Frontpage > Industrial > Test, Measure & Inspect > Ground Resistance Meters

Best Ground Resistance Meters - Buying Guide

Last Updated: 08/22/2019

Share on


  #1

Fluke PRV240 Proving Unit

Model: 4566209   |    Mpn: PRV240   |    Ean: 0768724937926   |    PartNumber: PRV240   |   Asin: B00Z9Z6VQS

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Features

  • PRV240 reduces the risk of shock and arc flash by validating the functionality of test tools without placing yourself in a potentially hazardous electrical environment
  • Sources both ac and dc steady-state voltage - supplies 240 V dc/ac
  • A single LED indicates functionality, making this unit a simple-to-use solution for verification of your test tool
  • Compatible with both high impedance or low impedance multimeters, clamp meters or two pole testers
  • Voltage is sourced through recessed contacts that are activated when tested probes are inserted to avoid accidental contact
  • See more on Amazon...

Brand: Fluke   |   Manufacturer: Fluke

Item Dimensions: 3.86 x 6.38 x 1.73 inches (9.8 x 16.2 x 4.4 cm)   |   Package Dimensions: 1.6 x 3.8 x 6.4 inches (4.1 x 9.7 x 16.3 cm)

Amazon Price: $105.99 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $149.99 | Used Price: $109.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Fluke 4910310 PRV240FS Proving Unit for T6 Electrical Tester

Model: 4910310   |    Mpn: 4910310   |    Ean: 0095969854092   |    PartNumber: 4910310   |   Asin: B074S5R4WX

The PRV240FS proving unit will verify the functionality of your T6 electrical tester without unnecessary exposure to shock or arc flash. Quickly and easily check the functionality of your T6, including the new Field Sense technology, against a known voltage source before and after each measurement. The portable, battery-powered PRV240FS can fit easily in your pocket or tool bag.

Features

  • Verify that the electrical tester is operating properly before and after measurements by providing a fast, safe and reliable source voltage.
  • PRV240FS,Proving Unit, T6/NCV
  • Increase the flexibility of your T6 electrical tester. Verify the functionality of your T6 electric tester with the PRV240FS proving unit. Also included in the bundle is the TPACK hanging strap
  • The bundle includes: T6-1000 200A, 1000V Electrical Tester with Field Sense technology PRV240FS Proving Unit with Field Sense technology TPACK hanging strap
  • See more on Amazon...

Brand: Fluke   |   Manufacturer: Fluke Industrial (Fluke Electronics Corp)

Package Dimensions: 2.4 x 3.27 x 6.57 inches (6.1 x 8.3 x 16.7 cm)

First Available: 2017-10-12

Amazon Price: $137.84 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $169.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

Extech 382252 Earth Ground Resistance Tester Kit

Model: 382252   |    Mpn: 382252   |    Ean: 0094717683588   |    PartNumber: 382252   |   Asin: B00390G3YA

Earth Ground Resistance Tester Kit - 382252 Includes all hardware necessary to measure earth ground in 3 ranges from 20 to 2000Ohm

Features

  • Includes all hardware necessary to measure earth ground in 3 ranges from 20 to 2000 Ohm
  • Large dual display with backlight
  • Test hold function for easy operation
  • automatic zero adjustment
  • AC/DC voltage, resistance, and continuity
  • See more on Amazon...

Brand: Extech   |   Manufacturer: Extech

Item Dimensions: 2 x 3.6 x 7.9 inches (5.1 x 9.1 x 20.1 cm)   |   Package Dimensions: 4.61 x 9.61 x 14.88 inches (11.7 x 24.4 x 37.8 cm)

Amazon Price: $219.60 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $249.99

Warranty: 1 year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

AEMC 6416#2141.01 Ground CLAMP M

Model: 6416   |    Mpn: 6416   |    Ean: 0685338130485   |    PartNumber: 6416   |   Asin: B011OMALYM

The ground resistance Tester 6416 model measures ground rod and grid resistance and impedance without the use of auxiliary Rods. Clamp-On ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under Test it. The 6416 model simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. Three new features unique to AEMC are: Test frequency selection provides more accurate results in inductive environments touch voltage indication indicates the voltage on the display along with a warning buzzer when the voltage derived from current and resistance measurements detect a potentially dangerous touch condition loop resistance indication alerts the user to the fact that the measurement may not be ground resistance the ground resistance Tester models 6416 and 6417, measure ground rod and grid resistance without the use of auxiliary Rods. Clamp-On ground resistance testers can be used in multi-grounded systems without disconnecting the ground system under Test or de-energizing them. The models 6416 and 6417 simply clamp around the ground conductor or rod and measure the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. Two new features unique to AEMC are Test frequency selection and touch voltage indication. The ability to Select the Test frequency provides more accurate results in inductive environments

Features

  • Your unit is calibrated prior to shipment with a new nist-traceable calibration certificate with data
  • The nist calibration provides you assurance your instrument meets manufacturer's specifications. Your instrument is ready to use day one meeting most quality system standards
  • Ground resistance tester 6416 model (clamp-on, alarm, memory) replacement for cat 2117.60 and cat 2117.61
  • Touch voltage display alerts user to potential unsafe conditions
  • Large multi-function, bright yellow organic display (oled) usable in all lighting conditions
  • See more on Amazon...

Brand: AEMC   |   Manufacturer: AEMC

Item Dimensions: 3.8 x 11 x 15 inches (9.7 x 27.9 x 38.1 cm)   |   Package Dimensions: 3.78 x 11.06 x 15 inches (9.6 x 28.1 x 38.1 cm)

First Available: 2018-04-16

Amazon Price: $1,264.50 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $1,264.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

VTSYIQI Digital Clamp Meter Ground Earth Resistance Meter Tester Clamp Earth Resistance Tester ETCR2100A+ 0.01 to1200 Measuring Range LCD Display

 Ean: 0682141323134   |    PartNumber: ETCR2100A+   |   Asin: B07QNTJYBX

Shipping Policy : Battery and Liquid not included during the shipping
ETCR Clamp Earth Resistance Tester is widely applied in ground resistance measurement , loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment, etc. When measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster. ETCR Clamp Earth Resistance Tester can measure the ground fault which can not be measured by traditional method, can apply in the occasion where traditional methods are unworkabl.


Technical Specifications
Function Ground resistance test, Loop resistance test
* Power Supply 6VDC 4 PCS of LR6 lkaline batteries
* Resistance Range:0.01-200
* Resistance Resolution:0.001
* Highest Resistance Accuracy: 1% 0.01
* Data memory:99 Sets
* Alarm Threshold Setting Range:Resistance: 1-199
* Alarm Sound and Light "Beep-beep-beep" alarm tone, Alarm Symbol Flashing, Press AL key to turn on, turn off Alarm or set Alarm Threshold.
Interference Signal Recognition "Beep-beep-beep" tone, NOISE symbol blinking
* Working Temperature and Humidity -20 -55 ;20%RH-90%RH
* LCD Screen 4 Digits LCD display, Screen L W: 47mm 28.5mm
* Clamp Size 32mm
Clamp Opening Extent 32mm
* Tester Weight 1120g
* Clamp Dimension L W T: 260mm 90mm 66mm
* Protection Level Dual Insulation
* Structural Feature Clamp CT
* Shifting Automatic shifting
* External magnetic field 1KHz
* Low Battery Indication Low battery symbol displays when battery is lower then 5.3V
*Standard Accessories: Meter: 1 piece, Test Ring: 1 Piece, Meter Suitcase: 1 Piece
*Optional Accessories: RS232 Interface (Optional)

Features

  • Resistance Range:0.01-200 .Highest Resistance Accuracy: 1% 0.01
  • Structural Feature Clamp CT,and can measure the ground fault which can not be measured by traditional method.
  • Grounding and loop resistance measurement, more reliable quality.
  • Shifting Automatic shifting.Auto Power-off 5 minutes after boot up.
  • Alarm sound and light function,Data memory:99 Sets
  • See more on Amazon...

Brand: VTSYIQI   |   Manufacturer: VTSYIQI

Item Dimensions: 3.94 x 1.97 x 7.87 inches (10.0 x 5.0 x 20.0 cm)   |   Package Dimensions: 3.94 x 9.84 x 13.78 inches (10.0 x 25.0 x 35.0 cm)

Amazon Price: $235.00 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $235.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Megger 250574 3-Piece Color-Coded Test Lead Set for 250260 Digital Ground Resistance Tester

Model: 250574   |    Mpn: 250574   |    PartNumber: 250574   |   Asin: B005T6736Y

The Megger 250574 three-piece test lead set includes three test leads and is for use with the Megger 250260 ground resistance tester. One test lead is 12' (3.6 m) long, one is 31' (9.4 m) long, and one is 50' (15 m) long. The test leads are color-coded to help ensure proper connection.

A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. Other test probes, such as voltage detectors, are built into the meter. Depending on what is to be tested, the probe might either be passive or have active parts that require external power to operate. Some probes require contact for testing, while some are capable of taking measurements from a distance. Some also have finger barriers, insulation, or other features to help protect the operator's hand from electrical shock and burns. Test probes are rated according to the amount of voltage, current, temperature, or other input they can measure. When choosing a test probe, the maximum amount of input that the probe can measure should match or exceed both the maximum amount that can be tested by the test equipment, as well as that of the property expected to be present in the application.

Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Features

  • Includes three test leads: one 12' (3.6 m) long, one 31' (9.4 m) long, and one 50' (15 m) long
  • For use with the Megger 250260 ground resistance tester
  • Test leads are color-coded to help ensure proper connection
  • See more on Amazon...

Brand: Megger   |   Manufacturer: Megger

Package Dimensions: 1.2 x 6.8 x 9.7 inches (3.0 x 17.3 x 24.6 cm)

Amazon Price: $24.00 | as of 08/22/2019(10:45am pst)
Availibility:
List Price:

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Fluke GEO EARTH STAKE Ground Earth Stake with Corkscrew End, For Fluke Earth Ground Testers

Model: GEO EARTH STAKE   |    Mpn: 2539121   |    Ean: 0095969324373   |    PartNumber: 2539121   |   Asin: B005GK4ISO

The Fluke GEO earth stake is used with Fluke 1623 and 1625 earth ground testers to measure the ability of the earth ground system or individual electrode to dissipate energy from the site. The auxiliary stake is used in 2-pole, 3-pole, and 4-pole fall of potential testing, and 3-pole and 4-pole selective testing with current clamp. The stake has a corkscrew end to bore into the ground. The Fluke GEO earth stake is an accessory included in Fluke 1623 and 1625 meter kits.

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Features

  • Earth auxiliary stake is part of a ground system testing set-up to measure the ability of the earth ground system or individual electrode to dissipate energy from the site
  • For use with Fluke 1623 and 1625 earth ground testers, Fluke clamps, and Fluke 25m and 50m cable reels
  • Auxiliary stake is used in 2-pole, 3-pole, and 4-pole fall of potential testing, and 3-pole and 4-pole selective testing with current clamp
  • Stake has corkscrew end to bore into the ground
  • GEO earth stake is an accessory included in Fluke 1623 and 1625 meter kits
  • See more on Amazon...

Brand: Fluke   |   Manufacturer: Fluke Corporation

Package Dimensions: 2.7 x 9.4 x 13.5 inches (6.9 x 23.9 x 34.3 cm)

Amazon Price: $71.95 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $71.95

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Fluke GEO CABLE-REEL 25M Durable Red Cable Reel for Earth Ground Testing, 25m Length

Model: GEO CABLE-REEL 25M   |    Mpn: GEO CABLE-REEL 25M   |    Ean: 0095969324359   |    PartNumber: GEO CABLE-REEL 25M   |   Asin: B005GK4IH0

The Fluke GEO reel with 25m/82ft. of red wire cable is used to connect Fluke 1621, 1623, and 1625 testers to stakes for measuring earth ground resistance. The cable ends terminate with a banana plug and a connector to attach the earth ground tester to the Fluke earth stakes. The red cable reel has a hand crank on top of the reel for winding the cable back on the spool after use. The plug and the connector ends of the cable can be inserted into special slots on the reel to avoid unspooling of the wire.

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Features

  • Cable reel connects to Fluke 1621, 1623, and 1625 earth ground testers for measuring the ability of the earth ground system or individual electrode to dissipate energy from the site
  • Terminates with banana plug and connector to attach earth ground tester to the Fluke earth stakes
  • Hand crank on top of reel for rewinding cable after use
  • Both the plug and the connector can be inserted into top of reel to avoid unspooling of the cable
  • Reel holds 25m length of red cable
  • See more on Amazon...

Brand: Fluke   |   Manufacturer: Fluke Corporation

Item Dimensions: 4.6 x 5.7 x 6 inches (11.7 x 14.5 x 15.2 cm)   |   Package Dimensions: 4.6 x 5.7 x 6 inches (11.7 x 14.5 x 15.2 cm)

Amazon Price: $54.46 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $54.46

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

CAMWAY Digital Multimeter TRMS 9999 Counts Auto-Ranging Backlit VFC NCV Digital Meter, AC/DC Amp Volt Ohm Tester, Capacitance with Test Lead Probe & Banana Plug to Alligator Clips Heavy Duty

Model: 10   |    Mpn: TL357CA   |    Ean: 0784099932557   |    PartNumber: TL357CA   |   Asin: B07F3XRRLW

Electrical tester as a digital multimeter, is widely used in house circuit repairing, in the school, laboratory, factory and other social area. Cancelable Auto-power off meter
Keep press the SELECT button when you turn on the multimeter to use it without auto-power off function
Independent flashlight & backlight
The flashlight and backlight are separately designed, there is no embarrassment that two lights lit up simultaneously.
Auto shut off meter
The digital multimeter will automatically shut off with 15 minutes no operation to save consumption.
Hands-Free Tester
Built-in support backstand for hands-free use, durable rubber cover protects the multimeter from dropping & falling accidents.
Unique VFC Function
Not only make the reading more accuracy but also provides superior accuracy for working on VFD-controlled equipment (such as: air conditioning and washing machine or some industrial equipment) Multimeter Specifications:
DC voltage: 60mV/600mV (1.0% + 3) 6V/600V (0.5% + 5)
DC current: 600 A/600mA (1.0% + 5) 10A (2% + 5)

AC voltage: 60mV/600mV (1.2% + 3) 6V/600V (1.2% + 5)
AC current:600 A/600mA (1.0% + 5) 10A (3% + 5)

Resistance: 600 /6M (0.8% + 5), 60M (1.5% + 5)
Diodes: Forward DC current: 1mA ; Reverse DC current: 3V
Frequency: 99Hz/99.99MHz (2% +5)
AC signal frequency: 10Hz ~ 10kHz (2% + 5)
Continuity Test: If the circuit under testing is less than 30 , the buzzer beeps
Duty Cycle: 10 - 95%, accuracy: 2.0%
Banana Plug to Alligator Clip: Banana Outer Size : 5.1 x 1cm/2" x 0.4"(L*D);Alligator Clip Size : 5.1 x 2 x 0.8cm/2" x 0.8" x 0.31"(L*W*T); Total Length : 80cm /2.62ft Package Included:
1 x Multimeter
2 x Test Leads Probe
2 x 1.5V AAA Batteries
2 x Banana Plug to Alligator Clips
1 x User Manual

Features

  • Advanced Multimeter Auto-Ranging Trms 9999 Counts multimeter, accurately test fundamental electric issues of automotive or household appliances, the electricity issues steward for home users, beginners, maintenance, enthusiasts, electricians or technicians
  • High Security Tester Meet the EC61010-1, CAT IV 600V, CAT III 1000V Secure Standard, build in PTC protection circuit to provide overload & short-circuit protection on all ranges, protecting the multimeter against burning out, decreasing the electronic risk
  • NCV & VFC Function Non contact voltage detection function protects you from any possibility of being shocked by the electricity. The unique VFC function not only let you can work on voltage/frequency converter, but also make the reading more accurate
  • All in One Multimeter Independent Flashlight and Backlight humanized design for visibility in dark areas. Designed OFF position at the middle of dials, sampling times at about 2~3 times/sec, make you test the digital multimeter easier
  • Banana Plug to Alligator Clips Test Lead Cable Wire Dia : 3.5mm/0.14;Male Banana Plug Pin Dia : 4mm/0.16;Alligator Clip Open Width(Max.) : 9mm/0.75 Rated current: 15A MAX, Voltage:1000V
  • See more on Amazon...

Brand: CAMWAY   |   Manufacturer: CAMWAY

Item Dimensions: 1.77 x 2.76 x 5.91 inches (4.5 x 7.0 x 15.0 cm)   |   Package Dimensions: 2.44 x 4.57 x 6.22 inches (6.2 x 11.6 x 15.8 cm)

Amazon Price: $19.99 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Labama Colorful Display Multifunctional TFT Backlight Transistor Tester Ground Resistance Meters

 Ean: 0661958470927   |    PartNumber: LASD036057_1#   |   Asin: B07R8L6SLB

Material: Plastic, Electronic Component
Color: White
Item: Transistor Tester
Diode Range:

Features

  • Material: Plastic, Electronic Component
  • Power Mode: Rechargeable Lithium Battery ( INCLUDED)
  • Resistor: 0.01-50M?
  • Capacitance: 25pF-100mF
  • Features: One button operation, automatically detect and shutdown, and you can press the multi-functional button to close the detector too. It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc. It can also be used to detect infrared waveforms. Not like the usual black and white display, this detector will show results in color
  • See more on Amazon...

Brand: Labama   |   Manufacturer: Labama

Item Dimensions: 1.97 x 5.91 x 5.91 inches (5.0 x 15.0 x 15.0 cm)   |   

Amazon Price: $6.49 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 1-2 business days
List Price: $6.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Megger 1000-525 Earth Test Cable Set for DET3T Digital Ground Resistance Tester

Model: 1000-525   |    Mpn: 1000-525   |    PartNumber: 1000-525   |   Asin: B005T66V9E

The Megger 6220-805 earth test cable set is a replacement cable set for conducting ground resistance tests with a Megger DET3 series ground resistance tester (sold separately). The set includes a 15m red wire, 10m yellow wire, and 4m green wire to replace the original wires included with the tester. The 6220-805 is an accessory for use with a Megger DET3 series ground resistance tester.

Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

Features

  • Three-wire replacement cable set for conducting ground resistance tests
  • Works with a Megger DET3 series ground resistance tester (sold separately)
  • Includes 15m red wire, 10m yellow wire, and 4m green wire
  • See more on Amazon...

Brand: Megger   |   Manufacturer: Megger

Package Dimensions: 1.6 x 5.6 x 6.7 inches (4.1 x 14.2 x 17.0 cm)

Amazon Price: $111.00 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 1-2 business days
List Price: $111.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Megger DET3TC 3-Terminal Digital Ground Resistance Tester, 0.01 to 2000 2% 3d Resistance Range, 0-100 V Ground Voltage Range, ART Capability

Model: DET3TC   |    Mpn: DET3TC   |    PartNumber: DET3TC   |   Asin: B005T63QRO

The Megger DET3 digital ground resistance meter measures ground resistance, voltage, and current for digital ground and bond testing to increase the safety and performance of electrical systems. The unit measures digitally, is autoranging, and has user-selectable 25 or 50V test voltages. The noise rejection feature filters out noise up to 40V peak to peak for more accurate testing in high-noise environments. The meter measures voltage from 0 to 100V, ground current from 0.5mA to 19.9A, and ground resistance from 0.01 to 2000 ohms. The LCD display indicates test results and the status of the batteries for ease of use. The tester is safety rated to European Standards (IEC/EN) 61010-1, Category IV 100V. It is also Ingress Protection 54 (IP54)-rated for protection against dust and splashing water. The DET3 is commonly used by electricians and electrical contractors to help ensure the safety of electrical systems.

Specifications Power supply (8) AA batteries Voltage range 0 to 100V Ground current range 0.5mA to 19.9A Ground resistance range 0.01 to 2000 ohms Weight (including batteries) 1kg/2.2 lb. Safety standards met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat IV 100V Ingress protection (IP) standard met IP54, for protection against dust and splashing water Dimensions 203 x 148 x 78mm/8 x 5.7 x 3.2 inches (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LCD screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has multiple settings corresponding to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to scroll through a list of settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range.

Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

What s in the Box? DET3 3-Terminal Digital Ground Tester Replacement 3-wire lead set (2) Ground test stakes Hard carry case (8) AA batteries Instructions

Features

  • Ground resistance meter for measuring ground resistance, voltage, and current for digital ground and bond testing
  • Digital meter with autoranging measurement and user-selectable 25 or 50V test voltage
  • Noise rejection up to 40V peak to peak for accurate testing in noisy environments
  • Measures voltage from 0 to 100V, ground current from 0.5mA to 19.9A, and ground resistance from 0.01 to 2000 ohms
  • Safety rated to IEC/EN 61010-1 Category IV 100V and IP rated to IP54
  • See more on Amazon...

Brand: Megger   |   Manufacturer: Megger

Package Dimensions: 4.3 x 11 x 12.4 inches (10.9 x 27.9 x 31.5 cm)

Amazon Price: $985.00 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 2 to 4 weeks
List Price: $985.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

IDEAL INDUSTRIES INC. 61-796 Earth Ground Resistance Tester, 3-Pole, Carrying Case Included

Model: 61-796   |    Mpn: 61-796   |    Ean: 0783250667659   |    PartNumber: 61-796   |   Asin: B005HQZCNC

The Ideal 61-796 earth ground tester performs 2-point and 3-point fall-of-potential or simplified ground resistance testing when it is not possible to use auxiliary ground stakes, and measures ground voltage for new and existing buildings, structures, equipment, and electrical systems. The auto-ranging feature automatically determines the correct value range for the measurements. The data hold function with screen icon allows the user to retain the measurements on the display for manual recording. The battery indicator alerts the user when batteries are low to ensure accurate measurements. When in use, the 2 milliAmp (mA) measuring current does not trip ground fault breakers of the circuit under test. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing.

The Ideal 61-796 tester comes with a set of three test leads, two auxiliary earth spikes, a simplified measurement probe, a hard carrying case, and an instruction manual. Applicable safety standards are IEC/EN 61010-1 and Installation CAT III 200V. The meter is rated for use at pollution degree 2.

Specifications Earth resistance ranges and resolutions 0 - 20 range (0.01 resolution); 0 - 200 range (0.1 resolution); 0 - 2000 range (1 resolution) Earth resistance accuracy + or - 2% reading + 2 digits or + or - 0.1Ω Maximum earth voltage 0-200V AC, 40-500Hz Earth voltage accuracy + or - 1% reading + 2 digits Operating humidity 80 percent Operating temperature 32 to 104 degrees F Power source (8) 1.5V AA batteries (included) Weight 1361g/3lbs. (including batteries) Dimensions 210 x 210 x 100mm (H x W x D) H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Ground-resistance meters test the condition of a grounding system, and provide resistivity measurements in ohms. The meters are available in digital, analog, and clamp models. Grounding systems protect people and equipment, and provide a safe path for the dissipation of fault currents, lightning strikes, static discharges, EMI and RFI signals, and interference. Regular testing of a grounding system is important for safety and protection of equipment. For example, corrosive soil with high moisture content can degrade ground rods and connections in existing systems and increase the resistance of the system. Ground-resistance meters are used in conjunction with a variety of testing methods to troubleshoot intermittent electrical problems or as part of a regular maintenance plan.

Ideal Industries manufactures test and measurement equipment, electrical supplies, and tools, among other products. The company, founded in 1916, is headquartered in Sycamore, IL.

What s in the Box? Ideal 61-796 earth ground tester TL-796 Lead set kit with (3) measuring leads: red 33m, yellow 33m, green 5m (2) Auxiliary earth spikes Simplified measurement probe (8) 1.5V AA alkaline batteries Hard case Instructions

Features

  • Performs resistance testing of grounding systems using 2-pole and 3-pole fall-of-potential methods, simplified earth resistance testing, and earth AC voltage testing
  • Auto-ranging feature determines the correct value range for measuring ground resistance
  • Does not trip ground fault breakers of the circuit under test
  • Data hold function keeps the last reading on the display after disconnecting from the circuit under test, which allows user to record measurements when convenient
  • Includes set of three test leads (red 33m, yellow 33m, green 5m), two auxiliary stakes, simplified measurement probe, hard carrying case, and instruction manual
  • See more on Amazon...

Brand: Ideal Industries   |   Manufacturer: Ideal Industries

Item Dimensions: 8 x 8.5 x 10 inches (20.3 x 21.6 x 25.4 cm)   |   Package Dimensions: 7.8 x 8.6 x 9.9 inches (19.8 x 21.8 x 25.1 cm)

Amazon Price: $554.75 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $561.97 | Used Price: $473.46

Warranty: 2 Years

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Megger DET24C Digital Clamp-On Ground Resistance Meter with Data Storage & Downloading

Model: 1007-331   |    Mpn: DET24C   |    Ean: 0642896278127   |    PartNumber: DET24C   |   Asin: B00883AJAW

The Megger DET24C digital clamp-on ground resistance meter measures ground resistance in multi-ground electrical installations and lightning protection systems without needing to disconnect the ground in electrical testing applications. It has a clamp with two jaws that can close around round cables and rods up to 1.45" (37 mm) in diameter and ground tapes and straps up to 1.96" (50 mm) wide to measure resistance without disconnecting the ground. The meter also provides true RMS (root mean square) measurements of current up to 35 amp to help ensure operator safety during operation. The meter has a user-selectable noise filter to allow measurements to be taken in areas with high amounts of electrical noise. The meter's internal data storage allows multiple results to be compared and tracked over time, and readings are date and time stamped. It comes with a software that provides a graphic user interface for working with the data on a computer. An alarm notifies user when user-selected minimum and maximum values for current and resistance are reached or exceeded. The hold function keeps a reading on the display, even after the meter is disconnected. In applications where the conductor is difficult to access, an auto-hold feature allows a reading to be captured without requiring the operator to press the button during measurement. The meter's liquid crystal display (LCD) is backlit to provide readability in low light. The clamp jaws have a smooth surface with no interlocking teeth to help prevent build-up of dirt and residue, which can interfere with measurements. The unit automatically turns off after five minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. This Megger earth test clamp-on ground resistance meter meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 600V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices. The meter has a wrist strap and comes with a hard plastic carrying case to protect the meter from damage during transport and storage. A finger guard on the body of the meter helps protect fingers from shock. Specifications Maximum ground resistance input 1,500 ohms Maximum ground current input 35 amp Standards met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1, EN61557, European Conformity (CE) marked, Australia NEC 13177 Power supply 1.5V IECLR6 AA batteries (four, included) Weight 2.17 lb./985 g Dimensions 9.7 x 4.4 x 2.0 inches/248 x 114 x 49 mm (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Electrical test meters report electrical circuit properties, such as voltage, resistance, capacitance, and continuity. Available in handheld or benchtop form, they detect electrical problems in equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Single-function meters, such as battery testers and voltage testers, measure one property of a circuit, and multimeters measure multiple properties. Electrical test meters display information either in analog form using a needle that moves on a calibrated scale, or in digital form using digits or a graphic representation on an LED screen. Meters have electrical properties that are to be measured and the anticipated range of results, and should have a rating that is higher than the maximum value of the anticipated range. An electrical test meter has multiple settings corresponding to potential ranges of values for the properties it can measure. A manual ranging meter requires the operator to flip through different settings until the correct range is reached. An autoranging meter cycles through range settings automatically until it reaches the correct range.

Megger manufactures equipment for cable fault locating, protective relay testing, telecommunications and data integrity, and power quality testing under multiple brand names, among them Megger, Biddle, States, and AVO. The company, founded in 1889, is headquartered in Dover, England, and meets International Organization for Standardization (ISO) 9001:2008 standards.

What s in the Box?

DET24C digital earth test clamp-on meter (4) 1.5V IECLR6AA batteries Check loop Software CD Wrist strap Calibration check Carrying case Instructions

Features

  • Digital clamp meter measures ground resistance and current in multi-ground installations without needing to disconnect the ground
  • Provides true RMS (root mean square) measurements of current to help ensure operator safety during operation. User-selectable noise filter allows measurements to be taken in areas with high amounts of electrical noise
  • Data storage allows multiple results to be compared and tracked over time, and data can be uploaded to a computer for further analysis with the included software
  • Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 600V
  • Content: 1 of each PN 1007-331 DET24C, 1 of each PN 1001-498 Check Loop, 4 of each PN 25511-841 BATTERY 1.5V ALKALINE AA, 1 of each PN 1001-716 WRIST STRAP, 1 of each PN 2001-644 Quick Start Guide, 1 of each PN 1000-576 Power Db Lite CD, 1 of each PN 1001-198 USER GUIDE CD DET14C / DET24C, 1 of each PN 2000-231 WARRANTY / CER of TEST [1 YEAR] MEGGER
  • See more on Amazon...

Brand: Megger   |   Manufacturer: Megger

Package Dimensions: 4.3 x 11 x 12.4 inches (10.9 x 27.9 x 31.5 cm)

Amazon Price: Too low to display | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $1,765.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

AEMC 4620 4-Point Ground Resistance Tester Kit, 2000 Ohms Resistance, 10mA Current with 150' Leads

Model: 4620 Kit-150ft   |    Mpn: 2135.19   |    Ean: 0685338130300   |    PartNumber: 2135.19   |   Asin: B008S09LT0

The AEMC 4620 digital ground resistance tester with 150 ft. leads performs 4-point soil resistivity, 2- and 3-point ground resistance, step voltage, touch potential, and continuity tests in rugged conditions, such as field maintenance crews performing numerous tests. The direct reading tester measures from 0 to 2000Ω, with auto-ranging that automatically determines the optimum resistance range and test current. It is designed for ease of use, with connect press read operation, a large easy-to-read LCD screen, user alerts, and color-coded terminals that match color-coded leads and probes. Ground-resistance meters are used by electricians and contractors working in industrial, utility, and field servicing.

The AEMC 4620 tester is engineered to reject high levels of noise and interference for use under difficult conditions, such as high stray currents that normally affect accuracy. It exceeds IEC mechanical and safety specifications for shock, vibration, and drop tests. The kit includes two color-coded 150ft. leads on spools (one red, one blue), one 30ft. lead (green), two 14.5" T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100ft. tape measure, and a safety-yellow carrying bag. Safety ratings include EN 61010-1, 150V CAT III, 300V CAT III, and pollution degree 2. The double-insulated product is UL approved and CE marked.

Specifications Measurement range Autoranging 0.00 to 19.99Ω/20.0 to 199.9Ω/200 to 1999Ω Test current 10mA/1mA/0.1mA Resistance measuring frequency 128Hz square wave Accuracy (% of reading) + or - 2% reading + or - 1ct/ + or - 5% of reading + or 3cts Operating temperature range -10 to 55 degrees C/14 to 131 degrees F Response time ~ 6 seconds for stabilized measurement Power source (8) 1.5V C cell batteries (included) Weight 7.75lbs./3.5kg Dimensions 240 x 185 x 110mm/9.45 x 7.28 x 4.33" (H x W x D) H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Ground-resistance meters test the condition of a grounding system, and provide resistivity measurements in ohms. The meters are available in digital, analog, and clamp models. Grounding systems protect people and equipment, and provide a safe path for the dissipation of fault currents, lightning strikes, static discharges, EMI and RFI signals, and interference. Regular testing of a grounding system is important for safety and protection of equipment. For example, corrosive soil with high moisture content can degrade ground rods and connections in existing systems and increase the resistance of the system. Ground-resistance meters are used in conjunction with a variety of testing methods to troubleshoot intermittent electrical problems or as part of a regular maintenance plan.

AEMC Instruments manufactures electrical testing and measurement instruments, including clamp meters, power quality analyzers, ground resistance testers, and data loggers. The company, founded in 1893, is headquartered in Foxborough, MA.

What s in the Box? AEMC ground resistance tester model 4620 (2) 150ft. leads on spools (red/blue) 30ft. lead (green) (2) 14.5" T-shaped auxiliary ground electrodes (5) Spaded lugs Tape measure, 100ft. Carrying case

Features

  • Performs 4-point soil resistivity, 2- and 3-point ground resistance testing, step voltage tests, and touch potential measurements, and is suitable for rugged field conditions
  • Direct reading tester measures from 0 to 2000Ω, withauto-ranging that automatically determines the optimum resistance range and test current
  • Color-coded terminals match the color-coded leads
  • Designed for ease of use, with connect-press-read operation, a large easy-to-read LCD display, and user alerts
  • Kit includes two 150ft. leads on spools, one 30ft. lead, two 14.5 T-shaped auxiliary ground electrodes, one set of five spaded lugs, 100ft. tape measure, and safety-yellow carrying bag
  • See more on Amazon...

Brand: AEMC   |   Manufacturer: AEMC

Package Dimensions: 12.2 x 16.5 x 24.2 inches (31.0 x 41.9 x 61.5 cm)

First Available: 2017-05-15

Amazon Price: $1,386.05 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 1-2 business days
List Price: $1,386.05

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

AEMC 6417 (2141.02) Ground Resistance Tester

Model: 6417   |    Mpn: 6417   |    Ean: 0685338130492   |    PartNumber: 6417   |   Asin: B00J3AU28S

The ground resistance Tester 6417 model measures ground rod and grid resistance and impedance without the use of auxiliary Rods. Clamp-On ground resistance testers can be used in multi-grounded systems without disconnecting or de-energizing the ground system under Test it. The 6417 model simply clamps around the grounding electrode or conductor and measures the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. Three new features unique to AEMC are: Test frequency selection provides more accurate results in inductive environments touch voltage indication indicates the voltage on the display along with a warning buzzer when the voltage derived from current and resistance measurements detect a potentially dangerous touch condition loop resistance indication alerts the user to the fact that the measurement may not be ground resistance the ground resistance Tester models 6416 and 6417, measure ground rod and grid resistance without the use of auxiliary Rods. Clamp-On ground resistance testers can be used in multi-grounded systems without disconnecting the ground system under Test or de-energizing them. The models 6416 and 6417 simply clamp around the ground conductor or rod and measure the resistance to ground. By performing measurements on intact ground systems, the user also verifies the quality of the grounding connections and bonds. Resistance and continuity of grounding loops around pads and buildings may also be measured. Two new features unique to AEMC are Test frequency selection and touch voltage indication. The ability to Select the Test frequency provides more accurate results in inductive environments

Features

  • Your unit is calibrated prior to shipment with a new nist-traceable calibration certificate with data
  • The nist calibration provides you assurance your instrument meets manufacturer's specifications. Your instrument is ready to use day one meeting most quality system standards
  • Ground resistance tester 6417 model (clamp-on, bluetooth, alarm, memory, dataview software)
  • Touch voltage display alerts user to potential unsafe conditions
  • Large multi-function, bright yellow organic display (oled) usable in all lighting conditions
  • See more on Amazon...

Brand: AEMC   |   Manufacturer: AEMC

Item Dimensions: 4.3 x 11 x 15 inches (10.9 x 27.9 x 38.1 cm)   |   Package Dimensions: 3.86 x 10.98 x 15.12 inches (9.8 x 27.9 x 38.4 cm)

First Available: 2018-04-16

Amazon Price: $1,605.50 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 24 hours
List Price: $1,605.50

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

Akozon Earth Resistance Tester PM5203 Digital Insulation Resistance Tester Megohmmeter AC DC Voltage Tester Analog Display 50-1000V Meter Automatic Calculation

 Ean: 0654936634251   |    PartNumber: Akozonqew2xnvous   |   Asin: B07Q9939V9

Specification:
Technical Parameter
Insulation Test:
Output Voltage:50V(0 %~+20%) ,Measuring Range:0.01M ~50M (3%+5)
Output Voltage:100V (0%~+20%),Measuring Range:0.01M ~100M (3%+5)
Output Voltage:250V (0%~+20%),Measuring Range:0.01M ~250 M (3%+5)
Output Voltage:500V (0%~+20%),Measuring Range:0.01M ~500M (3%+5), 1.00G ~5.00G (5%+0.1G )
Output Voltage:1000V (0%~+20%) ,Measuring
Range:5.00G ~10.00G (10%+0.2G )

Multimeter Functions
DC Voltage Test :Measuring Range:0.1~1000V 0.5%
AC Voltage Test:Measuring Range:0.1~50V 1%
Continuity Test:Measuring Range:0.01 ~200 0.5%
Short Circuit Current:1.8mA

Characteristics
Auto Calculate PI and DAR
Data Storage/Loading
Data Comparision
Auto Discharge for Capacitive Load
Timer Function for Insulation Test
Lock Function For Insulation Test
Low Battery Indication
DC/AC Voltage Test
Continuity Test
Auto Power Off
Digital and Analog Display

General Parameter
Brand :PEAKMETER
Model :PM5203
Power Supply :6 x 1.5V AA Batteries (NOT included)
Item Size :19*15*7cm / 7.48*5.91*2.76in
Weight Approx.:1977g
Safety Rating :CE CAT.III 1000V CAT IV 600V RoHS

Package Includes:
1 x PM5203 Digital Insulation Tester
1 x User Manual
2 x Alligator Clips
2 x Test Leads
1 x Hand Bag
1 x Sling

Features

  • High Quality Material This PM 5203 Earth Resistance tester is a professional instrument in detecting ground resistance of the electrical equipment. Upgraded from the traditional ground resistance meter with its circuit, structure and techniques. Now present as fashionable, precise and easy operational.
  • Measurement Mode Gear selection,you can choose the measurement range you want,so that you can use in many situations.Powered by 6 AA batteries (NOT included).This Earth Resistance tester also has Maximum/minimum/average measurement function.It Can also be used to AC/DC voltage measurement and continuity test. Automatic calculation of PI (polarization index) and DAR (dielectric absorption ratio).
  • Easy Reading This Digital megohmmeter has Large digital LCD and backlight applied to the meter facilitate users to read the information on LCD.Large-screen high-definition backlight: Press the backlight button to turn the backlight on or off.And this Earth Resistance tester Display: has analog bar and digital dual display function.Under voltage indication.This Earth Resistance Test the insulation resistance with 50V-1000V voltage.
  • Widely Used Resistance Meter Tester is small and easy to carry. Applicable to the shop, postal, railway, roommate, chemical, communications, mining and other departments to measure the grounding resistance of various devices,such as Suitable for high voltage tower measurement, grid grounding measurement, lightning rod measurement.Check the insulation of high voltage electrical equipment such as motor, transformer, cable, etc.
  • Excellent Design This grounding resistance meter has double insulation protection for safer measurement.The multi-slot card-type protective sleeve is closely fitted with the meter, so that the meter is non-slip and anti-fall.The meter is capable of storing up to 28 groups of measurement data.Lock function: lock data during insulation test.Timing function: timing function during insulation test.Automatic discharge: the meter will automatically discharge when the load is capacitance.
  • See more on Amazon...

Brand: Akozon   |   Manufacturer: Akozon

Package Dimensions: 4.33 x 10.63 x 13.78 inches (11.0 x 27.0 x 35.0 cm)

Amazon Price: $138.99 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 1-2 business days
List Price: $138.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

Amprobe DGC-1000A Clamp Ground Resistance Tester

Model: DGC-1000A   |    Mpn: 2731217   |    Ean: 0095969366311   |    PartNumber: 2731217   |   Asin: B0028YKOM0

Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.

Features

  • Ground resistance tester for measuring ground resistance, current, and continuity in multi-grounded systems
  • True RMS meter provides accurate readings when measuring linear or non-linear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform
  • Clamp-on head to measure resistance on a ground rod without the use of additional ground rods and without disconnecting the grounds under test
  • Measures ground resistance from 0.025 to 1,500 ohms and AC current up to 10A
  • Safety rated to European Standard 61010-2-32 Category III 300V, Category II 600V
  • Continuity beep if the resistance is lower than 40.00 Ohms
  • Data logging capability - 116 records
  • Large LCD display
  • Low battery indicator
  • Auto power off (can be disabled)
  • See more on Amazon...

Brand: Amprobe   |   Manufacturer: Amprobe

Package Dimensions: 3 x 6.3 x 13.5 inches (7.6 x 16.0 x 34.3 cm)

Amazon Price: $1,191.93 | as of 08/22/2019(10:45am pst)
Availibility: Usually ships in 1 to 3 months
List Price: $1,699.95

Warranty: One Year Limited Warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Fluke PRV240 Proving Unit
  2. Fluke 4910310 PRV240FS Proving Unit for T6 Electrical Tester
  3. Extech 382252 Earth Ground Resistance Tester Kit
  4. AEMC 6416#2141.01 Ground CLAMP M
  5. VTSYIQI Digital Clamp Meter Ground Earth Resistance Meter Tester Clamp Earth Resistance Tester ETCR2...
  6. Megger 250574 3-Piece Color-Coded Test Lead Set for 250260 Digital Ground Resistance Tester
  7. Fluke GEO EARTH STAKE Ground Earth Stake with Corkscrew End, For Fluke Earth Ground Testers
  8. Fluke GEO CABLE-REEL 25M Durable Red Cable Reel for Earth Ground Testing, 25m Length
  9. CAMWAY Digital Multimeter TRMS 9999 Counts Auto-Ranging Backlit VFC NCV Digital Meter, AC/DC Amp Vol...

Most Wished For

  1. Fluke PRV240 Proving Unit
  2. Fluke 4910310 PRV240FS Proving Unit for T6 Electrical Tester
  3. Extech 382252 Earth Ground Resistance Tester Kit
  4. AEMC 6416#2141.01 Ground CLAMP M
  5. VTSYIQI Digital Clamp Meter Ground Earth Resistance Meter Tester Clamp Earth Resistance Tester ETCR2...
  6. Megger 250574 3-Piece Color-Coded Test Lead Set for 250260 Digital Ground Resistance Tester
  7. Fluke GEO EARTH STAKE Ground Earth Stake with Corkscrew End, For Fluke Earth Ground Testers
  8. Fluke GEO CABLE-REEL 25M Durable Red Cable Reel for Earth Ground Testing, 25m Length
  9. CAMWAY Digital Multimeter TRMS 9999 Counts Auto-Ranging Backlit VFC NCV Digital Meter, AC/DC Amp Vol...

Most Gifted

  1. Fluke PRV240 Proving Unit
  2. Fluke 4910310 PRV240FS Proving Unit for T6 Electrical Tester
  3. Extech 382252 Earth Ground Resistance Tester Kit
  4. AEMC 6416#2141.01 Ground CLAMP M
  5. VTSYIQI Digital Clamp Meter Ground Earth Resistance Meter Tester Clamp Earth Resistance Tester ETCR2...
  6. Megger 250574 3-Piece Color-Coded Test Lead Set for 250260 Digital Ground Resistance Tester
  7. Fluke GEO EARTH STAKE Ground Earth Stake with Corkscrew End, For Fluke Earth Ground Testers
  8. Fluke GEO CABLE-REEL 25M Durable Red Cable Reel for Earth Ground Testing, 25m Length
  9. CAMWAY Digital Multimeter TRMS 9999 Counts Auto-Ranging Backlit VFC NCV Digital Meter, AC/DC Amp Vol...

Top Selling

  1. Fluke PRV240 Proving Unit
  2. Fluke 4910310 PRV240FS Proving Unit for T6 Electrical Tester
  3. Extech 382252 Earth Ground Resistance Tester Kit
  4. AEMC 6416#2141.01 Ground CLAMP M
  5. VTSYIQI Digital Clamp Meter Ground Earth Resistance Meter Tester Clamp Earth Resistance Tester ETCR2...
  6. Megger 250574 3-Piece Color-Coded Test Lead Set for 250260 Digital Ground Resistance Tester
  7. Fluke GEO EARTH STAKE Ground Earth Stake with Corkscrew End, For Fluke Earth Ground Testers
  8. Fluke GEO CABLE-REEL 25M Durable Red Cable Reel for Earth Ground Testing, 25m Length
  9. CAMWAY Digital Multimeter TRMS 9999 Counts Auto-Ranging Backlit VFC NCV Digital Meter, AC/DC Amp Vol...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.