uxcell 12 Pcs Power Drill Polishing Part 8mm Dia. Cone Felt Bobs 3mm Shank
Asin: B008OTLSLY | Model: a12051500ux0088 | PartNumber: a12051500ux0088
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Material : Felt, Metal;Color : White, Silver Tone.
Package Content : 12 X Felt Bob.
Weight : 22G.
Shank Diameter : 3Mm / 0.12";Total Length : 46Mm / 1.81".
Features
- Product Name : Mounted Felt Bob;Felt Size : 8 x 18mm / 0.31" x 0.7" (D*L)
- Shank Diameter : 3mm / 0.12;Total Length : 46mm / 1.81
- Material : Felt, Metal;Color : White, Silver Tone
- Weight : 22g
- Package Content : 12 x Felt Bob
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon Similar To uxcell 12 Pcs Power Drill
#1
uxcell Drill Press Spring Drill Press Quill Feed Return Coil Spring Assembly Spring Steel Chemical Blackening Finish 680mm Expand Long 36x6x0.65mm 2 Pcs
Asin: B07MX8JZX1 | Model: a18120800ux0210 | PartNumber: a18120800ux0210
☆ The Drill Press Quill Return Spring Is Good Replacement For Many Existing Quill Spring Drill Presses, This Spring Will Returns The Quill To The Top After You Have Completed Drilling.Used To All Kinds Of Vacuum Cleaner Coil Spring, Volume Tube Coil Spring, And So On..
☆ Pay Attention When Installing Springs. Do Not Loosen The Wire Of Fixed Springs! When Installing, Install The Spring With A Fixed Wire Directly Into The Spring Seat, And The Wire Will Slide Out..
☆ Chemical Blackening, The Performance Of The Product Form Oxide Film, Isolate The Air, Prevent Rust..
Inner Mounting Type : Hook; Outer Mounting Type : Hook，Pack With 2 X Drill Press Spring.
Features
- Expand Length : 680mm/26.8inch ; Spring OD : 36mm ; Material Width : 6mm ; Material Thickness : 0.65mm
- Inner Mounting Type : Hook; Outer Mounting Type : Hook Pack with 2 x Drill Press Spring
- The drill press quill return spring is good replacement for many existing quill spring drill presses, this spring will returns the quill to the top after you have completed drilling.Used to all kinds of vacuum cleaner coil spring, volume tube coil spring, and so on.
- Chemical Blackening, the performance of the product form oxide film, isolate the air, prevent rust.
- Pay attention when installing springs. Do not loosen the wire of fixed springs! When installing, install the spring with a fixed wire directly into the spring seat, and the wire will slide out.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.57 x 3.94 x 1.97 Inches
See On Amazon #2
LMioEtool ABS Plastic Dustproof Waterproof IP65 Junction Box Hinged Shell Universal Electrical Project Enclosure Gray, with PC Transparent Clear Cover 5.9 x 3.9 x 2.8inch(150 x100 x70mm)
Asin: B07PK8K8S2 | Model: lm202205201502_P10 | PartNumber: lm202205201502_P10 | Ean: 0714453117665 | UPC: 714453117665
The Enclosure Box Features Two Or Three Plastic Latches For Added Security And Locking; Moisture Proof, Sunscreen, Anti-Corrosion, Durable For Years Use..
Outer Size(Approx.):5.9" X 3.9" X 2.8"/150Mmx100mmx70mm (L*W*H); Inner Size(Approx.): 5.2" X 3.2" X 2.6"/132Mm X 82Mm X 65Mm(L*W*H)- -* Tips: In Order To Confirm The Detailed Installation Dimensions, Please Refer To Our Detail Image, Which Shows Specific Internal Dimensions Of The Product. (Allowable Error: 2Mm)..
This Electrical Junction Box Is Easy To Operate And Repair, No Cable Cutting, More Convenient..
Material: Abs,Pc ; Net Weight: 180G; Main Color: Light Gray (For Box Body), Transparent（For Box Cover）.
Features
- Product Name : Junction box; Waterproof rating : IP65.
- Material: ABS,PC ; Net Weight: 180g; Main Color: Light Gray (For Box Body), Transparent For box cover
- The Enclosure box features two or three plastic latches for added security and locking; moisture proof, sunscreen, anti-corrosion, durable for years use.
- This electrical junction box is easy to operate and repair, no cable cutting, more convenient.
- Outer Size(Approx.):5.9 x 3.9 x 2.8/150mmx100mmx70mm (L*W*H); Inner Size(Approx.): 5.2 x 3.2 x 2.6/132mm x 82mm x 65mm(L*W*H)- -* Tips: in order to confirm the detailed installation dimensions, please refer to our detail image, which shows specific internal dimensions of the product. (Allowable Error: 2mm).
- See more on Amazon...
Brand: LMioEtool | Manufacturer: LMioEtool
Dimensions: 2.80 x 5.90 x 4.30 Inches
See On Amazon #3
uxcell 6203-1/2-2RS Deep Groove Ball Bearings 1/2-inch Inner Dia 40mm OD 12mm Bore Double Sealed Chrome Steel Z2 2pcs
Asin: B082PZ3Q1B | Model: a19092000ux1145 | PartNumber: a19092000ux1145
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 4800 Newtons And Dynamic Load Rating Of 9550 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
6203-1/2 2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- 6203-1/2-2RS (I.D.=1/2-inch, O.D.=40mm, Thickness=12mm)
- 6203-1/2 2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 4800 newtons and dynamic load rating of 9550 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.33 pounds
See On Amazon #4
uxcell Straight Shank Twist Drill Bits 12mm High Speed Steel 4341 with 12mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082D9FLX6 | Model: a19102500ux0144 | PartNumber: a19102500ux0144
Sharp Spiral Flutes: Provide Neat And Smooth Cuts. High Cutting Edge Strength, Fast Cutting Speed. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Clamping Stable Round Shank Design, Not Easy To Shake, Tight Clamping Without Slipping.
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant.
High Speed Steel Tool: High-Speed Steel Straight Shank Tool Is Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance.
Features
- Features: Cutting Edge Diameter : 12mm / 0.47"; Shank Diameter : 12mm / 0.47"; Cutting Edge Length: 102mm / 4.02"; Total Length : 150mm / 5.91"; Cutting Direction: Right Hand
- High Speed Steel Tool: High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
- Sharp Spiral Flutes: Provide neat and smooth cuts. High cutting edge strength, fast cutting speed. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Clamping stable round shank design, not easy to shake, tight clamping without slipping
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 Pounds
See On Amazon #5
uxcell TC613 Thrust Needle Roller Bearings with Washers 3/8" Bore 13/16" OD 5/64" Width 5pcs
Asin: B07VWT1X34
[Features] - Needle Roller Thrust Bearings Can Accommodate Axial Loads In One Direction Only.
[Capability] - 12.18Kn Static Load Capacity, 4.84Kn Dynamic Load Capacity, 23000Rpm Maximum Rotational Speed.
[Washer] - Combined With 2 Washers For Applications Where Adjacent Machine Components Cannot Serve As Raceways.
[Material] - Chromium Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODLE] - Bearing Model: TC613 (I.D.=3/8", O.D.=13/16", Thickness=5/64"); Washer Model: TRA613
- [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
- [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
- [CAPABILITY] - 12.18kN Static Load Capacity, 4.84kN Dynamic Load Capacity, 23000RPM Maximum Rotational Speed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #6
uxcell MR128-2RS Deep Groove Ball Bearings 8mm Inner Dia 12mm OD 3.5mm Bore Double Sealed Chrome Steel Blue Seal Z2 10pcs
Asin: B082PPLHLQ | Model: a19092000ux1288 | PartNumber: a19092000ux1288
Made From Chrome Steel (Gcr15), Durability And Resistance To Under Heavy Loads.
Static Load Rating Of 219 Newtons And Dynamic Load Rating Of 462 Newtons.
Abec Tolerance 1 (P0), Z2 Noise Level For Most General Use.
Mr128-2Rs Bearings Are Sealed On Both Sides To Keep Lubricant In.
Features
- MR128-2RS (I.D.=8mm, O.D.=12mm, Thickness=3.5mm)
- mr128-2rs bearings are sealed on BOTH SIDES to keep lubricant in
- Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
- ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
- Static load rating of 219 newtons and dynamic load rating of 462 newtons
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.05 pounds
See On Amazon #7
uxcell Reduced Shank Twist Drill Bits 12mm High Speed Steel 6542 with 10mm Shank for Stainless Steel Alloy Metal Plastic Wood
Asin: B082CYCRDY | Model: a19102500ux0077 | PartNumber: a19102500ux0077
Reduced Shank: Reduced Shank Drill Expands The Size Range Capacity Of A Portable Drill Chuck. Common Flute And Overall Length For Minimal Adjustment During Tool Changes. Sharp And Spiral Cutting Edge Provides Neat And Smooth Cuts..
Versatile Uses: For Use In A Wide Range Of Stainless Steel, Aluminum Alloy, Iron, Copper, Brass, Wood, Plastic, And Other Metal Materials. Suitable For Hand Drills, Bench Drills, Etc. Tri-Flat On The Shank Of Drills Are Constructed For Tighter Chucking Maximizing Security For Precise Holes..
Black & Gold Oxide Finish: Premium Gold Titanium And Black Nitride Dual Coating Can Apply Lubricant Better For Smoother Drilling And Is More Durable And Corrosion Resistant. Spiral Groove Facilitates The Export Of Metal Chip, Saving Time And Effort In Operation..
High Speed Steel Tool: The Twist Drill Bits Are Good For Most General Purpose Applications, Offering A Combination Of Hardness And Toughness For Wear Resistance. High Cutting Edge Strength, Fast Cutting Speed..
Features
- Features: Cutting Edge Diameter : 12mm / 0.47"; Shank Diameter : 10mm / 0.39"; Cutting Edge Length: 63mm / 2.48"; Total Length : 150mm / 6.0"; Cutting Direction: Right Hand
- High Speed Steel Tool: The twist drill bits are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. High cutting edge strength, fast cutting speed.
- Reduced Shank: Reduced shank drill expands the size range capacity of a portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Sharp and spiral cutting edge provides neat and smooth cuts.
- Black & Gold Oxide Finish: Premium gold titanium and black nitride dual coating can apply lubricant better for smoother drilling and is more durable and corrosion resistant. Spiral groove facilitates the export of metal chip, saving time and effort in operation.
- Versatile Uses: For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass, wood, plastic, and other metal materials. Suitable for hand drills, bench drills, etc. Tri-flat on the shank of drills are constructed for tighter chucking maximizing security for precise holes.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #8
uxcell 3-Inch Sanding Sponge Hook and Loop Sanding Disc Wet/Dry for Car Wood Drywall Metal Brown Corundum 3000 Grit 12 Pcs
Asin: B0821WJX6Y | Model: a19102800ux0170 | PartNumber: a19102800ux0170
Sponge Sanding: Sponge Texture, Light And Elastic, Suitable For Irregular Surface Grinding, Can Absorb Water, And Keep Grinding With Water For A Long Time..
Wide Applications: Flocking Sponge Sandpaper Sander Pads, Used With The Random Orbital Sander, Suitable For Polishing Furniture, Plastic Products, Car Repair Paint, Metal Rust, Etc..
Hook And Loop Backing: Makes Grit Changes Quick And Easy, And Lengthens The Life Of The Abrasive. The Back Of The Sanding Disc Has The One Side Of The Hook And Loop And The Orbital Sander Has The Other Half So It Sticks To The Sander..
Wet And Dry Polish: These Foam Sanding Discs Can Be Applied To Both Wet And Dry Use, Washable And Reusable..
Features
- Size: The hook and loop sanding disc diameter is 3-inch, 3000 grits. (Note: To better protect the sand surface, our product is packaged as two pieces facing each other. Before use, you need to separate them first)
- Wet and Dry Polish: These foam sanding discs can be applied to both wet and dry use, washable and reusable.
- Sponge Sanding: Sponge texture, light and elastic, suitable for irregular surface grinding, can absorb water, and keep grinding with water for a long time.
- Hook and Loop Backing: Makes grit changes quick and easy, and lengthens the life of the abrasive. The back of the sanding disc has the one side of the hook and loop and the orbital sander has the other half so it sticks to the sander.
- Wide Applications: Flocking sponge sandpaper sander pads, used with the random orbital sander, suitable for polishing furniture, plastic products, car repair paint, metal rust, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.04 x 3.00 x 3.00 inches
See On Amazon #9
uxcell LM8UU Linear Ball Bearings 8mm Bore 15mm OD 24mm Length for CNC Machine 3D Printer 4pcs
Asin: B07H93T58J | Model: a18071300ux0260 | PartNumber: a18071300ux0260
[Features] - These Ball Bearing With Two Rubber Dust Sealed To Prevent Ingress Of Dirt, Water And Foreign Matter.
[Applications] - Mechanical Slides, 2-Axis And 3-Axis Tables, Linear Tables, 3D Printers, Ect..
[Capability] - Static Load Capacity (Cor): 265N, Dynamic Load Capacity (Cr): 402N (Recommended Load Is 80% Of Rated Load, Not To Exceed Rated Load.).
[Usage] - Linear Bearings Are Part Of Linear Motion Systems, Often Used In Conjunction With Cylindrical Shafts Or Guideways..
Features
- [SIZE] - Model: LM8UU, 8x15x24mm Metric Double Seal Linear Bearing
- [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways.
- [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter
- [CAPABILITY] - Static Load Capacity (Cor): 265N, Dynamic Load Capacity (Cr): 402N (Recommended load is 80% of rated load, not to exceed rated load.)
- [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 1.97 x 5.51 x 3.94 inches
See On Amazon #10
uxcell TC613 Thrust Needle Roller Bearings with Washers 3/8" Bore 13/16" OD 5/64" Width 2pcs
Asin: B07VXSLK6D | Model: a19043000ux0093 | PartNumber: a19043000ux0093
[Features] - Needle Roller Thrust Bearings Can Accommodate Axial Loads In One Direction Only.
[Capability] - 12.18Kn Static Load Capacity, 4.84Kn Dynamic Load Capacity, 23000Rpm Maximum Rotational Speed.
[Washer] - Combined With 2 Washers For Applications Where Adjacent Machine Components Cannot Serve As Raceways.
[Material] - Chromium Steel Rollers For Heat Tolerance And Durability Under Heavy Loads; Steel Cage Guides And Evenly Spaced Rollers For Reduced Friction, Vibration, And Noise.
Features
- [MODLE] - Bearing Model: TC613 (I.D.=3/8", O.D.=13/16", Thickness=5/64"); Washer Model: TRA613
- [MATERIAL] - Chromium steel rollers for heat tolerance and durability under heavy loads; Steel cage guides and evenly spaced rollers for reduced friction, vibration, and noise
- [FEATURES] - Needle Roller Thrust Bearings can accommodate axial loads in one direction only
- [WASHER] - Combined with 2 washers for applications where adjacent machine components cannot serve as raceways
- [CAPABILITY] - 12.18kN Static Load Capacity, 4.84kN Dynamic Load Capacity, 23000RPM Maximum Rotational Speed
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon
Looking For Something Else?
Search