Melin Tool EMG-B Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 1.5000" Overall Length, 0.0938" Cutting Diameter, 0.125" Shank Diameter
Asin: B0083LT1EE | Model: 17822 | PartNumber: 17822 | Ean: 0733438178224 | UPC: 733438178224
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Nonferrous Materials.
3 Flute Design Will Usually Allow Feed Rates 50 Percent Faster Than 2 Flute Tools.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- 3 flute design will usually allow feed rates 50 percent faster than 2 flute tools
- Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and nonferrous materials
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon Similar To Melin Tool EMGB Carbide Ball
#1
Melin Tool-16100 RCMG Carbide Corner Rounding End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 4 Flutes, 2.5000" Overall Length, 0.125" Cutting Diameter, 0.25" Shank Diameter
Asin: B0006Q44QO | Model: 16100 | PartNumber: 16100 | Ean: 0733438161004 | UPC: 733438161004
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Radius Is Form Relieved.
Can Provide Uniform Finish On Corners.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can provide uniform finish on corners
- Radius is form relieved
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #2
Melin Tool CCMGS-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000" Overall Length, 0.1563" Cutting Diameter, 0.1875" Shank Diameter
Asin: B0083LBFUW | Model: 56244 | PartNumber: 56244 | Ean: 0733438562443 | UPC: 733438562443
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Designed To Cut Materials Ranging From Nickel Base Alloy, Stainless, Tough Alloys, Abrasive And Nonferrous.
Use For Radius And Contouring Part Surfaces.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- Use for radius and contouring part surfaces
- Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #3
Melin Tool - 57832 EMG-B Carbide Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 3 Flutes, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter
Asin: B0083LSLWW | Model: 57832 | PartNumber: 57832 | Ean: 0733438578321 | UPC: 733438578321
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Nonferrous Materials.
3 Flute Design Will Usually Allow Feed Rates 50 Percent Faster Than 2 Flute Tools.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- 3 flute design will usually allow feed rates 50 percent faster than 2 flute tools
- Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and nonferrous materials
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #4
Melin Tool BRMG Carbide Corner Rounding End Mill, Double End, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 2 Flutes, 2.5000" Overall Length, 0.095" Cutting Diameter, 0.3125" Shank Diameter
Asin: B0006Q44O6 | Model: 16308 | PartNumber: 16308 | Ean: 0733438163084 | UPC: 733438163084
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Radius Is Form Relieved.
Can Provide Uniform Finish On Corners.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can provide uniform finish on corners
- Radius is form relieved
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #5
Melin Tool AMGS-M-M-B Carbide Ball Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 51mm Overall Length, 8mm Cutting Diameter, 8mm Shank Diameter
Asin: B0083K1QMU | Model: 13741 | PartNumber: 13741 | Ean: 0733438137412 | UPC: 733438137412
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For Applications In Steel And Non-Ferrous Materials.
Ball Nose End.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Ball nose end
- For applications in steel and non-ferrous materials
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #6
Melin Tool RMG Carbide Corner Rounding End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 3 Flutes, 2.5000" Overall Length, 0.125" Cutting Diameter, 0.25" Shank Diameter
Asin: B0006Q6F34 | Model: 16093 | PartNumber: 16093 | Ean: 0733438160939 | UPC: 733438160939
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Radius Is Form Relieved.
Can Provide Uniform Finish On Corners.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can provide uniform finish on corners
- Radius is form relieved
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #7
Melin Tool RCMG Carbide Corner Rounding End Mill, Uncoated (Bright) Finish, Non-Center Cutting, 0 Deg Helix, 4 Flutes, 3" Overall Length, 0.25" Cutting Diameter, 0.5" Shank Diameter
Asin: B0006Q44SC | Model: 16102 | PartNumber: 16102 | Ean: 0733438161028 | UPC: 733438161028
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Radius Is Form Relieved.
Can Provide Uniform Finish On Corners.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Can provide uniform finish on corners
- Radius is form relieved
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
Weight: 0.15 pounds
See On Amazon #8
Melin Tool VXMG Carbide Corner Radius End Mill, Variable Helix, nACo Monolayer Finish, Roughing Cut, Helix, 4 Flutes, 2" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter, 0.030" Corner Radius
Asin: B0083LYR8E | Model: 15753 | PartNumber: 15753 | Ean: 0733438157533 | UPC: 733438157533
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Enables Higher Spindle Speed And Heavier Chip Loads.
Provides Chatter-Free Machining.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Provides Chatter-Free machining
- Enables higher spindle speed and heavier chip loads
- See more on Amazon...
First Available: 05/15/2017
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #9
Melin Tool VXMG Carbide Corner Radius End Mill, Variable Helix, nACo Monolayer Finish, Roughing Cut, Helix, 4 Flutes, 3" Overall Length, 0.5000" Cutting Diameter, 0.5" Shank Diameter, 0.06" Corner Radius
Asin: B0083LXUJQ | Model: 15829 | PartNumber: 15829 | Ean: 0733438158295 | UPC: 733438158295
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Enables Higher Spindle Speed And Heavier Chip Loads.
Provides Chatter-Free Machining.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Provides Chatter-Free machining
- Enables higher spindle speed and heavier chip loads
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
Weight: 0.30 pounds
See On Amazon #10
Melin Tool HMG-M-M-B Carbide Ball Nose End Mill, Metric, nACo Monolayer Finish, Roughing Cut, 15 Deg Helix, 2 Flutes, 100mm Overall Length, 8mm Cutting Diameter, 8mm Shank Diameter
Asin: B0083LX72Q | Model: 13460 | PartNumber: 13460 | Ean: 0733438134602 | UPC: 733438134602
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Use Air Mist Coolant For Materials Harder Than Rc40.
Naco Coated For Durability.
Naco Coated For Durability.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- nACo coated for durability
- Round shanks allow use with a wide variety of toolholding systems
- nACo coated for durability
- Use air mist coolant for materials harder than RC40
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #11
Melin Tool HMG-B Carbide Ball Nose End Mill, nACo Monolayer Finish, Roughing Cut, 15 Deg Helix, 2 Flutes, 3" Overall Length, 0.0938" Cutting Diameter, 0.125" Shank Diameter
Asin: B0083LX3SY | Model: 13486 | PartNumber: 13486 | Ean: 0733438134862 | UPC: 733438134862
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Use Air Mist Coolant For Materials Harder Than Rc40.
Naco Coated For Durability.
Naco Coated For Durability.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- nACo coated for durability
- Round shanks allow use with a wide variety of toolholding systems
- nACo coated for durability
- Use air mist coolant for materials harder than RC40
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #12
Melin Tool EMGS-B Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 2" Overall Length, 0.3125" Cutting Diameter, 0.3125" Shank Diameter
Asin: B0083LW1K0 | Model: 17834 | PartNumber: 17834 | Ean: 0733438178347 | UPC: 733438178347
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Nonferrous Materials.
3 Flute Design Will Usually Allow Feed Rates 50 Percent Faster Than 2 Flute Tools.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- 3 flute design will usually allow feed rates 50 percent faster than 2 flute tools
- Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and nonferrous materials
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #13
Melin Tool EMGS Carbide Square Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 3 Flutes, 2.5000" Overall Length, 0.5000" Cutting Diameter, 0.5" Shank Diameter
Asin: B0083LVGBK | Model: 57809 | PartNumber: 57809 | Ean: 0733438578093 | UPC: 733438578093
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Used For General Purpose Milling In Most Materials Of Medium Hardness Such As Steel, Brass, Iron, And Non-Ferrous Materials.
3 Flute Design Will Usually Allow Feed Rates 50 Percent Faster Than 2 Flute Tools.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- 3 flute design will usually allow feed rates 50 percent faster than 2 flute tools
- Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #14
Melin Tool CCMGS-M-M-B Carbide Ball Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 51mm Overall Length, 8mm Cutting Diameter, 8mm Shank Diameter
Asin: B0083LCGS2 | Model: 19729 | PartNumber: 19729 | Ean: 0733438197294 | UPC: 733438197294
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
For Applications In Steel And Non-Ferrous Materials.
Ball Nose End.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Ball nose end
- For applications in steel and non-ferrous materials
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #15
Melin Tool CCMGS-B Carbide Ball Nose End Mill, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 2" Overall Length, 0.2500" Cutting Diameter, 0.25" Shank Diameter
Asin: B0083LBKNE | Model: 16247 | PartNumber: 16247 | Ean: 0733438162476 | UPC: 733438162476
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Designed To Cut Materials Ranging From Nickel Base Alloy, Stainless, Tough Alloys, Abrasive And Nonferrous.
Use For Radius And Contouring Part Surfaces.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Use for radius and contouring part surfaces
- Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and nonferrous
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #16
Melin Tool CCMGS-B Carbide Micro Ball Nose End Mill, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 1.5000" Overall Length, 0.0120" Cutting Diameter, 0.125" Shank Diameter
Asin: B0083LA4JK | Model: 58863 | PartNumber: 58863 | Ean: 0733438588634 | UPC: 733438588634
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
30 Degree Helix Angle.
Ball Nose End.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- Ball nose end
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #17
Melin Tool CCMG-M-M-LB Carbide Ball Nose End Mill, Metric, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 64mm Overall Length, 5mm Cutting Diameter, 5mm Shank Diameter
Asin: B0083KYX02 | Model: 54029 | PartNumber: 54029 | Ean: 0733438540298 | UPC: 733438540298
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
30 Degree Helix Angle.
Ball Nose End.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- Ball nose end
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #18
Melin Tool CCMG-M-M-B Carbide Ball Nose End Mill, Metric, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 70mm Overall Length, 10mm Cutting Diameter, 10mm Shank Diameter
Asin: B0083KY2SA | Model: 16583 | PartNumber: 16583 | Ean: 0733438165835 | UPC: 733438165835
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
30 Degree Helix Angle.
For Applications In Steel And Non-Ferrous Materials.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- For applications in steel and non-ferrous materials
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon #19
Melin Tool CCMG-M-M-B Carbide Ball Nose End Mill, Metric, AlTiN Monolayer Finish, 30 Deg Helix, 4 Flutes, 89mm Overall Length, 14mm Cutting Diameter, 14mm Shank Diameter
Asin: B0083KXKO2 | Model: 56585 | PartNumber: 56585 | Ean: 0733438565857 | UPC: 733438565857
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
30 Degree Helix Angle.
For Applications In Steel And Non-Ferrous Materials.
Aluminum Titanium Nitride Is Similar To Tialn But With A Higher Aluminum Content For Improved Hardness And Smoothness.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness
- Round shanks allow use with a wide variety of toolholding systems
- For applications in steel and non-ferrous materials
- 30 Degree helix angle
- See more on Amazon...
Brand: Melin Tool | Manufacturer: Melin Tool Company
See On Amazon
Looking For Something Else?
Search