Frontpage > Office > Arts & Crafts > Candle Making Molds

Best Candle Making Molds - Buying Guide

Last Updated: 01/17/2019

Share on

Bestselling Candle Making Molds on Amazon

  1. Yaley Enterprises Candle Crafting 110281 110281 Candle Mold Sealer
  2. EC3 Air Purification Candles-3 Pack-Decrease Levels of Mold Spores and Mycotoxins, All Natural, No F...
  3. Premium Clear Plastic Wax Melt Clamshells (100)
  4. DGQ Wax Melt Molds - 50 Packs Clear Empty Plastic Wax Melt Clamshells for Wickless Wax Melt Candles
  5. Bee Wrap 4 Pack from Europe - Wax Wrap 2 Large 2 Medium - Wax Sandwich Wrap- Beeswax Wrap - Beeswrap...
  6. Candle Molds for Candle Making Plastic Pillar Candle Making Kit Ball Sphere Mold Large Cylinder Rib ...
  7. Premium Wax Melt Clamshells 50 Pack
  8. Candlewic 50216 2Pk of 3 X 6.5 Inch Round Aluminum One Piece Candle Molds
  9. Baosity Stainless Steel 250mm Long Handled Mixing Spoons for Scoop Candle Wax Melting Wax Soap Base ...
  10. Classic thin taper mold 1- height: 9.4 in, width: 0.47 in - 30 ft. of wick included as a gift - Pla...

  #1

Yaley Enterprises Candle Crafting 110281 110281 Candle Mold Sealer

Model: 110281   |    Mpn: FBA_110281   |    Ean: 0052124100821   |    PartNumber: FBA_110281   |   Asin: B000YQGFE0

Candle mold sealer is a special reUSAble putty that plugs up wick holes. after you thread the wick through the hole at the bottom of the mold, put a little sealer over the hole to prevent wax seepage while the candle cools and sets up.

Features

  • Candle Mold Sealer
  • Seals up Wick Holes in molds
  • Can be used with Metal and Plastic Molds
  • See more on Amazon...

Brand: Yaley Enterprises Candle Crafting   |   Manufacturer: Yaley Enterprises, Inc.

Item Dimensions: 4 x 1.5 x 0.25 inches (10.2 x 3.8 x 0.6 cm)   |   Package Dimensions: 0.5 x 2.5 x 5.65 inches (1.3 x 6.4 x 14.4 cm)

Amazon Price: $5.50 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $4.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #2

EC3 Air Purification Candles-3 Pack-Decrease Levels of Mold Spores and Mycotoxins, All Natural, No Fragrance, Botanical Ingredients in Soy Wax

Model: 203-113   |    Mpn: 14188072   |    Ean: 0851428003162   |    PartNumber: 14188072   |   Asin: B01K02JROW

Save 7 percent by buying three packs. Mold is a contributing factor in many health problems. As it grows it release spores in the air that float until you breathe them in causing an allergic reaction that results in your condition. The more mold that is in your environmental air the worse your condition will be. That is why you require clean environmental air for you to get well. The EC3 Air Purification Candle is a simple way to control the level of mold in your environmental air. The heat from the burning candle aerosolizes the natural botanical embedded in the soy wax. The candle has no added fragrances to avoid inflaming the chemical sensitivities common in sinusitis sufferers. These candles can reduce the mold count in a room from TNC (Too Numerous to Count) to nearly 0 in less than 3 hours. Each candle will burn for approximately 16 hours. The candles are designed to work with EC3 Mold Solution Concentrate to eliminate spores that settle on hard and soft surfaces like bedding or other furniture. Using these candles with Micro Balance EC3 Laundry Additive, Mold Solution Concentrate and Mold Spray will help to create a healthy household environment.

Features

  • Fast acting - Easy application
  • Nautral botanical embedded in soy wax
  • Designed to work with EC3 Mold Spray
  • Part of a complete system for managing a mold problem
  • 30 Day Satifaction Guarentee
  • See more on Amazon...

Brand: EC3 Air Purification Candles   |   Manufacturer: Micro Balance Health Products

Package Dimensions: 2.8 x 2.8 x 5.3 inches (7.1 x 7.1 x 13.5 cm)

Amazon Price: $37.26 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $37.26 | Used Price: $32.06

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #3

DGQ Wax Melt Molds - 50 Packs Clear Empty Plastic Wax Melt Clamshells for Wickless Wax Melt Candles

Model: meltmoldx50   |    Mpn: meltmoldx50   |    PartNumber: meltmoldx50   |   Asin: B0775RCCCP

6 Cell Clamshell holds 2.4 oz. of wax, and is the most common size in the market. Our clamshells work well with high fragrance loads and pour temps up to 150 . They snap shut and are easy to open. Maximum Label Area Size Is 2-1/2" Wide x 3-3/8" Tall.

Features

  • 6 Cell Plastic Clamshell Packaging Molds Hold 2.4 Oz capacity.
  • PET material won't interact with fragrance or dyes.These wax melt clamshells are sturdy, with a tight seal to ensure candles stay fresh.
  • Avoid Messy Blow Outs As These Wax Melt Molds Feature A Robust Cell Wall Thickness of 0.5 mm.
  • Perfect for all types of wax or soap,the wax pour temperature for these wax molds is up to 150 Degrees F.
  • Pack of 50pcs.Work perfectly with labels size 2 1/3 x 3 3/8.
  • See more on Amazon...

Brand: DGQ   |   Manufacturer: Leateck

Package Dimensions: 3.15 x 8.58 x 9.53 inches (8.0 x 21.8 x 24.2 cm)

Amazon Price: $11.60 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $39.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #4

Candle Molds for Candle Making Plastic Pillar Candle Making Kit Ball Sphere Mold Large Cylinder Rib Candle Making Molds DIY Candle Making Supplies Set of 3 PCS

 Ean: 0770332439662   |    PartNumber: ES-CDM-H02   |   Asin: B07K45Y4JJ

Product Name:ESA Supplies Candle Molds For Candle Making Plastic Pillar Candle Making Kit Ball Sphere Mold Large Cylinder Rib Candle Making Molds Set of 3 PCS

Tips For Candle Making

1. The surface can be porous due to low pouring temperature (below 140 F degrees), or because of the poor wax quality. Make sure to follow the recommended wax temperature before pouring.

2. The gloss on the surface may not be formed because of the higher pouring temperature than the recommended one. The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the fill in temperatures of over 167 F degrees as this may cause leakage of the candle mass and difficulty in pulling out the candle from the mold.

3. It is normal if a well is formed after the product is finished. Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling, there is a well that is formed in the center of the candle.

4. The candle is removed from the mold with difficulty sometimes. It happens if the wax is heated to high temperatures, when there is an increase in the grip. The higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed 167 F degrees.

Features

  • Package Include: 1 pillar candle mold + 1 cylinder rib candle mold + 1 sphere candle mold
  • Duarable PC Candle Mold: The plastic candle mold is made of high quality pc material. It can withstand frequent usage due to its resistance to high and low temperatures.
  • Recommanded Wax Pouring Temperatures: 140 F - 167 F degrees. Temperatures of over 167 F degrees may cause leakage of the candle mass and difficulty in pulling out the candle from the mold.
  • The Pillar Mold Size: 5x12cm (1.9x4.7inch). Wax Needed: 185g. The Cylinder Rib Mold Size: 5x10cm(1.9x3.9inch). Wax Needed: 160g. The Sphere Mold Size: 7.5x7.5cm(2.9x2.9inch). Wax Needed: 190g.
  • Perfect DIY Candle Making Mold: Perfect molds for DIY candle making. It's also a great gift for friends and your kids who are interested in handmade craftworks.
  • See more on Amazon...

Brand: ESA Supplies   |   Manufacturer: ESA Supplies

Item Dimensions: 1.18 x 1.97 x 3.94 inches (3.0 x 5.0 x 10.0 cm)   |   Package Dimensions: 3.31 x 6.42 x 8.03 inches (8.4 x 16.3 x 20.4 cm)

Amazon Price: $29.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $29.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #5

Premium Wax Melt Clamshells 50 Pack

Model: 4336840874   |    Mpn: CS-10750   |    Ean: 0653785858535   |    PartNumber: CS-10750   |   Asin: B06XYKQ346

Our Standard 6 pc clamshell holds 3 oz. of wax, and is the most common size in the market. Our clamshells work well with high fragrance loads and pour temps up to 170 . They snap easily shut and are easy to open.

Features

Brand: ALINCAS   |   Manufacturer: Maple Street Candle Company

Item Dimensions: 6 x 8 x 15 inches (15.2 x 20.3 x 38.1 cm)   |   Package Dimensions: 2.99 x 8.39 x 15.79 inches (7.6 x 21.3 x 40.1 cm)

Amazon Price: $15.45 | as of 01/17/2019(3:25am pst)
Availibility:
List Price: $15.49

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #6

Candlewic 50216 2Pk of 3 X 6.5 Inch Round Aluminum One Piece Candle Molds

Model: 50216   |    Mpn: 50216   |    Ean: 0622019502162   |    PartNumber: 50216   |   Asin: B018WGBD7C

Durable, one-piece, seamless candle mold with sidewall thickness of 04 inches. Produces an excellent pillar candle. No seams to trim and perfect mold release. Can be water bathed to Speed up your production or air cooled. This candle mold is your best buy if you plan to expand your production of pillar candles. Use rubber plugs to seal bottoms and the end is the top of the candle when finished.

Features

  • Used for making pillar candles
  • Durable metal construction
  • Reusable for Future projects
  • See more on Amazon...

Brand: Candlewic   |   Manufacturer: Binder Industries

Item Dimensions: 6.5 x 3 x 3 inches (16.5 x 7.6 x 7.6 cm)   |   Package Dimensions: 3 x 6.2 x 6.8 inches (7.6 x 15.7 x 17.3 cm)

Amazon Price: $16.01 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $16.02

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #7

Baosity Stainless Steel 250mm Long Handled Mixing Spoons for Scoop Candle Wax Melting Wax Soap Base Stirring Spoons

 Ean: 0780828036602   |    PartNumber: 66c8cca8a5171eb70be57ab0b59f403c   |   Asin: B07LDNSDCQ

Welcome to our store. If you love Sports and Outdoor Activities ,we will provide what you want, and give your much surprise.


Description:

- Multi-purpose stainless steel spoon with Long Handle


- Crafted from 410 stainless steel with a high-polish finish

- Extended long handle with deep designs, It is very convenient to press or take candle wax, can be used for stirring candle wax

- Perfect for Candy Making, Wax Melting, and more DIY Craft Projects

- Length: Approx. 250mm / 10inch

- Deep: Approx. 10mm / 0.39inch

- Width: Approx. 38mm / 1.5inch

- Thick: Approx. 28mm / 1.1inch

- Weight: About 40g

- Material: 304 Stainless Steel

Package Includes:

1 Piece Stainless Steel Spoon

Features

  • Multi-purpose stainless steel spoon with Long Handle
  • Crafted from 410 stainless steel with a high-polish finish
  • Extended long handle with deep designs, It is very convenient to press or take candle wax, can be used for stirring candle wax
  • Perfect for Candy Making, Wax Melting, and more DIY Craft Projects
  • Length: Approx. 250mm / 10inch
  • See more on Amazon...

Brand: Baosity   |   Manufacturer: Baosity

Amazon Price: $4.39 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 1-2 business days
List Price: $4.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #8

Classic thin taper mold 1- height: 9.4 in, width: 0.47 in - 30 ft. of wick included as a gift - Plastic candle molds for making candles

Model: 4336840872   |    Mpn: 43216-19485   |    Ean: 0646412948501   |    PartNumber: 43216-19485   |   Asin: B01KJ3VEUM

We have a wide variety of molds for the manufacturing of candles. With their help, you can easily create both traditional and original products with unique design.

We offer molds for candles of caprolon engineering. They are suitable for casting wax, paraffin, and other bases. The material is resistant to high and low temperatures, so the form does not crack or split in service. Caprolon can be in contact with paraffin additives and acidic environments without any harm. Due to the durability of caprolon, the candle molds can be used unlimited number of times.

Important to know: 1. Why is the surface porous? The pores on the surface of a candle may be formed from the low pouring temperature (below 140 F degrees), poor wax quality.

2. Why is there no gloss on the surface? The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the fill temperatures of over 167 F degrees as this may cause leakage of the candle mass and difficulty in pulling out the candle from the mold.

3. Why is the well formed? Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling there is a well that is formed in the center of the candle.

4. Why is the candle removed from the mold with difficulty? At high temperature of the wax there is an increase of the grip, the higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed the weight of candle (167 F degrees).

Features

  • BUY CONFIDENTLY - 100% money back guarantee
  • Candle molds are made of engineered plastic. The materal is resistant to high and low temperatures (from -4 to 248 F).
  • The molds are divided into two parts: the body and the lid, to make it easier to comfortably take a candle out. Candle molds are for paraffin, wax, beeswax
  • Mold size: height: 9.4 in, width: 0.47 in
  • See more on Amazon...

Brand: Candle Shop   |   Manufacturer: Candle Shop

Item Dimensions: 12.2 x 2.4 x 3 inches (31.0 x 6.1 x 7.6 cm)   |   Package Dimensions: 2.4 x 3 x 12.2 inches (6.1 x 7.6 x 31.0 cm)

Amazon Price: $19.84 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $19.84

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #9

Homankit Silicone Christmas Pine Tree Candle Molds/Soap Molds/Baking Molds, Ideal Moulds for DIY Xmas Candle Making, Soap Making and Baking

 PartNumber: candlemouldus-003   |   Asin: B07GZJ5LW9

Homankit Silicone Christmas Tree Candle Molds / Soap Moulds / Baking Moulds

Material: Food Grade Silicone
Size: 5.8*8cm
Finished Size: 7.7*4.7cm
Resisted Temperature: -40 C - 230 C
Package Includes: 1 X Christmas Tree Silicone Candle Mold

Perfect for making of handmade soap, chocolate, biscuits and food baking, candle, poly resin crafts, epoxy resin crafts, alloy ornaments and jewellery, etc.

Tips

How do you get the wick in for candle?
Put a little hole in the bottom of the Candle Mould and thread the wick through there.

How do you get the candle out of Mould?
Cut down one side of the mould 2/3. Hold mould together with elastic bands and line up edges before pouring wax.

Features

  • Homankit Silicone Candle Moulds / Soap Moulds / Baking Moulds--- Size: 5.8cm*8.0cm, Finished Size:7.7*4.7cm. Made of Food Grade Silicone.
  • Non-Stick, Reusable / Durable & Easy to Clean,and Dishwasher Safe
  • Healthy & Environmental, and FDA and LFGB Approval
  • Perfect Silicone Molds for Handmade Candle Making, Soap Making and Baking
  • BACKED by Homankit Money-Back Guarantee: All of Silicone Molds are High-quality and Tested Rigorously.100% Refund If you are NOT satisfied with these DIY companions. No Questions, No Hassle. Buy Silicone Moulds for your home with Confidence
  • See more on Amazon...

Brand: Homankit   |   Manufacturer: Homankit

Package Dimensions: 3.2 x 3.6 x 5.2 inches (8.1 x 9.1 x 13.2 cm)

Amazon Price: $9.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $9.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #10

Candle Shop - Candle Molds set (12 candle molds) - 120 ft. of wick included as a gift - Plastic candle molds for making candles

Model: CM   |    Mpn: CM   |    Ean: 0646412948648   |    PartNumber: CM   |   Asin: B06Y4QBRTV

The set includes: Cylinder: ( 1: height: 5.9 in diameter: 1.6 in, 2:height: 5.1 in, width: 1.9 in, 3: height: 5.9 in, width: 2.3 in, 4: height: 5.1 in, width: 2.7 in), Ball: ( 1 - diameter: 2.5 in, 2 - diameter: 3.1, 3 - in diameter: 3.9 in), Egg: ( 1 - height: 2 in, width: 1.6 in, 2 - height: 3.5 in, width: 2.3 in), Classic mold - height: 9.4 in, width: 0.47 in, Pyramid mold - height: 6.3 in, width: 2.7 in, ylinder Rif mold - height: 3.1 in, width: 2.7 in We offer candle molds made of caprolon. They are suitable for casting wax, paraffin, and other bases. The material is resistant to high and low temperatures, so the mold does not crack or split during use. Caprolon can be in contact with paraffin additives and acidic environments without any harm. Due to the durability of caprolon, the candle molds can be used unlimited number of times.

Important to know: 1. The pores on the candle surface may be formed from the low pouring temperature (below 140 F degrees), or just simply poor wax quality.

2. Why is there no gloss on the surface? The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the fill temperatures of over 167 F degrees as this may cause leakage of the candle mass and difficulty in pulling out the candle from the mold.

3. Why is the well formed? Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling there is a well that is formed in the center of the candle.

4. Why is the candle removed from the mold with difficulty? At high temperatures of the wax there is an increase of the grip, the higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed the weight of candle (167 F degrees).

Features

  • QUANTITY: This candle mold set includes a wide variety of candle molds to suit different needs and tastes of candle makers. The 12 DIY molds are the answer to the customers' requests
  • QUALITY: These molds are extremely durable and made of safe plastic that is the best quality for candle making. The material is resistant to high and low temperatures.
  • CONSTRUCTION: The molds are divided into two parts: the body and the lid, to make it easier to comfortably take a candle out. Candle molds are for paraffin, wax, beeswax.
  • SAFETY: These molds are made of Caprolon, a very durable material which is suitable for casting paraffin, wax, beeswax and other bases. The molds can withstand high and low temperatures without damage and/or cracking and can be reused numerous times. There is no harm from the materials used.
  • BUY CONFIDENTLY: If for some reason, within 30 days of purchase, you are not satisfied with our candle making molds, you can exchange them for different ones or get your money back, no questions asked.
  • See more on Amazon...

Brand: Candle Shop   |   Manufacturer: Candle Shop

Package Dimensions: 4.49 x 8.11 x 14.61 inches (11.4 x 20.6 x 37.1 cm)

Amazon Price: $109.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $109.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #11

DIY 3D Silicone Candle Mold Clay Craft Mold Aroma Candle Gypsum Mold (Color Random)

 Ean: 0602669811753   |    PartNumber: AN11   |   Asin: B07G49XJMJ

Parameters:
Material: silicone
Size: as shown
Heat-resistant temperature: about -50 C-300 C
Features: This reusable mold features novel design, soft texture, changeable style and is easy to release and clean.
Uses: Can be utilized to make cakes, soaps, puddings, chocolates, candles, jellies, aromatherapy stones and other crafts

Notice:
1. Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid.
2. Due to different batches, the color of the silicone mold will be different.

Packing list:

1 *Silicone mold (Color random,the candle is not included)

Features

  • Easy to release and clean.
  • Heat-resistant temperature: about -50 C-300 C .
  • Made of High quality silicone,innoxious, no peculiar smell.
  • Size:mold size:7*8cm/2.75*3.15inch(diameter*height).
  • Uses: Can be utilized to make cakes, soaps, puddings, chocolates, candles, jellies, aromatherapy stones and other crafts
  • See more on Amazon...

Brand: Younar   |   Manufacturer: aneil

Package Dimensions: 2.6 x 2.7 x 3.2 inches (6.6 x 6.9 x 8.1 cm)

Amazon Price: $7.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 1-2 business days
List Price: $7.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #12

DIY Flower Pot Silicone Mold Succulent Plants Concrete Planter Vase Molds Candle Holders Mold Color Random

 Ean: 0602669570230   |    PartNumber: unknown   |   Asin: B07FD2VPMP

Parameters: Material: silicone mold size:9*4.8cm/3.55*1.77inch(diameter*height). flower pot size:6.2*3.8cm/2.44*1.5inch(diameter*height) Heat-resistant temperature: about -50 C-300 C Features: This reusable mold features novel design, soft texture, changeable style and is easy to release and clean. Uses: Can be utilized to make cakes, soaps, puddings, chocolates, candles, jellies, fleshy flower pots, aromatherapy stones and other crafts How To Make: 1.Get the cement and mix it with water. 2.Pour the cement into the mold and wait for it to dry by placing it outside a day and a night. 3. If the cement product of the mold is solidified, remove the mold directly to demold. Packing list: 1 *Silicone mold (Color random,the flower pot is not included)

Features

  • Material: silicone
  • Easy to use and clean.
  • High durability and flexibility.
  • Size:mold size:9*4.8cm/3.55*1.77inch,flower pot size:6.2*3.8cm/2.44*1.5inch(diameter*height).
  • Uses: Can be utilized to make cakes, soaps, puddings, chocolates, candles, jellies, fleshy flower pots, aromatherapy stones and other crafts.
  • See more on Amazon...

Brand: Younar   |   Manufacturer: aneil

Amazon Price: $7.29 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 1-2 business days
List Price: $7.29

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #13

Ball Diameter: 3.1 in - Sphere - 30 ft. of Wick Included as a Gift - Plastic Candle molds for Making Candles

Model: 4336840893   |    Mpn: 43216-73869   |    Ean: 0646412948389   |    PartNumber: 43216-73869   |   Asin: B01H48WGXY

This ball shaped mold comes from a wide variety of molds for the manufacturing of candles. With their help, you can easily create both traditional and original products with unique design.

This mold and other ones that we offer are molds for candles of caprolon engineering. They are suitable for casting wax, paraffin, and other bases. The material is resistant to high and low temperatures, so the form does not crack or split in service. Caprolon can be in contact with paraffin additives and acidic environments without any harm. Due to the durability of caprolon, the candle molds can be used unlimited number of times.

Important to know: 1. Why is the surface porous? The pores on the surface of a candle may be formed from the low pouring temperature (below 140 F degrees), poor wax quality.

2. Why is there no gloss on the surface? The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the fill temperatures of over 167 F degrees as this may cause leakage of the candle mass and difficulty in pulling out the candle from the mold.

3. Why is the well formed? Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling there is a well that is formed in the center of the candle.

4. Why is the candle removed from the mold with difficulty? At high temperature of the wax there is an increase of the grip, the higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed the weight of candle (167 F degrees).

Features

  • BUY CONFIDENTLY: If for some reason, within 30 days of purchase you are not satisfied with our product, you can exchange it for a different one or get your money back, no questions asked.
  • QUALITY: The mold is made of supreme and durable plastic. The material is resistant to high and low temperatures and is made to meet all of our customers' expectations.
  • CONVENIENCE: The ball shaped candle molds are divided into two parts: the body and the lid, to make it easier to comfortably take a finished candle out. Candle molds are for paraffin, wax, beeswax, and other waxes.
  • SIZE: The size of the mold is 3.1 inches in diameter, which makes it one of the most beautiful candle molds for your household and/or business. They are described as 'cute' by our customers who love this ideal size.
  • SAFETY: We offer molds for candles of caprolon engineering, which is very durable and the candle molds can be reused multiple times and can withstand high and low temperatures without damage and/or cracking.
  • See more on Amazon...

Brand: Candle Shop   |   Manufacturer: Candle Shop

Package Dimensions: 4.3 x 4.4 x 4.4 inches (10.9 x 11.2 x 11.2 cm)

Amazon Price: $19.96 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $19.96

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #14

Candlewic 2Pk of 2 X 6.5 Inch Round Aluminum One Piece Candle Molds

Model: 50214   |    Mpn: 50214   |    Ean: 0622019502148   |    PartNumber: 50214   |   Asin: B018WGBBA6

Durable, one-piece, seamless candle mold with sidewall thickness of 04 inches. Produces an excellent pillar candle. No seams to trim and perfect mold release. Can be water bathed to Speed up your production or air cooled. This candle mold is your best buy if you plan to expand your production of pillar candles. Use rubber plugs to seal bottoms and the end is the top of the candle when finished.

Features

  • Used for making pillar candles
  • Durable metal construction
  • Reusable for Future projects
  • See more on Amazon...

Brand: Candlewic   |   Manufacturer: Binder Industries

Item Dimensions: 6.5 x 2 x 2 inches (16.5 x 5.1 x 5.1 cm)   |   Package Dimensions: 2.14 x 4.14 x 6.58 inches (5.4 x 10.5 x 16.7 cm)

Amazon Price: $9.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $15.55

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #15

Lychee Transparent Square Shape Candle Model Heat Resistant Candle Container DIY Candle Making Accessories

 Ean: 0710378173335   |    PartNumber: 0G03TLGYH3813VIZMQ   |   Asin: B078H72XTL

Material: Plastic. Size: Approx. 6 x 6 x 7.5cm/2.4 x 2.4 x 3". Package Includes: 1 Piece Candle Mold

Features

  • Polycarbonate plastic is heat resistant allowing for the safe burning of your candles.
  • Clear plastic allows for eye-catching, decorative colored candles.
  • Sturdy in structure ensures it maintains shape while pouring hot wax.
  • Easy to use and clean.Can be used for wax, resin, clay, chocolate, jelly, sugar, cake and more.
  • It is a useful mould and tool for handmade soap and DIY candle making.
  • See more on Amazon...

Brand: lychee   |   Manufacturer: Lychee

Item Dimensions: 2.95 x 2.36 x 2.36 inches (7.5 x 6.0 x 6.0 cm)   |   

Amazon Price: $8.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 1-2 business days
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #16

2 Pack Bee Candle Molds - Buytra Silicone Bee Mold for Homemade Candle, Mini Soap, Lotion Bar, Fondant, Chocolate, Candy, Cake Decorating, Polymer Fimo Clay Etc

 Ean: 0651743025005   |    PartNumber: Buytra- Bee Mold 01   |   Asin: B07GF3R9LB

Buytra Bee Candle Mold Soap Mold, Silicone Wax Molds for Handmade Soap, Lotion Bar, Fondant, Chocolate, Candy etc

Specification

Material- food grade silicone, non toxic and odorless, safe to use

Temperature range- -40-230 degrees centigrade

Measurement- 1.97 (H) * 2.28"(OD), finished product size approx 1.69" tall, 1.3 oz (36 grams)

Pattern- cute bee design

Microwave oven, dishwasher safe, easy to clean

Color- Pink

Weight- approx 95g

So many uses for this mold : idea for handmade candle making, soap making, candy, chocolate, jelly, ice cube, baking, sugar craft cake decorating or other diy crafts. Make a great Gift for your kids or friends in the their anniversary, birthday!


How to make a candle with this mold



Recommended type of candle wax for the mold

Paraffin recommended, but if you want to use soy wax to make candles, please make sure that let the candle set for a few days because soy wax is softer, and be very careful getting it out.

1. Run the wick through the bottom of the mold using a large eye carpet needle
2. Secure and center the wick to the pouring area (top of the mold)
3. Casting temperature of the wax should not exceed 170 degrees F
4. Let cool and top off as wax shrinks
5.Cut Mold down two opposite sides until candle can be removed freely. The mold should not be cut all the way to the bottom.
6. Candle measures approx 2 inches tall, a little small
7. Use rubber bands that are snug but not tight, the rubber bands should only be snug enough to hold the mold together without deforming the interior of the mold.
8. Clean the molds with soap and water between uses, otherwise dirt and old wax will build up and affect detail.



Features

  • SAFE AND DURABLE TO USE- the bee mold is food grade silicone made, temperature range from -40 to 200 degrees celsius, oven safe as well as microwave and freezer
  • MEASUREMENT- the pink candle mold measures approx 1.97 inches tall, 2.28 inch OD, 1.50 ID ; the size of the bee when made into a candle or a soap is approx 1.8 inches tall, 1.3 ounces
  • EASY TO RELEASE- The flexible silicone candle making mold is pretty easy to remove. After it drys completely you just simply push from the bottom and then pull out the candle, very easy to use
  • MULTIPURPOSE- The 3d bee candle making mold is very versatile, in addition to be a candle or soap mold, it also can be used as cake, chocolate, candy, baking, ice cube, resin mold or used for ther diy craft projects
  • HOW TO INSERT WICK INTO THE WAX MOLD- you can make a hole with a large needle to put the waxed wick through the bottom of the mold
  • See more on Amazon...

Brand: Buytra   |   Manufacturer: Buytra

Package Dimensions: 2.44 x 5.35 x 5.79 inches (6.2 x 13.6 x 14.7 cm)

Amazon Price: $11.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #17

DGQ Wax Melt Molds Heart Shape - Clear Wax Molds Plastic Wax Melt Clamshells (50-Packs)

 PartNumber: WMH-MOLD   |   Asin: B07JW7BVMD

DGQ Wax Melt Molds Heart Shape - Clear Wax Molds Plastic Wax Melt Clamshells

Features

  • 16 Cell Plastic Round Clamshell Packaging Molds Hold 5 Oz capacity.
  • PET material won't interact with fragrance or dyes.These wax melt clamshells are sturdy, with a tight seal to ensure candles stay fresh.
  • Avoid Messy Blow Outs As These Wax Melt Molds Feature A Robust Cell Wall Thickness of 0.5 mm.
  • Perfect for all types of wax or soap,the wax pour temperature for these wax molds is up to 150 Degrees F.
  • Pack of 12pcs.Work perfectly with labels size 5-3/4 x 5-3/4.
  • See more on Amazon...

Brand: DGQ   |   Manufacturer: Leateck

Package Dimensions: 6.4 x 11.2 x 13.4 inches (16.3 x 28.4 x 34.0 cm)

Amazon Price: $32.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $69.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #18

X-Haibei Numbers Candle Candy Silicone Mold for Birthday Cake Ice Cream Decoration

Model: SM0476   |    Mpn: SM0476   |    Ean: 0700064588192   |    PartNumber: SM0476   |   Asin: B00JL4P8VC

This mold can make number candle or candy to decorate your birthday cake or ice cream. From 0 to 9,you can use them to combine any colorful numbers to express your significant commemoration day or age. Children can learn their number with these great educational number candy or candle. Not only can they learn the number, but they can also learn colours as the candy or candle are in different colours . About Silicone:Heat-resistant temperature of -40 Degrees Celsius to +230 Degrees Celsius, can be re-used, innovative design, soft, varied styles, stripping easy, and easy to clean.

Advantages:Silicone is extremely stable properties, UV, ozone, extreme temperatures, and the vast majority of chemical agents can not change its character. it can be applied to microwave heating, oven baked, non-direct contact with flame cooking, cold storage and freezing. In addition, the silicone material by the U.S. Food and Drug Administration (FDA) food safety testing, direct contact with food without any problems.

Features

  • Quantity: 1
  • Material: U.S.food-grade silicone (FDA standard)
  • Net,weight(gram): 142
  • each cavity dimension appro.2.8x1.6x0.4 (inches)
  • Color: ITEM COLR RANDOMLY SENT(possibly not the same color as pictures),if you dont accept that,please contact us before you bid it.Thank you.
  • See more on Amazon...

Brand: X-Haibei   |   Manufacturer: X-Haibei

Package Dimensions: 1 x 9.6 x 11.4 inches (2.5 x 24.4 x 29.0 cm)

Amazon Price: $8.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $8.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #19

ylinder Rif Mold - Height: 3.1 in, Width: 2.7 in - 30 ft. of Wick Included as a Gift - Plastic Candle molds for Making Candles

 Ean: 0646412948488   |    PartNumber: 43216-114131   |   Asin: B01KJ3O738

We have a wide variety of molds for the manufacturing of candles. With their help, you can easily create both traditional and original products with unique design.

We offer molds for candles of caprolon engineering. They are suitable for casting wax, paraffin, and other bases. The material is resistant to high and low temperatures, so the form does not crack or split in service. Caprolon can be in contact with paraffin additives and acidic environments without any harm. Due to the durability of caprolon, the candle molds can be used unlimited number of times.

Important to know: 1. Why is the surface porous? The pores on the surface of a candle may be formed from the low pouring temperature (below 140 F degrees), poor wax quality.

2. Why is there no gloss on the surface? The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the fill temperatures of over 167 F degrees as this may cause leakage of the candle mass and difficulty in pulling out the candle from the mold.

3. Why is the well formed? Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling there is a well that is formed in the center of the candle.

4. Why is the candle removed from the mold with difficulty? At high temperature of the wax there is an increase of the grip, the higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed the weight of candle (167 F degrees).

Features

  • QUALITY: Candle molds are made of a long-lasting and specifically engineered plastic. The material is resistant to high and low temperatures. The cylinder molds are extremely durable and will last a lifetime.
  • SHAPING: The molds are divided into two parts: the body and the lid, to make it easier to comfortably take out a candle. Candle molds are for paraffin, wax, beeswax.
  • SAFETY: We offer molds for candles of caprolon engineering, which is very durable and the molds can be reused multiple times and can withstand high and low temperatures without damage or cracking.
  • CONSTRUCTION: Mold size: height: 3.1 inches, width: 2.7 inches. As described above, this candle mold is very durable. Make sure to follow the melting temperature and building instructions closely to avoid leakage.
  • BUY CONFIDENTLY: If for some reason, within 30 days of purchase you are not satisfied with our cylinder Rif mold, you can exchange it for a different one or get your money back, no questions asked.
  • See more on Amazon...

Brand: Candle Shop   |   Manufacturer: Candle Shop

Package Dimensions: 4.2 x 4.4 x 4.5 inches (10.7 x 11.2 x 11.4 cm)

Amazon Price: $19.96 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $19.96

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #20

Mann Lake "Patch Pumpkin" Candle Mold

Model: PM801   |    Mpn: PM801   |    Ean: 0714854738018   |    PartNumber: PM801   |   Asin: B00NAQABDC

This patch pumpkin mold makes for a great addition to your fall/Halloween decor! If you are new to candle making or a professional you'll find the Candle Flex Molds to be easy to use. Our durable, flexible molds will last for hundreds of pouring's, giving you beautiful candles and ornaments time after time. This is only the mold to make the candle. Candle not included. Color of mold material may vary.

Features

  • Extremely easy to use
  • Flexible material makes pulling candle from mold easier
  • Hundreds of pours from one mold
  • Check out the many different Candle Flex molds available
  • Use mold release for the best release of candle
  • See more on Amazon...

Brand: Mann Lake   |   Manufacturer: Mann Lake Ltd

Item Dimensions: 2.75 x 6 x 6 inches (7.0 x 15.2 x 15.2 cm)   |   Package Dimensions: 3.9 x 7 x 7.8 inches (9.9 x 17.8 x 19.8 cm)

Amazon Price: $48.96 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $49.59

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #21

Mann Lake "Carved Egg" Candle Mold

Model: PM285   |    Mpn: PM285   |    Ean: 0714854732856   |    PartNumber: PM285   |   Asin: B00NAQA4VG

If you are new to candle making or a professional you'll find the Candle Flex Molds to be easy to use. Our durable, flexible molds will last for hundreds of pouring's, giving you beautiful candles and ornaments time after time. This is only the mold to make the candle. Candle not included. Color of mold material may vary.

Features

  • Extremely easy to use
  • Flexible material makes pulling candle from mold easier
  • Hundreds of pours from one mold
  • Check out the many different Candle Flex molds available
  • Use mold release for the best release of candle
  • See more on Amazon...

Brand: Mann Lake   |   Manufacturer: Mann Lake Ltd

Item Dimensions: 4.5 x 4 x 4 inches (11.4 x 10.2 x 10.2 cm)   |   Package Dimensions: 4.6 x 6.4 x 7.5 inches (11.7 x 16.3 x 19.1 cm)

Amazon Price: $26.25 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 1 to 2 days
List Price: $26.25

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #22

Astra Gourmet DIY Metal Bath Bomb Mold - 5 Size 10pcs for Your Own Bath Bomb Making, Handmade Soaps and Craft

 PartNumber: DHCV-0D8JBKB   |   Asin: B07J9YMR6D

Astra Gourmet bath bomb mold is popular gifts for your partners, with 5 Sizes 10 Pieces for bath bomb, better combination. It's a nice variety and perfect for making small to large sized bath bombs.
Specifications
Molds Net Weight: 85g/3 oz
Molds Material: Aluminum alloy
Color: Silver
Internal Diameter:
1.77"/2.16"/2.55"/3.14"/3.54"
How to use the Bath Bomb Mold:
-Step1:Pack mixture into mold;
-Step2:Press the two sides together and clean around the mold;
-Step3:Remove the mold carefully;
-Step4:Simply get a perfect bath bomb
-Tip:Let bath bomb dry for a night before shrinking
Ingredients of making bath bomb
1/2 cup citric acid
1/2 cup epsom salts
1 cup baking soda
1 tsp. water
2 tsp. essential oil or fragrance oil (avoid minty oils)
3 tsp. olive oil or similar vegetable oil
a few drops food coloring (any color)

Features

  • Spotbrace bath bomb molds includes 5 sets molds: Internal Diameter:1.77"/2.16"/2.55"/3.14"/3.54"
  • Made of aluminum metal, non oxidizing food grade, durable and sturdy. High quality aluminum metal bath bomb mold is strong enough to used for a long time. Practical, convenient and easy to clean.
  • MULTIPLE USAGES - For making soaps, chocolat, pudding, ice pops,etc.
  • Idea Gift:the bath bomb mold set itself will be a cool gift idea; or you can make the unique bath bombs as a gift, you can let your imagination and creativity go wild. Really an ingenious gift for friends, sweethearts & family members.
  • Not only convenient to store bath bombs, the bomb molds also can be used for various craft and food such as hand made soaps, diy candles, cake, egg tart ect..
  • See more on Amazon...

Brand: Astra Gourmet   |   Manufacturer: Astra Gourmet

Package Dimensions: 1.7 x 3.3 x 3.5 inches (4.3 x 8.4 x 8.9 cm)

Amazon Price: $9.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $22.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #23

Pack of 2 Molds: Flowers Silicone Molds for Baking, Crafts, Soap & Candle Making

 Ean: 0616576982567   |    PartNumber: 43457-17032   |   Asin: B07KFQKZDW

Pack of two Flowers Silicone Molds for Baking or Crafts: Cupcakes, Desserts, Jello, Soap, Candle Making. Oven, Microwave and Freezer Safe. 100% Food Grade Silicone. Each mold has 6 cavities. (Six Flowers in each mold). Size of each mold: 11 x 6.7 x 1.5 inch. Each Flower holds 4 ounces (4 oz). Dishwasher, oven and freezer safe. Easy to clean and storage: The flexibility of silicone allows the pan to be folded without damage, it simply unfolds back to its initial shape. QUALITY: 100% Food grade silicone BPA Free FDA approved.

Features

  • Pack of 2 Flowers Silicone molds. Size of each mold: 11 x 6.7 x 1.5 inch. Each Flower holds 4 ounces (4 oz).. 6 Flowers in each mold. Total Flowers: 12.
  • Results: You will experience the easiest way to un-mold, with PERFECT RELEASE QUALITY: 100% Food grade silicone BPA Free FDA approved.
  • Use it for baking: Oven or microwave safe. Two tiers cakes easily released. Bakes evenly, without burnt edges or bottom and stops baking when removed from the oven, preventing overcooking.
  • Use it for your crafts: You will have perfect intricate shapes for crafts, like SOAPS, CANDLES, clay, etc.
  • Make beautiful desserts or candy: Refrigerated ( JELLO and other cold DESSERTS), frozen (ice cream)
  • See more on Amazon...

Brand: Tangerine High   |   Manufacturer: Tangerine High

Package Dimensions: 1.5 x 6.5 x 11 inches (3.8 x 16.5 x 27.9 cm)

Amazon Price: $6.00 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $6.00

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #24

Keliay Bargain Women Boho Plus Size Loose Linen National Hippie Swing Long Tops Shirt Blouse

Asin: B07M9MD62X

Welcome to Keliay mall. Keliay mall focus on selling Women's clothes, handbags,

Delivery Date for Reference: The item will be shipped from China and will be delivered in 10 - 20 days

Please select the size according to the size chart in the picture not amazon size chart before placing an order. (If you have no idea about the size chart please purchase it in one size larger than your usual size because the chinese size is smaller than US and EU)

Any problem, Please feel free to contact us, We promise to you that we will try our best to serve you, We have complete replacement and return policy



Size:S ---US:4 --- Bust:92cm/36.22"--- Shoulder:39cm/15.35" ---Length:60cm/23.62" ---Sleeve :56cm/22.04"

Size:M--- US:6 --- Bust:96cm/37.8'' Shoulder:40cm/15.74" ---Length:61cm/24.01" ---Sleeve :57cm/22.44"

Size:L--- US:8 --- Bust:100cm/39.37" Shoulder:41cm/16.14" ---Length:62cm/24.40" ---Sleeve :58cm/22.83"

Size:XL--- US:10 --- Bust:104cm/40.94" Shoulder:42cm/16.53" ---Length:63cm/24.80" ---Sleeve :58cm/22.83"

Size:XXL ---US:12 ---Bust:108cm/42.51" Shoulder:43cm/25.19" ---Length:64cm/25.19" ---Sleeve :58cm/22.83"

Features

  • Features: Casual Style,Floral Prnted design,Pullover,O-Neck,Flowy Tops,Loose Shirts,Soft and Comfy,Elastic and Breathable.
  • Style:basic t-shirt, plain tshirt, short sleeve tshirt, casual t-shirt, loose top. A variety of colors for your choice. Suitable for maternity ,Father's Day Summer Wedding Office Hours Weekend Picnic Outdoor Workout etc.
  • Material: 95% Cotton, 5% Spandex;Lightweight,soft and breathable. MEASUREMNET: S(US 4-6),M(US 8-10),L(US 12-14),XL(US 16-18); Please use the Size Chart Image on the left.If you are not sure about size, feel free to contact us.
  • It is a classic design and suit for someoccasions,party,church,disco,beach,holiday,vacation,camping or for work.can match with leggings,denim shorts,capris,hot pants or jeans,Drape hem is leisure style and hide the belly and makes you look more flattering and slimming
  • ruffle mesh dress red trendy winter casual sparkly coat sweatshirt pink new years eve petite junior sheer blue fashion green sleeveless yellow fancy ninja turtle floral asymmetrical 3x chiffon ribbed running glitter sparkle teens loose v neck lucky brand corset koi formal pajama peasant embroidered leggings army sweater patty striped guess fleece cross alien sequence high waist gold woman strapless swimsuit bathing suit anatomy wrap crochet set one cuddle duds rave bustier sequined swim
  • See more on Amazon...

Brand: Keliay   |   Manufacturer: Keliay

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #25

Fewo 2 Pack 3D Bee Honeycomb Candle Molds Beehive Silicone Mold for Homemade Beeswax Candle Soap Hand Lotion Bars Crayon Wax Melt Hives Candle Making Supplies

 Ean: 7801231998844   |   Asin: B07L3DR3B1

Features

  • Made from food-grade platinum silicone material which is FDA approved and BPA free. Can directly contact with food without any problems.
  • Mold Size: As is shown in the pictures.
  • Microwave, Oven, Refrigerator, Freezer and Dishwasher Safe. Temperature Safe from -40 to +446 degrees Fahrenheit (-40 to +230 degrees Celsius).
  • Great for creating you special own special chocolates, candies, candles, soaps, lotion bars, crayons, waxes, polymer clay, plaster of Paris and more with this mold.
  • 100% MONEY BACK GUARANTEE! We guarantee a full refund if you are unsatisfied with our products for any reason.
  • See more on Amazon...

Brand: Fewo

Package Dimensions: 2.72 x 6.42 x 8.03 inches (6.9 x 16.3 x 20.4 cm)

Amazon Price: $14.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $14.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #26

Silicone Soap Molds for Soap Making, 3D Silicone Candle Mold for Candle Maker

Model: Buddha   |    Mpn: Buddha   |    Ean: 0781871237442   |    PartNumber: Buddha   |   Asin: B07JZYLFCM

Great Mold Silicone Soap Molds for Soap Making, 3D Silicone Candle Mold for Candle Maker,unleash your creativity,you deserve it!

Thanks for your interest of our Great Mold products for the first.Kindly advising: Before you buy products, please kindly check the size carefully ,may be It Is not as large as your image,Thanks!

Details of Silicone Candle Molds
Finished Candle Size: 2.1*1.4*1.4inch
Finished Candle Weight:1.1 ounce
Silicone Molds Weight:2.5 ounce
Temperature Resistance:from -40 to +230 degrees Celsius
Color:Pink
Application:Soap Mold, Candle Mold, Wax Mold, Aromatherapy Gypsum Mold,Cake Mold, Decorating Craft Mold.

Why Choose us you must know
1.Silicone Candle Molds with smell is made of tin cure silicone,which is industry grade not food grade,it is toxic and harm to human body.
All molds from Great Mold are made of food grade silicone,in terms of safety,we are your first and best choice.

2.Silicone Candle Molds sticky,oily, poor tear strength,will be broken after you use several times because the bad quality silicone material used,
we guarantee our silicone material quality is the best in China so far,after you received the mold you will know it.

3.Except material,the skilled craftsman is another important factor which determine the good quality of the silicone molds,silicone candle molds made by poor skill workers will be thin thickness,improper hardness,
incomplete details,surface uneven or deformed,which will bring you much trouble when you make the soap or candle,such as hard to demould,soap surface with flaw,even ruin your creation,
but Our artistic department and production line technicians have more than a decade of experience in silicone molds,we can promise the design comes out just beautifully with all of it's intricate detail intact .

Features

  • This silicone Candle mold is made of 100% high quality food grade silicone rubber,no smell,safe,eco-friendly,natural antibackerial.
  • This Silicone Candle mold is Perfect thickness,Extremely flexible,Non-stick,so it pours easily and soap comes out very easily with intricate detail.
  • This Silicone Candle mold Durable in Use,you can have years of reproductions from it.
  • This Silicone Candle mold is Newest Design,it doomed to be gorgeous present,ofcause you can use it to create dozens of fun ideas,like handmade candle,soap,resin crafts etc.
  • Finished soap size:2.1*1.4*1.4inch Soap Weight:1.1 ounce, this is a cute mold but pls pay attention to the demensions.
  • See more on Amazon...

Brand: Great Molds   |   Manufacturer: Great Molds

Package Dimensions: 2.36 x 2.36 x 3.94 inches (6.0 x 6.0 x 10.0 cm)

Amazon Price: $8.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $11.96

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #27

Prettyia DIY Candle Making Supplies Stainless Steel Long Handled Mixing Spoon Melted Candle Wax Stirring Tools 1cm Deep Well 25cm Long

 Ean: 0724833144594   |    PartNumber: 12220f18214da8b48787485910907632   |   Asin: B07LB2KHG3

Description:

- Multi-purpose stainless steel spoon with Long Handle


- Crafted from 410 stainless steel with a high-polish finish

- Extended long handle with deep designs, It is very convenient to press or take candle wax, can be used for stirring candle wax

- Perfect for Candy Making, Wax Melting, and more DIY Craft Projects

- Length: Approx. 250mm / 10inch

- Deep: Approx. 10mm / 0.39inch

- Width: Approx. 38mm / 1.5inch

- Thick: Approx. 28mm / 1.1inch

- Weight: About 40g

- Material: 304 Stainless Steel

Package Includes:

1 Piece Stainless Steel Spoon


We greatly appreciate you for choosing our shop. Please check the details of our products in the description carefully before your purchase. Thanks!

Features

  • * Perfect for Candy Making, Wax Melting, and more DIY Craft Projects
  • * Multi-purpose stainless steel spoon with Long Handle
  • * Length: Approx. 250mm / 10inch
  • * Extended long handle with deep designs, It is very convenient to press or take candle wax, can be used for stirring candle wax
  • * Crafted from 410 stainless steel with a high-polish finish
  • See more on Amazon...

Brand: Prettyia   |   Manufacturer: Prettyia

Amazon Price: $4.39 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 1-2 business days
List Price: $4.39

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon



  #28

Chris.W Household Taper Candle Mold, Clear Plastic Candle Mold Supplies for Wedding Dinner Candles Making - 5.9 Inches

 PartNumber: DBW-11DBHW   |   Asin: B07KVR2ZB3

Description:

- Good quality and easy to use and clean

- Plastic is heat resistant allowing for the safe burning of your candles

- Clear plastic allows for eye-catching, decorative colored candles

- It is a useful mould and tool for handmade soap and candle making

- Material: Plastic

Size:

Base diameter 3.7cm x height 3.4cm, Candle diameter 2.2cm x length 15cm

Package Includes:

1 Piece Candle Mold

Please Understand

Due to manual measurement, it allows 1-2(mm) discrepancy.

Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc., the color tone of the website's photo and the actual item could be slightly different.

Features

  • DURABLE MOLD: Plastic candle mold is made of extremely durable plastic which will last a lifetime and can withstand frequent usage due to its resistance to high and low temperatures.
  • TAPER SHAPED MOLD: finished candle size: 2.2cm x 15cm. Make your own candle for any occasions - from decorating your dinner table to a wedding.
  • Resistant heat material, each taper candle mold can hold 50g wax approximate
  • High transparent, excellent in allowing the colors of your dyed wax to be seen.
  • This mold can be used for paraffin, wax, beeswax candle making.
  • See more on Amazon...

Brand: Chris.W   |   Manufacturer: Chris.W

Package Dimensions: 2 x 2.5 x 6.8 inches (5.1 x 6.4 x 17.3 cm)

Amazon Price: $11.99 | as of 01/17/2019(3:25am pst)
Availibility: Usually ships in 24 hours
List Price: $11.99

See Amazon Reviews | Add to your Amazon Wishlist

See On Amazon




Looking For Something Else? Search

Most Popular
New Releases

  1. Candle Molds for Candle Making Plastic Pillar Candle Making Kit Ball Sphere Mold Large Cylinder Rib ...
  2. Baosity Stainless Steel 250mm Long Handled Mixing Spoons for Scoop Candle Wax Melting Wax Soap Base ...
  3. Pack of 2 Molds: Flowers Silicone Molds for Baking, Crafts, Soap & Candle Making
  4. Keliay Bargain Women Boho Plus Size Loose Linen National Hippie Swing Long Tops Shirt Blouse
  5. Fewo 2 Pack 3D Bee Honeycomb Candle Molds Beehive Silicone Mold for Homemade Beeswax Candle Soap Han...
  6. Silicone Soap Molds for Soap Making, 3D Silicone Candle Mold for Candle Maker
  7. Prettyia DIY Candle Making Supplies Stainless Steel Long Handled Mixing Spoon Melted Candle Wax Stir...
  8. Chris.W Household Taper Candle Mold, Clear Plastic Candle Mold Supplies for Wedding Dinner Candles M...

Most Wished For

  1. Homankit Silicone Christmas Pine Tree Candle Molds/Soap Molds/Baking Molds, Ideal Moulds for DIY Xma...
  2. Candle Molds for Candle Making Plastic Pillar Candle Making Kit Ball Sphere Mold Large Cylinder Rib ...
  3. Candle Shop - Candle Molds set (12 candle molds) - 120 ft. of wick included as a gift - Plastic cand...
  4. DIY 3D Silicone Candle Mold Clay Craft Mold Aroma Candle Gypsum Mold (Color Random)
  5. DIY Flower Pot Silicone Mold Succulent Plants Concrete Planter Vase Molds Candle Holders Mold Color ...
  6. Ball Diameter: 3.1 in - Sphere - 30 ft. of Wick Included as a Gift - Plastic Candle molds for Making...
  7. Candlewic 2Pk of 2 X 6.5 Inch Round Aluminum One Piece Candle Molds

Most Gifted

  1. Lychee Transparent Square Shape Candle Model Heat Resistant Candle Container DIY Candle Making Acces...
  2. 2 Pack Bee Candle Molds - Buytra Silicone Bee Mold for Homemade Candle, Mini Soap, Lotion Bar, Fonda...
  3. DGQ Wax Melt Molds Heart Shape - Clear Wax Molds Plastic Wax Melt Clamshells (50-Packs)
  4. EC3 Air Purification Candles-3 Pack-Decrease Levels of Mold Spores and Mycotoxins, All Natural, No F...
  5. X-Haibei Numbers Candle Candy Silicone Mold for Birthday Cake Ice Cream Decoration
  6. Сylinder Rif Mold - Height: 3.1 in, Width: 2.7 in - 30 ft. of Wick Included as a Gift - Plastic Cand...
  7. Mann Lake "Patch Pumpkin" Candle Mold
  8. Candlewic 50216 2Pk of 3 X 6.5 Inch Round Aluminum One Piece Candle Molds
  9. Mann Lake "Carved Egg" Candle Mold
  10. Astra Gourmet DIY Metal Bath Bomb Mold - 5 Size 10pcs for Your Own Bath Bomb Making, Handmade Soaps ...

Top Selling

  1. Yaley Enterprises Candle Crafting 110281 110281 Candle Mold Sealer
  2. EC3 Air Purification Candles-3 Pack-Decrease Levels of Mold Spores and Mycotoxins, All Natural, No F...
  3. DGQ Wax Melt Molds - 50 Packs Clear Empty Plastic Wax Melt Clamshells for Wickless Wax Melt Candles
  4. Candle Molds for Candle Making Plastic Pillar Candle Making Kit Ball Sphere Mold Large Cylinder Rib ...
  5. Premium Wax Melt Clamshells 50 Pack
  6. Candlewic 50216 2Pk of 3 X 6.5 Inch Round Aluminum One Piece Candle Molds
  7. Baosity Stainless Steel 250mm Long Handled Mixing Spoons for Scoop Candle Wax Melting Wax Soap Base ...
  8. Classic thin taper mold №1- height: 9.4 in, width: 0.47 in - 30 ft. of wick included as a gift - Pla...



Main Categories

Home & Garden


Home Improvement


Electronics


Office


Car & Automotive


Sporting Goods


Toys and Hobby


Health & Personal Care


Beauty Supplies


Fashion


Industrial


Related Categories

Paper & Stationery


Writing & Correction Supplies


Labels, Indexing & Stamps


Tape, Adhesives & Fasteners


Filing


Envelopes And Mailing


Desk Supplies


Office Organization


Business Supplies


School Supplies


Office Electronics


Office Furniture & Lighting


Arts & Crafts



We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Certain content that appears on GistGear.com comes from Amazon services llc. This content is provided 'as is' and is subject to change or removal at any time.
Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Amazon product prices and availability are accurate as of the date/time indicated and are subject to change.