Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.425" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49CN30 | Model: B10224 | PartNumber: B10224 | Ean: 0662355329139 | UPC: 662355329139
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
Dimensions: 12.00 x 2.00 x 12.00 inches | Weight: 1.00 Pounds
See On Amazon Similar To Bassett MCH4R Series Solid Carbide
#1
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.3" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49CIOE | Model: B10221 | PartNumber: B10221 | Ean: 0662355329078 | UPC: 662355329078
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
Dimensions: 2.76 x 0.51 x 8.23 Inches
See On Amazon #2
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 82 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1) (B10226)
Asin: B00E49CPJW | Model: B10226 | PartNumber: B10226 | Ean: 0662355329177 | UPC: 662355329177
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Dimensions: 0.55 x 3.35 x 0.55 Inches | Weight: 0.00 pounds
See On Amazon #3
Bassett - B10026 MCH-2D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.15" Cutting Length, 1/8" Cutting Diameter, 1-1/2" Length (Pack of 1)
Asin: B00E49C2C2 | Model: B10026 | PartNumber: B10026 | Ean: 0662355328873 | UPC: 662355328873
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material..
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material.
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
Dimensions: 0.39 x 3.31 x 0.39 inches | Weight: 0.01 Pounds
See On Amazon #4
Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 82 Degrees Profile Angle, Chamfer End, 0.36" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49BQY2 | Model: B10018 | PartNumber: B10018 | Ean: 0662355328712 | UPC: 662355328712
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Threading
Dimensions: 0.39 x 3.23 x 0.39 inches
See On Amazon #5
Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 60 Degrees Profile Angle, Chamfer End, 0.45" Cutting Length, 1/4" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49BOW6 | Model: B10017 | PartNumber: B10017 | Ean: 0662355328699 | UPC: 662355328699
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon #6
Bassett MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.425" Cutting Length, 3/8" Cutting Diameter, 2-1/2" Length (Pack of 1)
Asin: B00E49CU5Q | Model: B10229 | PartNumber: B10229 | Ean: 0662355329238 | UPC: 662355329238
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Threading
Dimensions: 0.39 x 3.23 x 0.39 inches | Weight: 0.00 pounds
See On Amazon #7
Bassett B10230 MCH-4D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.58" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E49CVCS | Model: B10230 | PartNumber: B10230 | Ean: 0662355329252 | UPC: 662355329252
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
Dimensions: 0.70 x 0.60 x 3.30 inches | Weight: 0.02 pounds
See On Amazon #8
Bassett SA-43 Cylindrical Solid Carbide Bur, Uncoated (Bright) Finish, Double Cut, Plain End, 1/8" Shank, 1/8" Head Diameter, 9/16" Head Length
Asin: B007V5WYN8 | Model: B54810 | PartNumber: B54810 | Ean: 0662355343678 | UPC: 662355343678
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Hi-Temp Alloys Materials And Stainless Steel.
Made In The Usa.
Double-Cut Style Has Rows Of Cutting Teeth Cut In Two Intersecting Directions For Fast Material Removal And A Rougher Finish.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish
- Applicable for steel, cast iron, hi-temp alloys materials and stainless steel
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries
See On Amazon #9
Bassett-B10225 MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 60 Degrees Profile Angle, Chamfer End, 0.84" Cutting Length, 1/2" Cutting Diameter, 3" Length (Pack of 1)
Asin: B00E49COCU | Model: B10225 | PartNumber: B10225 | Ean: 0662355329153 | UPC: 662355329153
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Threading
Dimensions: 0.55 x 3.35 x 0.55 inches | Weight: 0.28 pounds
See On Amazon #10
Bassett MCH-4R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 4 Flute, 90 Degrees Profile Angle, Chamfer End, 0.75" Cutting Length, 3/4" Cutting Diameter, 4" Length (Pack of 1)
Asin: B00E49D370 | Model: B10236 | PartNumber: B10236 | Ean: 0662355329375 | UPC: 662355329375
Round Shanks Allow Use With A Wide Variety Of Toolholding Systems.
Applicable For Steel, Cast Iron, Nonferrous Material.
Made In The Usa.
When Run In A Counterclockwise Direction (Right-Hand Cut) Spiral Fluted Tools Evacuate Chips Up And Out Of The Cut To Reduce Clogging.
Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings And Are Suitable For A Wide Range Of Applications.
Features
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
- Applicable for steel, cast iron, nonferrous material
- Made in the USA
- See more on Amazon...
Brand: Bassett | Manufacturer: Greenfield Industries, Inc.
See On Amazon
Looking For Something Else?
Search