Leecraft DL-1U Zero Clearance Table Saw Insert for Delta Table Saw (Colors may Vary)
Asin: B0000223VB | Model: DL-1U | PartNumber: DL-1U | Ean: 0670218951021, 5915903643221, 0767615491417, 0733353981237 | UPC: 733353981237, 767615491417, 670218951021
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Includes Leveling Screws, Side And End Adjustment Screws; Rear Safety Pin; Precut Blade Bottom Pocket For Fully Retracted Blades And Bevel Cuts.
Elimantes Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Measures: 13-3/8" X 3-3/4" X 1/2" (Please Measure Before Ordering).
Features
- Fits: Delta: Unisaw & LEFT-TILT UNISAW, 10" Contractor,10" Tilt Arbor Saw, "Hybrid" & Left-Tilt Contractor, Grizzly G1023, Jet CTAS-10, Powermatic 63, Sears Craftsman 22104, 22114, 22124, Bridgewood BW10TS, Steel City 35605, 35610, 35670, 35675, 35680, 35685
- Measures: 13-3/8 x 3-3/4 x 1/2 (Please measure before ordering)
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Includes leveling screws, side and end adjustment screws; rear safety pin; precut blade bottom pocket for fully retracted blades and bevel cuts
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 3.00 x 8.00 x 3.00 inches
See On Amazon Similar To Leecraft DL1U Zero Clearance Table
#1
DELTA compatible Zero Clearance Insert Fits UNISAW Models 36-L336, 36-L352, 36-L552 (Combo Pack)
Asin: B09RQKTC1G | Model: NDU-36-2-LC-A | PartNumber: NDU-36-2-LC-A | Ean: 0761596797988 | UPC: 761596797988
Laminated.
Improves Dust Control.
Cleaner Cuts.
Dado Combo Available.
Brand: ZEROSERT | Manufacturer: Robert Lee Handcrafts
Dimensions: 0.50 x 14.50 x 5.00 inches
See On Amazon #2
Leecraft DL-2 Zero Clearance Table Saw Insert (For Delta Model 10 Bench Saw), Colors May Vary
Asin: B0000223V8 | Model: DL-2 | PartNumber: DL-2 | Ean: 0670218951038 | UPC: 670218951038
Reduces Sawdust Expelled From Table Top.
Reduces Saw Noise.
Kerf Serves As Handy Stock Alignment Guide.
Reduced Chip-Out And Splintering.
Features
- Supports work right up to the blade
- Reduced chip-out and splintering
- Reduces sawdust expelled from table top
- Kerf serves as handy stock alignment guide
- Reduces saw noise
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Weight: 0.90 Pounds
See On Amazon #3
Leecraft CR-1 Zero Clearance Table Saw Insert (For Craftsman/Sears)(Colors May Vary)
Asin: B0000DD1BJ | Model: CR-1 | PartNumber: CR-1 | Ean: 0670218952011, 5448095793660, 0733353712008, 5915903643306 | UPC: 670218952011, 733353712008
Measures: 14" X 3-3/4" X 3/16" (Please Measure Before Ordering).
Please Note: Cr-1 Does Not Fit Models Ts2400ls, Ts2400-1 Or The New Ts2410 (See Rg-2).
Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Fits: Sears Craftsman 10" Belt-Drive Models 1977 To Mid 2004 (Check Size, See Dl-1U), Ridgid Ts2412, Ts2424, Ts2400.
Features
- Elimantes dangerous gap around blade where thin off-cuts can get wedged
- Fits: Sears Craftsman 10 belt-drive models 1977 to mid 2004 (check size, see DL-1U), RIDGID TS2412, TS2424, TS2400
- Measures: 14 x 3-3/4 x 3/16 (PLEASE MEASURE before ORDERING)
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- PLEASE NOTE: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410 (See RG-2)
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 0.70 x 3.75 x 14.35 inches | Weight: 1.01 Pounds
See On Amazon #4
Leecraft JT-7 Zero Clearance Table Saw Insert (For Jet/Laguana)(Colors May Vary)
Asin: B010L6JT90 | Model: JT-7 | PartNumber: JT-7 | Ean: 0082045098921 | UPC: 082045098921
Offers Superior Rigidity, Flatness, Durability, And Low Friction; Reduces Chip-Out And Splintering.
Installation Instructions Included.
Eliminates Dangerous Gap Around Blade Where Thin Off-Cuts Can Get Wedged.
Measures: 14" X 4-1/8" X (Please Measure Before Ordering).
Features
- Fits: Jet ProShop Saw: JPS-10TS, 708490, 708491, 708493, 708494, 708495, Laguna Fusion 1.75hp 10" Table Saw, Baleigh TS-1044H, General International 50-090R M1
- Measures: 14 x 4-1/8 x (Please measure before ordering)
- Offers superior rigidity, flatness, durability, and low friction; reduces chip-out and splintering
- Eliminates dangerous gap around blade where thin off-cuts can get wedged
- Installation instructions included
- See more on Amazon...
Brand: Leecraft | Manufacturer: Leecraft
Dimensions: 0.50 x 14.00 x 4.00 Inches | Weight: 1.20 Pounds
See On Amazon
Looking For Something Else?
Search