Kimbrough 147 Spur Gear 48P, 84T
Asin: B0006N6TYC | Model: KIM147 | PartNumber: KIM147 | Ean: 0610960001476 | UPC: 610960001476
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Kimbrough Spur Gears Last Longer Than Stock Factory Spur Gears.
Kimbrough Uses The Best Technology And Methods For Producing Near Flawless Products.
Features
- Made from high quality materials for long lasting performance
- Kimbrough uses the best technology and methods for producing near flawless products
- Kimbrough spur gears last longer than stock factory spur gears
- See more on Amazon...
Brand: Kimbrough | Manufacturer: HRP (Level 3 Products)
Dimensions: 4.50 x 4.00 x 0.19 inches | Weight: 0.06 Pounds
Warranty: No Warranty
See On Amazon Similar To Kimbrough 147 Spur Gear 48P
#1
Traxxas 4686 Spur Gear 48P, 86T
Asin: B000HKH0TC | Model: TRA4686 | PartNumber: TRA4686 | Ean: 0783329552008, 0734548775921, 0020334468604 | UPC: 734548775921, 783329552008, 020334468604
One Gear Per Package.
86-Tooth, 48-Pitch.
For Models With Torque-Control Slipper Clutch.
Tough Nylon Construction For High-Power Applications.
Features
- Optional Traxxas spur gears allow you to increase or decrease the final drive ratio and tune for different applications
- Tough nylon construction for high-power applications
- One gear per package
- For models with Torque-Control slipper clutch
- 86-tooth, 48-pitch
- See more on Amazon...
Brand: Traxxas | Manufacturer: Traxxas
Dimensions: 4.88 x 3.25 x 0.75 inches | Weight: 0.00 pounds
Warranty: No Warranty
See On Amazon #2
Kimbrough 142 96 Tooth Spur Gear 48 Pitch
Asin: B0006O1QTO | Model: KIM142 | PartNumber: KIM142 | Ean: 0610960001421 | UPC: 610960001421
The Tooth Shapes Of Kimbrough Racing Products Gears Are Cut With State Of The Art, Wire Electronic Discharge Machines (Edm)..
Gears Are Molded From 4/6 Nylon. This Plastic Is Almost Three Times Tougher And Will Withstand Operating Temperatures 75° To 125° Higher Than Plastics Used By Other R/C Car Gear Manufacturers.
Features
- Kimbrough racing products gears are full width. We do not make narrow or profiled gears because plastic can deform under load.
- Gears are molded from 4/6 nylon. This plastic is almost three times tougher and will withstand operating temperatures 75 to 125 higher than plastics used by other R/C car gear Manufacturers
- The tooth shapes of Kimbrough racing products gears are cut with state of the art, wire electronic Discharge machines (EDM).
- See more on Amazon...
First Available: 01/01/2019
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 0.25 x 2.50 x 3.00 inches | Weight: 0.02 Pounds
See On Amazon #3
Vanquish Products 52t Spur Gear VPSIRC00403 Electric Car/Truck Option Parts
Asin: B093DQSYV7 | Ean: 0791512780978 | UPC: 791512780978
Brand: Incision | Manufacturer: Incision
See On Amazon #4
Kimbrough 149 90 Tooth Spur Gear 48 Pitch
Asin: B0006O1QWQ | Model: KIM149 | PartNumber: KIM149 | Ean: 0610960001490, 0885943513646 | UPC: 610960001490, 885943513646
Item Package Quantity:1.
Country Of Origin: United States.
Item Package Dimensions:0.6 Cm L X 7.9 Cm W X 9.3 Cm H.
Features
- Product Type:Hobbies
- Item Package Dimensions:0.6 cm L X 7.9 cm W X 9.3 cm H
- Item Package Quantity:1
- Country Of Origin: United States
- See more on Amazon...
First Available: 01/01/2019
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 0.25 x 2.50 x 3.00 inches
See On Amazon #5
Kimbrough 146 81 Tooth Spur Gear 48 Pitch
Asin: B0006N6TY2 | Model: KIM146 | PartNumber: KIM146 | Ean: 0783719857874, 0610960001469, 0785239430209 | UPC: 783719857874, 610960001469, 785239430209
The Tooth Shapes Of Kimbrough Racing Products Gears Are Cut With State Of The Art, Wire Electronic Discharge Machines (Edm)..
Gears Are Molded From 4/6 Nylon. This Plastic Is Almost Three Times Tougher And Will Withstand Operating Temperatures 75° To 125° Higher Than Plastics Used By Other R/C Car Gear Manufacturers.
Features
- Kimbrough racing products gears are full width. We do not make narrow or profiled gears because plastic can deform under load.
- Gears are molded from 4/6 nylon. This plastic is almost three times tougher and will withstand operating temperatures 75 to 125 higher than plastics used by other R/C car gear Manufacturers
- The tooth shapes of Kimbrough racing products gears are cut with state of the art, wire electronic Discharge machines (EDM).
- See more on Amazon...
First Available: 01/01/2019
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 0.50 x 2.50 x 3.00 inches | Weight: 0.02 Pounds
See On Amazon #6
Hot Racing SCT887H 87t 48p Hard Anodized Aluminum Spur Gear Asc
Asin: B00XF8EY0G | Model: HRASCT887H | PartNumber: HRASCT887H | Ean: 0782495028959, 0083745603460, 0792158702157, 0787718738004 | UPC: 083745603460, 787718738004, 782495028959, 792158702157
Hot Racing Part Number Sct887h; Upc 083745603460.
This Item Works With: Arrma 1:10 Adx-10 2Wd Buggy, 1:10 Granite Monster Truck, 1:10 Mojave Desert Truck, 1:10 Raider 2Wd Buggy, 1:10 Vorteks Stadium Truck; Associated B44.X, Rc-10 B4.X, Rc-10 B5 And B5m, Rc-10 Original Aluminum Chassis, Rc-10 T4.X, Rc-10 T5, Rc-10Sc5m Short Course, Sc-10 2Wd, Sc10b Buggy.
All Hot Racing Upgrade Parts Are Direct Replacements For Stock Components; Additional Parts Are Not Required.
Features
- Made by Hot Racing; Hot Racing is a United States based company; parts are sourced from Chinese producers
- All Hot Racing upgrade parts are direct replacements for stock components; additional parts are not required
- Hot Racing part number SCT887H; UPC 083745603460
- This item works with: Arrma 1:10 ADX-10 2WD Buggy, 1:10 Granite Monster Truck, 1:10 Mojave Desert Truck, 1:10 Raider 2WD Buggy, 1:10 Vorteks Stadium Truck; Associated B44.x, RC-10 B4.x, RC-10 B5 and B5M, RC-10 original aluminum chassis, RC-10 T4.x, RC-10 T5, RC-10SC5M Short Course, SC-10 2WD, SC10B Buggy
- See more on Amazon...
Brand: Hot Racing | Manufacturer: HRP Distributor CA
Dimensions: 2.00 x 3.00 x 0.25 inches | Weight: 0.03 Pounds
Warranty: No Warranty
See On Amazon #7
ShareGoo Metal 48P Spur Pully Gear 92T Compatible with 3Racing Sakura D4 AWD/RWD 1/10 RC Drift Racing Car
Asin: B073X4BFX6 | Model: 92T | PartNumber: 92T | Ean: 0763846882123 | UPC: 763846882123
Suitable For Most 1:10 On-Road Belt Drive Car, Also Can Use On Some Shaft Drive Car..
Please Attention, Because Of The Motor Gear And This Spur Gear Are Metal, Suggest To Add Lubricating Oil, Not Only To Reduce The Friction Between The Metal Gear, But Also The Sound Will Be A Little Bit Small..
Top Quality Steel Materials & Superb Craftsmanship.
Outer Diameter: 50Mm ,Inner Diameter: 9.5Mm.
Features
- This is a metal 48P spur gear 92T, compatible with Sakura D4 AWD/RWD 1/10 rc car
- Outer diameter: 50mm ,Inner diameter: 9.5mm
- Suitable for most 1:10 on-road belt drive car, also can use on some shaft drive car.
- Top quality steel materials & superb craftsmanship
- Please attention, because of the motor gear and this spur gear are metal, suggest to add lubricating oil, not only to reduce the friction between the metal gear, but also the sound will be a little bit small.
- See more on Amazon...
Brand: Share Goo | Manufacturer: Share Goo
Dimensions: 0.20 x 2.80 x 2.10 inches | Weight: 0.02 pounds
See On Amazon #8
Kimbrough 72 Tooth Spur Gear 48 Pitch 143
Asin: B0006O1QU8 | Ean: 0610960001438 | UPC: 610960001438
Brand: Kimbrough | Manufacturer: KIMBROUGH
Dimensions: 3.25 x 0.25 x 3.00 inches
See On Amazon #9
Hard Steel Spur Gear 76T 48P for Models with Torque Control Slipper Clutch for Traxxas Bandit Slash Rustler Stampede Telluride 4676
Asin: B0BWRYLZH4 | Model: RUS076T-BK | PartNumber: RUS076T-BK | Ean: 9331791131316
Motor Should No Way Exceed 180F (Over 160F Is Not Recommended). Esc Should Not Exceed 160F. Excessive Temperatures Will Shorten The Life Of The Motor And Esc..
Hard Steel More Durable.
Three Washers Use As Needed Underneath Countersunk Washers To Prevent Screw Ends From Protruding Too Far Through Spur Mounting Plate.
Features
- Original number 4676 Please check it to determine if it fit your car or not
- Three washers use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate
- Motor should no way exceed 180F (over 160F is not recommended). ESC should not exceed 160F. Excessive temperatures will shorten the life of the motor and ESC.
- Hard steel more durable
- See more on Amazon...
Brand: EPTNNASO | Manufacturer: EPTNNASO
Weight: 0.05 Pounds
See On Amazon #10
Associated 3924 Spur Gear, 48P/66T
Asin: B00BIEUVM4 | Model: ASCC3924 | PartNumber: ASCC3924 | Ean: 0784695039247 | UPC: 784695039247
Includes: 48 Pitch 66 Tooth Spur Gear.
Includes: 48 Pitch 66 Tooth Spur Gear.
Features
- FEATURES: Plastic construction
- INCLUDES: 48 Pitch 66 Tooth Spur Gear
- INCLUDES: 48 Pitch 66 Tooth Spur Gear
- See more on Amazon...
Brand: Team Associated | Manufacturer: Hobbico Inc
Dimensions: 0.25 x 4.00 x 3.25 inches | Weight: 0.02 pounds
Warranty: See Mfg. website
See On Amazon #11
Kimbrough 163 76 Tooth Spur Gear 48 Pitch
Asin: B000BOKH80 | Model: KIM163 | PartNumber: KIM163 | Ean: 0610960001636 | UPC: 610960001636
Package Quantity: 1.
Country Of Origin: United States.
Product Type: Hobbies.
Features
- Package Dimensions: 1.4 cms (L) x 7.6 cms (W) x 9.1 cms (H)
- Product Type: Hobbies
- Package Quantity: 1
- Country Of Origin: United States
- See more on Amazon...
First Available: 01/01/2019
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 0.25 x 2.50 x 3.00 inches | Weight: 0.01 Pounds
See On Amazon #12
Kimbrough 76T Spur Gear 64P 199
Asin: B002S804R6 | Ean: 0610960001995 | UPC: 610960001995
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 4.38 x 0.25 x 4.00 inches | Weight: 0.02 Pounds
See On Amazon #13
Kimbrough 32 Pitch Spur Gear, 60T: RC10GT
Asin: B0006O1RDY | Model: KIM239 | PartNumber: KIM239 | Ean: 0784029223687, 8856829753571, 0792491400345, 0610960002398, 0885413506765, 0787793285981 | UPC: 792491400345, 784029223687, 787793285981, 885413506765, 610960002398
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 4.00 x 0.20 x 4.00 inches | Weight: 0.02 Pounds
See On Amazon #14
Kimbrough 48 Pitch Spur Gear, 87T
Asin: B0006O1QW6 | Ean: 0610960001483, 0787551055979 | UPC: 787551055979, 610960001483
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 4.00 x 0.20 x 4.00 inches | Weight: 0.04 Pounds
See On Amazon #15
Kimbrough 144 75 Tooth Spur Gear 48 Pitch
Asin: B0006O1QUS | Model: KIM144 | PartNumber: KIM144 | Ean: 0610960001445 | UPC: 610960001445
The Tooth Shapes Of Kimbrough Racing Products Gears Are Cut With State Of The Art, Wire Electronic Discharge Machines (Edm)..
Gears Are Molded From 4/6 Nylon. This Plastic Is Almost Three Times Tougher And Will Withstand Operating Temperatures 75° To 125° Higher Than Plastics Used By Other R/C Car Gear Manufacturers.
Features
- Kimbrough racing products gears are full width. We do not make narrow or profiled gears because plastic can deform under load.
- Gears are molded from 4/6 nylon. This plastic is almost three times tougher and will withstand operating temperatures 75 to 125 higher than plastics used by other R/C car gear Manufacturers
- The tooth shapes of Kimbrough racing products gears are cut with state of the art, wire electronic Discharge machines (EDM).
- See more on Amazon...
First Available: 01/01/2019
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 0.25 x 2.50 x 3.00 inches | Weight: 0.02 Pounds
See On Amazon #16
HRSTE886 STE886 Hot TTraxxas 48P Hardened Steel Spur Gear (86T) (Silver) HRASTE886
Asin: B0933Q1P3Q | Model: HOTSTE886 | PartNumber: HOTSTE886 | Ean: 0094600239854 | UPC: 094600239854
Brand: Replacement Parts | Manufacturer: RCnation
Dimensions: 1.00 x 0.00 x 1.00 inches | Weight: 0.06 Pounds
See On Amazon #17
Kimbrough 228 90 Tooth Spur Gear 64 Pitch
Asin: B00DM60OMI | Model: KIM228 | PartNumber: KIM228 | Ean: 0610960002282 | UPC: 610960002282
The Tooth Shapes Of Kimbrough Racing Products Gears Are Cut With State Of The Art, Wire Electronic Discharge Machines (Edm)..
Gears Are Molded From 4/6 Nylon. This Plastic Is Almost Three Times Tougher And Will Withstand Operating Temperatures 75° To 125° Higher Than Plastics Used By Other R/C Car Gear Manufacturers.
Features
- Kimbrough racing products gears are full width. We do not make narrow or profiled gears because plastic can deform under load.
- Gears are molded from 4/6 nylon. This plastic is almost three times tougher and will withstand operating temperatures 75 to 125 higher than plastics used by other R/C car gear Manufacturers
- The tooth shapes of Kimbrough racing products gears are cut with state of the art, wire electronic Discharge machines (EDM).
- See more on Amazon...
First Available: 01/01/2019
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 0.25 x 2.50 x 3.00 inches | Weight: 0.01 pounds
See On Amazon #18
Kimbrough 44 Tooth Spur Gear 32 Pitch 115
Asin: B0006O1QLC | Ean: 0610960001155 | UPC: 610960001155
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 0.25 x 2.50 x 3.00 inches | Weight: 0.30 Pounds
See On Amazon #19
Kimbrough 145 78 Tooth Spur Gear 48 Pitch
Asin: B0006O1QVM | Model: KIM145 | PartNumber: KIM145 | Ean: 0610960001452 | UPC: 610960001452
The Tooth Shapes Of Kimbrough Racing Products Gears Are Cut With State Of The Art, Wire Electronic Discharge Machines (Edm)..
Gears Are Molded From 4/6 Nylon. This Plastic Is Almost Three Times Tougher And Will Withstand Operating Temperatures 75° To 125° Higher Than Plastics Used By Other R/C Car Gear Manufacturers.
Features
- Kimbrough racing products gears are full width. We do not make narrow or profiled gears because plastic can deform under load.
- Gears are molded from 4/6 nylon. This plastic is almost three times tougher and will withstand operating temperatures 75 to 125 higher than plastics used by other R/C car gear Manufacturers
- The tooth shapes of Kimbrough racing products gears are cut with state of the art, wire electronic Discharge machines (EDM).
- See more on Amazon...
First Available: 01/01/2019
Brand: Kimbrough | Manufacturer: Kimbrough
Dimensions: 0.25 x 2.50 x 3.00 inches | Weight: 0.04 pounds
See On Amazon
Looking For Something Else?
Search