WEST SYSTEM 403-28 Microfibers, 20 oz
Asin: B0006JJ9U2 | Model: 403-28 | PartNumber: 403-28 | Ean: 0783847065240, 0811343011215 | UPC: 783847065240, 811343011215
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.For Maximum Strength Add Only Enough Filler To Completely Bridge Gaps Between Surfaces Without Sagging Or Running Out Of The Joint Or Gap. A Small Amount Should Squeeze Out Of The Joints When Clamped. For Thick Mixtures, Don’T Fill The Mixing Cup More Than 1/3 Full Of Epoxy Before Adding Filler..
For Consistency Across A Project That Calls For Several Batches Of Epoxy That's Thickened To The Same Degree, You Can Create Your Own Epoxy/Filler "Recipe." Carefully Measure The Amount Of Filler You Add To The First Epoxy Batch Until It Reaches The Viscosity You Need, Keeping Track Of The Total Amount You've Added. Mix The Same Amounts Of Resin, Hardener, And Filler For The Remaining Batches So They All Have The Same Viscosity..
The Amount Of Filler You Add Controls Epoxy's Viscosity. There Is No Strict Formula, Just Use Your Eye To Judge What Consistency Will Work Best For The Job At Hand. The Chart Below Offers Guidelines To The Differences Between Neat (Unthickened) Epoxy And Three Popular Consistencies Of Thickened Epoxy: "Catsup," "Mayonnaise," And "Peanut Butter.".
Thicken Epoxy With This High-Density Filler To Make A Non-Slumping Adhesive That Will Bridge Large Gaps. It Will Strongly Bond Wood Joints, Saving You The Time And Labor Involved In Crafting Tight Joinery..
Features
- THIS BLEND OF FINE FIBERS thickens mixed epoxy resin and hardener to create a multi-purpose adhesive. Its most popular use is for bonding wood. Epoxy thickened with microfibers has good gap-filling qualities but will still do an excellent job of wetting-out/penetrating into wood fibers. Use it to thicken any WEST SYSTEM Epoxy including 105 Resin-based epoxies, G/flex or G/5. Blended with epoxy, it will cure to an off-white color.
- THICKEN EPOXY with this high-density filler to make a non-slumping adhesive that will bridge large gaps. It will strongly bond wood joints, saving you the time and labor involved in crafting tight joinery.
- FOR MAXIMUM STRENGTH add only enough filler to completely bridge gaps between surfaces without sagging or running out of the joint or gap. A small amount should squeeze out of the joints when clamped. For thick mixtures, don t fill the mixing cup more than 1/3 full of epoxy before adding filler.
- THE AMOUNT OF FILLER you add controls epoxy's viscosity. There is no strict formula, just use your eye to judge what consistency will work best for the job at hand. The chart below offers guidelines to the differences between neat (unthickened) epoxy and three popular consistencies of thickened epoxy: catsup, mayonnaise, and peanut butter.
- FOR CONSISTENCY across a project that calls for several batches of epoxy that's thickened to the same degree, you can create your own epoxy/filler recipe. Carefully measure the amount of filler you add to the first epoxy batch until it reaches the viscosity you need, keeping track of the total amount you've added. Mix the same amounts of resin, hardener, and filler for the remaining batches so they all have the same viscosity.
- See more on Amazon...
Brand: West System | Manufacturer: Gougeon Brothers, Inc.
Dimensions: 12.00 x 21.00 x 16.00 Inches | Weight: 1.00 pounds
Warranty: LIMITED WARRANTY
See On Amazon Similar To WEST SYSTEM 40328 Microfibers 20
#1
West System 205-B Fast Hardener
Asin: B0002NY6SW | Model: 205-B | PartNumber: 205-B | Ean: 0799916783816, 0780333707172, 0811343010577 | UPC: 811343010577, 780333707172, 799916783816
- Cures At Temperatures As Low As 40°F (4°C). Will Cure Faster At Warmer Temperatures. Pot Life Is 9 To 12 Minutes. Cures To A Solid State In 6 To 8 Hours. Cures To Maximum Strength In 1 To 4 Days. Minimum Recommended Working Temperature Is 40°F (4°C)..
- Easily Modified With West System Fillers, Additives, And Pigments To Suit The Job At Hand, Whether Coating, Applying Fiberglass, Structural Bonding, Or Fairing. Not Intended For Clear Coating..
- Pair With West System 105-B Epoxy Resin. Blend With With West System 105 Epoxy Resin At A 5-Parts Resin To 1-Part Hardener Ratio..
- Mix With West System 105 Resin In A Five-Part Resin To One-Part Hardener Ratio. The Resulting Cured Epoxy Is A Rigid, High-Strength, Moisture-Resistant Solid. The Combination Of 105 Resin/205 Fast Hardener Has Excellent Bonding And Coating Properties..
Features
- - 205 FAST HARDENER is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature.
- - MIX WITH WEST SYSTEM 105 Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties.
- - CURES AT TEMPERATURES as low as 40 F (4 C). Will cure faster at warmer temperatures. Pot life is 9 to 12 Minutes. Cures to a solid state in 6 to 8 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 40 F (4 C).
- - PAIR WITH WEST SYSTEM 105-B Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 5-parts resin to 1-part hardener ratio.
- - EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand, whether coating, applying fiberglass, structural bonding, or fairing. Not intended for clear coating.
- See more on Amazon...
Brand: West System | Manufacturer: WEST SYSTEM
Dimensions: 7.30 x 2.40 x 4.55 inches | Weight: 2.20 pounds
See On Amazon #2
WEST SYSTEM 404-45 High Density Filler 43oz., Off-White
Asin: B0006JJAU6 | Model: 404-45 | PartNumber: 404-45 | Ean: 0811343011413 | UPC: 811343011413
Thicken Epoxy With This High-Density Filler To Make A Non-Slumping Adhesive That Will Bridge Large Gaps. It Will Strongly Bond Wood Joints, Saving You The Time And Labor Involved In Crafting Tight Joinery..
The Amount Of Filler You Add Controls Epoxy's Viscosity. For Hardware Bonding, Mix 404 High-Density Filler Into Epoxy To Create A Moderately Loose Slurry. It Should Be Thick Enough To Stay In A Horizontal Hole, But Not Too Thick. The Chart Below Offers Guidelines To The Differences Between Neat (Unthickened) Epoxy And Three Popular Consistencies Of Thickened Epoxy: "Catsup," "Mayonnaise," And "Peanut Butter.".
For Maximum Strength Add Only Enough Filler To Completely Bridge Gaps Between Surfaces Without Sagging Or Running Out Of The Joint, Pilot Hole, Or Gap. A Small Amount Should Squeeze Out Of The Joints When Clamped, Or When Hardware Is Inserted. For Thick Mixtures, Don’T Fill The Mixing Cup More Than 1/3 Full Of Epoxy Before Adding Filler..
Hardware Or Stud Bonding Is A Popular Use Of This Filler. Even Small Amounts Of This 404-High Density Added To A Blend Of Epoxy Resin And Hardener Will Reduce Creep In The Cured Epoxy. Mix This Filler Into Liquid Epoxy To Create Slurry. It Should Be Thick Enough To Stay In A Horizontal Hole, But Not Too Thick. (Blending Too Much Filler Into Epoxy Can Trap Air.).
Features
- THIS EPOXY THICKENING additive maximizes epoxy's adhesive properties in hardware bonding or wherever high-cyclic loads are expected. Blended with epoxy for an excellent gap filler, to creating structural fillets, or wherever you need an especially strong bond. Blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Blended with epoxy, it will cure to an off-white color.
- HARDWARE OR STUD BONDING is a popular use of this filler. Even small amounts of this 404-High Density added to a blend of epoxy resin and hardener will reduce creep in the cured epoxy. Mix this filler into liquid epoxy to create slurry. It should be thick enough to stay in a horizontal hole, but not too thick. (Blending too much filler into epoxy can trap air.)
- THICKEN EPOXY with this high-density filler to make a non-slumping adhesive that will bridge large gaps. It will strongly bond wood joints, saving you the time and labor involved in crafting tight joinery.
- FOR MAXIMUM STRENGTH add only enough filler to completely bridge gaps between surfaces without sagging or running out of the joint, pilot hole, or gap. A small amount should squeeze out of the joints when clamped, or when hardware is inserted. For thick mixtures, don t fill the mixing cup more than 1/3 full of epoxy before adding filler.
- THE AMOUNT OF FILLER you add controls epoxy's viscosity. For hardware bonding, mix 404 High-Density filler into epoxy to create a moderately loose slurry. It should be thick enough to stay in a horizontal hole, but not too thick. The chart below offers guidelines to the differences between neat (unthickened) epoxy and three popular consistencies of thickened epoxy: catsup, mayonnaise, and peanut butter.
- See more on Amazon...
Brand: West System | Manufacturer: Gougeon Brothers, Inc.
Dimensions: 11.50 x 21.25 x 16.00 inches | Weight: 1.00 pounds
Warranty: Limited Warranty
See On Amazon #3
West System 205-A Fast Hardener
Asin: B0002NY6T6 | Model: 205-A | PartNumber: 205-A | Ean: 0678358932108, 0811343010027 | UPC: 678358932108, 811343010027
Cures At Temperatures As Low As 40°F (4°C). Will Cure Faster At Warmer Temperatures. Pot Life Is 9 To 12 Minutes. Cures To A Solid State In 6 To 8 Hours. Cures To Maximum Strength In 1 To 4 Days. Minimum Recommended Working Temperature Is 40°F (4°C)..
Easily Modified With West System Fillers, Additives, And Pigments To Suit The Job At Hand, Whether Coating, Applying Fiberglass, Structural Bonding, Or Fairing. Not Intended For Clear Coating..
Pair With West System 105-A Epoxy Resin. Blend With With West System 105 Epoxy Resin At A 5-Parts Resin To 1-Part Hardener Ratio..
Mix With West System 105 Resin In A Five-Part Resin To One-Part Hardener Ratio. The Resulting Cured Epoxy Is A Rigid, High-Strength, Moisture-Resistant Solid. The Combination Of 105 Resin/205 Fast Hardener Has Excellent Bonding And Coating Properties..
Features
- 205 FAST HARDENER is a medium-viscosity epoxy curing agent. It is useful in a majority of bonding situations, and at lower temperatures. 205 Fast Hardener produces a rapid epoxy cure that develops physical properties quickly at room temperature.
- MIX WITH WEST SYSTEM 105 Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The combination of 105 Resin/205 Fast Hardener has excellent bonding and coating properties.
- CURES AT TEMPERATURES as low as 40 F (4 C). Will cure faster at warmer temperatures. Pot life is 9 to 12 Minutes. Cures to a solid state in 6 to 8 hours. Cures to maximum strength in 1 to 4 days. Minimum recommended working temperature is 40 F (4 C).
- PAIR WITH WEST SYSTEM 105-A Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 5-parts resin to 1-part hardener ratio.
- EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand, whether coating, applying fiberglass, structural bonding, or fairing. Not intended for clear coating.
- See more on Amazon...
Brand: West System | Manufacturer: Gougeon Brothers, Inc.
Dimensions: 3.65 x 2.60 x 2.60 inches | Weight: 0.60 pounds
Warranty: LIMITED WARRANTY
See On Amazon #4
West System 405 Filleting Blend 11oz.
Asin: B01LFL2BEU | Model: 405-1 | PartNumber: 405-1 | Ean: 5023181040509 | UPC: 811343011468
For Maximum Strength Add Only Enough Filler To Completely Bridge Gaps Between Surfaces Without Sagging Or Running Out Of The Joint Or Gap. A Small Amount Should Squeeze Out Of The Joints When Clamped. For Thick Mixtures, Don’T Fill The Mixing Cup More Than 1/3 Full Of Epoxy Before Adding Filler..
For Consistency Across A Project That Calls For Several Batches Of Epoxy That's Thickened To The Same Degree, You Can Create Your Own Epoxy/Filler "Recipe." Carefully Measure The Amount Of Filler You Add To The First Epoxy Batch Until It Reaches The Viscosity You Need, Keeping Track Of The Total Amount You've Added. Mix The Same Amounts Of Resin, Hardener, And Filler For The Remaining Batches So They All Have The Same Viscosity..
The Amount Of Filler You Add Controls Epoxy's Viscosity. There Is No Strict Formula, Just Use Your Eye To Judge What Consistency Will Work Best For The Job At Hand. The Chart Below Offers Guidelines To The Differences Between Neat (Unthickened) Epoxy And Three Popular Consistencies Of Thickened Epoxy: "Catsup," "Mayonnaise," And "Peanut Butter.".
You Don't Need Perfectly Fitting Joints When You Use Epoxy Thickened With 405 Filleting Blend. Compared To Traditional Joinery Methods, Fillets Can Also Save You The Expense, Weight, And Labor Of Adding Screws Or Other Fasteners—Without Sacrificing Joint Strength..
Features
- THIS STRONG WOOD_TONED epoxy filler is added to epoxy for making epoxy joints and fillets on naturally finished wood. It mixes easily with epoxy to helps you create smooth fillets that will need only a little sanding. Can be blended with other WEST SYSTEM Fillers to modify the shade of your epoxy mix. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Blended with epoxy, it will cure to a consistent brown color.
- YOU DON'T NEED perfectly fitting joints when you use epoxy thickened with 405 Filleting Blend. Compared to traditional joinery methods, fillets can also save you the expense, weight, and labor of adding screws or other fasteners without sacrificing joint strength.
- FOR MAXIMUM STRENGTH add only enough filler to completely bridge gaps between surfaces without sagging or running out of the joint or gap. A small amount should squeeze out of the joints when clamped. For thick mixtures, don t fill the mixing cup more than 1/3 full of epoxy before adding filler.
- THE AMOUNT OF FILLER you add controls epoxy's viscosity. There is no strict formula, just use your eye to judge what consistency will work best for the job at hand. The chart below offers guidelines to the differences between neat (unthickened) epoxy and three popular consistencies of thickened epoxy: catsup, mayonnaise, and peanut butter.
- FOR CONSISTENCY across a project that calls for several batches of epoxy that's thickened to the same degree, you can create your own epoxy/filler recipe. Carefully measure the amount of filler you add to the first epoxy batch until it reaches the viscosity you need, keeping track of the total amount you've added. Mix the same amounts of resin, hardener, and filler for the remaining batches so they all have the same viscosity.
- See more on Amazon...
Brand: West System | Manufacturer: West System
Dimensions: 7.50 x 3.50 x 3.50 inches | Weight: 0.80 Pounds
See On Amazon #5
West Systems Microfibers - 6 Oz 4039
Asin: B0851HGXJ5 | Model: 655-4039 | PartNumber: 655-4039
Brand: ESM
See On Amazon #6
West System Microfibers, 6 Oz.
Asin: B0000AY1NY | Model: 403-9 | PartNumber: 403-9 | Ean: 0656166553654, 5023181040301, 0751738449141, 0811343011192 | UPC: 811343011192, 751738449141, 656166553654
Brand: West System | Manufacturer: WEST SYSTEM
Dimensions: 7.50 x 3.60 x 3.60 inches | Weight: 0.33 pounds
Warranty: Limited Warranty
See On Amazon #7
West System 405 Filleting Blend
Asin: B005150RT8 | Ean: 0811343011468 | UPC: 811343011468
Can Blend It Into Any West System 105 Resin/Hardener Combination, G/Flex Epoxy 650, Or G/5 Five-Minute Adhesive..
Can Be Blended With Other West System Fillers To Modify The Shade Of Your Epoxy Mix..
Features
- West System 405 Filleting Blend Adhesive Filler is a strong, wood-toned epoxy filler.
- Can be blended with other WEST SYSTEM Fillers to modify the shade of your epoxy mix.
- Can blend it into any WEST SYSTEM 105 Resin/Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.
- See more on Amazon...
Brand: West System | Manufacturer: Gougeon Brothers, Inc.
Dimensions: 6.00 x 6.00 x 6.00 inches | Weight: 0.80 Pounds
See On Amazon
Looking For Something Else?
Search