Frontpage > Industrial > Test, Measure & Inspect > Gage Blocks & Accessories

Best Gage Blocks & Accessories - Buying Guide

Last Updated: 10/20/2019

Share on


  #1

Mitutoyo Steel Rectangular Gage Block, ASME Grade 0, 0.25" Length

Model: 611212-531   |    Mpn: 611212-531   |    Ean: 4946368447735   |    PartNumber: 611212-531   |   Asin: B003U9W8XK

The Mitutoyo grade 0 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.

This grade 0 gage block is commonly used in workshop and inspection applications to calibrate and inspect mechanical parts and tools, to verify the accuracy of plug and snap gages, and to set electronic measuring devices. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior.

This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.

Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide material, and have a square or rectangular base. Each block has a unique identification number. Length is in inch or millimeter measurement. They can be sold individually, and are also sold in sets with blocks of varying lengths. Gage blocks can be wrung together to create a required length. Wringing is the process of lapping blocks together with a small amount of oil. They are standardized by grade, which refers to the tolerance or deviation of an individual block from its nominal length. Gage block grades are defined for flatness, length, parallelism and surface finish. Some grades of gage blocks meet standards such as ASME, Association for Iron and Steel (AIST), and International Organization for Standards (ISO). Application and required level of accuracy dictate which grade of gage block should be used. Some manufacturers provide an internally-generated certificate of inspection to verify that a gage block meets grade standards. Gage blocks can also go through a calibration certification process to verify measurement accuracy. Calibration is performed by an accredited facility. Gage blocks are commonly recalibrated after use to ensure dimensional accuracy. If a gage block does not meet calibration standards, it should no longer be used. Both a certificate of inspection and a calibration certificate specify the deviation from the nominal length.

Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Features

  • Grade 0 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish
  • High-carbon, high-chrome steel provides high hardness and wear resistance
  • Rectangular base for accurate wringing
  • Nominal length (in inches) indicated with laser-etched, black characters
  • Identification number etched in block for traceability
  • See more on Amazon...

Brand: Mitutoyo   |   Manufacturer: Mitutoyo

Item Dimensions: 3.1 x 1 x 2.2 inches (7.9 x 2.5 x 5.6 cm)   |   Package Dimensions: 1 x 2.1 x 3.2 inches (2.5 x 5.3 x 8.1 cm)

Amazon Price: $28.67 | as of 10/20/2019(2:23am pst)
Availibility: Usually ships in 24 hours
List Price: $31.45

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Mitutoyo Steel Rectangular Gage Block, ASME Grade AS-1, 0.101" Length

Model: 611141-541   |    Mpn: 611141-541   |    Ean: 4946368444291   |    PartNumber: 611141-541   |   Asin: B003U9W54W

The Mitutoyo grade AS-1 rectangular gage block is made of steel, has its nominal length engraved in inches, and is supplied with a Mitutoyo inspection certificate that states that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 grade standard for flatness, length, parallelism, and surface finish. The inspection certificate specifies the deviation of the individual block from its nominal length. Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself.

This grade AS-1 gage block is commonly used for workshop and inspection applications to calibrate fixtures and precision instruments, to inspect a variety of tools such as mounting tools, cutters, fixtures, and mechanical parts, and for gage manufacturing applications. It is made of high-carbon, high-chrome steel which has a high hardness for minimum deterioration, and is selected for its wear-resistance. This gage block has a rectangular base for accurate wringing. Nominal length is measured in inches, and is indicated with laser-etched, black characters. The length of a gage block is usually slightly shorter than its stamped nominal length, to account for the thin layer of oil or wring film used when two or more blocks are wrung together. An identification number is laser-etched on the block for traceability. The block has a depth of 0.355 inches. It comes in a carrying case with a padded, formed interior.

This gage block is supplied with a Mitutoyo inspection certificate [National Institute of Standards in Engineering (NIST)-traceable] that the block meets ASME B89.1.9-2002 standard for flatness, length, parallelism, and surface finish.

Gage blocks (also called gauge blocks, Hoke blocks, Jo blocks, slip gages, and Johansson gages) are blocks used to calibrate measuring equipment and to standardize the measurement of length in manufacturing industries. They are commonly made of precision-ground steel, ceramic, or carbide material, and have a square or rectangular base. Each block has a unique identification number. Length is in inch or millimeter measurement. They can be sold individually, and are also sold in sets with blocks of varying lengths. Gage blocks can be wrung together to create a required length. Wringing is the process of lapping blocks together with a small amount of oil. They are standardized by grade, which refers to the tolerance or deviation of an individual block from its nominal length. Gage block grades are defined for flatness, length, parallelism and surface finish. Some grades of gage blocks meet standards such as ASME, Association for Iron and Steel (AIST), and International Organization for Standards. Application and required level of accuracy dictate which grade of gage block should be used. Some manufacturers provide an internally-generated certificate of inspection to verify that a gage block meets grade standards. Gage blocks can also go through a calibration certification process to verify measurement accuracy. Calibration is performed by an accredited facility. Gage blocks are commonly recalibrated after use to ensure dimensional accuracy. If a gage block does not meet calibration standards, it should no longer be used. Both a certificate of inspection and a calibration certificate specify the deviation from the nominal length.

Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

Features

  • Grade AS-1 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish
  • High-carbon, high-chrome steel provides high hardness and wear-resistance
  • Rectangular base for accurate wringing
  • Nominal length (in inches) indicated with laser-etched, black characters
  • Identification number etched in block for traceability
  • See more on Amazon...

Brand: Mitutoyo   |   Manufacturer: Mitutoyo

Package Dimensions: 0.5 x 2.1 x 3.2 inches (1.3 x 5.3 x 8.1 cm)

Amazon Price: $19.30 | as of 10/20/2019(2:23am pst)
Availibility: Usually ships in 24 hours
List Price: $19.30

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

L.E. Wilson CG-260R Remington Case Gage

Model: CG-260R   |    Mpn: CG-260R   |    Ean: 0857949005029   |    PartNumber: CG-260R   |   Asin: B00OI5LD72

The Cartridge Case Gage was designed with safety in mind and was invented by our founder Sam (L.E.) Wilson in 1935 after a fellow shooter approached him for help in solving a case-separation issue. The gage allows you to see just how much you are sizing back your shoulder on your cases. This is best done by measuring a case in AS-FIRED condition. Take a measurement. Then place back in the gage to see just how much you are sizing the shoulder back. Finally, adjust sizing die accordingly. After sizing your cases, there is a good chance the brass will lengthen. The gage will also check min/max case length and will point out the need for case trimming. This is an essential tool for every reloaded.

Features

  • L.E. Wilson Inc. a family owned and operated business since 1927. And the first to produce the Case Gage in 1935
  • The Wilson Case Gage A one piece gage that will check overall length and indicate min/max case length
  • Measures min/max Headspace. Does not measure body diameters
  • This gage is intended to be used with fired cases to determine a basis for full length sizing and case trimming
  • Made in the U.S.A
  • See more on Amazon...

Brand: L.E. Wilson   |   Manufacturer: L.E. Wilson Inc.

Item Dimensions: 1 x 1 x 3 inches (2.5 x 2.5 x 7.6 cm)   |   Package Dimensions: 2 x 2.1 x 4.1 inches (5.1 x 5.3 x 10.4 cm)

Amazon Price: $38.99 | as of 10/20/2019(2:23am pst)
Availibility: Usually ships in 1-2 business days
List Price: $38.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Oakton WD-35801-74 All-in-One Laboratory pH Electrode, Double Junction, Glass Body, Refillable

 PartNumber: WD-35801-74   |   Asin: B01GIRD00U

oakton instruments WD-35801-74 pH Elect. All-in-One Std, DJRG

Features

  • Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
  • Feature a BNC connector for pH and a mini phono plug connector for temperature
  • See more on Amazon...

Brand: OAKTON instruments   |   Manufacturer: OAKTON instruments

Amazon Price: $213.00 | as of 10/20/2019(2:23am pst)
Availibility: Usually ships in 6-10 business days
List Price: $213.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

FLIR 55903-5125 Model T620-NIST-25 IR Thermal Imaging Camera with NIST Calibration, Wi-Fi and 25 Lens, Built-in Touch Screen 4.3" Wide LCD Display, IR Resolution 640x480 Pixels, Replaces 55903-5122

Model: T620-NIST-25   |    Mpn: 55903-5125   |    Ean: 0845188013035   |    PartNumber: 55903-5125   |   Asin: B00S5AGKPG

FLIR 55903-5125 Model T620-NIST-25 IR Thermal Imaging Camera with NIST Calibration, Wi-Fi and 25 Lens, Built-in Touch Screen 4.3" Wide LCD Display, IR Resolution 640x480 Pixels, Replaces 55903-5122 The professional-grade T620 features all of the imaging capability you need, and the features you want when you've got a demanding workload. With a full suite of powerful image analytics tools like Delta T and MeterLink built right into the camera you can work faster and more efficiently than ever. And, it's rotating lens makes it really easy to get the images you need, even in hard to reach areas

Key Features METERLiNK - Wirelessly transmit vital diagnostic data from clamp and moisture meters directly to the camera for annotating thermal images to further support findings. Crisp thermal images with 307,200 pixels (640x480) for the best detection, pictures, and temperature measurements from long range Tilt the lens system 120 up or down and keep the touchscreen display at eye level to make it easy on yourself to capture images from tough angles Report all the details with 10 measurement spots, 5 box areas, Delta T temperature differential, isotherm, and auto hot/cold markers Specifications Thermal sensitivity (N.E.T.D): Zoom: 4X continuous Focus: Manual or automatic (one shot) Temperature range: -40 C to 650 C (-40 F to 1202 F) Spectral range: 7.5 to 14 m Dimensions: 5.6" x 7.7" x 3.7" Weight (Including Battery): 2.87 lbs (1.3 kg) Included: SD Memory card, 100-260V AC adaptor/charger, two Li-Ion rechargeable batteries, 2-bay battery charger, power supply (with multi-plugs), FLIR Tools software, USB cable, video cable, Bluetooth headset, lens cap, neckstrap, and hard case

Features

  • MSX Thermal Image Enhancement
  • Wi-Fi and FLIR Tools Mobile App
  • Thermal Fusion and Picture in Picture
  • Built-in GPS automatically adds location data to images for including in reports
  • Automatically orients onscreen temperature measurement data whether in portrait or landscape mode
  • See more on Amazon...

Brand: FLIR   |   Manufacturer: FLIR

Amazon Price: $24,784.94 | as of 10/20/2019(2:23am pst)
Availibility: Usually ships in 6-10 business days
List Price: $24,784.94

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Mitutoyo 010010 Angle Block, 20 sec Accuracy, 20 Degree Angle

Model: 10010   |    Mpn: 010010   |    Ean: 4946368595672   |    PartNumber: 010010   |   Asin: B003U9W1MS

20 INDIV ANGLE BLOCK

Features

Brand: Mitutoyo   |   Manufacturer: Mitutoyo

Package Dimensions: 0.4 x 2 x 7 inches (1.0 x 5.1 x 17.8 cm)

Amazon Price: $73.70 | as of 10/20/2019(2:23am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $73.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

MSA Small Full Face Cadet Escape Respirator

 Ean: 0641817106778   |    PartNumber: 10167680   |   Asin: B0742M5W4R

MSA 10167680 CARRIER,PREM CAD ESC G1,APCG11DA301

Features

Brand: MSA   |   Manufacturer: MSA

Amazon Price: $1,912.58 | as of 10/20/2019(2:23am pst)
Availibility: Usually ships in 3-5 weeks
List Price: $1,912.58

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Mitutoyo 010008 Angle Block, 20 sec Accuracy, 10 Degree Angle

Model: 10008   |    Mpn: 010008   |    Ean: 4946368595658   |    PartNumber: 010008   |   Asin: B003U9W1M8

Features

Brand: Mitutoyo   |   Manufacturer: Mitutoyo

Package Dimensions: 0.4 x 2 x 5.7 inches (1.0 x 5.1 x 14.5 cm)

Amazon Price: $73.70 | as of 10/20/2019(2:23am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $73.70

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Mitutoyo 010003 Angle Block, 20 sec Accuracy, 1 Degree Angle

Model: 10003   |    Mpn: 010003   |    Ean: 4946368595603   |    PartNumber: 010003   |   Asin: B003U9W1KK

Features

Brand: Mitutoyo   |   Manufacturer: Mitutoyo

Package Dimensions: 0.2 x 2 x 5.4 inches (0.5 x 5.1 x 13.7 cm)

Amazon Price: $71.85 | as of 10/20/2019(2:23am pst)
Availibility: Temporarily out of stock. Order now and we'll deliver when available. We'll e-mail you with an estimated delivery date as soon as we have more information. Your credit card will not be charged until we ship the item.
List Price: $71.85

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases


    Most Wished For


      Most Gifted


        Top Selling




          Main Categories

          Home & Garden


          Home Improvement


          Electronics


          Office


          Car & Automotive


          Sporting Goods


          Toys and Hobby


          Health & Personal Care


          Beauty Supplies


          Fashion


          Industrial


          Related Categories

          Abrasive & Finishing


          Cutting Tools


          Fasteners


          Filtration


          Commercial Door Products


          Hydraulics, Pneumatics & Plumbing


          Industrial Hardware


          Industrial Tools


          Food Services


          Janitorial & Sanitation


          Lab Equipment


          Material Handling


          Occupational Health


          Packaging & Shipping


          Power Transmission


          Dental Supplies


          Medical Supplies


          Raw Materials


          Retail Fixtures & Equipment


          Tapes, Adhesives & Sealants


          Test, Measure & Inspect


          Robotics, 3D Printing & Science Education


          Industrial Electrical


          
          We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
          Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
          Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
          Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.