YG-1 E2040 Cobalt Steel Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.25" Overall Length, 0.375" Cutting Diameter, 0.375" Shank Diameter
Asin: B0080CJC3Q | Model: 08305 | PartNumber: 08305
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Four flutes produce a better finish than fewer flutes
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon Similar To YG1 E2040 Cobalt Steel Square
#1
YG-1 E2080 Cobalt Steel Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 4.5" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CSNMC | Model: 02359 | PartNumber: 02359
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling.
Features
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #2
YG-1 E2248 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.75" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080CMI96 | Model: 73337 | PartNumber: 73337
Number Of Flutes Varies By Diameter For Optimum Feed And Cut Rate.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For A Range Of Materials.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Tooth Design And Tool Geometry Are Suitable For High-Production Metal Removal With A Fine Finish On A Range Of Materials.
Features
- Roughing-finishing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills and produce a finer finish than fine- or coarse-pitch roughers
- Tooth design and tool geometry are suitable for high-production metal removal with a fine finish on a range of materials
- Number of flutes varies by diameter for optimum feed and cut rate
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #3
YG-1 E2053 Cobalt Steel Square Nose End Mill, Double End, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4.125" Overall Length, 0.40625" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080C2R5Q | Model: 13309 | PartNumber: 13309
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling On A Range Of Materials.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
- Four flutes produce a better finish than fewer flutes
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling on a range of materials
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.01 pounds
See On Amazon #4
YG-1 E2079 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, Non-Center Cutting, 30 Deg Helix, 6 Flutes, 4.25" Overall Length, 1.125" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080BGF5K | Model: 70431 | PartNumber: 70431
Number Of Flutes Varies By Diameter For Optimum Feed And Cut Rate.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Fine-Pitch Tooth Design And Tool Geometry Are Suitable For Machining On A Range Of Materials.
Features
- Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills
- Fine-pitch tooth design and tool geometry are suitable for machining on a range of materials
- Number of flutes varies by diameter for optimum feed and cut rate
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #5
YG-1 S111 Cobalt Steel Throw-Away Drilling Insert, TiN Finish, 132 Degree, 51/64" Diameter, 5/32" Thick (Pack of 1)
Asin: B009WW601A | Model: S11160 | PartNumber: S11160
Reduce Set-Up Time, It Easily Can Be Replaced On The Machine.
Made Of Cobalt Steel.
For Use In High Temperature Alloys And Materials With 350~500 Brinell.
Features
- Throw-away drill insert
- For use in high temperature alloys and materials with 350~500 brinell
- Reduce set-up time, it easily can be replaced on the machine
- Made of cobalt steel
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1
Weight: 0.00 pounds
See On Amazon #6
YG-1 E2037 Cobalt Steel Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 6 Flutes, 10.5" Overall Length, 1.5" Cutting Diameter, 1.25" Shank Diameter
Asin: B0080D9B6S | Model: 06462 | PartNumber: 06462
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Square Nose End Mills (Also Called Square End) Create Sharp, Unrounded Cuts.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Six Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Extra-long-length end mills have longer cutting edges than long-length end mills for increased cutting length
- Six flutes produce a better finish than fewer flutes
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Square nose end mills (also called square end) create sharp, unrounded cuts
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #7
YG-1 E2036 Cobalt Steel Square Nose End Mill, Extra Long Reach, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 6.25" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080D9938 | Model: 06359 | PartNumber: 06359 | Ean: 0662386063590 | UPC: 662386063590
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Square Nose End Mills (Also Called Square End) Create Sharp, Unrounded Cuts.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Extra-long-length end mills have longer cutting edges than long-length end mills for increased cutting length
- Four flutes produce a better finish than fewer flutes
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Square nose end mills (also called square end) create sharp, unrounded cuts
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.70 pounds
See On Amazon #8
YG-1 E2161 Cobalt Steel Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 1.65625" Overall Length, 0.1875" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CJLXC | Model: 23273 | PartNumber: 23273
Center-Cutting Design Allows The End Mill To Plunge Into Material Like A Drill Bit While Also Performing Conventional Surface Milling.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For A Range Of Materials.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Features
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Dimensions: 38.00 x 38.00 x 14.50 inches
See On Amazon #9
YG-1 E2086 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, 30 Deg Helix, 3 Flutes, 2.875" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CIXSG | Model: 72359 | PartNumber: 72359
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Ball Nose End Mills (Also Called Ball End) Create Contoured Surfaces.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for copy milling and deep cutting of dies and molds with a corner radius on a range of materials
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Ball nose end mills (also called ball end) create contoured surfaces
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #10
YG-1 E2031 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 3.375" Overall Length, 0.625" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080BZN2G | Model: 04336 | PartNumber: 04336 | Ean: 0899184604773 | UPC: 899184604773
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Non-Center-Cutting Design Is Suitable For Peripheral Milling And Allows End To Be Resharpened.
Square Nose End Mills (Also Called Square End) Create Sharp, Unrounded Cuts.
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Features
- Four flutes produce a better finish than fewer flutes
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Square nose end mills (also called square end) create sharp, unrounded cuts
- Non-center-cutting design is suitable for peripheral milling and allows end to be resharpened
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #11
YG-1 E2039 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4.125" Overall Length, 0.875" Cutting Diameter, 0.875" Shank Diameter
Asin: B0080B61WM | Model: 07394 | PartNumber: 07394 | Ean: 5915903873505
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Square Nose End Mills (Also Called Square End) Create Sharp, Unrounded Cuts.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Four Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Center-cutting design allows the end mill to plunge into material like a drill bit for applications such as slotting, drilling, and profiling on a range of materials
- Four flutes produce a better finish than fewer flutes
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Square nose end mills (also called square end) create sharp, unrounded cuts
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon
Looking For Something Else?
Search