Frontpage > Industrial > Test, Measure & Inspect > Temperature & Humidity

Best Temperature & Humidity - Buying Guide

Last Updated: 01/15/2019

Share on


  #1

General Tools MMD4E Moisture Meter, Pin Type, Digital LCD

Model: MMD4E   |    Mpn: MMD4E   |    Ean: 0522536779064   |    PartNumber: MMD4E   |   Asin: B00275F5O2

General Tools MMD4E Moisture Meter, Pin Type, Digital LCD

Features

  • Moisture meter features an easy-to-read LCD display for quick and easy viewing; ergonomic size fits in one hand
  • Ideal for contractors and homeowners to measure moisture content in wood, concrete drywall and subflooring; essential water damage tool
  • Moisture detector has a wide and precise measuring range; stick the stainless steel pins into the surface of what you are measuring in order to get a read-out
  • Never buy water logged wood again; woodworking tool measures the moisture content of wood before buying;Auto power off
  • Can be used as a water leak detector after flood damage, or general water damages
  • See more on Amazon...

Brand: General Tools   |   Manufacturer: General Tools

Item Dimensions: 1.4 x 9.5 x 5.55 inches (3.6 x 24.1 x 14.1 cm)   |   Package Dimensions: 1.2 x 5.4 x 9 inches (3.0 x 13.7 x 22.9 cm)

Amazon Price: $22.72 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $49.95 | Used Price: $17.99

Warranty: 1 Year

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

Etekcity Lasergrip 800 Digital Infrared Thermometer Laser Thermometer Temperature Gun Non-contact -58 - 1382 (-50 to 750 ), Instant Read Thermometer for Meat Refrigerator Pool Oven

Model: Lasergrip 800   |    Mpn: 025706347549   |    Ean: 0025706347549   |    PartNumber: 025706347549   |   Asin: B00DMI62HM

NOTE
1. The measuring surface is about 2cm below the infrared aiming point.
2. For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17inches (36cm).

Simple Operation - Point and Click!

Are you looking for an easy way to get accurate temperature measurements? If so, this Etekcity non-contact IR temperature gun is exactly what you need. Just by one press of the trigger, this thermometer will turn on, the laser pointer shows target and the big LCD will read the temperature in less than 0.8 second.

16:1 High distance spot ratio!
This means you may measure the temp of a smaller area at the same distance compared to other 8:1 or 12:1 thermometers; thus the readings are much more accurate!

Features
1.Laser targeting system for more precise aiming;
2.Greater distance-spot ratio offers accurate results at longer distances;
3.Safely measure hazardous or inaccessible objects;
4.Standard 9V battery offers 14 hours of cumulative use;
5.Auto-shutoff after 15 seconds to increase battery life;
6.Instant-read-display on LCD.

Specifications
Temperature Range: -58 1382 (-50 750 )
Accuracy: 2%
Distance Spot Ratio: 16:1
Emissivity Adjustable: 0.95(fixed)
Response Time and Wavelength: 500ms and (8-14)um
Repeatability: 1% or 1
Resolution: 0.1 or 0.1

Package Included
1x Etekcity Lasergrip 800 thermometer
1x 9V DC battery
1x User's manual
2 Year Warranty by Etekcity

Features

  • BETTER ACCURACY: The Distance to Spot Ratio is 16:1, meaning the Lasergrip 800 can accurately measure targets at larger measurement area with the same distance compared with other thermometers with DSR 12:1 or 8:1
  • TARGET QUICKER: Measure surface temperature ranging from -58 ~1382 / -50 ~ 750 , you can choose the unit from / ; A built in Laser gives you the precision to hone in on the exact space you want to measure
  • ADDED FUNCTIONS: The LCD screen is backlit, it also has an Auto-Off function to extend the battery life and features a low battery indicator so you never accidentally run out of juice (battery included)
  • VERSATILE DESIGN: Infrared Technology makes this thermometer handy to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points; Use it when you are cooking and barbequing, performing auto maintenance, doing home repairs, and a host of other tasks
  • NOTE: For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36cm); Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct; FDA, FCC, CE approved; Class 2 laser, optical power 0.5-0.9mW; 2 -Year Warranty by Etekcity
  • See more on Amazon...

Brand: Etekcity   |   Manufacturer: Etekcity

Item Dimensions: 1.81 x 4.96 x 9.21 inches (4.6 x 12.6 x 23.4 cm)   |   Package Dimensions: 1.42 x 3.62 x 8.98 inches (3.6 x 9.2 x 22.8 cm)

Amazon Price: $25.99 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.99 | Used Price: $25.47

Warranty: 2 year-warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

General Tools MMD7NP Moisture Meter, Pinless, Digital LCD with Tricolor Bar Graph

Model: MMD7NP   |    Mpn: MMD7NP   |    Ean: 5448095857317   |    PartNumber: MMD7NP   |   Asin: B00HARYVUQ

General's Non-Penetrating LCD Moisture Meter with Tricolor Bar Graph is ideal for DIY enthusiasts, woodworkers, contractors, building inspectors and water damage remediates. Includes 1 9V battery and user's manual. 1 Year Warranty. GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

Features

  • Moisture detector is non-invasive, non-marring and is ideal for detecting moisture under finished surfaces
  • The water leak detector has separate settings for drywall, masonry, softwoods and hardwoods
  • Moisture detection tool has a 3/4 inch (20mm) maximum sensing depth and +/-4% accuracy on wood
  • Wood working tool is auto-calibrating and operates on 9V battery; 2-inch diagonal backlit LCD screen and a 3-color LED bar graph
  • Moisture meter features HOLD button, auto power-off function, out-of-range alarm and low battery indication
  • See more on Amazon...

Brand: General Tools   |   Manufacturer: General Tools Mfg Co In

Item Dimensions: 6.5 x 3 x 1.13 inches (16.5 x 7.6 x 2.9 cm)   |   Package Dimensions: 1.5 x 7 x 10 inches (3.8 x 17.8 x 25.4 cm)

Amazon Price: $38.00 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.98 | Used Price: $31.74

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

BLACK+DECKER TLD100 Thermal Leak Detector

Model: TLD100   |    Mpn: TLD100-XJ   |    Ean: 6942469351191   |    PartNumber: TLD100-XJ   |   Asin: B0044R87BE

Heating and cooling accounts for about 50 percent of your energy usage, but the average house has enough leaks and drafts to equal a 1 sq. ft. hole. Cut down on wasteful spending with the help of the Thermal Leak Detector from Black and Decker .The TLD100 is an infrared sensor that finds these leaks along walls, molding, ductwork and more. Auto color change provides quick, intuitive feedback, showing users where to caulk, insulate, etc.

The Black & Decker thermal leak detector helps you increase the efficiency of your home's insulation by finding leaky areas that can lead to higher heating and cooling bills. You'll instantly identify problem areas around drafty windows and doors, and uncover hidden leaks and insulation "soft spots" around your home. Check windows, ducts, and walls with the thermal reference light that indicates hot and cold spots. You can even use the detector to diagnose engine misfires or check your refrigerator and freezer settings. ul.indent {list-style: inside disc;text-indent: 20px;}img.withlink {border:1px black solid;}a.nodecoration {text-decoration: none}
The TLD100 lets you identify weak spots that can lead to high energy bills. View larger. Easy-to-Read Color Coding and Screen
The thermal leak detector makes it easy to monitor your home's energy efficiency by finding areas that let heat out and cold air in. Simply set the detector's temperature tolerances to one, five, or 10 degrees and scan the light across the area you want to inspect. The light will change to red for warmer spots and blue for cooler spots to detect air leaks in both warm and cool weather. The detector also displays temperatures in either Fahrenheit or Celsius on the LCD screen. Check for drafts or leaks around your fireplace, recessed lighting, electrical outlets, along floor molding, or any place that may have improper seals, caulking, or seams that aren't immediately visible. An included booklet gives you tips and instructions on how to seal leaks and improve insulation. Cut Energy Bills and Improve Your Home's Efficiency
Sealing the leaks and improving insulation in your home can help you save as much as 20 percent on your heating and cooling bills. An efficient, greener home will stay cooler in summer and warmer in winter, increasing its resale value. Multiple Uses to Handle Uncommon Tasks
Use the thermal leak detector to check your refrigerator and freezer temperatures and efficiency. Diagnose engine problems related to overheating or coolant leaks to avoid costly repairs and mechanic bills down the road. The thermal leak detector can also check the operation of your HVAC system, so you can perform preventative maintenance as needed. The Black & Decker thermal leak detector is covered by a two-year warranty. What's in the Box
Thermal leak detector, five-step guide on how to insulate and seal your house
Sealing leaks and improving your home's insulation can help you save as much as 20 percent on energy bills.

Features

  • Uses infrared sensors to measure surface temperatures
  • Helps homeowners track down power-draining drafts
  • Sold with a 5-step guide to fixing basic energy leaks and comes with the thermal leak detector
  • Plugging leaks can save up to 20 percent on heating and cooling costs
  • Backed by a two-year warranty
  • See more on Amazon...

Brand: BLACK+DECKER   |   Manufacturer: Black & Decker

Item Dimensions: 3.54 x 7.28 x 1.97 inches (9.0 x 18.5 x 5.0 cm)   |   Package Dimensions: 2.8 x 4.2 x 9.8 inches (7.1 x 10.7 x 24.9 cm)

Amazon Price: $33.21 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $35.36 | Used Price: $27.74

Warranty: 2 Years

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

AcuRite 00613 Humidity Monitor with Indoor Thermometer, Digital Hygrometer and Humidity Gauge Indicator

Model: 00613B   |    Mpn: 00613B   |    Ean: 8852274138451   |    PartNumber: 00613B   |   Asin: B0013BKDO8

The AcuRite 00613 Indoor Humidity Monitor provides all the home comfort information you need, at a glance. Featuring a precision indoor thermometer and hygrometer, and an easy-to-read LCD display, it shows current indoor humidity and temperature, plus daily high and low records. A handy home comfort icon makes it effortless to tell if your indoor humidity is too high, too low, or "OK." Multiple mounting options include a convenient clip, magnets for attaching to a metal surface like a refrigerator, or you can stand it upright on a tabletop. Limited one-year warranty. It's more than accurate, it's AcuRite.

Features

  • Indoor thermometer displays temperature in Fahrenheit or Celsius. Indoor Temperature Range: 32 to 122 degrees Fahrenheit; 0 to 50 degrees Celsius
  • Humidity gauge shows the comfort level of your home, based on current humidity level
  • Track conditions throughout the day with the high and low records to ensure a healthy home.
  • Humidity meter features a magnet-mountable design, fold-out stand and clip; Powered by (1) AA battery (not included)
  • Includes limited 1-year warranty; Knowledgeable US-based customer service team
  • See more on Amazon...

Brand: AcuRite   |   Manufacturer: Chaney Instruments

Item Dimensions: 3 x 1.3 x 2.5 inches (7.6 x 3.3 x 6.4 cm)   |   Package Dimensions: 2.3 x 3.7 x 4.2 inches (5.8 x 9.4 x 10.7 cm)

Amazon Price: $7.99 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $29.99

Warranty: 1 year parts.

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Etekcity Lasergrip 774 Non-contact Digital Laser Infrared Thermometer Temperature Gun -58 ~ 716 (-50 ~ 380 ), Yellow and Black

Model: Lasergrip 774   |    Mpn: Lasergrip 774   |    Ean: 7890496493898   |    PartNumber: Lasergrip 774   |   Asin: B00837ZGRY

NOTE1. The measuring surface is about 2cm below the infrared aiming point.2. For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17inches (36cm).Etekcity Laser grip 774 Thermometer guns have been used by major airports and security offices during the 2014 Ebola outbreak. Laser Guided Aim with precision at whatever you wish to measure, thanks to the laser beam guidance feature. Even from a far distance, the laser provides a mark to ensure accuracy every time you make a measurement. Infrared Lens The Infrared lens inside the Laser grip 774 Thermometer provides temperature readings without the need to touch or come close to anything dangerously hot or cold. You'll be able to effortlessly measure high temperatures, hazardous and inaccessible objects, and even moving targets; such as hot engine parts, cooking surfaces, swimming pools, bath water, wine coolers, hot asphalt, electric bearings, and much more. Specifications Temperature Range: -50 380 (-58 716 )Accuracy: 2% or 2 Distance Spot Ratio: 12:1Emissivity Adjustable: 0.95(fixed)Response Time and Wavelength: Package Included 1 x Etekcity Non-Contact Infrared Thermometer1 x 9-Volt Battery1 x User's Manual2 Year Warranty by Etekcity .

Features

  • BETTER ACCURACY: The Distance to Spot Ratio is 12:1, meaning the Lasergrip 774 can accurately measure targets at greater distances compared to most other IR Thermometers; For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36cm)
  • TARGET QUICKER: Measure surface temperature ranging from -58 ~ 716 / -50 ~ 380 , you can choose the unit from / ; Response time: 500Ms; A built in Laser gives you the precision to hone in on the exact space you want to measure
  • ADDED FUNCTIONS: The LCD screen is backlit, also has an Auto-Off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included)
  • VERSATILE DESIGN: Infrared Technology makes this thermometer handy to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points; Use it when you are cooking and barbequing, performing auto maintenance, doing home repairs, and a host of other tasks
  • NOTE: The thermometer can't measure the internal temperature of an object; Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct; FDA, FCC, CE approved; Class 2 laser, optical power 0.5-0.9mW; 2-Year Warranty by Etekcity
  • See more on Amazon...

Brand: Etekcity   |   Manufacturer: Etekcity Corporation

Item Dimensions: 1.4 x 3.9 x 7.3 inches (3.6 x 9.9 x 18.5 cm)   |   Package Dimensions: 1.2 x 3.9 x 7.1 inches (3.0 x 9.9 x 18.0 cm)

Amazon Price: $15.99 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $15.99

Warranty: 1-year warranty by etekcity

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Etekcity Lasergrip 1080 Non-Contact Digital Laser Infrared Thermometer Temperature Gun -58 ~1022 (-50 550 ), Yellow and Black

Model: 8550   |    Mpn: 025706347532   |    Ean: 0025706347532   |    PartNumber: 025706347532   |   Asin: B00DMI632G

1. The measuring surface is about 2cm below the infrared aiming point.
2. For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17inches (36cm). Simple Operation - Point and Click!
This Etekcity non-contact IR temperature gun is easy to operate. It turns on and begins reading the temperature with one press of the trigger. Clear text displays the measured temperature in either Celsius or Fahrenheit. A laser light aids in aiming, and can be turned on or off. In addition, the readout display features a backlight which can be turned on if needed.
12:1 High distance spot ratio!
This means you may measure the temp of a smaller area at the same distance compared to other 8:1 thermometers; thus the readings are much more accurate!
Reliable Product
This is a big seller in Amazon and many respected institution like Car Magazines, Airports, Universities purchase this product from us! You deserve it!
Specifications
Temperature Range: -58 1022 (-50 550 )
Accuracy: 2%
Distance Spot Ratio: 12:1
Emissivity Adjustable: 0.95(fixed)
Response Time and Wavelength: 500ms and (5-14)um
Repeatability: 1% or 1
Resolution: 0.1 or 0.1
Package Included
1x Etekcity Laser grip 1080 IR thermometer
1x 9V DC battery
1x User's manual
2-Year Warranty by Etekcity.

Features

  • BETTER ACCURACY: The Distance to Spot Ratio is 12:1, meaning the Lasergrip 1080 can accurately measure targets at greater distances compared to most other IR Thermometers; For best accuracy, the distance between the thermometer and object of measurement should approximately be 14.17 inches (36cm)
  • TARGET QUICKER: Measure surface temperature ranging from -58 ~ 1022 / -50 ~ 550 , you can choose the unit from / ; Response time: 500Ms; A built in Laser gives you the precision to hone in on the exact space you want to measure
  • ADDED FUNCTIONS: The LCD screen is backlit, also has an Auto-Off function to extend the battery life, and features a low battery indicator so you never accidentally run out of juice (battery included)
  • VERSATILE DESIGN: Infrared Technology makes this thermometer handy to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points; Use it when you are cooking and barbequing, performing auto maintenance, doing home repairs, and a host of other tasks
  • NOTE: The thermometer can't measure the internal temperature of an object; Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct; FDA, FCC, CE approved; Class 2 laser, optical power 0.5-0.9mW; 2-Year Warranty by Etekcity
  • See more on Amazon...

Brand: Etekcity   |   Manufacturer: Etekcity

Item Dimensions: 1.5 x 4.7 x 8.1 inches (3.8 x 11.9 x 20.6 cm)   |   Package Dimensions: 1.3 x 3.9 x 7.3 inches (3.3 x 9.9 x 18.5 cm)

Amazon Price: $18.99 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $18.99

Warranty: 2-year warranty by etekcity

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

AcuRite 06002M Wireless Temperature and Humidity Sensor

Model: 06002M   |    Mpn: 06002M   |    Ean: 0885699844322   |    PartNumber: 06002M   |   Asin: B00T0K8NXC

AcuRite's temperature and humidity sensor has a built-in thermometer and hygrometer to measure environmental conditions with precision and accuracy. The sensor features a compact size, weather resistant design and integrated mounting options. The sensor wirelessly transmits its readings at 16 second intervals over distances up to 330 feet. Stay informed of temperature and humidity conditions in the places you care about with AcuRite's temperature and humidity sensor. Works with AcuRite models: 00235, 00384M, 00388DI, 00478, 00592A3, 00592A4, 00592W2, 00592W3, 00554SBDDI, 00612, 00754, 00771, 00772, 00773, 00774, 00806, 00828BPDI, 00829, 01033, 01039M, 01052M, 01053M, 01060, 01086, 01088, 01089, 01090, 01094M, 01096M, 01097, 01098, 01099, 01163M, 01164M, 01165M, 01169M, 01171M, 01608, 13041M, 13042, 13044HD, 02001, 02001A1, 02001HDSB, 02001HDSBA1, 02003M, 02005TBDI, 02007, 02007B, 02008, 02010, 02014, 02015, 02016, 02022, 02026, 02027, 02030, 02030M, 02031, 02035W, 02036WB, 02037W, 02038W, 02039CA, 02040CASB, 02041, 02041CASB, 02048, 02050, 02051, 02059, 02072, 02074, 02075, 02077, 02081M, 02086CCDI, 02087SB, 02092M, 02098M, 03001, 06024MA1, 06042, 08575, 08580, 13020, 13022, 13035W, 13026W, 13230, 75075, 75077, 75107, 75108, 09150M. One-year limited warranty. It's more than accurate, it's AcuRite.

Features

  • Wireless, weather-resistant sensor measures temperature and humidity
  • Sensor data is transmitted every 16 seconds using 433 MHz wireless signal up to 330 foot (100 meter) range
  • Requires 2 AA alkaline or lithium batteries (Batteries not included). Temperature Accuracy - +/- 2 degrees Fahrenheit
  • Easy installation includes integrated hanger
  • The sensor is compatible with the AcuRite Access and a variety of AcuRite thermometers and weather stations
  • See more on Amazon...

Brand: AcuRite   |   Manufacturer: Chaney Instruments

Item Dimensions: 1.6 x 0.9 x 4.8 inches (4.1 x 2.3 x 12.2 cm)   |   Package Dimensions: 1.5 x 2 x 5.7 inches (3.8 x 5.1 x 14.5 cm)

Amazon Price: $12.99 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.99 | Used Price: $12.08

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Fermenter, Greenhouse Terrarium Temp. Control

Model: COMINHKPR111236   |    Mpn: ITC-308-11   |    Ean: 0705701565505   |    PartNumber: ITC-308-11   |   Asin: B01HXM5UAC

Specification:
Temperature Control Range: -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature Accuracy: 1 C (-50~70 C) / 1 F (-50~160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5x2.7x1.3inch)
Socket Dimension: 85x42x24mm (3.3x1.7x1inch)
Ambient Temperature: -30~75 C / -22~167 F
Storage Temperature: -20~60 C / -4~140 F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year

Package Included:
1x ITC-308 Temperature Controller
1x Manual

Features

  • [Convenient Design] Plug and play design, easy to use. Support C/ F display.
  • [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
  • [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
  • [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
  • [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
  • See more on Amazon...

Brand: Inkbird   |   Manufacturer: Inkbird Tech

Package Dimensions: 3.8 x 4.4 x 7.7 inches (9.7 x 11.2 x 19.6 cm)

Amazon Price: $34.99 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $34.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Etekcity Lasergrip 630 Dual Laser Digital Infrared Thermometer -58 ~1076 (-50 to 580 ) Non-contact Temperature Gun with Adjustable Emissivity & MAX/MIN/AVG Display

Model: Lasergrip 630   |    Mpn: 025706342742   |    Ean: 0025706342742   |    PartNumber: 025706342742   |   Asin: B00K5QVBCU

Hazard-Free The Lasergrip 630 gives you complete control to measure the temperature of virtually any surface with custom and refined accuracy. Measure temperatures ranging from -58 F to 1076 F from a distance without ever having to come into contact or proximity to hazardous elements. Measuring Guide With dual lasers, there s no more guessing on what the size of the surface area you re actually measuring. With a high distance to spot ratio of 16:1, you have the control over how wide of a surface you wish to measure. The two laser pointers will act as a visual guide for your measurements as the Lasergrip will calculate the average temperature of the space between the two laser points. For best accuracy, stand at a distance where the two points overlap. This device also allows you to adjust the emissivity to compensate for different surface textures. Whether scanning the heat on an aluminum tray or concrete road, the Lasergrip will deliver the same dependable accuracy to get the job done. Features & Specifications: 1.Measurement Range: -58 F ~1076 F (-50 C to 580 C ) 2.Storage Temperature: -20 C to 50 C (-4 F to 122 F) 3.Operating Temperature: 0 C to 50 C (32 F to 122 F) 4.Accuracy: 2% / 2 C 5.Adjustable Emissivity:0.1-1.0 6.Resolution: 0.1 F / C 7.Distance to Spot Ratio: 16:1 8.Selected Thermometer units: C / F 9.Response Time: 500ms 10.Battery/ Battery Life: 9V / about 12 hours Package Included: 1x Etekcity Lasergrip 630 Thermometer 1x 9V DC Battery 1x User's Manual Note: 1. This thermometer cannot test the temperature of target objects through across the glass. Besides, the steam, dust, smog will lower the accuracy of testing. 2. To make better accuracy, cover the surface to be measured with masking tape or flat black paint.

Features

  • BETTER ACCURACY+ADJUSTABLE EMISSIVITY: The Distance to Spot Ratio is 16:1, meaning the Laser grip 630 can assure greater accuracy compared with other thermometers with DSR 12:1 or 8:1; Adjustable emissivity improves measurement accuracy across different surface types, just regulate the emissivity of your 630 according to the instruction (0.1-1.0)
  • DUAL LASER+TARGET QUICKER: Dual laser pointers ensure high precision and indicate ideal measuring distance; Measure surface temperature ranging from -58 F ~1076 F / -50 C ~ 580 C, you can choose the unit from F / C; Response time: 500Ms
  • MULTIFUNCTION: Thermometer with max/min/avg temperatures function; the LCD screen is backlit, it also has an auto-off function and a low battery indicator to extend the battery life so you never accidentally run out of juice (battery included)
  • VERSATILE DESIGN: Infrared technology makes this thermometer handy to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points; Use it for cooking, car maintenance, real estate, Electrical engineering and more
  • NOTE: For best accuracy, the distance between the thermometer and object of Measurement should approximately be 14.17 inches (36cm); Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct; FDA, FCC, CE approved; Class 2 laser, optical power 0.3-0.49mW; 2-year warranty by Etekcity
  • See more on Amazon...

Brand: Etekcity   |   Manufacturer: Etekcity

Item Dimensions: 5.9 x 2.28 x 9.13 inches (15.0 x 5.8 x 23.2 cm)   |   Package Dimensions: 2.2 x 5.7 x 9.1 inches (5.6 x 14.5 x 23.1 cm)

Amazon Price: $25.99 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $25.99 | Used Price: $22.87

Warranty: 1-year warranty by etekcity

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

Etekcity Lasergrip 1025D Yellow/Gray One Size Thermometer Temperature Gun-58 F~1022 F (-50 C~550 C) with Adjustable Emissivity, Non-Contact Voltage Tester (NCV)

Model: Lasergrip 1025D   |    Mpn: 1   |    Ean: 0817915020807   |    PartNumber: 1   |   Asin: B0727WYCYF

Handy Versatility



From air vents to hot water pipes to even car engines, the Etekcity Lasergrip 1025D Infrared Thermometer has got you covered for accurate temperature measurements. The 12:1 distance to spot ratio allows you to measure extreme temperatures ranging from -50 F to 1022 F without being in harm's way.



Non-Contact Voltage Detection



Simply press the NCV mode button and point the 1025D Lasergrip Thermometer to a terminal strip, outlet, or cord. When the thermometer beeps, it indicates the presence of live voltage.



Electricians, maintenance professionals, and safety personnel can use the 1025D Lasergrip Thermometer to quickly test for energized circuits and defective grounds it s ideal for any electrical professional or to have at home.



Measure Adaptively



Improve the accuracy of your results with adjustable emissivity on the thermometer. The emissivity of a material is its efficiency in emitting thermal energy (most organic materials and painted or oxidized surfaces have an emissivity of 0.95). Non-reflective surfaces have a higher emissivity (closer to 1) than reflective surfaces (closer to 0). Other materials, such as polished metal surfaces, have a different emissivity level, which should be taken into account for accurate readings.



*Note: For best accuracy, the distance between the thermometer and object of measurement should be approximately 14.17 inches (36cm); this device should only be used on inanimate objects for surface temperature.



Specifications



Temperature Range: -58 1382 (-50 750 )



Accuracy: 100 C 2% 100 C 2 C



Distance Spot Ratio: 12:1



Emissivity Adjustable: Adjustable (0.1 to 1.0)



Response Time: 500ms



Resolution: 0.1 or 0.1



Storage Temperature: -4 122 (-20 50 )



Package Included



1x Etekcity Lasergrip 1025D thermometer



1x 9V DC battery



1x User's manual



2 Year Warranty by Etekcity

Features

  • BETTER ACCURACY & DUAL LASER: Dual laser technology makes it easier to see the area and surface being measured. 12:1 Distance to spot ratio allows you to measure temperatures ranging from -58 F to 1022 F (-50 C to 550 C) from a safe distance, which make sure the safety of your hand compared to other instant read thermometer
  • ADJUSTABLE EMISSIVITY & MULTIFUNCTION: Adjust emissivity from 0.1-1.0 to improve the accuracy of your measurements across different types of surfaces. Other key features include: F and C capable, Max Measurement Hold, Automatic Data Hold, Low Battery Indicator, and Auto-Off to save battery
  • VOLTAGE DETECTION: Before you troubleshoot or work with electrical installations, use the Lasergrip's Non-Contact Voltage (NCV) mode to safely test whether there is live AC voltage. Lines on the Lasergrip screen will indicate the voltage level-no specific readings will be displayed. Steady beeping will indicate the location of the maximum voltage
  • VERSATILE USE: Check barbecue grills and skillets to see if they are the perfect temperature to cook food, perform home auto maintenance with ease, or use for commercial heating, ventilation, and air conditioning (HVAC) installation
  • NOTE: temperature readings from this devices are inanimate objects. The measured temperature for humans or animals will not be correct, 9V battery included. FDA, FCC, CE, RoHS approved; Class 2 laser, optical power 0.3-0.49mW; 2-Year warranty provided by Etekcity
  • See more on Amazon...

Brand: Etekcity   |   Manufacturer: thermometer

Item Dimensions: 5.32 x 2 x 8.86 inches (13.5 x 5.1 x 22.5 cm)   |   Package Dimensions: 2.2 x 5.4 x 8.9 inches (5.6 x 13.7 x 22.6 cm)

First Available: 2018-01-21

Amazon Price: $24.99 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $24.99 | Used Price: $19.63

Warranty: 2 year warranty

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

Infrared Thermometer, Helect Non-Contact Digital Laser Infrared Thermometer Temperature Gun -58 F to 1022 F (-50 C to 550 C) with LCD Display

Model: H1020   |    Mpn: H1020   |    Ean: 0815000021579   |    PartNumber: H1020   |   Asin: B071NBJJ2Q

Features

  • Helect infrared thermometer can be used both daily and industrial temperature measurement, such as cooking, refrigeration, steel, glass, plastics, food and so on.( NOTE: The measured temperature for humans or animals will not be correct.)
  • C/ F switchable, automatic data hold, backlit LCD, low battery indicator, auto power off function. 9V Battery is included
  • Easily and quickly measure temperatures from a safe and hazard-free distance. NOTE: The diameter of the object under test must be bigger than the laser spot size
  • Built-in red laser for precisely aiming. Distance Spot Ratio: 12:1, great to measure a long distance target
  • Measurement range: -50 C to 550 C/ -58 F to 1022 F; Portable and anti-slip design makes it easy to get the temperature outdoors and indoors
  • See more on Amazon...

Brand: Helect   |   Manufacturer: Helect

Item Dimensions: 1.9 x 5.5 x 8.7 inches (4.8 x 14.0 x 22.1 cm)   |   Package Dimensions: 1.6 x 5.6 x 9.1 inches (4.1 x 14.2 x 23.1 cm)

Amazon Price: $12.99 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $12.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

AstroAI Digital Laser Infrared Thermometer, 550 Non-contact Temperature Gun with Range of -58 ~1022 (-50 550 ), Red

Model: IR550   |    Mpn: IR550   |    Ean: 0767452943711   |    PartNumber: IR550   |   Asin: B07B1W45TT

The AstroAI Infrared Thermometer Gun quickly reads and displays temperature results thanks to advanced technologies that also allow you to take these temperatures from a safe distance. Professionals use Infrared Thermometer guns for everything from cooking, baking, and barbecuing, to checking engine and tire temperatures in Auto Racing.

Whether you need to check the temperature of a freezer, or how hot the asphalt is on a racetrack, the AstroAI IR Thermometer will do the job! Features like Data Hold, Backlit Screen, and Integrated Laser Pointer make this device so much easier to use, even at long distances or tight work spaces.

Specifications
Temperature Range: -58 ~1022 / -50 ~550
Distance to Spot Ratio: 12:1
Accuracy: 2% or 2
Resolution: 0.1oC or 0.1oF
Repeatability: 1% of reading or 1
Response Time:

Features

  • Check out our VIDEO on the left side and take a quick tour of AstroAI infrared thermometer! ULTIMATE CONVENIENCE: It's never been easier or safer to take temperature readings in the kitchen, garage, during home repairs, commercial heating, ventilation, air conditioning(HVAC) installation and more thanks to Innovative IR Thermometer Technology
  • ENHANCED ACCURACY: The Distance to Spot Ratio is 12:1, making it easier to accurately measure temperatures from greater distances; An Integrated Laser assists with accurate aiming to better locate surface temperatures
  • INCREASED FUNCTIONALITY: Using the Thermometer Gun is simple thanks to features like Data Hold, an LCD backlit screen, Easy Fahrenheit/Celsius switch, 7 second Auto-Off, and Low Battery Indication so you never accidentally run out of juice
  • SAFETY FIRST: Measure temperatures as frigid as -58 F or has scorching as 1022 F, all at a safe distance from the temperature source
  • 3 Years Warranty from AstroAI; Note: Temperature readings from this devices are inanimate objects. The measured temperature for humans or animals will not be correct
  • See more on Amazon...

Brand: AstroAI   |   Manufacturer: AstroAI

Item Dimensions: 6.5 x 2.13 x 3.39 inches (16.5 x 5.4 x 8.6 cm)   |   Package Dimensions: 2.4 x 6.1 x 8.8 inches (6.1 x 15.5 x 22.4 cm)

Amazon Price: $18.69 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $19.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Infrared Thermometer, SURPEER IR5D Laser Thermometer Gun -58 1022 (-50 550 ) Adjustable Emissivity - Temperature Probe for Cooking/Air/Refrigerator/Freezer - Meat Thermometer Included

Model: IR5D   |    Mpn: SURPEER IR5D   |    Ean: 6924351614102   |    PartNumber: SURPEER IR5D   |   Asin: B072B9ZJTC

SURPPER
Life's in Good Hands
12 months warranty and return for a full refund within 30 days

Adjustable Emissivity
Adjustable emissivity from 0.1-1.0, guarantees the most accurate measurement.

Check Leaks and Poor Insulation
This product has so many applications from diagnosing air leaks in window and door installations to
checking your refrigerator and freezer temperatures. And a safe enough DSR (12:1) and non-contact
feature protect you from danger.

Easy to use
After installing the 9V battery, you only need to slightly press the measure button and aim the target
by using the red laser, then adjust the emissivity according to the emissivity form on user manual,
finally press" set" to get Max/Min/Avg/Diff values.

Specification of IR5D Infrared Thermometer
1. Temperature Range: -50 550 (-58 1022 )
2. Accuracy Resolution: 1.5 / 1.5%
3. Response Time: 0.5S
4. Emissivity: Adjustable (0.1-1.0)
5. Distance to Spot Ratio: 12 1
6. Reading Holding: 8s
7. Auto-off Time: 6s
8. Power Life: 9V 6F22

Notice:
1. In a vacuum environment, this distance to spot ratio is 12: 1; in general environment, this distance
can be appropriately shortened in order to get more accurate values.

2. Infrared thermometer can not test the temperature of target objects through across the glass.

3. Infrared thermometer can not measure the surface temperature of transparent objects like glass,
you can cover a black cloth on it; after 10-15minutes, you can measure the black cloth to get the surface
temperature of the transparent objects.

Package List:
1* SURPEER IR5D Infrared Thermometer
1* Meat Thermometer
1* 9V Battery
1* Multilingual User Manual
1* Customer Care Card

Features

  • [HIGH ACCURACY]: Combining the latest temperature sensor technology and advanced Fresnel lens, this instrument reads values of high accuracy up to 1.5 / 1.5% in only 0.5s thanks to adjustable emissivity. The distance to spot ratio is 12:1, which means you can measure the target at a longer distance.
  • [VERSTILE DESIGN]: With wide temperature range -50 550 (-58 1022 ), you can apply this tool in cooking, barbecuing, auto maintenance, home repair, or other tasks of household. To your surprise, it can also be treated as a cat/dog toy with a red laser dot.
  • [HIGH/LOW TEMP ALARM]: With the built-in laser, you can target quicker, the LCD backlit can be turned on/off. By slightly pressing the measure button, you can instantly get Max/Min/AvgA/Diff value; More importantly, the buzzer alarm will beep when the value reaches the high/low temp you have set.
  • [FREE MEAT THERMOMETER]: Featuring quick reading, high accuracy ( 1 / ), 10 minutes auto-off, long probe and 304 food grade stainless steel, it can measure inner temp of food with wide temp range -50 300 (-58 572 ). Together with infrared thermometer, it makes the best cooking aid for food lovers and gourmets.
  • [LONG BATTERY LIFE]: Low consumption of 15mAh promises longer battery life, which can last at least 6-12months in normal use. And 8s auto-off helps to save power, the low battery indication will remind you of juice running out. Furthermore, we provide 2 year quality assurance and return for a full refund within 30 days.
  • See more on Amazon...

Brand: SURPEER   |   Manufacturer: SURPEER

Item Dimensions: 4.1 x 1.5 x 4.3 inches (10.4 x 3.8 x 10.9 cm)   |   Package Dimensions: 1.8 x 5.3 x 8.6 inches (4.6 x 13.5 x 21.8 cm)

Amazon Price: $26.89 | as of 01/15/2019(7:14pm pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. General Tools MMD4E Moisture Meter, Pin Type, Digital LCD
  2. Etekcity Lasergrip 800 Digital Infrared Thermometer Laser Thermometer Temperature Gun Non-contact -5...
  3. General Tools MMD7NP Moisture Meter, Pinless, Digital LCD with Tricolor Bar Graph
  4. BLACK+DECKER TLD100 Thermal Leak Detector

Most Wished For

  1. General Tools MMD4E Moisture Meter, Pin Type, Digital LCD
  2. Etekcity Lasergrip 800 Digital Infrared Thermometer Laser Thermometer Temperature Gun Non-contact -5...
  3. General Tools MMD7NP Moisture Meter, Pinless, Digital LCD with Tricolor Bar Graph
  4. BLACK+DECKER TLD100 Thermal Leak Detector

Most Gifted

  1. General Tools MMD4E Moisture Meter, Pin Type, Digital LCD
  2. Etekcity Lasergrip 800 Digital Infrared Thermometer Laser Thermometer Temperature Gun Non-contact -5...
  3. General Tools MMD7NP Moisture Meter, Pinless, Digital LCD with Tricolor Bar Graph
  4. BLACK+DECKER TLD100 Thermal Leak Detector

Top Selling

  1. General Tools MMD4E Moisture Meter, Pin Type, Digital LCD
  2. Etekcity Lasergrip 800 Digital Infrared Thermometer Laser Thermometer Temperature Gun Non-contact -5...
  3. General Tools MMD7NP Moisture Meter, Pinless, Digital LCD with Tricolor Bar Graph
  4. BLACK+DECKER TLD100 Thermal Leak Detector



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Abrasive & Finishing


Cutting Tools


Fasteners


Filtration


Commercial Door Products


Hydraulics, Pneumatics & Plumbing


Industrial Hardware


Industrial Tools


Food Services


Janitorial & Sanitation


Lab Equipment


Material Handling


Occupational Health


Packaging & Shipping


Power Transmission


Dental Supplies


Medical Supplies


Raw Materials


Retail Fixtures & Equipment


Tapes, Adhesives & Sealants


Test, Measure & Inspect


Robotics, 3D Printing & Science Education


Industrial Electrical



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.