Peachtree Woodworking Supply 8 Piece 13 Profile Flexible Contour Sanding Grip Set with 3 Different Flexible Foam Pads, 5 Profile Grips for Convex, Concave Sanding for Woodworkers, Automotive, Crafts
Asin: B0041IPAVQ | Ean: 0810948013983 | UPC: 810948013983
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.All You Have To Do Is Cut Your Paper To Size And Instead Of Folding It To Get That Tough Spot, Wrap It Around One Of The Contoured Grips! Its That Simple And That Easy. Ideal For Woodworkers, Finishing, Automotive Refinishing, Marine Body Work, Arts, Crafts Or Wherever You Need To Get Into Tight Spots..
The Opposite End Of The Contoured Grips Even Have Micro Profiles For Tighter Areas Such As Flat, Tight Radii, Knife Edges, Wedges And More..
This Package Includes 3 Contour Pads: 5-1/2 Inches X 2-3/4 Inches And 7/16,7/32,And 5/32 Inch Thick. The Five Grips Have One 1 Inch Wide Convex Side And 4 Radius Contours (1/4", 3/8", 1/2" And 5/8")..
No More Saving Small Pieces Of Plastic, Wood Or Even Cardboard. This Set Of Contour Grips And Flat Sanding Pads Is Designed Specifically To Get Into Those Hard To Reach Areas..
Features
- Throw away all the scrap pieces of stock laying around your shop. Instead, use these durable, flexible rubber grips that allow you to easily sand contours, curves, profiles, and other areas that are typically hard to get at.
- No more saving small pieces of plastic, wood or even cardboard. This set of contour grips and flat sanding pads is designed specifically to get into those hard to reach areas.
- All you have to do is cut your paper to size and instead of folding it to get that tough spot, wrap it around one of the contoured grips! Its that simple and that easy. Ideal for woodworkers, finishing, automotive refinishing, marine body work, arts, crafts or wherever you need to get into tight spots.
- This package includes 3 contour pads: 5-1/2 inches x 2-3/4 inches and 7/16,7/32,and 5/32 inch thick. The five grips have one 1 inch wide convex side and 4 radius contours (1/4, 3/8, 1/2 and 5/8).
- The opposite end of the contoured grips even have micro profiles for tighter areas such as flat, tight radii, knife edges, wedges and more.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon Similar To Peachtree Woodworking Supply 8 Piece
#1
Sili-Brush - Silicone Glue Brush (1" Tip) Glue Dries and Peels Off. Ideal for Wodworking, Arts, Crafts, Around The Home and Hobbyists. Tips Made from Silicone Rubber.
Asin: B009OCEBD2 | Model: 1203 | PartNumber: 1203 | Ean: 7131405093045, 0814310014820 | UPC: 814310014820
Once You Finish Applying Glue, Simply Rinse The Brush Head Off With Warm Soap And Water And You Are Ready To Re-Use The Sili Brush Again After It Dries. Another Way To Clean The Sili Brush Is To Let The Glue Dry Over Night On The Brush Tip And Then Peel The Glue Right Off Without Damaging The Brush. It’S Perfect For When We Are In A Rush Or Simply Just Forget To Clean The Brush. No More Throwing Away Brushes And No More Buying Huge Multipacks..
This Revolutionary Brush Makes Glue Up Project Fun And Enjoyable Without The Mess. Use The Sili Brush Over And Over Again Without Having To Purchase New Brushes. The Sili Brush Tip Is Made From Silicone Rubber For Easy Clean Up. The Tip Is Also Angled Just Right For Optimal Glue Application Regardless Of The Project..
The Handle Features A Comfortable Grip Shape For Extended Periods Of Use And It Also Features A Flat Paddle End With A Built In Rest. The Paddle Is Perfect For Applying Small Amounts Of Glue To Smaller Areas Like Wood Dovetail Or Box Joints. The Rest On The Paddle End Allows The Brush To Be Set Down Without Touching Your Table Top Surface..
Introducing The The Sili Brush! This Silicone Glue Brush Allows You To Apply Yellow Wood Or White School Glue Quickly And Easily With The Sili Brush Non-Stick Glue Brush. The Sili Brush Is Designed To Be Used Over And Over Again Without Having To Purchase Extra Brushes Like You Would With Typical Tin Acid Or Flux Applicator Brushes. The Silicone Bristles Make Applying Glue And Cleanup Of The Brush A Breeze..
Features
- We ve all used those pesky and irritating horse hair acid glue brushes to apply white school glue or yellow wood glue only to find out the bristles don t hold very well and the glue coverage is minimal. Not only that, we tend to keep buying more and more and more of these brushes just to use them once and throw them away.
- Introducing the the Sili Brush! This silicone glue brush allows you to apply yellow wood or white school glue quickly and easily with the SILI Brush non-stick glue brush. The SILI Brush is designed to be used over and over again without having to purchase extra brushes like you would with typical tin acid or flux applicator brushes. The silicone bristles make applying glue and cleanup of the brush a breeze.
- Once you finish applying glue, simply rinse the brush head off with warm soap and water and you are ready to re-use the SILI Brush again after it dries. Another way to clean the Sili brush is to let the glue dry over night on the brush tip and then peel the glue right off without damaging the brush. It s perfect for when we are in a rush or simply just forget to clean the brush. No more throwing away brushes and no more buying huge multipacks.
- The handle features a comfortable grip shape for extended periods of use and it also features a flat paddle end with a built in rest. The paddle is perfect for applying small amounts of glue to smaller areas like wood dovetail or box joints. The rest on the paddle end allows the brush to be set down without touching your table top surface.
- This revolutionary brush makes glue up project fun and enjoyable without the mess. Use the Sili brush over and over again without having to purchase new brushes. The Sili brush tip is made from silicone rubber for easy clean up. The tip is also angled just right for optimal glue application regardless of the project.
- See more on Amazon...
Brand: Sili | Manufacturer: Fulton Tools
Weight: 0.01 Pounds
See On Amazon #2
Fulton 4 inch Thumb Screw Key Adjustable 304 Stainless Steel Hose Clamps, Pipe Clamp, Worm Gear Clamps, Dryer Vent Clamp, Dust Collection, Automotive, RV Clamp 5 pack (4" Hose Clamp 5 Pack)
Asin: B07PDS9HG3 | Model: Varitaion Hose Clamps | PartNumber: Varitaion Hose Clamps | Ean: 0817918022099 | UPC: 817918022099
Often Used In These Applications – These Unique Clamps Are Typically Used In Securing Duct Work, Dryer Vents, Dust Collection Hoses, Piping, Large Cable, Pvc Tubing And More. Ideal For Use In Automotive, Industrial, Mechanical, Agriculture, Boat/Marine, Shield, Recreational Vehicles, Household And More. Works For Both Indoor Or Outdoor Use..
Flexible Adjustable Size Range- Each Hose Clamp Is Flexible And Workable With A Rather Wide Adjustable Size Range From Appx. 4-7/16” In Full Diameter Down To Appx. 3-7/16” At Its Most Compact Diameter For The 4" Hose Clamps, While The 5" To 6" Hose Clamps Range From 4-1/2" To 6-1/2" In Diameter..
304 Stainless Steel Hose Clamp- The Hose Duct Clamp (Including The Housing, The Band And The Internal Screw Are Made From Premium 304 Stainless Steel. This Makes The Clamp Strong, Durable And Rust Resistant Which Makes It Ideal For Many Applications In The Shop Or Around The Home..
Large Easy To Turn Key - The Easy To Turn And Easy To See Blue Key Is Made From A Strong And Durable Polymer. The Key Is Designed To Make The Securing And Un-Securing Of Hose Much Easier On The Knuckles. No More Knuckle Busting Flat Head Screw Drivers Or Tiny Socket Wrenches. Simply To Turn The Key Clockwise To Tighten, Counter Clockwise To Loosen..
Features
- NO MORE TOOLS! Set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. Place the clamp where its needed then simply turn the key to loosen or tighten them.
- LARGE EASY TO TURN KEY - The easy to turn and easy to see blue key is made from a strong and durable polymer. The key is designed to make the securing and un-securing of hose much easier on the knuckles. No more knuckle busting flat head screw drivers or tiny socket wrenches. Simply to turn the key clockwise to tighten, counter clockwise to loosen.
- OFTEN USED IN THESE APPLICATIONS These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use.
- 304 STAINLESS STEEL HOSE CLAMP- The hose duct clamp (including the housing, the band and the internal screw are made from premium 304 stainless steel. This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home.
- FLEXIBLE ADJUSTABLE SIZE RANGE- Each hose clamp is flexible and workable with a rather wide adjustable size range from appx. 4-7/16 in full diameter down to appx. 3-7/16 at its most compact diameter for the 4 hose clamps, while the 5 to 6 hose clamps range from 4-1/2 to 6-1/2 in diameter.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #3
Micro-Mesh 2 inch by 2 inch Double Sided Soft Touch Sanding Pads Ideal for Pen and Bottle Stopper Polishing. Perfect for Cycle Sanding Acrylic Materials with CA Glue Finish
Asin: B000H6EC4C | Model: STP-01 | PartNumber: STP-01 | Ean: 5915903721486, 4049933039516, 0810948010517 | UPC: 810948010517
The Pack Includes 1 Each 2 Inch By 2 Inch Soft Touch Pads In The Following Grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 Plus A Color Coded Grit Guide..
Pads Are Colored Coded With Foam Backing For Easy Grit Identification. Colors May Vary From Images Shown Here. The Colors On The Grit Chart And The Colors Of Micro-Mesh Abrasives May Vary Slightly Due To Color Shifts In The Manufacturing Process..
Ideal For Use With Acrylics, Plastics, Resin Or Impregnated Blanks When Turning. Works Great On Automotive And Marine Body Work. The Pads Can Also Be Used Around The Home For Fine Repair Work..
This Pack Works Extremely Well When Working With Ca Finishes Leaving Your Work Looking Like It Was Done By A Professional! Using The Step Up Process Will Leave Your Project Finish Looking Wonderful ..
Features
- Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit.
- This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful .
- The pack includes 1 each 2 inch by 2 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide.
- Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work.
- Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process.
- See more on Amazon...
Brand: Micro-Mesh | Manufacturer: Micro-Surface
Dimensions: 2.00 x 2.00 x 2.00 Inches | Weight: 0.02 Pounds
See On Amazon #4
Interstate WoodWorks Beeswax Paste Wood Finish & Polish - 6.25 oz.- Cutting Board Sealer - Made in America
Asin: B07PWN1VWD | Model: 0-G | PartNumber: 0-G | Ean: 0860000493208 | UPC: 860000493208
Large 6.25 Oz Container For Plenty Of Surface Coverage. 8 Ounce Jar Volume Or 236 Milliliters..
Also A Great Metal Polish...🇺🇸.
Proudly Made In The Usa.
Adds New Life To Old Faded Wood Finish.
Each Jar Is Hand Mixed In Small Batches To Ensure The Highest Quality Finished Product.
Features
- Interstate Beeswax is an All Natural, Wood Finish, Wood Sealer and Non-Toxic wax
- Each jar is Hand Mixed in Small Batches to ensure the highest quality finished product
- Large 6.25 oz Container for plenty of surface coverage. 8 ounce jar volume or 236 milliliters.
- Adds New Life to Old Faded Wood Finish
- Also a Great Metal Polish...
- Proudly Made in The USA
- See more on Amazon...
Brand: interstate woodworks | Manufacturer: interstate woodworkis
Weight: 0.39 Pounds
See On Amazon #5
Peachtree Woodworking Supply Cleaning Eraser Stick Small 1-1/2" x 1-1/2" x 7-7/8" Made from Natural Rubber for Removing Dust and Build up from Abrasive Belts Sanding Discs Drum Sanders Grip Tape
Asin: B000H69U7G | Model: 187 | PartNumber: 187 | Ean: 0810948010838 | UPC: 810948010838
It Works Almost Like An Old Fashioned Pencil Eraser. As You Rub Or Slide The Stick Across An Abrasive Surface The Stick Quickly Loosens And Removes Foreign Materials. Your Abrasives Will Be Brought Back To Life To Continue Sanding. If You Have Power Sanders Like Belt Sanders You Can Simply Hold The Stick Up Against The Sanding Belt While The Power Is On And Watch The Belt Be Cleaned Right Before Your Eyes!.
The Natural Rubber Cleaning Eraser Stick Also Works Exceptionally Well On Skateboard Grip Surfaces Which Tend To Get Dirty Rather Quickly. Once Clean, The Skateboard Surface Is Almost As Good As New And Keeps Its Grip A Whole Lot Longer. Similar To Skateboard Grip Surfaces, Abrasive Or Grip Tape That’S Used On Floor Areas That Can Get Slippery Can Be Easily Cleaned Using The Eraser Stick..
Clean Various Items Around The House, Workshop Or In The Garage. The Rubber Construction Of The Stick Works Best On Belt Sanders To Allow Your Belts To Cut Faster And Last Longer All The While It Can Also Be Used On Disc Sanders, Drum Sanders, Rubber Bottom Shoes (Not Plastic), Skateboard Grip Tape, Grip Tape And A Whole Lot More!.
The Natural Rubber Cleaning Eraser Stick Removes Most All Of The Residue. Use Stick After Your Sander Has Been Clogged With Wood Dust And/Or Wood Resin To Return The Sanding Surface To A Like-New Condition; Pulls Dust, Wood Particles, Sap, Metal Shavings, Paint, And Other Residue Out Of Sanders And Other Abrasive Materials..
Features
- Sanding most anything is a chore that we all don t typically care to do. To make things worse, the sandpaper seems to become useless just after a few strokes. What if you could rejuvenate your sandpaper so you could get a whole lot more mileage out of it? Now you can with our natural rubber cleaning eraser stick! Simply rub the stick across the abrasive surface and watch the dust, crud, resin and natural build up disappear!
- The natural rubber cleaning eraser stick removes most all of the residue. Use stick after your sander has been clogged with wood dust and/or wood resin to return the sanding surface to a like-new condition; Pulls dust, wood particles, sap, metal shavings, paint, and other residue out of sanders and other abrasive materials.
- It works almost like an old fashioned pencil eraser. As you rub or slide the stick across an abrasive surface the stick quickly loosens and removes foreign materials. Your abrasives will be brought back to life to continue sanding. If you have power sanders like belt sanders you can simply hold the stick up against the sanding belt while the power is on and watch the belt be cleaned right before your eyes!
- Clean various items around the house, workshop or in the garage. The rubber construction of the stick works best on belt sanders to allow your belts to cut faster and last longer all the while it can also be used on disc sanders, drum sanders, rubber bottom shoes (not plastic), skateboard grip tape, grip tape and a whole lot more!
- The natural rubber cleaning eraser stick also works exceptionally well on skateboard grip surfaces which tend to get dirty rather quickly. Once clean, the skateboard surface is almost as good as new and keeps its grip a whole lot longer. Similar to skateboard grip surfaces, abrasive or grip tape that s used on floor areas that can get slippery can be easily cleaned using the eraser stick.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 0.57 Pounds
See On Amazon #6
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
Asin: B087XWCV61 | Model: 11567 | PartNumber: 11567 | Ean: 0817918022532 | UPC: 817918022532
The Head Is Mounted To A Solid Steel Miter Bar That Measure 18” In Length And Is .354” Thick By .730” Wide. Standard Miter Slots Are 3/4” X 3/8” With A 1/8” “T” Slot (Slight Variances From Brand To Brand) Running The Length On The Bottom Of The Slot. The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through..
Both Ends Of The Fence Are Cut At Exactly 45 Degrees. This Allows You To Position The Fence Extra Close To The Saw Blade (With The Power Turned Off) So You Have Even More Control Over The Workpiece You Are Cutting. The Fence Comes With A Flip Stop That Makes Repetitive Cuts A Breeze. When Not In Use The Flip Stop Can Be Flipped Up And Out Of The Way. Also Include Are Two Sticky Back Measuring Tapes. 1 Tape Is Left To Right Reading And The Other Is Right To Left Reading..
Made From A Single Piece Of Extruded Aluminum, This Precision Miter Gauge Fence Is Not Only Durable, Its Accurate And Saves Setup Time. The Fence Is Designed To Be Used With Most Any Miter Gauge With Its Off-Set Mounting Track On The Back Of The Fence. The Off-Set Track Allows You To Flip The Fence For Lower Profile Miter Gauge Mounts And Flip Back For Standard Height Miter Gauges. The Fence Can Be Mounted To Older Miter Gauges By Adding A Wooden Block Mount With Wooden Screws If Necessary..
The .200” Thick, Adjustable, Solid Aluminum Head Is Machined With 13 Positive Stop Holes. 1 Hole Is At 90 Degrees While The 6 Holes On Both Sides Are At 22.5, 30, 45, 60, 67.5 And 90 Degrees. The Positive Stops Are Perfect For Many Woodworking Projects As They Are The Angles That Are Typically Used.To Adjust The Head You Simply Loosen The Post Knob Handle, Pull The Spring Loaded Indexing Pin Outward, Rotate The Head To The Desired Position, Release The Pin And Lock Into Place..
Features
- The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
- The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
- The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 3/4 x 3/8 with a 1/8 T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through.
- Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
- Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools Inc.
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 2.50 pounds
See On Amazon #7
Peachtree Woodworking Supply Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4" x 3/8" Miter Slots Also Works with Many Router Tables and Band Saws
Asin: B0048J720U | Model: 3096 | PartNumber: 3096 | Ean: 0814310011034 | UPC: 814310011034
Making Your Thin Rip Cuts In This Fashion Allows You To Cut Wider Boards Down Without Getting Your Fingers In Harms Way By Keep Them Away From The Blade Or Cutter.The Thin Rip Works Much Like A Feather Except That It Doesn’T Exert Spring Like Pressure Against The Board. This Means It Can Be Used To Make Accurate, Repetitive Cuts Since It’S Essentially Just Holding Its Spot Once It Is Secured..
The Jig Can Be Used On Other Workshop Machinery Like Router Tables With Fences And Band Saws For Re-Saw Applications. In Certain Cases, When Working With Larger Or Longer Stock On Table Saws Or Router Tables, We Recommend Using Two Thin Rip Jigs Behind The Blade Or Cutter For Extra Stability When Feeding Your Stock Through..
The Thin Rip Jig Has A Roller Guide Bearing On The Tip To Make Feeding Your Stock Through An Easy And Smooth Moving Process. The Free Rotating Bearing Is Made From High Quality Materials For Extended Workshop Use. The Jig Fits Directly Into Most Any Standard 3/8” X 3/4” Miter Slot. The Body Is Made From A Solid Piece Of Aluminum And Is Adjustable Inward And Outward From Your Fence Depending On The Width Of Your Stock..
The Thin Rip Jig Acts Kind Of Like A Third Hand Behind The Blade Or Cutter. With The Saw Unplugged Simply Measure From The Outside Of Of The Blade Toward The Tip Of The (Guide Roller) Thin Rip Jig For The Width Cut You Want To Make. Once Set, Secure The Thin Rip Jig Simply By Rotating The Large, Easy To Grip Star Shaped Knob. After Your First Cut, Reset Your Stock Behind The Blade And Slide The Fence Over So Your Stock Piece Is Touching The Guide Roller On The Thin Rip Jig. Lock The Fence..
Features
- Making repetitive cuts on your table saw is a pretty straight forward process. Set your fence and feed each stock piece through the blade to achieve the same size each and every time. What if you need a series of narrow cuts that are about an 2 inches or less in width? Doing this can get tricky since you cant get your hands safely between the blade and the fence. You could always reverse measure and keep the off fall piece, but without a guide of some sort that can be inaccurate.
- The Thin Rip Jig acts kind of like a third hand behind the blade or cutter. With the saw unplugged simply measure from the outside of of the blade toward the tip of the (guide roller) Thin Rip Jig for the width cut you want to make. Once set, secure the Thin Rip Jig simply by rotating the large, easy to grip star shaped knob. After your first cut, reset your stock behind the blade and slide the fence over so your stock piece is touching the guide roller on the Thin Rip Jig. Lock the fence.
- Making your thin rip cuts in this fashion allows you to cut wider boards down without getting your fingers in harms way by keep them away from the blade or cutter.The Thin Rip works much like a feather except that it doesn t exert spring like pressure against the board. This means it can be used to make accurate, repetitive cuts since it s essentially just holding its spot once it is secured.
- The Thin Rip Jig has a roller guide bearing on the tip to make feeding your stock through an easy and smooth moving process. The free rotating bearing is made from high quality materials for extended workshop use. The jig fits directly into most any standard 3/8 x 3/4 miter slot. The body is made from a solid piece of aluminum and is adjustable inward and outward from your fence depending on the width of your stock.
- The jig can be used on other workshop machinery like router tables with fences and band saws for re-saw applications. In certain cases, when working with larger or longer stock on table saws or router tables, we recommend using two thin rip jigs behind the blade or cutter for extra stability when feeding your stock through.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 3.00 x 4.00 x 3.00 Inches | Weight: 1.25 pounds
See On Amazon #8
Fulton 6 inch Long Forstner Bit Extension for Adding Over 5-5/8 inches of Drilling Depth to Your Forstner Bit. for Wood Turners, Furniture, Carpentry and Construction
Asin: B003UO7Y98 | Model: 927 | PartNumber: 927 | Ean: 0810948014492 | UPC: 810948014492
One Of The Most Common Uses For The Forstner Bit Extension Is For Woodturners Who Need To Bore Out Starter Holes On Larger Vessels. However, The Extension Works Exceptionally Well For Projects Like Salt Shakers, Pepper Mills Or Even Wood Turned Beverage Mugs. Contractors Use The Extension When They Need To Bore Deep Holes For Running Cables Or Wires And They Also Use It For Joining Larger Timbers..
The Collet Outside Diameter Is 25/32 Inch Without The Set Screws Protruding Outward. The Reason This Is Important Is That As We Mentioned Earlier, Some Bits May Have Slightly Different Shank Sizes. This Means The Set Screws May Protrude Outwardly From The Collet. The Minimum Size Hole This Extension Will Allow You To Drill Is 13/16 Inch. Forstner Bits And Machinery Shown In Pictures Are Not Included..
The Forstner Bit Extender Is Made From Solid, Heavy Duty Machined Steel. It Is Designed To Be Used With Forstner Bits Only. The Collet Inside Diameter Is 3/8 Inch. This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller. Please Note That Some Forstner Bit Manufacturers Produce Bits That Say 3/8 Inch Shank Size When In Fact They Are Not. If You Measure Your Bit Shank And It Is 3/8 Inch, Your Bit Should Fit Once The Set Screws Are Loosened.
The Forstner Bit Extension Gives You Additional 5-5/8 Inches Of Reach To Bore Deeper Into Your Projects. This Will Help You Create Larger Diameter Starter Holes Or Help When You Need To Drill In Just A Little Further Than The Standard Bit Length Will Allow. The Extension Can Be Used With Forstner Bits On Drill Presses, Lathes With A Drill Chuck Installed (Drill Chuck Not Included) Or With A Power Drill..
Features
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
- The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
- One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
- The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
- The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #9
5" x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!
Asin: B07VYNDXTV | Model: 6171 | PartNumber: 6171 | Ean: 0817918022310 | UPC: 817918022310
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Typically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- Typically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
Dimensions: 0.04 x 120.00 x 5.00 Inches
See On Amazon #10
Peachtree Woodworking Supply Pro Grind Sharpening System for 8 Inch Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges Includes Setup Blocks and Quad Jig for 8 inch Grinders
Asin: B01HDEJGLE | Model: 7575 | PartNumber: 7575 | Ean: 0814310018552 | UPC: 814310018552
The Pro Grind Tool Rest Bar Attachment Offers You The Best Possible Way To Achieve A Precise Edge To Your Bevels Without Taking Of Too Much Material Off Of Your Tool. After All, We Need Our Tools To Last A Long Time, So Why Would You Want To Take Off To Much At A Time? The Tool Rest Bar Is Ideal For Sharpening Curved, Even Bevel Edges That Are Typically Used On Spindle And Roughing Gouges..
The Pro Grind Sharpening System Also Comes With A Number Of Setup Jigs And Accessories To Help In The Setup Process To Sharpen Your Tools To The Proper And Repeatable Angles. From The Built-In Projection Gauge On The Multi-Grind Arm To The Magnetic Micro Bevel Setup Block You’Ll Be Able To Achieve Consistent Repeatable Angles And Produce Excellent Results Each And Every Time You Use The Pro Grind Sharpening Jig System..
The Large, 3” X 5” Slotted Platform Is The Ideal Way To Sharpen Flat Edged Tools Like Wood Turning Skews, Chisels And Hand Plane Irons. The Platform Has A Slot Milled Horizontally Through It So It Can Accept The Included Tool Holder. The Tool Holder Is Designed To Keep Your Tools At The Correct Angle While Being Able To Slide Side To Side During The Sharpening Process..
The Included And Versatile Multi-Grind Jig Will Correctly Shape The Edge On Bowl Gouges, Side Grinds (Aka Ellsworth Grind, Liam O’Neil Grind/Irish Grind) Or Fingernail Grinds For Spindle Work And Detailing. Not Only Will It Correctly Shape Your Tools, You Will Also Be Able To Repeat The Process To Produce Consistent Results Every Time. The Multi-Grind Jig Is Designed To Be Used With The Included Multi-Grind Arm On The Pro Grind Sharpening System And Will Accept Tools Up To 1.125” In Diameter..
Features
- Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately
- The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125 in diameter.
- The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.
- The large, 3 x 5 slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process.
- The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply
Dimensions: 30.00 x 9.00 x 4.00 Inches
See On Amazon #11
FastCap Peel & Stick Standard/Metric Measuring Tape - Perfect for Professionals and Home Improvement - Ideal for Layout & Cutting Stations - 16' Length, 7/8" Width - 01063
Asin: B00H2AFR3Q | Model: PMS-STICK_16 | PartNumber: PMS-STICK_16 | Ean: 0663807010636 | UPC: 663807010636
Effortless Application - The Included Speedtape Makes Installation A Breeze. Simply Adhere It To One Side Of The Tape Measure And Stick It On Any Flat Surface. Ideal For Table Saws, Chop Saw Stations, And Layout And Cutting Stations..
Fastcap Excellence - Fastcap Is A Company Known For Its Innovative Solutions In The Cabinet-Making And Woodworking Industry Since It Was Founded In 1997. With A Wealth Of Experience Spanning Over Two Decades, Fastcap Had Established Itself As A Veteran In.
Peel And Stick - The Pms-Stick 16' Tape Measure Puts A Tape Rule Right Where You Need It. The Tape Measure Is Printed On Both Sides Allowing For Left Or Right Read. Simply Just Adhere The Speedtape To One Side Of The Tape And Stick It On!.
Dual-Sided Print - This 16' Long Tape Measure Is Printed On Both Sides, Allowing For Easy Left Or Right Reading. No Matter Your Preference, The Measurements Are Readily Available..
Features
- Versatile Convenience - The Peel & Stick tape measure provides a handy tape rule right where you need it. No more fumbling around for a tape measure when you're in the middle of a project.
- Dual-Sided Print - This 16' long tape measure is printed on both sides, allowing for easy left or right reading. No matter your preference, the measurements are readily available.
- Effortless Application - The included SpeedTape makes installation a breeze. Simply adhere it to one side of the tape measure and stick it on any flat surface. Ideal for table saws, chop saw stations, and layout and cutting stations.
- Peel and Stick - The PMS-Stick 16' tape measure puts a tape rule right where you need it. The tape measure is printed on both sides allowing for left or right read. Simply just adhere the SpeedTape to one side of the tape and stick it on!
- FastCap Excellence - FastCap is a company known for its innovative solutions in the cabinet-making and woodworking industry since it was founded in 1997. With a wealth of experience spanning over two decades, FastCap had established itself as a veteran in
- See more on Amazon...
Brand: FastCap | Manufacturer: Fastcap, LLC
Dimensions: 1.15 x 7.25 x 5.55 Inches
See On Amazon #12
Peachtree Woodworking Supply Adjustable Replacement Tool Rest Sharpening Jig for 6 inch or 8 inch Bench Grinders and Sanders Includes a Pivoting Miter Slide and Flat Miter Slide for Easy Tool Honing
Asin: B0049RD9YO | Ean: 0810948016403 | UPC: 810948016403
The Sharpening Jig Can Be Used With 6" Or 8" Bench Grinders And On Many Belt Sanders/Grinders. It Quickly And Easily Mounts Directly To The Bench In Front Of The Grinder With A Track Style Base And Can Be Readily Folded Out Of The Way For Freehand Grinding If So Desired. It Can Also Be Completely Removed By Loosening The Large Wing Knob And Sliding The Jig From The Track Base..
The Unique Ratcheting Handles Lock The Adjustable Rest Solidly In Position And Can Be Moved Out Of The Way After Locking To Keep From Accidentally Bumping Them. You Can Easily Move The Tool Rest From One Grinder Wheel To Another Or Quickly Remove It From The Bench When Not Needed For Grinding. Some Assembly Required. The Bench Top Wood Mounting Screws Are Included..
Another Great Feature Is That The Jig Can Be Adjusted Forward And Backward For Just The Right Angle. Some Aftermarket And Expensive Tool Rests Don’T Move And Adjust In This Fashion. This Can Be Very Limiting Your Ability To Be Accurate With Your Angles. The Platform Straddles Wheels Up To 1" Wide. The Jig Also Now Includes Internal Lock Washer For Even More Stability!.
The Sharpening Jig Works With Most Power Or Hand Grinders That Has Or Had A Tool Rest. It Is The Ideal Replacement For The Factory Tool Rest That Comes With Many Bench Grinders. The Jig Offers Much More Flexibility In Terms Of What You Can Get Done Than With The Standard Factory Tool Rest. The Plate Is Offset For Short Chisels, Such As Japanese Or Western Butt Chisels..
Features
- The Adjustable Replacement Tool Rest Sharpening Jig will allow you to locate all the basic sharpening positions with your bench grinder (grinder not included). The unique miter slide tool holder design allows the jig to be used more or less as a stone, which easily guides your blades, turning tools and chisels. Solid aluminum construction provides you with a smooth sliding, side to side action when sharpening.
- The sharpening jig works with most power or hand grinders that has or had a tool rest. It is the ideal replacement for the factory tool rest that comes with many bench grinders. The jig offers much more flexibility in terms of what you can get done than with the standard factory tool rest. The plate is offset for short chisels, such as Japanese or western butt chisels.
- The Sharpening jig can be used with 6 or 8 bench grinders and on many belt sanders/grinders. It quickly and easily mounts directly to the bench in front of the grinder with a track style base and can be readily folded out of the way for freehand grinding if so desired. It can also be completely removed by loosening the large wing knob and sliding the jig from the track base.
- Another great feature is that the jig can be adjusted forward and backward for just the right angle. Some aftermarket and expensive tool rests don t move and adjust in this fashion. This can be very limiting your ability to be accurate with your angles. The platform straddles wheels up to 1 wide. The Jig also now includes internal lock washer for even more stability!
- The unique ratcheting handles lock the adjustable rest solidly in position and can be moved out of the way after locking to keep from accidentally bumping them. You can easily move the tool rest from one grinder wheel to another or quickly remove it from the bench when not needed for grinding. Some assembly required. The bench top wood mounting screws are included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Weight: 1.20 pounds
See On Amazon #13
Yorkshire Grit Original for Woods and Resins
Asin: B0BFXTWXGN | Model: YG110 | PartNumber: YG110 | Ean: 0811269021459 | UPC: 811269021459
Please Shop The Complete Line Of Easy Wood Tools And Accessories On Our Amazon Store – Just Click On Visit The Easy Wood Tools Store Listed Right Under The Title Of This Product.
The Result Is A Creamy Paste That Acts Like “Liquid Sandpaper” Which Reduces Scratches Left Behind By Lower Grit Dry Sanding, And Eliminating Fine Dust Produced By Higher Grit Sanding.
Applying A Sanding Sealer Prior To Use With Our Product Is Recommended.
Features
- The grinding powders we use are designed to break down to a finer mesh as they are used, while still maintaining a cutting edge, so as the friction reduces the mesh size of the grit it is effectively forming a finer abrasive
- Applying a sanding sealer prior to use with our product is recommended
- Please shop the complete line of EASY WOOD TOOLS and accessories on our AMAZON STORE just click on Visit the Easy Wood Tools Store listed right under the TITLE of this product
- The result is a creamy paste that acts like liquid sandpaper which reduces scratches left behind by lower grit dry sanding, and eliminating fine dust produced by higher grit sanding
- See more on Amazon...
Brand: Yorkshire Grit | Manufacturer: Easy Wood Tools
Dimensions: 1.75 x 4.00 x 4.00 Inches | Weight: 0.50 pounds
See On Amazon #14
Peachtree Woodworking Supply ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots (All 3 Clamps 24, 36 and 50 inch)
Asin: B07L18YFVC | Model: SUVELAM | PartNumber: SUVELAM | Ean: 0810948017516 | UPC: 810948017516
Each Clamp Rail Is Manufactured With A Low Profile To Make Guiding Your Power Tool Along The Edge Much Easier. The Low Profile Has Also Been Designed With Guide Accessories In Mind. The Clamp Rails Accept Many Different Accessories (Sold Separately) Or Can Create Your Very Own Jigs And Fixtures To Use With The Progrip Straight Edge Guides. Each Progrip Straight Edge Guide Has The Exact Same Profile Regardless Of Length..
The Lock Lever On Each Clamp Can Be Secured Into One Of Three Positions, Each Position Provides Varying Amounts Of Pressure. Depending On Your Project Or Application, You May Need To Apply More Pressure By Securing The Lock Lever To The Appropriate Position. Once Secured, The Progrip Straight Edge Guide Clamp Is Designed To Have Zero Side To Side Play With Minimal Deflection To Provide You With The Ideal Straight Edge To Make Clean, Smooth Cuts Every Time!.
How Does It Work? Each Progrip Straight Edge Guide Clamp Has One Adjustable Jaw And One Fixed Jaw. The Fixed Jaw Typically Will Go Against The Edge Of The Board Closest To You. Once You Place The Clamp On Your Board With The Fixed Jaw Over The End, The Adjustable End Gets Drawn In Against The Opposite Side Of The Board. Once Set And Aligned, You Secure The Clamp By Simply Locking It Down With The 3 Position Lock Lever..
Cut Straight, True Lines With Circular Saws, Routers, Trim Routers, Jig Saws And Many Other Power Tools You Probably Own. These Clamps Are Ideal For Cutting Large Sheets Of Plywood In Half (With A 50” Straight Edge Guide). Each Clamp Is Identified By The Maximum Clamping Distance Between Jaws. Another Great Application For These Clamps Is Cutting Dado Slots For Bookshelves. The Alignment And Cutting Process For Dados Is So Much Easier Than Ever Before With The Progrip Straight Edge Guides..
Features
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50 straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: ProGrip
Weight: 10.54 Pounds
See On Amazon #15
Peachtree Woodworking Supply 2 Pack of 4 Way Pressure Clamps For Clamping Panels - Using Pressure From All Four Directions. For Woodworkers, Cabinet and Furniture Makers (2 four way pressure clamps)
Asin: B073QSF8JR | Model: 666 | PartNumber: 666
Build Any Length Clamp With The Durable Plastic Bars With 4 Notches For Maximum Adjustability To Handle A Variety Of Stock Widths. Clamp Can Be Used For Boards Up To 6 Inches In Thickness By Simply Adjusting The Clamp Width Capacity With The Appropriate Number Of Notches. Turn The Handle Clockwise To Tighten The Clamp And Turn The Handle Counter Clockwise To Release Pressure. The 4 Way Pressure Clamp Is Equipped With Side Pressure Pads To Prevent Damaging Your Stock..
This Clamp Package Comes With Two Full 4 Way Pressure Clamp Assemblies. Includes: 2 Each Rotating Handle Assemblies, 2 Each Tailstock Assemblies, 4 Each Side Pressure Pads And 12 Each 4 Notch Bars. Together, This Setup Will Allow You To Create Two 4 Way Pressure Clamps. More Than One Clamp Is Generally Recommended For Any Project Over 12” In Length. Wood Is Required For Setting Up The Clamp. Wood Is Not Included..
Now You Can Confidently Glue Up Wide Boards, Shelving, Table Tops, And More Up To 6” Thick. To Setup The Clamps Simply Attach The Clamp To Any Length 2 X 2’S (2” X 4” Ripped In Half) With The The Wood Screws That Are Provided, Apply Wood Glue To Your Project, Set The Clamps On To Your Panel Boards And Turn Handle To Tighten The Clamp On All Four Sides. We Recommend That You Place A 4 Way Pressure Clamp Every 12” To 18” For Best Results..
Let’S Make Racked Panel Glue Ups A Thing Of The Past! The Uniquely Designed 4 Way Pressure Solves This Age Old Issue By Applying Pressure To All Four Sides Of Your Panel Glue Up. With A Simple Turn Of The Rotating Clamp Handle, All Four Sides Of The Clamp Will Draw Inward At The Same Time. This Provides Equal Pressure On To Your Panel And Prevents Bowing, Buckling, Or Racked Panels..
Features
- Clamping panels can certainly be a challenge. Especially when we try to use everyday pipe clamps or bar clamps. While these types of clamps work fairly well on certain glue up projects, the one thing they don t do at all is apply pressure from the top and bottom of the panels during glue up. In fact, with all the pressure being applied on both sides, bar and pipe clamps will almost certainly bow, buckle or rack your panel glue up project.
- Let s make racked panel glue ups a thing of the past! The uniquely designed 4 way pressure solves this age old issue by applying pressure to all four sides of your panel glue up. With a simple turn of the rotating clamp handle, all four sides of the clamp will draw inward at the same time. This provides equal pressure on to your panel and prevents bowing, buckling, or racked panels.
- Build any length clamp with the durable plastic bars with 4 notches for maximum adjustability to handle a variety of stock widths. Clamp can be used for boards up to 6 inches in thickness by simply adjusting the clamp width capacity with the appropriate number of notches. Turn the handle clockwise to tighten the clamp and turn the handle counter clockwise to release pressure. The 4 way pressure clamp is equipped with side pressure pads to prevent damaging your stock.
- Now you can confidently glue up wide boards, shelving, table tops, and more up to 6 thick. To setup the clamps simply attach the clamp to any length 2 x 2 s (2 x 4 ripped in half) with the the wood screws that are provided, apply wood glue to your project, set the clamps on to your panel boards and turn handle to tighten the clamp on all four sides. We recommend that you place a 4 way pressure clamp every 12 to 18 for best results.
- This clamp package comes with two full 4 way pressure clamp assemblies. Includes: 2 each rotating handle assemblies, 2 each tailstock assemblies, 4 each side pressure pads and 12 each 4 notch bars. Together, this setup will allow you to create two 4 way pressure clamps. More than one clamp is generally recommended for any project over 12 in length. Wood is required for setting up the clamp. Wood is NOT included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc..
Weight: 9.15 Pounds
See On Amazon #16
Snappy Tools Quick-Change 5-Pc. Countersink Drill Bit Set. Proudly Made in The USA.
Asin: B000XXZME8 | Model: 40030 | PartNumber: 40030 | Ean: 5915903786669, 0787721610090, 0735090674038, 0762234400307, 0043968596710 | UPC: 735090674038, 787721610090, 043968596710, 762234400307
Ideal For Plugs Or Dowel Buttons. The 1/4" Hex Shank Can Be Used With Power Drills And Quick-Change Chucks..
Made In Usa By Snappy; Includes 5 Gold Screw Countersinks: 5/64X3/8, 3/32X3/8, 7/64X3/8, 1/8X3/8 & 9/64X1/2.
Experience The Higher Quality Of Snappy Tools. Combining Higher Quality Materials And Patented Technology, Snappy Delivers Industrial Quality Tools To The Tradesman And Do-It-Yourself Markets At An Affordable Price..
Snappy Tools Countersinks Will Drill The Pilot Hole And Countersink Or Counter-Bore For Screws In One Step. Countersink To Drive The Head Of The Screw Flush With Or Slightly Below The Surface.
Features
- In one step, you can drill, countersink and counter bore the perfect sized hole for #4, #6, #8, #10, or #12 screws.
- Snappy Tools Countersinks will drill the pilot hole and countersink or counter-bore for screws in one step. Countersink to drive the head of the screw flush with or slightly below the surface
- Ideal for plugs or dowel buttons. The 1/4 hex shank can be used with power drills and quick-change chucks.
- Experience the higher quality of Snappy Tools. Combining higher quality materials and patented technology, Snappy delivers industrial quality tools to the tradesman and do-it-yourself markets at an affordable price.
- Made in USA by Snappy; Includes 5 Gold Screw Countersinks: 5/64x3/8, 3/32x3/8, 7/64x3/8, 1/8x3/8 & 9/64x1/2
- See more on Amazon...
Brand: Make it Snappy | Manufacturer: Make it Snappy
Dimensions: 0.80 x 8.50 x 5.65 Inches | Weight: 0.00 Pounds
See On Amazon #17
Peachtree Woodworking Supply Paint and Finish Strainer Stand for Strainer Cone Funnels, Ideal for Home, Contractors, Automotive and Woodworkers. Lightweight Sturdy Construction, 1 Paint Strainer Stand
Asin: B00A1Q0P9E | Model: PT4218 | PartNumber: PT4218 | Ean: 0814310014073 | UPC: 814310014073
The Lightweight But Sturdy Rod Steel Stand Has A Large 9" X 8" Open Base For Great Stability And The Base Is Just The Right Size To Fit A Full Size Gallon Paint Can Into It. The Base Sits Underneath The 4” Round Upper Opening. The Top Opening Makes It Easy To Align Your Can Or Container For Straining Your Paints And Finishes..
A Unique Feature Of The Fulton Paint Strainer Stand Is That It Is Two Separate Pieces. It Is Easily Assembled With The Included 4 Set Screw Sleeve. This Makes The Stand Super Easy To Assemble Or Dis-Assemble For Quick And Convenient Storage. Paint Strainer Cones Are Not Included..
Made From ¼” Rod Steel, The Stand Is Perfect For Handling Paint Straining Cones And Won’T Allow The Cones To Fall Through The Opening When Pouring. Perfect For Professionals And Beginners, The Paint Strainer Stand Can Be Used In Woodworking, Automotive, Contractor Or Even Diy Applications..
This Uniquely Designed Stand Is The Perfect Solution For Painters And Finishers! The Stand Keeps Your Strainer Neatly Perched Above The Paint Can Or Container So You Can Have Both Hands Free. This Allows You To Use Both Hands On The Can So You Can Pour Your Paint Of Finish Into The New Container With Complete Control..
Features
- If you have ever struggled to keep your lightweight cone filters from falling into paint cans or containers when straining paint or finish, then you know how valuable a holder or stand can be. Even more so, the right strainer stand makes all the difference. Having a stand that works with smaller quart sizes as well as full size gallons is an absolute must.
- This uniquely designed stand is the perfect solution for painters and finishers! The stand keeps your strainer neatly perched above the paint can or container so you can have both hands free. This allows you to use both hands on the can so you can pour your paint of finish into the new container with complete control.
- The lightweight but sturdy rod steel stand has a large 9 x 8 open base for great stability and the base is just the right size to fit a full size gallon paint can into it. The base sits underneath the 4 round upper opening. The top opening makes it easy to align your can or container for straining your paints and finishes.
- Made from rod steel, the stand is perfect for handling paint straining cones and won t allow the cones to fall through the opening when pouring. Perfect for professionals and beginners, the paint strainer stand can be used in woodworking, automotive, contractor or even DIY applications.
- A unique feature of the Fulton Paint Strainer Stand is that it is two separate pieces. It is easily assembled with the included 4 set screw sleeve. This makes the stand super easy to assemble or dis-assemble for quick and convenient storage. Paint strainer cones are NOT included.
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
Dimensions: 9.00 x 8.00 x 0.01 Inches
See On Amazon #18
Peachtree Woodworking 4" x 10' (4 inch diameter by 10 feet long) Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!
Asin: B0013EOTRW | Model: 375 | PartNumber: 375 | Ean: 0810948014041, 0798167706773 | UPC: 810948014041, 798167706773
Pvc Hose (Depending On Diameter) Can Be Used With Dust Collectors, Shop Vacuums, Industrial Vacuum Systems, Lawn Tractor Leaf Catchers And A Whole Lot More! Simply Make Sure Both Ends Of The Hose Are Secured With Hose Clamps And Your Ready To Go. The Pvc Hose Flexes Enough To Weave In And Out Of Shop Machinery Or Table Legs Without Kinking. Its Also Sturdy Enough That It Won’T Flatten Out When The Dust Collector Is Turned On. The Hose Has A Compression Ratio Of 3: 1..
While Pvc Hose Can Be Used On Other Machinery Or Devices It Has Been Designed For Dust Collection Purposes. The Hose Temperature Range Is -20° F To 165° F Which Is Ideal For Indoor Use Like In A Woodworking Or Workshop Environment. The Clear Hose Wraps Around A Black Carbon Steel Wire Helix That Reinforces The Hose To Keep It From Kinking And Is Capable Of An Electrostatic Discharge When Properly Grounded At Both Ends Of The Hose..
This Pvc Hose Is Clear Which Allows You To See What’S Going On Inside The Hose While The Dust And Debris Are Flowing Through It. Not Only Can You See The Dust And Debris, You Can Also See If Any Build Up Or Blockage Has Occurred. Being Able To See This Makes Fixing Any Suction Issues With The Hose Much Easier Than Typical Opaque Hoses..
Ypically, Pvc Hose Works Best As A Dust Collection Hose For Woodworking Applications Where Dust And Chips From Cutting, Milling Or Sanding Wood Is A Problem. This Heavy-Duty Hose Will Stand Up To Small And Large Chunks Of Wood Without Getting Punctured As Well As Handle The Smallest Of Saw Dust Without Leaking. Pvc Hose Can Be Used As A Primary Line Or Can Be Plugged Into And Out Of Machinery As Needed..
Features
- When setting up our dust collection or filtration systems we tend to have a lot of moving parts during this process and trying to figure out what type of line, piping or hose to use can be challenging. Dust collection hoses need to be not only long enough, but it must be durable, flexible and sturdy enough, so it won t completely collapse in use. It must also perform under the constant use and abuse of an everyday workshop environment. This PVC hose checks all of those boxes and more!
- ypically, PVC hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed.
- PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1.
- This PVC hose is clear which allows you to see what s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.
- While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose temperature range is -20 F to 165 F which is ideal for indoor use like in a woodworking or workshop environment. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.
- See more on Amazon...
Brand: Peachtree Woodworking | Manufacturer: ECTY
Dimensions: 5.00 x 16.00 x 16.00 Inches
See On Amazon #19
Safety Woodworking Push Stick 2 Pack, Each Has a Contoured Handle Embedded with Two Rare Earth Magnets, Ideal for Pushing Stock Through on Table Saws, Router Tables, Shapers and Jointers
Asin: B07QHZQ7FR | Model: 11552 | PartNumber: 11552 | Ean: 0817918022167 | UPC: 817918022167
One Of The “Handiest” Features Of This Push Stick Is That We Have Embedded Two Magnets Into The Handle. We Have Done This Because Many Of Us Have A Hard Time Keeping Track Of Our Tools Once We Are Done With Them. The Embedded Magnets Remedy This Issue By Allowing You To Place The Push Stick Directly On Metal Surfaces Like The Side Of A Table Saw Cabinet. We Have Embedded Not Just One, But Two Separate Magnets On To The Handle To Keep The Push Stick From Sliding Or Inadvertently Rotating..
The Magnetic Handle Push Stick Measures Approximately 12” Long And Has An Ergonomically Designed Handle That Delivers More Precise Control And A Comfortable Grip. The Push Stick Also Has A Hole Drilled Into The Handle Just In Case You Don’T Have Any Metal Surfaces To Place The Push Stick. The Hole Allows You To Hang The Push Stick Just A Like The Rest Of Your Tools . Includes 2 Safety Push Sticks..
The Push Stick End Has Been Intentionally Colored A Bright “Safety Orange” For The Simple Reason Of Being Able To See The Stick At All Times When In Use. This Ensures That You Can See Exactly Where You Are Placing The Push Stick In Relation To The Blade Or Cutter. The Bright Color Also Makes The Push Stick Easy To Locate When It Stored Away..
Designed To Keep Your Hands Away From Blades Or Cutter, This Push Stick Is An Essential Tool For Your Safety. The Push Stick Prevents Your Hand From Getting To Close To The Cutters Or Blades On Table Saws, Router Tables, Shapers And Jointers. The Push Stick Has A 90 Degree Notch On The End With A Relief Circle To Accept The 90 Degree Corner Of Your Stock. The Notched End Is Designed To Be At The Ideal Angle To The Handle And Allows For Even Pressure While Pushing Stock Through The Blade..
Features
- When you need to cut a narrow piece of stock on a table saw we know that it can be a little dicey or intimidating. Many of us try to cut the piece we need on the outside of the blade rather than dealing with narrow cuts. However, cutting narrow stock is sometimes unavoidable. In this case it is recommended that you use a safety device such as a push stick to help feed the stock through. Push sticks also help you safely push a workpiece, keeping it flat against a table top while it is being cut.
- Designed to keep your hands away from blades or cutter, this push stick is an essential tool for your safety. The push stick prevents your hand from getting to close to the cutters or blades on table saws, router tables, shapers and jointers. The push stick has a 90 degree notch on the end with a relief circle to accept the 90 degree corner of your stock. The notched end is designed to be at the ideal angle to the handle and allows for even pressure while pushing stock through the blade.
- One of the handiest features of this push stick is that we have embedded two magnets into the handle. We have done this because many of us have a hard time keeping track of our tools once we are done with them. The embedded magnets remedy this issue by allowing you to place the push stick directly on metal surfaces like the side of a table saw cabinet. We have embedded not just one, but two separate magnets on to the handle to keep the push stick from sliding or inadvertently rotating.
- The push stick end has been intentionally colored a bright safety orange for the simple reason of being able to see the stick at all times when in use. This ensures that you can see exactly where you are placing the push stick in relation to the blade or cutter. The bright color also makes the push stick easy to locate when it stored away.
- The Magnetic Handle Push Stick measures approximately 12 long and has an ergonomically designed handle that delivers more precise control and a comfortable grip. The push stick also has a hole drilled into the handle just in case you don t have any metal surfaces to place the push stick. The hole allows you to hang the push stick just a like the rest of your tools . Includes 2 Safety Push Sticks.
- See more on Amazon...
Brand: Fulton | Manufacturer: Peachtree Woodworking Supply Inc
See On Amazon #20
Peachtree Woodworking Supply ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)
Asin: B07ZKS7Y3W | Ean: 0817918022433 | UPC: 817918022433
Each Clamp Rail Is Manufactured With A Low Profile To Make Guiding Your Power Tool Along The Edge Much Easier. The Low Profile Has Also Been Designed With Guide Accessories In Mind. The Clamp Rails Accept Many Different Accessories (Sold Separately) Or Can Create Your Very Own Jigs And Fixtures To Use With The Progrip Straight Edge Guides. Each Progrip Straight Edge Guide Has The Exact Same Profile Regardless Of Length..
The Lock Lever On Each Clamp Can Be Secured Into One Of Three Positions, Each Position Provides Varying Amounts Of Pressure. Depending On Your Project Or Application, You May Need To Apply More Pressure By Securing The Lock Lever To The Appropriate Position. Once Secured, The Progrip Straight Edge Guide Clamp Is Designed To Have Zero Side To Side Play With Minimal Deflection To Provide You With The Ideal Straight Edge To Make Clean, Smooth Cuts Every Time!.
How Does It Work? Each Progrip Straight Edge Guide Clamp Has One Adjustable Jaw And One Fixed Jaw. The Fixed Jaw Typically Will Go Against The Edge Of The Board Closest To You. Once You Place The Clamp On Your Board With The Fixed Jaw Over The End, The Adjustable End Gets Drawn In Against The Opposite Side Of The Board. Once Set And Aligned, You Secure The Clamp By Simply Locking It Down With The 3 Position Lock Lever..
Cut Straight, True Lines With Circular Saws, Routers, Trim Routers, Jig Saws And Many Other Power Tools You Probably Own. These Clamps Are Ideal For Cutting Large Sheets Of Plywood In Half (With A 50” Straight Edge Guide). Each Clamp Is Identified By The Maximum Clamping Distance Between Jaws. Another Great Application For These Clamps Is Cutting Dado Slots For Bookshelves. The Alignment And Cutting Process For Dados Is So Much Easier Than Ever Before With The Progrip Straight Edge Guides..
Features
- No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
- Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50 straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
- Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
- How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
- The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!
- See more on Amazon...
Brand: Peachtree Woodworking Supply | Manufacturer: Peachtree Woodworking Supply Inc.
See On Amazon
Looking For Something Else?
Search