OTC 1959M Truck Wheel Bearing Locknut Socket - 8 Point, 106 mm Opening Size
Asin: B00063YJAI | Model: 1959M | PartNumber: 1959M | Ean: 0731413008092 | UPC: 731413008092
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Designed For Use With 3/4 Inch, Square-Drive Manual Tools Only.
8 Point, 106 Mm (Flat To Flat) Opening Size With 5 Inch Depth; To Determine Socket Size Needed, Measure Locknut From Flat To Flat.
Otc Wheel Bearing Locknut Sockets Are Formed From High-Strength Steel That Is Resistant To Rounding Out Under High Torque Loads.
Features
- Wheel bearing locknuts are easy to remove or install with these specially designed sockets
- OTC wheel bearing locknut sockets are formed from high-strength steel that is resistant to rounding out under high torque loads
- Designed for use with 3/4 inch, square-drive MANUAL tools only
- 8 point, 106 mm (flat to flat) opening size with 5 inch depth; to determine socket size needed, measure locknut from flat to flat
- See more on Amazon...
First Available: 09/09/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 3.70 x 4.30 x 4.30 Inches | Weight: 0.00 Pounds
Warranty: Lifetime limited warranty
See On Amazon Similar To OTC 1959M Truck Wheel Bearing
#1
OTC 6575 Hub Grappler Kit for on Vehicle Wheel Hub and Bearing Removal
Asin: B004ZG69D2 | Model: 6575 | PartNumber: 6575 | Ean: 0731413560156, 0731413550249 | UPC: 731413550249, 731413560156
3/4 Inch Custom Drive Screw Coupled With The Special Equalizer Washer Ensures Smooth Operation While Proprietary Heat Treating Provides 5 To 10 Times Longer Life Than Similar Designs.
Included Application Guide Is The Most Comprehensive On The Market.
Six Adapters Increase Application Coverage; Includes Tie Rod/Ball Joint Tool And Two Ford Axle Installers.
Jaws Are Designed And Sized To Properly Fit Hub Applications And Can Be Quickly Located On The Puller Bar Without The Need For Fasteners.
Features
- The Hub Grappler is a complete solution for servicing wheel hubs/bearings on the vehicle w/o removing the steering components or knuckle - eliminating unnecessary alignments or the use of a shop press
- Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the need for fasteners
- 3/4 inch custom drive screw coupled with the special equalizer washer ensures smooth operation while proprietary heat treating provides 5 to 10 times longer life than similar designs
- Six adapters increase application coverage; includes tie rod/ball joint tool and two Ford axle installers
- Included Application Guide is the most comprehensive on the market
- See more on Amazon...
First Available: 08/02/2011
Brand: OTC | Manufacturer: OTC
Dimensions: 15.50 x 26.25 x 7.50 inches | Weight: 0.05 pounds
Warranty: Lifetime
See On Amazon #2
OTC 4534 Multi Purpose Bearing and Pulley Puller Set
Asin: B00061SM9E | Model: 4534 | PartNumber: 4534 | Ean: 0731413040276 | UPC: 731413040276
Set Components Deliver A Spread Of 3 Inches To 5 Inches And A Reach Of 1 Inch To 2-1/4 Inches.
Durable Blow-Molded Plastic Storage Case That Keeps Set Components Contained And Organized So They Are Ready For Use When Needed.
Kit Includes 2 Ea. Forcing Screws (Live Center), 2 Ea. Cross-Bar Yokes, 2 Ea. Clamp Bolts, 3 Pairs Of Puller Jaws, 1 Pair Of Jaw Pins With Ball Spring, And 3 Pairs Of Capped Bolts.
Drop-Forged Components Can Be Used In A Variety Of Combinations.
Features
- For a wide range of pulling jobs including: bearings; alternator, generator, power steering, and crankshaft pulleys; timing gears; harmonic balancers; and more
- Drop-forged components can be used in a variety of combinations
- Set components deliver a spread of 3 inches to 5 inches and a reach of 1 inch to 2-1/4 inches
- Kit includes 2 ea. forcing screws (live center), 2 ea. cross-bar yokes, 2 ea. clamp bolts, 3 pairs of puller jaws, 1 pair of jaw pins with ball spring, and 3 pairs of capped bolts
- Durable blow-molded plastic storage case that keeps set components contained and organized so they are ready for use when needed
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 10.80 x 13.60 x 3.00 inches | Weight: 9.20 pounds
Warranty: Sets & Kits do not have warranty/ see individual p
See On Amazon #3
OTC 4295 Wheel Stud Service Kit
Asin: B009B2M3YO | Model: 4295 | PartNumber: 4295 | Ean: 0731413567346 | UPC: 731413567346
Removes And Installs 10 Studs In Only 10-15 Minutes - Compare To The 20-30 Minutes Required For More Expensive, Competitive Products - Saving You Time And Increasing Productivity.
Set Includes C-Frame With Forcing Screw, Multiple Adapters And A Durable, Blow-Molded Plastic Storage Case That Keeps The Tools Contained And Organized.
Rugged Tool Can Be Powered With An Impact Wrench - No Hydraulic Power Needed.
Installation Achieved By Pushing On The Head, Eliminating The Need For Threaded Adapters Which Reduces The Total Number Of Adapters, Reduces Stud Damage, And Increases Ease Of Use.
Features
- OTC's Wheel Stud Service Kit works on most hubs for both installation and removal of all sizes of studs up to and including those on Class 8 trucks - without the need to remove the hub
- Installation achieved by pushing on the head, eliminating the need for threaded adapters which reduces the total number of adapters, reduces stud damage, and increases ease of use
- Removes and installs 10 studs in only 10-15 minutes - compare to the 20-30 minutes required for more expensive, competitive products - saving you time and increasing productivity
- Rugged tool can be powered with an impact wrench - no hydraulic power needed
- Set includes c-frame with forcing screw, multiple adapters and a durable, blow-molded plastic storage case that keeps the tools contained and organized
- See more on Amazon...
First Available: 12/21/2012
Brand: OTC | Manufacturer: OTC
Dimensions: 5.75 x 19.75 x 16.35 inches | Weight: 0.02 Pounds
Warranty: Lifetime Limited Warranty
See On Amazon #4
OTC 4790 Motorcycle Wheel Bearing Removal/Installation Kit
Asin: B00BVL7YVK | Model: 4790 | PartNumber: 4790 | Ean: 0731413563553 | UPC: 731413563553
Rugged Blow-Molded Storage Case Keeps Set Components Contained And Organized So They Are Ready To Use When You Need Them.
Instructions Included.
Uses Standard Wrenches Or Sockets (Not Included) To Drive The Tool.
Features
- The components included in this kit will allow you to remove and install 3/4 inch, 1 inch, and 25 mm I.D. sealed wheel bearings
- Uses standard wrenches or sockets (not included) to drive the tool
- Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them
- Instructions included
- See more on Amazon...
First Available: 03/16/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 2.30 x 14.60 x 10.40 inches | Weight: 0.00 Pounds
Warranty: One Year Limited Warranty
See On Amazon #5
OTC (7494A) Rear Axle Bearing Service Set
Asin: B000MN4KQ0 | Model: 7494A | PartNumber: 7494A | Ean: 0731413031465 | UPC: 731413031465
This Reduces Damage And Increases The Amount Of Applications.
Includes One Each 7495A 7496A And 7497A And A Storage Case.
Set Includes Three Pullers To Service Most Domestic Cars.
The New Design Allows You To Capture The Bearing Firmly Distributing The Pulling Force Over The Entire Bearing.
Features
- All three pullers have been redesigned to make the removal of semi-floating rear axle bearings easier
- The new design allows you to capture the bearing firmly distributing the pulling force over the entire bearing
- This reduces damage and increases the amount of applications
- Set includes three pullers to service most domestic cars
- Includes one each 7495A 7496A and 7497A and a storage case
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 2.80 x 8.60 x 5.90 inches | Weight: 0.50 Pounds
Warranty: Limited lifetime warranty
See On Amazon #6
OTC (1183) Bearing Splitter Combo Set
Asin: B000X1E3F4 | Model: 1183 | PartNumber: 1183 | Ean: 0731413026072, 0692764471327 | UPC: 692764471327, 731413026072
When Used With An Otc 'Grip-O-Matic' Puller, Puller Jaws Grip Attachment’S Outer Edge; When Used With A Push-Puller, Puller Legs Are Threaded Into The Attachment’S Two Tapped Holes.
1121 - 1/4 To 15/16 Inch Spread, 1122 - 1/8 To 2 Inch Spread, 1123 - 1/2 To 4-5/8 Inch Spread, 1130 - 1/2 To 9 Inch Spread, 679 - Pulley Pulling Attachment - 1-3/4 To 5-7/8 Inch Spread.
Constructed From High Strength Materials Designed For Long Term Use Under The Harshest Conditions.
Otc's Bearing Splitters Feature 'Knife-Like' Edges Which Are Easily Placed Behind The Part To Secure A Gripping Surface, Even When Clearances Are Extremely Limited.
Features
- Contains four of OTC's most popular bearing splitters, plus a pulley pulling attachment; rugged organizer case is included, enabling you to keep the tools together for instant use
- OTC's Bearing Splitters feature 'knife-like' edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited
- When used with an OTC 'Grip-O-Matic' puller, puller jaws grip attachment s outer edge; when used with a Push-Puller, puller legs are threaded into the attachment s two tapped holes
- Constructed from high strength materials designed for long term use under the harshest conditions
- 1121 - 1/4 to 15/16 inch spread, 1122 - 1/8 to 2 inch spread, 1123 - 1/2 to 4-5/8 inch spread, 1130 - 1/2 to 9 inch spread, 679 - pulley pulling attachment - 1-3/4 to 5-7/8 inch spread
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 4.10 x 22.00 x 17.80 inches | Weight: 30.90 Pounds
Warranty: Limited lifetime warranty
See On Amazon #7
OTC OTC32937 Hub Puller Leg (for Otc7394), 1 Pack
Asin: B000HTNOH0 | Model: OTC32937 | PartNumber: OTC32937 | Ean: 0731413047862 | UPC: 731413047862
This Product Is Manufactured In United States.
Fit Type: Vehicle Specific.
Specially Designed Jaw Tips Fit Small Puller Pockets Found On The Back Of The Pulley.
Features
- Easily removes damper pulleys. Fits into tight engine compartments, no need to remove radiator
- Specially designed jaw tips fit small puller Pockets found on the back of the pulley
- This product is manufactured in United States
- Fit type: Vehicle Specific
- See more on Amazon...
First Available: 09/17/2018
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 7.01 x 2.00 inches | Weight: 1.00 Pounds
Warranty: Call vendor for warranty
See On Amazon #8
OTC 9850 6-Point Truck Wheel Bearing Locknut Socket Set with Tool Board
Asin: B000OCIWVI | Model: 9850 | PartNumber: 9850 | Ean: 0731413013973 | UPC: 731413013973
Set Comes With A Handy Wall Mount Display Board, Labeled With Size And Part Number, That Keeps Sockets Contained And Organized So They Are Ready When You Need Them.
No. 1920 2-1/4 Inch, No. 1921 2-1/2 Inch, No. 1922 2-5/8 Inch, No. 1923 2-3/4 Inch, No. 1926 3-3/4 Inch, No. 1928 2-9/16 (Rounded), No. 1932 2-7/8 Inch, No. 1934 3-1/8 Inch, No. 1936 2-3/8 Inch (Rounded), And No. 1939 5-1/4 Inch.
Set Includes: No. 1901 2-3/32 Inch, No. 1902 2-3/8 Inch, No. 1904 2-9/16 Inch, No. 1906 3 Inch, No. 1908 3-1/4 Inch, No. 1910 3-1/2 Inch, No. 1912 3-7/8 Inch, No. 1914 4 Inch, No. 1915 4-1/8 Inch, No. 1916 4-3/8 Inch, No. 1918 4-7/8 Inch.
Truck Wheel Bearing Locknuts Are Easy To Remove Or Install With These Specially Designed Sockets Featuring High-Strength Steel Construction That Resists Rounding Out Under High Torque Loads.
Features
- OTC's set of 6 Pt., 3/4 inch drive truck wheel bearing locknut sockets includes the 21 popular sizes your shop uses the most
- Truck wheel bearing locknuts are easy to remove or install with these specially designed sockets featuring high-strength steel construction that resists rounding out under high torque loads
- Set comes with a handy wall mount display board, labeled with size and part number, that keeps sockets contained and organized so they are ready when you need them
- Set includes: No. 1901 2-3/32 inch, No. 1902 2-3/8 inch, No. 1904 2-9/16 inch, No. 1906 3 inch, No. 1908 3-1/4 inch, No. 1910 3-1/2 inch, No. 1912 3-7/8 inch, No. 1914 4 inch, No. 1915 4-1/8 inch, No. 1916 4-3/8 inch, No. 1918 4-7/8 inch
- No. 1920 2-1/4 inch, No. 1921 2-1/2 inch, No. 1922 2-5/8 inch, No. 1923 2-3/4 inch, No. 1926 3-3/4 inch, No. 1928 2-9/16 (Rounded), No. 1932 2-7/8 inch, No. 1934 3-1/8 inch, No. 1936 2-3/8 inch (Rounded), and No. 1939 5-1/4 inch
- See more on Amazon...
First Available: 11/15/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 16.00 x 34.00 x 26.00 inches | Weight: 0.07 pounds
Warranty: Lifetime limited warranty
See On Amazon #9
OTC (6575-4) Hub Grappler Case
Asin: B005F3GCUY | Model: 6575-4 | PartNumber: 6575-4 | Ean: 0731413560224 | UPC: 731413560224
Fits The Hub Grappler Puller And Adapters.
For The Otc 6575 Hub Grappler.
Brand: OTC | Manufacturer: OTC
Dimensions: 7.00 x 26.00 x 15.50 inches | Weight: 9.75 Pounds
See On Amazon #10
OTC 6290A Front Hub Puller
Asin: B00DGFQTF6 | Model: 6290A | PartNumber: 6290A | Ean: 0731413572739 | UPC: 731413572739
Services 1988-2013 Gm 1/2-Ton, 3/4-Ton, And 1-Ton Trucks, Tahoe, Suburban, And Yukon.
Services 1998-2013 Ford 3/4-Ton And 1-Ton Trucks And Excursion.
Services 1994-2013 Dodge 3/4-Ton And 1-Ton Ram Trucks.
Provides The Mechanical Advantage And Straight Pull Not Possible With A Slide Hammer; For 4Wd Vehicles.
Features
- For removal of the front hub assembly; necessary for wheel bearing or brake rotor service
- Provides the mechanical advantage and straight pull not possible with a slide hammer; for 4WD vehicles
- Services 1988-2013 GM 1/2-ton, 3/4-ton, and 1-ton trucks, Tahoe, Suburban, and Yukon
- Services 1994-2013 Dodge 3/4-ton and 1-ton RAM trucks
- Services 1998-2013 Ford 3/4-ton and 1-ton trucks and Excursion
- See more on Amazon...
First Available: 07/19/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 2.70 x 10.80 x 5.40 inches | Weight: 7.30 Pounds
Warranty: Limited Lifetime Warranty
See On Amazon
Looking For Something Else?
Search