YG-1 E1070 High Speed Steel (HSS) Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 3.25" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080BVCSA | Model: 17071 | PartNumber: 17071 | Ean: 0733438170716 | UPC: 733438170716
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
High-Speed Steel For General-Purpose.
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- High-speed steel for general-purpose
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon Similar To YG1 E1070 High Speed Steel
#1
YG-1 17055HC HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiCN Finish, 2-1/2" Length, 3/8"
Asin: B0136HETFA | Model: 17055HC | PartNumber: 17055HC
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #2
YG-1 17047HC HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiCN Finish, 2-7/16" Length, 1/4"
Asin: B0136HEJ6Y | Model: 17047HC | PartNumber: 17047HC
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #3
YG-1 17071HC HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiCN Finish, 3-1/4" Length, 1/2"
Asin: B0136HEIUG | Model: 17071HC | PartNumber: 17071HC
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #4
YG-1 17051HC HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiCN Finish, 2-1/2" Length, 5/16"
Asin: B0136HE676 | Model: 17051HC | PartNumber: 17051HC
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #5
YG-1 17109HN HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiN Finish, 3-7/8" Length, 3/4"
Asin: B0136HDTX8 | Model: 17109HN | PartNumber: 17109HN
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #6
YG-1 17071HN HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiN Finish, 3-1/4" Length, 1/2"
Asin: B0136HDGEA | Model: 17071HN | PartNumber: 17071HN
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #7
YG-1 17047HN HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiN Finish, 2-7/16" Length, 1/4"
Asin: B0136HD5XC | Model: 17047HN | PartNumber: 17047HN
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #8
YG-1 17055HN HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiN Finish, 2-1/2" Length, 3/8"
Asin: B0136HD5TG | Model: 17055HN | PartNumber: 17055HN
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #9
YG-1 E1070 High Speed Steel (HSS) Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 4.5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080BVKHS | Model: 17176 | PartNumber: 17176 | Ean: 0733438171768 | UPC: 733438171768
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
High-Speed Steel For General-Purpose.
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- High-speed steel for general-purpose
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #10
YG-1 17219HE HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiAlN-Extreme Finish, 4-1/2" Length, 1-3/4"
Asin: B0136HJ798 | Model: 17219HE | PartNumber: 17219HE
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #11
YG-1 17195HE HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiAlN-Extreme Finish, 4-1/2" Length, 1-1/4"
Asin: B0136HJ5PE | Model: 17195HE | PartNumber: 17195HE
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #12
YG-1 17176HE HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiAlN-Extreme Finish, 4-1/2" Length, 1"
Asin: B0136HJ50O | Model: 17176HE | PartNumber: 17176HE
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #13
YG-1 17211HE HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiAlN-Extreme Finish, 4-1/2" Length, 1-1/2"
Asin: B0136HJ4UA | Model: 17211HE | PartNumber: 17211HE
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #14
YG-1 17227HE HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiAlN-Extreme Finish, 4-1/2" Length, 2"
Asin: B0136HIV5E | Model: 17227HE | PartNumber: 17227HE
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #15
YG-1 17062HE HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiAlN-Extreme Finish, 2-11/16" Length, 7/16"
Asin: B0136HIUI2 | Model: 17062HE | PartNumber: 17062HE
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
First Available: 05/15/2017
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #16
YG-1 17071HE HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiAlN-Extreme Finish, 3-1/4" Length, 1/2"
Asin: B0136HIS0C | Model: 17071HE | PartNumber: 17071HE
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #17
YG-1 17172HE HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiAlN-Extreme Finish, 4-1/8" Length, 1"
Asin: B0136HIRMQ | Model: 17172HE | PartNumber: 17172HE
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
First Available: 05/15/2017
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #18
YG-1 17144HE HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiAlN-Extreme Finish, 4-1/8" Length, 7/8"
Asin: B0136HIJHY | Model: 17144HE | PartNumber: 17144HE
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon #19
YG-1 17109HE HSS End Mill, 2 Flute, 42 Degree Helix, Regular Length for Aluminum, TiAlN-Extreme Finish, 3-7/8" Length, 3/4"
Asin: B0136HI9QU | Model: 17109HE | PartNumber: 17109HE
Yg-1 Is Based In South Korea.
Special Rake Angles And Low Micro Inch Finishes On The Primary Clearance Angles And Flute Faces Insure Free Cutting Action, Fine Finishes And Longer Tool Life For Both Non-Ferrous Materials As Well As Harder Alloys.
These Tools Are Made From Regular Hss(M2), Which Is Good For Aluminum Cutting.
High Performance.
Features
- The two flute end mills for aluminum have High Helix flute design making them well suited for milling aluminum and other non-ferrous materials
- High Performance
- YG-1 is based in South Korea
- These tools are made from regular HSS(M2), which is good for aluminum cutting
- Special rake angles and low micro inch finishes on the primary clearance angles and flute faces insure free cutting action, fine finishes and longer tool life for both non-ferrous materials as well as harder alloys
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 Pounds
See On Amazon
Looking For Something Else?
Search