4-Inch Snap-In Drain Cover
Asin: B0044UWCQC | Model: 828-874 | PartNumber: 828-874
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Brand: MP | Manufacturer: Plumb Shop Div Brasscraft
Dimensions: 8.66 x 10.63 x 9.84 inches | Weight: 1.25 pounds
See On Amazon Similar To 4Inch SnapIn Drain Cover
#1
NDS 420C Pop-Up Drainage Emitter, for 3-Inch & 4-Inch Drain Fittings, Works with Drainage Systems Including Catch Basins, Green Plastic
Asin: B00HCA3SRS | Model: 420C | PartNumber: 420C | Ean: 0052063030005, 7131405275380 | UPC: 052063030005
Outside Flange Prevents Grass From Growing Over The Cover.
Comes With One Pop-Up Drainage Emitter . Hassle-Free Limited Lifetime Warranty Guarantees The Nds Product Is Free From Defects—Or We’Ll Replace It.
Cap, Or Cover, Pops Up As High As 1 In. Once Water Pressure Builds; Closes As Flow Diminishes. Flat Profile Design Reduces Trip Hazard Posed By Open Drain; Closed Position Keeps Emitter Flush To The Ground And Safe From Lawn Mower Blades.
Connects To 3 In. & 4 In. Sewer And Drain Fittings; Connects To Other Pipe Types Using Appropriate Adapters. Releases Collected Water Up To 40 Gpm. Supports Pedestrian Traffic Including Lawn Tractors, When Properly Installed.
Features
- Works with a complete drainage system to release collected stormwater runoff and standing water to a discharge point before it causes costly property damage. Provides collected water a point of release at water-safe areas downstream and away from structures, erosion-prone landscapes, and poor drainage areas
- Connects to 3 in. & 4 in. sewer and drain fittings; connects to other pipe types using appropriate adapters. Releases collected water up to 40 GPM. Supports pedestrian traffic including lawn tractors, when properly installed
- Outside flange prevents grass from growing over the cover
- Cap, or cover, pops up as high as 1 in. once water pressure builds; closes as flow diminishes. Flat profile design reduces trip hazard posed by open drain; closed position keeps emitter flush to the ground and safe from lawn mower blades
- Comes with one Pop-Up Drainage Emitter . Hassle-free limited lifetime warranty guarantees the NDS product is free from defects or we ll replace it
- See more on Amazon...
Brand: NDS | Manufacturer: NDS, Inc.
Dimensions: 1.25 x 5.94 x 5.94 Inches | Weight: 0.18 pounds
Warranty: Warranty.
See On Amazon #2
NDS 11, 4 in. Round Grate Cover Connects to 4 Inch Drain Pipes & Fittings, for Small Lawns, Landscaping and Patios, Black Plastic
Asin: B000BO8OAI | Model: 11, 4 in. | PartNumber: 11, 4 in. | Ean: 0052063400112 | UPC: 052063400112
Connectivity: Fits 4 In. Sewer And Drain Pipes And Fittings, 4 In. Single-Wall Corrugated Pipe, And 4 In. Triple-Wall Pipe.
Specifications: 12 Gpm Flow Rate, 3.9 Square In. Open Surface Area; Recommended For Pedestrians, Bicycles, And Wheelchair Traffic When Properly Installed; Ada Compliant And Heel-Proof.
Soil-Tight Fit: Place Drain Cover On Top Of Drain Pipe Or Drain Fitting; 4 In. Round Drain Grates Come In A Variety Of Colors.
Works In A Variety Of Locations: Ideal For Draining Light Water Flows From Small Lawns, Landscaped Areas, Walkways And Patios.
Features
- BLOCK LEAVES & DEBRIS: Protect your drainage system by preventing leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through
- WORKS IN A VARIETY OF LOCATIONS: Ideal for draining light water flows from small lawns, landscaped areas, walkways and patios
- CONNECTIVITY: Fits 4 in. sewer and drain pipes and fittings, 4 in. single-wall corrugated pipe, and 4 in. triple-wall pipe
- SOIL-TIGHT FIT: Place drain cover on top of drain pipe or drain fitting; 4 in. round drain grates come in a variety of colors
- SPECIFICATIONS: 12 GPM flow rate, 3.9 square in. open surface area; recommended for pedestrians, bicycles, and wheelchair traffic when properly installed; ADA compliant and heel-proof
- See more on Amazon...
Brand: NDS | Manufacturer: NDS Raindrip
Dimensions: 11.63 x 12.88 x 12.88 inches | Weight: 0.14 pounds
Warranty: 1 Year Warranty
See On Amazon #3
NDS 41P8 PVC S&D Cleanout Plug, with 4-Inch MPT Connection, Works with 4-Inch FPT drain fittings attached to Sewer and Drain Pipe, White
Asin: B00L00WHP0 | Model: 41P8 | PartNumber: 41P8 | Ean: 0052063444185 | UPC: 052063444185
Plug Fits Onto Drainage Fittings With 4 In. Female Pipe Thread (Fpt) Connection Point.
Comes With One Cleanout Plug. Meets Applicable Astm Standards.
Attach Mpt End To Fpt Threaded Connection Point On Drainage Fittings.
Removable Plug Provides A Point Of Access Into Pipe System To Feed A Plumbing Snake Into A Clogged Drain Pipe.
Features
- 4 in. MPT connection screws onto 4 in. FPT drainage fittings
- Removable plug provides a point of access into pipe system to feed a plumbing snake into a clogged drain pipe
- Plug fits onto drainage fittings with 4 in. Female Pipe Thread (FPT) connection point
- Attach MPT end to FPT threaded connection point on drainage fittings
- Comes with one Cleanout Plug. Meets applicable ASTM standards
- See more on Amazon...
Brand: NDS | Manufacturer: NDS
Dimensions: 4.38 x 4.38 x 1.75 inches
Warranty: Warranty.
See On Amazon #4
NDS 4" Atrium Grate, Black
Asin: B000UFNX90 | Model: 78 | PartNumber: 78 | Ean: 0052063400785 | UPC: 052063400785
Quick, Easy Install: Place On Top Of A Drain Pipe Or Drain Pipe Fitting For A Soil-Tight Fit; Our Atrium Grates Are Available In A Variety Of Colors And Materials To Blend Seamlessly With Your Landscape.
Specs: Grate Is 4-7/16 In. High; Top Is 2-3/4 In. Diameter; Grate Openings Are ¼ In. Wide.
Built To Last: Made Of Polyvinyl Chloride, The Atrium Drain Grate Will Withstand Weather And Temperatures, Resistant To Cracking And Fading.
Ideal For Moderate Flows: This Drain Grate Will Drain Moderate Flows From Mulched Landscape Beds, Natural Areas And Window Wells.
Features
- PROTECT DRAINAGE SYSTEM: Block debris from entering and potentially clogging the pipeline by using a grate on top of a drain pipe, while still letting excess surface water flow through
- IDEAL FOR MODERATE FLOWS: This drain grate will drain moderate flows from mulched landscape beds, natural areas and window wells
- QUICK, EASY INSTALL: Place on top of a drain pipe or drain pipe fitting for a soil-tight fit; our atrium grates are available in a variety of colors and materials to blend seamlessly with your landscape
- BUILT TO LAST: Made of polyvinyl chloride, the atrium drain grate will withstand weather and temperatures, resistant to cracking and fading
- SPECS: Grate is 4-7/16 in. high; top is 2-3/4 in. diameter; grate openings are in. wide
- See more on Amazon...
Brand: NDS | Manufacturer: NDS Raindrip
Dimensions: 4.19 x 4.19 x 4.44 inches | Weight: 0.03 pounds
Warranty: 1 year limited manufacturer.
See On Amazon #5
Artiwell 4-1/4 OD Snap-in Shower Drain Cover, Round Shower Drain Strainer Grid, Replacement Cover, Designed for Long-Lasting(Chrome Plated)
Asin: B0BJ6WQQ3X | Model: 812907CP | PartNumber: 812907CP
Widely Used Snap-In Shower Drain Grid: This Shower Drain Cover Can Fits Cast Iron And Plastic Shower Drain , As Well As The Clay Tile Pipes..
Keep Your Drain Clear: This Useful Accessory Helps Keep Unwanted Debris And Foreign Objects Out Of Your Drain Pipes. It Will Stop Most Hairs Before Them Get Into Your Pipes, Collect Them Around It And Maximize Hair Snaring. This Will Help Keep Your Drain Clear..
Easy To Use & Install: The Prongs Of This Snap-In Shower Drain Grate Can Be Adjusted Fit Whatever Drain, You Can Easy To Install With Just A Snap, No Tools Diy Installation, Do Not Use Plumber's Putty For Installation..
Standard Design: This Drain Cover Is 4-1/4 In. Outside Diameter, 2-7/8 In. Prong-To-Prong. Thick Enough To Avoid Deformation..
Features
- DESIGNED TO LAST: Artiwell Snap-In SHOWER DRAIN Grate is made of high quality 100% Stainless Steel. It is double coated and will not fade over time. Designed for Long-Lasting.
- STANDARD DESIGN: This Drain Cover is 4-1/4 in. outside diameter, 2-7/8 in. prong-to-prong. Thick enough to Avoid Deformation.
- WIDELY USED SNAP-IN SHOWER DRAIN GRID: This shower drain cover can fits Cast Iron and Plastic Shower Drain , as well as the Clay Tile Pipes.
- EASY TO USE & INSTALL: The prongs of this Snap-In SHOWER DRAIN Grate can be adjusted fit whatever drain, you can easy to install with just a snap, No Tools DIY Installation, Do not use plumber's putty for installation.
- KEEP YOUR DRAIN CLEAR: This useful accessory helps keep unwanted debris and foreign objects out of your drain pipes. It will stop most hairs before them get into your pipes, collect them around it and maximize hair snaring. This will help keep your drain clear.
- See more on Amazon...
Brand: Artiwell | Manufacturer: Artiwell
Dimensions: 0.04 x 4.25 x 4.25 inches
See On Amazon #6
Drain Defender Easy-Install Two-Stage Stairwell Drain Cover Resists Yard Waste Clogs and Flooded Basements
Asin: B07Z3XS5TX | Ean: 0860002651002 | UPC: 860002651002
Slotted Barrier Wall Stops Larger Debris. Inner Perforated Screen Traps Smaller Debris.
Rugged, Durable Pvc Construction. Lower Guide Pin Keeps It In Place. Parts Separate Easily For Cleaning With A Garden Hose.
Product Dimensions: 12" Diameter X 2" High, But Effective On Smaller Drains..
Features
- PATENTED two-piece filter. Pull it straight from the box and place it over your existing drain. Protects round drains up to 8.5" diameter, square drains 6" per side.
- Product dimensions: 12 Diameter x 2 High, but effective on smaller drains.
- Slotted barrier wall stops larger debris. Inner perforated screen traps smaller debris
- Rugged, durable PVC construction. Lower guide pin keeps it in place. Parts separate easily for cleaning with a garden hose
- See more on Amazon...
Brand: Drain Defender | Manufacturer: Drain Defender LLC
Dimensions: 2.00 x 12.00 x 12.00 inches | Weight: 1.00 pounds
Warranty: Limited 180 day manufacturer warranty.
See On Amazon #7
NDS 9P11, 4-Inch Round Grate, Fits 4-Inch Sewer & Drain Fittings, PVC, White
Asin: B00HXHAOM2 | Model: 911 | PartNumber: 911 | Ean: 0052063409115 | UPC: 052063409115
Connectivity: Fits 4 In. Sewer And Drain Pipes And 4 In. Sewer And Drain Fittings.
Specifications: 12 Gpm Flow Rate, 3.9 Sq. In. Open Surface Area; Meets Applicable Astm Standards.
Soil-Tight Fit: Place Drain Cover On Top Of Drain Pipe Or Drain Fitting; 4 In. Round Drain Grates Come In A Variety Of Colors.
Works In A Variety Of Locations: Ideal For Draining Light Water Flows From Small Lawns, Landscaped Areas, Walkways And Patios.
Features
- BLOCKS LEAVES AND DEBRIS: Protect your drainage system by preventing leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through
- WORKS IN A VARIETY OF LOCATIONS: Ideal for draining light water flows from small lawns, landscaped areas, walkways and patios
- CONNECTIVITY: Fits 4 in. sewer and drain pipes and 4 in. sewer and drain fittings
- SOIL-TIGHT FIT: Place drain cover on top of drain pipe or drain fitting; 4 in. round drain grates come in a variety of colors
- SPECIFICATIONS: 12 GPM flow rate, 3.9 sq. in. open surface area; meets applicable ASTM standards
- See more on Amazon...
Brand: NDS | Manufacturer: NDS, Inc.
Dimensions: 1.75 x 4.25 x 4.25 inches | Weight: 0.24 Pounds
See On Amazon #8
Amerimax Home Products 86670 Snap-in Filter Gutter Guard, 3', White (Pack of 25), 75 Foot
Asin: B00KZZS67E | Model: 86670 | PartNumber: 86670 | Ean: 0017857461250 | UPC: 017857461250
Constructed From High Quality, Rigid Pvc For Durability.
One Carton Contains 25 Pieces Which Will Cover 75 Ft. Of Gutter.
Made In The Usa.
Snap-In Style For Easy Installation And Convenience.
The Mesh Design Helps To Catch Fine Debris; Must Install With The Filter Facing The Sky.
Features
- Compatible with 4", 5", and 6" metal (steel or aluminum) K-style gutters
- The mesh design helps to catch fine debris; MUST install with the filter facing the sky
- Constructed from high quality, rigid PVC for durability
- Snap-in style for easy installation and convenience
- One carton contains 25 pieces which will cover 75 ft. of gutter
- Made in the USA
- See more on Amazon...
Brand: Amerimax | Manufacturer: Cleveland Tubing, Inc.
Dimensions: 4.00 x 37.00 x 8.00 inches | Weight: 8.80 pounds
See On Amazon #9
NDS 40, Grate Cover, Connects to Round 6 in. Speed-D Catch Basin 6 Inch Drain Pipes & Fittings, for Small Lawns, Landscaping, and Patios, Black Plastic
Asin: B000BO9KJ2 | Model: 40 | PartNumber: 40 | Ean: 0052063600406 | UPC: 052063600406
Connectivity: Fits 6 Inch Sewer And Drain Pipe And Fittings, 6 Inch Single-Wall Corrugated Pipe, And Nds 6 In. Spee-D Catch Basin Drains.
Specifications: 28 Gpm Flow Rate, 9.1 Square In. Open Surface Area- Recommended For Pedestrians, Bicycles, And Wheelchair Traffic; Grate Is 2-3/8 In. High; Top Is 6-3/4 In. In Diameter; Grate Openings Are 1/4 In. Wide.
Soil-Tight Fit: Place Drain Cover On Top Of Drain Pipe Or Drain Fitting; 6 In. Round Drain Grates Come In A Variety Of Colors.
Works In A Variety Of Locations: Ideal For Draining Light Water Flows From Small Lawns, Landscaped Areas, Walkways And Patios.
Features
- BLOCK LEAVES & DEBRIS FROM ENTERING YOUR DRAINAGE SYSTEM: Prevent debris from potentially clogging the pipeline while letting excess surface water flow through
- WORKS IN A VARIETY OF LOCATIONS: Ideal for draining light water flows from small lawns, landscaped areas, walkways and patios
- CONNECTIVITY: Fits 6 inch sewer and drain pipe and fittings, 6 inch single-wall corrugated pipe, and NDS 6 in. Spee-D catch basin drains
- SOIL-TIGHT FIT: Place drain cover on top of drain pipe or drain fitting; 6 in. round drain grates come in a variety of colors
- SPECIFICATIONS: 28 GPM flow rate, 9.1 square in. open surface area- recommended for pedestrians, bicycles, and wheelchair traffic; Grate is 2-3/8 in. high; top is 6-3/4 in. in diameter; grate openings are 1/4 in. wide
- See more on Amazon...
Brand: NDS | Manufacturer: NDS, Inc.
Dimensions: 6.75 x 6.75 x 2.38 inches | Weight: 0.45 pounds
Warranty: Warranty.
See On Amazon #10
4 1/4 Snap-in Shower Drain Grate - Matte Black - Replacement Cover - VHI - Handyman Designed & Tested in America - Will Never Bend or Break
Asin: B0961DFC9S | Model: LX-3240 | PartNumber: LX-3240 | Ean: 7427115842814
⚒ Tested For Quality: The Vance Home Improvement Snap-In Drain Grate Was Designed By A Handyman And Quality Tested Before It Gets To You. Quality Metal With A Double Coated Matte Black Finish Will Look Smooth And Elegant..
⚒ The Safe Choice: We Stand By Every One Of Our Original, Quality, Long-Lasting Products..
⚒ Easy To Use & Install: No Additional Tools Needed. Diy Installation Steps Listed Below. Please Check That You Need A 4-1/4 Inch (4.25 Inch) Snap-In Drain Cover..
⚒ Fit & Sizing: Length Across Is 4-1/4” Long. Prong To Prong Length Is 2-⅞” Long. We Designed Our Drain Grate To Be Exactly 1.2Mm Thick, Meaning It Will Fit Snugly And Will Not Bend If Stepped On..
Features
- DESIGNED TO LAST: Our Snap-In Grate is high quality 100% Stainless Steel. Other grates use cheaper metal that chip over time/bend under pressure. Our smooth, matte black finish is double coated and will not fade over time.
- FIT & SIZING: Length across is 4-1/4 long. Prong to prong length is 2- long. We designed our drain grate to be exactly 1.2mm thick, meaning it will fit snugly and WILL NOT bend if stepped on.
- TESTED FOR QUALITY: The Vance Home Improvement Snap-In Drain Grate was designed by a handyman and quality tested before it gets to you. Quality Metal with a double coated matte black finish will look smooth and elegant.
- EASY TO USE & INSTALL: No additional tools needed. DIY installation steps listed below. PLEASE CHECK that you need a 4-1/4 inch (4.25 inch) Snap-in Drain Cover.
- THE SAFE CHOICE: We stand by every one of our original, quality, long-lasting products.
- See more on Amazon...
Brand: LXLOTUS | Manufacturer: Vance Home Improvement
Dimensions: 0.28 x 4.25 x 4.25 inches
See On Amazon #11
Oatey 42358 4-inch Stainless Steel Strainer with 2 Screws
Asin: B000H5SMYO | Model: 42358 | PartNumber: 42358 | Ean: 0038753423586 | UPC: 038753423586
4" Dia..
3-3/8" Screw Mount Dia..
Fits (Sku # 45756, 45757, 4017331, 4017851, 45764, 45765).
Features
- Stainless steel
- Fits (SKU # 45756, 45757, 4017331, 4017851, 45764, 45765)
- 4 Dia.
- 3-3/8 Screw mount Dia.
- See more on Amazon...
Brand: Oatey | Manufacturer: Oatey
Dimensions: 3.00 x 5.00 x 5.00 inches | Weight: 0.10 pounds
Warranty: Warranty.
See On Amazon #12
Black Snap-in Shower Drain Cover,Hidrop 4-1/4" OD Round Shower Strainer Grid, Easy-to-Install Replacement Cover Stainless Steel Matte Black
Asin: B0BKFY2712 | Model: HP-D-1007MB | PartNumber: HP-D-1007MB
- Easy To Use & Install: Just Align The Pins Of The Matte Black Shower Drain And Insert It Directly Into The Drain Hole. Its User-Friendly Design Makes Installation A Breeze For Everyone..
- Long-Lasting: Not Only Does This Shower Drain Cover Do Its Job, But It's Also Stylish And Sustainable. Its Sleek Design Ensures It Will Look Great In Any Bathroom, And Its Sturdy Construction Ensures It Will Last For Years To Come..
- Keep Unblocked: You Can Now Grab Large Items Without Clogging The Sewer. This Black Snap-In Shower Drain Cover Effectively Blocks Debris From Going Down The Drain, Keeping It Unblocked..
- Ideal Size: With A Diameter Of 4-1/4 Inches And A Pin Distance Of 2-7/8 Inches, This Black Round Shower Drain Cover Is The Ideal Size For Most Standard Shower Drains. It Fits Snuggly In Place And Covers The Drain Opening Fully..
Features
- - Sturdy Materials: Made of solid heavy metal stainless steel construction, this Hidrop shower drain cover is built to last and handle everyday use without showing signs of wear and tear.
- - Ideal Size: With a diameter of 4-1/4 inches and a pin distance of 2-7/8 inches, this black round shower drain cover is the ideal size for most standard shower drains. It fits snuggly in place and covers the drain opening fully.
- - Easy to Use & Install: Just align the pins of the matte black shower drain and insert it directly into the drain hole. Its user-friendly design makes installation a breeze for everyone.
- - Keep Unblocked: You can now grab large items without clogging the sewer. This black snap-in shower drain cover effectively blocks debris from going down the drain, keeping it unblocked.
- - Long-Lasting: Not only does this shower drain cover do its job, but it's also stylish and sustainable. Its sleek design ensures it will look great in any bathroom, and its sturdy construction ensures it will last for years to come.
- See more on Amazon...
Brand: HIDROP | Manufacturer: HIDROP
Dimensions: 4.25 x 4.25 x 4.25 inches
See On Amazon #13
NDS 8, 4.5-Inch Square Grate, Connects to 4-Inch Drain Pipes and Fittings, for Small Lawns, Landscaping and Patios, Plastic, Black
Asin: B000ZMZMCY | Model: 8 | PartNumber: 8 | Ean: 0052063500089 | UPC: 052063500089
Connectivity: Fits 4 In. Sewer And Drain Pipes And Fittings, 4 In. Single-Wall Corrugated Pipes, 4 In. Triple-Wall Pipes.
Specifications: 32 Gpm Flow Rate, 10.4 Sq. In. Open Surface Area; Recommended For Pedestrians, Bicycles, And Wheelchair Traffic When Properly Installed; Ada Compliant And Heel-Proof; Grate Is 2 In. High.
Soil-Tight Fit: Place Drain Cover On Top Of Drain Pipe Or Drain Fitting; 5 In. Square Drain Grates Come In A Variety Of Colors.
Works In A Variety Of Locations: Ideal For Draining Light Water Flows From Small Lawns, Landscaped Areas, Patios, And Walkways.
Features
- BLOCKS LEAVES AND DEBRIS: Protect your drainage system by preventing leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through
- WORKS IN A VARIETY OF LOCATIONS: Ideal for draining light water flows from small lawns, landscaped areas, patios, and walkways
- CONNECTIVITY: Fits 4 in. sewer and drain pipes and fittings, 4 in. single-wall corrugated pipes, 4 in. triple-wall pipes
- SOIL-TIGHT FIT: Place drain cover on top of drain pipe or drain fitting; 5 in. square drain grates come in a variety of colors
- SPECIFICATIONS: 32 GPM flow rate, 10.4 sq. in. open surface area; recommended for pedestrians, bicycles, and wheelchair traffic when properly installed; ADA compliant and heel-proof; Grate is 2 in. high
- See more on Amazon...
Brand: NDS | Manufacturer: NDS Raindrip
Dimensions: 1.81 x 4.56 x 4.56 inches | Weight: 0.20 pounds
See On Amazon #14
Holge Round 4 Inch Screw-in Floor Drain Cover Replacement Shower Drainer Grate with Screws (Matte Black)
Asin: B0BZY9LH2P | Model: ROUND | PartNumber: ROUND
Fit: Installs On 3-3/8-Inch Centers Using 10-24Unc Screws Screw Holes Center To Center Measures 3-3/8" (85.7Mm), 0.4-Inch Big Drainage Hole For High Flow Rate.
This Is Screw-In Type Shower Drainer Cover, Not Snap-In Type,And, Pls Measure Before Purchase (Outer Diameter And Screw Hole To Hole).
This Floor Drain Cover Is Made Of 14 Gauge Premium Grade (1.8Mm) 304 Stainless Steel, Thick Enough, Avoid Deformation.
O.D. 4" (101.6Mm) Round Shower Stall Drainer For Replacement.
Features
- Shower Drainer Cover Screw Holes Center to Center Measures 3-3/8" (85.7mm), 0.4-inch Big Drainage Hole for High Flow Rate
- O.D. 4 (101.6mm) Round Shower Stall Drainer for Replacement
- FIT: Installs on 3-3/8-inch centers using 10-24UNC screws Screw Holes Center to Center Measures 3-3/8 (85.7mm), 0.4-inch Big Drainage Hole for High Flow Rate
- This Floor Drain Cover is Made of 14 Gauge Premium Grade (1.8mm) 304 Stainless Steel, Thick enough, Avoid Deformation
- This is Screw-in Type shower drainer cover, NOT SNAP-IN TYPE,And, Pls Measure before Purchase (Outer Diameter and Screw Hole to Hole)
- See more on Amazon...
Brand: holge | Manufacturer: HOLGE
See On Amazon #15
Canplas 193064 Flush Cleanout Plug, 4-Inch
Asin: B00PCSKSRU | Model: 193064 | PartNumber: 193064 | Ean: 0662671193056 | UPC: 662671193056
Normally Used In The Drainage Portion Of The Dwv System Only.
Model Number: 193064.
Service Temperature Rated At (140F) 60C.
Features
- Self sealing plug , no gasket required
- Service temperature rated at (140F) 60C
- Normally used in the drainage portion of the DWV system only
- Model number: 193064
- See more on Amazon...
Brand: Canplas | Manufacturer: Canplas
Dimensions: 4.45 x 1.20 x 4.45 Inches | Weight: 0.22 pounds
See On Amazon #16
NDS 910B, 4 In. Round Grate Drain Cover, with PVC Collar, Connects to 3 Inch Drain Pipe & 4 Inch Drain Fittings, for Small Lawns, Landscaping and Patios, Satin Brass
Asin: B000ICYHEK | Model: 910B | PartNumber: 910B | Ean: 0052063491004 | UPC: 052063491004
Connectivity: Fits 3 Inch Sewer And Drain Pipe; 4 Inch Sewer & Drain Fittings.
Specifications: 16 Gpm Flow Rate, 5.3 Square In. Open Surface Area; Ada Compliant And Heel-Proof; Grate Is 1-3/4 In. High; 4-1/4 In. Wide In Diameter; Grate Openings Are ¼ In. Wide.
Soil-Tight Fit: Place Drain Cover On Top Of Drain Pipe Or Drain Fitting; 4 In. Round Drain Grates With Collars Come In A Variety Of Metal Finishes.
Works In A Variety Of Locations: Strong And Stylish, The 4 In. Round Drain Grate In Satin Brass Resists Rust And Corrosion With A Lustrous Look. Ideal For Draining Light Water Flows From Small Lawns, Landscaped Areas, Walkways And Patios.
Features
- BLOCK LEAVES & DEBRIS: Protect your drainage system by preventing leaves and debris from entering and potentially clogging the pipeline while letting excess surface water flow through
- WORKS IN A VARIETY OF LOCATIONS: Strong and stylish, the 4 in. Round Drain Grate in satin brass resists rust and corrosion with a lustrous look. Ideal for draining light water flows from small lawns, landscaped areas, walkways and patios
- CONNECTIVITY: Fits 3 inch sewer and drain pipe; 4 inch sewer & drain fittings
- SOIL-TIGHT FIT: Place drain cover on top of drain pipe or drain fitting; 4 in. round drain grates with collars come in a variety of metal finishes
- SPECIFICATIONS: 16 GPM flow rate, 5.3 square in. open surface area; ADA compliant and heel-proof; Grate is 1-3/4 in. high; 4-1/4 in. wide in diameter; grate openings are in. wide
- See more on Amazon...
Brand: NDS | Manufacturer: NDS Raindrip
Dimensions: 4.25 x 2.00 x 1.75 inches | Weight: 0.64 pounds
See On Amazon #17
Oatey 4-1/4 in. Carded White Plastic Snap-Tite Strainer
Asin: B000VYKG3Q | Model: 42003 | PartNumber: 42003 | Ean: 0038753420035 | UPC: 038753420035
Can Be Used With Any 4-1/4 In. Round Drain Top.
Versatile White Finish.
Made Of Durable White Pvc Plastic.
Designed For Use With A 2 In. Or 3 In. Drain Opening.
Features
- Universal snap-tite shower strainer in a designer finish
- Designed for use with a 2 in. or 3 in. drain opening
- Can be used with any 4-1/4 in. round drain top
- Made of durable white PVC plastic
- Versatile white finish
- See more on Amazon...
Brand: Oatey | Manufacturer: oatey
Dimensions: 0.50 x 6.25 x 4.50 Inches
See On Amazon #18
4" Matte Black Shower Drain Cover - Square Floor Drain Cover Replacement - Hair Catcher/Drain Strainer for Bathrooms, Showers, and Sinks - SUS304 Stainless Steel & CUPC Certified
Asin: B0CZQR8FC7 | Model: SDG008 | PartNumber: SDG008 | Ean: 0717211727366 | UPC: 717211727366
【Keep Your Drain Clear】Shower Floor Drain Cover Can Keep Unwanted Objects Out Of Drain Pipes And Have Hair Catch Function, Keeping Your Bathroom Cool And Clear All Day..
【Easy To Install】Simply Screw The 4-Inch Shower Drain Cover Onto Your Shower Drain, No Special Installation Required. Perfect For Bathroom Change A New One Shower Drain Cover..
【Areas Of Application】Shower Drain Grate Can Be Used In Many Different Situations Such As Bathrooms, Kitchens, Garages, Toilets, Basements, And More..
【Standard Design】The Square Shower Drain Cover Is Measured 4 L X 4 W (Inches). Screw Holes Center To Center Measures 3-3/8" (86Mm), Big Drainage Hole For High Flow Rate. Attention: Please Measure Your Drain Before Purchase. This Floor Dariner Cover Is Screw-In Type , Not Snap-In Type..
Features
- Design to Last Shower drain cover is made of high-quality 100% stainless steel, thick enough to avoid deformation, non-fading and long-lasting use.
- Standard Design The square shower drain cover is measured 4 L x 4 W (inches). Screw Holes Center to Center Measures 3-3/8 (86mm), big drainage hole for high flow rate. Attention: Please measure your drain before purchase. This floor dariner cover is Screw-in Type , NOT SNAP-IN TYPE.
- Keep Your Drain Clear Shower floor drain cover can keep unwanted objects out of drain pipes and have hair catch function, keeping your bathroom cool and clear all day.
- Areas of Application Shower drain grate can be used in many different situations such as bathrooms, kitchens, garages, toilets, basements, and more.
- Easy to Install Simply screw the 4-inch shower drain cover onto your shower drain, no special installation required. Perfect for bathroom change a new one shower drain cover.
- See more on Amazon...
Brand: Yaseingoo | Manufacturer: Yaseingoo
See On Amazon #19
EZ-FLO Stainless Steel Floor Drain Snap-in Cover for 4 Inch Pipe, 5 Inch Outside Diameter, Satin Finish, 43472
Asin: B00838J26E | Model: 0 | PartNumber: 0 | Ean: 0091712434726 | UPC: 091712434726
Durable: This Bath Drain Strainer Is Made With A High-Impact Stainless Steel Body Which Provides Durability And Protects Against Rust And Corrosion.
Design: This Stainless Steel Drain Strainer Features A Satin Finish That Gives It A Modern, Sleek Look.
Easy To Install: This Bathtub Drain Strainer Easily Snaps Into Place For Quick And Easy Installation.
Compatibility: This Shower Drain Strainer Is Designed To Fit Pipes Of 4 Inches And Has An Outside Diameter Of 5 Inches.
Features
- EZ-FLO FLOOR DRAIN COVER: Bath drain strainers are designed to prevent hair and any other small debris from entering the pipes
- COMPATIBILITY: This shower drain strainer is designed to fit pipes of 4 inches and has an outside diameter of 5 inches
- DURABLE: This bath drain strainer is made with a high-impact stainless steel body which provides durability and protects against rust and corrosion
- EASY TO INSTALL: This bathtub drain strainer easily snaps into place for quick and easy installation
- DESIGN: This stainless steel drain strainer features a satin finish that gives it a modern, sleek look
- See more on Amazon...
Brand: EZ-FLO | Manufacturer: EZ-Flo
Dimensions: 1.50 x 5.00 x 5.00 inches | Weight: 0.25 pounds
See On Amazon #20
Danco Easy-to-Install, Snap-in-Style Shower Drain, Polished Stainless Steel, 3-1/4-Inch, 1-Set (89201)
Asin: B00FI6UIH6 | Model: 89201 | PartNumber: 89201 | Ean: 0037155892013 | UPC: 037155892013
To Help Ease Your Installation, The Prongs Can Be Adjusted To Fit A 3 In. Pipe.
This Product Is Constructed Of A Very Luxurious Polished Stainless Steel..
This Is Very Easy To Install, Making It A Quick And Easy Process..
Has A Snap-In Installation Technique For Simplicity. This Has A 3-1/4 In. Diameter.
Features
- Designed to fit cast iron, plastic and clay tile pipes
- Has a snap-in installation technique for simplicity. This has a 3-1/4 in. diameter
- To help ease your installation, the prongs can be adjusted to fit a 3 in. pipe
- This is very easy to install, making it a quick and easy process.
- This product is constructed of a very luxurious polished stainless steel.
- See more on Amazon...
Brand: Danco | Manufacturer: Danco, Inc.
Dimensions: 0.05 x 3.25 x 3.25 inches | Weight: 0.09 pounds
Warranty: Limited 1 year.
See On Amazon
Looking For Something Else?
Search