Milescraft Inc. 8402 AngleFinder
Asin: B00F1ZJHSA | Model: 8402 | PartNumber: 8402 | Ean: 0737888840205 | UPC: 737888840205
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Angle Divider For Easy Miter Saw Setup.
Used For Transferring And Replicating Marks And Angles Accurately- Does Not Provide Exact Angle As Measurement.
Notches For Holding Bar Clamps Upright When Framing.
Finds Angles Between Two Points On Inside Or Outside Corners.
Features
- Retractable edge guides for layout
- Finds angles between two points on inside or outside corners
- Angle divider for easy miter saw setup
- Notches for holding bar clamps upright when framing
- Used for transferring and replicating marks and angles accurately- does not provide exact angle as measurement
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft Inc.
Dimensions: 2.50 x 13.75 x 2.00 inches | Weight: 0.70 pounds
Warranty: 90 days
See On Amazon Similar To Milescraft Inc. 8402 AngleFinder
#1
Milescraft 1408 Guide Rails 55 Inch Rail Extensions for Milescraft 1409 Track Saw Guide. Extend Range to Over 8 Feet. All-Aluminum Construction. Includes 4 Rail Connectors
Asin: B0BVPZJP6T | Model: 1408 | PartNumber: 1408 | Ean: 0737888140800 | UPC: 737888140800
All-Metal Construction Increases Rigidity And Reduces The Flex For A More Accurate Cut.
Not Compatible With Other Track Saw Systems.
The Red Cutting-Strip Acts As A Guide And Helps Reduce Splintering And Chipping.
Includes Hardware To Connect To Existing Tracksawguide Rails..
Features
- Extend the cutting range of your TrackSawGuide to over 100 inches
- Includes hardware to connect to existing TrackSawGuide rails.
- All-metal construction Increases rigidity and reduces the flex for a more accurate cut
- The red cutting-strip acts as a guide and helps reduce splintering and chipping
- Not compatible with other track saw systems
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft
See On Amazon #2
Milescraft 8410 MC-Square300 Imperial Framing Square 12 x 8 Aluminum Carpenter Square for Woodworking with Removeable Fence
Asin: B083N2WSWY | Model: 8410 | PartNumber: 8410 | Ean: 0737888841004 | UPC: 737888841004
Two Quick Angle Finders For 30° And 45°Angles.
Anodized Aluminum Material With 3Mm Thickness.Removable Aluminum Fence.Includes Euro Style Hinge Mounting Holes.
Elongated Notches For Accurate Line Scribing.
12" (300Mm) Square With 1/4″ Notch Spacing.
Features
- Inside and outside scales for measuring and marking the inside and outside of your work piece
- 12 (300mm) square with 1/4 notch spacing
- Two quick angle finders for 30 and 45 angles
- Elongated notches for accurate line scribing
- Anodized aluminum material with 3mm thickness.Removable aluminum fence.Includes Euro Style hinge mounting holes
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft
Warranty: 3 year manufacturer
See On Amazon #3
Milescraft 8406 Exactor - 9-in-1 Multi-Purpose, Measuring and Marking Tool for Woodworking and More
Asin: B071RPGZM9 | Model: 84060003 | PartNumber: 84060003 | Ean: 0737888840601 | UPC: 737888840601
Layouts Aand 3/16 In Reveal.
Transfer Measurements And Scribe.
Depth Gauge, 45 Miter Measurements And Inner And Outer 90 Measurements.
Features
- 9 in 1 measuring and marking tool with built in Dual levels and a sliding bevel
- Depth gauge, 45 miter measurements and inner and outer 90 measurements
- Layouts aand 3/16 in reveal
- Transfer measurements and scribe
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft, Inc.
Dimensions: 1.00 x 8.75 x 5.75 Inches | Weight: 0.35 pounds
Warranty: 1 year limited
See On Amazon #4
Milescraft 8601 Depth Gauge - Measure, Mark and Locate Depth of Blade or Bit on Table Saws, Router Tables, Routers and More, Woodworking
Asin: B0042U6ZD0 | Model: 8601 | PartNumber: 8601 | Ean: 0756655728096, 0737888860104 | UPC: 756655728096, 737888860104
Brass Thumb Knob Allows You To Accurately Tighten Your Measurement Ruler.
Easy View Window Designed For Accurate Setting And Measuring.
Metal Ruler Measures Are Shown In Inches And Millimeters.
Measure, Mark And Locate Blades, Bits, And Fences.
Features
- Self-standing durable frame with wide base feet allows the tool to be self-standing for setting the cutting depth on routers, router tables, tables saws, and more
- Measure, mark and locate blades, bits, and fences
- Brass thumb knob allows you to accurately tighten your measurement ruler
- Metal ruler measures are shown in inches and millimeters
- Easy view window designed for accurate setting and measuring
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft Inc.
Dimensions: 11.81 x 0.39 x 7.87 inches | Weight: 0.26 pounds
Warranty: 3-Year repair or replacement at manufacturer's discretion
See On Amazon #5
Milescraft 14000713 Saw Guide for Circular and Jig Saws
Asin: B0006U66ES | Model: 14000713 | PartNumber: 14000713
Ean: 7844908462507, 7241870801752, 0735090776947, 5448095529696, 0078433238420, 0044914099590, 7336117906007, 0732454341384, 0078433253027, 0785497568539, 0074748323660, 6824917286616, 0893264000301, 0723434580046, 0757073764314, 7131405262908
UPC: 893264000301, 757073764314, 732454341384, 074748323660, 735090776947, 044914099590, 785497568539, 078433253027, 078433238420, 723434580046
Extends Saw Blade Up To 6″ From Edge Of Workpiece With Circular Saws.
4 Metal Bars And Special Clips Accommodate Most Circular And Jig Saws.
Cuts Circles From 4″ To 19″ In Diameter.
Extends Saw Blade Up To 9.5″ From Edge Of Workpiece With Jigsaws.
Features
- Incremental trim feature makes tool-free adjustments by 1/16 inch
- Extends saw blade up to 9.5 from edge of workpiece with Jigsaws
- Extends saw blade up to 6 from edge of workpiece with Circular Saws
- Cuts circles from 4 to 19 in diameter
- 4 metal bars and special clips accommodate most circular and jig saws
- See more on Amazon...
Brand: TIVOLY | Manufacturer: Milescraft Inc.
Dimensions: 16.30 x 7.30 x 1.30 inches | Weight: 1.00 pounds
Warranty: Three-Year Limited Warranty
See On Amazon #6
Milescraft 1327 Pocket Jig 400 Self-Clamping, Heavy-Duty, All-Metal Pocket Hole Jig. Complete Kit with Bit, Driver, and Screws
Asin: B0BL2HM78Q | Model: 1327 | PartNumber: 1327 | Ean: 0737888132706 | UPC: 737888132706
Laser Etched Markings In Inches And Metric.
Convenient Storage Drawer Holds Bit, Driver, Depth Stops, And More.
L-Base Can Be Removed From Main Body And Used For Mobile Pocket Hole Projects And Repairs.
Steel Toggle Clamp With Micro-Adjust Clamp-Head Dials In Perfect Clamping Pressure For Different Board Thicknesses.
Drill Guides Adjust Horizontally To Position Holes Between 3/4” And 3” Apart.
Features
- Height adjustable bushing blocks contain two, 3/8" steel drill guides that can be positioned for drilling boards from 1/2 up to 1-1/2 thick
- Drill guides adjust horizontally to position holes between 3/4 and 3 apart
- Laser etched markings in inches and metric
- Steel toggle clamp with micro-adjust clamp-head dials in perfect clamping pressure for different board thicknesses
- Convenient storage drawer holds bit, driver, depth stops, and more
- L-Base can be removed from main body and used for mobile pocket hole projects and repairs
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft
See On Amazon #7
Milescraft 7366 Corner Square Kit - 90 Corner Clamping Positioning/Assembly Squares. 8in. and 4in. Works on Interior or Exterior Corners. Non-Marring Material. (8pc)
Asin: B0CGKGFZH1 | Model: 7366 | PartNumber: 7366 | Ean: 0737888736607 | UPC: 737888736607
Clampsquares 4 In. X 4 In. Fit Into Smaller Projects For Support..
For Use With: Bar Clamps, C-Clamps, F-Clamps, Fence Clamps And Track Clamps.
Patented Dovetail Tracks Are Compatible With The Milescraft 4012 Squareclampkit.
Clampsquares 8 In. X 8 In. Durable Body Is Perfect For 90° Clamping Projects.
Features
- Perfect for assembly of: cabinets, boxes, shelves, picture frames, pocket holes, drawers and more
- ClampSquares 8 in. x 8 in. durable body is perfect for 90 clamping projects
- ClampSquares 4 in. x 4 in. fit into smaller projects for support.
- Patented dovetail tracks are compatible with the Milescraft 4012 SquareClampKit
- For use with: bar clamps, C-clamps, F-clamps, fence clamps and track clamps
- See more on Amazon...
Brand: Milescraft Inc. | Manufacturer: Milescraft
See On Amazon #8
Milescraft 8404 Framing Square 300 Imperial Framing Square 12 x 8 Steel Carpenter Square for Woodworking with Removeable Fence
Asin: B014A1Z54K | Model: 8404 | PartNumber: 8404 | Ean: 0737888840403 | UPC: 737888840403
Reference Measurements For Precise Woodworking.
Two Quick Angle Finders Built In For 30 And 45 Degrees.
Built In Retractable Edge Guide.
Use To Layout A Square Or Right Angle.
Features
- 12" (300mm) x 8" (200mm)
- Use to layout a square or right angle
- Reference measurements for precise woodworking
- Built in retractable edge guide
- Two quick angle finders built in for 30 and 45 degrees
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft Inc.
Dimensions: 0.50 x 12.00 x 7.88 inches | Weight: 0.84 Pounds
Warranty: 1 year
See On Amazon #9
Milescraft 8454 FramingSquare300 (Metric)
Asin: B014A1Z4KU | Model: 8454 | PartNumber: 8454 | Ean: 0737888845408 | UPC: 737888845408
Has Three Quick Angle Finders For 30Degree, 45Degree And 60Degree.
Please Review Specifications To Ensure This Product Will Meet Your Project’S Dimensional Requirements (Imperial Or Metric Units).
Includes Euro Style Hinge Mounting Holes.
Features
- Built in retractable edge guide
- Includes Euro Style hinge mounting holes
- Has three quick angle finders for 30Degree, 45Degree and 60Degree
- Please review specifications to ensure this product will meet your project s dimensional requirements (Imperial or Metric Units)
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft Inc.
Dimensions: 0.50 x 11.75 x 7.88 inches
See On Amazon #10
MILESCRAFT Standard DrillBlock Drilling Guide
Asin: B07QN4R2G5 | Model: 2410769 | PartNumber: 2410769 | Ean: 0737888131204 | UPC: 737888131204
Built-In Vertical And Horizontal Centerlines For Accurate Alignment.
Non-Slip Feet, Prevents Slipping And Marring On The Work Surface.
Six Common Drill Bit Sizes: 1/8 In., 3/16 In., 1/4 In., 5/16 In., 3/8 In. And 1/2 In.
Features
- Built-in V-groove for drilling on cylindrical Stock
- Six common drill bit sizes: 1/8 In., 3/16 In., 1/4 In., 5/16 In., 3/8 In. and 1/2 In
- Built-in vertical and horizontal centerlines for accurate alignment
- Non-slip feet, prevents slipping and marring on the work surface
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft
Dimensions: 1.45 x 2.70 x 8.00 inches | Weight: 0.29 Pounds
Warranty: 1 year limited
See On Amazon #11
Milescraft 1321 PocketJig100 Kit
Asin: B06XYVSN4W | Model: 1321 | PartNumber: 1321 | Ean: 0737888132102 | UPC: 737888132102
No Fence And Small Design Allow You To Get Into Some Of The Smallest Places To Make Repairs To Many Joints.
Tight Tolerances Between The Bushings And The Drill Bit, Reduce Tear-Out And Create A Clean Pocket Hole On The First Try.
Hardened Steel Drill Bushings Allow For Precise Pocket Holes Every Time Using The Milescraft Pocketbit.
Includes A Clamping Magnet To Allow You To Easily Secure The Jig To Your Work Piece Using Any Standard Metal Clamp; For Speed And Accuracy, Use The Milescraft 3" Faceclamp.
Features
- There are 4 common board thickness settings built into the jig (1/2", 3/4", 1" and 1-1/2") with easy reference marks to mark your board thickness and set your jig
- Includes a clamping magnet to allow you to easily secure the jig to your work piece using any standard metal clamp; for speed and accuracy, use the Milescraft 3 FaceClamp
- No fence and small design allow you to get into some of the smallest places to make repairs to many joints
- Hardened steel drill bushings allow for precise pocket holes every time using the Milescraft PocketBit
- Tight tolerances between the bushings and the drill bit, reduce tear-out and create a clean pocket hole on the first try
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft, Inc.
Dimensions: 7.00 x 0.50 x 0.25 inches | Weight: 0.40 Pounds
Warranty: 3 year limited
See On Amazon #12
Milescraft 8408 Center Finder - Center Scriber and Offset Measuring & Marking Tool for Woodworking & 8409 MC-Square150 (Imperial) - Aluminum Framing and Woodworking Square, 1 Pack
Asin: B0C7Q4V3FQ
Product 1: Notches For Offset Marking Let You Scribe Off-Center Lines.
Product 2: Two Quick Angle Finders For 30° And 45°Angles.
Product 2: Elongated Notches For Accurate Line Scribing.
Product 2: Inside And Outside Scales For Measuring And Marking The Inside And Outside Of Your Work Piece.
Product 2: 6” (150Mm) Square With 1/4″ Notch Spacing.
Product 1: Rare Earth Magnet Allows For Easy Storage On Any Metal Surface.
Product 1: Offsets Range From 1/16” To 5/8”, In Ten 1/16Th Inch Increments.
Features
- Product 1: Center hole holds the pencil in a perfectly centered position as you scribe your line
- Product 1: Offsets range from 1/16 to 5/8 , in ten 1/16th inch increments
- Product 1: Notches for offset marking let you scribe off-center lines
- Product 1: Rare Earth magnet allows for easy storage on any metal surface
- Product 2: Inside and outside scales for measuring and marking the inside and outside of your work piece
- Product 2: 6 (150mm) square with 1/4 notch spacing
- Product 2: Two quick angle finders for 30 and 45 angles
- Product 2: Elongated notches for accurate line scribing
- See more on Amazon...
Brand: Milescraft
See On Amazon #13
Milescraft 1318 DrillMate Portable Drill Guide - Multi-Angle Drill Guide Attachment & 8408 CenterFinder - Center Scriber and Offset Measuring & Marking Tool
Asin: B0B7MKCYZW | Model: 1318 | PartNumber: 1318
Product 1: Angle Cuts Of 45 Degree To 90 Degrees, With A Built In Angle Read Out In The All Metal Base.
Product 2: Notches For Offset Marking Let You Scribe Off-Center Lines.
Product 2: Rare Earth Magnet Allows For Easy Storage On Any Metal Surface.
Product 2: Center Hole Holds The Pencil In A Perfectly Centered Position As You Scribe Your Line.
Product 2: Offsets Range From 1/16” To 5/8”, In Ten 1/16Th Inch Increments.
Product 1: Centering Channels Built Into The Bottom Of The Base, To Accommodate Drilling Any Round Stock Up To 3 Inches In Diameter.
Product 1: Attaches To All 3/8" And 1/2" Power Drills And It Also Includes A 3/8" Capacity Chuck With Key.
Features
- Product 1: Perfect for straight or angled drilling, drilling on the edge of a board or on round stock
- Product 1: Attaches to all 3/8 And 1/2 Power drills and it also includes a 3/8 Capacity chuck with key
- Product 1: Angle cuts of 45 Degree to 90 degrees, with a built in angle read out in the all metal base
- Product 1: Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter
- Product 2: Center hole holds the pencil in a perfectly centered position as you scribe your line
- Product 2: Offsets range from 1/16 to 5/8 , in ten 1/16th inch increments
- Product 2: Notches for offset marking let you scribe off-center lines
- Product 2: Rare Earth magnet allows for easy storage on any metal surface
- See more on Amazon...
Brand: Milescraft
See On Amazon #14
Milescraft 1312 Drill Block + Milescraft 8408 Center Finder
Asin: B0BKQBVD74
The Bundle Includes A Drill Block, Center Finder, Pencil, And Rare Earth Magnet For Storage..
The Center Finder (Product 2) Can Quickly And Accurately Mark Centerlines And Offsets From 1/16" To 5/8" On Boards Up To 2-1/2" Thick..
Features
- The Drill Block (product 1) allows drilling straight holes up to 1/2" diameter into various surfaces using non-slip feet and v-grooves.
- The Center Finder (product 2) can quickly and accurately mark centerlines and offsets from 1/16 to 5/8 on boards up to 2-1/2 thick.
- The bundle includes a Drill Block, Center Finder, pencil, and rare earth magnet for storage.
- See more on Amazon...
Brand: Milescraft
See On Amazon #15
Milescraft AngleFinder and Trim Carpentry Aid Bundle
Asin: B0BKQBTQDB
The Anglefinder Has Angle Divider For Easy Miter Saw Setup And Notches For Holding Bar Clamps Upright When Framing..
Both The Anglefinder And Trim45 Have Built-In Magnets, Slots And 45 Degree Angled Heads For Easy And Accurate Measurements..
The Trim45 Has An Adjustable Reveal Setting From 1/8" To 1/2", In 1/8" Increments Allowing Versatility..
The Trim45 Eliminates Fumbling With Tape Measures When Determining Length Of Finish Trim With Its Unique Measuring And Marking Device..
Features
- The AngleFinder finds angles between two points on inside or outside corners with retractable edge guides for layout.
- The Trim45 eliminates fumbling with tape measures when determining length of finish trim with its unique measuring and marking device.
- The AngleFinder has angle divider for easy miter saw setup and notches for holding bar clamps upright when framing.
- The Trim45 has an adjustable reveal setting from 1/8 to 1/2, in 1/8 increments allowing versatility.
- Both the AngleFinder and Trim45 have built-in magnets, slots and 45 degree angled heads for easy and accurate measurements.
- See more on Amazon...
Brand: Milescraft
See On Amazon #16
Milescraft Inc. 8402 AngleFinder & 8408 Center Finder - Center Scriber and Offset Measuring & Marking Tool for Woodworking
Asin: B0BKQDZ77S
Product 1: Angle Divider For Easy Miter Saw Setup.
Product 2: Notches For Offset Marking Let You Scribe Off-Center Lines.
Product 2: Rare Earth Magnet Allows For Easy Storage On Any Metal Surface.
Product 2: Center Hole Holds The Pencil In A Perfectly Centered Position As You Scribe Your Line.
Product 2: Offsets Range From 1/16” To 5/8”, In Ten 1/16Th Inch Increments.
Product 1: Notches For Holding Bar Clamps Upright When Framing.
Product 1: Finds Angles Between Two Points On Inside Or Outside Corners.
Features
- Product 1: Retractable edge guides for layout
- Product 1: Finds angles between two points on inside or outside corners
- Product 1: Angle divider for easy miter saw setup
- Product 1: Notches for holding bar clamps upright when framing
- Product 2: Center hole holds the pencil in a perfectly centered position as you scribe your line
- Product 2: Offsets range from 1/16 to 5/8 , in ten 1/16th inch increments
- Product 2: Notches for offset marking let you scribe off-center lines
- Product 2: Rare Earth magnet allows for easy storage on any metal surface
- See more on Amazon...
Brand: Milescraft
See On Amazon #17
Milescraft Track Saw Guide and Pocket Jig 400 Bundle
Asin: B0CF2C44J5
All Metal Construction On Track Saw Guide And Pocket Jig Increases Rigidity And Reduces Flex For Accuracy (Both)..
Storage Drawer In Pocket Jig Holds Bit, Driver, Depth Stops And More Accessories..
Includes Laser Etched Metric And Inch Markings On Pocket Jig..
50 Inch Expandable Cutting Range On Track Saw Guide And Adjustable Pocket Jig Distances Between 3/4 Inch And 3 Inches Apart (Milescraft Pocket Jig 400)..
Features
- Universal track saw guide fits most circular saws with blades up to 7-1/4 inches and adjustable pocket jig fits boards from 1/2 inch to 1-1/2 inches thick (Milescraft Track Saw Guide).
- 50 inch expandable cutting range on track saw guide and adjustable pocket jig distances between 3/4 inch and 3 inches apart (Milescraft Pocket Jig 400).
- All metal construction on track saw guide and pocket jig increases rigidity and reduces flex for accuracy (Both).
- Includes laser etched metric and inch markings on pocket jig.
- Storage drawer in pocket jig holds bit, driver, depth stops and more accessories.
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft
See On Amazon #18
Milescraft Inc. 8402 AngleFinder & 1405 Crown45 - Crown Molding Tool, Yellow & 8401 TRIM45 Trim Carpentry Aid
Asin: B0CZLH2G6B
Product 1: Angle Divider For Easy Miter Saw Setup.
Product 3: The Trim45 Trim Carpentry Aid Is The Handiest Tool In The Toolbox When It Comes To Installing Door And Window Casement Trim.
Product 3: Unique Measuring And Marking Device Eliminates Fumbling With Tape Measures When Determining Length Of Finish Trim.
Product 2: Makes Right-Side-Up Cutting Of 2″ To 5-1/2″ Crown Molding.
Product 2: Supports Crown Molding Between 2″ To 5-1/2″.
Product 2: Compact Design Works With Most Miter Saws.
Product 3: Unique To The Trim45 Is An Adjustable Reveal Setting Ranging From 1/8" To 1/2", In 1/8" Increments.
Product 1: Finds Angles Between Two Points On Inside Or Outside Corners.
Features
- Product 1: Retractable edge guides for layout
- Product 1: Finds angles between two points on inside or outside corners
- Product 1: Angle divider for easy miter saw setup
- Product 2: Compact design works with most miter saws
- Product 2: Makes right-side-up cutting of 2 to 5-1/2 Crown molding
- Product 2: Supports Crown molding between 2 to 5-1/2
- Product 3: The Trim45 trim carpentry aid is the handiest tool in the toolbox when it comes to installing door and window casement trim
- Product 3: Unique measuring and marking device eliminates fumbling with tape measures when determining length of finish trim
- Product 3: Unique to the Trim45 is an adjustable reveal setting ranging from 1/8 to 1/2, in 1/8 increments
- See more on Amazon...
Brand: Milescraft
See On Amazon #19
Milescraft 1409 Track Saw Guide Universal Compatibility for Circular Saws with Blades up to 7-1/4 . & 8408 Center Finder - Center Scriber and Offset Measuring & Marking Tool for Woodworking
Asin: B0CR9WSR8T
Product 1: All-Metal Construction Increases Rigidity And Reduces The Flex For A More Accurate Cut.
Product 2: Notches For Offset Marking Let You Scribe Off-Center Lines.
Product 2: Rare Earth Magnet Allows For Easy Storage On Any Metal Surface.
Product 2: Center Hole Holds The Pencil In A Perfectly Centered Position As You Scribe Your Line.
Product 2: Offsets Range From 1/16” To 5/8”, In Ten 1/16Th Inch Increments.
Product 1: The Red Cutting-Strip Acts As A Guide And Helps Reduce Splintering And Chipping.
Product 1: Cuts 50” Out Of The Box, Or Extends To Any Length Required With Optional Guiderail Extensions To Rip Entire Sheets.
Features
- Product 1: Universal compatibility fits most circular saws in the market with blades up to 7-1/4
- Product 1: Cuts 50 out of the box, or extends to any length required with optional GuideRail extensions to rip entire sheets
- Product 1: All-metal construction Increases rigidity and reduces the flex for a more accurate cut
- Product 1: The red cutting-strip acts as a guide and helps reduce splintering and chipping
- Product 2: Center hole holds the pencil in a perfectly centered position as you scribe your line
- Product 2: Offsets range from 1/16 to 5/8 , in ten 1/16th inch increments
- Product 2: Notches for offset marking let you scribe off-center lines
- Product 2: Rare Earth magnet allows for easy storage on any metal surface
- See more on Amazon...
Brand: Milescraft
See On Amazon
Looking For Something Else?
Search