COMP Cams 7826-16 High Energy 6.248" Long, 5/16" Diameter Pushrod Set
Asin: B000CIOBGY | Model: 7826-16 | PartNumber: 7826-16 | Ean: 0036584401353 | UPC: 036584401353
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Meet Or Exceed All Oe Pushrod Specifications.
Durable One-Piece Construction.
Mate Perfectly With High Energyand Magnum Rockers.
Best Choice When Building Street Rods, Rvs Or Daily Drivers.
Features
- 5/16 inch diameter, 6.248 inch length for Small Block Ford 302 with OE Hydraulic Roller Cam
- Best choice when building street rods, RVs or daily drivers
- Meet or exceed all OE pushrod specifications
- Mate perfectly with High Energyand Magnum Rockers
- Durable one-piece construction
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.90 x 10.20 x 4.70 inches | Weight: 1.32 pounds
See On Amazon Similar To COMP Cams 782616 High Energy
#1
COMP Cams 7815-16 High Energy 7.725" and 8.684" Long, 3/8" Diameter Pushrod Set
Asin: B000CESFSS | Model: 7815-16 | PartNumber: 7815-16 | Ean: 0036584401254 | UPC: 036584401254
Meet Or Exceed All Oe Pushrod Specifications.
Durable One-Piece Construction.
Mate Perfectly With High Energyand Magnum Rockers.
Best Choice When Building Street Rods, Rvs Or Daily Drivers.
Features
- 3/8 inch Diameter, 7.725 inch intake length (qt. 8), 8.684 inch exhaust length (qt.8) for Big Block Chevy with retro-fit hydraulic roller cam
- Best choice when building street rods, RVs or daily drivers
- Meet or exceed all OE pushrod specifications
- Mate perfectly with High Energyand Magnum Rockers
- Durable one-piece construction
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 1.60 x 12.40 x 3.60 inches | Weight: 2.36 Pounds
See On Amazon #2
COMP Cams 852-16 High Energy Hydraulic Flat Lifters for Oldsmobile 260-455 and Pontiac 265-455
Asin: B000CIOCRC | Model: 852-16 | PartNumber: 852-16 | Ean: 0036584220398 | UPC: 036584220398
Continuous Contact Between Metering Valve And Hardened Pushrod Seat Is Maintained, Eliminating Excessive Oiling At High Engine Speeds.
Lightweight Check Valve Disc Allows For Quicker Response And Maintains Added Control At All Engine Speeds And Loads.
Contain A Longer Piston Than Conventional Hydraulic Lifters, Which Provides More Load Bearing Surface And Increases Lifter Longevity.
Patented Orifice Metering Valve Precisely Meters Oil To The Rocker Arms.
Features
- .842 diameter; 97g weight; 2.05 seat height
- Patented orifice metering valve precisely meters oil to the rocker arms
- Continuous contact between metering valve and hardened pushrod seat is maintained, eliminating excessive oiling at high engine speeds
- Contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity
- Lightweight check valve disc allows for quicker response and maintains added control at all engine speeds and loads
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.00 x 7.90 x 2.10 inches | Weight: 3.66 Pounds
See On Amazon #3
COMP Cams 7832-16 High Energy 8.412" Long, 5/16" Diameter Pushrod Set
Asin: B000V9ESXK | Model: 7832-16 | PartNumber: 7832-16 | Ean: 0036584400295 | UPC: 036584400295
Best Choice When Building Street Rods, Rvs Or Daily Drivers.
Mate Perfectly With High Energy And Magnum Rockers.
Meet Or Exceed All Oe Pushrod Specifications.
High Energy Pushrod For Ford Cleveland.
Features
- 5/16 inch diameter, 8.412 inch length
- High Energy Pushrod for Ford Cleveland
- Best choice when building street rods, RVs or daily drivers
- Meet or exceed all OE pushrod specifications
- Mate perfectly with High Energy and Magnum Rockers
- See more on Amazon...
First Available: 09/01/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.90 x 11.90 x 5.20 inches | Weight: 1.75 pounds
Warranty: 1 Year Limited
See On Amazon #4
COMP Cams 7827-16 High Energy 6.821" Long, 5/16" Diameter Pushrod Set
Asin: B000CIS9TE | Model: 7827-16 | PartNumber: 7827-16 | Ean: 0036584400905 | UPC: 036584400905
Best Choice When Building Street Rods, Rvs Or Daily Drivers.
Mate Perfectly With High Energy And Magnum Rockers.
Meet Or Exceed All Oe Pushrod Specifications.
High Energy Pushrod For Small Block Ford 289-302; 0.060 Inch Short.
Features
- 5/16 inch diameter, 6.821 inch length
- High Energy Pushrod for Small Block Ford 289-302; 0.060 inch short
- Best choice when building street rods, RVs or daily drivers
- Meet or exceed all OE pushrod specifications
- Mate perfectly with High Energy and Magnum Rockers
- See more on Amazon...
First Available: 09/01/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 1.00 x 12.50 x 4.00 inches | Weight: 1.66 Pounds
Warranty: 1 Year Limited
See On Amazon #5
COMP Cams 7813-1 High Energy 3/8" Diameter 7.725" Length Intake Pushrod for Chevy Big Block Engine with Retro-Fit Hydraulic Roller Cam
Asin: B001R99P0O | Model: 7813-1 | PartNumber: 7813-1 | Ean: 0036584401193 | UPC: 036584401193
Best Choice When Building Street Rods, Rvs Or Daily Drivers.
Mate Perfectly With High Energy And Magnum Rockers.
Meet Or Exceed All Oe Pushrod Specifications.
High Energy Intake Pushrod For Big Block Chevy.
Features
- 3/8 inch diameter; 7.725 inch length
- High Energy Intake Pushrod for Big Block Chevy
- Best choice when building street rods, RVs or daily drivers
- Meet or exceed all OE pushrod specifications
- Mate perfectly with High Energy and Magnum Rockers
- See more on Amazon...
First Available: 08/24/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.20 x 12.00 x 3.00 inches | Weight: 0.15 Pounds
Warranty: 1 Year Limited
See On Amazon #6
COMP Cams 7840-16 High Energy 9.315" Long, 5/16" Diameter Pushrod Set
Asin: B000CESFU6 | Model: 7840-16 | PartNumber: 7840-16 | Ean: 0036584400448 | UPC: 036584400448
Best Choice When Building Street Rods, Rvs Or Daily Drivers.
Mate Perfectly With High Energy And Magnum Rockers.
Meet Or Exceed All Oe Pushrod Specifications.
High Energy Pushrod For Big Block Chrysler 440 With Non-Adjustable Rocker Arms.
Features
- 5/16 inch diameter, 9.315 inch length
- High Energy Pushrod for Big Block Chrysler 440 with Non-Adjustable Rocker Arms
- Best choice when building street rods, RVs or daily drivers
- Meet or exceed all OE pushrod specifications
- Mate perfectly with High Energy and Magnum Rockers
- See more on Amazon...
First Available: 09/01/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.80 x 11.70 x 4.20 inches | Weight: 2.30 Pounds
Warranty: 1 Year Limited
See On Amazon #7
Comp Cams 777816 0.32" Hi-Tech Push Rod
Asin: B00062YFEY | Model: 7778-16 | PartNumber: 7778-16 | Ean: 0036584424598 | UPC: 036584424598
High Quality, Long Lasting Finish - Hi-Tech Series Pushrods Are All Finished With A Black Oxide Coating, Ensuring The The Chromemoly Steel Will Not Rust Or Wear Prematurely. Additionally, We Laser Etch Our Pushrods With The Part Number, Making It Easy To Order Replacements..
Application Specific Sets - While We Sell Our Hi-Tech Series Pushrods From 6.200" To 9.800" Long In Sets Of 16 And Individually, We Also Offer Sets Custom Tailored For Your Application. Comp Cams Has Custom Magnum Pushrod Sets For Chevrolet, Chrysler, Ford, Oldsmobile And Pontiac - Making Ordering Our High End Pushrods Easier Than Ever!.
5/16" And 3/8" - In Addition To Offering Application Specific Sets, We Offer Both 5/16" And 3/8" Diameter Designs: 6.200" To 9.500" In 5/16" And 7.500" To 11.100" In 3/8"..
Race Ready - Quality And Precision Manufactured From Start To Finish, These Pushrods Are At Home In Both Daily Driven Street Vehicles, As Well As Racing Applications. The Magnum Series Is A Great Upgrade From Our High Energy Line, Especially If Aggressive Camshafts And Higher Load Springs Are Part Of Your Build..
Guide Plate Compatible - Hi-Tech Pushrods Are All Heat-Treated Before They Leave Our Facility, Guaranteeing That Using Them With Guideplates Will Not Ruin Them Prematurely..
Features
- Quality Construction - COMP Cams Hi-Tech Series Pushrods are constructed from a single piece of chromemoly steel with a wall thickness 0.080", ensuring these pushrods withstand high loads for the life of the engine and do not flex.
- Guide Plate Compatible - Hi-Tech Pushrods are all heat-treated before they leave our facility, guaranteeing that using them with guideplates will not ruin them prematurely.
- High Quality, Long Lasting Finish - Hi-Tech Series Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely. Additionally, we laser etch our pushrods with the part number, making it easy to order replacements.
- Race Ready - Quality and precision manufactured from start to finish, these pushrods are at home in both daily driven street vehicles, as well as racing applications. The Magnum Series is a great upgrade from our High Energy line, especially if aggressive camshafts and higher load springs are part of your build.
- Application Specific Sets - While we sell our Hi-Tech Series Pushrods from 6.200 to 9.800 long in sets of 16 and individually, we also offer sets custom tailored for your application. COMP Cams has custom Magnum Pushrod Sets for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac - making ordering our high end pushrods easier than ever!
- 5/16 and 3/8 - In addition to offering application specific sets, we offer both 5/16 and 3/8 diameter designs: 6.200 to 9.500 in 5/16 and 7.500 to 11.100 in 3/8.
- See more on Amazon...
First Available: 09/01/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 1.50 x 12.40 x 3.50 inches | Weight: 2.50 Pounds
Warranty: 1 Year Limited
See On Amazon #8
COMP Cams 1211-16 High Energy Rocker Set w/ 1.7 Ratio for Chevrolet Big Block w/ 7/16" Stud
Asin: B000CIO7JK | Model: 1211-16 | PartNumber: 1211-16 | Ean: 0036584320067 | UPC: 036584320067
Include Adjusting Nuts And Pivot Balls Where Required.
Feature A Long Slot For Higher Than Stock Lift Camshafts.
Help To Eliminate Noise And Slop Associated With Worn Or High Mileage Stock Rocker Arms.
Features
- Excellent replacement rocker arms for engine rebuilds with a stock or High Energy Camshaft
- Help to eliminate noise and slop associated with worn or high mileage stock rocker arms
- Include adjusting nuts and pivot balls where required
- Feature a long slot for higher than stock lift camshafts
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.20 x 10.30 x 5.30 inches | Weight: 5.55 Pounds
See On Amazon #9
Comp Cams 7826-1 High Energy 5/16"" Diameter 6.248"" Length Pushrod for Ford Small Block 302 Engine with OE Hydraulic Roller Cam"
Asin: B000P5GGQC | Model: 7826-1 | PartNumber: 7826-1 | Ean: 0036584401346 | UPC: 036584401346
Best Choice When Building Street Rods, Rvs Or Daily Drivers.
Mate Perfectly With High Energy And Magnum Rockers.
Fit Type: Vehicle Specific.
Meet Or Exceed All Oe Pushrod Specifications.
High Energy Pushrod For Small Block Ford 302 With Oe Hydraulic Roller Cam.
Features
- 5/16 inch diameter; 6.248 inch length
- High Energy Pushrod for Small Block Ford 302 with OE Hydraulic Roller Cam
- Best choice when building street rods, RVs or daily drivers
- Meet or exceed all OE pushrod specifications
- Mate perfectly with High Energy and Magnum Rockers
- Fit type: Vehicle Specific
- See more on Amazon...
First Available: 08/24/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.10 x 12.00 x 3.00 inches
Warranty: 1 Year Limited
See On Amazon #10
COMP Cams 26925-16 Race Street 1.320" OD Dual Springs; 1.810" Installed Height; 16 Springs
Asin: B0046ZHIAU | Model: 26925-16 | PartNumber: 26925-16 | Ean: 0036584200895 | UPC: 036584200895
Modern Performance + Vintage Iron - Comp's Race Street Springs Are Available In Installed Heights From 1.640" - 2.000" And . O.D.'S From 1.101" To 1.590", Making Them Ideal For A Wide Range Of Modern Heads And Oe Iron Heads. Just Match Your Spring Pocket Measurements To The Appropriate Spring Base Od, Then Check The Spring Max Lift Against Your Valve Lift To Ensure A Good Spring For Your Heads..
Gm Gen Iii/Iv Ls - A Drop-In Dual Spring Solution For Gm Ls Engines, The 26925 Dual Spring Increases The Maximum Valve Lift Of Ls Engines To 0.660"..
Gm Lt1 - The 26925 Dual Spring Drops Onto Gen 2 Lt1/Lt4 Engines Without Any Issue. Adding Significantly To The Valve Lift Capacity Of The Lt1, The 26925 Is The Best Way To Prep Your Lt1 For A High Lift Cam Swap..
More Stability - Higher Lift Cams Are A Common Choice For Street/Strip Engine Builds. Comp's Race Street Line Accomodates Engine Builds That See Both Street And Track Use, Greatly Enhancing Performance At Higher Rpm And Valve Lift..
Features
- Race Ready - The COMP Cams Race Street spring line is designed to accommodate race-oriented hydraulic flat and roller camshafts.
- More Stability - Higher lift cams are a common choice for street/strip engine builds. COMP's Race Street line accomodates engine builds that see both street and track use, greatly enhancing performance at higher RPM and valve lift.
- Modern Performance + Vintage Iron - COMP's Race Street Springs are available in installed heights from 1.640 - 2.000 and . O.D.'s from 1.101 to 1.590, making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads.
- GM LT1 - The 26925 Dual Spring drops onto GEN 2 LT1/LT4 engines without any issue. Adding significantly to the valve lift capacity of the LT1, the 26925 is the best way to prep your LT1 for a high lift cam swap.
- GM GEN III/IV LS - A drop-in dual spring solution for GM LS engines, the 26925 Dual Spring increases the maximum valve lift of LS engines to 0.660.
- See more on Amazon...
First Available: 08/31/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.50 x 10.20 x 2.90 inches | Weight: 3.24 Pounds
Warranty: 1 Year Limited
See On Amazon #11
COMP Cams 26926-16 Race Street 1.320" OD Dual Springs; 1.835" Installed Height; 16 Springs
Asin: B003HGQURG | Model: 26926-16 | PartNumber: 26926-16 | Ean: 0036584200918 | UPC: 036584200918
Modern Performance + Vintage Iron - Comp's Race Street Springs Are Available In Installed Heights From 1.640" - 2.000" And . O.D.'S From 1.101" To 1.590", Making Them Ideal For A Wide Range Of Modern Heads And Oe Iron Heads. Just Match Your Spring Pocket Measurements To The Appropriate Spring Base Od, Then Check The Spring Max Lift Against Your Valve Lift To Ensure A Good Spring For Your Heads..
Chevrolet Small Block - Like The Ford 351W, The Chevrolet Gen 1 Small Block Is A Great Candidate For The 26926 Dual Spring. Ideal For Use On Our More Aggressive Hydraulic Roller Lobe Profiles, Stability, Valve Control And Valve Lift Capacity Are All Increased With A Set Of 26926 Springs..
Ford 351W - Ford 351 Windsors Benefit Significantly From The Increased Spring Pressure And Lift Capacity Of The 26925 Dual Spring. Ideal For Use In High Lift And High Rpm Engines, The 26926 Increases Rpm Range And Overall Valvetrain Stability..
More Stability - Higher Lift Cams Are A Common Choice For Street/Strip Engine Builds. Comp's Race Street Line Accomodates Engine Builds That See Both Street And Track Use, Greatly Enhancing Performance At Higher Rpm And Valve Lift..
Features
- Race Ready - The COMP Cams Race Street spring line is designed to accommodate race-oriented hydraulic flat and roller camshafts.
- More Stability - Higher lift cams are a common choice for street/strip engine builds. COMP's Race Street line accomodates engine builds that see both street and track use, greatly enhancing performance at higher RPM and valve lift.
- Modern Performance + Vintage Iron - COMP's Race Street Springs are available in installed heights from 1.640 - 2.000 and . O.D.'s from 1.101 to 1.590, making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads.
- Ford 351W - Ford 351 Windsors benefit significantly from the increased spring pressure and lift capacity of the 26925 Dual Spring. Ideal for use in high lift and high RPM engines, the 26926 increases RPM range and overall valvetrain stability.
- Chevrolet Small Block - Like the Ford 351W, the Chevrolet GEN 1 Small Block is a great candidate for the 26926 Dual Spring. Ideal for use on our more aggressive hydraulic roller lobe profiles, stability, valve control and valve lift capacity are all increased with a set of 26926 springs.
- See more on Amazon...
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 6.30 x 3.15 x 1.97 inches | Weight: 4.32 Pounds
Warranty: Limited 1 Year
See On Amazon #12
Comp Cams 35-421-8 Xtreme Energy 218/224 Hydraulic Roller Cam for Ford 351W
Asin: B000P599OI | Model: 35-421-8 | PartNumber: 35-421-8 | Ean: 0036584082095 | UPC: 036584082095
218/224 Duration At .050". 110 Degree Lobe Separation Angle.
Excellent Performance In Street Carbureted Applications..
.513"/.513" Valve Lift.
1,500-5,500 Rpm Operating Range.
Features
- Good mid-range performance, 3.23+ gears, stock converter or 1800+ stall. Noticeable idle.
- 1,500-5,500 RPM Operating Range
- 218/224 Duration at .050. 110 Degree Lobe Separation Angle
- .513/.513 Valve Lift
- Excellent performance in street carbureted applications.
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.59 x 14.01 x 2.91 inches | Weight: 7.80 Pounds
See On Amazon #13
COMP Cams 84-123-6 High Energy 214/214 Solid Cam for Nissan 2400-2800cc 6 Cylinder
Asin: B005H89VY6 | Model: 84-123-6 | PartNumber: 84-123-6 | Ean: 0036584191261 | UPC: 036584191261
214/214 Duration At .050". 110 Degree Lobe Separation Angle..
Fits '70-'84 Nissan 2400-2800 6 Cylinder.
Made In Usa.
High Energy Grinds Are A Good Blend Of Efficiency And Performance: Ideal For Performance Street Rebuilds..
Works Well With Mainly Stock Components Such As Rockers, Manifolds, Heads, Compression, Torque Converters And Gears..
0.420"/0.420" Valve Lift.
1,000-5,000 Rpm Operating Range.
Features
- Street performance use. Smooth idle. Wide powerband.
- 1,000-5,000 RPM Operating Range
- 214/214 Duration at .050. 110 Degree Lobe Separation Angle.
- 0.420/0.420 Valve Lift
- High Energy grinds are a good blend of efficiency and performance: ideal for performance street rebuilds.
- Works well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
- Fits '70-'84 Nissan 2400-2800 6 Cylinder
- Made in USA
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.70 x 29.70 x 3.10 inches | Weight: 8.45 pounds
See On Amazon #14
Comp Cams 87-119-6 High Energy 214/214 Solid Cam for Toyota 20R/22R 4 Cylinder
Asin: B0052FO4UA | Model: 87-119-6 | PartNumber: 87-119-6 | Ean: 0036584191315 | UPC: 036584191315
214/214 Duration At .050". 110 Degree Lobe Separation Angle..
High Energy Grinds Are A Good Blend Of Efficiency And Performance: Ideal For Performance Street Rebuilds..
Fit Type: Vehicle Specific.
0.420"/0.420" Valve Lift.
800-4,500 Rpm Operating Range.
Features
- Smooth torque and economy. Best cam to replace OEM grind. Very smooth idle.
- 800-4,500 RPM Operating Range
- 214/214 Duration at .050. 110 Degree Lobe Separation Angle.
- 0.420/0.420 Valve Lift
- High Energy grinds are a good blend of efficiency and performance: ideal for performance street rebuilds.
- Fit type: Vehicle Specific
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.70 x 24.20 x 3.00 inches | Weight: 6.60 Pounds
See On Amazon #15
COMP Cams 79-135-6 Camshaft (N4 292S)
Asin: B005H89WDG | Model: 79-135-6 | PartNumber: 79-135-6 | Ean: 0036584191094 | UPC: 036584191094
Great Performance.
Enhance Your Vehicle.
Backed By Manufacturer's Warranty.
Features
- Competition Cams a trusted industry leader
- Backed by manufacturer's Warranty
- Great Performance
- Enhance your vehicle
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 6.45 Pounds
See On Amazon #16
COMP Cams 7819-1 High Energy 5/16" Diameter 6.400" Length Pushrod for Ford Small Block 302 Engine with Retro-Fit Hydraulic Roller Cam
Asin: B001R98FJG | Model: 7819-1 | PartNumber: 7819-1 | Ean: 0036584401414 | UPC: 036584401414
Best Choice When Building Street Rods, Rvs Or Daily Drivers.
Mate Perfectly With High Energy And Magnum Rockers.
Meet Or Exceed All Oe Pushrod Specifications.
High Energy Pushrod For Small Block Ford 302 With Retro-Fit Hydraulic Roller Cam.
Features
- 5/16 inch diameter; 6.400 inch length
- High Energy Pushrod for Small Block Ford 302 with Retro-Fit Hydraulic Roller Cam
- Best choice when building street rods, RVs or daily drivers
- Meet or exceed all OE pushrod specifications
- Mate perfectly with High Energy and Magnum Rockers
- See more on Amazon...
First Available: 08/24/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 0.10 x 10.00 x 3.00 Inches | Weight: 0.09 Pounds
Warranty: 1 Year Limited
See On Amazon #17
COMP Cams 26921-16 Race Street 1.320" OD Dual Springs; 1.770" Installed Height; 16 Springs
Asin: B001GBQDR6 | Model: 26921-16 | PartNumber: 26921-16 | Ean: 0036584087441 | UPC: 036584087441
Modern Performance + Vintage Iron - Comp's Race Street Springs Are Available In Installed Heights From 1.640" - 2.000" And . O.D.'S From 1.101" To 1.590", Making Them Ideal For A Wide Range Of Modern Heads And Oe Iron Heads. Just Match Your Spring Pocket Measurements To The Appropriate Spring Base Od, Then Check The Spring Max Lift Against Your Valve Lift To Ensure A Good Spring For Your Heads..
Made In Usa.
Small Footprint, Large Lift - The 26921 Dual Spring Delivers High Spring Rate, Moderate Installed Height, High Lift Capacity And A Small Footprint. At Only 1.320" Od, The 26921 Is Ideal For Smaller Spring Pocket Applications That Need High Valve Lift Capacity..
More Stability - Higher Lift Cams Are A Common Choice For Street/Strip Engine Builds. Comp's Race Street Line Accomodates Engine Builds That See Both Street And Track Use, Greatly Enhancing Performance At Higher Rpm And Valve Lift..
Features
- Race Ready - The COMP Cams Race Street spring line is designed to accommodate race-oriented hydraulic flat and roller camshafts.
- More Stability - Higher lift cams are a common choice for street/strip engine builds. COMP's Race Street line accomodates engine builds that see both street and track use, greatly enhancing performance at higher RPM and valve lift.
- Modern Performance + Vintage Iron - COMP's Race Street Springs are available in installed heights from 1.640 - 2.000 and . O.D.'s from 1.101 to 1.590, making them ideal for a wide range of modern heads and OE iron heads. Just match your spring pocket measurements to the appropriate spring base OD, then check the spring max lift against your valve lift to ensure a good spring for your heads.
- Small Footprint, Large Lift - The 26921 Dual Spring delivers high spring rate, moderate installed height, high lift capacity and a small footprint. At only 1.320 OD, the 26921 is ideal for smaller spring pocket applications that need high valve lift capacity.
- Made in USA
- See more on Amazon...
First Available: 09/07/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 6.30 x 2.76 x 1.97 inches | Weight: 1.00 Pounds
Warranty: limited warranty
See On Amazon #18
COMP Cams 35-772-8 Xtreme Energy 248/254 Solid Roller Cam for Ford 351W
Asin: B000V9GBRQ | Model: 35-772-8 | PartNumber: 35-772-8 | Ean: 0036584058960 | UPC: 036584058960
248/254 Duration At .050". 110 Degree Lobe Separation Angle.
Made In Usa.
Quicker Opening Lobe Profiles Deliver Increased Responsiveness And More Area Under The Lift Curve..
Best Performance With Aftermarket Intake Manifolds, Headers And Lower Gear Ratios..
Excellent Performance In Street Carbureted Applications..
More Vacuum Allows An Increase In Duration For Improved Performance And Assists Power Brakes..
.614"/.621" Valve Lift.
Fits Ford 351 Windsor.
3,000-7000 Rpm Operating Range.
Features
- Good in weekend warrior with 3000+ stall. Needs aftermarket intake and exhaust with low gears.
- 3,000-7000 RPM Operating Range
- 248/254 Duration at .050. 110 Degree Lobe Separation Angle
- .614/.621 Valve Lift
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers and lower gear ratios.
- Fits Ford 351 Windsor
- Made in USA
- See more on Amazon...
First Available: 11/26/2016
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.70 x 24.10 x 2.90 inches | Weight: 9.46 Pounds
See On Amazon #19
COMP Cams 1266-12 High Energy Rocker Set w/ 1.6 Ratio for '67-'78 Ford 240-300 w/ 3/8" Stud
Asin: B00062YDYQ | Model: 1266-12 | PartNumber: 1266-12 | Ean: 0036584320548 | UPC: 036584320548
Feature A Long Slot For Higher Than Stock Lift Camshafts.
For Ford 6 Cylinder 240-300.
Solid Bar, One-Piece Design Ties Studs Together And Properly Locates Them.
Features
- Excellent replacement rocker arms for engine rebuilds with a stock or high energy camshaft
- Solid bar, one-piece design ties studs together and properly locates them
- Feature a long slot for higher than stock lift camshafts
- For ford 6 cylinder 240-300
- See more on Amazon...
First Available: 09/05/2012
Brand: Comp Cams | Manufacturer: COMP Cams
Dimensions: 2.20 x 10.30 x 5.30 inches | Weight: 4.26 Pounds
Warranty: 1 Year Limited
See On Amazon
Looking For Something Else?
Search