SKF 22340 Transfer Case Rear Output Shaft Seal Spring Loaded with Auxiliary Dirt Lip Inner Case Positive Fluid Control Quality Rubber Minimizes Friction Compatible with Chevrolet Tiltmaster Transmode
Asin: B000C0AU8A | Model: 22340 | PartNumber: 22340 | Ean: 0085311024754 | UPC: 085311024754
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants.
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
Features
- Specifications: Shaft Dia in/mm: 2.250/57.150 | Bore Dia in/mm: 2.997/76.120 | Outer Dia in/mm: 3.001/76.230 | Width in/mm: 0.438/11.130 | Seal Construction Type: CRWHA1 | Seal Lip Material: Nitrile | Boretite: Yes
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
- Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
- The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 0.63 x 3.13 x 3.13 inches | Weight: 0.00 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon Similar To SKF 22340 Transfer Case Rear
#1
SKF 17340 Grease Seals
Asin: B000EPT836 | Model: 17340 | PartNumber: 17340 | Ean: 0085311018425 | UPC: 085311018425
Item Package Quantity - 1.
Product Type - Auto Part.
Item Package Weight - 0.05 Pounds.
Features
- Item Package Dimension: 3.1L x 3.1W x 0.6H inches
- Item Package Weight - 0.05 Pounds
- Item Package Quantity - 1
- Product Type - AUTO PART
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.63 x 3.13 x 3.13 Inches | Weight: 0.05 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #2
SKF 15635 Transfer Case Rear Output Shaft Seal Spring Loaded with Auxiliary Dirt Lip Positive Fluid Control Compatible with Ford Bronco IHC Light Aristocrat Comanche Scout II 80 800
Asin: B000C07L82 | Model: 15635 | PartNumber: 15635 | Ean: 0085311015851 | UPC: 085311015851
Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants.
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
Features
- Specifications: Shaft Dia in/mm: 1.563/39.700 | Bore Dia in/mm: 2.502/63.550 | Outer Dia in/mm: 2.506/63.650 | Width in/mm: 0.313/7.950 | Seal Construction Type: CRWA1 | Seal Lip Material: Nitrile | Boretite: Yes
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
- Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
- The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.63 x 3.13 x 3.13 inches | Weight: 0.00 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #3
SKF 15031 Transfer Case Rear Output Shaft Seal Spring Loaded High Exclusion and Auxilary Lip Installation Stop Flange Compatible with Jeep Briarwood Cherokee Chief Comanche Grand Cherokee Laredo
Asin: B004AGYA9M | Model: 15031 | PartNumber: 15031 | Ean: 0085311454995 | UPC: 085311454995
Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants.
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
Features
- Specifications: Shaft Dia in/mm: 1.503/38.176 | Bore Dia in/mm: 2.375/60.325 | Outer Dia in/mm: 2.390/60.706 | Width in/mm: 0.720/18.288 | Seal Construction Type: HMSA26 | Seal Lip Material:LongLife | Boretite: No
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
- Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
- The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 0.88 x 4.75 x 4.75 inches | Weight: 0.11 pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #4
SKF 99340 Speedi Sleeve, Inch, 3.48in Shaft Diameter, 0.781in Width
Asin: B00460JFNI | Model: 99340 | PartNumber: 99340 | Ean: 0085311042468 | UPC: 085311042468
"Skf Speedi-Sleeve. These Thin-Walled Stainless Steel Shaft Repair Sleeves Can Come To Immediate Rescue When A Crankshaft Needs A New Sealing Surface. ".
While Installation Is Simple, It Must Be Done With Care In Order To Assure Proper Results. An Installation Tool Is Packaged With Every Sleeve.
"Low In Cost, A Speedi-Sleeve Is Slipped Over The Worn Area Quickly And Easily, And Provides A Surface That Is Actually Harder Than That Of A New Shaft. The Same Size Seal (As The One Being Replaced) Fits Snugly Onto The New Surface. And Each Speedi-Sleeve Comes As A Kit With A Disposable Installation Tool. ".
The Standard Range Of Skf Speedisleeve Sizes Covers Shaft Diameters From .472” To 8” (12 Mm To 200 Mm). The Skf Speedi-Sleeve Is Thinwalled, 0.011” (0,28 Mm), And Made Of High Quality Stainless Steel. The Contact Surface Is Wearresistant With A Finish Of Ra 10 To 20 Μin (0,25 To 0,5 Μm). No Expensive Machining Or Preparation Is Required Before Mounting. Downtime Is Reduced Since Installation Only Takes A Few Minutes.
Features
- The SKF SPEEDI-SLEEVE is a fast and effective way to refinish worn shaft. It s quicker than remetalizing or regrinding, and provides an improved sealing system. The outside surface of an SKF SPEEDI-SLEEVE forms an ideal sealing surface. Many popular regrinding and refinishing techniques produce a surface that cannot be properly sealed
- The standard range of SKF SPEEDISLEEVE sizes covers shaft diameters from .472 to 8 (12 mm to 200 mm). The SKF SPEEDI-SLEEVE is thinwalled, 0.011 (0,28 mm), and made of high quality stainless steel. The contact surface is wearresistant with a finish of Ra 10 to 20 in (0,25 to 0,5 m). No expensive machining or preparation is required before mounting. Downtime is reduced since installation only takes a few minutes
- SKF SPEEDI-SLEEVE. These thin-walled stainless steel shaft repair sleeves can come to immediate rescue when a crankshaft needs a new sealing surface.
- Low in cost, a SPEEDI-SLEEVE is slipped over the worn area quickly and easily, and provides a surface that is actually harder than that of a new shaft. The same size seal (as the one being replaced) fits snugly onto the new surface. And each SPEEDI-SLEEVE comes as a kit with a disposable installation tool.
- While installation is simple, it must be done with care in order to assure proper results. An installation tool is packaged with every sleeve
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA
Dimensions: 3.94 x 9.84 x 0.91 inches | Weight: 0.31 pounds
See On Amazon #5
SKF 7414 Transfer Case Seal
Asin: B006EN9HC4 | Model: 7414 | PartNumber: 7414
Brand: SKF | Manufacturer: SKF
See On Amazon #6
SKF LARGE DIAMETER SEAL (#340X372X16 HDS2 V)
Asin: B01DM9IHAA | Ean: 0085311173117 | UPC: 085311173117
Brand: SKF | Manufacturer: SKF
Weight: 2.18 Pounds
See On Amazon #7
SKF LARGE DIAMETER SEAL (#340X370X16 HDS2 V)
Asin: B01DM9IFB6 | Ean: 0085311476218 | UPC: 085311476218
Brand: SKF | Manufacturer: SKF
Weight: 1.06 Pounds
See On Amazon #8
SKF LARGE DIAMETER SEAL (#300X340X20 HS8 R)
Asin: B01DM9ID9A | Ean: 0085311900997 | UPC: 085311900997
Brand: SKF | Manufacturer: SKF
Weight: 1.36 Pounds
See On Amazon #9
SKF LARGE DIAMETER SEAL (#340X380X20 HDSH2 VT1)
Asin: B01DM9G2NE | Ean: 0085311462365 | UPC: 085311462365
Brand: SKF | Manufacturer: SKF
Weight: 3.14 pounds
See On Amazon #10
SKF LARGE DIAMETER SEAL (#340X380X20 HDS2 R)
Asin: B01DM9FWBC | Ean: 0085311183963 | UPC: 085311183963
Brand: SKF | Manufacturer: SKF
Weight: 2.34 Pounds
See On Amazon #11
SKF 22340 CCK/W33 Spherical Radial Bearing, Tapered Bore, Lubrication Groove, 3 Hole Outer Ring, Steel Cage, Normal Clearance, 200mm Bore, 420mm OD, 138mm Width
Asin: B007VHQ9DM | Ean: 7316576603372
Cn (Normal) Radial Internal Clearance For Applications That Do Not Involve Thermal Expansion Or Atypical Precision.
Three Lubrication Holes In The Outer Ring For Lubrication In Place.
Steel Cage Evenly Spaces The Rollers For Even Load Distribution And Prevents Contact To Reduce Friction, Vibrations, And Noise.
Tapered Bore Compensates For Flexing Shafts And Fits To Tapered Shafts.
Features
- Axially symmetric races to support radial loads while maintaining high speeds and rotational accuracy
- Tapered bore compensates for flexing shafts and fits to tapered shafts
- CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision
- Steel cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
- Three lubrication holes in the outer ring for lubrication in place
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 8.90 x 19.70 x 19.70 inches
See On Amazon #12
SKF 22340 CCK/C2W33 Spherical Radial Bearing, Tapered Bore, Lubrication Groove, 3 Hole Outer Ring, Steel Cage, C2 Clearance, 200mm Bore, 420mm OD, 138mm Width
Asin: B007VHP9WE | Model: 22340 CCK/C2W33 | PartNumber: 22340 CCK/C2W33 | Ean: 7316576603389
C2 Radial Internal Clearance For Radial Slack Between The Inner And Outer Rings Is Less Than Cn (Normal) For More Precise Performance, Reduced Radial Play, And Accompanying Wear.
Three Lubrication Holes In The Outer Ring For Lubrication In Place.
Steel Cage Evenly Spaces The Rollers For Even Load Distribution And Prevents Contact To Reduce Friction, Vibrations, And Noise.
Tapered Bore Compensates For Flexing Shafts And Fits To Tapered Shafts.
Features
- Axially symmetric races to support radial loads while maintaining high speeds and rotational accuracy
- Tapered bore compensates for flexing shafts and fits to tapered shafts
- C2 radial internal clearance for radial slack between the inner and outer rings is less than CN (normal) for more precise performance, reduced radial play, and accompanying wear
- Steel cage evenly spaces the rollers for even load distribution and prevents contact to reduce friction, vibrations, and noise
- Three lubrication holes in the outer ring for lubrication in place
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
See On Amazon #13
SKF 22340 CCK/C3W33 Explorer Spherical Roller Bearing, Tapered Bore, Lubrication Groove, 3 Hole Outer Ring, Unsealed, Steel Cage, C3 Clearance, Metric, 200mm Bore, 420mm OD, 138mm Width, 1500rpm Maximum Rotational Speed, 652000lbf Static Load Capacity, 522000lbf Dynamic Load Capacity
Asin: B006KSZ1IM | Ean: 7316576603396
Flangeless Inner Ring With Cage Guide And Outer Ring With Center Lubrication Groove And Oil Holes.
Bore With 1:12 Taper Compensates For Flexing Shafts And Fits Tapered Shafts.
C3 Radial Clearance Is Larger Than Normal For Applications Where Impact Loads And Vibration Are Severe, Or Thermal Expansion Is A Factor.
Two-Piece Pressed Steel Window-Type Cage Has High Wear Resistance And Spaces The Rollers For Even Load Distribution And Prevents Contact To Reduce Friction, Vibration, And Noise.
Features
- Two row spherical roller bearing suitable for applications that support high radial and oscillating axial loads
- Two-piece pressed steel window-type cage has high wear resistance and spaces the rollers for even load distribution and prevents contact to reduce friction, vibration, and noise
- Flangeless inner ring with cage guide and outer ring with center lubrication groove and oil holes
- C3 radial clearance is larger than normal for applications where impact loads and vibration are severe, or thermal expansion is a factor
- Bore with 1:12 taper compensates for flexing shafts and fits tapered shafts
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 8.90 x 19.70 x 19.70 Inches | Weight: 205.47 Pounds
See On Amazon #14
SKF Seal - 36340
Asin: B00460G4XC | Model: 36340 | PartNumber: 36340 | Ean: 0085311033091 | UPC: 085311033091
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 1.13 x 6.03 x 6.00 Inches | Weight: 0.61 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #15
SKF 12736 Transfer Case Rear Output Shaft Seal Spring Loaded Positive Fluid Control Chemical and Abrasion Resistant Rubber Compatible with Eagle Talon Mitsubishi FWD 3000GT Cordia Diamante Eclipse
Asin: B000CKM0NI | Model: 12736 | PartNumber: 12736 | Ean: 0085311011730 | UPC: 085311011730
Seal Lip Profile All Skf Seals Incorporate A Seal Lip Design That Meets Or Exceeds The Oe Specifications. This Provides The Toughest Exclusion Of Dirt And Contaminants, Reliable Dynamic Sealing And A Long Service Life..
The Case Components Are Made From The Highest Grade Of Carbon Steel, And Are Coated With Phosphate To Ensure Protection Against Rust. Most Metal-Cased Seals Are Coated With Bore-Tite, A Flexible Coating On The Outside Diameter Of The Seal That Fills In Small Housing Bore Imperfections, And Provides A Tight And Leak Proof Seal..
Sealing Element Skf’S Synthetic Rubber Blends Are Formulated From Families Of Complex Polymers To Provide Protection To Operate In Temperatures As Low As Minus 40 Degrees To As High As 400 Degrees Fahrenheit. Today’S Lubricants With Their Aggressive Additive Packages Can Attack The Rubber Compound Of The Seal. Skf Seals Are Engineered To Be Compatible With These Lubricants.
Skf Has A Long History In Sealing Knowledge. From Our Patent On The First Automotive Wheel Seal In 1928, We Have Evolved To A Leading Supplier Of Automotive And Truck Sealing Technology. The Demand For Increased Speeds, Higher Operating Temperatures And Synthetic Lubricants With Aggressive Additives Increase The Stress On Oil And Grease Seals. Skf Seals Deliver Unparalleled Performance Over A Wide Range Of Operating Conditions For Most Automotive And Truck Applications..
Features
- Specifications: Shaft Dia in/mm: 1.260/32.000 | Bore Dia in/mm: 1.890/48.000 | Outer Dia in/mm: 1.895/48.140 | Width in/mm: 0.315/8.000 | Seal Construction Type: CRW1 | Seal Lip Material:LongLife | Boretite: Yes
- SKF has a long history in sealing knowledge. From our patent on the first automotive wheel seal in 1928, we have evolved to a leading supplier of automotive and truck sealing technology. The demand for increased speeds, higher operating temperatures and synthetic lubricants with aggressive additives increase the stress on oil and grease seals. SKF seals deliver unparalleled performance over a wide range of operating conditions for most automotive and truck applications.
- Seal lip profile All SKF seals incorporate a seal lip design that meets or exceeds the OE specifications. This provides the toughest exclusion of dirt and contaminants, reliable dynamic sealing and a long service life.
- Sealing element SKF s synthetic rubber blends are formulated from families of complex polymers to provide protection to operate in temperatures as low as minus 40 degrees to as high as 400 degrees Fahrenheit. Today s lubricants with their aggressive additive packages can attack the rubber compound of the seal. SKF seals are engineered to be compatible with these lubricants
- The case components are made from the highest grade of carbon steel, and are coated with phosphate to ensure protection against rust. Most metal-cased seals are coated with Bore-Tite, a flexible coating on the outside diameter of the seal that fills in small housing bore imperfections, and provides a tight and leak proof seal.
- See more on Amazon...
Brand: SKF | Manufacturer: SKF USA, Inc.
Dimensions: 0.63 x 2.50 x 2.50 Inches | Weight: 0.05 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon #16
SKF 37340 Grease Seals
Asin: B000C0AUJY | Model: 37340 | PartNumber: 37340 | Ean: 0085311033411 | UPC: 085311033411
Item Package Quantity - 1.
Product Type - Auto Part.
Item Package Weight - 0.15 Pounds.
Features
- Item Package Dimension: 4.75L x 4.75W x 0.88H inches
- Item Package Weight - 0.15 Pounds
- Item Package Quantity - 1
- Product Type - AUTO PART
- See more on Amazon...
Brand: SKF | Manufacturer: SKF
Dimensions: 0.88 x 4.75 x 4.75 inches | Weight: 0.15 Pounds
Warranty: 12 Month 12,000 Miles
See On Amazon
Looking For Something Else?
Search