite or fiberglass), Boats, RV, Auto, at work and around the house
  • Use on all types of plumbing fixtures and ceramics, tubs, toilets, sinks, tiles, caulking, fiberglass, sculpture, taxidermy, doll repair, carving, metal, pump housing, pool decks and broken tiles
  • Made in the USA
  • See more on Amazon...

Brand: A+B Epoxy   |   Manufacturer: Rezolin, LLC

Item Dimensions: 4 x 10 x 4 inches (10.2 x 25.4 x 10.2 cm)   |   Package Dimensions: 1.7 x 2 x 8.8 inches (4.3 x 5.1 x 22.4 cm)

Amazon Price: $18.64 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $56.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Loctite Epoxy Extra Time Gel 0.85-Fluid Ounce Syringe (1405603)

Model: 1405603   |    Mpn: 1405603   |    Ean: 5448095494147   |    PartNumber: 1405603   |   Asin: B001MUM62C

Loctite 1405603 0. 85 Oz Extra Time Epoxy

Features

  • The product is 85oz extra time epoxy
  • Easy and simple use kit
  • The product is manufactured in china
  • Bonds metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone
  • Can be combined with fiberglass cloth for a durable patch
  • High impact resistance - won't crack when drilled
  • Convenient syringe dispenses equal amounts of each component every time
  • 0. 85-Fluid ounce plastic syringe
  • Loctite Epoxy Extra Time sets in 60 minutes, excellent for complex multi-piece assemblies.
  • It is used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.
  • Loctite Epoxy Extra Time does not shrink and is resistant to water and most common solvents.
  • It can be tinted with earth pigments, cement or sand for color matching, and can be sanded and drilled.
  • Great for bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone.
  • See more on Amazon...

Brand: Loctite   |   Manufacturer: Loctite

Item Dimensions: 8 x 3.81 x 1.5 inches (20.3 x 9.7 x 3.8 cm)   |   Package Dimensions: 0.7 x 2.2 x 6.8 inches (1.8 x 5.6 x 17.3 cm)

Amazon Price: $2.65 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $10.20

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

MG Chemicals 8329-350G Non-Silicone Epoxy Mold Release, 12.3 oz Aerosol

Model: 8329-350G   |    Mpn: 8329-350G   |    Ean: 0779008832936   |    PartNumber: 8329-350G   |   Asin: B005T6GTGO

Epoxy mold release apply to a surface before pouring in encapsulating and potting compound. It allows for a clean removal of the cured epoxy. For use with all types of epoxies and phenolic resins. RoHS compliant.

Features

  • Epoxy mold release
  • Non-Silicone
  • It allows for a clean removal of the cured epoxy
  • For use with all types of epoxies and phenolic resins
  • See more on Amazon...

Brand: MG Chemicals   |   Manufacturer: MG Chemicals

Package Dimensions: 2.52 x 2.68 x 9.37 inches (6.4 x 6.8 x 23.8 cm)

Amazon Price: $13.95 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

J-B Weld 8267-S SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz

Model: 8267-S   |    Mpn: 8267-S   |    Ean: 0718767917058   |    PartNumber: 8267-S   |   Asin: B000786GLM

Tank Weld is hand-mixable, steel-reinforced, non-rusting epoxy putty that quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound that can be molded into shapes or used to build up, patch and repair steel components. TankWeld sets in 5 minutes and after 60 minutes, can be drilled, tapped, machined, ground, filed and painted. AutoWeld cures to a dark grey color, is rated at a tensile strength of 900 PSI and will withstand temperatures up to 300 degrees F.

Features

  • TANK WELD: Hand-mixable, steel-reinforced, non-rusting, petroleum- resistant epoxy putty that quickly repairs or rebuilds anything made of metal. Perfect for household, automotive and lawn tool use.
  • THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to traditional torch welding. Designed to be extremely effective in harsh environments, once it sets, it's tougher than steel.
  • SIMPLE TO USE: No removal of gas tank is required to stop leaks. Once cured, it can be drilled, tapped, machined, ground, filed and painted and will withstand temperatures up to 300 F .
  • VERSATILE & DEPENDABLE: Great for gas tanks, radiators, lawn and garden equipment, water tanks and all metals. Professionals, mechanics and avid DIYers know J-B gets the job done.
  • NO PROJECT TOO BIG OR TOO SMALL: We have all the products you need to get the job done right. JB Weld always delivers the legendary performance of the World's Strongest Bond.
  • See more on Amazon...

Brand: J-B Weld   |   Manufacturer: JBWeld

Item Dimensions: 7 x 4 x 1 inches (17.8 x 10.2 x 2.5 cm)   |   Package Dimensions: 1.34 x 4.09 x 4.72 inches (3.4 x 10.4 x 12.0 cm)

First Available: 2004-11-05

Amazon Price: $4.53 | as of 11/14/2019(12:28am pst)
Availibility:
List Price: $9.99

Warranty: no warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

Loctite Epoxy Gel 0.85-Fluid Ounce Syringe (1405602)

Model: 1405602   |    Mpn: 1405602   |    Ean: 0079340324275   |    PartNumber: 1405602   |   Asin: B000DZD0HC

Loctite 1405602 Gel Epoxy

Features

  • Epoxy
  • Gel
  • Ideal for vertical surfaces and overhead repairs
  • Resistant to solvents, moisture and impact
  • Water resistant, clear and permanent
  • Bonds metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone
  • Can be combined with fiberglass cloth for a durable patch
  • High impact resistance - won't crack when drilled
  • Water resistant and does not shrink
  • 0.85-Fluid ounce plastic syringe
  • See more on Amazon...

Brand: Loctite   |   Manufacturer: Loctite

Item Dimensions: 8 x 3.88 x 1.5 inches (20.3 x 9.9 x 3.8 cm)   |   Package Dimensions: 4.02 x 4.02 x 7.99 inches (10.2 x 10.2 x 20.3 cm)

Amazon Price: $4.57 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $11.18

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Samsung DA81-05595A A/S-Epoxy

Model: DA81-05595A   |    Mpn: DA81-05595A   |    Ean: 0717449142856   |    PartNumber: DA81-05595A   |   Asin: B01BRKA0ME

This is an authorized aftermarket product. Fits with various Samsung brand models. It has a oem part # DA81-05595A.

Features

  • This Is An O.E.M. Authorized Part
  • Fits With Various Samsung Brand Models
  • Oem Part # Da81-05595A
  • Brand Name: Samsung
  • See more on Amazon...

Brand: Samsung   |   Manufacturer: Samsung

Item Dimensions: 2 x 2 x 3 inches (5.1 x 5.1 x 7.6 cm)   |   Package Dimensions: 1.2 x 1.7 x 5.9 inches (3.0 x 4.3 x 15.0 cm)

Amazon Price: $37.90 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 1-2 business days
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Super Glue Plastic Fusion Epoxy Adhesive, #15277

Model: 15277   |    Mpn: 15277   |    Ean: 0785479852366   |    PartNumber: 15277   |   Asin: B000LGT0GI

Plastic Fusion, OZ, Epoxy Adhesive In Syringe Applicator, Multi-Purpose Industrial Strength Plastic Based Acrylic, Dispenses Resin & Hardener Into Equal Parts With 1 Push, Ready To Mix & Apply, 14-18 Minute Setting Time, Works Well On Plastic Toys & Fixtures Made Of Plastic, Metal & Concrete, Cures To Opaque Light Yellow Color.

Features

  • The product is OZ Epoxy Adhesive
  • Dispenses Resin & Hardener Into Equal Parts With 1 Push
  • The product is manufactured in China
  • 4000-pounds per square inch holding power
  • Working time in 8-minutes
  • Handling time in 30-minutes
  • Temperature range 40- to 250-degrees F
  • This item is not for sale in Catalina Island
  • See more on Amazon...

Brand: Super Glue   |   Manufacturer: Super Glue

Item Dimensions: 2 x 4 x 8 inches (5.1 x 10.2 x 20.3 cm)   |   Package Dimensions: 1 x 4 x 8.5 inches (2.5 x 10.2 x 21.6 cm)

Amazon Price: $4.99 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $5.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

Permatex 25909-12PK Liquid Metal Filler, 3.5 oz. (Pack of 12)

Model: 25909-12PK   |    Mpn: 25909-12PK   |    PartNumber: 25909-12PK   |   Asin: B001RERDWG

Permatex Liquid Metal Filler is a specialty adhesive which offers ideal solutions for many automotive bonding jobs. This easy-to-use filler can be drilled, filed, sanded and painted and forms a long-lasting, metal-tough bond. Works on metal, wood, and concrete and is an excellent adhesion to galvanized metal. This filler also repairs cracks or porosity leaks in cast metal parts and fills small holes, cracks, and perforations. As complements to a full line of super glues, these products make a more complete adhesive set, while the tried and true formulas guarantee consumer satisfaction.

Features

  • Works on metal, wood and concrete
  • Excellent adhesion to galvanized metal
  • Repairs cracks or porosity leaks in cast metal parts and fills small holes, cracks, and perforations
  • Resists water, oil and gasoline
  • Suggested Applications: Oil pans, stake bed holes, door panels, cast metal parts
  • See more on Amazon...

Brand: Permatex   |   Manufacturer: Permatex

Package Dimensions: 6.4 x 6.9 x 9.2 inches (16.3 x 17.5 x 23.4 cm)

Amazon Price: $25.00 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price: $26.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

J-B Weld 8265S Original Steel Reinforced Epoxy Twin Pack - 2 oz (Pack of 2)

 Ean: 7091267059903   |    PartNumber: 8265-S   |   Asin: B01FWGF9L6

Features

  • Non Toxic formula
  • Easy to use, cures to dark gray
  • Use on automotive, brick, concrete, metal and more
  • Will set in 4-6 hours, and cure in 16-24 hours
  • Waterproof, petroleum, chemical, and acid resistant when fully cured
  • See more on Amazon...

Brand: J-B Weld   |   Manufacturer: J-B Weld

Item Dimensions: 8.08 x 4.86 x 5.08 inches (20.5 x 12.3 x 12.9 cm)   |   Package Dimensions: 0.9 x 5 x 7.6 inches (2.3 x 12.7 x 19.3 cm)

Amazon Price: $9.99 | as of 11/14/2019(12:28am pst)
Availibility: Usually ships in 24 hours
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear
  2. Bob Smith Industries BSI-201 Quik-Cure Epoxy (4.5 oz. Combined)
  3. J-B Weld 8297 HighHeat 550 Degree Epoxy Putty Stick - 2 oz.
  4. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 2)
  5. Loctite 1919324 Marine Epoxy 0.85-Fluid Ounce Syringe (1405604), 1 Pack, White
  6. PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1lb in Two Cans, Off White 160114
  7. Crystal Clear Epoxy Resin | TotalBoat 2 Quart Epoxy Resin & Hardener Kit for Bar, Table Tops &am...
  8. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 3)
  9. 3M Scotch-Weld 08966 Epoxy Adhesive DP420 50mL, DP420, Black
  10. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 10)

Most Wished For

  1. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear
  2. Bob Smith Industries BSI-201 Quik-Cure Epoxy (4.5 oz. Combined)
  3. J-B Weld 8297 HighHeat 550 Degree Epoxy Putty Stick - 2 oz.
  4. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 2)
  5. Loctite 1919324 Marine Epoxy 0.85-Fluid Ounce Syringe (1405604), 1 Pack, White
  6. PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1lb in Two Cans, Off White 160114
  7. Crystal Clear Epoxy Resin | TotalBoat 2 Quart Epoxy Resin & Hardener Kit for Bar, Table Tops &am...
  8. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 3)
  9. 3M Scotch-Weld 08966 Epoxy Adhesive DP420 50mL, DP420, Black
  10. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 10)

Most Gifted

  1. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear
  2. Bob Smith Industries BSI-201 Quik-Cure Epoxy (4.5 oz. Combined)
  3. J-B Weld 8297 HighHeat 550 Degree Epoxy Putty Stick - 2 oz.
  4. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 2)
  5. Loctite 1919324 Marine Epoxy 0.85-Fluid Ounce Syringe (1405604), 1 Pack, White
  6. PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1lb in Two Cans, Off White 160114
  7. Crystal Clear Epoxy Resin | TotalBoat 2 Quart Epoxy Resin & Hardener Kit for Bar, Table Tops &am...
  8. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 3)
  9. 3M Scotch-Weld 08966 Epoxy Adhesive DP420 50mL, DP420, Black
  10. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 10)

Top Selling

  1. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear
  2. Bob Smith Industries BSI-201 Quik-Cure Epoxy (4.5 oz. Combined)
  3. J-B Weld 8297 HighHeat 550 Degree Epoxy Putty Stick - 2 oz.
  4. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 2)
  5. Loctite 1919324 Marine Epoxy 0.85-Fluid Ounce Syringe (1405604), 1 Pack, White
  6. PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1lb in Two Cans, Off White 160114
  7. Crystal Clear Epoxy Resin | TotalBoat 2 Quart Epoxy Resin & Hardener Kit for Bar, Table Tops &am...
  8. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 3)
  9. 3M Scotch-Weld 08966 Epoxy Adhesive DP420 50mL, DP420, Black
  10. Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear, (Pack of 10)



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.