OTC 6084 Pitman Arm Adjusting Tool
Asin: B000OQKJBA | Model: 6084 | PartNumber: 6084 | Ean: 0731413033483 | UPC: 731413033483
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Weight 7 Oz..
Used To Adjusts Pitman Arms On Heavy-Duty 3/4 And 1-Ton Trucks With 1-7/16" Diameter Adjusting Sleeves.
Features
- Accommodates 1/2" drive ratchet or breaker bar
- Used to adjusts pitman arms on heavy-duty 3/4 and 1-ton trucks with 1-7/16 diameter adjusting sleeves
- Weight 7 oz.
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 6.70 x 4.20 x 0.80 inches | Weight: 0.50 pounds
Warranty: Limited lifetime warranty
See On Amazon Similar To OTC 6084 Pitman Arm Adjusting
#1
OTC 6007 Lower Control Arm Prying Tool
Asin: B000R5BLW4 | Model: 6007 | PartNumber: 6007 | Ean: 0799621068192, 0731413031755 | UPC: 799621068192, 731413031755
Brand: OTC | Manufacturer: OTC
Dimensions: 0.60 x 11.00 x 5.40 inches | Weight: 0.00 Pounds
Warranty: 1 year manufacturer
See On Amazon #2
OTC Puller Set, Bar, 5 Ton, 13 Pieces
Asin: B0002SR47M | Model: 4518 | PartNumber: 4518 | Ean: 0080850302127, 0731413039478, 0069060357172 | UPC: 080850302127, 069060357172, 731413039478
5 Inch Bar-Type Puller Head With Forcing Screw.
Blow-Molded Plastic Storage Case Keeps Set Contents Organized And Protected From Loss.
The 5 Inch Puller Cross-Bar With A 6-1/4 Inch Forcing Screw And Each Of The Bearing Separators May Be Used Separately Or In Combination With Other Pullers Or Tools.
Includes The Two Most Popular Bearing Splitters - 2 Inch And 3 Inch - Plus Four Sets Of Hex Push Puller Legs.
Features
- Separator tools are used with bar puller and legs for a wide variety of pulling jobs
- Includes the two most popular bearing splitters - 2 inch and 3 inch - plus four sets of hex push puller legs
- 5 inch bar-type puller head with forcing screw
- The 5 inch puller cross-bar with a 6-1/4 inch forcing screw and each of the bearing separators may be used separately or in combination with other pullers or tools
- Blow-molded plastic storage case keeps set contents organized and protected from loss
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 16.00 x 10.10 x 2.90 inches | Weight: 0.01 Pounds
Warranty: 1 Year
See On Amazon #3
OTC 6295 Front End Service Set for Pitman Arms, Ball Joints, and Tie Rods
Asin: B0002SRH7O | Model: OTC 6295 | PartNumber: OTC 6295 | Ean: 0777780969826, 0731413038440, 0736770825917, 0744960607526 | UPC: 731413038440, 777780969826, 744960607526, 736770825917
Includes Two Pitman Arm Pullers For Large Or Small Ball Joint Applications, Two Ball Joint Separators, And Three Different Tie Rod Pullers.
Durable Blow Molded Storage Case Keeps Kit Components Organized And Protected When Not In Use.
Rugged Construction Materials And Robust Design Ensures These Powerful Tools Will Get The Job Done For Years To Come.
Ideal Set For Servicing Pitman Arms, Ball Joints, And Tie Rods On Most Vehicles.
Features
- OTC's Front End Service Set Includes five popular tools
- Ideal set for servicing pitman arms, ball joints, and tie rods on most vehicles
- Includes two pitman arm pullers for large or small ball joint applications, two ball joint separators, and three different tie rod pullers
- Rugged construction materials and robust design ensures these powerful tools will get the job done for years to come
- Durable blow molded storage case keeps kit components organized and protected when not in use
- See more on Amazon...
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 3.70 x 17.50 x 12.40 inches | Weight: 12.30 pounds
See On Amazon #4
OTC (8150) Conical Pitman Arm Puller,Black
Asin: B00061SMS0 | Model: 8150 | PartNumber: 8150 | Ean: 0731413046858 | UPC: 731413046858
Reach Of 2-1/2 Inches.
Conical Design Allows The Puller To Fit Securely On The Pitman Arm.
3/4-16 X 4-3/4 Inch Forcing Screw Provides Enough Power To Remove Stubborn Pitman Arms.
Spread Is 1-1/2 Inch.
Features
- Designed to fit Pitman arms on domestic cars and light trucks
- Spread is 1-1/2 inch
- Reach of 2-1/2 inches
- 3/4-16 x 4-3/4 inch forcing screw provides enough power to remove stubborn Pitman arms
- Conical design allows the puller to fit securely on the Pitman arm
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 3.75 x 7.25 x 2.75 Inches | Weight: 0.50 Pounds
Warranty: Limited lifetime warranty
See On Amazon #5
OTC (522) Large Gear and Pulley Puller
Asin: B000OQKJB0 | Model: 522 | PartNumber: 522 | Ean: 0080850302141, 0013438028683, 0731413005220, 0031113145821 | UPC: 031113145821, 013438028683, 080850302141, 731413005220
Forcing Screw Is 3/4 Inch-16 X 11-5/8 Inches Long.
Similar To Ford D80l-522-A And 303-D025.
Accommodates Any Cap Screw Up To 1/2 Inch Diameter.
Spread From 2 Inches To 7-3/4 Inches; Block Is 8-1/4 Inches Wide.
Features
- With OTC's 522 Large Gear and Pulley Puller you can easily remove a wide range of gears, pulleys or other parts that have tapped holes
- Spread from 2 inches to 7-3/4 inches; block is 8-1/4 inches wide
- Forcing screw is 3/4 inch-16 x 11-5/8 inches long
- Accommodates any cap screw up to 1/2 inch diameter
- Similar to Ford D80L-522-A and 303-D025
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 13.20 x 3.10 x 2.20 inches | Weight: 4.10 pounds
Warranty: LIFETIME
See On Amazon #6
OTC 6024 Crankshaft Positioning Tool for Ford, Black
Asin: B000F5ECRM | Model: 6024 | PartNumber: 6024 | Ean: 0731413032554, 0799621067768 | UPC: 799621067768, 731413032554
Preventing Timing Misalignment On These 'Interference' Design Ford Engines Is Critical As Valves Will Contact Pistons If Timing Chain Is Installed In An Incorrect Position, Resulting In Severe Damage.
Otc Recommends (But Does Not Require) That The No. 6024 Crankshaft Alignment Tool Be Used With Nos. 6009 And 6020 Camshaft Alignment Tools To Safeguard Alignment When Servicing Cams Or Chains.
Simply Install Crankshaft Positioning Tool Over Crankshaft Snout (Aligning Crankshaft Woodruff Key With Keyway On Tool) And Engine Front Cover Alignment Dowel To Correctly Position Crank At Tdc.
Handy Tool Prevents Accidental Movement Of The Crankshaft When Doing Camshaft Or Timing Chain Service Or Installation On These 'Interference' Engines.
Features
- OTC Crankshaft Positioning Tool for use on 1993 and newer Ford 4.2L V6; 4.6L 2 valve and 4.6L 4-valve V8, 5.4L V8, and 6.8L V10 engines - same as Ford No. 303-448
- Handy tool prevents accidental movement of the crankshaft when doing camshaft or timing chain service or installation on these 'interference' engines
- Preventing timing misalignment on these 'interference' design Ford engines is critical as valves will contact pistons if timing chain is installed in an incorrect position, resulting in severe damage
- Simply install crankshaft positioning tool over crankshaft snout (aligning crankshaft woodruff key with keyway on tool) and engine front cover alignment dowel to correctly position crank at TDC
- OTC recommends (but does not require) that the No. 6024 Crankshaft Alignment Tool be used with Nos. 6009 and 6020 Camshaft alignment tools to safeguard alignment when servicing cams or chains
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.50 x 7.75 x 4.25 inches | Weight: 0.70 pounds
Warranty: LIFETIME
See On Amazon #7
OTC Tools 4530 Power Steering Pump Pulley Service Set
Asin: B000XSI96G | Model: 4530 | PartNumber: 4530 | Ean: 0731413039416, 0777780969703, 0073141303941 | UPC: 073141303941, 731413039416, 777780969703
A Complete Set Of Tools Required To Remove And Install Power Steering Pump Pulleys Of Most Domestic Vehicles. Fits Pulley Hubs With Diameters Of 1-1/8", 1-1/4", 1-5/16" And 1-3/8". Includes The Necessary Adapters For Servicing: Gm 3.1 L, 3100, 3400, And 3800 V6 Engines, Gm 2.3L Quad 4 Four-Cylinder Engines And Ford 4.6L, 5.4L, And 5.8L Modular V8 Engines. Housed In A Blow-Molded Storage Case To Protect And Organize Components..
Features
- AUTO_ACCESSORY
- A complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles. Fits pulley hubs with diameters of 1-1/8, 1-1/4, 1-5/16 and 1-3/8. Includes the necessary adapters for servicing: GM 3.1 L, 3100, 3400, and 3800 V6 engines, GM 2.3L Quad 4 four-cylinder engines and Ford 4.6L, 5.4L, and 5.8L modular V8 engines. Housed in a blow-molded storage case to protect and organize components.
- See more on Amazon...
First Available: 11/14/2007
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 1.60 x 7.30 x 9.20 inches | Weight: 2.00 pounds
Warranty: One (1) year limited warranty
See On Amazon #8
OTC 7249 Ball Joint, U-Joint, and Brake Anchor Pin Service Kit with Storage Case , Gray
Asin: B0002SRGXY | Model: 7249 | PartNumber: 7249 | Ean: 0731413000935, 0013588023316 | UPC: 013588023316, 731413000935
Contains 3 Receiver Tubes - 2-3/4 Inch Id X 3 Inch Od, 2-1/4 Inch Id X 2-1/2 Inch Od, And 1-3/4 Inch Id X 2 Inch Od.
Sturdy Blow Molded Hard Case Keeps Contents Protected And Secure When Not In Use.
Includes 1 Each; Installing Cup, Receiving Cup, And Installing Adapter.
Clamp Frame Features Heavy Duty Materials And Construction To Prevent Distortion In Severe Use Cases.
Features
- OTC's Ball Joint, U-Joint, and Brake Anchor Pin Service Kit removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins.Fit Type: Universal
- Clamp frame features heavy duty materials and construction to prevent distortion in severe use cases
- Contains 3 receiver tubes - 2-3/4 inch ID x 3 inch OD, 2-1/4 inch ID x 2-1/2 inch OD, and 1-3/4 inch ID x 2 inch OD
- Includes 1 each; installing cup, receiving cup, and installing adapter
- Sturdy blow molded hard case keeps contents protected and secure when not in use
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 5.70 x 16.20 x 16.00 inches | Weight: 0.02 Pounds
Warranty: LIFETIME
See On Amazon #9
OTC 5052 S-Cam Brake Slack Adjuster Tool
Asin: B000O82538 | Model: 5052 | PartNumber: 5052 | Ean: 0731413005107 | UPC: 731413005107
Features A Sturdy Four-Position Handle To Provide The Leverage You Need At The Proper Angle.
Crafted From High-Grade Materials To Ensure Quality Performance Over The Lifetime Of The Tool.
Works On Manual Or Automatic Slack Adjusters.
Enables You To Quickly Check The Brake Adjustment On Class 7 Or 8 Trucks And Trailers Equipped With S-Cam Brakes.
Features
- OTC S-Cam Brake Slack Adjuster Tool
- Enables you to quickly check the brake adjustment on class 7 or 8 trucks and trailers equipped with S-cam brakes
- Features a sturdy four-position handle to provide the leverage you need at the proper angle
- Works on manual or automatic slack adjusters
- Crafted from high-grade materials to ensure quality performance over the lifetime of the tool
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 8.00 x 12.00 x 1.00 inches | Weight: 1.20 pounds
Warranty: Limited lifetime warranty
See On Amazon #10
OTC 7080 Ball Joint Spanner Wrench
Asin: B0002SRDEG | Model: 7080 | PartNumber: 7080 | Ean: 0731413000713 | UPC: 731413000713
Country Of Manufacture: United States.
Part Number: 7080.
Auto & Truck Maintenance.
Features
- Manufacturer: OTC
- Auto & Truck Maintenance
- Country of manufacture: United States
- Part number: 7080
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 7.50 x 4.80 x 1.40 inches | Weight: 0.20 pounds
Warranty: 1 year manufacturer
See On Amazon
Looking For Something Else?
Search