OTC 6574 Universal Heavy Duty Hub Puller
Asin: B005MVB3MG | Model: 6574 | PartNumber: 6574 | Ean: 0731413560361 | UPC: 731413560361
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Forged Puller Assembly With 1 Inch Drive Screw.
Additional Legs Can Be Added To Center Hub For Special Applications.
Recommended For Use With Impact Gun And/Or Striking With A Hammer.
Wide Range Of 4 Inch To 8 Inch + Bolt Circle.
Features
- Adjustable sliding legs can be positioned anywhere on center hub
- Wide range of 4 inch to 8 inch + bolt circle
- Forged puller assembly with 1 inch drive screw
- Recommended for use with impact gun and/or striking with a hammer
- Additional legs can be added to center hub for special applications
- See more on Amazon...
First Available: 01/30/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 12.00 x 12.00 inches | Weight: 13.00 pounds
Warranty: Lifetime Limited Warranty
See On Amazon Similar To OTC 6574 Universal Heavy Duty
#1
OTC 7100 4,000 lb. Capacity Lifting Bracket Set for use with Load Levelers and Lifting Slings
Asin: B000P72CJK | Model: 7100 | PartNumber: 7100 | Ean: 6935743345740, 0731413004933, 0031113166949, 7753716602107 | UPC: 031113166949, 731413004933
4,000 Pound Capacity.
Set Of 2 Brackets.
Made In Usa.
Brackets Accept Up To 1/2 Inch Diameter Bolts.
Angled Brackets Bolt Directly To Component Being Lifted - Perfect For Engines, Transmissions, And More.
Features
- OTC's high strength steel lifting bracket set is designed for use with load levelers and lifting slings
- Angled brackets bolt directly to component being lifted - perfect for engines, transmissions, and more
- 4,000 pound capacity
- Brackets accept up to 1/2 inch diameter bolts
- Set of 2 brackets
- Made in USA
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 6.20 x 11.60 x 1.90 inches | Weight: 0.00 pounds
Warranty: Limited lifetime warranty
See On Amazon #2
OTC 6497 Pitman Arm Puller, Max. Spread 3 1/4 in
Asin: B0014DDIJC | Model: 6497 | PartNumber: 6497 | Ean: 0731413418624 | UPC: 731413418624
Manufacturer: Otc.
Country Of Manufacture: United States.
Brand: OTC | Manufacturer: OTC
Dimensions: 8.50 x 13.40 x 10.60 inches | Weight: 4.40 pounds
Warranty: 1 year manufacturer
See On Amazon #3
OTC 7249 Ball Joint, U-Joint, and Brake Anchor Pin Service Kit with Storage Case , Gray
Asin: B0002SRGXY | Model: 7249 | PartNumber: 7249 | Ean: 0731413000935, 0013588023316 | UPC: 013588023316, 731413000935
Contains 3 Receiver Tubes - 2-3/4 Inch Id X 3 Inch Od, 2-1/4 Inch Id X 2-1/2 Inch Od, And 1-3/4 Inch Id X 2 Inch Od.
Sturdy Blow Molded Hard Case Keeps Contents Protected And Secure When Not In Use.
Includes 1 Each; Installing Cup, Receiving Cup, And Installing Adapter.
Clamp Frame Features Heavy Duty Materials And Construction To Prevent Distortion In Severe Use Cases.
Features
- OTC's Ball Joint, U-Joint, and Brake Anchor Pin Service Kit removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins.Fit Type: Universal
- Clamp frame features heavy duty materials and construction to prevent distortion in severe use cases
- Contains 3 receiver tubes - 2-3/4 inch ID x 3 inch OD, 2-1/4 inch ID x 2-1/2 inch OD, and 1-3/4 inch ID x 2 inch OD
- Includes 1 each; installing cup, receiving cup, and installing adapter
- Sturdy blow molded hard case keeps contents protected and secure when not in use
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 5.70 x 16.20 x 16.00 Inches | Weight: 0.02 pounds
Warranty: LIFETIME
See On Amazon #4
OTC (522) Large Gear and Pulley Puller
Asin: B000OQKJB0 | Model: 522 | PartNumber: 522 | Ean: 0080850302141, 0013438028683, 0731413005220, 0031113145821 | UPC: 031113145821, 013438028683, 080850302141, 731413005220
Forcing Screw Is 3/4 Inch-16 X 11-5/8 Inches Long.
Similar To Ford D80l-522-A And 303-D025.
Accommodates Any Cap Screw Up To 1/2 Inch Diameter.
Spread From 2 Inches To 7-3/4 Inches; Block Is 8-1/4 Inches Wide.
Features
- With OTC's 522 Large Gear and Pulley Puller you can easily remove a wide range of gears, pulleys or other parts that have tapped holes
- Spread from 2 inches to 7-3/4 inches; block is 8-1/4 inches wide
- Forcing screw is 3/4 inch-16 x 11-5/8 inches long
- Accommodates any cap screw up to 1/2 inch diameter
- Similar to Ford D80L-522-A and 303-D025
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 13.20 x 3.10 x 2.20 inches | Weight: 4.10 pounds
Warranty: LIFETIME
See On Amazon #5
OTC Puller Set, Bar, 5 Ton, 13 Pieces
Asin: B0002SR47M | Model: 4518 | PartNumber: 4518 | Ean: 0080850302127, 0731413039478, 0069060357172 | UPC: 080850302127, 069060357172, 731413039478
5 Inch Bar-Type Puller Head With Forcing Screw.
Blow-Molded Plastic Storage Case Keeps Set Contents Organized And Protected From Loss.
The 5 Inch Puller Cross-Bar With A 6-1/4 Inch Forcing Screw And Each Of The Bearing Separators May Be Used Separately Or In Combination With Other Pullers Or Tools.
Includes The Two Most Popular Bearing Splitters - 2 Inch And 3 Inch - Plus Four Sets Of Hex Push Puller Legs.
Features
- Separator tools are used with bar puller and legs for a wide variety of pulling jobs
- Includes the two most popular bearing splitters - 2 inch and 3 inch - plus four sets of hex push puller legs
- 5 inch bar-type puller head with forcing screw
- The 5 inch puller cross-bar with a 6-1/4 inch forcing screw and each of the bearing separators may be used separately or in combination with other pullers or tools
- Blow-molded plastic storage case keeps set contents organized and protected from loss
- See more on Amazon...
Brand: OTC | Manufacturer: Otc
Dimensions: 16.00 x 10.10 x 2.90 inches | Weight: 0.01 Pounds
Warranty: 1 Year
See On Amazon #6
OTC 7471A Engine Barring Socket for Cummins Applications
Asin: B00063YWUK | Model: 7471A | PartNumber: 7471A | Ean: 0731413028588, 7294104673472, 7262318293144 | UPC: 731413028588
Tool Features A Load-Bearing Collar That Provides Friction-Free Operation While Rotating The Tool In The Housing.
To Use: Simply Insert Tool Into The Flywheel Housing Until It Engages The Ring Gear, Then Attach A 1/2 Inch Square Drive Ratchet Or Breaker Bar And Turn.
Durable Steel Tool Engages Engine And Allows It To Be Rotated For Injector Work, Valve Lash Adjustments, And More.
For Use On Cummins B And C Series Diesel Engines And 5.9L Liter Diesels Used In Dodge Pickups.
Features
- OTC Engine Barring Splined Male Socket for manual engine rotation
- For use on Cummins B and C series diesel engines and 5.9L liter diesels used in Dodge pickups
- Tool features a load-bearing collar that provides friction-free operation while rotating the tool in the housing
- Durable steel tool engages engine and allows it to be rotated for injector work, valve lash adjustments, and more
- To use: simply insert tool into the flywheel housing until it engages the ring gear, then attach a 1/2 inch square drive ratchet or breaker bar and turn
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.70 x 4.80 x 4.50 Inches | Weight: 0.00 pounds
See On Amazon #7
OTC 7480 Heavy-Duty Truck Clutch Alignment Tool - 10-Spline, 1-3/4" OD, 1" Pilot
Asin: B0029XLPVE | Model: 7480 | PartNumber: 7480 | Ean: 0731413004674, 0777780883900 | UPC: 731413004674, 777780883900
Rugged Construction Will Easily Support The Weight Of Heavy Clutch Discs.
1-3/4 Inch O.D. Shaft, 1 Inch Pilot, 10 Splines; Similar To Ford 308-D010 (D93t-7550-A).
To Use, Loosely Install Clutch Disc And Pressure Plate On Flywheel Then Insert Alignment Tool Through The Clutch Into The Bearing, Center Disc, Then Tighten Pressure Plate To Spec.
Tool Is Constructed Of Lightweight Fiberglass-Reinforced Nylon That Won't Hang Up In Clutch Disc Splines.
Features
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines; similar to Ford 308-D010 (D93T-7550-A)
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.20 x 18.70 x 3.00 inches | Weight: 0.55 Pounds
Warranty: Limited lifetime warranty
See On Amazon #8
OTC (7394) Universal Hub Puller
Asin: B0002SRH60 | Model: 7394 | PartNumber: 7394 | Ean: 7436829019740, 0731413010705 | UPC: 731413010705
Maximum Bolt Circle Of 7-1/2 Inches.
Includes Striking Wrench And Puller Screw.
Won't Distort Wheel Lugs.
This Puller Makes Wheel-Hub Removal Quick, Easy, And Damage Free.
Features
- Adjustable sliding arms
- This puller makes wheel-hub removal quick, easy, and damage free
- Maximum bolt circle of 7-1/2 inches
- Won't distort wheel lugs
- Includes striking wrench and puller screw
- See more on Amazon...
First Available: 11/14/2007
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 2.00 x 11.75 x 7.50 inches | Weight: 6.70 pounds
Warranty: Limited lifetime warranty
See On Amazon #9
OTC 4534 Multi Purpose Bearing and Pulley Puller Set
Asin: B00061SM9E | Model: 4534 | PartNumber: 4534 | Ean: 0731413040276 | UPC: 731413040276
Set Components Deliver A Spread Of 3 Inches To 5 Inches And A Reach Of 1 Inch To 2-1/4 Inches.
Durable Blow-Molded Plastic Storage Case That Keeps Set Components Contained And Organized So They Are Ready For Use When Needed.
Kit Includes 2 Ea. Forcing Screws (Live Center), 2 Ea. Cross-Bar Yokes, 2 Ea. Clamp Bolts, 3 Pairs Of Puller Jaws, 1 Pair Of Jaw Pins With Ball Spring, And 3 Pairs Of Capped Bolts.
Drop-Forged Components Can Be Used In A Variety Of Combinations.
Features
- For a wide range of pulling jobs including: bearings; alternator, generator, power steering, and crankshaft pulleys; timing gears; harmonic balancers; and more
- Drop-forged components can be used in a variety of combinations
- Set components deliver a spread of 3 inches to 5 inches and a reach of 1 inch to 2-1/4 inches
- Kit includes 2 ea. forcing screws (live center), 2 ea. cross-bar yokes, 2 ea. clamp bolts, 3 pairs of puller jaws, 1 pair of jaw pins with ball spring, and 3 pairs of capped bolts
- Durable blow-molded plastic storage case that keeps set components contained and organized so they are ready for use when needed
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 10.80 x 13.60 x 3.00 inches | Weight: 9.20 Pounds
See On Amazon #10
OTC 464 2-Ton 'GripLock' External and Internal Puller
Asin: B004CGUAHG | Model: 464 | PartNumber: 464 | Ean: 0731413545689, 0031113148525 | UPC: 731413545689, 031113148525
Configurable As A 2 Or 3 Jaw Puller To Suit Your Needs.
Live Center' Action Forcing Screw.
Both External And Internal Pulling Action.
Pressure Bearing Yoke Cap Holds Jaws In Place For Ease Of Set Up - In Any Orientation.
Features
- OTC's 2-Ton 'GripLock' Puller features a 4 inch maximum reach and a 3-4 inch spread
- Pressure bearing yoke cap holds jaws in place for ease of set up - in any orientation
- Configurable as a 2 or 3 jaw puller to suit your needs
- Both external and internal pulling action
- Live Center' action forcing screw
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 3.75 x 9.25 x 4.00 inches | Weight: 3.00 pounds
Warranty: Limited lifetime warranty
See On Amazon #11
OTC 5070 Heavy-Duty Truck Clutch Alignment Tool - 10-Spline, 1-1/2" OD, 30 mm Pilot
Asin: B00063YIQI | Model: 5070 | PartNumber: 5070 | Ean: 0731413026799 | UPC: 731413026799
Rugged Construction Will Easily Support The Weight Of Heavy Clutch Discs.
1-1/2 Inch O.D. Shaft, 30 Mm Pilot, 10 Splines.
To Use, Loosely Install Clutch Disc And Pressure Plate On Flywheel Then Insert Alignment Tool Through The Clutch Into The Bearing, Center Disc, Then Tighten Pressure Plate To Spec.
Tool Is Constructed Of Lightweight Fiberglass-Reinforced Nylon That Won't Hang Up In Clutch Disc Splines.
Features
- OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches
- Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines
- Rugged construction will easily support the weight of heavy clutch discs
- To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec
- 1-1/2 inch O.D. shaft, 30 mm pilot, 10 splines
- See more on Amazon...
First Available: 08/25/2011
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 18.00 x 4.00 Inches | Weight: 0.29 pounds
Warranty: Limited Lifetime Warranty
See On Amazon #12
OTC 6533 Separator Tool
Asin: B000RGLCFE | Model: 6533 | PartNumber: 6533 | Ean: 0731413040979 | UPC: 731413040979
Also A Separating Tool For Tie Rods On Medium And Heavy-Duty Trucks.
11-5/8" Long With A 1-7/16" Fork Spread.
Works As A Pitman Arm Wedge On Light Trucks.
It Will Remove Camber Adjustment Sleeves On Ford Pickups That Have An Adjustable Camber.
Features
- This handy tool is multipurpose
- It will remove camber adjustment sleeves on Ford pickups that have an adjustable camber
- Also a separating tool for tie rods on medium and heavy-duty trucks
- Works as a pitman arm wedge on light trucks
- 11-5/8 long with a 1-7/16 fork spread
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.00 x 14.70 x 4.30 inches | Weight: 2.00 pounds
Warranty: Limited lifetime warranty
See On Amazon #13
OTC 4441 Heavy Duty 3-Leg Filter Wrench for Large Size Filters, Silver
Asin: B00BVL7JZ6 | Model: 4441 | PartNumber: 4441 | Ean: 0731413570223 | UPC: 731413570223
Heavy Duty Knurled Leg Design.
Strong Enough To Remove The Most Stubborn Of Filters.
1/2 Inch Square Drive.
Fits Filter Range Of 4 Inches To 6-1/2 Inches.
Features
- Self gripping design for true universal fit
- Fits filter range of 4 inches to 6-1/2 inches
- Heavy duty knurled leg design
- 1/2 inch square drive
- Strong enough to remove the most stubborn of filters
- See more on Amazon...
First Available: 03/16/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 4.50 x 5.00 x 5.00 Inches | Weight: 3.00 pounds
Warranty: One Year Limited Warranty
See On Amazon #14
OTC 4440 Heavy Duty 3-Leg Filter Wrench for Standard Size Filters, Silver
Asin: B00BVL7K0K | Model: 4440 | PartNumber: 4440 | Ean: 0731413570216 | UPC: 731413570216
Heavy Duty Knurled Leg Design.
Strong Enough To Remove The Most Stubborn Of Filters.
1/2 Inch Square Drive With 21 Millimeters Hex Option.
Fits Filter Range Of 3 Inches To 4-3/4 Inches.
Features
- Self gripping design for true universal fit
- Fits filter range of 3 inches to 4-3/4 inches
- Heavy duty knurled leg design
- 1/2 inch square drive with 21 millimeters hex option
- Strong enough to remove the most stubborn of filters
- See more on Amazon...
First Available: 03/16/2013
Brand: OTC | Manufacturer: OTC
Dimensions: 3.20 x 6.60 x 4.20 inches | Weight: 1.00 pounds
Warranty: One Year Limited Warranty
See On Amazon #15
OTC 4676 Windshield Wiper Puller
Asin: B000L7JQE8 | Model: 4676 | PartNumber: 4676 | Ean: 0777780969734, 7262318383371, 4684505047966, 0787461459331, 0731413045639 | UPC: 731413045639, 777780969734, 787461459331
Simply Place Puller Feet Under Wiper Arm And Tighten Forcing Screw Against Wiper Shaft To Remove The Wiper Arm.
Features A Rugged Metal Frame And Forcing Screw With Rounded Tip To Engage Small Depression On Windshield Washer Shaft Or Loosened Nut - Keeping The Screw Centered On The Shaft For Optimum Performance.
Tool Features A Throat Depth Of 1-1/16 Inches; Foot Spacing Accomodates Wiper Shafts Up To Approximately 5/8 Inch Diameter.
Engineered To Ensure No Damage Will Occur To Wiper Arm Hood Or Cowling During Wiper Arm Removal.
Features
- Safely removes wiper arms on a wide variety of foreign and domestic Cars, SUVs, Vans, and Light Trucks
- Engineered to ensure no damage will occur to wiper arm hood or cowling during wiper arm removal
- Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft to remove the wiper arm
- Tool features a throat depth of 1-1/16 inches; foot spacing accomodates wiper shafts up to approximately 5/8 inch diameter
- Features a rugged metal frame and forcing screw with rounded tip to engage small depression on windshield washer shaft or loosened nut - keeping the screw centered on the shaft for optimum performance
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 1.20 x 3.60 x 6.30 inches | Weight: 0.00 pounds
Warranty: One year limited warranty
See On Amazon #16
OTC 1027 5-Ton Reversible Jaw 'Grip-O-Matic' Puller - Long 2/3 Jaw (Mechanical) Silver
Asin: B0002SRGCU | Model: 1027 | PartNumber: 1027
Ean: 0013438028294, 0080850301342, 0617390879668, 0069060272215, 0731413010279, 0642008199913, 0031113165300
UPC: 080850301342, 617390879668, 069060272215, 013438028294, 031113165300, 731413010279, 642008199913
Maximum Reach - 5-1/2 Inches; Maximum Spread - 7 Inches.
Center Screw Size - 9/16-20 X 6-15/16 Inches Long.
Upper Jaw Thickness - 5/16 Inch, Lower Jaw Thickness - 1/4 Inch; Upper Jaw Width - 3/8 Inch, Lower Jaw Width - 3/4 Inch.
Forged From Quality Steel, Heat Treated, And Subjected To Rigorous Tests Which Exceed The Rated Capacity.
Features
- OTC's 5-ton capacity, long 2/3-jaw, reversible gear and bearing puller is easily configurable as either a 2 or 3 jaw puller enabling you to remove and install a wider variety of parts for fast, effective repairs
- Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
- Maximum reach - 5-1/2 inches; maximum spread - 7 inches
- Upper jaw thickness - 5/16 inch, lower jaw thickness - 1/4 inch; upper jaw width - 3/8 inch, lower jaw width - 3/4 inch
- Center screw size - 9/16-20 x 6-15/16 inches long
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 10.00 x 7.50 x 6.00 inches | Weight: 0.14 pounds
Warranty: Lifetime
See On Amazon #17
OTC Tools 5693 Dual/Single Wheel Separator
Asin: B07CVJXG5G | Model: 5693 | PartNumber: 5693 | Ean: 0731413589447 | UPC: 731413589447
The Pusher End Has Two Grooves, One For 16"-17", And The Other For 19.5"-24.5" Wheels..
Outer Drive Hook Includes A Handle That Allows For Fast And Easy Alignment As Well As A Flat Side, Both To Eliminate Turning During Use..
Pressure Is Applied To The Wheel Rim And Not The Wheel Lip To Eliminate Bending Of The Wheel..
Features
- Includes four adapters: dual wheel outer, dual wheel inner (long cupped), single wheel (short cupped), and flat.
- Pressure is applied to the wheel rim and not the wheel lip to eliminate bending of the wheel.
- The pusher end has two grooves, one for 16-17, and the other for 19.5-24.5 wheels.
- Outer drive hook includes a handle that allows for fast and easy alignment as well as a flat side, both to eliminate turning during use.
- See more on Amazon...
First Available: 05/04/2018
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 5.30 x 16.00 x 15.50 inches
See On Amazon #18
OTC 1025 5-Ton Reversible Jaw 'Grip-O-Matic' Puller - Long 2 Jaw (Mechanical)
Asin: B0002SRFP8 | Model: 1025 | PartNumber: 1025 | Ean: 0731413010255 | UPC: 731413010255
Maximum Reach - 5-1/2 Inches; Maximum Spread - 6 Inches.
Center Screw Size - 9/16-20 X 6-15/16 Inches Long.
Upper Jaw Thickness - 5/16 Inch, Lower Jaw Thickness - 1/4 Inch; Upper Jaw Width - 3/8 Inch, Lower Jaw Width - 3/4 Inch.
Forged From Quality Steel, Heat Treated, And Subjected To Rigorous Tests Which Exceed The Rated Capacity.
Features
- OTC's 5-ton capacity, long 2-jaw, reversible gear and bearing puller enables you to remove and install parts for fast, effective repairs
- Forged from quality steel, heat treated, and subjected to rigorous tests which exceed the rated capacity
- Maximum reach - 5-1/2 inches; maximum spread - 6 inches
- Upper jaw thickness - 5/16 inch, lower jaw thickness - 1/4 inch; upper jaw width - 3/8 inch, lower jaw width - 3/4 inch
- Center screw size - 9/16-20 x 6-15/16 inches long
- See more on Amazon...
First Available: 11/14/2007
Brand: OTC | Manufacturer: OTC Tools
Dimensions: 2.20 x 11.80 x 5.80 inches | Weight: 2.50 Pounds
Warranty: Limited lifetime warranty
See On Amazon #19
OTC 7826 Torsion Bar Tool for Ford Truck
Asin: B000RMGMPS | Model: 7826 | PartNumber: 7826 | Ean: 0731413024252 | UPC: 731413024252
The Tool Fits 1997-2003 Ford F-150 4Wd Pickups 1995-2001 Ford Explorer 4Wd 1998-2001 Mercury Mountaineer And 1998-2001 Ford Ranger.
Without It A Torsion Bar Could Unwind And Possibly Cause Damage.
Features
- This tool firmly holds the torsion bar on Ford light-duty trucks while you adjust or service the front suspension
- Without it a torsion bar could unwind and possibly cause damage
- The tool fits 1997-2003 Ford F-150 4WD pickups 1995-2001 Ford Explorer 4WD 1998-2001 Mercury Mountaineer and 1998-2001 Ford Ranger
- See more on Amazon...
First Available: 08/25/2011
Brand: OTC | Manufacturer: OTC
Dimensions: 1.80 x 9.30 x 6.20 inches | Weight: 0.95 pounds
Warranty: Limited Lifetime Warranty
See On Amazon #20
OTC 5072 Lucas Girling Rear Brake Adjusting Tool - Ford F700, F800, F900
Asin: B000F5LISS | Model: 5072 | PartNumber: 5072 | Ean: 0731413027093 | UPC: 731413027093
Lucas Girling Brakes Are Popular On Ford F700, F800, And F900 Series Trucks.
Lifetime Limited Warranty.
High-Grade Materials Ensure Quality Performance Over The Lifetime Of The Tool.
Tool's Offset Design And Extra Handle Length Gets The Job Done Quickly.
Features
- OTC's Lucas Girling Rear Brake Adjusting Tool enables you to easily adjust rear Lucas Girling hydraulic brake systems
- Tool's offset design and extra handle length gets the job done quickly
- Lucas Girling brakes are popular on Ford F700, F800, and F900 series trucks
- High-grade materials ensure quality performance over the lifetime of the tool
- Lifetime limited warranty
- See more on Amazon...
Brand: OTC | Manufacturer: OTC
Dimensions: 2.30 x 18.00 x 6.00 inches | Weight: 0.80 pounds
Warranty: Limited lifetime warranty
See On Amazon
Looking For Something Else?
Search