Colder Quick Disconnects for Beer Line, Male & 1 Female, Set of 1
Asin: B002W7XPCY | Model: QDAIR | PartNumber: QDAIR | Ean: 0845033090532 | UPC: 845033090532
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Made Of Plastic With Stainless Steel Springs And Nsf Approved.
Easy To Use.
Shutoffs Prevent Leakage When Disconnected.
These Couplings Make It Very Easy To Swap Out Couplers And Other Beer And Air Side Accessories.
Features
- Use with vinyl tubing
- These couplings make it very easy to swap out couplers and other beer and air side accessories
- Made of plastic with stainless steel springs and NSF approved
- Shutoffs prevent leakage when disconnected
- Easy to use
- See more on Amazon...
Brand: Colder | Manufacturer: CE
Dimensions: 4.00 x 4.00 x 4.00 inches | Weight: 0.10 Pounds
See On Amazon Similar To Colder Quick Disconnects for Beer
#1
Bev Rite CPCCM181 Connector Kit For Beer Line
Asin: B00829HLUS | Model: CPCCM181 | PartNumber: CPCCM181 | Ean: 0741459037017 | UPC: 741459037017
Fits 3/16'' Tubing.
High Quality Parts.
One Set For Each Conneciton Being Made.
Connectors For Beer Lines.
Features
- Includes hex nut, tail piece, washer and clamp.
- Connectors for beer lines
- Fits 3/16'' tubing
- One set for each conneciton being made
- High quality parts
- See more on Amazon...
Brand: Draft Warehouse | Manufacturer: Chill Passion Inc.
Dimensions: 0.50 x 1.00 x 0.50 Inches | Weight: 0.05 Pounds
See On Amazon #2
FERRODAY Stainless Steel Quick Disconnect Set 1/2 NPT Female Disconnect 1/2" Barb Brewing Quick Disconnect For Wort Pumps for Wort Chiller Connectors for Ball Valve Hose Fitting & O-rings
Asin: B091C4WGGW
【Push-On Hose Fittings 】Firstly You Need To Pull Up The Collar On The Barbed Quick Disconnect, Then Put The Female Fitting Into The Barbed Quick Disconnect, And Then Release The Collar To Lock..
【Connection Easily】This Quick Disconnect Set Allows One Hand Operation Of Take On/ Take Off. All Parts Fit Together Very Well . The Fpt Quick Disconnect Works Perfect For Homebrew Quick Disconnect Setup..
【No Leaks】The Barbed Quick Disconnect Has A Red Silicone Gasket Inside. It Will Create A Tight Seal For Liquid & Gas Between Fpt Fitting And The Barbed Quick Disconnect..
【Quickly Switch Lines Between Equipment】 1/2 Npt Thread Quick Disconnect Can Attach To Any 1/2 Male Thread Fitting（Ball Valve, Wort Chillers, Beer Pump). The 1/2" Od Barbed Hose Fittings Is Great For Attaching 1/2" Id Hose..
Features
- 304 Stainless Steel The FPT quick disconnect is made of top quality 304SS that will last a lifetime. The internal o-ring is food grade silicone. Our female quick disconnect is anti-corrosion/ heat-resistant and wear-resistant.
- Quickly Switch Lines Between Equipment 1/2 NPT thread quick disconnect can attach to any 1/2 male thread fitting ball valve, wort chillers, beer pump). The 1/2 OD barbed hose fittings is great for attaching 1/2 ID hose.
- Push-On Hose Fittings Firstly you need to pull up the collar on the barbed quick disconnect, then put the Female fitting into the barbed quick disconnect, and then release the collar to lock.
- No Leaks The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between FPT fitting and the barbed quick disconnect.
- Connection Easily This quick disconnect set allows one hand operation of take on/ take off. All parts fit together very well . The FPT quick disconnect works perfect for homebrew quick disconnect setup.
- See more on Amazon...
Brand: Ferroday | Manufacturer: FERRODAY
Weight: 0.10 pounds
See On Amazon #3
BBTUS 1/4" 3/8" 5/16" Plastic Hose Barb In-Line Quick Connector, Quick Release Vacuum Disconnect Coupling, Shut-Off Valved Insert Tube Quick Connect Fittings (1 Male+ 1 Female)(3/8")
Asin: B0B1HL4PD4 | Model: GYJT2214 | PartNumber: GYJT2214
When The Male Coupling And The Female Coupling Are Locked Together By The Snap Ring, The Pipeline Can Be Formed Into A Passage In An Instant; When The Snap Ring Is Released, The Male Coupling And The Female Coupling Are Automatically Separated, Both Ends Of The Pipe Are Closed Instantly..
Suitable For A Wide Variety Area. Such As Beer Brewing/Co₂ And O₂ Gas Line/ Fuel Line/Homefill Compressor /Floating Dip Tube/.
The Temperature Range Is -40F To 180F.They Can Handle A Vacuum To 120 Psi. There Will Be No Leakage Or Air After It Is Disconnected. So You Need Not Worry About Them Leaking Gas..
When The Male Coupling And The Female Coupling Are Independent In A Piping System, Either Of Them Has A Shut-Off Valve Function To Prevent Liquid Or Gas Leakage And Flowback..
Features
- The product has one pairs, one male and one female connectors. Please use them together.
- When the male coupling and the female coupling are independent in a piping system, either of them has a shut-off valve function to prevent liquid or gas leakage and flowback.
- When the male coupling and the female coupling are locked together by the snap ring, the pipeline can be formed into a passage in an instant; when the snap ring is released, the male coupling and the female coupling are automatically separated, both ends of the pipe are closed instantly.
- The temperature range is -40F to 180F.They can handle a vacuum to 120 psi. There will be no leakage or air after it is disconnected. So you need not worry about them leaking gas.
- Suitable for a wide variety area. Such as Beer brewing/CO and O gas line/ Fuel Line/Homefill compressor /floating dip tube/
- See more on Amazon...
Brand: BBTUS | Manufacturer: BBTUS
Dimensions: 3.30 x 0.74 x 0.94 inches
Warranty: One Year Warranty
See On Amazon #4
Plastic Hose Quick Connector with Shut-Off,Gas and Liquid Quick Connector check valve Beer Line Tubing Quick Disconnect (1/4 Barb)
Asin: B094FGVJSF
These Couplings Make It Very Easy To Swap Out Couplers And Other Beer And Air Side Accessories..
The Temperature Range Is -40F To 180F.They Can Handle A Vacuum To 80 Psi - So You Need Not Worry About Them Leaking Gas..
Made Of Food-Grade Plastic With Stainless Steel Springs And Nsf Approved..
Shutoffs(Check Valve) Prevent Leakage When Disconnected.Use These High Quality, Food-Grade Quick-Disconnects On Your Gas And Beer Tubing Lines..
Features
- This plastic quick disconnect set features 1/4" barb.
- Shutoffs(check valve) prevent leakage when disconnected.Use these high quality, food-grade quick-disconnects on your gas and beer tubing lines.
- These couplings make it very easy to swap out couplers and other beer and air side accessories.
- Made of Food-grade plastic with stainless steel springs and NSF approved.
- The temperature range is -40F to 180F.They can handle a vacuum to 80 psi - so you need not worry about them leaking gas.
- See more on Amazon...
Brand: LucaSng | Manufacturer: LucaSng
See On Amazon #5
PERA 2 Pair Ball Lock keg couplers Barb Gas&Liquid Beer Quick Disconnects Sets Black for Liquid,2 PCS Gray for Gas
Asin: B0744BWCVH | Model: 8541955829 | PartNumber: 8541955829 | Ean: 0698545300497 | UPC: 698545300497
Ball Lock Liquid Disconnect, Black Colour, Fits 3/16" Id Gas Line;.
Quick Disconnect Usually Connect For Cornelius Ball Lock Keg;.
Ball Lock Gas Disconnect, Grey Colour, Fits 3/16" Id Beer Line;.
Features
- Ball lock disconnects Barb, pbt material for the body, stainless steel material for Barb;
- Ball lock gas disconnect, Grey colour, fits 3/16 Id beer line;
- Ball lock liquid disconnect, black colour, fits 3/16 Id Gas line;
- Quick Disconnect usually connect for Cornelius ball lock keg;
- See more on Amazon...
Brand: Beverage Factory | Manufacturer: PERA
Dimensions: 1.57 x 5.12 x 3.54 inches
See On Amazon #6
DERNORD 2 Pack Barb Female Stainless Steel Quick Disconnect - Home Brewing Connector (1/2 Barb)
Asin: B08HMMHFW1 | Model: DERNORD-1030 | PartNumber: DERNORD-1030
More Convenient:Anti-Skid Design, Installation And Disassembly More Easily And Flexibly, Barbed Retracting Locks For Easy Slide-Back ,Connecting And Disconnecting Just In One Second.
No Leak: The Barbed Quick Disconnect Has A Red High Temperature O-Ring Inside. It Will Create Liquid & Gas Tight Seals..
Easy To Clean: With These Quick Disconnects, You Can Quickly Remove The Tubing And Submerge In Sanitizer When Not In Use..
High Quality: Made Of Food Grade Heavy Duty 304 Stainless Steel, Last For Long Lifetime And Resistant To Corrosion ..
Features
- SIZE: Female QD X 1/2 Barb
- HIGH QUALITY: Made of food grade heavy duty 304 stainless steel, last for long lifetime and resistant to corrosion .
- MORE CONVENIENT:Anti-skid design, Installation and disassembly more easily and flexibly, Barbed retracting locks for easy slide-back ,Connecting and Disconnecting just in one second
- Easy TO CLEAN: With these quick disconnects, you can quickly remove the tubing and submerge in sanitizer when not in use.
- No Leak: The barbed quick disconnect has a red high temperature O-ring inside. It will create liquid & gas tight seals.
- See more on Amazon...
Brand: DERNORD | Manufacturer: DERNORD
See On Amazon #7
PERA Corny Keg Quick Disconnect Ball Lock Disconnect Set with Stainless Steel Swivel Nut for Home Brewing Beer Keg System (PACK OF 8)
Asin: B0854899YH | Ean: 0653854601505 | UPC: 653854601505
3.Use: The Ball Lock Gray Disconnect Connect 5/16 Swivel Nut And Usually Connect 5/16 Red Gas Line, The Ball Lock Liquid Disconnect Connect 1/4 Swivel Nut And Usually Connect 3/16 Beer Line;.
5.Quality Guarantee, Money Return Or Replacement..
4.Connect: The Ball Lock Disconnect Mfl With Barbed Swivel Nut Makes It Easy To Screw And Unscrew Your Tubing From The Fitting For Cleaning;.
2.Material: Pbt Material For Ball Lock Quick Disconnect And Stainless Steel Material For Swivel Nut;.
Features
- 1.Include: Ball Lock Cornelius Keg MFL Disconnects Gas & Liquid, 1/4 and 5/16 Swivel Nuts;
- 2.Material: PBT Material for Ball Lock Quick Disconnect and Stainless Steel Material for Swivel Nut;
- 3.Use: The Ball Lock Gray Disconnect connect 5/16 Swivel Nut and usually Connect 5/16 Red Gas Line, The Ball Lock Liquid Disconnect Connect 1/4 Swivel Nut and usually Connect 3/16 Beer Line;
- 4.Connect: The Ball Lock Disconnect MFL with Barbed Swivel Nut makes it easy to screw and unscrew your tubing from the fitting for cleaning;
- 5.Quality Guarantee, Money Return or Replacement.
- See more on Amazon...
Brand: PERA
Dimensions: 2.00 x 8.00 x 8.00 Inches
See On Amazon #8
DERNORD Stainless Steel Female Quick Disconnect FPT 1/2" Homebrewing Connector Sanitary Fitting Pack of 2
Asin: B07KG557NK
Brewing Tool: Holds Pressure For Brewing Applications When Moving Liquids At 60Psi Or Less, Perfect For Home Brewing.
Various Usage:Connector Can Be Combinated To Suit For Your Use Such As Pumps,Ball Valves,Wort Chillers And Any Other Machine Need 1/2 Female Threaded To Connect.
High Quality:They Are Made Of Heavy Duty Ss304 , Durable Stainless Construction Is Long-Lasting And Resistant To Corrosion.
2- Pack Food Grade Ss304 Female Quick Disconnect.
Features
- 1/2 Inch Quick Disconnect Female Threaded NPT
- 2- Pack Food Grade SS304 Female Quick Disconnect
- Brewing Tool: Holds pressure for brewing applications when moving liquids at 60Psi or less, perfect for home brewing
- High Quality:They are made of heavy duty SS304 , durable stainless construction is long-lasting and resistant to corrosion
- Various Usage:Connector can be combinated to suit for your use such as pumps,ball valves,wort chillers and any other machine need 1/2 female threaded to connect
- See more on Amazon...
Brand: DERNORD | Manufacturer: DERNORD
Weight: 0.00 pounds
See On Amazon #9
HGKEKE Stainless Steel Quick Disconnect Set for Homebrew 1/2 Male MPT Connector Homebrew Beer Brewing Connector Set - 1/2 Barb Female & MPT Male - 2 Pack
Asin: B0CRHPFB4N
【Easy To Use】Just Press The Collar Of The 1/2" Barb Female Quick Disconnect, And Put The 1/2 Male Connector Fitting Into The Barb Fitting, Then Release The Collar To Lock The Kit. Simply Take A Second For Connecting And Disconnecting!.
【Lifetime Service】Hgkeke 1/2" Barb Female Quick Disconnect And 1/2 Male Mpt Quick Disconnectors Are Well Packaged And Scratch-Free. Please Let Us Know If You Encounter Any Problems And Get A Satisfactory Solution Within 24 Hours Or Less!.
【No Leaks】 The Barbed Quick Disconnect Has A Red Silicone Gasket Inside. It Will Create A Tight Seal For Liquid & Gas Between The 1/2 Male Stainless Quick Disconnect Fitting And The Barbed Quick Disconnect..
【Versatile】1/2Npt Female Thread Quick Disconnect Suitable For Plate Chillers And Wort Pumps.
Features
- ALL 304 STAINLESS STEEL All stainless steel 1/2" barb female and 1/2" MPT male quick disconnect connectors , wear-resistant , rustproof durable fitting for long-lasting service. Stainless steel fitting is also high pressure resistant and high impact resistant. The internal o-ring of the 1/2"barb quick connect is made of food-grade silicone.
- VERSATILE 1/2NPT female thread quick disconnect Suitable for plate chillers and wort pumps
- EASY TO USE Just press the collar of the 1/2 barb female quick disconnect, and put the 1/2 male connector fitting into the barb fitting, then release the collar to lock the kit. Simply Take a Second for Connecting and Disconnecting!
- NO LEAKS The barbed quick disconnect has a red silicone gasket inside. It will create a tight seal for liquid & gas between the 1/2 male stainless quick disconnect fitting and the barbed quick disconnect.
- LIFETIME SERVICE Hgkeke 1/2 barb female quick disconnect and 1/2 male MPT quick disconnectors are well packaged and scratch-free. Please let us know if you encounter any problems and get a satisfactory solution within 24 hours or less!
- See more on Amazon...
Brand: Hgkeke
See On Amazon #10
BBTUS 2PCS 1/4" 3/8" 5/16" Plastic Hose Barb Valved In-Line Coupling Insert Quick Connector, Quick Shut-Off Hose Joint Tube Connector, Male Quick Connect Fittings (2x Male Connector) (1/4")
Asin: B0B1LV6FZK
When The Male Coupling And The Female Coupling Are Locked Together By The Snap Ring, The Pipeline Can Be Formed Into A Passage In An Instant; When The Snap Ring Is Released, The Male Coupling And The Female Coupling Are Automatically Separated, Both Ends Of The Pipe Are Closed Instantly..
Suitable For A Wide Variety Area. Such As Beer Brewing/Co₂ And O₂ Gas Line/ Fuel Line/Homefill Compressor /Floating Dip Tube/.
The Temperature Range Is -40F To 180F.They Can Handle A Vacuum To 120 Psi. There Will Be No Leakage Or Air After It Is Disconnected. So, You Need Not Worry About Them Leaking Gas..
When The Male Coupling And The Female Coupling Are Independent In A Piping System, Either Of Them Has A Shut-Off Valve Function To Prevent Liquid Or Gas Leakage And Flowback..
Features
- The quick coupling needs to be used together with a male connector and a female connector! Therefore, you have to purchase a male connector and a female connector at the same time. In addition, if the male connector built-in a check valve, you have to purchase a female connector which also built-in a check valve.
- When the male coupling and the female coupling are independent in a piping system, either of them has a shut-off valve function to prevent liquid or gas leakage and flowback.
- When the male coupling and the female coupling are locked together by the snap ring, the pipeline can be formed into a passage in an instant; when the snap ring is released, the male coupling and the female coupling are automatically separated, both ends of the pipe are closed instantly.
- The temperature range is -40F to 180F.They can handle a vacuum to 120 psi. There will be no leakage or air after it is disconnected. So, you need not worry about them leaking gas.
- Suitable for a wide variety area. Such as Beer brewing/CO and O gas line/ Fuel Line/Homefill compressor /floating dip tube/
- See more on Amazon...
Brand: BBTUS | Manufacturer: BBTUS
Dimensions: 0.67 x 2.01 x 0.63 inches
Warranty: One Year Warranty
See On Amazon #11
BBTUS 2Pcs 1/8" 3/16" 1/4" 1/8" 90 Degree Elbow Plastic Tube in-line Hose Quick Connector Disconnect Hose Barb insert Fittings with Shut-Off Valved in Quick Release Coupling(2 Male+ 2 Female) (1/4")
Asin: B0CJLWF624 | Model: GYJT2219 GYJT2220 GYJT2221 | PartNumber: GYJT2219 GYJT2220 GYJT2221
Features
- Material of Body is High quality POM (polyoxymethylene). Compared with the other material, POM has good solvent resistance, oil resistance, weak acid resistance, weak alkali resistance, and also has high hardness and rigidity. Also, POM material is non-toxic. You may use it in many areas.
- See more on Amazon...
Brand: BBTUS | Manufacturer: BBTUS
Dimensions: 2.99 x 0.74 x 0.82 inches
See On Amazon #12
LitKiwi 2PCS Keg Coupler Barb Connector,Stainless Steel 304 Beer Kegerator Sankey Couplers,Hex Nut 5/8"G Thread x 1/4" Barb Beer Line Tailpiece Nipple Fitting with Sealing Gasket Washer
Asin: B09G6XTRFS | Model: AUS010 | PartNumber: AUS010 | Ean: 0770773503816 | UPC: 770773503816
★【Professional Design】The Swivel Nut Make The Installation Easier And Faster,The Elongated Barb Part Allows The Pipe To Be Installed Deeper, And Provides Clamps To Make The Pipe Fully Stable And Not Easy To Fall Off..
★【Package Include】2Pcs 5/8"G X 1/4" Barb Fittings.If You Are Not Fully Satisfied With Our Product, We Will Serve You Whole Heartedly..
★【Wide Application】Use For Most American Beer Keg Coupler,Connect Line To Shanks And Couplers.Also Can Use For Other Scenes Which Need The 5/8"G Thread To 1/4"Barb Fitting..
★【General Size】The Thread—5/8"G(Bsp),Suit For Most American Beer Keg Coupler,The 1/4" Barb Suit For 3/16" Id Beer Tube,It Is Bigger Than The General-Purpose Models On The Market And Can Support Larger Traffic..
Features
- Great Marterial Both the fitting and clamp were made of 304 High quality stainless steel which has high temperature ductility, low magnetic permeability,and low carbon content for greater resistance to corrosion.
- General Size The Thread 5/8G(BSP),suit for most American beer keg coupler,the 1/4 Barb suit for 3/16 ID beer tube,it is bigger than the general-purpose models on the market and can support larger traffic.
- Professional Design The swivel nut make the installation easier and faster,the elongated Barb part allows the pipe to be installed deeper, and provides clamps to make the pipe fully stable and not easy to fall off.
- Wide Application Use for most American beer keg coupler,connect line to shanks and couplers.Also can use for other scenes which need the 5/8G thread to 1/4barb fitting.
- Package Include 2PCS 5/8G x 1/4 Barb fittings.If you are not fully satisfied with our product, we will serve you whole heartedly.
- See more on Amazon...
Brand: LitKiwi | Manufacturer: LitKiwi
Dimensions: 0.59 x 5.91 x 3.54 Inches
See On Amazon #13
Dbgogo 2 Pairs Corny Keg Ball Lock Quick Disconnect Set, Home Brewing Cornelius Keg Parts Ball Lock Keg Fittings with Stainless 5/16'' Gas 1/4'' Beer Barb Swivel Nuts Hose Clamp for Keg Post Coupler
Asin: B0CMCNRV9R
Stainless Steel Barb Fitting, Healthy Plastic Disconnect, Takes Up Less Space: Our Ball Lock Quick Disconnect Kit Is Made Of Plastic And Stainless, Which Is More Sturdy Than Other Plastic Quick Disconnect On The Market, Supports Your Brewing Carbonation Activities For A Long Time, Its Overall Height Is Short, 7/16-20Unf Thread Ball Lock Disconnect Connector Will Not Take Much Space Of Refrigerator When Connecting To Beer Line Barb, Allows For A Better Fit In Small Refrigerator..
Widely Application: Threaded Beer Keg Ball Lock Connector With Swivel Nut Barb Fit Most Household Cornelius Keg And Soda Keg, They Also Fit On Corny Carbonation Keg Lid And Sankey Keg Coupler Adapter. Works On Your Brewing Double Ball Lock Spear, Beer Tap And Mini Regulator, Ideal For Beer, Craft Cocktails, Soda, Juice And Other Beverages Dispensing!.
Easy To Install: You Can Pull Up Collar Of Ball Lock Keg Disconnect, Push It Onto The Keg Double Ball Or Ball Lock Keg Post, Gently Let Go And The Quick Disconnector Will Be Tightly Connected To Your Keg Dispenser. On The Contrary, Pull Up The Collar And Pull The Quick Disconnect Up To Remove. Gas Input End Is Suitable For 5/16'' Barb, Beer Outflow End Is Suitable For 1/4'' Barb, You Can Measure The Inner Diameter Of Your Brewing Beer And Gas Hose Before Purchasing To Avoid Unnecessary Losses..
Good Sealing, 100% Solve Your Problems: Dbgogo Corny Keg Ball Lock Keg Disconnect Come With High Quality Silicone And Rubber Sealing O-Rings, If The Sealing Gasket On Your Ball Lock Post Is Damaged, Please Replace It In Time To Bring You Good Sense Of Use. Homebrew Hose Clamps Are Used To Further Fix And Keep Connection Ends, No Leak..
Features
- Comes with barb swivel nut adapter for convenience and no leaks: Dbgogo corny keg connectors are very easy to distinguish, white is ball lock gas disconnect and black is ball lock liquid disconnect. The kit includes a 5/16'' gas barb nut adapter and a 1/4'' beer barb nut adapter, you can directly connect and use without extra purchase, which is convenient and saves budget. keg ball lock quick disconnect adapter is configured for 4-ball bearings and fit very tightly, effectively preventing leaks.
- Good sealing, 100% solve your problems: Dbgogo corny keg ball lock keg disconnect come with high quality silicone and rubber sealing o-rings, if the sealing gasket on your ball lock post is damaged, please replace it in time to bring you good sense of use. Homebrew hose clamps are used to further fix and keep connection ends, no leak.
- Stainless steel barb fitting, healthy plastic disconnect, takes up less space: our ball lock quick disconnect kit is made of plastic and stainless, which is more sturdy than other plastic quick disconnect on the market, supports your brewing carbonation activities for a long time, its overall height is short, 7/16-20UNF thread ball lock disconnect connector will not take much space of refrigerator when connecting to beer line barb, allows for a better fit in small refrigerator.
- Easy to install: you can pull up collar of ball lock keg disconnect, push it onto the keg double ball or ball lock keg post, gently let go and the quick disconnector will be tightly connected to your keg dispenser. on the contrary, pull up the collar and pull the quick disconnect up to remove. gas input end is suitable for 5/16'' barb, beer outflow end is suitable for 1/4'' barb, you can measure the inner diameter of your brewing beer and gas hose before purchasing to avoid unnecessary losses.
- Widely application: threaded beer keg ball lock connector with swivel nut barb fit most household Cornelius keg and soda keg, they also fit on Corny carbonation keg Lid and sankey keg coupler adapter. works on your brewing double ball lock spear, beer tap and mini regulator, ideal for beer, craft cocktails, soda, juice and other beverages dispensing!
- See more on Amazon...
Brand: Dbgogo
See On Amazon #14
Beer Hex Nut with 90 Tail Piece Elbow Beer Faucet Connector Accessories 5/8" G Threaded and 1/4" Barb used for Beer Brewing Dispenser by LUCKEG
Asin: B09JW2RKYD
Used Place: Hex Nut Kit Is Used For 5/8" G Threaded Various Specifications Keg Couplers And Beer Shank. The Tail Piece Is 1/4" Which Can Used For 3/16" Beer Hose. 90° Tail Piece Elbow Allows The Tubing To Be Installed More Angularly And Smoothly Anywhere. 1/4" Barb Can Connect The Hose More Firmly And Hose Clamps Can Make The Pipe Fully Stable And Not Easy To Cause Leakage Problem..
If You Are Not Fully Satisfied With Beer Keg Hex Nut Kit, Please Feel Free To Contact Us, We'll Help You Solve It Until You Are Satisfied..
Tips: Coupler Connector Washer And 90° Tail Piece Elbow Barb Need To Be Replaced Frequently, So As To Have A Clean Beer Hose Environment And Better Experience. Sometimes The Beer Hose Is Very Hard To Connect, You Can Put The Hose In The Hot Water, Then Connect The Equipment..
Food Grade Material: The Washer Gaskets Are Made Of Food Grade Silicone. It Prevents Leakage Problems And Ensures That You Have Good Experience With Beer Keg Couplers. The Sankey Keg 1/4" Tail Piece Fitting Can Connect Hose Securely. High Quality And Food Grade Keg Coupler Connector Made You Enjoy Your Beer Time..
Features
- Package Include: 2*Beer Keg Coupler Fittings with 90 Tail Piece Elbow, 2*Rubber Washers
- Food Grade Material: The Washer Gaskets are made of Food Grade Silicone. It prevents leakage problems and ensures that you have good experience with Beer Keg Couplers. The Sankey Keg 1/4 Tail Piece Fitting can connect hose securely. High quality and Food grade Keg Coupler Connector made you enjoy your beer time.
- Used Place: Hex Nut Kit is used for 5/8 G Threaded Various specifications Keg Couplers and Beer Shank. The tail piece is 1/4 which can used for 3/16 beer hose. 90 Tail Piece Elbow allows the tubing to be installed more angularly and smoothly anywhere. 1/4 barb can connect the hose more firmly and hose clamps can make the pipe fully stable and not easy to cause leakage problem.
- Tips: Coupler connector washer and 90 tail piece elbow barb need to be replaced frequently, so as to have a clean beer hose environment and better experience. Sometimes the Beer Hose is very hard to connect, you can put the hose in the hot water, then connect the equipment.
- If you are not fully satisfied with Beer Keg Hex Nut Kit, please feel free to contact us, we'll help you solve it until you are satisfied.
- See more on Amazon...
Brand: LUCKEG
See On Amazon #15
ProMaker 2pcs Brewing Stainless Steel 1/2" Barb Male Quick Disconnect Homebrew Fitting Connector Homebrewing
Asin: B07F5S1WNB | Ean: 0742354685327 | UPC: 742354685327
Heavy Duty, High Temperature Rubber O-Ring Inside For Leak-Free Connections.
The Quick Disconnect Will Hold Pressure For Brewing Applications When Moving Liquids At 60Psi Or Less.
Barbed Retracting Locks For Easy Slide-Back Connecting And Disconnecting.
1/2" Male Quick Disconnect On One End, 1/2" Barbed Connection On The Other.
Features
- 304 stainless steel construction
- 1/2 Male Quick Disconnect on one end, 1/2 Barbed Connection on the other
- Heavy duty, high temperature rubber o-ring inside for leak-free connections
- Barbed retracting locks for easy slide-back connecting and disconnecting
- The quick disconnect will hold pressure for brewing applications when moving liquids at 60PSI or less
- See more on Amazon...
Brand: Yihor | Manufacturer: ProMaker
See On Amazon #16
Brewing Beer Stainless Steel Male Quick Disconnect FPT 1/2 inch
Asin: B07D1PDL4Y | Ean: 0658759952790 | UPC: 658759952790
◆Lifelong Use Material Ss304 For Brewing Applications..
◆We Are Manufacturer So Discount Can Be Offered For Bigger Order..
◆Stainless Steel Quick Disconnect - Male Qd X 1/2 Fpt..
◆Used On Your Kettle,Mash-Tun,Pump And Chiller..
Features
- Origin: China
- Used on your kettle,mash-tun,pump and chiller.
- Lifelong use material SS304 for brewing applications.
- Stainless Steel Quick Disconnect - Male QD x 1/2 FPT.
- We are manufacturer so discount can be offered for bigger order.
- See more on Amazon...
Brand: Double4U
Weight: 0.11 pounds
See On Amazon #17
DERNORD Stainless Steel Quick Disconnect Set - Beer Brewing Connector Kit (Barb Female/FPT Male(Pack of 2))
Asin: B07YZ7B4LJ | Model: DERNORD-812 | PartNumber: DERNORD-812
Easy Sanitation: Easy To Install And Disassembled,Quick Disconnect Allow For Easy Sanitizing During Your Brew Day..
High Quality: Heavy Duty Stainless Steel Construction To Look Great And Last A Lifetime, And High Temperature O-Ring Ensures A Tight Seal Every Time..
Save Time: Quick Disconnects Make Setup And Clean Up A Breeze So You Can Get Down To Brewing.
Convenient: Easy Connection To Plate Chillers And Wort Pumps..
Features
- INCLUDES: Two 1/2" barb female and two 1/2" FPT male
- CONVENIENT: Easy connection to plate chillers and wort pumps.
- EASY SANITATION: Easy to install and disassembled,quick disconnect allow for easy sanitizing during your brew day.
- SAVE TIME: Quick disconnects make setup and clean up a breeze so you can get down to brewing
- HIGH QUALITY: Heavy duty stainless steel construction to look great and last a lifetime, and high temperature O-ring ensures a tight seal every time.
- See more on Amazon...
Brand: DERNORD | Manufacturer: DERNORD
See On Amazon #18
LUCKEG Quick Disconnect Beer Faucet Adapter - 2 PCS Standard FFL Adapter Connect Faucet to Beer Keg Quick Disconnect, for Homebrewing Keg Beer Tap
Asin: B07NRLPPQL | Ean: 0653846707376 | UPC: 653846707376
A Faucet Wrench Will Assist You Assemble The Adapter To The Faucet More Easily;.
！！Ps！！:There Are Some Faucet Connectors In Our Products With Wrong Size. If You Receive The Goods And Find That The Size Is Wrong, Don't Worry. Please Contact Us And We Will Send You The Correct Accessories. We Are Very Sorry For The Inconvenience, And We Will Do Our Best To Provide You With Good Products And Services.
Ball Lock Disconnect Thread Or Pin Lock Disconnect Thread Can Connect The Adapter;.
Standard Size For Adapter Can Connect Draft Faucet Directly;.
Features
- Include 2 PCS Quick Disconnect Faucet Adapter;
- Standard Size for Adapter can Connect Draft Faucet Directly;
- A Faucet Wrench will Assist you Assemble the Adapter to the Faucet more Easily;
- Ball Lock Disconnect Thread or Pin Lock Disconnect Thread can Connect the Adapter;
- PS :There are some faucet connectors in our products with wrong size. If you receive the goods and find that the size is wrong, don't worry. Please contact us and we will send you the correct accessories. We are very sorry for the inconvenience, and we will do our best to provide you with good products and services
- See more on Amazon...
Brand: LUCKEG
See On Amazon #19
BBTUS 2PCS 1/4" 3/8" 5/16" Plastic Tube in-line Hose Barb Quick Release Coupling, Quick-disconnect insert Coupler,Shut-Off Valved in Quick Connector,Female Connect Fittings (2x Female Connector)
Asin: B0B1LW54SZ | Model: GYJT2204 | PartNumber: GYJT2204
When The Male Coupling And The Female Coupling Are Locked Together By The Snap Ring, The Pipeline Can Be Formed Into A Passage In An Instant; When The Snap Ring Is Released, The Male Coupling And The Female Coupling Are Automatically Separated, Both Ends Of The Pipe Are Closed Instantly..
Suitable For A Wide Variety Area. Such As Beer Brewing/Co₂ And O₂ Gas Line/ Fuel Line/Homefill Compressor /Floating Dip Tube/.
The Temperature Range Is -40F To 180F.They Can Handle A Vacuum To 120 Psi. There Will Be No Leakage Or Air After It Is Disconnected. So, You Need Not Worry About Them Leaking Gas..
When The Male Coupling And The Female Coupling Are Independent In A Piping System, Either Of Them Has A Shut-Off Valve Function To Prevent Liquid Or Gas Leakage And Flowback..
Features
- The quick coupling needs to be used together with a male connector and a female connector! Therefore, you have to purchase a male connector and a female connector at the same time. In addition, if the male connector built-in a check valve, you have to purchase a female connector which also built-in a check valve.
- When the male coupling and the female coupling are independent in a piping system, either of them has a shut-off valve function to prevent liquid or gas leakage and flowback.
- When the male coupling and the female coupling are locked together by the snap ring, the pipeline can be formed into a passage in an instant; when the snap ring is released, the male coupling and the female coupling are automatically separated, both ends of the pipe are closed instantly.
- The temperature range is -40F to 180F.They can handle a vacuum to 120 psi. There will be no leakage or air after it is disconnected. So, you need not worry about them leaking gas.
- Suitable for a wide variety area. Such as Beer brewing/CO and O gas line/ Fuel Line/Homefill compressor /floating dip tube/
- See more on Amazon...
Brand: BBTUS | Manufacturer: BBTUS
Dimensions: 0.94 x 1.97 x 0.75 Inches
Warranty: One Year Warranty
See On Amazon #20
LUCKEG Corny Ball Lock MFL Disconnect Set Keg Quick Disconnects Set Stainless Steel Swivel Nuts and Worm Clamp for Home Brewing Beer Keg System 4 Pairs
Asin: B0CSJSMKDD | Model: 1 | PartNumber: 1
3.Easy Connect: The Gray Keg Disconnect Connect 5/16" Swivel Nut, The Black Keg Disconnect Connect 3/16" Swivel Nut, Tighten The Clamps When It Connects The Beer Gas Line Will Guarantee No Leak;.
5.Guarantee: Quality Guarantee, Any Problem For Ball Lock Disconnect Mfl Sets, Money Back Or Replacement Free..
4.Widely Use: The Ball Lock Keg Fitting Is For Most Cornelius Keg, Pepsi Keg, 7-Up Tanks, Dispense Craft Cocktails, Soda And Other Beverages From Your Existing Keg;.
2.Material: Pbt Material For Ball Lock Mfl And Stainless Steel Material For Swivel Nuts And Plastic Handle For Worm Clamps;.
Features
- 1.Include: Ball Lock Quick Disconnect sets for Gas and Liquid line (4 pairs), two sizes of Swivel Nuts 3/16" and 5/16"(4pairs), Free Worm Clamps (4pairs);
- 2.Material: PBT Material for Ball Lock MFL and Stainless Steel Material for Swivel Nuts and Plastic Handle for Worm Clamps;
- 3.Easy Connect: The Gray Keg Disconnect connect 5/16 Swivel Nut, the Black Keg Disconnect connect 3/16 Swivel Nut, tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak;
- 4.Widely Use: The Ball Lock Keg Fitting is for most Cornelius Keg, Pepsi Keg, 7-UP tanks, dispense craft cocktails, soda and other beverages from your existing keg;
- 5.Guarantee: Quality Guarantee, any problem for Ball Lock Disconnect MFL Sets, Money Back or Replacement Free.
- See more on Amazon...
Brand: LUCKEG | Manufacturer: LUCKEG
See On Amazon
Looking For Something Else?
Search