NT Cutter Blades for Mat Board Cutter, 2-Blade/Pack, 1 Pack (BMC-45P)
Asin: B005J0WQXU | Model: BMC-45P | PartNumber: BMC-45P | Ean: 4904011014642
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Made Of High Quality Carbon Tool Steel With Chromium And Tungsten Added.
Made In Japan.
Good To Make Decorative Frames For Pictures And Photos, To Make Architectural Models, And To Frame Artwork, Etc..
2Ea/Pack.
Cutting Material: Mat Board.
24Mm W X 24Mm L X 0.30Mm T.
Features
- Blades for mat board cutter (MAT-45P)
- 24mm W x 24mm L x 0.30mm T
- Made of high quality carbon tool steel with chromium and tungsten added
- Cutting material: Mat board
- Good to make decorative frames for pictures and photos, to make architectural models, and to frame artwork, etc.
- 2ea/pack
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.01 x 0.94 x 0.94 inches | Weight: 0.01 Pounds
See On Amazon Similar To NT Cutter Blades for Mat
#1
NT Cutter PRO Auto-Lock Stainless Steel Utility Knife (A-1P) 9mm
Asin: B005J0XDSW | Model: A-1P | PartNumber: A-1P | Ean: 8271072784941, 0030203900937, 4904011010156 | UPC: 030203900937
Features An Automatic Blade Lock.
Made In Japan.
Replacement Blade: Ba-50Ss Stainless Steel Blade (Ba-160, Ba-50P, Ba-51P, Ba-53P And Ba-40000-On Are Also Applicable).
Cutting Material: Window Film, Paper, Wallpaper, Card Stock, Vinyl, Etc..
With Built-In Blade Snapper And Pocket Clip / Designed For Right And Left Handed Use.
Blade Size: 9Mm.
Features
- Standard duty rust resistant stainless steel snap off blade knife with stainless steel blade
- Blade Size: 9mm
- Features an automatic blade lock
- With built-in blade snapper and pocket clip / Designed for right and left handed use
- Replacement blade: BA-50SS Stainless Steel Blade (BA-160, BA-50P, BA-51P, BA-53P and BA-40000-ON are also applicable)
- Cutting Material: Window film, paper, wallpaper, card stock, vinyl, etc.
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.40 x 5.40 x 0.40 inches | Weight: 0.04 pounds
See On Amazon #2
NT Cutter PRO Auto-Lock Stainless Steel Graphic Knife (AD-2P), Standard
Asin: B003DXWN42 | Model: AD-2P | PartNumber: AD-2P | Ean: 7336117860613, 8861349019038, 4904011010255, 8271072778636, 7487993746024, 7131405073320
30 Degree Blade.
Cutting Material: Film, Vinyl, Foam Board, Coroplast, Leather, Plastic Edge, Etc.
Made In Japan.
With Built-In Blade Snapper And Pocket Clip / Designed For Right And Left Handed Use.
Replacement Blade: Bad-21P (Ba-160, Ba-50P, Ba-50Ss, Ba-51P, Ba-53P And Ba-40000-On Are Also Applicable).
Features An Automatic Blade Lock.
Blade Size: 9Mm.
Features
- Standard duty rust resistant stainless steel snap off blade knife
- Blade Size: 9mm
- 30 degree blade
- Features an automatic blade lock
- With built-in blade snapper and pocket clip / Designed for right and left handed use
- Replacement blade: BAD-21P (BA-160, BA-50P, BA-50SS, BA-51P, BA-53P and BA-40000-ON are also applicable)
- Cutting Material: Film, vinyl, foam board, coroplast, leather, plastic edge, etc
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.40 x 5.40 x 0.40 inches | Weight: 0.04 Pounds
See On Amazon #3
NT Cutter ABS Grip Multi-Blade Cartridge Knife (A-551P)
Asin: B009F6BZXG | Model: A-551P | PartNumber: A-551P | Ean: 0030203900166, 7174117255516 | UPC: 030203900166
Heavy-Duty Abs Grip.
Cutting Material: Paper, Wallpaper, Card Stock, Vinyl, Film, Shrink-Wrap, Etc..
Made In Japan.
# Of Blade Included: 2.
Replacement Blade: Ba-160, Ba-50P (Ba-50Ss, Bad-21P, Ba-51P, Ba-53P And Ba-40000-On Are Also Applicable).
With Built-In Blade Snapper.
Multi-Blade Cartridge / Accommodates Up To 5 Blades.
Features
- Standard duty snap off blade utility knife (Blade size: 9mm)
- Multi-blade cartridge / Accommodates up to 5 blades
- Heavy-duty ABS grip
- With built-in blade snapper
- # of blade included: 2
- Replacement blade: BA-160, BA-50P (BA-50SS, BAD-21P, BA-51P, BA-53P and BA-40000-ON are also applicable)
- Cutting Material: Paper, wallpaper, card stock, vinyl, film, shrink-wrap, etc.
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: Lionel
Dimensions: 0.60 x 5.50 x 0.70 inches | Weight: 0.05 Pounds
See On Amazon #4
NT Cutter Blades for Heavy-Duty Circle Cutters and Mat Board Cutters, 10-Blade per Pack (BC-400P)
Asin: B001V7E1DI | Model: BC-400P | PartNumber: BC-400P | Ean: 4904011017070
Made Of High Quality Carbon Tool Steel.
Cutting Material: Foamboard, Matboard, Soft Film, Leather, Thin Rubber Sheet, Card Stock, Any Other Thin Material.10Ea Per Pack.Made In Japan.
Packed In Hanging Plastic Case.
9Mm W X 20Mm L X 1Mm T.
Features
- Blades for heavy duty circle cutters (C-2500P, C-3000GP, CL-100P) and mat board cutter (OL-7000GP)
- 9mm W x 20mm L x 1mm T
- Made of high quality carbon tool steel
- Packed in hanging plastic case
- Cutting Material: Foamboard, matboard, soft film, leather, thin rubber sheet, card stock, any other thin material.10ea per pack.Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.04 x 0.79 x 0.35 inches | Weight: 0.02 Pounds
See On Amazon #5
NT Cutter Replacement Blades For Safety Carton Opener R-1200P, 10-Blade/Pack (BR-400P)
Asin: B000TGCZ1M | Model: BR-400P | PartNumber: BR-400P | Ean: 4904011017063
Made Of High Quality Carbon Tool Steel.
10Ea Per Pack.
Made In Japan.
Cutting Material: Plastic Strapping, Packages, Cartons, Shrink-Wrap,Etc..
Good For Cutting Plastic Strapping, Removing Staples, Warehouses, Factories, Etc..
Hanging Plastic Case.
12.5Mm W X 37Mm L X 0.60Mm T.
Features
- Blades for safety carton opener (R-1200P)
- 12.5mm W x 37mm L x 0.60mm T
- Made of high quality carbon tool steel
- Hanging plastic case
- Cutting material: Plastic strapping, packages, cartons, shrink-wrap,etc.
- Good for cutting plastic strapping, removing staples, warehouses, factories, etc.
- 10ea per pack
- Made in Japan
- See more on Amazon...
First Available: 09/07/2019
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.02 x 1.46 x 0.49 inches | Weight: 0.04 Pounds
See On Amazon #6
NT Cutter Aluminum Die-Cast Holder Cushioned Grip Art Knife, 1 Knife (D-500GP)
Asin: B005J0XVDE | Model: D-500GP | PartNumber: D-500GP | Ean: 4904011010736
Protection Cap Included.
Cutting Material: Paper, Card Stock, Any Other Thin Material.
Made In Japan.
Replacement Blade: Bda-200P, Bdc-200P.
Weight Of Knife: 0.8 Oz..
# Of Blade Include: Bda-200P X 5, Bdc-200P X 5.
9Mm Diameter Anti-Slip, Cushioned Elastomer Grip / Made Of Recycled Material.
Features
- Aluminum die-cast holder art knife
- 9mm diameter anti-slip, cushioned elastomer grip / Made of recycled material
- Protection cap included
- # of blade include: BDA-200P x 5, BDC-200P x 5
- Replacement blade: BDA-200P, BDC-200P
- Weight of Knife: 0.8 oz.
- Cutting Material: Paper, card stock, any other thin material
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.50 x 5.60 x 0.50 inches | Weight: 0.05 Pounds
See On Amazon #7
NT Cutter ABS Grip 30-Degree Multi-Blade Cartridge Knife (A-553P),Yellow
Asin: B074VLXB32 | Model: A-553P | PartNumber: A-553P | Ean: 0030203901286 | UPC: 030203901286
Auto-Lock System Is Purposely Not Equipped To Prevent From Cutting Too Deep And Accidentally Scratching The Glass Or Body Of The Car..
Good For Professional Window Tinting, Car Wrapping, Sign Making Professionals, Other Industry Professionals, Etc./ Made In Japan (Taa Designated).
# Of Blade Included: 2/ Replacement Blade: Bad-21P (30-Degree Blade), (Ba-160, Ba-50P, Ba-50Ss, Ba-51P, Ba-53P And Ba-40000-On Are Also Applicable).
Cutting Material: Paper, Wallpaper, Card Stock, Vinyl, Film, Shrink-Wrap, Etc..
Abs Grip With Smooth Rounded Edge To Protect Cutting Surfaces From Scratching..
Accommodates Up To 5 Blades Multi-Blade Cartridge/ Heavy-Duty Abs Grip/ With Built-In Blade Snapper.
Features
- Standard duty 30-degree snap off blade utility knife/ blade size: 9mm
- Accommodates up to 5 blades multi-blade cartridge/ heavy-duty ABS grip/ with built-in blade Snapper
- Auto-lock system is purposely NOT equipped to prevent from cutting too deep and accidentally scratching the glass or body of the car.
- ABS grip with smooth rounded edge to protect cutting surfaces from scratching.
- # of blade included: 2/ Replacement blade: bad-21p (30-degree blade), (ba-160, ba-50p, ba-50ss, ba-51p, ba-53p and ba-40000-on are also applicable)
- Cutting material: paper, wallpaper, card stock, vinyl, film, shrink-wrap, etc.
- Good for Professional window tinting, car wrapping, sign making professionals, other industry professionals, etc./ made in Japan (TAA designated)
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.70 x 5.50 x 0.60 inches | Weight: 0.05 pounds
See On Amazon #8
NT Professional Mat Cutter, 45 Degree Bevel Mat Board Cutter, 1 Cutter (MAT-45P), Aluminum Die-Cast Grip, Red/Grey
Asin: B005J0XLO8 | Model: MAT-45P | PartNumber: MAT-45P | Ean: 0780411868535, 7174117317986, 4904011011412, 0793187534115 | UPC: 793187534115, 780411868535
Included Non-Slip Rubber Base-Sheet To Stabilize Ruler Placement..
Note: Kindly Refer The Video (User Guide) For Assistance.
Tips For A Clean Cut: Do Not Stick The Blade Out Too Far. Position The Blade Point About 0.3Mm Out Of The Matboard..
Tips For A Clean Cut: Use A Thick, Wide Ruler To Guide Your Cut Along The Lines. Included With This Cutter Are Non-Slip Seals Which You Can Cut-To-Size And Attached To The Underside Of Your Ruler For Extra Stability..
Tips For A Clean Cut: Do Not Force The Cut With One Stroke. You Will Get A Cleaner Cut If You Carefully Score The Mat And Cut Over It A Few Times Until It Cuts Through..
Tips For A Clean Cut: Slightly Over Cut The 4 Corners Of The Mat For A Nice Sharp Cutout..
Replacement Blade: Bmc-45P.
Cutting Material: Mat Board, Foam Board.
Mat Board Cutter, 45 Degree Bevel Straight Cut. Aluminum Die-Cast Slide Grip.
Features
- If you are a first-time user, you may need some practice to use this product.
- Mat Board Cutter, 45 degree bevel straight cut. Aluminum Die-Cast Slide Grip
- Included non-slip rubber base-sheet to stabilize ruler placement.
- Replacement Blade: BMC-45P
- Tips for a clean cut: Do not force the cut with one stroke. You will get a cleaner cut if you carefully score the mat and cut over it a few times until it cuts through.
- Tips for a clean cut: Slightly over cut the 4 corners of the mat for a nice sharp cutout.
- Tips for a clean cut: Do not stick the blade out too far. Position the blade point about 0.3mm out of the matboard.
- Tips for a clean cut: Use a thick, wide ruler to guide your cut along the lines. Included with this cutter are non-slip seals which you can cut-to-size and attached to the underside of your ruler for extra stability.
- Cutting material: Mat board, Foam board
- Note: Kindly refer the video (User Guide) for assistance
- See more on Amazon...
First Available: 08/01/2019
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 6.18 x 8.27 x 3.31 inches | Weight: 0.49 Pounds
See On Amazon #9
LION Ev-R-Round Perfect Circle Cutter , 3/4" to 6-3/4" Diameter (C-1500)
Asin: B00JDTTIWU | Model: C-1500P | PartNumber: C-1500P | Ean: 0030203900180 | UPC: 030203900180
Measurements Are Metric (Mm/Cm).
Replacement Blade: Bda-200P.
# Of Blade Included: 6 (1 Already Set To The Body + 5 Extra In Built-In Compartment ).
Dia. (3/4" - 6-3/4"). This Can Cut 0.5Mm (0.02") Thick Materials (Doesn’T Cut Hard Material Well). The Blade Should Only Stick Out No More Than 0.1 To 0.2 Mm Longer Than The Material You Are Cutting..
Features
- Circle cutter. If you are a first-time user, you may need some practice to use this product.
- Dia. (3/4 - 6-3/4). This can cut 0.5mm (0.02) thick materials (doesn t cut hard material well). The blade should only stick out no more than 0.1 to 0.2 mm longer than the material you are cutting.
- Measurements are Metric (mm/cm)
- # of blade included: 6 (1 already set to the body + 5 extra in built-in compartment )
- Replacement blade: BDA-200P
- See more on Amazon...
Brand: NT Cutter | Manufacturer: Lionel
Dimensions: 2.10 x 3.90 x 4.30 Inches | Weight: 0.16 pounds
See On Amazon #10
NT Cutter Heavy-Duty Circle Cutter, 1-3/16 Inches 6-5/16 Inches Diameter, 1 Cutter (C-2500P)
Asin: B001V7JZE8 | Model: C-2500P | PartNumber: C-2500P | Ean: 4904011011153
Country Of Origin:- China.
Model Number: C-2500P.
Nt Cutter.
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 2.10 x 5.10 x 5.10 inches | Weight: 0.37 Pounds
See On Amazon #11
NT Cutter Aluminum Die-Cast Body Heavy-Duty Circle Cutter, 1-3/16 Inches 10-1/4 Inches Diameter, 1 Cutter (C-3000GP)
Asin: B004INPJPQ | Model: C-3000GP | PartNumber: C-3000GP | Ean: 4904011011177
Replacement Blade: 2 X Bc-400P Single Edge Blade Included. Double Edged Blade Bc-1P Is Available To Purchase Separately.*.
This Can Cut 1.5 - 2.0 Mm (0.06 - 0.08") Thick Materials. The Blade Should Only Stick Out No More Than 0.1 To 0.2 Mm Longer Than The Material You Are Cutting.
Cutting Material: Thin Veneer/Ceiling Tile/Leather/Rubber/Acetates/Cardboard/Thin Floor Mat Etc.
Diameter 3 - 26Cm (1.18 - 10.23 Inch).
Features
- Heavy duty circle cutter
- Diameter 3 - 26cm (1.18 - 10.23 inch)
- Replacement blade: 2 x BC-400P single edge blade included. Double edged blade BC-1P is available to purchase separately.*
- Cutting material: thin veneer/ceiling tile/leather/rubber/acetates/cardboard/thin floor mat etc
- This can cut 1.5 - 2.0 mm (0.06 - 0.08) thick materials. The blade should only stick out no more than 0.1 to 0.2 mm longer than the material you are cutting
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 2.40 x 6.30 x 4.70 inches | Weight: 0.72 Pounds
See On Amazon #12
NT-00101 - (Case of 2 units) NT BA-50SS Stainless Steel Snap Blades (50 blades per unit) FOR Caba Store
Asin: B09RJRR16H | Model: BA-50SS | PartNumber: BA-50SS | Ean: 0788115832647 | UPC: 788115832647
Brand: NT CUTTER | Manufacturer: FLORIDAS CABA LLC
Dimensions: 1.00 x 5.00 x 2.50 Inches
See On Amazon #13
NT Cutter Aluminum Die-Cast Grip Multi-Blade Cartridge Knife (A-1000RP)
Asin: B009F6BXME | Model: A-1000RP | PartNumber: A-1000RP | Ean: 0030203900104 | UPC: 030203900104
Blade Size: 9Mm.
# Of Blade Included: 2.
Replacement Blade: Ba-160, Ba-50P (Ba-50Ss, Ba-51P, Ba-53P And Ba-40000-On Are Also Applicable).
Aluminum Die-Cast Grip / Electrical-Acrylic Metal Coated / Made Of Recycled Materials.
Stainless Steel Blade-Sliding-Track / With Triangle Blade Snapper.
Features An Automatic Blade Lock.
Multi-Blade Cartridge / Accommodates Up To 5 Blades.
Features
- Standard duty snap off blade utility knife
- Multi-blade cartridge / Accommodates up to 5 blades
- Blade Size: 9mm
- Features an automatic blade lock
- Aluminum die-cast grip / Electrical-acrylic metal coated / Made of recycled materials
- Stainless steel blade-sliding-track / With triangle blade snapper
- # of blade included: 2
- Replacement blade: BA-160, BA-50P (BA-50SS, BA-51P, BA-53P and BA-40000-ON are also applicable)
- See more on Amazon...
First Available: 09/12/2012
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.50 x 5.40 x 1.00 inches | Weight: 0.10 pounds
See On Amazon #14
NT Cutter 9mm Snap-Off Blades, 50-Blade/Pack, 1 Pack (BA-50P)
Asin: B001U73LXU | Model: BA-50P | PartNumber: BA-50P | Ean: 5112788216452, 4904011016066, 7487993783951, 7241870918542, 7535001112016
58 Degree.
50Ea Per Pack.
Made In Japan.
Packed In Hanging Plastic Container.
Cutting Material: Paper, Wallpaper, Card Stock, Vinyl, Film, Shrink-Wrap, Etc..
Made Of High Quality Carbon Tool Steel.
9Mm W X 80Mm L X 0.38Mm T.
Features
- Standard duty snap-off blades
- 9mm W x 80mm L x 0.38mm T
- 58 degree
- Made of high quality carbon tool steel
- Packed in hanging plastic container
- Cutting Material: Paper, wallpaper, card stock, vinyl, film, shrink-wrap, etc.
- 50ea per pack
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.02 x 3.15 x 0.35 inches | Weight: 0.21 Pounds
See On Amazon #15
NT Cutter 30-Degree Blades for Art Knife and Circle Cutter, 40-Blade/Pack, 1 Pack (BDC-200P)
Asin: B003CF8X5Y | Model: BDC-200P | PartNumber: BDC-200P | Ean: 4904011016639
30 Degree Blades.
40Ea Per Pack.
Made In Japan.
Packed In Hanging Plastic Container.
Cutting Material: Vynil Any Other Thin Material.
Made Of High Quality Carbon Tool Steel.
4Mm W X 18Mm L X 0.38Mm T.
Features
- Blades for Art knives and circle cutters
- 4mm W x 18mm L x 0.38mm T
- 30 degree blades
- Made of high quality carbon tool steel
- Packed in hanging plastic container
- Cutting Material: Vynil any other thin material
- 40ea per pack
- Made in Japan
- See more on Amazon...
First Available: 09/07/2019
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.02 x 0.71 x 0.16 Inches | Weight: 0.02 pounds
See On Amazon #16
NT Cutter Heavy Duty Aluminum Die-Cast Grip Multi-Blade Cartridge Knife, 1 Knife (L-2000RP), Red.
Asin: B002NUIJN0 | Model: L-2000RP | PartNumber: L-2000RP | Ean: 4904011010392
Blade Size: 18Mm.
# Of Blade Included: 2.
Replacement Blade: Bl-150P, Bl-10P Or Bl-50P (Bl-3000-On Is Also Applicable).
Aluminum Die-Cast Grip / Electrical-Acrylic Metal Coated / Made Of Recycled Materials.
Stainless Steel Blade-Sliding-Track / With Triangle Blade Snapper.
Features An Automatic Blade Lock / With Screw-Stopper.
Multi-Blade Cartridge / Accommodates Up To 6 Blades.
Features
- Heavy duty snap off blade utility knife
- Multi-blade cartridge / Accommodates up to 6 blades
- Blade Size: 18mm
- Features an automatic blade lock / With screw-Stopper
- Aluminum die-cast grip / Electrical-acrylic metal coated / Made of recycled materials
- Stainless steel blade-sliding-track / With triangle blade snapper
- # of blade included: 2
- Replacement blade: BL-150P, BL-10P or BL-50P (BL-3000-ON is also applicable)
- See more on Amazon...
First Available: 10/01/2012
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.80 x 6.20 x 1.60 inches | Weight: 0.29 pounds
See On Amazon #17
NT Cutter 18mm Heavy-Duty Ex tra-Sharp Black Snap-Off Blades, 50-Blade/Pack, 1 Pack (BL-51P), 58 degree
Asin: B007TFC2BO | Model: BL-51P | PartNumber: BL-51P | Ean: 4904011016417
Black.
50Ea Per Pack.
Made In Japan.
Made Of High Quality Carbon Tool Steel.
Cutting Material: Cardboard, Rubber, Leather, Corkboard, Acetates, Linoleum, Carpet, Thin Veneer,Form Board, Etc..
58 Degree.
18Mm W X 100Mm L X 0.50Mm T.
Features
- Heavy duty snap-off blades
- 18mm W x 100mm L x 0.50mm T
- Black
- 58 degree
- Made of high quality carbon tool steel
- Cutting material: Cardboard, rubber, leather, corkboard, acetates, linoleum, carpet, thin veneer,form board, etc.
- 50ea per pack
- Made in Japan
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.20 x 3.94 x 0.71 inches | Weight: 0.72 Pounds
See On Amazon #18
NT Cutter Premium Evolution PMG series Aluminum Die-Cast Grip Auto-Lock Utility Knife, With 30-Degree Extra Sharp Black Blade (PMGA-EVO2)
Asin: B07FM4TWC7 | Model: PMGA-EVO2 | PartNumber: PMGA-EVO2 | Ean: 4904011012358
Electrical-Acrylic Metal Coated Aluminum Die-Cast Grip With Built-In Blade Snapper / Designed For Right And Left Handed Use.
Replacement Blade: Ba15p Carbon Steel Blade / Made In Japan (Taa Designated).
Cutting Material: Paper, Wallpaper, Card Stock, Vinyl, Film, Shrink-Wrap, Etc. / Good For Craft & Hobby Projects, Professional Artists Or Installers, General Use.
Features An Automatic Blade Lock And Stainless Steel Blade-Sliding-Track.
Features
- Standard duty snap off blade utility knife with 9mm, Black extra sharp 30 degree blade
- Features an automatic blade lock and stainless steel blade-sliding-track
- Electrical-acrylic metal coated Aluminum die-cast grip with built-in blade snapper / Designed for right and left handed use
- Cutting Material: Paper, wallpaper, card stock, vinyl, film, shrink-wrap, etc. / Good for craft & hobby projects, professional artists or installers, general use
- Replacement blade: BA15P carbon steel blade / Made in Japan (TAA designated)
- See more on Amazon...
First Available: 05/29/2019
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.40 x 5.80 x 0.75 inches
See On Amazon #19
NT CUTTER Double Edged Blade Utility Knife Blade (BC-1P)
Asin: B01D4ARFUA | Model: BC-1P | PartNumber: BC-1P | Ean: 4904011019524
Made Of High Quality Carbon Tool Steel.
1Ea Per Pack. Made In Japan..
Cutting Material: Thin Veneer, Ceiling Tile, Leather, Rubber, Acetates, Cardboard, Thin Floor Mat, Etc..
9Mm W X 19Mm L X 1Mm T.
Features
- Blades for heavy duty Circle cutter (c-2500p, c-3000gp) and large Circle cutter (cl-100p)
- 9mm W x 19mm L x 1mm t
- Made of High quality carbon tool steel
- Cutting material: thin veneer, ceiling Tile, leather, rubber, acetates, cardboard, thin floor mat, etc.
- 1ea per pack. Made in Japan.
- See more on Amazon...
Brand: NT Cutter | Manufacturer: NT Incorporated
Dimensions: 0.04 x 0.35 x 0.75 inches | Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search