Adafruit 16-Channel 12-bit PWM/Servo Driver - I C Interface - PCA9685
Asin: B00E4WEXO4 | Model: 815 | PartNumber: 815 | Ean: 5054242029478
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Reverse Polarity Protection On The Terminal Block Input.
This Product Comes With A Fully Tested And Assembled Breakout As Well As 4 Pieces Of 3X4 Male Straight Header (For Servo/Led Plugs), A 2-Pin Terminal Block (For Power) And A Piece Of 6-Pin 0.1" Header (To Plug Into A Breadboard). A Little Light Soldering Will Be Required To Assemble And Customize The Board By Attaching The Desired Headers But It Is A 15 Minute Task That Even A Beginner Can Do. You May Also Use Right-Angle 3X4 Headers.
Dimensions (No Headers Or Terminal Block) 2.5" X 1" X 0.1" (62.5Mm X 25.4Mm X 3Mm) Weight (No Headers Or Terminal Block): 5.5Grams Weight (With 3X4 Headers & Terminal Block): 9Grams.
When We Saw This Chip, We Quickly Realized What An Excellent Add-On This Would Be. Using Only Two Pins, Control 16 Free-Running Pwm Outputs! You Can Even Chain Up 62 Breakouts To Control Up To 992 Pwm Outputs (Which We Would Really Like To See Since It Would Be Glorious).
Features
- It's an I C-controlled PWM driver with a built in clock. That means that, unlike the TLC5940 family, you do not need to continuously send it signal tying up your microcontroller, it's completely free running!
- When we saw this chip, we quickly realized what an excellent add-on this would be. Using only two pins, control 16 free-running PWM outputs! You can even chain up 62 breakouts to control up to 992 PWM outputs (which we would really like to see since it would be glorious)
- Reverse polarity protection on the terminal block input
- Dimensions (no headers or terminal block) 2.5 x 1 x 0.1 (62.5mm x 25.4mm x 3mm) Weight (no headers or terminal block): 5.5grams Weight (with 3x4 headers & terminal block): 9grams
- This product comes with a fully tested and assembled breakout as well as 4 pieces of 3x4 male straight header (for servo/LED plugs), a 2-pin terminal block (for power) and a piece of 6-pin 0.1 header (to plug into a breadboard). A little light soldering will be required to assemble and customize the board by attaching the desired headers but it is a 15 minute task that even a beginner can do. You may also use right-angle 3x4 headers
- See more on Amazon...
Brand: Adafruit | Manufacturer: ADAFRUIT INDUSTRIES
Weight: 0.00 Pounds
See On Amazon Similar To Adafruit 16Channel 12bit PWM Servo
#1
HiLetgo 2pcs PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot
Asin: B07BRS249H | Model: 3-01-1070-2pcs | PartNumber: 3-01-1070-2pcs
Voltage: Dc5-10V Power Supply.
All Pwm Output Lines Have A 220 Ohm Series Resistor Protection And Can Easily Drive Led..
The Pca9685 Chip Is Wrapped In The Center Of The Board.
16-Way Steering Gear Control.
Features
- Communication Interface: IIC
- 16-way steering gear control
- Voltage: DC5-10V power supply
- The PCA9685 chip is wrapped in the center of the board
- All PWM output lines have a 220 ohm series resistor protection and can easily drive LED.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
Teyleten Robot PCA9685 16 Channel 12 bit PWM Servo Motor Driver I2C IIC Module for MG90S SG90 MG995 Compatible with Arduino Raspberry Pi (2pcs)
Asin: B0CNVBWX2M
Frequency: 40-1000Hz;Channel Number: 16 Channel.;Resolution: 12 Bit;Voltage: Dc 5-10V.
Size: 60*25Mm/2.36"*0.98".
I2c Input, Control 16 Pwm Output, You Can Control The 16 Way Servo Motor..
Features
- Using only two pins, control 16 free-running PWM outputs
- I2C input, control 16 PWM output, you can control the 16 way servo motor.
- Frequency: 40-1000Hz;Channel number: 16 channel.;Resolution: 12 bit;Voltage: DC 5-10V
- Size: 60*25mm/2.36*0.98
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.79 x 2.36 x 0.98 Inches
See On Amazon #3
SUNFOUNDER PCA9685 16 Channel 12-bit PWM Servo Driver for Arduino and Raspberry Pi
Asin: B014KTSMLA | Model: miniLCD | PartNumber: miniLCD | Ean: 0701715367203 | UPC: 701715367203
★ Support Using Only Two Pins To Control 16 Free-Running Pwm Outputs – You Can Even Chain Up 62 Breakouts To Control Up To 992 Pwm Outputs.
★ 12-Bit Resolution For Each Output - For Servos, That Means About 4Us Resolution At 60Hz Update Rate.
★ 3 Pin Connectors In Groups Of 4, So You Can Plug In 16 Servos At One Time (Servo Plugs Are Slightly Wider Than 0.1" So You Can Only Stack 4 Next To Each Other On 0.1" Header.
★ 5V Compliant, Which Means You Can Control It From A 3.3V Microcontroller (This Is Good When You Want To Control White Or Blue Leds With 3.4+ Forward Voltages).
Features
- Contain an I2C-controlled PWM driver with a built-in clock. It means, unlike the TLC5940 family, you do not need to continuously send it signals tying up your microcontroller; it's completely free running!
- 5V compliant, which means you can control it from a 3.3V microcontroller (this is good when you want to control white or blue LEDs with 3.4+ forward voltages)
- Support using only two pins to control 16 free-running PWM outputs you can even chain up 62 breakouts to control up to 992 PWM outputs
- 3 pin connectors in groups of 4, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1 so you can only stack 4 next to each other on 0.1 header
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
- See more on Amazon...
Brand: SunFounder | Manufacturer: SunFounder
Dimensions: 0.80 x 5.20 x 4.30 inches | Weight: 0.02 pounds
See On Amazon #4
Dorhea PCA9685 16 Channel 12 Bit PWM Servo Driver Board IIC Interface PCA9685 Module Controller Compatible with Raspberry Pi
Asin: B07RMTN4NZ | Model: 15726-1 | PartNumber: 15726-1 | Ean: 0701715426894 | UPC: 701715426894
Support Using Only Two Pins To Control 16 Free-Running Pwm Outputs ..
12-Bit Resolution For Each Output - For Servos, That Means About 4Us Resolution At 60Hz Update Rate..
3 Pin Connectors In Groups Of 4, So You Can Plug In 16 Servos At One Time ..
5V Compliant, Which Means You Can Control It From A 3.3V Microcontroller And Still Safely Drive Up To 6V Outputs..
Features
- PCA9685 contain an I2C-controlled PWM driver with a built-in clock.
- 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs.
- Support using only two pins to control 16 free-running PWM outputs .
- 3 pin connectors in groups of 4, so you can plug in 16 servos at one time .
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate.
- See more on Amazon...
Brand: DORHEA | Manufacturer: Dorhea
See On Amazon #5
HiLetgo PCA9685 16 Channel 12-Bit PWM Servo Motor Driver IIC Module for Arduino Robot
Asin: B01D1D0CX2 | Model: 3-01-1070 | PartNumber: 3-01-1070 | Ean: 9320689537323
Voltage: Dc5-10V Power Supply.
All Pwm Output Lines Have A 220 Ohm Series Resistor Protection And Can Easily Drive Led.
The Pca9685 Chip Is Wrapped In The Center Of The Board.
16-Way Steering Gear Control.
Features
- Communication Interface: IIC
- 16-way steering gear control
- Voltage: DC5-10V power supply
- The PCA9685 chip is wrapped in the center of the board
- All PWM output lines have a 220 ohm series resistor protection and can easily drive LED
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #6
ALAMSCN 5PCS SG90 9g Servo Motor + 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit DIY Kit for RC Robot Arm Helicopter Airplane Car Boat Remote Control for Arduino for Raspberry pi
Asin: B08L7RQ1JJ | Model: AL12406 | PartNumber: AL12406 | Ean: 0701715442290 | UPC: 701715442290
For Sg90 9G Micro Servo Motor Is Far More Accurate And Safe To Use In Aircraft Which Require Precise Servo Movements And Perfect Centering..
Package Includes: 5Pcs Sg90 9G Micro Servo + 1Pc Pwm Servo Motor Driver. Cost-Effective Kit To Meet Your Diy Needs..
Apply To Remote Control Helicopters, Micro Robot, Robot Arm And Boats. Fit For All Kind Of R/C Toys And Also Make Electronics Diy Based On For Arduino ,For Raspberry Pi..
Its Internal Gearing And Motor Are Also Upgraded To Improve Dead Bandwidth And Centering..
Features
- These SG90 9G micro servo motors have a completely new redesigned PCB and control system to provide more accuracy.
- Its internal gearing and motor are also upgraded to improve dead bandwidth and centering.
- For SG90 9G micro servo motor is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering.
- Apply to remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on for Arduino ,for Raspberry Pi.
- Package includes: 5PCS SG90 9g Micro Servo + 1PC PWM Servo Motor Driver. Cost-effective kit to meet your DIY needs.
- See more on Amazon...
Brand: ALAMSCN | Manufacturer: ALAMSCN
Dimensions: 0.39 x 0.39 x 0.39 inches | Weight: 0.04 pounds
See On Amazon #7
Adafruit 3296 DS1307 Real Time Clock Breakout Board
Asin: B01MG3NEWF | Model: 3296 | PartNumber: 3296 | Ean: 3700386532962, 0717520030621 | UPC: 717520030621
Will Keep Time For 5 Years Or More.
Pcb & Header Are Included.
Features
- Plugs into any breadboard, or you can use wires
- PCB & header are included
- Will keep time for 5 years or more
- See more on Amazon...
First Available: 07/05/2018
Brand: Adafruit | Manufacturer: Adafruit Industries
Dimensions: 1.00 x 3.00 x 2.00 Inches
See On Amazon #8
Adafruit Breakout PWM/Servo Shield 16 Channel 12 Bit
Asin: B00I4WMOGE | Model: 100409 | PartNumber: 100409 | Ean: 0700358508837, 0701980281303, 0700253565003 | UPC: 701980281303, 700253565003, 700358508837
First Available: 08/26/2014
Brand: Adafruit | Manufacturer: Adafruit
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.15 Pounds
See On Amazon #9
PCA9685 16 CH 12Bit PWM Servo Motor Driver Board Controller IIC Interface for Arduino Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ and Robot (2pcs)
Asin: B07WS5XY63 | Ean: 0701715429840 | UPC: 701715429840
Supports Using Only Two Pins To Control 16 Free-Running Pwm Outputs – You Can Even Chain Up 62 Breakouts To Control Up To 992 Pwm Outputs..
12-Bit Resolution For Each Output - For Servos, That Means About 4Us Resolution At An Update Rate Of 60Hz..
3 Pin Connectors In 4 Groups, So You Can Plug In 16 Servos At One Time (Servo Plugs Are Slightly Wider Than 0.1" So You Can Only Stack 4 Adjacent Ones On 0.1"-Hole Female Headers..
5V Compliant, Which Means You Can Control It From A 3.3V Microcontroller And Still Safely Drive Up To 6V Outputs, Which Is Good When You Want To Control White Or Blue Leds With A 3.4V+ Forward Voltage.
Features
- Contains an I2C-controlled PWM driver with a built-in clock. It means, unlike the TLC5940 family, you do not need to continuously send it signals tying up your microcontroller; it's completely free running!
- 5V compliant, which means you can control it from a 3.3V microcontroller and still safely drive up to 6V outputs, which is good when you want to control white or blue LEDs with a 3.4V+ forward voltage
- Supports using only two pins to control 16 free-running PWM outputs you can even chain up 62 breakouts to control up to 992 PWM outputs.
- 3 pin connectors in 4 groups, so you can plug in 16 servos at one time (Servo plugs are slightly wider than 0.1 so you can only stack 4 adjacent ones on 0.1-hole female headers.
- 12-bit resolution for each output - for servos, that means about 4us resolution at an update rate of 60Hz.
- See more on Amazon...
Brand: AITRIP | Manufacturer: AiTrip
See On Amazon #10
KEYESTUDIO 16-Channel 12-bit Servo Motor Driver Board I2C Interface for Arduino R3 Controller
Asin: B0797JK4RW | Model: KS0258 | PartNumber: KS0258 | Ean: 0600346571860 | UPC: 600346571860
Contains Pcb Double Sided Holes, Can Direct To Solder With Components To Build Up Prototyping Circuits.
How To Use: Search For "Keyestudio Wiki Ks0258" In Google Chrome To Get The Wiki Online Tutorial For This Product..
Servo Power Supply Independent V + Input Up To 6V.
Uses I2c Input, Just Occupy A4 And A5 Interface On The Control Board.
Features
- This expansion board can directly stack on the controller R3 board and can drive up to 16 servos
- Uses I2C input, just occupy A4 and A5 interface on the control board
- Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits
- Servo power supply independent V + input up to 6V
- How to use: Search for keyestudio wiki KS0258 in Google Chrome to get the wiki online tutorial for this product.
- See more on Amazon...
Brand: KEYESTUDIO | Manufacturer: keyes
Dimensions: 0.61 x 2.72 x 2.13 Inches | Weight: 0.06 Pounds
See On Amazon
Looking For Something Else?
Search