YG-1 - 2558 E5011 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.25" Overall Length, 0.125" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080CPUIW | Model: 02558 | PartNumber: 02558
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 Pounds
See On Amazon Similar To YG1 2558 E5011 Carbide Square
#1
YG-1 E5020 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 1.5" Overall Length, 0.0937" Cutting Diameter, 0.125" Shank Diameter
Asin: B0080B6L5Y | Model: 01556 | PartNumber: 01556
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Suitable For Machining On Hardened And High-Alloy Steel, Chromium-Nickel Steel, Steel Casting, Malleable Cast Iron, Brass, Copper, Aluminum With A High Percentage Of Silicon, And Abrasive Plastic.
Features
- Center-cutting design allows the end mill to plunge into material like a drill bit for applications such as slotting, drilling, and pocketing, as well as general-purpose machining
- Suitable for machining on hardened and high-alloy steel, chromium-nickel steel, steel casting, malleable cast iron, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.07 pounds
See On Amazon #2
YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CKBEA | Model: 40573 | PartNumber: 40573
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Extended-Reach Neck Style Provides Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Extended-reach neck style provides access to recessed areas of the workpiece
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.10 pounds
See On Amazon #3
YG-1 E5982 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 6" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080BKBPK | Model: 36598 | PartNumber: 36598
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Standard-Length End Mills.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #4
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 6" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJYAW | Model: 39904 | PartNumber: 39904 | Ean: 0300878206475 | UPC: 300878206475
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 pounds
See On Amazon #5
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 37 Deg Helix, 2 Flutes, 4" Overall Length, 0.25" Cutting Diameter, 0.25" Shank Diameter
Asin: B0080CJOLQ | Model: 39573 | PartNumber: 39573 | Ean: 0300878206291 | UPC: 300878206291
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
First Available: 12/12/2017
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.05 Pounds
See On Amazon #6
YG-1 E5980 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 2.5" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080BTAWK | Model: 25593 | PartNumber: 25593 | Ean: 0300878207823 | UPC: 300878207823
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #7
YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 7" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CKJGU | Model: 40906 | PartNumber: 40906 | Ean: 0733438409069 | UPC: 733438409069
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Extended-Reach Neck Style Provides Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Extended-reach neck style provides access to recessed areas of the workpiece
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #8
YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 6" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080CKHF8 | Model: 40903 | PartNumber: 40903 | Ean: 0300878207229 | UPC: 300878207229
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Extended-Reach Neck Style Provides Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Extended-reach neck style provides access to recessed areas of the workpiece
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #9
YG-1 E5977 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 37 Deg Helix, 3 Flutes, 6" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080CKGRM | Model: 40902 | PartNumber: 40902 | Ean: 0733438409021 | UPC: 733438409021
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Extended-Reach Neck Style Provides Access To Recessed Areas Of The Workpiece.
Features
- Suitable for high-performance machining on aluminum and other nonferrous materials
- Extended-reach neck style provides access to recessed areas of the workpiece
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #10
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 7" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJYSY | Model: 39905 | PartNumber: 39905 | Ean: 0300878206499 | UPC: 300878206499
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #11
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 7" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080CJXR6 | Model: 39903 | PartNumber: 39903 | Ean: 0300878206437 | UPC: 300878206437
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #12
YG-1 E5976 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, Finishing Cut, 37 Deg Helix, 2 Flutes, 5" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080CJUA6 | Model: 39598 | PartNumber: 39598 | Ean: 0300878206451 | UPC: 300878206451
Long-Reach End Mills Have An Extended Shank For Access To Recessed Areas Of The Workpiece.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
37-Degree Helix Angle Provides Increased Cutting Action And Chip Evacuation Compared To The Standard 30-Degree Helix.
Features
- Suitable for high-performance machining and step milling on aluminum and other nonferrous materials
- 37-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Long-reach end mills have an extended shank for access to recessed areas of the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.00 Pounds
See On Amazon #13
YG-1 E5244 Carbide Square Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.5" Overall Length, 0.5" Cutting Diameter, 0.5" Shank Diameter
Asin: B0080CDPWU | Model: 30593 | PartNumber: 30593
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Broad Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #14
YG-1 E5066 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 45 Deg Helix, 5 Flutes, 3" Overall Length, 0.75" Cutting Diameter, 0.75" Shank Diameter
Asin: B0080C9LT6 | Model: 85598 | PartNumber: 85598
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Five Flutes Produce A Better Finish Than Fewer Flutes.
Stub Length Increases The Strength Of The Tool, Making It Less Likely To Break In The Workpiece.
Features
- Suitable for general-purpose machining on materials such as stainless steel and nickel-based alloys
- Stub length increases the strength of the tool, making it less likely to break in the workpiece
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Five flutes produce a better finish than fewer flutes
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
Weight: 0.60 Pounds
See On Amazon #15
YG-1 E5254 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Finishing Cut, 42 Deg Helix, 2 Flutes, 3.5" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter
Asin: B0080C8SW2 | Model: 21595 | PartNumber: 21595 | Ean: 0300878205805 | UPC: 300878205805
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Low Surface Roughness On The Cutting Edge Reduces Friction And Prevents Chips From Sticking To The Tool.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for high-performance plunging and machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Low surface roughness on the cutting edge reduces friction and prevents chips from sticking to the tool
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #16
YG-1 E5253 Carbide Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 42 Deg Helix, 2 Flutes, 5.5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080C64IW | Model: 18600 | PartNumber: 18600 | Ean: 0300878205157 | UPC: 300878205157
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Low Surface Roughness On The Cutting Edge Reduces Friction And Prevents Chips From Sticking To The Tool.
42-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Features
- Suitable for high-performance plunging and machining on aluminum and other nonferrous materials
- 42-degree helix provides increased cutting action compared to end mills with lower helix angles
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- Low surface roughness on the cutting edge reduces friction and prevents chips from sticking to the tool
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #17
YG-1 E5067 Carbide Square Nose End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 45 Deg Helix, 5 Flutes, 4" Overall Length, 0.875" Cutting Diameter, 0.875" Shank Diameter
Asin: B0080BDNQ4 | Model: 86599 | PartNumber: 86599
45-Degree Helix Provides Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Five Flutes Produce A Better Finish Than Fewer Flutes.
Features
- Suitable for general-purpose machining on stainless steel and nickel-based alloys
- Five flutes produce a better finish than fewer flutes
- 45-degree helix provides increased cutting action compared to end mills with lower helix angles
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #18
YG-1 E5981 Carbide Square Nose End Mill, Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0080B0KWO | Model: 28600 | PartNumber: 28600
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Square Nose End Mills (Also Called Square End) Create Sharp, Unrounded Cuts.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Geometry Allows For High Cutting Speeds, Smooth Cutting Action, And Stability.
Features
- 45-degree helix provides efficient cutting action and chip evacuation required to machine aluminum and other nonferrous materials
- Geometry allows for high cutting speeds, smooth cutting action, and stability
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Square nose end mills (also called square end) create sharp, unrounded cuts
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon #19
YG-1 E5983 Carbide Corner Radius End Mill, Long Reach, Uncoated (Bright) Finish, Finishing Cut, Non-Center Cutting, 45 Deg Helix, 3 Flutes, 3.5" Overall Length, 0.625" Cutting Diameter, 0.625" Shank Diameter, 0.06" Corner Radius
Asin: B0080CWM06 | Model: EA50401 | PartNumber: EA50401 | Ean: 0300878208226 | UPC: 300878208226
45-Degree Helix Offers Increased Cutting Action Compared To End Mills With Lower Helix Angles.
Carbide Can Run At Higher Speeds Than High-Speed Or Cobalt Steel, Resisting Wear And High Cutting Temperatures.
Three Flutes Provide Better Chip-Carrying Capacity Than Four Flutes And A Finer Finish Than Two, Reducing The Need For A Second Finishing Cut In Some Applications.
Suitable For High-Performance Machining On Aluminum And Other Nonferrous Materials.
Features
- Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life
- Suitable for high-performance machining on aluminum and other nonferrous materials
- 45-degree helix offers increased cutting action compared to end mills with lower helix angles
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- See more on Amazon...
Brand: YG-1 | Manufacturer: YG-1 Tool Company
See On Amazon
Looking For Something Else?
Search