Melin Tool E-M Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 5.5000" Overall Length, 1" Cutting Diameter, 1" Shank Diameter
Asin: B0083LQNEU | Model: 12292 | PartNumber: 12292 | Ean: 0733438122920 | UPC: 733438122920
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
Used For General Purpose Milling In Mos Materials Of Medium And Tough Alloy Materials Such As Stainless Steel, Nickel Base Alloy, Brass, Iron Etc.
3 Flutes Usually Allow Feed Rates 50 Percent Faster Than 2 Flute Tools.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- 3 flutes usually allow feed rates 50 percent faster than 2 flute tools
- Used for general purpose milling in mos materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
Amazon Price: $46.29 | as of 06/17/2024
(10:08pm pst) *DETAILSAvailability: Temporarily out of stock. We are working hard to be back in stock. Place your order and we’ll email you when we have an estimated delivery date. You won’t be charged until the item ships.
See On Amazon Similar To Melin Tool EM Cobalt Steel
#1
Melin Tool CFP Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 3.8750" Overall Length, 0.7500" Cutting Diameter, 0.625" Shank Diameter
Asin: B0083LGS0E | Model: 15696 | PartNumber: 15696 | Ean: 0733438156963 | UPC: 733438156963
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
These Will Not Plunge Cut.
A Rough Finish Is Produced Which May Require A Finishing Pass.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- A rough finish is produced which may require a finishing pass
- These will not plunge cut
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #2
Melin Tool A-E Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 4.7500" Overall Length, 0.4375" Cutting Diameter, 0.3750" Shank Diameter
Asin: B0083IYYF8 | Model: 12836 | PartNumber: 12836 | Ean: 0733438128366 | UPC: 733438128366
Cobalt Steel Resists Abrasion And High Cutting Temperatures, And Has Higher Feed Rates Than High-Speed Steel.
Two Flutes Offer Better Chip-Carrying Capacity Than End Mills With More Flutes, Enhancing The Tool’S Ability To Remove Material.
Uncoated (Bright) Tools Have No Additional Surface Treatment Or Coating For Use On A Range Of Materials.
Extra-Long-Length End Mills Have Longer Cutting Edges And Can Make Deeper Cuts Than Long-Length End Mills.
Features
- Suitable for general-purpose machining on most medium-hardness and tough materials, including stainless steel, nickel-based alloys, brass, and iron
- Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills
- Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
- Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool s ability to remove material
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #3
Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 4.1875" Overall Length, 0.875" Cutting Diameter, 0.75" Shank Diameter
Asin: B002060SAO | Model: 15454 | PartNumber: 15454 | Ean: 0733438154549 | UPC: 733438154549
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For General Purpose Milling In Most Materials Of Medium And Tough Alloy Materials Such As Stainless Steel, Nickel Base Alloy, Brass, Iron Etc.
Can Be Used For Drilling, Slotting, Chamfering, And Profile Milling.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can be used for drilling, slotting, chamfering, and profile milling
- Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc
- See more on Amazon...
First Available: 05/15/2017
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #4
Melin Tool E Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 3.6250" Overall Length, 0.7813" Cutting Diameter, 0.5" Shank Diameter
Asin: B0083LO8KG | Model: 12068 | PartNumber: 12068 | Ean: 0733438120681 | UPC: 733438120681
Weldon Shanks Feature A Round Shank With One Of More Flats Machined Into The Side For Easy Indexing And Alignment.
Used For General Purpose Milling In Mos Materials Of Medium And Tough Alloy Materials Such As Stainless Steel, Nickel Base Alloy, Brass, Iron Etc.
3 Flutes Usually Allow Feed Rates 50 Percent Faster Than 2 Flute Tools.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment
- 3 flutes usually allow feed rates 50 percent faster than 2 flute tools
- Used for general purpose milling in mos materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #5
Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 4.25" Overall Length, 1" Cutting Diameter, 0.75" Shank Diameter
Asin: B0083IY48A | Model: 16046 | PartNumber: 16046 | Ean: 0733438160465 | UPC: 733438160465
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For General Purpose Milling In Most Materials Of Medium And Tough Alloy Materials Such As Stainless Steel, Nickel Base Alloy, Brass, Iron Etc.
Can Be Used For Drilling, Slotting, Chamfering, And Profile Milling.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can be used for drilling, slotting, chamfering, and profile milling
- Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon
Looking For Something Else?
Search