Universal Fan Straps Kit Zip Tie Cable Mounting Kit Radiator Oil Cooler Kit Straps Trans Cooler
Asin: B003ZWXIAO | Model: Fan strap | PartNumber: Fan strap
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Universal Fit.
Direct Bolt On All Vehicles(Some Cars Maybe Need To Drill/Modify).
Features
- Universal Fan Straps Kit Zip Tie Cable Mounting Kit Radiator Oil Cooler Kit Straps Trans Cooler
- DIRECT BOLT ON ALL VEHICLES(SOME CARS MAYBE NEED TO DRILL/MODIFY)
- Universal Fit
- See more on Amazon...
Brand: Godspeed | Manufacturer: ACECLUB
See On Amazon Similar To Universal Fan Straps Kit Zip
#1
Fan Mounting Kit, Mellbree 2-Pack Electric Radiator Fan Mounting Kit Compatible for Electric Cooling Fan and Transmission Cooler
Asin: B09BV73XF8
Equipped With Protective Springs: The Set Contains 4 Protective Springs, Which Can Prevent The Bottom Of The Installation From Breaking..
Included In The Package: 8 X Nylon Mounting Rod, 16 X Foam Pad, 8 X Spring, 8 X Fixed Buckle..
Fast And Effective Installation Saves You Valuable Time..
Fan Mounting Kit Compatible For Transmission Coolers And Electric Fans..
Features
- The car radiator fan unit is a part of the car's cooling system and is controlled by a thermostat switch or the vehicle. The role of the fan is to help blow cooling air into the radiator when the coolant level rises above a certain temperature. Over time, they begin to wear and may be impacted by stones and other contaminants. With these fan mounting repair kits, replacing the fan unit has never been easier.
- Fan mounting kit compatible for transmission coolers and electric fans.
- Equipped with protective springs: The set contains 4 protective springs, which can prevent the bottom of the installation from breaking.
- Fast and effective installation saves you valuable time.
- Included in the package: 8 X nylon mounting rod, 16 X foam pad, 8 X spring, 8 X fixed buckle.
- See more on Amazon...
Brand: Mellbree | Manufacturer: Mellbree
See On Amazon #2
ESEWALAS Adjustable Battery Hold Down,Battery Tie Down Kit,Universal Battery Crossbar with J Bolt Battery Hold Down Bracket,Stainless Steel J Bolt Sets Car Battery Holder,Battery Tie Down Holder
Asin: B0BZYL4MGQ | Model: 266TYDPGDJ001 | PartNumber: 266TYDPGDJ001
[Adjustable] Bolt Length: 11 Inches, Adjustable Cross Bar Width Expanded From 5.32 Inches To 7.86 Inches. Please Confirm Whether Your Battery Size Is Suitable Before Purchasing..
[Widely Applicable] The Battery Holder Is Suitable For Fixing Batteries In Most Cars, Trucks, And Suvs. Compared To Other L-Hooks, Our J-Hook Universal Battery Holder Can Secure The Battery More Securely, And It Does Not Easily Slide Out Of The Tray, Providing Stable Fixation For The Battery..
[Easy To Install] Adjust The Width And Height According To The Size Of The Battery, Hook The J-Shaped Hook Into The Hole On The Tray, And Tighten The Butterfly Nut Screws To Ensure A Firm Grip On The Battery..
[Anti Corrosion] The Surface Of The Adjustable Crossbar Of A General Purpose Battery Has Undergone Anodization Treatment, And Excellent Spraying Technology Makes Its Surface Smoother And Cleaner. Enhanced Corrosion And Rust Resistance..
Features
- [High Quality] This car battery holder is made of high-quality iron and stainless steel, which is not easy to break, durable, and has a long service life.
- [Anti Corrosion] The surface of the adjustable crossbar of a general purpose battery has undergone anodization treatment, and excellent spraying technology makes its surface smoother and cleaner. Enhanced corrosion and rust resistance.
- [Adjustable] Bolt length: 11 inches, adjustable cross bar width expanded from 5.32 inches to 7.86 inches. Please confirm whether your battery size is suitable before purchasing.
- [Easy to Install] Adjust the width and height according to the size of the battery, hook the J-shaped hook into the hole on the tray, and tighten the butterfly nut screws to ensure a firm grip on the battery.
- [Widely Applicable] The battery holder is suitable for fixing batteries in most cars, trucks, and SUVs. Compared to other L-hooks, our J-hook universal battery holder can secure the battery more securely, and it does not easily slide out of the tray, providing stable fixation for the battery.
- See more on Amazon...
Brand: ESEWALAS | Manufacturer: ESEWALAS
Warranty: no
See On Amazon #3
3 Set Fan Mounting Kit, Electric Radiator Fan Ties Straps Mounting Kit for Car Vehicle Electric Radiator Fan 7" 9" 10" 12" 14" 16"
Asin: B0B9XQ4CGV
Equipped With Protective Springs: The Set Contains 4 Protective Springs, Which Can Prevent The Bottom Of The Installation From Breaking..
Package Include: 12Pcs Nylon Mounting Rod, 24Pcs Foam Pad, 12Pcs Spring, 12Pcs Fixed Buckle..
Sturdy And Small Enough：This Mounting Kit Is Strong Easy Flexible And Easy To Use! Great For Applications Where Space Is Tight..
Easy To Install：Clean The Path With A Cleaning Brush First. Just Use A Soft Touch And Roll The Posts Back And Forth For Easy Pass Through The Coil And Radiator.Slide The Foam On The Opposite Side, And Then Push On The Clip And You Are Done. It Will Find Its Path - Do Not Push Forcefully Or It May Damage The Coil/Radiator. No Tools Needed Except Some Diagonal Cutters To Trim The Excess..
Features
- Widely use : Electric Radiator Fan plastic rods Installation Kit Compatible Mounting 7" 9" 10" 12" 14" 16" Electric Radiator Spal fan, Electric Cooling Fan and Transmission Cooler.
- Easy to install Clean the path with a cleaning brush first. Just use a soft touch and roll the posts back and forth for easy pass through the coil and radiator.slide the foam on the opposite side, and then push on the clip and you are done. It will find its path - do not push forcefully or it may damage the coil/radiator. No tools needed except some diagonal cutters to trim the excess.
- Equipped with protective springs: The set contains 4 protective springs, which can prevent the bottom of the installation from breaking.
- Sturdy and small enough this mounting kit is strong easy flexible and easy to use! Great for applications where space is tight.
- Package include: 12pcs nylon mounting rod, 24pcs foam pad, 12pcs spring, 12pcs fixed buckle.
- See more on Amazon...
Brand: daier | Manufacturer: daier
See On Amazon #4
Zlirfy CV Boot Clamps,CV Joint Boot Crimp Clamp Kit,5pcs Small and 5pcs Large,Car Accessories Adjustable Stainless Steel Drive Shaft CV Boot Clamp,Fits for Steering Gear Gaiters
Asin: B0CDBT8C6W | Model: 768BXGWXZDZ001 | PartNumber: 768BXGWXZDZ001
[Perfect Replacement] Loose Or Damaged Parts May Be Harmful To Your Car And Cause Grease Leakage, So New Parts Can Help Correct Any Problems. This Universal Adjustable Stainless Steel Transmission Shaft Can Perfectly Replace The Damaged Cv Dust Cover Of The Drive Shaft In Cars..
[Widely Applicable] Stainless Steel Adjustable Drive Shaft Dust Cover Fixture Is Suitable For Most Vehicles' Steering Gear Dust Covers And Fuel Hoses. They Help To Replace Damaged Drive Shaft Cv Dust Boot Clamps In Cars..
[Easy To Use] There Is A Strap That Goes Around The Boot, And Then A Part Of It Stands Up Like An Inverted U-Shape, While The Rest Of The Strap Is Clamped At The Other End Of The Strap To Form A Complete Loop. You Try To Tighten It As Tightly As Possible, Then Use Pliers To Clamp The U-Shape And Tighten It For The Rest Of The Process..
[High Quality Materials]The Cv Joint Fixture Is Made Of Very Durable Stainless Steel Material, Which Has Excellent Hardness And Corrosion Resistance. Even If Left In A Humid Environment For A Long Time, It Will Not Rust Or Damage. It Is Very Stable, Safe And Reliable, And Will Not Cause Any Damage To Your Vehicle..
Features
- [Package Includes] This set includes a set of 10 universal joint dust boot crimping clamps. The size of 5 small clips is 1.250 inches to 1.620 inches. Five large clips with dimensions ranging from 2.750 inches to 5.000 inches. The quantity is sufficient to meet all your daily needs.
- [High Quality Materials]The CV joint fixture is made of very durable stainless steel material, which has excellent hardness and corrosion resistance. Even if left in a humid environment for a long time, it will not rust or damage. It is very stable, safe and reliable, and will not cause any damage to your vehicle.
- [Perfect Replacement] Loose or damaged parts may be harmful to your car and cause grease leakage, so new parts can help correct any problems. This universal adjustable stainless steel transmission shaft can perfectly replace the damaged CV dust cover of the drive shaft in cars.
- [Easy to Use] There is a strap that goes around the boot, and then a part of it stands up like an inverted U-shape, while the rest of the strap is clamped at the other end of the strap to form a complete loop. You try to tighten it as tightly as possible, then use pliers to clamp the U-shape and tighten it for the rest of the process.
- [Widely Applicable] Stainless steel adjustable drive shaft dust cover fixture is suitable for most vehicles' steering gear dust covers and fuel hoses. They help to replace damaged drive shaft CV dust boot clamps in cars.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
See On Amazon #5
RACOONA Helmet Button Buckle,Motorcycle Helmet Quick Release Buckle Strap Locks,Car Accessories otorcycle Helmet Speed Clip Quick Release Chin Strap Button,Bike Helmet Clip Buckle,Fits for Any Helmet
Asin: B0CH86RJH4 | Model: 904MTCTKCK001 | PartNumber: 904MTCTKCK001
[Easy To Use] Throughout The Installation Process, You Don't Need To Remove The Button Or Cut The Seat Belt, Just Sew It Together To Easily Fit Onto The Helmet. Secure Your Helmet In A Safe, Fast, And Convenient Way..
[Practical Solution] Helmet Buckle Is A Professional Chin Strap Buckle Suitable For Any Helmet. Whether You Are A Motorcycle Rider, Cyclist, Or A Passionate Sports Enthusiast, This Buckle Kit Provides A Practical Solution For Easily Securing Your Helmet..
[Multi Functional] These Quick Lock Adapter Helmet Straps Are Perfect For Backpacks, Bracelets, Wallets, Lanyards, Dog Collars, Belts, And More. Used To Fix The Broken Helmet Repair Kit, Suitable For Various Helmets..
[Quick Release] This Buckle Features A Quick Release Buckle Design That Allows For Quick Fixation And Easy Release Of The Helmet's Chin Strap. Farewell To Exploring The Traditional Buckle, The Quick Release Mechanism Ensures That Every Connection Is Safe And Reliable, Reducing The Time To Wear A Helmet. It Is Very Convenient, Fast, And Safe..
Features
- [High Quality Material] The plastic buckle of the motorcycle helmet is made of high-quality plastic material, which is not easy to crack, rust resistant, has stable characteristics, excellent performance, and is durable.
- [Quick Release] This buckle features a quick release buckle design that allows for quick fixation and easy release of the helmet's chin strap. Farewell to exploring the traditional buckle, the quick release mechanism ensures that every connection is safe and reliable, reducing the time to wear a helmet. It is very convenient, fast, and safe.
- [Easy to Use] Throughout the installation process, you don't need to remove the button or cut the seat belt, just sew it together to easily fit onto the helmet. Secure your helmet in a safe, fast, and convenient way.
- [Multi Functional] These quick lock adapter helmet straps are perfect for backpacks, bracelets, wallets, lanyards, dog collars, belts, and more. Used to fix the broken helmet repair kit, suitable for various helmets.
- [Practical Solution] Helmet buckle is a professional chin strap buckle suitable for any helmet. Whether you are a motorcycle rider, cyclist, or a passionate sports enthusiast, this buckle kit provides a practical solution for easily securing your helmet.
- See more on Amazon...
Brand: RACOONA | Manufacturer: RACOONA
See On Amazon #6
LTI-DIRECT Universal Fan Mount Kit for 7" 9" 10" 12" 14" 16" Electric Slim Fan Plastic Push Through Radiator Tie Strap (2 Pack)
Asin: B07VR7K8S3 | Ean: 6939392904570
Use For Electric Cooling Fan And Transmission Cooler.
Universal Fit All 7"/9"/10"/12"/14"/16" Slim Fans..
Includes: 8- 9" Ties 8- Rubber Pads 8- Connectors 8 Springs.
Push Through Radiator Style.
Features
- For installation of transmission coolers and electric fans
- Push Through Radiator Style
- Use For Electric Cooling Fan And Transmission Cooler
- INCLUDES: 8- 9 TIES 8- RUBBER PADS 8- CONNECTORS 8 SPRINGS
- Universal fit all 7/9/10/12/14/16 slim fans.
- See more on Amazon...
Brand: LTI-DIRECT | Manufacturer: LTI-DIRECT
See On Amazon #7
ESEWALAS Aluminum Alloy Battery Hold Down Bracket,Car Battery Holder Kit with 10in J bolts,Car Battery Lock Down,Battery Tie Down Bracket,Universal Bracket Hold Lock Accessories (Black)
Asin: B0C2KF6X1S | Model: 359DCGDZJ003 | PartNumber: 359DCGDZJ003
[High Quality And Durable]The Battery Mounting Bracket Is Made Of High-Quality Aluminum Alloy, Which Is Sturdy, Rust Proof, And Antioxidant. Excellent Spraying Technology Makes Its Surface Smoother And Cleaner. Enhance Corrosion Resistance And Rust Prevention. The Matching Bolts Are Made Of High-Quality Stainless Steel, Durable, Sturdy, And Can Be Used For A Long Time..
[Reminder] The Battery Fixing Device Aims To Ensure That The Battery Is Securely Fixed, But This Type Of Fastening Device Is Not Suitable For Certain Battery Surfaces Between Raised Ventilation Caps. Please Measure The Diameter Of The Primary Battery Before Purchasing To Avoid Purchasing Products With Incorrect Dimensions..
[Applicable] The Pool Bracket Kit Is Usually Suitable For Most Groups Of 21, 21R, 22F, 22Hf, 22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6 (48), H8 (49), 85, 86, 90, 91, 92, 93, 94R, 95R, 96R, 97R, 98R, 99, 124, And 140R Batteries..
[Product Size] The Total Length Of Our Battery Mounting Bracket Is 8.58 ", The Distance Between Bolt Centers Is 7.48", And The Bolt Length Is 10 ". For Excessively Long Bolts, The Hook Can Be Appropriately Cut..
Features
- [Package Includes] The package includes 1 battery mounting bracket,2 pcs 10 inch J-shaped hooks, 2 sets of accessories (suitable for different installation types), 2 hexagonal and wing nuts, 2 rubber protective sleeves, 2 protective rubber washers, 2 spring lock washers, and 2 flat washers.
- [Product Size] The total length of our battery mounting bracket is 8.58 , the distance between bolt centers is 7.48, and the bolt length is 10 . For excessively long bolts, the hook can be appropriately cut.
- [High Quality and Durable]The battery mounting bracket is made of high-quality aluminum alloy, which is sturdy, rust proof, and antioxidant. Excellent spraying technology makes its surface smoother and cleaner. Enhance corrosion resistance and rust prevention. The matching bolts are made of high-quality stainless steel, durable, sturdy, and can be used for a long time.
- [Applicable] The pool bracket kit is usually suitable for most groups of 21, 21R, 22F, 22HF, 22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6 (48), H8 (49), 85, 86, 90, 91, 92, 93, 94R, 95R, 96R, 97R, 98R, 99, 124, and 140R batteries.
- [Reminder] The battery fixing device aims to ensure that the battery is securely fixed, but this type of fastening device is not suitable for certain battery surfaces between raised ventilation caps. Please measure the diameter of the primary battery before purchasing to avoid purchasing products with incorrect dimensions.
- See more on Amazon...
Brand: ESEWALAS | Manufacturer: ESEWALAS
Warranty: no
See On Amazon #8
Zlirfy Automotive Ground Strap Kit,Universal Flat Braided Copper Ground Strap,3PCS 10" x 1/2" and 2PCS 13" x 1/2" Car Ground Cable Straps Braided,Automotive Engine Copper Ground Strap
Asin: B0C4DCN567 | Model: 411WTJDX001 | PartNumber: 411WTJDX001
[Excellent Conductivity] These Grounding Busbar Kits Provide Excellent Maximum Conductivity With A Rated Current Of 62 Amperes. Terminal Specification: 5/16 "..
[Widely Used] The Engine Grounding Busbar Is Suitable For All Types Of Vehicles. This Grounding Busbar Is A Good Choice For Connecting The Engine Block To The Frame..
[Weaving Structure] Our Tin Plated Braided Grounding Strip Adopts Weaving Technology, Which Is Firmly Connected, Has Good Flexibility, Can Be Bent At Large Angles, And The Fine Wire Weaving Is Uniform, With Low Heat Generation, And Is Convenient To Use..
[High Quality Material] This Engine Grounding Busbar Kit Is Made Of Copper, Durable Material That Ensures Strong Connections And Long Service Life. The Tin Plated Surface Prevents Oxidation Or Corrosion Of The Grounding Busbar, Resulting In A Long Service Life..
Features
- [Package Includes]The set includes three 10 "x 1/2" and two 13 "x 1/2" grounding wires, with sufficient quantity and size to meet your various needs.
- [High Quality Material] This engine grounding busbar kit is made of copper, durable material that ensures strong connections and long service life. The tin plated surface prevents oxidation or corrosion of the grounding busbar, resulting in a long service life.
- [Excellent Conductivity] These grounding busbar kits provide excellent maximum conductivity with a rated current of 62 amperes. Terminal specification: 5/16 .
- [Weaving Structure] Our tin plated braided grounding strip adopts weaving technology, which is firmly connected, has good flexibility, can be bent at large angles, and the fine wire weaving is uniform, with low heat generation, and is convenient to use.
- [Widely Used] The engine grounding busbar is suitable for all types of vehicles. This grounding busbar is a good choice for connecting the engine block to the frame.
- See more on Amazon...
Brand: Zlirfy | Manufacturer: Zlirfy
Warranty: no
See On Amazon #9
Suvnie 2 PCS Fan Mounting Kit, Car Electric Radiator Fan Plastic Tie Strap Installation Kit, Universal Vehicle Mounting Accessories for Electric Cooling Fan and Transmission Cooler
Asin: B0CPKS6B75 | Model: Fan Mounting Kit | PartNumber: Fan Mounting Kit
【Quality Material】: The Mounting Snaps And Mounting Rods Are Crafted With Premium Plastics, Which Are Wear And Tear Resistant. The Springs Are Made Of Stainless Steels, Which Are Not Easy To Deform And Rust. The Pads Utilize Quality Foams, Which Are Equipped With Good Flexibility, Providing Effective Protection To Surrounding Parts..
【Wide Applicability】: The Mounting Rod's Length Is 8.66 Inches, The Mounting Snap's Diameter Is 0.9 Inches, And The Maximum Diameter Of The Spring Is 0.72 Inches. This Electric Radiator Fan Installation Kit Is Compatible For Most Electric Cooling Fans, Transmission Coolers, And Other Vehicles And Engines..
【Installation Steps】: First, Small Head Of A Spring And A Foam Pad Are Inserted To A Mounting Rod And Slid To The Bottom. Second, Insert The Rod Through The Fan Mounting Hole And The Radiator. Third, Insert Another Foam Pad To The Rod From The Other Side Of The Radiator. Finally, Insert The Mounting Snap To The Rod And Slide It To The Radiator. Repeat The Steps Four Times To Finish The Installation..
【Practical Function】: This Radiator Fan Installation Kit Is Used To Fix The Cooling Fans In Desired Positions. The Cooling Fans Help Dissipate Heat By Bringing Air Into The Radiator. Therefore, Using The Fan Installation Kit To Install Cooling Fans Prevents The Engine From Overheat At High Speeds And High Loads, Thus Making The Engine Run More Stable..
Features
- Different Packaging : We offer a complete kit that includes all the accessories you need for installation. And here are two kinds of packaging with different quantities. The one-piece packaging provides one set of kit including 4 mounting snaps, 4 mounting rods, 4 springs and 8 foam pads while the two-piece packaging includes two sets of kit.
- Practical Function : This radiator fan installation kit is used to fix the cooling fans in desired positions. The cooling fans help dissipate heat by bringing air into the radiator. Therefore, using the fan installation kit to install cooling fans prevents the engine from overheat at high speeds and high loads, thus making the engine run more stable.
- Quality Material : The mounting snaps and mounting rods are crafted with premium plastics, which are wear and tear resistant. The springs are made of stainless steels, which are not easy to deform and rust. The pads utilize quality foams, which are equipped with good flexibility, providing effective protection to surrounding parts.
- Installation Steps : First, small head of a spring and a foam pad are inserted to a mounting rod and slid to the bottom. Second, insert the rod through the fan mounting hole and the radiator. Third, insert another foam pad to the rod from the other side of the radiator. Finally, insert the mounting snap to the rod and slide it to the radiator. Repeat the steps four times to finish the installation.
- Wide Applicability : The mounting rod's length is 8.66 inches, the mounting snap's diameter is 0.9 inches, and the maximum diameter of the spring is 0.72 inches. This electric radiator fan installation kit is compatible for most electric cooling fans, transmission coolers, and other vehicles and engines.
- See more on Amazon...
Brand: Suvnie | Manufacturer: Suvnie
See On Amazon #10
Hirificing CV Boot Clamp pliers, 5Sets CV Joint Boot Crimp Clamp Kit for Steering Gear Gaiters, 5PCS Small & 5PCS Large Adjustable Stainless Band Steel Drive Shaft AXLE Boot Clamp
Asin: B0CX158KZP | Model: Hirificing-AUTO-06 | PartNumber: Hirificing-AUTO-06
【Meet Daily Needs】There Are A Total Of 10 Cv Boot Clamps Pliers In The Package, Including 5 Small Clamps Ranging From 1.250 Inches To 1.620 Inches And 5 Large Clamps Ranging From 2.750 Inches To 5.000 Inches To Meet Your Daily Needs..
【Easy To Operate】Our Cv Axle Boot Clamp Uses A Long Metal Piece With A Buckle On The End, Just Wrap It Around The Boot Or Pipe, And Then The Rest Is Clipped To The Other End Of The Strap To Form A Complete Ring, And Finally Use Pliers To Pinch The U-Shaped Part Tightly..
【High Quality Material】These Cv Joint Boot Crimp Clamp Kit Are Made Of High-Quality Non-Magnetic Stainless Steel, Which Is Rust-Proof And Corrosion-Resistant, And Can Maintain Stable Performance Even If It Is Placed In A Humid Environment For A Long Time, With A Certain Degree Of Flexibility And Very Durable..
【Widely Used】Our Steering Boot Clamp Is Suitable For Most Vehicles' Steering Gear Dust Covers And Fuel Hoses, And Works Well With Atv, Utv And Cv Boots, Suitable For Vag, Opel, Bmw, Mercedes -Benz, Honda, Nissan, Mazda And Other Models..
Features
- Excellent Functionality Our CV boot clamp pliers can replace Loose, lost or damaged parts to prevent the car from being harmful grease leakage. It is a perfect replacement for the damaged CV dust cover of the car's drive shaft, saving time and money in repairs.
- Widely Used Our steering boot clamp is suitable for most vehicles' steering gear dust covers and fuel hoses, and works well with ATV, UTV and CV boots, suitable for VAG, Opel, BMW, Mercedes -Benz, Honda, Nissan, Mazda and other models.
- Meet Daily Needs There are a total of 10 CV boot clamps pliers in the package, including 5 small clamps ranging from 1.250 inches to 1.620 inches and 5 large clamps ranging from 2.750 inches to 5.000 inches to meet your daily needs.
- High Quality Material These CV joint boot crimp clamp kit are made of high-quality non-magnetic stainless steel, which is rust-proof and corrosion-resistant, and can maintain stable performance even if it is placed in a humid environment for a long time, with a certain degree of flexibility And very durable.
- Easy to Operate Our CV axle boot clamp uses a long metal piece with a buckle on the end, just wrap it around the boot or pipe, and then the rest is clipped to the other end of the strap to form a complete ring, and finally use pliers to pinch the U-shaped part tightly.
- See more on Amazon...
Brand: Hirificing | Manufacturer: Hirificing
Dimensions: 0.33 x 3.00 x 3.00 Inches | Weight: 0.25 Pounds
See On Amazon #11
LTI-DIRECT Universal Fan Mount Kit for 7" 9" 10" 12" 14" 16" Electric Slim Fan Plastic Push Through Radiator Tie Strap (1 Pack)
Asin: B07VN16RMF | Model: LTI-FMK | PartNumber: LTI-FMK | Ean: 0650079644652 | UPC: 650079644652
Use For Electric Cooling Fan And Transmission Cooler.
Universal Fit All 7"/9"/10"/12"/14"/16" Slim Fans..
Includes: 8- 9" Ties 8- Rubber Pads 8- Connectors 8 Springs.
Push Through Radiator Style.
Features
- For installation of transmission coolers and electric fans
- Push Through Radiator Style
- Use For Electric Cooling Fan And Transmission Cooler
- INCLUDES: 8- 9 TIES 8- RUBBER PADS 8- CONNECTORS 8 SPRINGS
- Universal fit all 7/9/10/12/14/16 slim fans.
- See more on Amazon...
Brand: LTI-DIRECT | Manufacturer: LTI-DIRECT
See On Amazon #12
ESEWALAS 78'' Battery Tie Hold Down Strap,Battery Box Hold Down Lashing Strap with Stainless Steel Cam Buckle,Battery Tie Down Strap Kit with Deck Loop Mounts and SS Screws
Asin: B0C5R33FLP | Model: 501DCBDTJ001 | PartNumber: 501DCBDTJ001
[Size] The Length Of The Strapping Is 78 Inches And The Width Is 0.98 Inches. You Can Cut The Binding Tape To The Length You Need As Needed..
[Multi Purpose] The Battery Box Fixing Strap Has A Wide Range Of Applications, Whether Indoor Or Outdoor, Suitable For Many Aspects Of Daily Life. In The Home, It Can Fix Miscellaneous Items, Prevent Vibrations, And Provide Temporary Clotheslines; In The Transportation Of Goods, They Can Be Fixed On Bicycles, Motorcycles, Trolleys, Etc. To Package And Secure Goods And Luggage; In Long-Distance Travel And Outdoor Activities, It Can Fix Tents, Hang Items, Etc., Making It A Very Practical And Convenient Ideal Tool..
[Function] The Battery Box Fixing Strap Can Safely Secure The Battery, Cooler, And Fuel Tank To Ships, Decks, Truck Beds, Trailers, Etc. To Prevent Equipment From Slipping..
[Easy To Use And Disassemble] The Lock Buckle Adopts A Sturdy Gear Design, Which Can Be Quickly Installed And Disassembled For Fixation And Adjustment. Never Come Off, Good Flexibility..
Features
- [High Quality Nylon]This battery strap is made of high-quality nylon tape, which has good tensile strength and will not deform after long-term use. It is denser and more wear-resistant than ordinary ribbons. Long service life, safe and stable.
- [Easy to Use and Disassemble] The lock buckle adopts a sturdy gear design, which can be quickly installed and disassembled for fixation and adjustment. Never come off, good flexibility.
- [Size] The length of the strapping is 78 inches and the width is 0.98 inches. You can cut the binding tape to the length you need as needed.
- [Function] The battery box fixing strap can safely secure the battery, cooler, and fuel tank to ships, decks, truck beds, trailers, etc. to prevent equipment from slipping.
- [Multi Purpose] The battery box fixing strap has a wide range of applications, whether indoor or outdoor, suitable for many aspects of daily life. In the home, it can fix miscellaneous items, prevent vibrations, and provide temporary clotheslines; In the transportation of goods, they can be fixed on bicycles, motorcycles, trolleys, etc. to package and secure goods and luggage; In long-distance travel and outdoor activities, it can fix tents, hang items, etc., making it a very practical and convenient ideal tool.
- See more on Amazon...
Brand: ESEWALAS | Manufacturer: ESEWALAS
Warranty: no
See On Amazon #13
American Volt 4-Pack Electric Radiator Cooling Fan Tie Strap Complete Mounting Kit Universal Plastic Zip Pads Car Truck Mount Install
Asin: B0186N7Y2Y | Model: AV | PartNumber: AV | Ean: 0754242169338 | UPC: 754242169338
Universal Fit For Most Major Automotive Electric Fan Brands..
Secures Fan To A Condenser, Radiator, Transmission Oil Cooler..
Easy Plug And Play Installation For Any Car Or Truck Radiator..
Unique High Heat Resistant Design For Long Lasting Durability..
Features
- 4 pack high strength electric fan installation mounting kits.
- Unique high heat resistant design for long lasting durability.
- Universal fit for most major automotive electric fan brands.
- Easy plug and play installation for any car or truck radiator.
- Secures fan to a condenser, radiator, transmission oil cooler.
- See more on Amazon...
Brand: American Volt | Manufacturer: American Volt
Weight: 0.13 pounds
See On Amazon #14
Fan Mounting Kit, Electric Radiator Fan Tie Strap Mounting Kit for Car Vehicle Mount Hold Radiator Spal Fan and Transmission Cooler (Pack of 2)
Asin: B0C891TWM6 | Model: Fan Mounting Kit | PartNumber: Fan Mounting Kit
How To Use: Clean The Path With A Cleaning Brush First. Simply Use A Soft Touch And Scrolling Post To Easily Pass Back And Forth Through The Coil And Heat Sink. Slide The Foam On The Other Side, Then Press The Clip, And You're Done. It Will Find Its Path - Do Not Push Hard, Otherwise It May Damage The Coil/Heat Sink. No Tools Needed, Except For Some Diagonal Cutters To Trim Excess Parts.
Material: Made Of High Quality Nylon Plastic Toughness Is Not Easy To Break.
Use For :The Radiator Fan Is Part Of The Transmission Cooler System, Is Controlled By The Thermostat Switch Or The Vehicle.
Features
- Compatible with: for transmission coolers and electric fans
- Use for :The radiator fan is part of the transmission cooler system, is controlled by the thermostat switch or the vehicle
- How to use: Clean the path with a cleaning brush first. Simply use a soft touch and scrolling post to easily pass back and forth through the coil and heat sink. Slide the foam on the other side, then press the clip, and you're done. It will find its path - do not push hard, otherwise it may damage the coil/heat sink. No tools needed, except for some diagonal cutters to trim excess parts
- Material: Made of high quality nylon plastic toughness is not easy to break
- See more on Amazon...
Brand: SeSicWe | Manufacturer: SeSicWe
Warranty: 7 - 31 Days
See On Amazon #15
LTI-DIRECT Universal Fan Mount Kit for 7" 9" 10" 12" 14" 16" Electric Slim Fan Plastic Push Through Radiator Tie Strap (4 Pack)
Asin: B091552J15 | Model: FMK | PartNumber: FMK | Ean: 0808222091109 | UPC: 808222091109
Use For Electric Cooling Fan And Transmission Cooler.
Universal Fit All 7"/9"/10"/12"/14"/16" Slim Fans. Lti Provided 6 Months Warranty 30 Free Return No Question Ask..
Includes: 9" Ties 8- Rubber Pads 8- Connectors 8 Springs.
Push Through Radiator Style.
Features
- For installation of transmission coolers and electric fans
- Push Through Radiator Style
- Use For Electric Cooling Fan And Transmission Cooler
- INCLUDES: 9 TIES 8- RUBBER PADS 8- CONNECTORS 8 SPRINGS
- Universal fit all 7/9/10/12/14/16 slim fans. LTI provided 6 months warranty 30 FREE RETURN NO QUESTION ASK.
- See more on Amazon...
Brand: LTI-DIRECT | Manufacturer: LTI-DIRECT
See On Amazon #16
Ajustable Battery Hold Down with Stainless J bolt Kit,A Specialty Automotive Tools Car Battery Holder of Car SUV Truck RV Camper and Trailer (8inch/19cm bolts)
Asin: B0BXNG6YTG | Model: battery hold down | PartNumber: battery hold down
【Buyer's Guide】: Before Choosing Our Heavy Duty Battery Holder, Measure Your Battery In The Following Fitment Ranges. Width 5.7-8Inch,Length 1:4.9-10Inch/Length 2:3.74-8Inch/Length 3:6.5-11Inch.Please Choose The Right Holder According To Your Car Battery Size Before Purchasing..
【100% Satisfaction Experience】: If You Have Any Questions About The Product, Please Send An Email To Our Customer Service, We Offer A Perfect Service 24 Hours A Day. If The Item Is Defective In Any Way, We Are Willing To Send You A New One Or Give You A Full Refund To Provide You With The Most Satisfactory Product And Service, Thank You For Your Support!.
【Save On Maintenance Costs】:These Battery Mounts With Bolts And J-Bar Are Very Easy To Install And Use Easily, Even If You're Not A Professional Mechanic And Like To Fix Your Own Car, This Is Definitely A Smart Choice! Instead Of Going To The Garage,Do-It-Yourself Repairs Save You From Expensive Repairs..
【Protecting Battery For Car】: The Adjustable Battery J- Crossbar Is Equipped With Unique Bolts At Both Ends, Which Can Be Adjusted To Your Desired Length Or Width To Help Make Your Work Less Difficult. Holds The Battery Securely, Eliminating The Safety Hazards And Dangers Of A Poorly Secured Battery While Driving..
Features
- Robust and durable : Compared to competitor car battery holders, ours is made of high flame retardant, hiigh strength stainless steel with excellent weather resistance, low temperature toughness, flame retardant and easy diy removal for maximum s1ecurity to complete the battery fixing job.
- Protecting battery for car : The Adjustable Battery J- Crossbar is equipped with unique bolts at both ends, which can be adjusted to your desired length or width to help make your work less difficult. Holds the battery securely, eliminating the safety hazards and dangers of a poorly secured battery while driving.
- Buyer's guide : Before choosing our heavy duty battery holder, measure your battery in the following fitment ranges. Width 5.7-8inch,Length 1:4.9-10inch/Length 2:3.74-8inch/Length 3:6.5-11inch.Please choose the right holder according to your car battery size before purchasing.
- Save on maintenance costs :These battery mounts with bolts and J-bar are very easy to install and use easily, even if you're not a professional mechanic and like to fix your own car, this is definitely a smart choice! Instead of going to the garage,do-it-yourself repairs save you from expensive repairs.
- 100% satisfaction experience : If you have any questions about the product, please send an email to our customer service, we offer a perfect service 24 hours a day. If the item is defective in any way, we are willing to send you a new one or give you a full refund to provide you with the most satisfactory product and service, thank you for your support!
- See more on Amazon...
Brand: Salior | Manufacturer: Salior
Warranty: Warranty within 6 months
See On Amazon #17
American Volt 4-Pack Replacement Electric Radiator Cooling Fan Complete Mounting Kit Universal Plastic Zip-Ties Strap Fasteners Pads Automotive Car Truck Mount Installation
Asin: B0CRD9HS5F
Universal Fit For Most Major Automotive Electric Fan Brands..
Secures Fan To A Condenser, Radiator, Transmission Oil Cooler..
Easy Plug And Play Installation For Any Car Or Truck Radiator..
Unique High Heat Resistant Design For Long Lasting Durability..
Features
- 4 pack of high strength electric fan installation mounting kits.
- Unique high heat resistant design for long lasting durability.
- Universal fit for most major automotive electric fan brands.
- Easy plug and play installation for any car or truck radiator.
- Secures fan to a condenser, radiator, transmission oil cooler.
- See more on Amazon...
Brand: Generic | Manufacturer: American Volt
Weight: 0.13 pounds
See On Amazon #18
3Pcs Auto Manual Transmission Accelerate Clutch Brake Padal Cover Kit,Nonslip&No Drill Aluminum Alloy Sports Interior Accessories for Car,SUV,Truck (Silver/3pcs)
Asin: B0BYRMR12S | Model: truck interior accessories | PartNumber: truck interior accessories
【Aesthetic Car Decoration】. Available In Three Colors: Red, Blue And Silver, These Stylish Car Pedals Are The Best Choice For Modified Car Lovers. With Their Unique Design, Color And Texture, They Are The Finishing Touch To The Interior Of Your Car And Suit Your Personality..
【【Universal Installation】. No Drilling Is Required For These Manual Pedals, Each Pedal Is Secured To The Original Pedal With Screws And 7-Way Clips, Please Refer To The Installation Tutorial On The Back Of The Box For A Few Easy Steps To Complete The Installation. (Please Check The Size Of Your Pedal Before Purchase.
【Car Brake Pad Set】. 3-Piece Set That Includes Gas, Brake And Clutch Pedals, All Made Of Durable Heavy-Duty Aluminum Alloy And Thickened Pvc For Long-Lasting Durability. Unlike Pure Aluminum, These Pedals Have A Stylish Metallic Sheen That Adds A Unique Touch To Your Car's Interior..
【3Non-Slip Pedal】: You Can Be Sure Of Our Quality And Performance. In The Middle Of The Pedal, A Highly Elastic Anti-Slip Band Is Inlaid, Which Can Enhance The Friction Coefficient Of The Pedal, And The Anti-Slip Effect Is So Good That The Bottom Of Your Feet Will Not Slip Even In Rainy Days. Curved Design, Safe Driving And Reduce Foot Fatigue..
Features
- Function . Safety is our only criterion. Don't continue to use worn out car pedals to add danger to yourself, our pedals are made of high quality aluminum alloy and thickened PVC, which are not easy to break and deform, and effectively protect the gas pedal and brake to ensure your travel safety.
- 3non-slip Pedal : You can be sure of our quality and performance. In the middle of the pedal, a highly elastic anti-slip band is inlaid, which can enhance the friction coefficient of the pedal, and the anti-slip effect is so good that the bottom of your feet will not slip even in rainy days. Curved design, safe driving and reduce foot fatigue.
- Aesthetic car decoration . Available in three colors: red, blue and silver, these stylish car pedals are the best choice for modified car lovers. With their unique design, color and texture, they are the finishing touch to the interior of your car and suit your personality.
- Car brake pad set . 3-piece set that includes gas, brake and clutch pedals, all made of durable heavy-duty aluminum alloy and thickened PVC for long-lasting durability. Unlike pure aluminum, these pedals have a stylish metallic sheen that adds a unique touch to your car's interior.
- Universal Installation . No drilling is required for these manual pedals, each pedal is secured to the original pedal with screws and 7-way clips, please refer to the installation tutorial on the back of the box for a few easy steps to complete the installation. (Please check the size of your pedal before purchase
- See more on Amazon...
Brand: Salior | Manufacturer: Salior
Warranty: Warranty within 6 months
See On Amazon #19
Universal Electric Radiator Fan Strap Mounting Kit (2 Sets)-Compatible for Electric Cooling Fan and Transmission Cooler
Asin: B09WHRG5ZC
🔧【Material】:This Car Radiator Fan Unit Made Of High-Quality Nylon Plastic Selected Toughness Is Not Easy To Break.Fine Workmanship, Buckle Is Clear And Not Loose.
🔧 【Aftermarket Service】:Gskmotor Specializes In Providing High-Performance Repair And Replacement Parts For Various Automobiles, We Support 30 Days Returns And Exchanges. If You Have Any Questions, Please Feel Free To Contact Us, We Will Solve It For You As Soon As Possible, Customer Satisfaction Is Our Unremitting Pursuit..
🔧【Fit】:This Car Radiator Fan Unit Suitable For Most General Electric Radiator Fans, 6"7"8"9"10"11"12"13"14"15"16".It Can Also Be Used To Fix Motorcycle Fans And Atv Fans.
🔧【Value Packaging】: Included 8 X Nylon Mounting Rod, 16 X Foam Pad, 8 X Spring, 8 X Fixed Buckle.The Set Contains 4 Protective Springs, Which Can Prevent The Bottom Of The Installation From Breaking.Dimensions: 16.8 " L X 15.9 " W X 5.4 " H.
Features
- Product Description : This universal electric radiator fan strap mounting kit is a part of the car's cooling system and is controlled by a thermostat switch or the vehicle. The role of the fan is to help blow cooling air into the radiator when the coolant level rises above a certain temperature.
- Value Packaging : Included 8 x Nylon mounting rod, 16 x Foam pad, 8 x Spring, 8 x Fixed buckle.The set contains 4 protective springs, which can prevent the bottom of the installation from breaking.Dimensions: 16.8 L x 15.9 W x 5.4 H
- Material :This car radiator fan unit made of High-quality nylon plastic selected toughness is not easy to break.Fine workmanship, buckle is clear and not loose
- Fit :This car radiator fan unit suitable for most general electric radiator fans, 678910111213141516.It can also be used to fix motorcycle fans and ATV fans
- Aftermarket Service :GSKMOTOR specializes in providing high-performance repair and replacement parts for various automobiles, we support 30 Days returns and exchanges. If you have any questions, please feel free to contact us, we will solve it for you as soon as possible, customer satisfaction is our unremitting pursuit.
- See more on Amazon...
Brand: GSKMOTOR | Manufacturer: GSKMOTOR
See On Amazon
Looking For Something Else?
Search